Water-Gas Shift Reaction on a Highly Active Inverse CeOx/Cu(111) Catalyst: Unique Role of Ceria Nanoparticles

Adsorbate-driven morphological changes on Cu(111) nano-pits

Healing of a metal surface by formation of a sub-surface hydride.

TiO2@CeOx core-shell nanoparticles as artificial enzymes with peroxidase-like activity

The Ce4+↔Ce3+ redox switch is at the basis of an all-inorganic catalytic cycle that is capable of mimicking the activity of several natural redox enzymes. The efficiency of these artificial enzymes (nanozymes) strongly depends on the Ce4+/Ce3+ ratio. By capitalizing on the results obtained on oxide/oxide model systems, we implemented a simple and effective procedure to obtain conformal TiO2@CeOx core-shell nanoparticles whose thickness is controlled with single-layer precision. Since the Ce3+ species are stabilized only at the interface by the electronic hybridization with the TiO2 states, the modulation of the shell thickness offers a simple method to tailor the Ce4+/Ce3+ ratio and therefore the catalytic properties. The activity of these nanoparticles as artificial peroxidase-like enzymes was tested, showing exceptional performances, even better than natural horseradish peroxidase enzyme. The main advantage with respect to other oxide/oxide nanozymes is that our nanoparticles, having a tunable Ce4+/Ce3+ ratio, are efficient already at low H2O2 concentrations.

Engineering nanointerfaces for nanocatalysis

We focus on recent advances in the delicate design of well-defined nanointerfaces to promote nanocatalysis towards renewable energy.

Mechanisms for CO oxidation on Fe(iii)–OH–Pt interface: a DFT study

The full catalytic cycle that involves the oxidation of two CO molecules is investigated here by using periodic density functional calculations. To simulate the nature of Fe(OH)_x/Pt nanoparticles, three possible structural models, i.e., Fe(OH)_x/Pt(111), Fe(OH)_x/Pt(332) and Fe(OH)_x/Pt(322), are built. We demonstrate that Fe(iii)–OH–Pt stepped sites readily react with CO adsorbed nearby to directly yield CO₂ and simultaneously produce coordinatively unsaturated iron sites for O₂ activation. By contrast, the created interfacial vacancy on Fe(OH)_x/Pt(111) prefers to adsorb CO rather than O₂, thus inhabiting the catalytic cycles of CO oxidation. We suggest that such structure sensitivity can be understood in terms of the bond strengths of Fe(iii)–OH.

The effect of carbon monoxide Co-adsorption on Ni-catalysed water dissociation

The effect of carbon monoxide (CO) co-adsorption on the dissociation of water on the Ni(111) surface has been studied using density functional theory. The structures of the adsorbed water molecule and of the transition state are changed by the presence of the CO molecule. The water O-H bond that is closest to the CO is lengthened compared to the structure in the absence of the CO, and the breaking O-H bond in the transition state structure has a larger imaginary frequency in the presence of CO. In addition, the distances between the Ni surface and H2O reactant and OH and H products decrease in the presence of the CO. The changes in structures and vibrational frequencies lead to a reaction energy that is 0.17 eV less exothermic in the presence of the CO, and an activation barrier that is 0.12 eV larger in the presence of the CO. At 463 K the water dissociation rate constant is an order of magnitude smaller in the presence of the CO. This reveals that far fewer water molecules will dissociate in the presence of CO under reaction conditions that are typical for the water-gas-shift reaction.

Unique properties of ceria nanoparticles supported on metals: novel inverse ceria/copper catalysts for CO oxidation and the water-gas shift reaction

Oxides play a central role in important industrial processes, including applications such as the production of renewable energy, remediation of environmental pollutants, and the synthesis of fine chemicals. They were originally used as catalyst supports and were thought to be chemically inert, but now they are used to build catalysts tailored toward improved selectivity and activity in chemical reactions. Many studies have compared the morphological, electronic, and chemical properties of oxide materials with those of unoxidized metals. Researchers know much less about the properties of oxides at the nanoscale, which display distinct behavior from their bulk counterparts. More is known about metal nanoparticles. Inverse-model catalysts, composed of oxide nanoparticles supported on metal or oxide substrates instead of the reverse (oxides supporting metal nanoparticles), are excellent tools for systematically testing the properties of novel catalytic oxide materials. Inverse models are prepared in situ and can be studied with a variety of surface science tools (e.g. scanning tunneling microscopy, X-ray photoemission spectroscopy, ultraviolet photoemission spectroscopy, low-energy electron microscopy) and theoretical tools (e.g. density functional theory). Meanwhile, their catalytic activity can be tested simultaneously in a reactor. This approach makes it possible to identify specific functions or structures that affect catalyst performance or reaction selectivity. Insights gained from these tests help to tailor powder systems, with the primary objective of rational design (experimental and theoretical) of catalysts for specific chemical reactions. This Account describes the properties of inverse catalysts composed of CeOx nanoparticles supported on Cu(111) or CuOx/Cu(111) as determined through the methods described above. Ceria is an important material for redox chemistry because of its interchangeable oxidation states (Ce⁴⁺ and Ce³⁺). Cu(111), meanwhile, is a standard catalyst for reactions such as CO oxidation and the water-gas shift (WGS). This metal serves as an ideal replacement for other noble metals that are neither abundant nor cost effective. To prepare the inverse system we deposited nanoparticles (2-20 nm) of cerium oxide onto the Cu(111) surface. During this process, the Cu(111) surface grows an oxide layer that is characteristic of Cu₂O (Cu¹⁺). This oxide can influence the growth of ceria nanoparticles. Evidence suggests triangular-shaped CeO₂(111) grows on Cu₂O(111) surfaces while rectangular CeO₂(100) grows on Cu₄O₃(111) surfaces. We used the CeOx/Cu₂O/Cu(111) inverse system to study two catalytic processes: the WGS (CO + H₂O → CO₂ + H₂) and CO oxidation (2CO + O₂ → 2CO₂). We discovered that the addition of small amounts of ceria nanoparticles can activate the Cu(111) surface and achieve remarkable enhancement of catalytic activity in the investigated reactions. In the case of the WGS, the CeOx nanoparticle facilitated this process by acting at the interface with Cu to dissociate water. In the CO oxidation case, an enhancement in the dissociation of O₂ by the nanoparticles was a key factor. The strong interaction between CeOx nanoparticles and Cu(111) when preoxidized and reduced in CO resulted in a massive surface reconstruction of the copper substrate with the introduction of microterraces that covered 25-35% of the surface. This constitutes a new mechanism for surface reconstruction not observed before. These microterraces helped to facilitate a further enhancement of activity towards the WGS by opening an additional channel for the dissociation of water. In summary, inverse catalysts of CeOx/Cu(111) and CeO₂/Cu₂O/Cu(111) demonstrate the versatility of a model system to obtain insightful knowledge of catalytic processes. These systems will continue to offer a unique opportunity to probe key catalytic components and elucidate the relationship between structure and reactivity of novel materials and reactions in the future.

CO Oxidation at the Interface of Au Nanoclusters and the Stepped-CeO2(111) Surface by the Mars-van Krevelen Mechanism

DFT+U calculations of CO oxidation by Au12 nanoclusters supported on a stepped-CeO2(111) surface show that lattice oxygen at the step edge oxidizes CO bound to Au NCs by the Mars-van Krevelen (M-vK) mechanism. We found that CO2 desorption determines the rate of CO oxidation, and the vacancy formation energy is a reactivity descriptor for CO oxidation. Our results suggest that the M-vK mechanism contributes significantly to CO oxidation activity at Au particles supported on the nano- or meso-structured CeO2 found in industrial catalysts.

Density functional study of water-gas shift reaction on M3O(3x)/Cu(111)

Density functional theory (DFT) was employed to study the water dissociation and water-gas shift (WGS) reaction on a series of inverse model catalysts, M(3)O(3x)/Cu(111) (M = Mg, Ti, Zr, Mo, W; x = 1, 2, 3). It has been found that the WGS reaction on Cu can be facilitated by introducing various oxides to lower the barrier of water dissociation. Accordingly, the calculated reaction energy for water dissociation was used as a scaling descriptor to screen the WGS activity of oxide-Cu model catalysts. Our calculations show that the activity towards water dissociation decreases in a sequence: Mg(3)O(3)/Cu(111) > Zr(3)O(6)/Cu(111) > Ti(3)O(6)/Cu(111) > W(3)O(9)/Cu(111), Mo(3)O(9)/Cu(111). It seems that Mg(3)O(3)/Cu(111) is the best WGS catalyst among the systems studied here, being able to dissociate water with no barrier. During the process, both Cu and oxides participate in the reaction directly. The strong M(3)O(3x)-Cu interaction is able to tune the electronic structure of M(3)O(3x) and therefore the activity towards water dissociation. Further studies of the overall WGS reaction on Mg(3)O(3)/Cu(111) show that water dissociation may not be the key step to control the WGS reaction on Mg(3)O(3)/Cu(111) and the removal of H from Mg(3)O(3) can be problematic. The strong interaction between H and O from Mg(3)O(3) blocks the O sites for further water dissociation and therefore the WGS reaction. Our study observes a very different behavior of oxide clusters in such small size from the bigger ones supported on Cu(111) and provides new insight into the rational design of the WGS catalysts.

Nanopattering in CeOx/Cu(111): A New Type of Surface Reconstruction and Enhancement of Catalytic Activity

Our results indicate that small amounts of an oxide deposited on a stable metal surface can trigger a massive surface reconstruction under reaction conditions. In low-energy electron microscopy (LEEM) experiments, no reconstruction of Cu(111) is observed after chemisorbing oxygen or after reducing O/Cu(111) in a CO atmosphere. On the other hand, LEEM images taken in situ during the reduction of CeO2/CuO1-x/Cu(111) show a complex nonuniform transformation of the surface morphology. Ceria particles act as nucleation sites for the growth of copper microterraces once CuO1-x is reduced. Can this reconstructed surface be used to enhance the catalytic activity of inverse oxide/metal catalysts? Indeed, CeOx on reconstructed Cu(111) is an extremely active catalyst for the water-gas shift process (CO + H2O → H2 + CO2), with the Cu microterraces providing very efficient sites for the dissociation of water and subsequent reaction with CO.

Identification of 5-7 defects in a copper oxide surface

A topological defect in a Cu(2)O surface oxide grown on Cu(111) has been identified. Using scanning tunneling microscopy, we observed the formation of pentagonal and heptagonal rings within the Cu(2)O surface oxide. These structures break the symmetry of the hexagonal oxide surface and are a consequence of the presence of oxygen vacancies in the Cu(2)O surface. We propose that the pentagonal and heptagonal rings are formed through the rotation of a -O-Cu-O- chain in a manner similar to the Stone-Wales transformation. The proposed transformation is supported by the results of density functional theory calculations.

Water-gas shift reaction on oxide∕Cu(111): Rational catalyst screening from density functional theory

Developing improved catalysts based on a fundamental understanding of reaction mechanism has become one of the grand challenges in catalysis. A theoretical understanding and screening the metal-oxide composite catalysts for the water-gas shift (WGS) reaction is presented here. Density functional theory was employed to identify the key step for the WGS reaction on the Au, Cu-oxide catalysts, where the calculated reaction energy for water dissociation correlates well with the experimental measured WGS activity. Accordingly, the calculated reaction energy for water dissociation was used as the scaling descriptor to screen the inverse model catalysts, oxide∕Cu(111), for the better WGS activity. Our calculations predict that the WGS activity increases in a sequence: Cu(111), ZnO∕Cu(111) < TiO(2)∕Cu(111), ZrO(2)∕Cu(111) < MoO(3)∕Cu(111). Our results imply that the high performances of Au, Cu-oxide nanocatalysts in the WGS reaction rely heavily on the direct participation of both oxide and metal sites. The degree that the oxide is reduced by Cu plays an important role in determining the WGS activity of oxide∕Cu catalysts. The reducible oxide can be transformed from the fully oxidized form to the reduced form due to the interaction with Cu and, therefore, the transfer of electron density from Cu, which helps in releasing the bottleneck water dissociation and, therefore, facilitating the WGS reaction on copper.