Progress in the development of interpenetrating polymer network hydrogels

A Combined Approach of Double Network Hydrogel and Nanocomposites Based on Hyaluronic Acid and Poly(ethylene glycol) Diacrylate Blend

In this study, an innovative polymer blend, based on double network (DN) approach, has been developed by integrating a poly(ethylene glycol) diacrylate (PEGDA) network into a chemically modified hyaluronic acid sodium salt (HAs) hydrogel matrix. Here, the HAs was chemically functionalized with photocrosslinkable moieties by reacting with maleic anhydride (MAA) to obtain a maleated hyaluronic acid (MaHA). Furthermore, nanocomposite DN hydrogels were suitably prepared by physical blending of hydroxyapatite nanoparticles (HAp), obtained by sol-gel synthesis, within the hydrogel. Physico-chemical, thermal, morphological and mechanical analyses were performed. Results showed enhanced mechanical properties and a homogenous microstructure as highlighted by mechanical and morphological investigations. This suggests that nanocomposite DN hydrogels are promising candidates for biomedical applications.

Implementation of two distinct wavelengths to induce multistage polymerization in shape memory materials and nanoimprint lithography

Here, a process is introduced for forming dual stage thiol-Michael/acrylate hybrid networks photocured by two different wavelengths, demonstrating its use in nanoimprint lithography (NIL) and shape memory materials. Initiated with a visible light sensitive photobase and a UV-sensitive radical initiator, thiol-Michael-acrylate hybrid polymerizations were programmed to proceed sequentially and orthogonally, with base-catalyzed thiol-Michael photopolymerization as the first stage and radical mediated acrylate photopolymerization as the second stage. By regulating the photopolymerization formulations, i.e. thiol-to-acrylate ratios, initiator loadings and irradiation conditions, a series of materials with highly tunable mechanical performance was achieved, with ultimate Tg values ranging from 23 to 70 °C. With a photopatternable first stage and a readily reconfigurable second stage, its implementation in nanoimprint lithography (NIL) enabled surface features on the scale of 10 nm to be formed on a photopatterned substrate. Additionally, the dual stage polymer results in a relatively homogenous polymer network with a narrow glass transition temperature (Tg), which enables rapid response in applications as shape memory materials, with shape-fixity values above 95% and shaperecovery values above 99%. With its unique photocuring process and programmable mechanical properties, the two color light controlled photopolymerization can be exploited as a useful tool in a wide range of materials science applications.

Fabrication of a Double-Cross-Linked Interpenetrating Polymeric Network (IPN) Hydrogel Surface Modified with Polydopamine to Modulate the Osteogenic Differentiation of Adipose-Derived Stem Cells

Hydrogel surface properties can be modified to form bioactive interfaces to modulate the osteogenic differentiation of stem cells. In this work, a hydrogel made of gelatin methacrylamide (GelMA) and alginate was designed and tested as a scaffold to control stem-cell osteogenic differentiation. The hydrogel's surface was treated with polydopamine (pDA) to create an adhesive layer for the adsorption of the osteoinductive drug dexamethasone (Dex). The presence of the pDA coating enhanced Dex adsorption and retention over 21 days. This effect resulted in a delay in the osteogenic differentiation of hASCs cultured on the hydrogel treated with a pDA layer.

Supramolecular poly(acrylic acid)/F127 hydrogel with hydration-controlled nitric oxide release for enhancing wound healing

Topical nitric oxide (NO) delivery has been shown to accelerate wound healing. However, delivering NO to wounds at appropriate rates and doses requires new biomaterial-based strategies. Here, we describe the development of supramolecular interpolymer complex hydrogels comprising PEO-PPO-PEO (F127) micelles embedded in a poly(acrylic acid) (PAA) matrix, with S-nitrosoglutathione (GSNO) molecules dissolved in the hydrophilic domain. We show that PAA:F127/GSNO hydrogels start releasing NO upon hydration at rates controlled by their rates of water absorption. SAXS measurements indicate that the supramolecular structure of the hydrogels retains long-range order domains of F127 micelles. The PAA/F1227 hydrogels displayed dense morphologies and reduced rates of hydration. The NO release rates remain constant over the first 200 min, are directly correlated with the hydration rates of the PAA:F127/GSNO hydrogels, and can be modulated in the range of 40 nmol/g h to 1.5 μmol/g h by changing the PAA:F127 mass ratio. Long-term NO-release profiles over 5 days are governed by the first-order exponential decay of GSNO, with half-lives in the range of 0.5-3.4 days. A preliminary in vivo study on full-thickness excisional wounds in mice showed that topical NO release from the PAA:F127/GSNO hydrogels is triggered by exudate absorption and leads to increased angiogenesis and collagen fiber organization, as well as TGF-β, IGF-1, SDF-1, and IL-10 gene expressions in the cicatricial tissue. In summary, these results suggest that hydration-controlled NO release from topical PAA:F127/GSNO hydrogels is a potential strategy for enhancing wound healing.

STATEMENT OF SIGNIFICANCE

The topical delivery of nitric oxide (NO) to wounds may provide significant beneficial results and represent a promising strategy to treat chronic wounds. However, wound dressings capable of releasing NO after application and allowing the modulation of NO release rates, demand new platforms. Here, we describe a novel strategy to overcome these challenges, based on the use of supramolecular poly(acrylic acid) (PAA):F127 hydrogels charged with the NO donor S-nitrosoglutathione (GSNO) from whereby the NO release can be triggered by exudate absorption and delivered to the wound at rates controlled by the PAA:F127 mass ratio. Preliminary in vivo results offer a proof of concept for this strategy by demonstrating increased angiogenesis; collagen fibers organization; and TGF-β, IGF-1, SDF-1, and IL-10 gene expressions in the cicatricial tissue after topical treatment with a PAA:F127/GSNO hydrogel.

Photo-Cross-Linked Self-Assembled Poly(ethylene oxide)-Based Hydrogels Containing Hybrid Junctions with Dynamic and Permanent Cross-Links

Homogeneous hydrogels were formed by self-assembly of triblock copolymers via association of small hydrophobic end blocks into micelles bridged by large poly(ethylene oxide) central blocks. A fraction of the end blocks were photo-cross-linkable and could be rapidly cross-linked covalently by in situ UV irradiation. In this manner networks were formed with well-defined chain lengths between homogeneously distributed hybrid micelles that contained both permanent and dynamically cross-linked end blocks. Linear rheology showed a single relaxation mode before in situ irradiation intermediate between those of the individual networks. The presence of transient cross-links decreased the percolation threshold of the network rendered permanent by irradiation and caused a strong increase of the elastic modulus at lower polymer concentrations. Large amplitude oscillation and tensile tests showed significant increase of the fracture strain caused by the dynamic cross-links.

Tailoring the mechanical properties by molecular integration of flexible and stiff polymer networks

Designing a multiple-network structure at the molecular level to tailor the mechanical properties of polymeric materials is of great scientific and technological importance. Through the coarse-grained molecular dynamics simulation, we successfully construct an interpenetrating polymer network (IPN) composed of a flexible polymer network and a stiff polymer network. First, we find that there is an optimal chain stiffness for a single network (SN) to achieve the best stress-strain behavior. Then we turn to study the mechanical behaviors of IPNs. The result shows that the stress-strain behaviors of the IPNs appreciably exceed the sum of that of the corresponding single flexible and stiff network, which highlights the advantage of the IPN structure. By systematically varying the stiffness of the stiff polymer network of the IPNs, optimal stiffness also exists to achieve the best performance. We attribute this to a much larger contribution of the non-bonded interaction energy. Last, the effect of the component concentration ratio is probed. With the increase of the concentration of the flexible network, the stress-strain behavior of the IPNs is gradually enhanced, while an optimized concentration (around 60% molar ration) of the stiff network occurs, which could result from the dominant role of the enthalpy rather than the entropy. In general, our work is expected to provide some guidelines to better tailor the mechanical properties of the IPNs made of a flexible network and a stiff network, by manipulating the stiffness of the stiff polymer network and the component concentration ratio.

Study of locust bean gum reinforced cyst-chitosan and oxidized dextran based semi-IPN cryogel dressing for hemostatic application

Severe blood loss due to traumatic injuries remains one of the leading causes of death in emergency settings. Chitosan continues to be the candidate material for hemostatic applications due to its inherent hemostatic properties. However, available chitosan-based dressings have been reported to have an acidic odor at the wound site due to the incorporation of acid based solvents for their fabrication and deformation under compression owing to low mechanical strength limiting its usability. In the present study semi-IPN cryogel was fabricated via Schiff's base cross-linking between the polyaldehyde groups of oxidized dextran and thiolated chitosan in presence of locust bean gum (LBG) known for its hydrophilicity. Polymerization at -12 °C yielded macroporous semi-IPN cryogels with an average pore size of 124.57 ± 20.31 μm and 85.46% porosity. The hydrophobicity index of LBG reinforced semi-IPN cryogel was reduced 2.42 times whereas the swelling ratio was increased by 156.08% compare to control cryogel. The increased hydrophilicity and swelling ratio inflated the compressive modulus from 28.1 kPa to 33.85 for LBG reinforced semi-IPN cryogel. The structural stability and constant degradation medium pH were also recorded over a period of 12 weeks. The cryogels demonstrated lower adsorption affinity towards BSA. The cytotoxicity assays (direct, indirect) with 3T3-L1 fibroblast cells confirmed the cytocompatibility of the cryogels. The hemolysis assay showed <5% hemolysis confirming blood compatibility of the fabricated cryogel, while whole blood clotting and platelet adhesion assays confirmed the hemostatic potential of semi-IPN cryogel.

Nanostructure of Fully Injectable Hydrazone-Thiosuccinimide Interpenetrating Polymer Network Hydrogels Assessed by Small-Angle Neutron Scattering and dSTORM Single-Molecule Fluorescence Microscopy

Herein, we comprehensively investigate the internal morphology of fully injectable interpenetrating networks (IPNs) prepared via coextrusion of functionalized precursor polymer solutions based on thermoresponsive poly(N-isopropylacrylamide) (PNIPAM) and nonthermoresponsive poly(vinyl pyrrolidone) (PVP) by reactive mixing using kinetically orthogonal hydrazone and thiosuccinimide cross-linking mechanisms. Small-angle neutron scattering, probing both the full IPN as well as the individual constituent networks of the IPN using index-matching, suggests a partially mixed internal structure characterized by PNIPAM-rich domains entrapped in a clustered PVP-rich phase. This interpretation is supported by super-resolution fluorescence microscopy (direct stochastic optical reconstruction microscopy) measurements on the same gels on a different length scale, which show both the overall phase segregation typical of an IPN as well as moderate mixing of PNIPAM into the PVP-rich phase. Such a morphology is consistent with the kinetics of both gelation and phase separation in this in situ gelling system, in which gelation effectively traps a fraction of the PNIPAM in the PVP phase prior to full phase separation; by contrast, such interphase mixing is not observed in semi-IPN control hydrogels. This knowledge has significant potential for the design of an injectable hydrogel with internal morphologies optimized for particular biomedical applications.

Cross-Linked Hydrogel for Pharmaceutical Applications: A Review

Hydrogels are promising biomaterials because of their important qualities such as biocompatibility, biodegradability, hydrophilicity and non-toxicity. These qualities make hydrogels suitable for application in medical and pharmaceutical field. Recently, a tremendous growth of hydrogel application is seen, especially as gel and patch form, in transdermal drug delivery. This review mainly focuses on the types of hydrogels based on cross-linking and; secondly to describe the possible synthesis methods to design hydrogels for different pharmaceutical applications. The synthesis and chemistry of these hydrogels are discussed using specific pharmaceutical examples. The structure and water content in a typical hydrogel have also been discussed.

Structure and rheology of dual-associative protein hydrogels under nonlinear shear flow

Dual-associative protein di- and triblock copolymers composed of sticker-decorated midblocks and micelle-forming elastin-like polypeptide (ELP) endblocks form shear-thinning, thermoresponsively reinforceable hydrogels that are potentially useful as injectable materials for a variety of applications. Here, the combination of rheological and in situ scattering measurements under shear on these dual-associative gels is employed in order to better understand how block architecture plays a role in controlling microscopic structural rearrangement and the resulting macroscopic mechanical responses. These gels, which form a disordered sphere phase due to endblock aggregation under quiescent conditions with the midblock domains physically crosslinked by protein associations, exhibit both viscoelastic and thixotropic signatures with relative magnitudes dependent upon gel concentration and block architecture. In situ SAXS measurements during flow indicate that these thixotropic responses correspond to the development of ordered domains following start-up of shear. For both architectures, the rate of alignment increases with increasing concentration. However, the rate of domain formation when increasing the temperature from 35 to 50 °C depends on the interplay between thermoresponsive toughening of the endblocks and softening of the coiled-coil domains such that rate of rearrangement decreases in the triblock while it increases in the diblock. Following a step-down in shear flow, structural rearrangement within the samples results in a thixotropic stress response. Upon cessation of flow, gel recovery is characterized by a concentration-dependent restoration of the micellar network over time, with two timescales observed that correspond to two different length scales of network relaxation.

Mechanically Reinforced Catechol-Containing Hydrogels with Improved Tissue Gluing Performance

In situ forming hydrogels with catechol groups as tissue reactive functionalities are interesting bioinspired materials for tissue adhesion. Poly(ethylene glycol) (PEG)⁻catechol tissue glues have been intensively investigated for this purpose. Different cross-linking mechanisms (oxidative or metal complexation) and cross-linking conditions (pH, oxidant concentration, etc.) have been studied in order to optimize the curing kinetics and final cross-linking degree of the system. However, reported systems still show limited mechanical stability, as expected from a PEG network, and this fact limits their potential application to load bearing tissues. Here, we describe mechanically reinforced PEG⁻catechol adhesives showing excellent and tunable cohesive properties and adhesive performance to tissue in the presence of blood. We used collagen/PEG mixtures, eventually filled with hydroxyapatite nanoparticles. The composite hydrogels show far better mechanical performance than the individual components. It is noteworthy that the adhesion strength measured on skin covered with blood was >40 kPa, largely surpassing (>6 fold) the performance of cyanoacrylate, fibrin, and PEG⁻catechol systems. Moreover, the mechanical and interfacial properties could be easily tuned by slight changes in the composition of the glue to adapt them to the particular properties of the tissue. The reported adhesive compositions can tune and improve cohesive and adhesive properties of PEG⁻catechol-based tissue glues for load-bearing surgery applications.

A family of mechanically adaptive supramolecular graphene oxide/poly(ethylenimine) hydrogels from aqueous assembly

Composite hydrogels containing graphene oxide (GO) offer advantageous mechanical properties, but tuning these properties generally requires the synthesis of new hydrogels or if the hydrogel is thermally responsive, utilization of a chemistry determined temperature window. Here, we demonstrate a simple route to generate a family of GO-based hydrogels from aqueous solution based assembly of GO with polycationic poly(ethylenimine), PEI, without any secondary chemical crosslinking. Tuning the ratio of GO : PEI during the assembly produces a family of hydrogels that responds to mechanical compression by irreversibly altering their equilibrium water content and mechanical properties in a controllable manner. Despite the lack of chemical crosslinks, the hydrogels are stable when stored in an excess of water or NaCl solutions (up to 1 M) and exhibit a tunable swelling ratio (mass hydrogel : mass solid) between 44 and 162 based on both composition and compression history. Consequently, the storage modulus from shear rheology can be increased by more than 3 orders of magnitude from this irreversible mechanical compression of the hydrogel. This stiffening of the hydrogels in response to mechanical stimuli enables the prior compression loading of the hydrogel to be determined. We demonstrate that this strategy is generalizable to other anionic 2D materials such as clay (cloisite). This family of mechanically adaptive hydrogels enables facile fabrication and tuning of physical properties that could be advantageous for sensing, energy dissipation, and other applications.

In situ forming interpenetrating hydrogels of hyaluronic acid hybridized with iron oxide nanoparticles

Four derivatives of hyaluronic acid (HA) bearing thiol (HA-SH), hydrazide (HA-hy), 2-dithiopyridyl (HA-SSPy), and aldehyde groups (HA-al) respectively were synthesized. Thiol and 2-dithiopyridyl as well as hydrazide and aldehyde make up two chemically orthogonal pairs of chemo-selective functionalities that allow in situ formation of interpenetrating (IPN) disulfide and hydrazone networks simultaneously upon the mixing of the above derivatives at once. The formation of IPN was demonstrated by comparing it with the formulations of the same total HA concentration but lacking one of the reactive components. The hydrogel composed of all four components was characterized by a larger elastic modulus than those of the control single networks (either disulfide or hydrazone) and the three component formulations gave the softest hydrogels. Moreover, a hydrazone cross-linkage was designed to contain a 1,2-diol fragment. This allowed us to partially disassemble one type of network in the IPN leaving another one unaffected. In particular, treatment of the IPN with either sodium periodate or dithiothreitol resulted in disassembly of the hydrazone and disulfide networks respectively and thus softening of the hydrogel. Contrarily, the single network hydrogels completely dissolved under the corresponding conditions. In corroboration with this, enzymatic degradation of the IPN by hyaluronidase was also substantially slower than the degradation of the single networks. In order to further improve the mechanical properties of the elaborated injectable IPN, it has been in situ hybridized with iron oxide nanoparticles (IONPs). The mesh size of the IPN was smaller than the size of the IONPs resulting in the retention of nanoparticles in the matrix under equilibrium swelling conditions. However, these nanoparticles were released upon enzymatic degradation suggesting their use as MRI tags for non-invasive tracking of the hydrogel material in vivo. Additionally, this injectable hybridized hydrogel with encapsulated IONPs can be used in hyperthermia cancer therapy.

Injectable scaffolds: Preparation and application in dental and craniofacial regeneration

Injectable scaffolds are appealing for tissue regeneration because they offer many advantages over pre-formed scaffolds. This article provides a comprehensive review of the injectable scaffolds currently being investigated for dental and craniofacial tissue regeneration. First, we provide an overview of injectable scaffolding materials, including natural, synthetic, and composite biomaterials. Next, we discuss a variety of characteristic parameters and gelation mechanisms of the injectable scaffolds. The advanced injectable scaffolding systems developed in recent years are then illustrated. Furthermore, we summarize the applications of the injectable scaffolds for the regeneration of dental and craniofacial tissues that include pulp, dentin, periodontal ligament, temporomandibular joint, and alveolar bone. Finally, our perspectives on the injectable scaffolds for dental and craniofacial tissue regeneration are offered as signposts for the future advancement of this field.

Physicochemical Properties and the Gelation Process of Supramolecular Hydrogels: A Review

Supramolecular polysaccharide-based hydrogels have attracted considerable research interest recently due to their high structural functionality, low toxicity, and potential applications in foods, cosmetics, catalysis, drug delivery, tissue engineering and the environment. Modulation of the stability of hydrogels is of paramount importance, especially in the case of stimuli-responsive systems. This review will update the recent progress related to the rational design of supramolecular hydrogels with the objective of understanding the gelation process and improving their physical gelation properties for tailored applications. Emphasis will be given to supramolecular host⁻guest systems with reference to conventional gels in describing general aspects of gel formation. A brief account of the structural characterization of various supramolecular hydrogels is also provided in order to gain a better understanding of the design of such materials relevant to the nature of the intermolecular interactions, thermodynamic properties of the gelation process, and the critical concentration values of the precursors and the solvent components. This mini-review contributes to greater knowledge of the rational design of supramolecular hydrogels with tailored applications in diverse fields ranging from the environment to biomedicine.

Reversible bidirectional bending of hydrogel-based bilayer actuators

Semi-IPN hydrogel-based bilayers were fabricated and exhibited unique bidirectional bending behavior in response to solution temperature and pH, which is vastly different from what is observed for bilayers composed of only conventional hydrogels.

Double-networks based on pH-responsive, amphiphilic “core-first” star first polymer conetworks prepared by sequential RAFT polymerization

Double-networks based on amphiphilic polymer conetworks synthesized using RAFT polymerization were prepared, exhibiting pH-responsiveness, nanophase separation and enhanced mechanical properties.

pH-Modulating Poly(ethylene glycol)/Alginate Hydrogel Dressings for the Treatment of Chronic Wounds

The development of chronic wounds has been frequently associated with alkaline pH values. The application of pH-modulating wound dressings can, therefore, be a promising treatment option to promote normal wound healing. This study reports on the development and characterization of acidic hydrogel dressings based on interpenetrating poly(ethylene glycol) diacrylate/acrylic acid/alginate networks. The incorporation of ionizable carboxylic acid groups results in high liquid uptake up to 500%. The combination of two separate polymer networks significantly improves the tensile and compressive stability. In a 2D cell migration assay, the application of hydrogels (0% to 1.5% acrylic acid) results in complete "wound" closure; hydrogels with 0.25% acrylic acid significantly increase the cell migration velocity to 19.8 ± 1.9 µm h^-1 . The most promising formulation (hydrogels with 0.25% acrylic acid) is tested on 3D human skin constructs, increasing keratinocyte ingrowth into the wound by 164%.

Mechanical properties of PNIPAM based hydrogels: A review

Materials which adjust their properties in response to environmental factors such as temperature, pH and ionic strength are rapidly evolving and known as smart materials. Hydrogels formed by smart polymers have various applications. Among the smart polymers, thermoresponsive polymer poly(N-isopropylacrylamide)(PNIPAM) is very important because of its well defined structure and property specially its temperature response is closed to human body and can be finetuned as well. Mechanical properties are critical for the performance of stimuli responsive hydrogels in diverse applications. However, native PNIPAM hydrogels are very fragile and hardly useful for any practical purpose. Intense researches have been done in recent decade to enhance the mechanical features of PNIPAM hydrogel. In this review, several strategies including interpenetrating polymer network (IPN), double network (DN), nanocomposite (NC) and slide ring (SR) hydrogels are discussed in the context of PNIPAM hydrogel.

Co-release of dicloxacillin and thioridazine from catheter material containing an interpenetrating polymer network for inhibiting device-associated Staphylococcus aureus infection

Approximately half of all nosocomial bloodstream infections are caused by bacterial colonization of vascular catheters. Attempts have been made to improve devices using anti-adhesive or antimicrobial coatings; however, it is often difficult to bind coatings stably to catheter materials, and the low amounts of drug in thin-film coatings limit effective long-term release. Interpenetrating polymer networks (IPNs) are polymer hybrid materials with unique drug release properties. While IPNs have been extensively investigated for use in tablet- or capsule-based drug delivery systems, the potential for use of IPNs in drug release medical devices remains largely unexplored. Here, we investigated the use of silicone-hydrogel IPNs as a catheter material to provide slow anti-bacterial drug-release functionality. IPN catheters were produced by the sequential method, using supercritical CO₂ as a solvent to polymerize and crosslink poly(2-hydroxyethyl methacrylate) (PHEMA) in silicone elastomer. The design was tested against Staphylococcus aureus colonization after loading with dicloxacillin (DCX) alone or in combination with thioridazine (TDZ), the latter of which is known to synergistically potentiate the antibacterial effect of DCX against both methicillin-sensitive and methicillin-resistant S. aureus. The hydrophilic PHEMA component allowed for drug loading in the catheters by passive diffusion and provided controlled release properties. The drug-loaded IPN material inhibited bacterial growth on agar plates for up to two weeks and in blood cultures for up to five days, and it withstood 24h of seeding with resilient biofilm aggregates. The combined loading of DCX+TDZ enhanced the antibacterial efficiency in static in vitro experiments, although release analyses revealed that this effect was due to an enhanced loading capacity of DCX when co-loaded with TDZ. Lastly, the IPN catheters were tested in a novel porcine model of central venous catheter-related infection, in which drug-loaded IPN catheters were found to significantly decrease the frequency of infection.

Formulation and Coating of Alginate and Alginate-Hydroxypropylcellulose Pellets Containing Ranolazine

The formulation and the coating composition of biopolymeric pellets containing ranolazine were studied to improve their technological and biopharmaceutical properties. Eudragit L100 (EU L100) and Eudragit L30 D-55-coated alginate and alginate-hydroxypropylcellulose (HPC) pellets were prepared by ionotropic gelation using 3 concentrations of HPC (0.50%, 0.65%, and 1.00% wt/wt) and applying different percentages (5%, 10%, 20%, and 30% wt/wt) of coating material. The uncoated pellets were regular in shape and had mean diameter between 1490 and 1570 μm. The rate and the entity of the swelling process were affected by the polymeric composition: increasing the HPC concentration, the structure of the pellets became more compact and slowed down the penetration of fluids. Coated alginate-HPC formulations were able to control the drug release at neutral pH: a higher quantity of HPC in the system determined a slower release of the drug. The nature of the coating polymer and the coating level applied affected the drug release in acidic environment: EU L100 gave better performance than Eudragit L30 D-55 and the best coating level was 20%. The pellets containing 0.65% of HPC and coated with 20% EU L100 represented the best formulation, able to limit the drug release in acidic environment and to control it at pH 6.8.

Hydrodynamic description of elastic or viscoelastic composite materials: Relative strains as macroscopic variables

One possibility to adjust material properties to a specific need is to embed units of one substance into a matrix of another substance. Even materials that are readily tunable during operation can be generated in this way. In (visco)elastic substances, both the matrix material as well as the inclusions and/or their immediate environment can be dynamically deformed. If the typical dynamic response time of the inclusions and their surroundings approach the macroscopic response time, their deformation processes need to be included into a dynamic macroscopic characterization. Along these lines, we present a hydrodynamic description of (visco)elastic composite materials. For this purpose, additional strain variables reflect the state of the inclusions and their immediate environment. These additional strain variables in general are not set by a coarse-grained macroscopic displacement field. Apart from that, during our derivation, we also include the macroscopic variables of relative translations and relative rotations that were previously introduced in different contexts. As a central point, our approach reveals and classifies the importance of a macroscopic variable termed relative strains. We analyze two simplified minimal example geometries as an illustration.

Hydrogels as a Replacement Material for Damaged Articular Hyaline Cartilage

Hyaline cartilage is a strong durable material that lubricates joint movement. Due to its avascular structure, cartilage has a poor self-healing ability, thus, a challenge in joint recovery. When severely damaged, cartilage may need to be replaced. However, currently we are unable to replicate the hyaline cartilage, and as such, alternative materials with considerably different properties are used. This results in undesirable side effects, including inadequate lubrication, wear debris, wear of the opposing articular cartilage, and weakening of the surrounding tissue. With the number of surgeries for cartilage repair increasing, a need for materials that can better mimic cartilage, and support the surrounding material in its typical function, is becoming evident. Here, we present a brief overview of the structure and properties of the hyaline cartilage and the current methods for cartilage repair. We then highlight some of the alternative materials under development as potential methods of repair; this is followed by an overview of the development of tough hydrogels. In particular, double network (DN) hydrogels are a promising replacement material, with continually improving physical properties. These hydrogels are coming closer to replicating the strength and toughness of the hyaline cartilage, while offering excellent lubrication. We conclude by highlighting several different methods of integrating replacement materials with the native joint to ensure stability and optimal behaviour.

Preparation of Uniform-Sized and Dual Stimuli-Responsive Microspheres of Poly(N-Isopropylacrylamide)/Poly(Acrylic acid) with Semi-IPN Structure by One-Step Method

A novel strategy was developed to synthesize uniform semi-interpenetrating polymer network (semi-IPN) microspheres by premix membrane emulsification combined with one-step polymerization. Synthesized poly(acrylic acid) (PAAc) polymer chains were added prior to the inner water phase, which contained N-isopropylacrylamide (NIPAM) monomer, N,N′-methylene bisacrylamide (MBA) cross-linker, and ammonium persulfate (APS) initiator. The mixtures were pressed through a microporous membrane to form a uniform water-in-oil emulsion. By crosslinking the NIPAM in a PAAc-containing solution, microspheres with temperature- and pH-responsive properties were fabricated. The semi-IPN structure and morphology of the microspheres were confirmed by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The average diameter of the obtained microspheres was approximately 6.5 μm, with Span values of less than 1. Stimuli-responsive behaviors of the microspheres were studied by the cloud-point method. The results demonstrated that semi-IPN microspheres could respond independently to both pH and temperature changes. After storing in a PBS solution (pH 7.0) at 4 °C for 6 months, the semi-IPN microspheres remained stable without a change in morphology or particle size. This study demonstrated a promising method for controlling the synthesis of semi-IPN structure microspheres with a uniform size and multiple functionalities.

Multifunctional Hydrogel Microparticles by Polymer-Assisted Photolithography

Although standard lithography has been the most common technique in micropatterning, ironically it has not been adopted to produce multifunctional hydrogel microparticles, which are highly useful for bioassays. We address this issue by developing a negative photoresist-like polymer system, which is basically comprised of polyethylene glycol (PEG) triacrylate as cross-linking units and long-chain polyvinylpyrrolidone (PVP) as the supporting scaffold. We leverage standard lithography to manufacture multilayer microparticles that are intrinsically hydrophilic, low-autofluorescent, and chemically reactive. The versatility of the microparticles is demonstrated to be color-encoded, pore-controllable, bioactive, and potentially used as a DNA bioassay.

Toughening of Thermoresponsive Arrested Networks of Elastin-Like Polypeptides To Engineer Cytocompatible Tissue Scaffolds

Formulation of tissue engineering or regenerative scaffolds from simple bioactive polymers with tunable structure and mechanics is crucial for the regeneration of complex tissues, and hydrogels from recombinant proteins, such as elastin-like polypeptides (ELPs), are promising platforms to support these applications. The arrested phase separation of ELPs has been shown to yield remarkably stiff, biocontinuous, nanostructured networks, but these gels are limited in applications by their relatively brittle nature. Here, a gel-forming ELP is chain-extended by telechelic oxidative coupling, forming extensible, tough hydrogels. Small angle scattering indicates that the chain-extended polypeptides form a fractal network of nanoscale aggregates over a broad concentration range, accessing moduli ranging from 5 kPa to over 1 MPa over a concentration range of 5-30 wt %. These networks exhibited excellent erosion resistance and allowed for the diffusion and release of encapsulated particles consistent with a bicontinuous, porous structure with a broad distribution of pore sizes. Biofunctionalized, toughened networks were found to maintain the viability of human mesenchymal stem cells (hMSCs) in 2D, demonstrating signs of osteogenesis even in cell media without osteogenic molecules. Furthermore, chondrocytes could be readily mixed into these gels via thermoresponsive assembly and remained viable in extended culture. These studies demonstrate the ability to engineer ELP-based arrested physical networks on the molecular level to form reinforced, cytocompatible hydrogel matrices, supporting the promise of these new materials as candidates for the engineering and regeneration of stiff tissues.

Highly stretchable and tough pH-sensitive hydrogels with reversible swelling and recoverable deformation

Stimuli-responsive hydrogels are becoming increasingly important for controlled drug delivery, biosensing, and tissue engineering. It would be much advantageous for intelligent hydrogels if they exhibit superior mechanical performances.