Dilute solution properties of cellulose in LiOH/urea aqueous system

Rheological behaviors in the regimes from dilute to concentrated in cellulose solutions dissolved at low temperature

Cellulose was dissolved rapidly in 9.5 wt.-% NaOH/4.5 wt.-% thiourea aqueous solution pre-cooled to -5 degrees C to prepare cellulose solution with different concentrations. The rheological properties of the cellulose solutions in wide concentration regimes from dilute (0.008 wt.-%) to concentrated (4.0 wt.-%) at 25 degrees C were investigated. On the basis of data from the steady-shear flow test, the critical overlap (c*), the entanglement (c(e)) and the gel (c(g)) concentrations of the cellulose solution at 25 degrees C were determined, respectively, to be 0.10 wt.-%, 0.53 wt.-% and 2.50 wt.-%, in accordance with the results of storage modulus (G') versus c by dynamic test. Moreover, the Cox-Merz deviation at relatively low concentrations was in good agreement with the micro-gel particles in dilute regime. As the cellulose concentration increased, a homogeneous 3-dimensional network formed in the cellulose solution in the concentrated regime, and further increasing of the concentration led to micro-phase separation as determined by the time-temperature superposition (tTS). So far, this complex cellulose solution has been successfully described by the concentration regime theory for the first time, and the relatively molecular morphologies in each regime have been determined, providing useful information for the applications of the cellulose solution systems.

Cellulose aerogels from aqueous alkali hydroxide-urea solution

Highly porous and strong cellulose aerogels were prepared by gelation of cellulose from aqueous alkali hydroxide/urea solution, followed by drying with supercritical CO2. Their morphology, pore structure, and physical properties were characterized by scanning and transmission electron microscopy, X-ray diffraction, nitrogen adsorption measurements, UV/Vis spectrometry, and tensile tests. The cellulose hydrogel was composed of interconnected about 20 nm wide. By using supercritical CO2 drying, the network structure in the hydrogel was well preserved in the aerogel. The results are preliminary but demonstrate the ability of this method to give cellulose aerogels of large surface areas (400-500 m2 g(-1)) which may be useful as adsorbents, heat/sound insulators, filters, catalyst supports, or carbon aerogel precursors.

High-strength cellulose/poly(ethylene glycol) gels

Cellulose gel membranes have been prepared by a pre-gelation method employing cellulose solutions in aqueous NaOH-thiourea obtained at low temperature. The cellulose gels were then swollen by low-molecular-weight polyethylene glycol (PEG; MW<1000 g mol(-1)), and the morphology, structure and mechanical properties of the cellulose/PEG gels were studied by various techniques. The gels exhibit high mechanical performance, and the tensile strength of the gel membranes increases sharply with an increase in the molecular weight of PEG from 200 to 800 g mol(-1). Moreover, their elongation at break remains stable at 100 %. PEG800 efficiently improves the optical transmittance of the gel membranes at ambient temperature, which is about five times greater than that of a normal cellulose hydrogel membrane. A strong hydrogen-bonding interaction occurs between PEG and cellulose leading to a homogeneous structure, high mechanical strength and good transparency of the gel membranes.

Hydrogen-bond-induced inclusion complex in aqueous cellulose/LiOH/urea solution at low temperature

It was puzzling that cellulose could be dissolved rapidly in 4.6 wt % LiOH/15 wt % urea aqueous solution precooled to -12 degrees C, whereas it could not be dissolved in the same solvent without prior cooling. To clarify this important phenomenon, the structure and physical properties of LiOH and urea in water as well as of cellulose in the aqueous LiOH/urea solution at different temperatures were investigated by means of laser light scattering, 13C NMR spectroscopy, differential scanning calorimetry, Fourier transform infrared spectroscopy, wide-angle X-ray diffraction, and transmission electron microscopy (TEM). The results reveal that a hydrogen-bonded network structure between LiOH, urea, and water can occur, and that it becomes more stable with decreasing temperature. The LiOH hydrates cleave the chain packing of cellulose through the formation of new hydrogen bonds at low temperatures, which result in a relatively stable complex associated with LiOH, water clusters, and cellulose. A channel inclusion complex (IC) hosted by urea could encage the cellulose macromolecule in LiOH/urea solution with prior cooling and therefore provide a rationale for forming a good dispersion of cellulose. TEM observations, for the first time, showed the channel IC in dry form. The low-temperature step played an important role in shifting hydrogen bonds between cellulose and small molecules, leading to the dissolution of macromolecules in the aqueous solution.