Contact guidance in vitro. A light, transmission, and scanning electron microscopic study

Spreading of epithelial cells on machined and sandblasted titanium surfaces: an in vitro study

BACKGROUND

The purpose of this investigation was to determine the influence of the surface structure of dental implants on epithelial cell spreading and growth in vitro. Cell morphology on machined and sandblasted titanium surfaces was investigated.

METHODS

A total of 10 machined and 10 sandblasted discs and 10 glass coverslips were used for the present study. Samples were analyzed using scanning electron microscopy (SEM) and the cell spreading area was determined using a video image analysis system.

RESULTS

After 24 hours incubation, keratinocytes grown on sandblasted titanium samples displayed numerous, long, and branched or dendritic filopodia closely adapted to the surface roughness. Filopodia varied from 3 to 12 microm in length and 0.1 to 0.3 microm in width. Cells cultured on a machined surface did not present such cytoplasmic extensions and displayed a round morphology. Keratinocytes seeded on glass coverslips were flat and edged by filopodia (maximum length 7 to 8 microm) on the spreading site of the cluster. Though cell morphology is comparable with that observed on sandblasted specimens, cytoplasmic extensions suggestive of strong adhesion and spreading attitude were less pronounced.

CONCLUSION

These results indicate that sandblasted surfaces are the optimal substrata for epithelial cell adhesion and spreading.

Interactions between MC3T3-E1 cells and textured Ti6Al4V surfaces

This paper presents the results of an experimental study of the interactions between MC3T3-E1 (mouse calvarian) cells and textured Ti6Al4V surfaces, including surfaces produced by laser microgrooving; blasting with alumina particles; and polishing. The multiscale interactions between MC3T3-E1 cells and these textured surfaces are studied using a combination of optical scanning transmission electron microscopy and atomic force microscopy. The potential cytotoxic effects of microchemistry on cell-surface interactions also are considered in studies of cell spreading and orientation over 9-day periods. These studies show that cells on microgrooved Ti6Al4V geometries that are 8 or 12 microm deep undergo contact guidance and limited cell spreading. Similar contact guidance is observed on the surfaces of diamond-polished surfaces on which nanoscale grooves are formed due to the scratching that occurs during polishing. In contrast, random cell orientations are observed on alumina-blasted Ti6Al4V surfaces. The possible effects of surface topography are discussed for scar-tissue formation and improved cell-surface integration.

Topographical and physicochemical modification of material surface to enable patterning of living cells

Precise control of the architecture of multiple cells in culture and in vivo via precise engineering of the material surface properties is described as cell patterning. Substrate patterning by control of the surface physicochemical and topographic features enables selective localization and phenotypic and genotypic control of living cells. In culture, control over spatial and temporal dynamics of cells and heterotypic interactions draws inspiration from in vivo embryogenesis and haptotaxis. Patterned arrays of single or multiple cell types in culture serve as model systems for exploration of cell-cell and cell-matrix interactions. More recently, the patterned arrays and assemblies of tissues have found practical applications in the fields of Biosensors and cell-based assays for Drug Discovery. Although the field of cell patterning has its origins early in this century, an improved understanding of cell-substrate interactions and the use of microfabrication techniques borrowed from the microelectronics industry have enabled significant recent progress. This review presents the important early discoveries and emphasizes results of recent state-of-the-art cell patterning methods. The review concludes by illustrating the growing impact of cell patterning in the areas of bioelectronic devices and cell-based assays for drug discovery.

Platelet interactions with titanium: modulation of platelet activity by surface topography

Endosseous implants initially come into contact with blood. Thus, the nature of the interactions between blood and implanted endosseous implants may influence subsequent bone healing events in the peri-implant healing compartment. We conducted studies to address the following question: Does implant surface microtexture modulate platelet activity? We used commercially pure Ti (cpTi) disks with four different surface finishes: dual acid-etched (DAE), 320 grit (320G) abraded, machined, and p1200 polished cpTi. Surfaces were characterized by scanning electron microscopy (SEM) and optical profilometry. The DAE and 320G surfaces presented more complex microtextures than the machined or polished surfaces. Platelet activities were measured by quantifying platelet adherence, platelet-derived microparticle (MP) formation, and P-selectin expression as function of surface type. Platelet adhesion, measured using a lactate dehydrogenase (LDH) assay. was increased on DAE and 320G surfaces compared to machined and polished surfaces (p < 0.05). M P formation and P-selectin expression, assayed by flow cytometry, also showed increased activation of platelets on DAE and 320G surfaces. Because increased activation of platelets may lead to up-regulation of osteogenic responses during bone healing, these results may explain the enhanced osteoconductivity known to occur with DAE cpTi surfaces in comparison with machined cpTi surfaces.

Modulation of epithelial tissue and cell migration by microgrooves

We used a polystyrene substratum to study the response of migrating epithelium to 1- or 5-microm depth microgrooves with groove/ridge widths of 1, 2, 5, or 10 microm. The migration of a tissue sheet was enhanced along the microgrooves, while migration across the microgrooves was inhibited. Changing the depth of the microgrooves had a greater effect on migration than alteration of the groove/ridge width. The migration of epithelial cells from a confluent monolayer culture followed a similar pattern to that of intact epithelial tissue. Cellular extensions generally followed the microgroove direction by tracking along the top of the ridges or following the ridge walls, as revealed by scanning electron microscopy. Actin filaments within the basal cell layer of the tissue were aligned with the microgrooves, unlike filaments in the superficial layers that did not appear to be affected by the presence of underlying microgrooves. The basal cell layer of the tissue conformed to the contours of the microgroove following migration. However, the ultrastructure of the tissue above the ridges resembled that of tissue on a flat surface. We concluded that surface microgrooves have the potential to direct the migration of immediately adjacent epithelial tissue, the effect of which is to guide epithelial tissue on the surface of implanted biomaterials.

Attachment of astroglial cells to microfabricated pillar arrays of different geometries

We studied the attachment of astroglial cells on smooth silicon and arrays of silicon pillars and wells with various widths and separations. Standard semiconductor industry photolithographic techniques were used to fabricate pillar arrays and wells in single-crystal silicon. The resulting pillars varied in width from 0. 5 to 2.0 micrometer, had interpillar gaps of 1.0-5.0 micrometer, and were 1.0 micrometer in height. Arrays also contained 1.0-micromter-deep wells that were 0.5 micrometer in diameter and separated by 0.5-2.0 micrometer. Fluorescence, reflectance, and confocal light microscopies as well as scanning electron microscopy were used to quantify cell attachment, describe cell morphologies, and study the distribution of cytoskeletal proteins actin and vinculin on surfaces with pillars, wells, and smooth silicon. Seventy percent of LRM55 astroglial cells displayed a preference for pillars over smooth silicon, whereas only 40% preferred the wells to the smooth surfaces. Analysis of variance statistics performed on the data sets yielded values of p > approximately.5 for the comparison between pillar data sets and < approximately.0003 in the comparison between pillar and well data sets. Actin and vinculin distributions were highly polarized in cells found on pillar arrays. Scanning electron microscopy clearly demonstrated that cells made contact with the tops of the pillars and did not reach down into the spaces between pillars even when the interpillar gap was 5.0 microm. These experiments support the use of surface topography to direct the attachment, growth, and morphology of cells. These surfaces can be used to study fundamental cell properties such as cell attachment, proliferation, and gene expression. Such topography might also be used to modify implantable medical devices such as neural implants and lead to future developments in tissue engineering.

The strain magnitude and contact guidance determine orientation response of fibroblasts to cyclic substrate strains

When grown in a substrate subjected to cyclic stretching, most types of cells change orientations. This cell orientation response (COR) has been shown to be driven by axial substrate strain (the strain beneath and along a cell's long axis). However, it remains unclear whether COR depends on the strain direction (tension vs compression). Furthermore, in vitro COR is paradoxical, since in vivo fibroblasts align along collagen fibers and hence the stretch direction. We hypothesized that COR does not depend on the surface strain direction, and that contact guidance provided by microgrooves can maintain cell alignment in the presence of cyclic stretching. Human skin fibroblasts were cultured on compliant smooth and microgrooved surfaces in silicone dishes. Cyclic uniaxial tensile and compressive strains (4%, 8% and 12%) were applied on the dishes at 1 Hz for 24 h. Cell orientation distributions were determined and compared using the Kolmogorov-Smirnov test. Significant differences were found between each of cell orientation distributions with the applied strains and that without strains (p < 0.05). Nevertheless, no significant differences were found between two cell orientation distributions for each pair of opposite strains applied (for 4%, p = 0.33; for 8%, p = 0.18; and for 12%, p = 0.32). Moreover, fibroblasts grown in microgrooves aligned in the groove direction and remained so after 8% cyclic stretch. Thus, this study showed that COR is the cells' avoidance to substrate deformation (i.e., strain-direction independent). It also suggested that the failure of fibroblasts to change orientations in vivo may result from the contact guidance provided by collagen fibers.

Adhesion, alignment, and migration of cultured Schwann cells on ultrathin fibronectin fibres

Individual fibres of fibronectin (Fn-fibres), an extracellular matrix cell adhesion glycoprotein, were produced from a purified solution of fibronectin. These fibres range from 0.5-7 microm in width and have been engineered to produce mats (Fn-mats) by using a unidirectional shear force to orientate the fibres. Fn-fibres have been shown to promote alignment by contact guidance of human dermal fibroblasts, neurites, macrophages, and epitenon fibroblasts. Fn-mats have been used to orientate and enhance the regeneration of peripheral nerve components. We investigated cell spreading, orientation, formation of focal contacts, and the speed of cell movement on individual Fn-fibres, glass-covered with poly-L-lysine and poly-L-lysine/laminin/Fn. Fibronectin fibres significantly promoted cell spreading and the speed of cell migration with alignment of focal contacts and F-actin filaments to the axis of the fibres. The study reveals the potential of Fn-fibres to guide and direct cellular behaviour by contact guidance. The increase in migration and other behaviour exhibited by Schwann cells on Fn-fibres justifies the use of Fn-mats for peripheral nerve repair and is clinically important in that atrophy of the target organ, which is the most common failure of nerve repair, may be minimised.

Alignment and proliferation of MC3T3-E1 osteoblasts in microgrooved silicone substrata subjected to cyclic stretching

Previous studies have shown that many types of cells align in microgrooves in static cultures. However, whether cells remain aligned and also proliferate in microgrooves under stretching conditions has not been determined. We grew MC3T3-E1 osteoblasts in deformable silicone dishes containing microgrooves oriented in the stretch direction. We found that with or without 4% stretching, cells aligned in microgrooves of all sizes, with the groove and ridge widths ranged from 1 to 6microm, but the same groove depth of about 1.6microm. In addition, actin cytoskeleton and nuclei became highly aligned in the microgrooves with and without 4% cyclic stretching. To further examine whether MC3T3-E1 osteoblasts proliferate in microgrooves with cyclic stretching, we grew the cells in six-well silicone dishes containing microgrooves in three wells and smooth surfaces in other three wells. After 4% cyclic stretching for 3, 4, and 7 days, we found that cell numbers in the microgrooves were not significantly different (p>0.05) from those on the smooth surface (p>0.05). Taken together, these results show that MC3T3-E1 osteoblasts can align and proliferate in microgrooves with 4% cyclic stretching. We suggest that the silicone microgrooves can be a useful tool to study the phenotype of MC3T3-E1 osteoblasts under controlled substrate strains. The silicone microgrooves can also be useful for delivering defined substrate strains to other adherent cells in cultures.

Contact guidance of rat fibroblasts on various implant materials

Providing a substrate surface with micrometer-sized parallel grooves influences the behavior of cells growing on such substrates in vitro. Cells elongate in the direction of the groove and migrate guided by the grooves. It has been suggested that cellular alignment on microgrooves is predominantly dependent on groove dimensions and that surface chemical variation of the substrate material has little effect. Therefore we seeded primary rat dermal fibroblasts (RDF) on smooth and microgrooved (groove width 1-10 microm, depth 0.5 microm) polystyrene (PS), poly-L-lactic acid (PLA), silicone (SIL), and titanium (Ti) substrates. The production process was found to be more accurate for PS and PLA than for SIL and Ti substrates. A proliferation study, scanning electron microscopy, confocal laser scanning microscopy, and transmission electron microscopy revealed differences between RDF behavior on the materials. Our conclusions are (1) the accuracy of microtexture production by casting depends greatly on the material used; (2) even if no sharp discontinuities are present, microtextures still are potent tools for inducing contact guidance; and (3) besides surface texture, surface chemistry has a definitive influence on cell morphology.

Contact guidance of rat fibroblasts on various implant materials

Providing a substrate surface with micrometer-sized parallel grooves influences the behavior of cells growing on such substrates in vitro. Cells elongate in the direction of the groove and migrate guided by the grooves. It has been suggested that cellular alignment on microgrooves is predominantly dependent on groove dimensions and that surface chemical variation of the substrate material has little effect. Therefore we seeded primary rat dermal fibroblasts (RDF) on smooth and microgrooved (groove width 1-10 microm, depth 0.5 microm) polystyrene (PS), poly-L-lactic acid (PLA), silicone (SIL), and titanium (Ti) substrates. The production process was found to be more accurate for PS and PLA than for SIL and Ti substrates. A proliferation study, scanning electron microscopy, confocal laser scanning microscopy, and transmission electron microscopy revealed differences between RDF behavior on the materials. Our conclusions are (1) the accuracy of microtexture production by casting depends greatly on the material used; (2) even if no sharp discontinuities are present, microtextures still are potent tools for inducing contact guidance; and (3) besides surface texture, surface chemistry has a definitive influence on cell morphology.

Soft tissue and epithelial models

The applicability of a biomaterial for the manufacturing of oral implants is determined by its physicochemical and geometric surface properties. Research, therefore, is concerned with the cellular reactions that occur when an implant material comes into contact with body tissues. For permucosal oral implants, this involves both the reaction of bone and gingival cells. In vitro cell culturing--including the use of various analytical techniques like light microscopy, scanning and transmission electron microscopy, confocal laser scanning microscopy, and digital image analysis--is a good tool whereby investigators can obtain more insight into the relevant components of implant-tissue adhesion. In the current overview, the role of cell models in oral implant research is discussed, specifically with reference to responses of epithelial cells and fibroblasts.

The effects of the surface topography of micromachined titanium substrata on cell behavior in vitro and in vivo

Surface properties, including topography and chemistry, are of prime importance in establishing the response of tissues to biomaterials. Microfabrication techniques have enabled the production of precisely controlled surface topographies that have been used as substrata for cells in culture and on devices implanted in vivo. This article reviews aspects of cell behavior involved in tissue response to implants with an emphasis on the effects of topography. Microfabricated grooved surfaces produce orientation and directed locomotion of epithelial cells in vitro and can inhibit epithelial downgrowth on implants. The effects depend on the groove dimensions and they are modified by epithelial cell-cell interactions. Fibroblasts similarly exhibit contact guidance on grooved surfaces, but fibroblast shape in vitro differs markedly from that found in vivo. Surface topography is important in establishing tissue organization adjacent to implants, with smooth surfaces generally being associated with fibrous tissue encapsulation. Grooved topographies appear to have promise in reducing encapsulation in the short term, but additional studies employing three-dimensional reconstruction and diverse topographies are needed to understand better the process of connective-tissue organization adjacent to implants. Microfabricated surfaces can increase the frequency of mineralized bone-like tissue nodules adjacent to subcutaneously implanted surfaces in rats. Orientation of these nodules with grooves occurs both in culture and on implants. Detailed comparisons of cell behavior on micromachined substrata in vitro and in vivo are difficult because of the number and complexity of factors, such as population density and micromotion, that can differ between these conditions.

Electrical, chemical, and topological addressing of mammalian cells with microfabricated systems

This communication describes our work in electrical, topological, and chemical micromodification of surfaces to modulate cellular form and function. We have addressed the surface physico-chemico-mechano properties of cell culture substrates that play a role in modulating cellular behavior. Single factorial model systems have been built using techniques adapted from microlithography. The tools and techniques of microfabrication, if harnessed and used correctly, can be enabling in elucidating the underlying principles and fundamental forces driving the cell-substrate interface. Additionally, the long-term practical applications of microfabrication in medicine and biomaterial/tissue engineering lie in enabling "communication" with living cells/tissues at the cellular and subcellular levels.

Reactions of cells to topography

Though contact guidance has been known since the very early days of cell culture very little quantitative examination of the reaction of cells to topography has been made. Exceptions to this subjective approach are given prominence below. Yet if we are to understand how cells react and if we are to be able to design ideal substrata for particular cells we need this information. Precision and quantitation are required both of the methods of examination of the cells but also in the definition of that topography. Recently it has become clear that the these reactions occur at the nanometric scale and have importance for use in cellular engineering and tissue repair. Topography appears to provide a set of very powerful signals for cells.

Surface topography and serum concentration affect the appearance of tenascin in human gingival fibroblasts in vitro

Tenascin is an extracellular matrix glycoprotein which affects cell behavior such as cell migration. This study was undertaken to investigate the time of appearance of tenascin (TN) in human gingival fibroblasts (HGF) and how it was affected by the surface topography of the titanium substratum or by serum concentration in the medium. HGF were cultured for 4 to 24 h and then processed for confocal immunofluorescence microscopy. Very few cells stained positive for TN 4 h after plating, but the number of TN-positive HGF gradually increased between 8 and 18 h after plating. The increase in the rate of the proportion of TN-positive cells on the grooved surface lagged behind that of HGF cultured on the smooth surface. The number of TN-positive cells in medium + 15% serum was significantly greater than that of cells in 5% serum or serum-free medium. The number of TN-positive cells was greater on the smooth titanium surface than on the grooved titanium surface in both 15% serum and 5% serum-containing medium. These findings suggest that TN production by fibroblasts in vitro can be modulated by factors in serum and by the surface topography of the substratum.

Collagen organization in the branching region of human brain arteries

BACKGROUND AND PURPOSE

Unruptured saccular aneurysms are relatively common, occurring in 4% to 9% of autopsies. Their development at the apex region of brain artery bifurcations is attributed to a combination of structural factors and the effect of blood pressure. Collagen is a primary tension-bearing fabric of the vessel wall, and our purpose was to examine its 3-dimensional alignment at arterial branches.

METHODS

Sixteen segments of arteries from the circle of Willis, including bifurcations, were pressure distended, fixed, and sectioned in 1 of 3 orthogonal planes. We measured the 3-dimensional organization of collagen at the flow divider by using the polarized light microscope. An electron microscopy study performed in tandem provided measurements on the collagen fibril diameters and packing density.

RESULTS

Orientation data of the collagen fabric were obtained from sections from 3 different cutting planes. The tunica media of all bifurcations had an alignment that was primarily circumferential, and the medial gap (medial defect) was distinguishable at the apex of all bifurcations. The subendothelial layer was thin at the apex but thicker and more disorganized distally. Adventitial collagen showed little organization except for a high degree of alignment along the apex. Results from the electron microscopy study showed densely packed collagen fibrils of uniform diameter at the apex, compared with slightly smaller and less densely packed fibrils nearby.

CONCLUSIONS

In the region of the medial gap, a narrow band of highly aligned tendonlike collagen running in the direction of the ridge of the flow divider was a consistent finding. This structure would provide strength and stability to the vessel and is inconsistent with the concept of an inherent defect in the structure of bifurcations.

Scanning electron microscopic, transmission electron microscopic, and confocal laser scanning microscopic observation of fibroblasts cultured on microgrooved surfaces of bulk titanium substrata

During this study, microtechnology and plasma etching were used to produce gratings 1.0 (TiD01), 2.0 (TiD02), 5.0 (TiD05), and 10.0 microns wide (TiD10) into commercially pure titanium wafers. After incubation of rat dermal fibroblast (RDFs) on these surfaces for 3 days, the cells were observed with scanning electron (SEM), transmission electron (TEM), and confocal laser scanning microscopy (CLSM). Results showed that the RDFs as a whole and their stress fibers oriented strictly parallel to the surface pattern on the TiD01 and TiD02 surfaces. On the TiD05 and TiD10 surfaces, this orientation was not observed. In addition, TEM and CLSM demonstrated that the focal adhesion points (FAP) were located mainly on the surface pattern ridges. TEM revealed that FAP were wrapped occasionally around the edges of the ridges. Only the RDFs on both the TiD05 and TiD10 surfaces protruded into the grooves and possessed FAP on the walls of the grooves. Attachment to the groove floor was observed only on the TiD10 textures. Comparison of these results with earlier observations on microtextured silicone rubber substrata suggests that material-specific properties do not influence the orientational effect of the surface texture on the observed RDF cellular behavior. The proliferation rate of the RDFs, however, seems to be much higher on titanium than on silicone rubber substrata.

Orientation of ECM protein deposition, fibroblast cytoskeleton, and attachment complex components on silicone microgrooved surfaces

The microfilaments and vinculin-containing attachment complexes of rat dermal fibroblasts (RDF) incubated on microtextured surfaces were investigated with confocal laser scanning microscopy (CLSM) and digital image analysis (DIA). In addition, depositions of bovine and endogenous fibronectin and vitronectin were studied. Smooth and microtextured silicone substrata were produced that possessed parallel surface grooves with a groove and ridge width of 2.0, 5.0, and 10.0 microns. The groove depth was approximately 0.5 micron. CLSM and DIA make it possible to visualize and analyze intracellular and extracellular proteins and the underlying surface simultaneously. It was observed that the microfilaments and vinculin aggregates of the RDFs on the 2.0 microns grooved substrata were oriented along the surface grooves after 1, 3, 5, and 7 days of incubation while these proteins were significantly less oriented on the 5.0 and 10.0 microns grooved surfaces. Vinculin was located mainly on the surface ridges on all textured surfaces. In contrast, bovine and endogenous fibronectin and vitronectin were oriented along the surface grooves on all textured surfaces. These proteins did not seem to be hindered by the surface grooves since many groove-spanning filaments were found on all the microgrooved surfaces. In conclusion, it can be said that microtextured surfaces influence the orientation of intracellular and extracellular proteins. Although results corroborate three earlier published hypotheses, they do not justify a specific choice of any one of these hypotheses.

Cell activation by the micropatterned surface with settling particles

Surface topography plays an important role in cell orientation and morphogenesis. In this study, we prepared a micropatterned surface with settling particles to obtain more detailed information about the cell recognition against the microstructured surface. Core-shell type particles having a poly-(N-isopropylacrylamide) (polyNIPAM) shell were prepared by seeded polymerization. Particles were settled on a polystyrene (PSt) flat dish by the spinner to prepare a micropatterned surface with settling particles. It could be seen that the polyNIPAM shell shrunk above and swelled below the LCST. For comparison, a thermosensitive flat surface was prepared by the graft polymerization of NIPAM. No morphologic change of cells contacting the both surfaces was observed with either an optical or a scanning electron microscope. Moreover, particles could move or roll on these surfaces when shaking the dishes. The weak interaction between neutrophil-like cells and the micropatterned surface with settling particles or the polyNIPAM-grafted surface was estimated by measurement of active oxygen released by cells. A little release could be observed at both 25 and 35 degrees C. The amount of released active oxygen at 35 degrees C was slightly larger than at 25 degrees C. When the temperature was suddenly changed, the dynamic changes of particle shape and size resulted in the excess release of active oxygen from cells contacting the micropatterned surface with settling particles. Meanwhile no stimulation could be observed in the polyNIPAM-grafted surface even if the temperature is suddenly changed. These results indicate that the micropatterned surface with settling particles can induce the dynamic stimulus at a patterned input mode.

Sensitivity of fibroblasts and their cytoskeletons to substratum topographies: topographic guidance and topographic compensation by micromachined grooves of different dimensions

Fibroblasts alter their shape, orientation, and direction of movement to align with the direction of micromachined grooves, exhibiting a phenomenon termed topographic guidance. In this study we examined the ability of the microtubule and actin microfilament bundle systems, either in combination with or independently from each other, to affect alignment of human gingival fibroblasts on sets of micromachined grooves of different dimensions. To assess specifically the role of microtubules and actin microfilament bundles, we examined cell alignment, over time, in the presence or absence of specific inhibitors of microtubules (colcemid) and actin microfilament bundles (cytochalasin B). Using time-lapse videomicroscopy, computer-assisted morphometry and confocal microscopy of the cytoskeleton we found that the dimensions of the grooves influenced the kinetics of cell alignment irrespective of whether cytoskeletons were intact or disturbed. Either an intact microtubule or an intact actin microfilament-bundle system could produce cell alignment with an appropriate substratum. Cells with intact microtubules aligned to smaller topographic features than cells deficient in microtubules. Moreover, cells deficient in microtubules required significantly more time to become aligned. An unexpected finding was that very narrow 0.5-microm-wide and 0.5-microm-deep grooves aligned cells deficient in actin microfilament bundles (cytochalasin B-treated) better than untreated control cells but failed to align cells deficient in microtubules yet containing microfilament bundles (colcemid treated). Thus, the microtubule system appeared to be the principal but not sole cytoskeletal substratum-response mechanism affecting topographic guidance of human gingival fibroblasts. This study also demonstrated that micromachined substrata can be useful in dissecting the role of microtubules and actin microfilament bundles in cell behaviors such as contact guidance and cell migration without the use of drugs such as cytochalasin and colcemid.

Adhesion, orientation, and movement of cells cultured on ultrathin fibronectin fibers

This study examined the behavior of rat tendon fibroblasts, baby hamster kidney fibroblasts, macrophage-like P388D1 cells, and neurons from rat dorsal root ganglia, cultured on fibronectin strands 0.2-5 micrograms in diameter. We investigated cell spreading, orientation, formation of focal contacts, the speed of cell movement, and the speed of neurite outgrowth in cells cultured on fibronectin strands, glass covered with fibronectin, and plain, nontreated glass. Fibronectin strands significantly promoted cell spreading and caused a marked alignment of all kinds of cells to the direction of the fiber. The fibers caused the alignment of actin filaments in fibroblasts and focal contacts in fibroblasts and macrophages and increased polymerization of F-actin in cells. Fibronectin fibers also increased the speed and persistence of cell movement and the rate of neurite outgrowth. Macrophages grown on fibronectin fibers produced numerous actin-rich microspikes and adopted a polarized, migratory phenotype. These findings indicate that fibronectin strands, resembling natural components of the extracellular matrix, are more effective in activating various types of cells then two-dimensional, fibronectin-covered substrata. The results also confirm the suitability of the three-dimensionally oriented fibronectin form for use in clinical practice.

Influence of the surface structure of titanium materials on the adhesion of fibroblasts

Of utmost importance for the successful use of an implant is a good adhesion of the surrounding tissue to the biomaterial. In addition to the surface composition of the implant, the surface topography also influences the properties of the adherent cells. The aim of this investigation was thus to study the influence of the surface structure of the substrate on the formation of focal contacts and on the orientation of cultivated gingival fibroblasts by means of fluorescence microscopy. A further goal was to determine the effect of the material composition on the cell shape, on the assumption that in each case a lengthening of the cells can be expected to provide a more favourable adhesion behaviour than a spherical cell shape. In order to describe the shape of the cell, a shape factor was defined which was calculated from the area covered by the cells and from their circumference. To determine the influence of the surface structure, substrate platelets of cp-titanium, TiAl6V4 and TiTa30 were ground. Onto these specimens human gingival fibroblasts of the 5th to 7th passages were cultivated. After a culture time of two days the cells were fixed and stained. The number of orientated cells was determined as a function of the surface roughness of the substrate. The number of orientated cells was shown to increase---independent of the material---with increasing roughness of the ground substrate. On a polished surface the number of orientated cells was 11% (average peak-to-valley height 0.04 microns); at a peak-to-valley height of 1.36 microns the number of orientated cells increased to 72%. It could be observed that the orientated cells had a higher density of focal contacts where they were in contact with the edges of the grinding grooves. In order to determine the effect of the surface composition, gingival fibroblasts were cultured for 14 d on polished substrate specimens of cp-titanium, TiAl6V4 and TiTa30 and examined for differences in shape. The cells grown on cp-titanium and on TiTa30 had shape factors of 1.76 and 1.58 respectively, whereas those grown on TiAl6V4 had a shape factor of 0.93. The unfavourable spherical shape of the fibroblasts (resulting in a poor adhesion) grown on TiAl6V4 after a culture period of 14 d may be the result of a locally increased vanadium concentration in the substrate, with an accompanying increase in the release of toxic vanadium ions.

Endothelial cells on Dacron vascular prostheses: adherence, growth, and susceptibility to neutrophils

Human umbilical vein endothelial cells (HUVEC) on knitted and woven Dacron prostheses were compared with HUVEC on smooth surfaces (tissue culture polystyrene, PET film, and Natrix) with regard to adherence, growth, and susceptibility to injury by neutrophils (PMN). These are properties of importance for successful seeding or coating of prostheses. For prosthetic material of given macroscopic dimensions, more endothelial cells (EC) adhered than to smooth surfaces. However, the prostheses had a greater effective surface area as determined by the number of EC at confluency. When this parameter was taken into account, fewer EC were found adherent to prosthetic material per unit effective surface area than for the smooth surface substrates. Growth on prostheses was clearly inferior to that on smooth surfaces, and EC on prostheses were more susceptible to attack by activated PMN than on smooth surfaces. These differences may reflect the topographic differences in cells attached to fibers where they assume more distorted shapes by stretching to span fibers.

Cellular responses to chemical and morphologic aspects of biomaterial surfaces. I. A novel in vitro model system

The clinical success of any implant is directly dependent upon the cellular behavior in the immediate vicinity of the interface established between the host tissue and the biomaterial(s) used to fabricate the device. All biomaterials have morphologic, chemical, and electrical surface characteristics that influence the cellular response to the implant. Quantitative measurement of specific aspects of this local host response to different but well-characterized biomaterial surfaces provides a crucial link in the understanding of the overall phenomenon of implant biocompatibility. A system has been devised for in vitro examination of responses of cells to controlled but independent changes in both the chemistry and morphology of polystyrene (PS) tissue culture surfaces. Micromachined silicon wafers were used as templates to solvent-cast PS replicas [using 0, 1, or 2 wt % styrene (S) monomer additions] with either none, 0.5- or 5.0-microns-deep surface grooves arranged in a radial array. When all possible morphologies were combined with all possible polymers, nine model biomaterial surfaces (MBSs) were produced. The chemical characteristics of the MBSs were determined using electron spectroscopy for chemical analysis, secondary ion mass spectroscopy, and contact angle techniques and were found to be distinct. The types and amount of proteins that adsorb onto these surfaces from serum containing media were examined and found to consist of multiple molecular layers of relatively uniform composition. Self-contained tissue culture vessels formed from the MBSs were capable of supporting the growth of confluent cultures of rat calvarial cells. The model biomaterial system described here can be used to examine how simultaneous stimuli resulting from the chemical and morphological characteristics of a test material may influence biologic responses. Such multifactorial biocompatibility research is needed to properly document material-host interactions.

Guidance of oligodendrocytes and their progenitors by substratum topography

Oligodendrocyte progenitors arise in subventricular zones and migrate extensively during development before differentiating into mature oligodendrocytes, which myelinate nerve tracts in the central nervous system. We have used microfabricated substrata, containing periodic patterns of contours similar to those of central nervous system axons to assess the influence in vitro of substratum topography on oligodendrocytes isolated from 7 day rat optic nerve. Antiganglioside antibody A2B5 positive oligodendrocyte-type 2 astrocyte progenitors, and galactocerebroside positive and myelin basic protein positive oligodendrocytes, were highly aligned by surface contours as small as 100 nm depth and 260 nm repeat spacing. Rat optic nerve astrocytes also aligned on surface contours, but rat hippocampal and cerebellar neurons were unresponsive. Oligodendrocytes demonstrated enhanced parallel extension of their processes on narrow repeating topography in an arrangement similar to that found in the intact optic nerve. This is in marked contrast to the phenotype displayed by this cell type on planar substrata. Neither oligodendrocytes nor oligodendrocyte-type 2 astrocyte progenitors showed high-order F-actin cytoskeletal networks; thus their alignment on gratings is unlikely to result from deformation of actin cables and focal contacts. In contrast, aligned astrocytes showed striking arrangements of actin stress fibres. These results establish glial cells as potentially the most topographically sensitive cell types within the central nervous system. Furthermore, the topographical pattern inducing maximal alignment of oligodendrocyte lineage cells corresponds to the diameters of single axons within the 7 day optic nerve. Thus the migration of oligodendrocyte-type 2 astrocyte progenitors and axonal ensheathment by oligodendrocytes may be guided by axonal topography within the developing nerve.

Effect of parallel surface microgrooves and surface energy on cell growth

To evaluate the effect of surface treatment and surface microtexture on cellular behavior, smooth and microtextured silicone substrata were produced. The microtextured substrata possessed parallel surface grooves with a width and spacing of 2.0 (SilD02), 5.0 (SilD05), and 10 microns (SilD10). The groove depth was approximately 0.5 microns. Subsequently, these substrata were either left untreated (NT) or treated by ultraviolet irradiation (UV), radiofrequency glow discharge treatment (RFGD), or both (UVRFGD). After characterization of the substrata, rat dermal fibroblasts (RDF) were cultured on the UV, RFGD, and UVRFGD treated surfaces for 1, 3, 5, and 7 days. Comparison between the NT and UV substrata revealed that UV treatment did not influence the contact angles and surface energies of surfaces with a similar surface topography. However, the contact angles of the RFGD and UVRFGD substrata were significantly smaller than those of the UV and NT substrata. The dimension of the surface microevents did not influence the wettability characteristics. Cell culture experiments revealed that RDF cell growth on UV-treated surfaces was lower than on the RFGD and UVRFGD substrata. SEM examination demonstrated that the parallel surface grooves on the SilD02 and SilD05 substrata were able to induce stronger cell orientation and alignment than the events on SilD10 surfaces. By combining all of our findings, the most important conclusion was that physicochemical parameters such as wettability and surface free energy influence cell growth but play no measurable role in the shape and orientation of cells on microtextured surfaces.

Substratum surface topography alters cell shape and regulates fibronectin mRNA level, mRNA stability, secretion and assembly in human fibroblasts

The regulation of cell shape, fibronectin mRNA level, secretion and assembly by substratum surface topography was investigated in early passage human gingival fibroblasts cultured on titanium-coated smooth or V-shaped grooved substrata produced by micromachining. Cells on grooved surfaces were significantly elongated and orientated along the grooves of the substratum, while cell height, measured using confocal scanning laser microscopy, was approximately 1.5-fold greater than that of cells on smooth surfaces. Northern hybridization analysis revealed that on a per cell basis the grooved surface increased the amounts of fibronectin mRNA/cell approximately 3.5-fold at 16 hours, approximately 1.9-fold at 40 hours and approximately 2.2-fold at 90 hours, while the mRNA levels of the house-keeping gene glyceraldehyde-3-phosphate dehydrogenase (GAPD) were constant. The amounts of secreted fibronectin on the grooved surface were increased approximately 2-fold for all time points. The stability of fibronectin mRNA was also altered by substratum surface topography. The half-life of fibronectin mRNA on smooth surfaces was estimated to be approximately 5 hours, but on the grooved surfaces the half-life of fibronectin mRNA showed a two-phase response: a rapid 60% reduction in the first half-life (t1/2 approximately 2 hours) and a 2.4-fold increase in the second half-life (t1/2 approximately 12 hours) relative to that observed on the smooth surface. The GAPD mRNA half-lives were essentially unaffected by the surface topography of the substrata. The grooved surface was also found to alter the amount of fibronectin assembled into the extracellular matrix, producing a approximately 2-fold increase in the cultures at all time points. It thus appears that substratum surface topography alters cell shape and modulates fibronectin at the transcriptional and post-transcriptional levels, as well as the amount of fibronectin assembled into extracellular matrix. Micromachining, which has the ability to precisely control surface topography over a wide range of dimensions and shapes, appears to be a useful technique in investigating the relationship between cell shape and function.

Transverse pattern of microfilament bundles induced in epitheliocytes by cylindrical substrata

Cylindrical culture substrata are known to induced longitudinal orientation of polarized fibroblasts and corresponding alignment of actin microfilament bundles in these cells. We studied microfilament bundle distribution in two cell types, fibroblasts and epitheliocytes, spread on two kinds of anisotropic substrata, quartz glass cylinders with a diameter 32 microns and narrow (25-40 microns wide) flat glass adhesive strips with non-adhesive borders. Rat embryo and human diploid fibroblasts, as expected, formed predominantly longitudinally aligned bundles on both substrata. In contrast, transverse bundles on cylinders and randomly oriented bundles on flat strips were formed in IAR-2 and MDCK epithelial cells. We interpret these data as showing that the epitheliocyte attempts to override the guiding influence of anisotropic substrata. The microfilament bundle pattern on cylinders depends on the integrity of the microtubules. Colcemid-induced microtubule depolymerization caused formation of longitudinal as well as transverse bundles both in fibroblasts and epitheliocytes, thus diminishing the differences in microfilament bundle patterns in two cell types. These results show that microtubules control the cell-type-specific distribution of microfilament bundles both in polarized fibroblasts and in discoid epitheliocytes. However, the results of this control are opposite: microtubules enhance cell polarization in fibroblasts, but prevent it in epithelial cells.

Role of the cytoskeleton in the reaction of fibroblasts to multiple grooved substrata

The role of the cytoskeleton and cell attachments in the alignment of baby hamster kidney fibroblasts to ridge and groove substratum topography was investigated using confocal scanning microscopy. This was carried out with normal cells and cells treated with the cytoskeleton modifiers cytochalasin D, colcemid, and taxol. Actin was localised with fluorescent phalloidin. Tubulin, vinculin, and intracellular adhesion molecule-1 were visualised by indirect immunofluorescence. The spreading, elongation, and orientation of the cells after 24 h of culture in these conditions were measured on grooves of 5, 10, and 25 microns width and 0.5, 1, 2, and 5 microns depth. We have also observed events over the first 30 min of cell attachment. Five minutes after cell attachment, F-actin condensations were seen close to the intersection of groove wall and ridge top, that is, at a topographic discontinuity. The condensations were often at right angles to the groove edge and showed a periodicity of 0.6 microns. Vinculin arrangement at the early stages of cell spreading was similar to that of actin. Organisation of the microtubule system followed later, becoming obvious at about 30 min after cell plating. The Curtis and Clark theory (that cells react to topography primarily at lines of discontinuity in the substratum by actin nucleation) is supported by these results. The use of cytoskeletal poisons did not entirely abolish cell reaction to grooves. Colcemid increased cell spreading and reduced cell orientation and elongation. Cytochalasin D reduced cell spreading, orientation, and elongation. Taxol reduced cell elongation but did not affect cell spreading and orientation. We conclude that the aggregation of actin along groove/ridge boundaries is a primary driving event in determining fibroblast orientation on microgrooved substrata.

Variation in contact guidance by human cells on a microstructured surface

Contact guidance induced by the surface topography of the underlying substratum influences the interaction of tissue cells with implanted material. It was the aim of this study to compare the reaction of different human cells on the same surface microtexture. After staining with fluoresceinediacetate, the orientation of human fibroblasts, gingival keratinocytes, neutrophils, monocytes, and macrophages on a regular surface microstructure of 1 microns pitch and 1 microns depth was analyzed by fluorescence microscopy. Contact guidance could not be observed in the experiments with keratinocytes and neutrophils, but 100% of the fibroblasts and approximately 20% of the monocytes and macrophages reacted with alignment. After 2 h some of the macrophages extended long dendritic cellular processes parallel to the long axis of the microstructures.

Morphogenetic response of cultured normal and transformed fibroblasts, and epitheliocytes, to a cylindrical substratum surface. Possible role for the actin filament bundle pattern

Morphometric characteristics such as cell area, dispersion, elongation and orientation were studied in normal and transformed fibroblasts, and in epitheliocytes cultured on flat or cylindrical substrata. Cylindrical surfaces with a high degree of curvature (12-13 or 25 microns radii) were shown to affect cell size, shape and alignment. The reaction of the cells to the curvature of cylindrical substrata was different in various cell types studied and depended on the pattern of actin microfilament bundles. The cells containing pronounced straight actin bundles (mouse embryo fibroblasts at the polarization stage of spreading, single spread cells of the ‘normal’ epithelial FBT line or the fully transformed epithelial IAR 6–1 line) were relatively resistant to bending around a cylindrical substratum, and became elongated and oriented along the cylinder. Cells with circular actin bundles as the predominant pattern (mouse embryo fibroblasts at the radial stage of spreading, single spread cells of ‘normal’ epithelial IAR 20 line) and cells with insufficient or no actin bundles (transformed fibroblastic L line) were prone to bending around a cylinder with much less pronounced elongation and orientation along its axis. The data obtained indicate that the reaction of cultured cells to the geometry of the substratum surface and, in particular, to a cylindrical surface is determined not only by the presence or absence of actin microfilament bundles but by their pattern in the cell.

Fibroblast anchorage to microtextured surfaces

The contact between tissue and the implanted biomaterial is influenced by the micromorphology of the implant surface as well as biomechanical reactions. This effect is mediated by subcellular morphological structures and can affect the anchorage of the material inside the body of the host. The aim of the present study was to ascertain by transmission electron microscopy how human gingival fibroblasts interact with surface events. A special replica technique was used to produce a line pattern of 1 micron pitch with a depth of 1 micron. It was demonstrated, by transmission electron microscopy, that cells seeded on this surface extended cellular processes into the grooves, leading to an intensive contact and probably to mechanical interlocking. The typical morphological structures at several points indicated the presence of focal adhesion sites.

The sequence of alignment of microtubules, focal contacts and actin filaments in fibroblasts spreading on smooth and grooved titanium substrata

Contact guidance refers to the reactions of cells with the topography of their substratum. Current hypotheses on the mechanism of contact guidance focus on the dynamic behaviour of the cytoskeletal components, but most observations have been made on cells that have already become oriented with topographic features of the substratum. The purpose of this study was to examine the sequence in which microtubules, focal contacts and microfilament bundles become aligned to the substratum topography as fibroblasts spread on grooved substrata. Human gingival fibroblasts were trypsinized and seeded onto grooved titanium surfaces produced by micromachining, as well as onto control smooth surfaces. After observation and photography of the spreading cells at times up to 6 hours, the cells were fixed and exposed to one or more of the following antibodies or fluorescent stains: phallacidin to stain actin filaments, monoclonal anti-tubulin, monoclonal anti-vinculin, anti-mouse IgG labelled with Texas-Red or FITC, and/or an aldehyde-reactive stain to identify the cell outline. The cells were photographed and cell area, shape and orientation were calculated. Cells were also examined with confocal microscopy to obtain optical sections so that cell height as well as the precise locations of the cytoskeletal components with respect to the vertical dimension of the grooved substrata could be determined. Microtubules were the first element to become oriented parallel to the direction of the grooves and were first aligned at the bottom of the grooves. This alignment of microtubules was evident as early as 20 minutes after plating and preceded the orientation of the cell as a whole. Aligned actin microfilament bundles were not observed until 40–60 minutes and were observed first at the wall-ridge edges. At early times, focal contacts were distributed radially, but only after 3 hours did the majority of cells demonstrate aligned focal contacts. If the first cytoskeletal component to become aligned is the prime determinant of cell orientation, then these data suggest that microtubules in human gingival fibroblasts may determine cell orientation on grooved titanium surfaces. By analogy with microtubule behaviour in other systems, we suggest that microtubule orientation on grooved substrata may occur as a result of the substratum establishing shear-free planes.

Surface micromorphology and cellular interactions

Contact guidance induced by the topographical properties of the underlying substratum is of great importance in morphogenesis and also influences the interaction of tissue cells with implanted material. A large body of evidence has accumulated since the first detection of this phenomenon in 1910. Several major hypotheses have been developed to explain the observed cell behaviour. The technological progress enabled researchers to produce pure substrata with a defined and controlled surface microgeometry. Based on these specimens, it could be demonstrated that cytoskeletal structures and receptors forming focal adhesions most likely are involved in contact guidance. In a study using human gingival fibroblasts, the reaction of these cells to a regular surface microstructure of 1 micron pitch and 1 micron depth was tested. After two days on the microstructured samples, all the cells showed a strong alignment to the topography of the surface. Transmission electron microscopy revealed that the cells either bridged the grooves or conformed to the surface structures. The latter confirms earlier investigations with porous subcutaneous implants, where the inflammatory reaction and the formation of a fibrous tissue capsule was reduced due to enhanced tissue adhesion.

Micropatterned substratum adhesiveness: a model for morphogenetic cues controlling cell behavior

It is generally considered that tracks of cell adhesiveness are important in controlling cell migration during the development and regeneration of many tissues. In order to investigate this experimentally, a number of techniques have in the past been employed to make patterns of differential adhesiveness for in vitro studies. However, practical limitations on patterning resolution and the introduction of residual topography to the experimental substrata have restricted their usefulness. Here we describe a simplified photolithographic technique for patterning cell adhesiveness which allows a high degree of flexibility and precision. We have quantified, using adhesion and spreading characteristics of BHK cells, the differential adhesiveness that can be created on patterned surfaces, how this alters with the duration of exposure to serum proteins, and how this, in turn, relates to the persistence of cell patterning despite increases in cell density. We believe that this technique will prove extremely useful for the detailed in vitro examination of the mechanisms controlling cell behavior as it offers a degree of precision and ease of fabrication that has previously been unavailable.

Immunolocalization of proteins specific for adhaerens junctions in human gingival epithelial cells grown on differently processed titanium surfaces

The localization of desmoplakins 1 and 2 (DP 1&2), components of desmosomes, vinculin, and actin, was studied in gingival epithelial cells grown on cell culture glass and on titanium plates with various surface topography. The results showed that epithelial cells attached and spread more readily on smooth than on rough, sandblasted titanium surfaces. Moreover, the cells appeared to develop more granular DP 1&2 immunoreactivity at their ventral surfaces when grown on smooth or etched titanium as compared to glass. In cells grown on sandblasted titanium surfaces, DP 1&2-specific immunoreactivity was primarily located at cell-cell contacts. Cells grown on smooth titanium surfaces harbored a fine network of actin filaments with apparent cell-to-cell organization. Vinculin was confined to cell-cell contact areas. No vinculin-containing focal adhesions could be detected, suggesting that the cells adhere either by means of close contacts, extracellular matrix contacts, or by means of hemidesmosomes. The findings suggest that smooth of finely grooved titanium surfaces could be optimal in maintaining the adhesion and specialized phenotype of gingival epithelial cells.

Spreading of mouse fibroblasts on the substrate with multiple spikes

Mouse embryo fibroblasts were cultivated on special substrates with discontinuous surfaces. The substrates were silicon plates with multiple vertical (65-90 microns height) spike-like silicon microcrystals evenly distributed on the plate surfaces. It was shown that the cells were successfully spread and flattened on these substrates. The spread cells formed several discrete attachment zones at the tops and side surfaces of the spikes; these zones were separated from one another by distances considerably greater than the diameter of the unspread cell. At early stages of spreading the unspread cells attached to the tops of single spikes and extended long filopodia attached to the distant spikes. At later stages the lamellae were formed between the filopodia: probably these filopodia served as guidelines for extension of lamellae and progressive cell spreading. These experiments demonstrated that continuity of substrate surface is not a necessary condition for advanced cell spreading.

In vitro tendon cell growth rates on a synthetic fiber scaffold material and on standard culture plates

Growth rates of rat tendon fibroblasts cultured in a three-dimensional carbon fiber matrix were compared with those of cells cultured on standard flat culture plates. The carbon fiber has been used as a tissue scaffold for tendon and ligament repair in animal and clinical studies. While cell growth on the culture plates appears to follow a growth curve containing a lag phase, a log phase, and plateau phase of growth, cell growth in the fiber matrix was characterized by a suppressed log phase of growth. SEM and cytotoxicity studies indicated that this effect was not caused by growth-inhibiting or cytotoxic substances from the carbon fiber. While we cannot rule out the possibility that cell growth was influenced by the surface chemistry of the carbon substrate, evidence from this and other studies suggests that the observed effect was caused by a lack of readily available surface area for cell attachment and growth on the small fibers. Because cell colonies growing on individual fibers are limited (at least in theory) to growing in two directions only, they enjoy limited opportunities for cell migration and growth--in contrast with cell colonies on flat culture plates. These results suggest fundamental differences in the mechanisms controlling cell growth on planar vs. three-dimensional fiber substrates.