Hydrophobic derivatives of chitosan: characterization and rheological behaviour

Magnetic catechol-chitosan with bioinspired adhesive surface: preparation and immobilization of ω-transaminase

The magnetic chitosan nanocomposites have been studied intensively and been used practically in various biomedical and biological applications including enzyme immobilization. However, the loading capacity and the remained activity of immobilized enzyme based on existing approaches are not satisfied. Simpler and more effective immobilization strategies are needed. Here we report a simple catechol modified protocol for preparing a novel catechol-chitosan (CCS)-iron oxide nanoparticles (IONPs) composites carrying adhesive moieties with strong surface affinity. The ω-transaminase (ω-TA) was immobilized onto this magnetic composite via nucleophilic reactions between catechol and ω-TA. Under optimal conditions, 87.5% of the available ω-TA was immobilized on the composite, yielding an enzyme loading capacity as high as 681.7 mg/g. Furthermore, the valuation of enzyme activity showed that ω-TA immobilized on CCS-IONPs displayed enhanced pH and thermal stability compared to free enzyme. Importantly, the immobilized ω-TA retained more than 50% of its initial activity after 15 repeated reaction cycles using magnetic separation and 61.5% of its initial activity after storage at 4°C in phosphate buffered saline (PBS) for 15 days. The results suggested that such adhesive magnetic composites may provide an improved platform technology for bio-macromolecules immobilized.

Effects of hydrophobic substituents and salt on core-shell aggregates of hydrophobically modified chitosan: light scattering study

In this study we examine two methods of enhancement of aggregation of hydrophobically modified chitosan in dilute aqueous solutions: by increasing the content of n-dodecyl substituents, favoring hydrophobic association, and by increasing the amount of added low molecular weight salt, screening the electrostatic repulsion between similarly charged aggregating chains. By static and dynamic light scattering it was demonstrated that at the growth of the content of hydrophobic groups in the polymer (2-4 mol %) and of the amount of salt in solution (0.025-0.1 M) the weight fraction of aggregates increases, but the aggregation number remains unchanged. This behavior was attributed to the core-shell structure of the aggregates, which provides a low surface energy and strong attraction of associating groups inside the core. At the same time, the effects of the content of hydrophobic groups in the polymer and the ionic strength of the solution on the radii of the aggregates are quite different. Increasing the content of hydrophobic groups induces growth of the gyration radii of the aggregates, but does not affect their hydrodynamic radii. These data suggest the expansion of the hydrophobic core of the aggregates and the contraction of their highly swollen shell. On the other hand, increasing the salt concentration leads to a decrease of both the gyration and hydrodynamic radii of the aggregates, which is due to partial screening of electrostatic repulsion between similarly charged units and lowering of the osmotic pressure of counterions confined inside the aggregates.

FTIR studies of plasticized poly(vinyl alcohol)-chitosan blend doped with NH4NO3 polymer electrolyte membrane

Fourier transform infrared (FTIR) spectroscopy studies of poly(vinyl alcohol) (PVA), and chitosan polymer blend doped with ammonium nitrate (NH(4)NO(3)) salt and plasticized with ethylene carbonate (EC) have been performed with emphasis on the shift of the carboxamide, amine and hydroxyl bands. 1% acetic acid solution was used as the solvent. It is observed from the chitosan film spectrum that evidence of polymer-solvent interaction can be observed from the shifting of the carboxamide band at 1660 cm(-1) and the amine band at 1591 cm(-1) to 1650 and 1557 cm(-1) respectively and the shift of the hydroxyl band from 3377 to 3354 cm(-1). The hydroxyl band in the spectrum of PVA powder is observed at 3354 cm(-1) and is observed at 3343 cm(-1) in the spectrum of the PVA film. On addition of NH(4)NO(3) up to 30 wt.%, the carboxamide, amine and hydroxyl bands shifted from 1650, 1557 and 3354 cm(-1) to 1642, 1541 and 3348 cm(-1) indicating that the chitosan has complexed with the salt. In the PVA-NH(4)NO(3) spectrum, the hydroxyl band has shifted from 3343 to 3272 cm(-1) on addition of salt from 10 to 30 wt.%. EC acts as a plasticizing agent since there is no shift in the bands as observed in the spectrum of PVA-chitosan-EC films. The mechanism of ion migration is proposed for the plasticized and unplasticized PVA-chitosan-NH(4)NO(3) systems. In the spectrum of PVA-chitosan-NH(4)NO(3)-EC complex, the doublet CO stretching in EC is observed in the vicinity 1800 and 1700. This indicates that there is some interaction between the salt and EC.

A comparison of the activation energy of viscous flow for hen egg-white lysozyme obtained on the basis of different models of viscosity for glass-forming liquids

The paper presents the results of viscosity determinations on aqueous solutions of hen egg-white lysozyme at a wide range of concentrations and at temperatures ranging from 5°C to 55°C. On the basis of these measurements and different models of viscosity for glass-forming liquids, the activation energy of viscous flow for solutions and the studied protein, at different temperatures, was calculated. The analysis of the results obtained shows that the activation energy monotonically decreases with increasing temperature both for solutions and the studied protein. The numerical values of the activation energy for lysozyme, calculated on the basis of discussed models, are very similar in the range of temperatures from 5°C to 35°C.

Application of spectroscopic methods for structural analysis of chitin and chitosan

Chitin, the second most important natural polymer in the world, and its N-deacetylated derivative chitosan, have been identified as versatile biopolymers for a broad range of applications in medicine, agriculture and the food industry. Two of the main reasons for this are firstly the unique chemical, physicochemical and biological properties of chitin and chitosan, and secondly the unlimited supply of raw materials for their production. These polymers exhibit widely differing physicochemical properties depending on the chitin source and the conditions of chitosan production. The presence of reactive functional groups as well as the polysaccharide nature of these biopolymers enables them to undergo diverse chemical modifications. A complete chemical and physicochemical characterization of chitin, chitosan and their derivatives is not possible without using spectroscopic techniques. This review focuses on the application of spectroscopic methods for the structural analysis of these compounds.

Modified chitosans for oral drug delivery

The cationic polysaccharide chitosan has been extensively studied for oral drug delivery. In recent years, chemically modified chitosans developed in order to improve the properties of chitosan for oral drug delivery have gained increasing attention. Representatives of these novel polymers are trimethyl-chitosans, thiolated chitosans, carboxymethyl chitosan and derivatives, hydrophobic chitosans, chitosan succinate and phthalate, PEGylated chitosans and chitosan-enzyme inhibitor conjugates. Besides their use for oral delivery of therapeutic peptides and proteins, they have recently been evaluated regarding their potential for the delivery of other substance classes, including genes and efflux pump substrates. Within the current review, various modified chitosan derivatives, their properties and synthesis are discussed.

Various methods for determination of the degree of N-acetylation of chitin and chitosan: a review

Chitin, chitosan, and their derivatives have been identified as versatile biopolymers for a broad range of agriculture and food applications. Up to now, several methods have been developed to determine degree of N-acetylation, DA, for chitin and chitosan. In this article, an effort has been made to review the available literature information on the DA determination. These methods are classified into three categories: (1) spectroscopy (IR, (1)H NMR, (13)C NMR, (15)N NMR, and UV); (2) conventional (various types of titration, conductometry, potentiometry, ninhydrin assay, adsorption of free amino groups of chitosan by pictric acid); (3) destructive (elemental analysis, acid or enzymatic hydrolysis of chitin/chitosan and followed by the DA measurement by colorimetry or high performance liquid chromatography, pyrolysis-gas chromatography, and thermal analysis using differential scanning calorimetry) methods. These methods have been compared for their performances and limitations as well as their advantages and disadvantages. The use of IR and NMR spectroscopy methods provides a number of advantages. They do not need long-term procedures to prepare samples, and they provide information on the chemical structure. (1)H NMR and UV techniques are more sensitive than IR, (13)C NMR, and (15)N NMR spectroscopy. The IR technique is mostly used for a qualitative evaluation and comparison studies. Conventional methods are not applicable for highly acetylated chitin. The results of the latter methods are affected by ionic strength of the solvent, pH, and temperature of solution. In destructive methods, longer times are needed for the measurements compared to spectroscopy and conventional methods, but they are applicable for the entire range of the DA.

Emulsification and stabilization mechanisms of o/w emulsions in the presence of chitosan

We study emulsification of paraffin oil in aqueous solutions of chitosan without adding any other surfactant. By monitoring the surface tension of the water-paraffin interface, we show that chitosan itself has only a weak surface activity. Nevertheless, chitosan dissolved in the aqueous phase allows the dispersion of oil by increasing the matrix viscosity and provides stabilization of the oil-water interface by forming a dense polyelectrolitic brush on the water side of this interface. We characterize emulsions with varying oil content, and concentrations of chitosan, and follow their long-term stability. Finally, we show that by precipitating the chitosan the rigid elastic network is formed in the aqueous phase, making a very stable suspension.

Influence of polyelectrolyte chemical structure on their interaction with lipid membrane of zwitterionic liposomes

In this paper we extend our previous experimental work on interaction between polyelectrolytes and liposomes. First, the adsorption of chitosan and alkylated chitosan (cationic polyelectrolytes) with different alkyl chain lengths on lipid membranes of liposomes is examined. The amount of both chitosans adsorbed remains the same even if more alkylated polysaccharide has to be added to get saturation if compared with unmodified chitosan. It is demonstrated that alkyl chains do not specifically interact with the lipid bilayer and that electrostatic interaction mechanism governs the chitosan adsorption. The difference observed between unmodified and alkylated chitosans behavior to reach the plateau can be interpreted in terms of a competition between electrostatic polyelectrolyte adsorption on lipid bilayer and hydrophobic autoassociation in solution (which depends on the alkyl chain length). Second, interaction of liposomes with hyaluronan (HA) and alkylated hyaluronan (anionic polyelectrolytes) is analyzed. The same types of results as discussed for chitosan are obtained, but in this case, autoassociation of alkylated HA only occurs in the presence of salt excess. Finally, a first positive layer of chitosan is adsorbed on the lipid membrane, followed by a second negative layer of HA at three different pHs. This kind of multilayer decoration allows the control of the net charge of the composite vesicles. A general conclusion is that whatever the pH and, consequently, the initial charge of the liposomes, chitosan adsorption gives positively charged composite systems, which upon addition of hyaluronan, give rise to negatively charged composite vesicles.

Heat-induced transfer of protons from chitosan to glycerol phosphate produces chitosan precipitation and gelation

Recently, chitosan dissolved in solutions containing glycerol phosphate (GP) were found to undergo a sol-gel transition when heated and the proposed gelling mechanism was based on increasing hydrophobic interactions with temperature. Subsequently, an investigation of ionization and precipitation behavior of chitosan, including dependencies on temperature, added salt, and fraction of deacetylated monomers (fD) was performed. This latter study revealed important differences in the temperature dependence of pKa of chitosan versus GP and led us to propose an alternative hypothesis for the mechanism of gelation in chitosan-GP systems whereby heat induces transfer of protons from chitosan to glycerol phosphate thereby neutralizing chitosan and allowing attractive interchain forces to form a physical gel. To investigate this specific molecular thermogelling mechanism, temperature ramp experiments on dilute chitosan-GP solutions were performed. Chitosans with fD of 0.72 and 0.98 were used to prepare solutions with a range of molar ratios of GP to chitosan glucosamine monomer of 1.25 to 10 and with 0 or 150 mM added monovalent salt. Light transmittance measurements were performed simultaneously to indicate precipitation in these dilute systems as a surrogate for gelation in concentrated systems. Measured temperatures of precipitation ranged from 15 to 85 degrees C, where solutions with less GP (used in a disodium salt form) had lower precipitation temperatures. A theoretical model using acid-base equilibria with temperature dependent pKa's, including the electrostatic contribution from the polyelectrolyte nature of chitosan, was used to calculate the degree ionization of chitosan (alpha, the fraction of protonated glucosamine monomer) as a function of temperature and showed a significant decrease in alpha with increased temperature due to proton transfer from chitosan to GP. This heat-induced proton transfer from chitosan to GP was experimentally confirmed by 31P NMR measurements during temperature ramp experiments since the chemical shift of 31P of GP is an indicator of its level of protonation. By assuming average temperature independent values of alpha p that were calculated from measured T(p), the model was able to accurately predict measured temperatures of precipitation (T(p)) of all chitosan-GP mixtures. The resulting alpha(p) were temperature independent but increased with increased chitosan fD and with increased salt. Measurements and theory revealed that T(p) can be adjusted in a predictable manner by changing the chitosan-GP molar ratio and thereby systematically tailored to obtain a large range of precipitation temperatures. Finally, similar temperature ramp experiments using inorganic phosphate and MES in place of GP demonstrated that the temperature-induced precipitation of chitosan also occurs with these buffers, confirming that the key feature of the buffer used with chitosan is its ability to absorb heat-stimulated release of chitosan protons and facilitate chitosan neutralization. A theoretical expression for the variation of chitosan ionization degree with temperature in a system composed of two titratable species (chitosan and buffer) was derived and allowed us to establish the required characteristics of the buffer for efficient heat-stimulated proton transfer between a chitosan and the buffer. These results provide a useful explanation for the mechanism of heat-induced gelation of chitosan-based systems that could be exploited for numerous practical applications.

Evaluation of mucoadhesiveness of polymers by BIACORE method and mucin-particle method

To evaluate the reliability of the BIACORE method as a useful method for measuring the mucoadhesive interaction between chitosan and mucin, the mucin-particle method was used for comparison. In this study, the adhesivities of different-molecular-weight chitosans (chitosan Mw. 150,000, CS; low-molecular-weight chitosan, LCS) and hydrophobically modified chitosans (dodecylated CS, d-CS; dodecylated LCS, d-LCS) to mucin were determined. The BIACORE method showed that CS, LCS and d-CS could interact with mucin based on the increased resonance unit (RU) response after mucin was passed over the chitosans-immobilized sensor chip surface. Sensorgrams obtained from the interaction between these polymers and mucin also indicated the rate and strength of binding reaction. The rate and strength were higher for unmodified chitosans than hydrophobically modified chitosans. The simple in vitro mucoadhesive test or mucin-particle method revealed that the turbidity of unmodified chitosan/mucin mixtures was higher than that of dodecylated chitosans for all concentration of chitosans and mucin. The results from both BIACORE and the mucin-particle method implied that hydrophobic modification of chitosan reduced its adhesivity to mucin. The results from these two methods corresponded well. Therefore, the BIACORE method has promised as an alternative method for evaluating the adhesivity of adhesive polymers to mucin.

Effect of Electrolyte Concentration on the Dynamic Surface Tension and Dilational Viscoelasticity of Adsorption Layers of Chitosan and Dodecyl Chitosan

The effect of an external salt (AcONa) on the kinetics of adsorption and structure formation inside the adsorption layers (ALs) of chitosan (Ch) and dodecyl chitosan (C12Ch) as well as on the frequency dependence of the complex dilational elasticity modulus of these layers has been studied. The complex dilational elasticity modulus of adsorption layers of polymers has been measured on the drop tensiometer (Tracker, IT Concept, France) upon applying a small sinusoidal variation of the drop area with a given frequency, omega, in the range from 10(-2) to 0.63 rad/s and recording the variation of the surface pressure. It has been found that, in the absence of the salt, the dilational storage modulus, E'(omega), of ALs of both Ch and C12Ch is lower with regard to the loss modulus, E' '(omega), in the whole range of frequencies used, testifying for the liquidlike rheological behavior of these layers. With an increase of the salt concentration up to CAcONa > 0.1 M, the ALs become solidlike, as shown when E'(omega) > E' '(omega). Consequently, the characteristic frequency, omega c, corresponding to the intercept between the E'(omega) and E' '(omega) curves, gradually varies from omega c > 1 rad/s to omega c < 0.01 rad/s when the salt concentration is increased from zero to CAcONa = 1 M. Hydrophobically modified C12Ch, having long grafted alkyl chains, exhibited a higher sensitivity to the presence of salt than Ch: the former solidifies more readily and at lower salt concentrations than the latter. It has been found that the experimental E'(omega) and E' '(omega) curves exhibit two characteristic relaxation frequencies, omega 01 approximately 1 rad/s and omega 02 approximately 10(-3)-10(-2) rad/s, whose physical meaning and values were related to the structure of the ALs and to the competitive contribution of electrostatic and hydrophobic interactions between amino and nonpolar groups of Ch and C12Ch to the formation of a gel-like network inside the polymeric film at the interface.