Blood compatibility and biodegradability of partially N-acylated chitosan derivatives

In vitro and in vivo evaluation of chitosan microspheres with different deacetylation degree as potential embolic agent

To evaluate the potential of N-acetylated chitosan microspheres used as a chemoembolic agent in vivo and in vitro. Calibrated spherical chitosan microspheres (CMs) were prepared via Water-in-Oil emulsification method and CMs were acetylated (ACMs). The swelling rate of CMs was greatly affected by pH than that of ACMs and both of them affected by temperature. Microspheres with excellent thermal stability demonstrated controllable degradation in lysozyme solution. Doxorubicin was released from microspheres in vitro and exhibited excellent control release profile. ACMs caused hemolysis less than CMs (<5% of the time). Co-culture with mouse embryo fibroblasts revealed that microspheres have non-cytotoxic nature. Microspheres planted in a rat gluteal muscle demonstrated that it were biodegradable and biocompatible. ACMs were performed in rabbit ear embolization model and ischemic necrosis on ear was visible due to the vascular occlusion after 15 days. Acetylated chitosan microspheres could be used as potential biocompatible and biodegradable embolic agents.

Chitosan hydrogel as siRNA vector for prolonged gene silencing

Background

The periodontitis is one of the most prevalent diseases with alveolar resorption in adult people and is the main cause of the tooth loss. To investigate the possibility for protecting the loss of alveolar bone in periodontal diseases, a RNAi-based therapeutic strategy is applied for silencing RANK signaling using thermosensitive chitosan hydrogel as siRNA reservoir and vector.

Results

The thermosensitive chitosan hydrogel was formed from solution (PH = 7.2, at 4°C) at 37°C within 8 minutes. The degradation rates of hydrogel were ~50% and 5% (W remaining/W beginning) in the presence and absence of lysozyme, respectively, over a period of 20 days. The concurrent cumulative in vitro release of Cy3-labeled siRNA from the hydrogel was 50% and 17% over 14 days, with or without lysozyme digestion, respectively. High cell viability (>88%) was maintained for cells treated with hydrogel loaded with RANK specific siRNA and RANK knockdown was prolonged for up to 9 days when cells were incubated with siRNA/hydrogel complex. In vivo release of siRNA was investigated in a subcutaneous delivery setup in mice. The fluorescent signal from siRNA within hydrogel was remained for up to 14 days compared to less than one day for siRNA alone.

Conclusions

Chitosan hydrogel can potentially serve as a suitable reservoir and vector for local sustained delivery of siRNA in potential therapy.

Influence of Layer-by-Layer Polyelectrolyte Deposition and EDC/NHS Activated Heparin Immobilization onto Silk Fibroin Fabric

To enhance the hemocompatibility of silk fibroin fabric as biomedical material, polyelectrolytes architectures have been assembled through the layer-by-layer (LbL) technique on silk fibroin fabric (SFF). In particular, 1.5 and 2.5 bilayer of oppositely charged polyelectrolytes were assembled onto SFF using poly(allylamine hydrochloride) (PAH) as polycationic polymer and poly(acrylic acid) (PAA) as polyanionic polymer with PAH topmost. Low molecular weight heparin (LMWH) activated with 1-ethyl-3-(dimethylaminopropyl) carbodiimide hydrochloride (EDC) and N-hydroxysuccinimide (NHS) was then immobilized on its surface. Alcian Blue staining, toluidine blue assay and X-ray photoelectron spectroscopy (XPS) confirmed the presence of heparin on modified SFF surfaces. The surface morphology of the modified silk fibroin fabric surfaces was characterized by scanning electron microscopy (SEM) and atomic force microscopy (AFM), and obtained increased roughness. Negligible hemolytic effect and a higher concentration of free hemoglobin by a kinetic clotting time test ensured the improved biological performance of the modified fibroin fabric. Overall, the deposition of 2.5 bilayer was found effective in terms of biological and surface properties of the modified fibroin fabric compared to 1.5 bilayer self-assembly technique. Therefore, this novel approach to surface modification may demonstrate long term patency in future in vivo animal trials of small diameter silk fibroin vascular grafts.

Quaternized chitosans bind onto preexisting biofilms and eradicate pre-attached microorganisms

Quaternized chitosans, N,N,N-trimethylchitosans (TMC) with different degree of quaternization were synthesized by reacting methyl iodide with chitosan. The reaction was confirmed by FT-IR and ¹H-NMR characterization. Antimicrobial assay showed that the prepared TMC had potent biocidal effects against planktonic Gram-positive bacteria Staphylococcus epidermidis, Gram-negative bacteria Escherichia coli, and yeast Candida albicans. Bacterial and fungal biofilms were formed on poly(methyl methacrylate) (PMMA) films and then treated with TMC aqueous solutions. Zeta potential measurement suggested that TMC bonded onto the preexisting biofilms. Biofilm-binding kinetics was evaluated in UV studies using phenyl group-labeled TMC as model compounds, which revealed that quaternized chitosans bonded onto the preexisting biofilms rapidly. Colony-forming unit (CFU) determination and SEM, confocal laser scanning microscopy (CLSM) and fluorescence microscopy studies demonstrated that the bonded TMC had powerful biocidal activities to eradicate the pre-attached bacterial and fungal cells in the preexisting biofilms. The biocompatibility of the TMC samples with rat skin fibroblast cells was evaluated in the MTT assay.

Customized biomimetic scaffolds created by indirect three-dimensional printing for tissue engineering

Three-dimensional printing (3DP) is a rapid prototyping technique that can create complex 3D structures by inkjet printing of a liquid binder onto powder biomaterials for tissue engineering scaffolds. Direct fabrication of scaffolds from 3DP, however, imposes a limitation on material choices by manufacturing processes. In this study, we report an indirect 3DP approach wherein a positive replica of desired shapes was printed using gelatin particles, and the final scaffold was directly produced from the printed mold. To create patient-specific scaffolds that match precisely to a patient's external contours, we integrated our indirect 3DP technique with imaging technologies and successfully created custom scaffolds mimicking human mandibular condyle using polycaprolactone and chitosan for potential osteochondral tissue engineering. To test the ability of the technique to precisely control the internal morphology of the scaffolds, we created orthogonal interconnected channels within the scaffolds using computer-aided-design models. Because very few biomaterials are truly osteoinductive, we modified inert 3D printed materials with bioactive apatite coating. The feasibility of these scaffolds to support cell growth was investigated using bone marrow stromal cells (BMSC). The BMSCs showed good viability in the scaffolds, and the apatite coating further enhanced cellular spreading and proliferation. This technique may be valuable for complex scaffold fabrication.

Chemical modification of polysaccharides

This review covers methods for modifying the structures of polysaccharides. The introduction of hydrophobic, acidic, basic, or other functionality into polysaccharide structures can alter the properties of materials based on these substances. The development of chemical methods to achieve this aim is an ongoing area of research that is expected to become more important as the emphasis on using renewable starting materials and sustainable processes increases in the future. The methods covered in this review include ester and ether formation using saccharide oxygen nucleophiles, including enzymatic reactions and aspects of regioselectivity; the introduction of heteroatomic nucleophiles into polysaccharide chains; the oxidation of polysaccharides, including oxidative glycol cleavage, chemical oxidation of primary alcohols to carboxylic acids, and enzymatic oxidation of primary alcohols to aldehydes; reactions of uronic-acid-based polysaccharides; nucleophilic reactions of the amines of chitosan; and the formation of unsaturated polysaccharide derivatives.

Intranasal delivery of cyclobenzaprine hydrochloride-loaded thiolated chitosan nanoparticles for pain relief

The purpose of present investigation was to formulate and characterize the cyclobenzaprine HCl (CBZ)-loaded thiolated chitosan nanoparticles and assessment of in-vitro cell viability, trans-mucosal permeability on RPMI2650 cell monolayer, in-vivo pharmacokinetic and pharmacodynamic study of thiolated chitosan nanoparticles on Swiss albino mice after intranasal administration. A significant high permeation of drug was observed from thiolated chitosan nanoparticles with less toxicity on nasal epithelial cells. Brain uptake of the drug after (99m)Tc labeling was significantly enhanced after thiolation of chitosan. CBZ-loaded thiolated chitosan NPs significantly reverse the N-Methyl-.-Aspartate (NMDA)-induced hyperalgesia by intranasal administration than the CBZ solution. The studies of present investigation revealed that thiolation of chitosan significantly reduce trans-mucosal toxicity with enhanced trans-mucosal permeability via paracellular pathway and brain uptake of a hydrophilic drug (normally impermeable across blood brain barrier) and pain alleviation activity via intranasal route.

Heparin crosslinked chitosan microspheres for the delivery of neural stem cells and growth factors for central nervous system repair

An effective paradigm for transplanting large numbers of neural stem cells after central nervous system (CNS) injury has yet to be established. Biomaterial scaffolds have shown promise in cell transplantation and in regenerative medicine, but improved scaffolds are needed. In this study we designed and optimized multifunctional and biocompatible chitosan-based films and microspheres for the delivery of neural stem cells and growth factors for CNS injuries. The chitosan microspheres were fabricated by coaxial airflow techniques, with the sphere size controlled by varying the syringe needle gauge and the airflow rate. When applying a coaxial airflow at 30 standard cubic feet per hour, ∼300μm diameter spheres were reproducibly generated that were physically stable yet susceptible to enzymatic degradation. Heparin was covalently crosslinked to the chitosan scaffolds using genipin, which bound fibroblast growth factor-2 (FGF-2) with high affinity while retaining its biological activity. At 1μgml(-1) approximately 80% of the FGF-2 bound to the scaffold. A neural stem cell line, GFP+RG3.6 derived from embryonic rat cortex, was used to evaluate cytocompatibility, attachment and survival on the crosslinked chitosan-heparin complex surfaces. The MTT assay and microscopic analysis revealed that the scaffold containing tethered FGF-2 was superior in sustaining survival and growth of neural stem cells compared to standard culture conditions. Altogether, our results demonstrate that this multifunctional scaffold possesses good cytocompatibility and can be used as a growth factor delivery vehicle while supporting neural stem cell attachment and survival.

Anionic carbohydrate-containing chitosan scaffolds for bone regeneration

Scaffolds derived from naturally occurring polysaccharides have attracted significant interest in bone tissue engineering due to their excellent biocompatibility and hydrophilic nature favorable for cell attachment. In this study, we developed composite chitosan (CH) scaffolds containing anionic carbohydrate, such as chondroitin 4-sulfate (CS) or alginate (AG), with biomimetic apatite layer on their surfaces, and investigate their capacity to deliver progenitor cells (bone marrow stromal cells, BMSC) and model proteins with net-positive (histone) and net-negative charge (bovine serum albumin, BSA). The incorporation of CS or AG in CH scaffolds increased compressive modulus of the scaffolds and enhanced apatite formation. Initial burst release of histone was significantly higher than that of BSA from CH scaffold, while the addition of CS or AG in the scaffolds significantly reduced the initial burst release of histone, indicating strong electrostatic interaction between histone and negatively charged CS or AG. The apatite layer created on scaffold surfaces significantly reduced the initial burst release of both BSA and histone. Furthermore, apatite-coated scaffolds enhanced spreading, proliferation, and osteogenic differentiation of BMSC seeded on the scaffolds compared to non-coated scaffolds as assessed by live/dead and alamarBlue assays, scanning electron microscopy (SEM), alkaline phosphatase (ALP) activity, and Picrosirius red staining. This study suggests that apatite-coated CH/CS composite scaffolds have the potential as a promising osteogenic system for bone tissue engineering applications.

Hematotoxicological analysis of surface-modified and -unmodified chitosan nanoparticles

The increasing interest in using chitosan nanoparticles for controlled drug delivery is hampered by its blood incompatibility, especially for intravenous applications. This study investigated the effects of processing solvents (acetic acid/lactic acid), dispersing media (acidic medium/saline), and surface modifiers (polyethylene glycol, polyvinyl alcohol, and ethylenediaminetetraacetatic acid) on the hemocompatibility of chitosan. Blood compatibility of chitosan nanoparticles prepared by ionotropic gelation with altered surface chemistry was evaluated by assessing their hemolytic activity, platelet aggregation, coagulation, and cytokine induction. It was observed that nanoparticles prepared in lactic acid and dispersed in saline did not show hemolysis, platelet aggregation, or coagulation, whereas nanoparticles prepared in acetic acid showed strong hemolysis. Surface modifiers were not observed to significantly affect blood compatibility, with the exception of EDTA, which delayed blood clotting times. Thus, chitosan nanoparticles prepared in lactic acid and dispersed in saline may be an ideal nanocarrier for parenteral applications.

Hemocompatibility of electrospun halloysite nanotube‐ and carbon nanotube‐doped composite poly(lactic‐co‐glycolic acid) nanofibers

One of the major problems of nanofiber scaffold or other devices like cardiovascular or blood‐contacting medical devices is their weak mechanical properties and the lack of hemocompatibility of their surfaces. In this study, halloysite nanotubes (HNTs) and carbon nanotubes (CNTs) were incorporated within poly(lactic‐co‐glycolic acid) (PLGA) nanofibers and the mechanical property and hemocompatibility of both types of composite nanofibers with different doping levels were thoroughly investigated. The morphology and internal distribution of the doped nanotubes within the nanofibers were characterized using scanning electron microscopy and transmission electron microscopy. Mechanical properties of the electrospun nanofibers were tested using a material testing machine. The hemocompatibility of the composite nanofibers was examined through hemolytic and anticoagulant assay, respectively. We show that the doped HNTs or CNTs are distributed in the nanofibers with a coaxial manner and the incorporation of HNTs or CNTs does not significantly change the morphology of the PLGA nanofibers. Importantly, the incorporation of HNTs or CNTs within PLGA nanofibers significantly improves the mechanical property of PLGA nanofibers, and PLGA nanofibers with or without doping of the HNTs and CNTs display good anticoagulant property and negligible hemolytic effect to human red blood cells. With the enhanced mechanical property, great hemocompatibility, and previously demonstrated biocompatibility of both HNTs‐ and CNTs‐doped composite PLGA nanofibers, these composite nanofibers may be used as therapeutic artificial tissue/organ substitutes for tissue engineering applications. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013

Nanomedicine in cardiovascular therapy: recent advancements

Cardiovascular disease (CVD) is comprised of a group of disorders affecting the heart and blood vessels of the human body and is one of the leading causes of death worldwide. Current therapy for CVD is limited to the treatment of already established disease, and it includes pharmacological and/or surgical procedures, such as percutaneous coronary intervention with stenting and coronary artery bypass grafting. However, lots of complications have been raised with these modalities of treatment, including systemic toxicity with medication, stent thrombosis with percutaneous coronary intervention and nonsurgical candidate patients for coronary artery bypass grafting. Nanomedicine has emerged as a potential strategy in dealing with these obstacles. Applications of nanotechnology in medicine are already underway and offer tremendous promise. This review explores the recent developments of nanotechnology in the field of CVD and gives an insight into its potential for diagnostics and therapeutics applications. The authors also explore the characteristics of the widely used biocompatible nanomaterials for this purpose and evaluate their opportunities and challenges for developing novel nanobiotechnological tools with high efficacy for biomedical applications, such as radiological imaging, vascular implants, gene therapy, myocardial infarction and targeted delivery systems.

Injectable chitosan hyaluronic acid hydrogels for cartilage tissue engineering

Injectable cartilaginous constructs that can form gels in tissue defects have many advantages in tissue engineering applications. In this study we created an injectable hydrogel consisting of methacrylated glycol chitosan (MeGC) and hyaluronic acid (HA) by photocrosslinking with a riboflavin photoinitiator under visible light. A minimum irradiation time of 40s was required to produce stable gels for cell encapsulation with 87-90% encapsulated chondrocyte viability. Although increasing the irradiation time from 40 to 600 s significantly enhanced the compressive modulus of the hydrogels up to 11 or 17 kPa for MeGC or MeGC/HA, respectively, these conditions reduced the encapsulated cell viability to 60-65%. The majority of chondrocytes encapsulated in MeGC hydrogels after 300 s irradiation maintained a rounded shape with a high cell viability of ~80-87% over a 21 day culture period. The incorporation of HA in MeGC hydrogels increased the proliferation and deposition of cartilaginous extracellular matrix by encapsulated chondrocytes. These findings demonstrate that MeGC/HA composite hydrogels have the potential for cartilage repair.

Enzymatic degradation of thiolated chitosan

The objective of this study was to evaluate the biodegradability of thiolated chitosans in comparison to unmodified chitosan. Mediated by carbodiimide, thioglycolic acid (TGA) and mercaptonicotinic acid (MNA) were covalently attached to chitosan via formation an amide bond. Applying two different concentrations of carbodiimide 50 and 100 mM, two chitosan TGA conjugates (TGA A and TGA B) were obtained. According to chitosan solution (3% m/v) thiomer solutions were prepared and chitosanolytic enzyme solutions were added. Lysozyme, pectinase and cellulase were examined in chitosan degrading activity. The enzymatic degradability of these thiomers was investigated by viscosity measurements with a plate-plate viscometer. The obtained chitosan TGA conjugate A displayed 267.7 µmol and conjugate B displayed 116.3 µmol of immobilized thiol groups. With 325.4 µmol immobilized thiol groups, chitosan MNA conjugate displayed the most content of thiol groups. In rheological studies subsequently the modification proved that chitosan TGA conjugates with a higher coupling rate of thiol groups were not only degraded to a lesser extent by 20.9-26.4% but also more slowly. Chitosan mercaptonicotinic acid was degraded by 31.4-50.1% depending the investigated enzyme and even faster than unmodified chitosan. According to these results the biodegradability can be influenced by various modifications of the polymer which showed in particular that the rate of biodegradation is increased when MNA is the ligand, whereas the degradation is hampered when TGA is used as ligand for chitosan.

Blood compatibility of polymers derived from natural materials

Several polymers derived from natural materials are effective for tissue engineering or drug delivery applications, due to specific properties, such as biocompatibility, biodegradability, and structural activity. Their blood compatibility needs to be carefully evaluated to avoid thrombosis and other material-related adverse events in the hematic environment. We compared the surface properties and blood compatibility of protein and polysaccharide polymers, including fibroin, gelatin, and chitosan. Both fibroin and chitosan showed good hemocompatibility, with low platelet adhesion and spreading. Chitosan induced strong interactions with plasma proteins, especially with albumin. It was hypothesized that surface passivation by albumin inhibited the adsorption of other procoagulant and proadhesive proteins on chitosan and fibroin films, which limited platelet spreading. However, the significant and rapid polymer swelling encouraged protein entrapment within the soft, gelatin films, inducing higher platelet adhesion and activation. Thrombin generation assay confirmed the higher blood compatibility of chitosan and fibroin with regard to clotting.

Visible light crosslinkable chitosan hydrogels for tissue engineering

In situ gelling constructs, which form a hydrogel at the site of injection, offer the advantage of delivering cells and growth factors to the complex structure of the defect area for tissue engineering. In the present study, visible light crosslinkable hydrogel systems were presented using methacrylated glycol chitosan (MeGC) and three blue light initiators: camphorquinone (CQ), fluorescein (FR) and riboflavin (RF). A minimal irradiation time of 120 s was required to produce MeGC gels able to encapsulate cells with CQ or FR. Although prolonged irradiation up to 600 s improved the mechanical strength of CQ- or FR-initiated gels (compressive modulus 2.8 or 4.4 kPa, respectively), these conditions drastically reduced encapsulated chondrocyte viability to 5% and 25% for CQ and FR, respectively. Stable gels with 80-90% cell viability could be constructed using radiofrequency (RF) with only 40s irradiation time. Increasing irradiation time up to 300s significantly improved the compressive modulus of the RF-initiated MeGC gels up to 8.5 kPa without reducing cell viability. The swelling ratio and degradation rate were smaller at higher irradiation time. RF-photoinitiated hydrogels supported proliferation of encapsulated chondrocytes and extracellular matrix deposition. The feasibility of this photoinitiating system as in situ gelling hydrogels was further demonstrated in osteochondral and chondral defect models for potential cartilage tissue engineering. The MeGC hydrogels using RF offer a promising photoinitiating system in tissue engineering applications.

Electrospinning of hexanoyl chitosan/polylactide blends

The electrospinning of hexanoyl chitosan (H-chitosan), polylactide (PLA) and their blends was performed using chloroform, dichloromethane or tetrahydrofuran as a spinning solvent. The as-spun PLA fibers appeared to be cross-sectionally round, with rough surface morphology, while the as-spun H-chitosan fibers were flat with smooth surface morphology. Electrospinning of the H-chitosan/PLA blend solutions in chloroform with the H-chitosan solution content of less than or equal to 50% (w/w) produced continuous fibers without the presence of beads, while that of the blend solutions in dichloromethane produced beaded fibers or even just beads at high H-chitosan solution contents. The size of the as-spun fibers from blend solutions with a H-chitosan solution content of less than or equal to 50% (w/w) was found to decrease with increasing the H-chitosan solution content. Thermal characteristics and crystalline structure of selected as-spun fibers from pure and blend solutions in chloroform were characterized by thermogravimetric analysis, differential scanning calorimetry and wide-angle X-ray diffraction (WAXD) techniques.

Rationally designed oxaliplatin-nanoparticle for enhanced antitumor efficacy

Nanoscale drug delivery vehicles have been extensively studied as carriers for cancer chemotherapeutics. However, the formulation of platinum chemotherapeutics in nanoparticles has been a challenge arising from their physicochemical properties. There are only a few reports describing oxaliplatin nanoparticles. In this study, we derivatized the monomeric units of a polyisobutylene maleic acid copolymer with glucosamine, which chelates trans-1,2-diaminocyclohexane (DACH) platinum (II) through a novel monocarboxylato and O --> Pt coordination linkage. At a specific polymer to platinum ratio, the complex self-assembled into a nanoparticle, where the polymeric units act as the leaving group, releasing DACH-platinum in a sustained pH-dependent manner. Sizing was done using dynamic light scatter and electron microscopy. The nanoparticles were evaluated for efficacy in vitro and in vivo. Biodistribution was quantified using inductively coupled plasma atomic absorption spectroscopy (ICP-AAS). The PIMA-GA-DACH-platinum nanoparticle was found to be more active than free oxaliplatin in vitro. In vivo, the nanoparticles resulted in greater tumor inhibition than oxaliplatin (equivalent to 5 mg kg⁻¹ platinum dose) with minimal nephrotoxicity or body weight loss. ICP-AAS revealed significant preferential tumor accumulation of platinum with reduced biodistribution to the kidney or liver following PIMA-GA-DACH-platinum nanoparticle administration as compared with free oxaliplatin. These results indicate that the rational engineering of a novel polymeric nanoparticle inspired by the bioactivation of oxaliplatin results in increased antitumor potency with reduced systemic toxicity compared with the parent cytotoxic. Rational design can emerge as an exciting strategy in the synthesis of nanomedicines for cancer chemotherapy.

Preparation and physical properties of chitosan benzoic acid derivatives using a phosphoryl mixed anhydride system

Direct benzoylation of the two hydroxyl groups on chitosan was achieved using a phosphoryl mixed anhydride system, derived from trifluoroacetic anhydride (TFAA), benzoic acids (BAs), and phosphoric acid (PA). The reaction is operated as a one pot process under mild conditions that does not require neither an inert atmosphere nor dry solvents. The structures of the synthesized compounds were confirmed by NMR and IR spectroscopy. Solubility tests on the products revealed that they were soluble in organic solvents such as N,N-dimethylformamide (DMF), dimethylsulfoxide (DMSO), and acetone. In the meantime, a morphological study by scanning electron microscopy (SEM) evidently indicated that the chitosan benzoates underwent significant structural changes after the benzoylation.