In vitro antibacterial activity of porous TiO2-Ag composite layers against methicillin-resistant Staphylococcus aureus

Additional effects of silver nanoparticles on bactericidal efficiency depend on calcination temperature and dip-coating speed

There is an increasing interest in the application of photocatalytic properties for disinfection of surfaces, air, and water. Titanium dioxide is widely used as a photocatalyst, and the addition of silver reportedly enhances its bactericidal action. However, the synergy of silver nanoparticles and TiO(2) is not well understood. The photocatalytic elimination of Bacillus atrophaeus was examined under different calcination temperatures, dip-coating speeds, and ratios of TiO(2), SiO(2), and Ag to identify optimal production conditions for the production of TiO(2)- and/or TiO(2)/Ag-coated glass for surface disinfection. Photocatalytic disinfection of pure TiO(2) or TiO(2) plus Ag nanoparticles was dependent primarily on the calcination temperature. The antibacterial activity of TiO(2) films was optimal with a high dip-coating speed and high calcination temperature (600°C). Maximal bacterial inactivation using TiO(2)/Ag-coated glass was also observed following high-speed dip coating but with a low calcination temperature (250°C). Scanning electron microscopy (SEM) showed that the Ag nanoparticles combined together at a high calcination temperature, leading to decreased antibacterial activity of TiO(2)/Ag films due to a smaller surface area of Ag nanoparticles. The presence of Ag enhanced the photocatalytic inactivation rate of TiO(2), producing a more pronounced effect with increasing levels of catalyst loading.

An electron microscopical study on the growth of TiO2-Ag antibacterial coatings on Ti6Al7Nb biomedical alloy

This research was aimed at investigating the growth mechanism of TiO(2)-Ag antibacterial coatings during plasma electrolytic oxidation (PEO) of Ti6Al7Nb biomedical alloy in an electrolyte based on calcium acetate/calcium glycerophosphate bearing Ag nanoparticles. The focus was on the mechanism of incorporation of Ag nanoparticles, their distribution and chemical composition within the porous coatings using high resolution transmission electron microscopy (HRTEM) and scanning electron microscopy (SEM) imaging techniques combined with energy dispersive X-ray spectroscopy (EDX) for chemical analyses. The PEO coatings were grown using different oxidation times, 10, 30, 60, 90, 120, 180, 240 and 300 s. The electron microscopy results confirmed the formation of a porous coating with incorporated Ag nanoparticles from the initial stages of oxidation (i.e. 10 s), with further Ag incorporation as the PEO process was continued for longer durations. The Ag nanoparticles were embedded in the dense oxide layer, fused into the pore walls and on the surface of the coatings without any change in their morphology or chemistry as detected by HRTEM, SEM and EDX. Ag seems to be delivered to the sites of coating growth (where dielectric breakdown occurs) through different transport pathways, i.e. open pores, cracks and short-circuit channels.

Antibacterial nano-structured titania coating incorporated with silver nanoparticles

Titanium (Ti) implants are widely used clinically but post-operation infection remains one of the most common and serious complications. A surface boasting long-term antibacterial ability is highly desirable in order to prevent implant associated infection. In this study, titania nanotubes (TiO(2)-NTs) incorporated with silver (Ag) nanoparticles are fabricated on Ti implants to achieve this purpose. The Ag nanoparticles adhere tightly to the wall of the TiO(2)-NTs prepared by immersion in a silver nitrate solution followed by ultraviolet light radiation. The amount of Ag introduced to the NTs can be varied by changing processing parameters such as the AgNO(3) concentration and immersion time. The TiO(2)-NTs loaded with Ag nanoparticles (NT-Ag) can kill all the planktonic bacteria in the suspension during the first several days, and the ability of the NT-Ag to prevent bacterial adhesion is maintained without obvious decline for 30 days, which are normally long enough to prevent post-operation infection in the early and intermediate stages and perhaps even late infection around the implant. Although the NT-Ag structure shows some cytotoxicity, it can be reduced by controlling the Ag release rate. The NT-Ag materials are also expected to possess satisfactory osteoconductivity in addition to the good biological performance expected of TiO(2)-NTs. This controllable NT-Ag structure which provides relatively long-term antibacterial ability and good tissue integration has promising applications in orthopedics, dentistry, and other biomedical devices.

Bioactive coating of titanium surfaces with recombinant human β-defensin-2 (rHuβD2) may prevent bacterial colonization in orthopaedic surgery

BACKGROUND

A promising strategy to prevent infections around orthopaedic titanium implants is to use naturally occurring cationic antimicrobial peptides (CAMPs) such as the human β-defensin-2 as antibacterial coatings. Human antimicrobial peptides represent a part of the innate immune system and have a broad antimicrobial spectrum against bacteria, fungi, and viruses.

METHODS

In the present study, titanium surfaces were functionalized by four different self-assembled monolayers (SAMs) forming methoxy silanes: (1) hexadecyltrimethoxysilane, (2) dimethoxymethyloctylsilane, (3) allyltrimethylsilane, and (4) 3-aminopropyltrimethoxysilane. In addition, calf skin type-I collagen was cross-linked to the SAM surface 3-aminopropyltrimethoxysilane by means of two different treatments: (1) N-hydroxysuccinimide and (2) glutaraldehyde. The functionalized titanium surfaces were coated with recombinant human β-defensin-2 (rHuβD2), an antimicrobial peptide, and were tested for antibacterial activity against Escherichia coli. The release of rHuβD2 was quantified by means of enzyme-linked immunosorbent assay (ELISA).

RESULTS

The coating of functionalized titanium surfaces with rHuβD2 was successful. Recombinant HuβD2 was eluted from the titanium surfaces continuously, yielding antimicrobial activity up to several hours. Antimicrobial activity with a killing rate of 100% was observed for all functionalized titanium surfaces after two hours of incubation. The dimethoxymethyloctylsilane-functionalized titanium surface delivered 0.65 μg of rHuβD2 after six hours with a 60% bacterial killing rate. The silane-functionalized surfaces exhibited a faster release of antimicrobially active rHuβD2 compared with collagen modifications.

CONCLUSIONS

Natural antibiotics such as rHuβD2 integrated into the metal surface of titanium implants may be a promising tool to prevent and control infections around orthopaedic implants.

Silver nanoparticles: synthesis through chemical methods in solution and biomedical applications

Chemical methods provide an easy way to synthesize silver nanoparticles (Ag NPs) in solution. These metal nanoparticles have a great potential for biomedical applications as an antibacterial, antifungal, and antiviral agent or in wound healing. The adjustment of the parameters involved in these reactions permits a precise control over the size, shape, monodispersity, and the surfaces of the nanoparticles. These nanoparticles are being used in the design of new hybrid organic-inorganic or inorganic nanomaterials for biomedical applications.

Preparation of silver nanoparticles with antimicrobial activities and the researches of their biocompatibilities

Silver nanoparticles were prepared by chemical reduction method using chitosan as stabilizer and ascorbic acid as reducing agent in this work. The silver/chitosan nanocomposites were characterized in terms of their particle sizes and morphology by using UV spectrophotometer, nano-grainsize analyzer, and transmission electron microscopy. Antibacterial activities of these nanocomposites were carried out for Staphylococcus aureus and Escherichia coli. The silver nanoparticles exhibited significantly inhibition capacity towards these bacteria. Detailed studies on the biocompatibility of the silver/chitosan nanocomposites were investigated by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay and cell adhesion test. The results indicated that these silver/chitosan nanocomposites were benefit for the proliferation and adhesion of L-929 cells, and the biocompatibilities between the nanocomposites and the cells would become better with the culturing days. We anticipated that these silver/chitosan nanocomposites could be a promising candidate as coating material in biomedical engineering and food packing fields wherein antibacterial properties and biocompatibilities are crucial.

Immobilization of silver nanoparticles onto sulfonated polyethersulfone membranes as antibacterial materials

By using the interaction between the sulfonated groups and silver ions, silver nanoparticles were successfully introduced onto the surface of sulfonated polyethersulfone (SPES) membranes by using vitamin C as reducing agent. The presence of silver nanoparticles on the surface of the PES/SPES hybrid membranes was characterized by UV spectrophotometer, scanning electron microscopy and transmission electron microscopy. Detailed studies on the antibacterial activity of the (PES/SPES)-Ag composites were carried out for Staphylococcus aureus, Staphylococcus albus, and Escherichia coli, for which, the composites exhibited significantly inhibition capacity. Cytocompatibility of the (PES/SPES)-Ag composites were also investigated by cell cytotoxicity and cell adhesion tests. The results indicated that after immobilizing with silver nanoparticles, the (PES/SPES)-Ag was still within the safe use range. To our knowledge, this is the first time that PES membranes have been prepared with antibacterial capacity. We anticipate that this novel and green method might lead to an expanded usage of PES with antibacterial properties in medical instruments and food processing industries in the future, and might also make a potential contribution to the fields of antibacterial chemistry.

Functional Coatings or Films for Hard-Tissue Applications

Metallic biomaterials like stainless steel, Co-based alloy, Ti and its alloys are widely used as artificial hip joints, bone plates and dental implants due to their excellent mechanical properties and endurance. However, there are some surface-originated problems associated with the metallic implants: corrosion and wear in biological environments resulting in ions release and formation of wear debris; poor implant fixation resulting from lack of osteoconductivity and osteoinductivity; implant-associated infections due to the bacterial adhesion and colonization at the implantation site. For overcoming these surface-originated problems, a variety of surface modification techniques have been used on metallic implants, including chemical treatments, physical methods and biological methods. This review surveys coatings that serve to provide properties of anti-corrosion and anti-wear, biocompatibility and bioactivity, and antibacterial activity.