101
|
Ergun A, Yu X, Valdevit A, Ritter A, Kalyon DM. In vitro analysis and mechanical properties of twin screw extruded single-layered and coextruded multilayered poly(caprolactone) scaffolds seeded with human fetal osteoblasts for bone tissue engineering. J Biomed Mater Res A 2011; 99:354-66. [PMID: 22021183 DOI: 10.1002/jbm.a.33190] [Citation(s) in RCA: 19] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/17/2010] [Revised: 05/26/2011] [Accepted: 05/31/2011] [Indexed: 01/30/2023]
Abstract
In vitro culturing and mechanical properties of three types of three-dimensional poly(caprolactone) scaffolds with interconnecting open-foam networks are reported. The scaffolds targeted bone tissue regeneration and were fabricated using twin screw extrusion and coextrusion techniques, for continuous mixing/shaping and formation of single or multilayers with distinct and tailorable porosities and pore sizes. Human fetal preosteoblastic cells, hFOB, were cultured on the extruded and coextruded scaffolds under osteogenic supplements and the samples of the resulting tissue constructs were removed and characterized for cell viability and proliferation using the MTS assay, differentiation, and mineralized matrix synthesis via the alkaline phosphatase, ALP, activity and Alizarin Red staining and cell migration using confocal microscopy and scanning electron microscopy. The hFOB cells formed a confluent lining on scaffold surfaces, migrated to the interior and generated abundant extracellular matrix after 2 weeks of culturing, indicative of the promise of such scaffolds for utilization in tissue engineering. The scaffolds and tissue constructs exhibited compressive fatigue behavior that was similar to that of cancellous bone, suggesting the suitability of their use as bone graft substitutes especially for repair of critical-sized defects or nonunion fractures.
Collapse
Affiliation(s)
- Asli Ergun
- Department of Chemical Engineering and Materials Science, Stevens Institute of Technology, Hoboken, New Jersey 07030, USA
| | | | | | | | | |
Collapse
|
102
|
Influence of gaseous ozone in peri-implantitis: bactericidal efficacy and cellular response. An in vitro study using titanium and zirconia. Clin Oral Investig 2011; 16:1049-59. [DOI: 10.1007/s00784-011-0603-2] [Citation(s) in RCA: 24] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/02/2011] [Accepted: 08/03/2011] [Indexed: 10/17/2022]
|
103
|
Pulletikurthi C, Munroe N, Gill P, Pandya S, Persaud D, Haider W, Iyer K, McGoron A. Cytotoxicity of Ni from Surface-Treated Porous Nitinol (PNT) on Osteoblast Cells. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE 2011; 20:824-829. [PMID: 21666866 PMCID: PMC3109905 DOI: 10.1007/s11665-011-9930-3] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/30/2023]
Abstract
The leaching of nickel from the surface of porous Nitinol (PNT) is mainly dependent on its surface characteristics, which can be controlled by appropriate surface treatments. In this investigation, PNT was subjected to two surface treatments, namely, water-boiling and dry-heating passivations. Phosphate buffer saline (PBS) solutions obtained from cyclic potentiodynamic polarization tests on PNT were employed to assess the cytotoxicity of Ni contained therein on osteoblast cells by Sulforhodamine B (SRB) assay. In addition, similar concentrations of Ni were added exogenously to cell culture media to determine cytotoxic effects on osteoblast cells. The morphologies of the untreated and the surface-treated PNTs were examined using SEM and AFM. Furthermore, growth of human osteoblast cells was observed on the PNT surfaces.
Collapse
|
104
|
Yun HS, Park JW, Kim SH, Kim YJ, Jang JH. Effect of the pore structure of bioactive glass balls on biocompatibility in vitro and in vivo. Acta Biomater 2011; 7:2651-60. [PMID: 21320647 DOI: 10.1016/j.actbio.2011.02.014] [Citation(s) in RCA: 60] [Impact Index Per Article: 4.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/29/2010] [Revised: 01/25/2011] [Accepted: 02/07/2011] [Indexed: 11/25/2022]
Abstract
We prepared porous bioactive glass (BG) balls with various pore architectures using a modified version of a polymer templating technique which is generally used for the synthesis of mesoporous BG. Sol-gel derived porous BG is an excellent candidate as a graft material for bone tissue regeneration due to its good bone forming bioactivity and biodegradability. The biodegradability is largely related to the pore architecture and affects its biocompatibility. The pore architecture of the BG balls was controllable by changing the reaction time in chloroform. The relationship between the pore architecture of the BG balls and biocompatibility were studied using MC3T3-E1 pre-osteoblast cells in vitro and the rabbit calvarial model in vivo 8 weeks after implantation. The mesoporous BG balls (BG0) and porous BG beads with a hierarchical pore structure on the nano- to microscale (BG0.5 and BG2) showed a good cell proliferation response and differentiation behavior in vitro and in vivo without serious toxicity. These hierarchically porous structures also enhanced osteoconductivity. However, the existence of too many microscale pores in the BG balls (BG24) led to their rapid biodegradation and, consequently, to serious negative effects in vitro and in vivo. The pore architecture of the BG balls greatly influenced their biocompatibility, as well as bone formation, and should be carefully controlled when designing new materials for use in bioapplications. The porous BG balls with hierarchical pores on the nano- to microscale exhibit favorable biocompatibility in vitro and promise excellent potential applications in the field of biomaterials, such as tissue regeneration and drug storage.
Collapse
|
105
|
Brydone AS, Meek D, Maclaine S. Bone grafting, orthopaedic biomaterials, and the clinical need for bone engineering. Proc Inst Mech Eng H 2011; 224:1329-43. [PMID: 21287823 DOI: 10.1243/09544119jeim770] [Citation(s) in RCA: 211] [Impact Index Per Article: 16.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/18/2022]
Abstract
As the population ages, the number of operations performed on bone is expected to increase. Diseases such as arthritis, tumours, and trauma can lead to defects in the skeleton requiring an operation to replace or restore the lost bone. Surgeons can use autografts, allografts, and/or bone graft substitutes to restore areas of bone loss. Surgical implants are also used in addition or in isolation to replace the diseased bone. This review considers the application of available bone grafts in different clinical settings. It also discusses recently introduced bioactive biomaterials and highlights the clinical difficulties and technological deficiencies that exist in our current surgical practice.
Collapse
Affiliation(s)
- A S Brydone
- Southern General Hospital, 1345 Govan Road, Glasgow G51 4TF, UK
| | | | | |
Collapse
|
106
|
Osathanon T, Bespinyowong K, Arksornnukit M, Takahashi H, Pavasant P. Human osteoblast-like cell spreading and proliferation on Ti-6Al-7Nb surfaces of varying roughness. J Oral Sci 2011; 53:23-30. [DOI: 10.2334/josnusd.53.23] [Citation(s) in RCA: 47] [Impact Index Per Article: 3.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/01/2022]
|
107
|
Anselme K, Ponche A, Bigerelle M. Relative influence of surface topography and surface chemistry on cell response to bone implant materials. Part 2: Biological aspects. Proc Inst Mech Eng H 2010; 224:1487-507. [DOI: 10.1243/09544119jeim901] [Citation(s) in RCA: 160] [Impact Index Per Article: 11.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/13/2022]
Abstract
A current medical challenge is the replacement of tissue which can be thought of in terms of bone tissue engineering approaches. The key problem in bone tissue engineering lies in associating bone stem cells with material supports or scaffolds that can be implanted in a patient. Beside bone tissue engineering approaches, these types of materials are used daily in orthopaedics and dental practice as permanent or transitory implants such as ceramic bone filling materials or metallic prostheses. Consequently, it is essential to better understand how bone cells interact with materials. For several years, the current authors and others have developed in vitro studies in order to elucidate the mechanisms underlying the response of human bone cells to implant surfaces. This paper reviews the current state of knowledge and proposes future directions for research in this domain.
Collapse
Affiliation(s)
- K Anselme
- Institut de Sciences des Matériaux de Mulhouse (IS2M), CNRS LRC7228, Université de Haute-Alsace, Mulhouse, France
| | - A Ponche
- Institut de Sciences des Matériaux de Mulhouse (IS2M), CNRS LRC7228, Université de Haute-Alsace, Mulhouse, France
| | - M Bigerelle
- Laboratoire Roberval, CNRS UMR6253, Centre de Recherche de Royallieu, Université de Technologie de Compiègne, Compiègne, France
| |
Collapse
|
108
|
Durual S, Pernet F, Rieder P, Mekki M, Cattani-Lorente M, Wiskott HWA. Titanium nitride oxide coating on rough titanium stimulates the proliferation of human primary osteoblasts. Clin Oral Implants Res 2010; 22:552-9. [PMID: 21087318 DOI: 10.1111/j.1600-0501.2010.02033.x] [Citation(s) in RCA: 21] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Abstract
OBJECTIVES Titanium is widely used in contemporary endosseous implantology and there is considerable thrust to further promote osseointegration by implant surface modifications. The aim of this study was to evaluate the effect of a titanium-nitride-oxide (TiNOx) coating on commercially pure microroughened titanium by assessing the proliferation and differentiation of human primary osteoblasts. MATERIALS AND METHODS Cell proliferation, gene expression, alkaline phosphatase activity, osteoprotegerin and osteocalcin secretion were analyzed for a time course of 3 weeks, with or without additional stimulation by 1.25(OH)(2) vitamin D(3) 100 nM. RESULTS A 1.5-fold increase in the proliferation rate of cells grown on TiNOx-coated titanium as compared with uncoated surfaces was observed. SEM views indicated that the cells' normal morphology with their numerous extensions was maintained. The differentiation process on the TiNOx surface was only affected to a minor degree and translated into a slight delay in osteoblast maturation when compared to uncoated titanium. CONCLUSION Pending confirmation of these results in vivo, TiNOx coatings could potentially accelerate and enhance osseointegration.
Collapse
Affiliation(s)
- S Durual
- Laboratory of Biomaterials, University of Geneva, Switzerland.
| | | | | | | | | | | |
Collapse
|
109
|
Okuda Y, Noda M, Kono H, Miyamoto M, Sato H, Ban S. Radio-opacity of core materials for all-ceramic restorations. Dent Mater J 2010; 29:35-40. [PMID: 20379010 DOI: 10.4012/dmj.2009-54] [Citation(s) in RCA: 20] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
Abstract
The aim of this study was to investigate and compare the radio-opacity of core materials for all-ceramic restorations, such as zirconia (NANOZR and Y-TZP) and alumina, against commercially pure titanium (cpTi) and aluminum. X-ray images were taken under general settings using an X-ray film. The X-ray film images were scanned using a digital scanner, and the darkness at the central area of each specimen image was quantitatively analyzed using an image analysis software. Amongst the materials investigated, alumina showed the most transparency against X-rays. Conversely, both types of zirconia showed the highest radio-opacity, whereby that of NANOZR was slightly lower than that of Y-TZP. This was because NANOZR contained 30 vol% of alumina and its density was also slightly lower than that of Y-TZP.
Collapse
Affiliation(s)
- Yuji Okuda
- Department of Biomaterials Science, Graduate School of Medical and Dental Sciences, Kagoshima University, Kagoshima 890-8544, Japan.
| | | | | | | | | | | |
Collapse
|
110
|
Bello SA, de Jesús-Maldonado I, Rosim-Fachini E, Sundaram PA, Diffoot-Carlo N. In vitro evaluation of human osteoblast adhesion to a thermally oxidized gamma-TiAl intermetallic alloy of composition Ti-48Al-2Cr-2Nb (at.%). JOURNAL OF MATERIALS SCIENCE. MATERIALS IN MEDICINE 2010; 21:1739-1750. [PMID: 20162332 PMCID: PMC2871339 DOI: 10.1007/s10856-010-4016-6] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/16/2009] [Accepted: 01/28/2010] [Indexed: 05/28/2023]
Abstract
Ti-48Al-2Cr-2Nb (at.%) (gamma-TiAl), a gamma titanium aluminide alloy originally designed for aerospace applications, appears to have excellent potential as implant material. Thermal treatment of gamma-TiAl renders this alloy extremely corrosion resistant in vitro, which could improve its biocompatibility. In this study, the surface oxides produced by thermal oxidation (at 500 degrees C, and at 800 degrees C for 1 h in air) on gamma-TiAl were characterized by X-ray photoelectron spectroscopy (XPS). hFOB 1.19 cell adhesion on thermally oxidized gamma-TiAl was examined in vitro by a hexosaminidase assay, scanning electron microscopy (SEM) and confocal laser scanning microscopy (CLSM) after 1, 7 and 14 days. Ti-6Al-4V surfaces were used for comparison. Hexosaminidase assay data and CLSM analysis of focal contacts and cytoskeleton organization showed no differences in cell attachment on autoclaved and both heat-treated gamma-TiAl surfaces at the different time points. SEM images showed well organized multi-layers of differentiated cells adhered on thermally oxidized gamma-TiAl surfaces at day 14. Unexpectedly, thermally oxidized Ti-6Al-4V surfaces oxidized at 800 degrees C exhibited cytotoxic effects on hFOB 1.19 cells. Our results indicate that thermal oxidation of gamma-TiAl seems to be a promising method to generate highly corrosion resistant and biocompatible surfaces for implant applications.
Collapse
Affiliation(s)
- Samir A Bello
- Department of Biology, University of Puerto Rico, Call Box 9000, Mayagüez Campus, Mayagüez, PR 00681-9000, USA
| | | | | | | | | |
Collapse
|
111
|
Keogh MB, O' Brien FJ, Daly JS. A novel collagen scaffold supports human osteogenesis--applications for bone tissue engineering. Cell Tissue Res 2010; 340:169-77. [PMID: 20198386 DOI: 10.1007/s00441-010-0939-y] [Citation(s) in RCA: 67] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/15/2009] [Accepted: 01/27/2010] [Indexed: 11/30/2022]
Abstract
Collagen glycosaminoglycan (CG) scaffolds have been clinically approved as an application for skin regeneration. The goal of this study has been to examine whether a CG scaffold is a suitable biomaterial for generating human bone tissue. Specifically, we have asked the following questions: (1) can the scaffold support human osteoblast growth and differentiation and (2) how might recombinant human transforming growth factor-beta (TGF-beta(1)) enhance long-term in vitro bone formation? We show human osteoblast attachment, infiltration and uniform distribution throughout the construct, reaching the centre within 14 days of seeding. We have identified the fully differentiated osteoblast phenotype categorised by the temporal expression of alkaline phosphatase, collagen type 1, osteonectin, bone sialo protein, biglycan and osteocalcin. Mineralised bone formation has been identified at 35 days post-seeding by using von Kossa and Alizarin S Red staining. Both gene expression and mineral staining suggest the benefit of introducing an initial high treatment of TGF-beta(1) (10 ng/ml) followed by a low continuous treatment (0.2 ng/ml) to enhance human osteogenesis on the scaffold. Osteogenesis coincides with a reduction in scaffold size and shape (up to 70% that of original). A notable finding is core degradation at the centre of the tissue-engineered construct after 49 days of culture. This is not observed at earlier time points. Therefore, a maximum of 35 days in culture is appropriate for in vitro studies of these scaffolds. We conclude that the CG scaffold shows excellent potential as a biomaterial for human bone tissue engineering.
Collapse
Affiliation(s)
- Michael B Keogh
- Division of Biology, Royal College of Surgeons in Ireland, 123 St. Stephen's Green, Dublin 2, Ireland.
| | | | | |
Collapse
|
112
|
Omar O, Lennerås M, Svensson S, Suska F, Emanuelsson L, Hall J, Nannmark U, Thomsen P. Integrin and chemokine receptor gene expression in implant-adherent cells during early osseointegration. JOURNAL OF MATERIALS SCIENCE. MATERIALS IN MEDICINE 2010; 21:969-80. [PMID: 19856201 DOI: 10.1007/s10856-009-3915-x] [Citation(s) in RCA: 64] [Impact Index Per Article: 4.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/30/2009] [Accepted: 10/13/2009] [Indexed: 05/21/2023]
Abstract
The mechanisms of early cellular recruitment and interaction to titanium implants are not well understood. The aim of this study was to investigate the expression of pro-inflammatory cytokines, chemokines and adhesion markers during the first 24 h of implantation. Anodically oxidized and machined titanium implants were inserted in rat tibia. After 3, 12, and 24 h the implants were unscrewed and analyzed with quantitative polymerase chain reaction. Immunohistochemistry and scanning electron microscopy revealed different cell types, morphology and adhesion at the two implant surfaces. A greater amount of cells, as indicated by higher expression of small subunit ribosomal RNA (18S), was detected on the oxidized surface. Higher expression of CXC chemokine receptor-4 (at 12 h) and integrins, alphav (at 12 h), beta1 (at 24 h) and beta2 (at 12 and 24 h) was detected at the oxidized surfaces. Significantly higher tumor necrosis factor-alpha (at 3 h) and interleukin-1beta (at 24 h) expression was demonstrated for the machined surface. It is concluded that material surface properties rapidly modulate the expression of receptors important for the recruitment and adhesion of cells which are crucial for the inflammatory and regenerative processes at implant surfaces in vivo.
Collapse
Affiliation(s)
- Omar Omar
- Department of Biomaterials, Sahlgrenska Academy at University of Gothenburg, Göteborg, Sweden.
| | | | | | | | | | | | | | | |
Collapse
|
113
|
The performance of bone marrow mesenchymal stem cell--implant complexes prepared by cell sheet engineering techniques. Biomaterials 2010; 31:3212-21. [PMID: 20132981 DOI: 10.1016/j.biomaterials.2010.01.036] [Citation(s) in RCA: 43] [Impact Index Per Article: 3.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/22/2009] [Accepted: 01/09/2010] [Indexed: 11/22/2022]
Abstract
This study investigated the hypothesis that cell sheets composed of multilayered rabbit bone marrow derived mesenchymal stem cells (MSC) could be assembled with two kinds of implants (surface-modified titanium and zirconia) for the construction of a MSC-implant. The MSC sheets were harvested from culture flasks, wrapped around implants to construct the complexes, and then cultured in osteogenic medium. The layered cell sheets integrated well with implants and remained viable, with small mineralized nodules visible on the implant surfaces for up to four weeks after culture. Cells on the implants underwent classical in vitro osteogenic differentiation with an associated elevation of alkaline phosphatase activity and bone- and vascular-related protein expression. In vivo, two kinds of cell sheet-implant complexes were transplanted under the skin of SCID mice and cultured for eight weeks. For the MSC sheet titanium implant complex, histological examination revealed that new bone tissue that formed around implants followed a predominantly endochondral pathway, exhibiting histological markers of native bone; for the MSC sheet zirconia implant complex, however, intramembranous ossification appeared to occur on the surface of the zirconia implant, as observed with typical osteocytes embedded in dense matrix and accompanied by both microvessels and marrow cavities. These findings demonstrate that MSC-implants possessing osteogenic and vascularization abilities can be produced using cell sheet engineering techniques in conjunction with routine implant materials, which provide a novel technology to modify the implant surface.
Collapse
|
114
|
Oya K, Tanaka Y, Moriyama Y, Yoshioka Y, Kimura T, Tsutsumi Y, Doi H, Nomura N, Noda K, Kishida A, Hanawa T. Differences in the bone differentiation properties of MC3T3-E1 cells on polished bulk and sputter-deposited titanium specimens. J Biomed Mater Res A 2010; 94:611-8. [DOI: 10.1002/jbm.a.32751] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022]
|