Development of CMC hydrogels loaded with silver nano-particles for medical applications

In vitro evaluation of mucoadhesive and self-disinfection efficiency of (acrylic acid/polyethylene glycol)-silver nanocomposites for buccal drug delivery

A mucoadhesive drug delivery system can improve the effectiveness of a drug, allowing targeting and localization at a specific site. According to this assumption, γ-irradiation as eco-friendly technique was employed to synthesize (acrylic acid/polyethylene glycol) copolymer hydrogel of different compositions. Silver nanoparticles were prepared within (acrylic acid/polyethylene glycol) hydrogel network by means of in situ reduction of silver nitrate using sodium borohydride as a reducing agent. Swelling characteristics in distilled water and simulated saliva solution were studied as a function of copolymer composition and preparation irradiation dose. (Acrylic acid/polyethylene glycol) hydrogels and their developed Agº nanocomposites have been characterized using scanning electron microscope, thermogravimetric analysis, transmission electron microscopy, energy dispersive X-ray spectroscopy, and X-ray diffraction. Mucoadhesive strength as well as self-disinfection efficiency expressed as antibacterial activity against different bacterial strains was evaluated. Propranolol HCl as model drug was used to evaluate the potential efficiency of the obtained (acrylic acid/polyethylene glycol)-Agº nanocomposites as mucoadhesive drug carrier. The obtained results showed that the (acrylic acid/polyethylene glycol)-Agº nanocomposites show a promising self-disinfection property, and the propranolol HCl–loaded composites were able to deliver the loaded drug in a sustainable manner that lasts for about 600 min.

The impact of anticancer activity upon Beta vulgaris extract mediated biosynthesized silver nanoparticles (ag-NPs) against human breast (MCF-7), lung (A549) and pharynx (Hep-2) cancer cell lines

The present study tried for a phyto-synthetic method of producing silver nanoparticles (Ag-NPs) with size controlled as and eco-friendly route that can lead to their advanced production with decorative tranquil morphology. By inducing temperature fluctuation of the reaction mixture from 25 to 80°C the plasmon resonance band raised slowly which had an ultimate effect on size and shape of Ag-NPs as shown by UV-visible spectroscopy and TEM results. The biosynthesized nanoparticles showed good cytotoxic impact against MCF-7, A549 and Hep2 cells compared to normal cell lines. Compared to control plates, the percentage of cell growth inhibition was found to be high with as concentrations of Ag-NPs becomes more as determined by MTT assay. The AO/EtBr staining observations demonstrated that the mechanism of cell death induced by Ag-NPs was due to apoptosis in cancer cells. These present results propose that the silver nanoparticles (Ag-NPs) may be utilized as anticancer agents for the treatment of various cancer types. However, there is a need for study of in vivo examination of these nanoparticles to find their role and mechanism inside human body. Further, studies we plan to do biomarker fabrication from the green synthesized plant extract nanoparticles like silver, gold and copper nanoparticles with optimized shape and sizes and their enhancement of these noble nanoparticles.

Synthesis of silver nanoparticles (Ag NPs) for anticancer activities (MCF 7 breast and A549 lung cell lines) of the crude extract of Syzygium aromaticum

In the present report, silver nanoparticles were synthesized using Piper nigrum extract for in vitro cytotoxicity efficacy against MCF-7 and HEP-2 cells. The silver nanoparticles (AgNPs) were formed within 20min and after preliminarily confirmation by UV-Visible spectroscopy (strong peak observed at ~441nm), they were characterized by using FT-IR and HR-TEM. The TEM images show spherical shape of biosynthesized AgNPs with particle size in the range 5-40nm while as compositional analysis were observed by EDAX. MTT assays were carried out for cytotoxicity of various concentrations of biosynthesized silver nanoparticles and Piper nigrum extract ranging from 10 to 100μg. The biosynthesized silver nanoparticles showed a significant anticancer activity against both MCF-7 and Hep-2 cells compared to Piper nigrum extract which was dose dependent. Our study thus revealed an excellent application of greenly synthesized silver nanoparticles using Piper nigrum. The study further suggested the potential therapeutic use of these nanoparticles in cancer study.

Flow and Thixotropic Parameters for Rheological Characterization of Hydrogels

The goal of this paper was to design several sodium carboxymethylcellulose hydrogels containing a BCS class II model drug and to evaluate their flow and thixotropic properties. The rheological measurements were performed at two temperatures (23 °C and 37 °C), using a rotational viscometer. The hydrogels were stirred at different time intervals (10 s, 2, 5, 10 and 20 min at 23 °C, and 10 s, 2 and 5 min at 37 °C), with a maximum rotational speed of 60 rpm, and the corresponding forward and backward rheograms were recorded as shear stress vs. shear rate. For all hydrogels, the rheological data obtained at both temperatures showed a decrease of viscosity with the increase of the shear rate, highlighting a pseudoplastic behaviour. The flow profiles viscosity vs. shear rate were quantified through power law model, meanwhile the flow curves shear stress vs. shear rate were assessed by applying the Herschel-Bulkley model. The thixotropic character was evaluated through different descriptors: thixotropic area, thixotropic index, thixotropic constant and destructuration thixotropic coefficient. The gel-forming polymer concentration and the rheological experiments temperature significantly influence the flow and thixotropic parameters values of the designed hydrogels. The rheological characteristics described have an impact on the drug release microenvironment and determine the stasis time at the application site.

Biopolymers Regulate Silver Nanoparticle under Microwave Irradiation for Effective Antibacterial and Antibiofilm Activities

In the current study, facile synthesis of carboxymethyl cellulose (CMC) and sodium alginate capped silver nanoparticles (AgNPs) was examined using microwave radiation and aniline as a reducing agent. The biopolymer matrix embedded nanoparticles were synthesized under various experimental conditions using different concentrations of biopolymer (0.5, 1, 1.5, 2%), volumes of reducing agent (50, 100, 150 μL), and duration of heat treatment (30 s to 240 s). The synthesized nanoparticles were analyzed by scanning electron microscopy, UV-Vis spectroscopy, X-ray diffraction, and Fourier transform infrared spectroscopy for identification of AgNPs synthesis, crystal nature, shape, size, and type of capping action. In addition, the significant antibacterial efficacy and antibiofilm activity of biopolymer capped AgNPs were demonstrated against different bacterial strains, Staphylococcus aureus MTCC 740 and Escherichia coli MTCC 9492. These results confirmed the potential for production of biopolymer capped AgNPs grown under microwave irradiation, which can be used for industrial and biomedical applications.

In vitro fabrication of dental filling nanopowder by green route and its antibacterial activity against dental pathogens

The aim of this study was to introduce novel Sn, Cu, Hg, and Ag nanopowders (NPs) and a composite nanopowder (NP) synthesized using Salvia miltiorrhiza Bunge (SM) root extract as a reducing and capping agent to improve the antibacterial property of dental filling materials. All of the NPs obtained were characterized using a scanning transmission electron microscope (STEM), and energy dispersive X-ray (EDX) spectrum imaging was performed to map the elemental distributions of the NP composite. Fourier transform infrared (FTIR) spectroscopy was performed to identify the role of various functional groups in all of the obtained NPs and the phyto-compound responsible for the reduction of various metal ions. The X-ray diffraction (XRD) patterns clearly illustrated the crystalline phase of the synthesized NP. The antibacterial properties of the synthesized Sn, Cu, Hg, Ag, composite NP, SM root extract, and commercial amalgam powder were evaluated. The Cu, composite NP, SM root extract and Ag NP displayed excellent antibacterial activity against dental bacteria Streptococcus mutans and Lactobacillus acidophilus. The results of this study require further evaluation for signs of metal toxicity in appropriate animal models. However, the results are encouraging for the application of metal NPs as suitable alternatives for antibiotics and disinfectants, especially in dental filling materials.

Facile strategy for the development of polyglucopyranose–silver hydrogel/films for antimicrobial applications

Development of silver nanoparticles entrapped hydrogels for antimicrobial applications.

A biodegradable, biocompatible transdermal device derived from carboxymethyl cellulose and multi-walled carbon nanotubes for sustained release of diclofenac sodium

A hybrid nanocomposite hydrogel (CMC–MWCNT) has been fabricated using carboxymethyl cellulose (CMC) and acid-functionalized multi-walled carbon nanotubes (MWCNTs) at room temperature for transdermal delivery of diclofenac sodium.

Mechanically strong fully biobased anisotropic cellulose aerogels

A series of mechanically strong and fully biobased carboxymethyl cellulose (CMC)/cellulose nanofibril (CNF) hybrid aerogels were produced via an environmentally friendly unidirectional freeze-drying process.

Removal of heavy metals from aqueous phases using chemically modified waste Lyocell fiber

In this study, an outstanding performance of chemically modified waste Lyocell for heavy metals treatment is reported. The sorbent, which was prepared by a simple and concise method, was able to bind heavy metals such as Pb(II), Cu(II) and Cd(II), with very high efficiencies. The binding mechanisms were studied through adsorption and standard characterization tests such as scanning electron microscopy, energy-dispersive spectroscopy, Fourier transform infrared spectroscopy, and X-ray diffraction analyses. Adsorption kinetics was very fast and attained equilibrium within 5 min in all metals studied. The maximum single metal uptakes were 531.29±0.28 mg/g, 505.64±0.21 mg/g, and 123.08±0.26 mg/g for Pb(II), Cd(II) and Cu(II), respectively. In ternary metal systems, Cu(II) selectivity was observed and the underlying factors were discussed. The sorbent by its nature, could be very effective in treating large volumes of wastewater with the contact of very little amount.

Composites of Polymer Hydrogels and Nanoparticulate Systems for Biomedical and Pharmaceutical Applications

Due to their unique structures and properties, three-dimensional hydrogels and nanostructured particles have been widely studied and shown a very high potential for medical, therapeutic and diagnostic applications. However, hydrogels and nanoparticulate systems have respective disadvantages that limit their widespread applications. Recently, the incorporation of nanostructured fillers into hydrogels has been developed as an innovative means for the creation of novel materials with diverse functionality in order to meet new challenges. In this review, the fundamentals of hydrogels and nanoparticles (NPs) were briefly discussed, and then we comprehensively summarized recent advances in the design, synthesis, functionalization and application of nanocomposite hydrogels with enhanced mechanical, biological and physicochemical properties. Moreover, the current challenges and future opportunities for the use of these promising materials in the biomedical sector, especially the nanocomposite hydrogels produced from hydrogels and polymeric NPs, are discussed.

Green sonochemical synthesis of silver nanoparticles at varying concentrations of κ-carrageenan

A green sonochemical method was developed for preparing silver nanoparticles (Ag-NPs) in different concentrations of kappa carrageenan (κ-carrageenan). The κ-carrageenan was used as a natural eco-friendly stabilizer, and ultrasonic irradiation was used as a green reducing agent. The number of Ag-NPs increased with increasing κ-carrageenan concentrations. Formation of Ag/κ-carrageenan was determined by UV-visible spectroscopy where the surface plasmon absorption maximum was observed at 402 to 420 nm. The X-ray diffraction (XRD) analysis showed that the Ag-NPs are of a face-centered cubic structure. The Fourier transform infrared (FT-IR) spectrum indicated the presence of Ag-NPs in κ-carrageenan. Transmission electron microscopy (TEM) image for the highest concentration of κ-carrageenan showed the distribution of Ag-NPs with an average particle size near to 4.21 nm. Scan electron microscopy (SEM) images illustrated the spherical shape of the Ag-NPs. The use of photo irradiation provides a green and economic feature to this work.

Synthesis of silver nanoparticles on the basis of low and high molar mass exopolysaccharides of Bradyrhizobium japonicum 36 and its antimicrobial activity against some pathogens

Silver nanoparticles (SNPs) were synthesized on the basis of exopolysaccharides (low and high molar mass) of diazotrophic Bradyrhizobium japonicum 36 strain. The synthesis of SNPs was carried out by direct reduction of silver nitrate with ethanol-insoluble (high molar mass, HMW) and ethanol-soluble (low molar mass, LMW) fractions of exopolysaccharides (EPS), produced by diazotrophic strain B. japonicum 36. SNPs were characterized using UV-vis spectroscopy, transmission electron microscopy (TEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). SNPs synthesized on the basis of LMW EPS absorbed radiation in the visible regions of 420 nm, whereas SNPs based on the HMW EPS have a wavelength maximum at 450 nm because of the strong SPR transition. Moreover, the antibacterial and antifungal activities of the SNPs were examined in vitro against Escherichia coli, Staphylococcus aureus, and Candida albicans. SNPs synthesized on the basis of LMW EPS were active than those synthesized on the basis of HMW EPS. Besides, UV-visible spectroscopic evaluation confirmed that SNPs synthesized on the basis of LMW EPS were far more stable than those obtained on the basis of HMW EPS.

Sorptive Removal of Cadmium Ions from Solution Phases Using Textile Fiber Waste Coated with Carboxymethyl Cellulose

This study investigates the possibility of applying textile fiber waste coated with carboxymethyl cellulose (CMC) as a feasible adsorbent for treating toxic heavy metals contained in wastewaters. The soluble CMC was successfully coated on Lyocell fiber and cross-linked with epichlorohydrin to give mechanical and water stability as well as to enhance its metal binding property. In a model wastewater solution, isotherm of cadmium sorption was modeled by the Langmuir isotherm model and predicted uptake exceeded 100 mg/g maximum. The developed sorbent could work effectively at very low concentrations and could be recycled many times. Equilibrium sorption was reached within 10~20 min of contact. The study may open a way to develop heavy metal adsorbents from waste textile, which by itself is inapplicable to sorption processes.

Preparation and characterization of silver nanoparticle loaded amorphous hydrogel of carboxymethylcellulose for infected wounds

There is a growing demand for an appropriate and safe antimicrobial dressing to treat infected deep wounds. An amorphous gel formulation (SNP-CMC), containing silver nanoparticles (SNPs) and carboxymethylcellulose (CMC), was prepared in one step by the reduction of silver nitrate in situ. Spectrophotometric and microscopic analysis revealed that the SNPs were 7-21 nm in diameter. In simulated wound experiments, SNP-CMC gel was found to absorb 80.48 ± 4.69% w/w of saline and donate 17.43 ± 0.76% w/w of moisture within 24h indicating its dual fluid affinity. Cytocompatibility of the gel was assessed by proliferation studies with primary human skin cells. The antimicrobial activity studies showed that SNP-CMC containing 50 ppm of SNPs was effective against the growth of both Gram negative and Gram positive strains including methicillin-resistant Staphylococcus aureus (MRSA). These results indicate that SNP-CMC could be ideal for the treatment of deep infected wounds.

Development and application of a nanocomposite derived from crosslinked HPMC and Au nanoparticles for colon targeted drug delivery

Herein, we report a novel route for the synthesis of poly(acrylamide) (PAAm) crosslinked hydroxypropyl methyl cellulose/Au nanocomposite where chemically crosslinked HPMC (c-HPMC) works as a reducing agent.

Novel nanocomposite hydrogel for wound dressing and other medical applications

Graft copolymerization of DADMAC with a MBA crosslinking agent was achieved on water soluble carboxymethyl cellulose with an APS initiator. A CuO nanocomposite hydrogel was formed in situ on cotton. The synthesis of Ag/CMC-DADMAC hydrogel nanocomposites was also studied.

Synthesis and characterization of antibacterial carboxymethyl cellulose/ZnO nanocomposite hydrogels

In this study, carboxymethyl cellulose/ZnO nanocomposite hydrogels have been synthesized through the in situ formation of ZnO nanoparticles within swollen carboxymethyl cellulose hydrogels. The formation of ZnO nanoparticles in the hydrogels was confirmed using X-ray diffraction, UV-vis spectroscopy and scanning electron microscopy (SEM) studies. SEM micrographs revealed the formation of ZnO nanoparticles with size range of 10-20 nm within the hydrogel matrix. The prepared nanocomposite hydrogels showed a pH and salt sensitive swelling behavior. The ZnO nanocomposite hydrogels have rather higher swelling in different aqueous solutions in comparison with neat hydrogel. The nanocomposite hydrogels demonstrated antibacterial effects against Escherichia coli and Staphylococcus aureus bacteria. The developed carboxymethyl cellulose/ZnO nanocomposite hydrogels can be used effectively for biomedical application.

Biodegradable materials for multilayer transient printed circuit boards

Biodegradable printed circuit boards based on water-soluble materials are demonstrated. These systems can dissolve in water within 10 mins to yield end-products that are environmentally safe. These and related approaches have the potential to reduce hazardous waste streams associated with electronics disposal.

Characterization and properties of carboxymethyl cellulose hydrogels crosslinked by polyethylene glycol

Novel hydrogels were prepared from carboxymethyl cellulose (CMC) sodium salt by crosslinking with polyethylene glycol diglycidyl ether (PEGDE). The detailed structures of the hydrogels were determined via FTIR and solid-state NMR spectroscopic analyses. Increasing the feed ratio of PEGDE to CMC in the reaction mixture led to an increase in the crosslinking degree, which enhanced the physical strength of the hydrogels. The hydrogels exhibited enzyme degradability, and after 3 days of incubation with cellulase, 62-28 wt% of the CMC in the hydrogel was degraded under the conditions employed in this study. In addition, the hydrogels exhibited protein adsorption and release abilities, and the amounts of proteins adsorbed on the hydrogels and the release profile of the proteins depended on the protein sizes and crosslinking degree of the hydrogels. These unique properties might enable the use of CMC-based hydrogels as drug delivery system carriers for protein-based drugs if the biological safety of the hydrogel can be verified.