Metal-organic framework nanosheets: An emerging family of multifunctional 2D materials

Recent development of two-dimensional metal-organic framework derived electrocatalysts for hydrogen and oxygen electrocatalysis

Developing efficient and low-cost electrocatalysts with unique nanostructures is of great significance for improved electrocatalytic reactions, including the hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and oxygen reduction reaction (ORR). Two-dimensional (2D) metal-organic frameworks (MOFs) have attracted recent attention because of their unique dimension-related properties, such as ultrathin thickness, large specific surface area, and abundant accessible active sites that can act as good precursors for the derivation of a variety of nanocomposites as active materials in electrocatalysis and energy-related devices. In this review, we present recent developments in 2D MOF-derived nanomaterials for hydrogen and oxygen reactions in overall water-splitting and rechargeable Zn-air batteries. The advantages of various synthetic strategies are summarized and discussed in detail. Finally, we discuss the main challenges and future perspectives of the development of 2D MOF-derived electrocatalysts.

Hydrophilic/Aerophobic Hydrogen-Evolving Electrode: NiRu-Based Metal-Organic Framework Nanosheets In Situ Grown on Conductive Substrates

Electrocatalytic reduction of water via hydrogen evolution reaction (HER) is considered one of the most ideal avenues to produce high-purity hydrogen (H₂) in large quantities, which always requires active electrocatalysts to overcome the high energy barrier. It is of significance yet challenging to design and construct effective HER electrocatalysts of an acceptable cost. In this study, a highly efficient metal-organic framework (MOF)-based electrochemical HER system based on NiRu-based binary MOF (Ru-doped Ni₂(BDC)₂TED MOF, BDC = 1,4-benzenedicarboxylic acid; TED = triethylenediamine) nanosheets grown on conductive substrates (e.g., Ni foam, carbon cloth) is fabricated by a facile solvothermal method. The resultant NiRu-MOF-based composites possess enhanced electron transport ability and water stability, accompanied by increased electrochemically active areas and hydrophilic/aerophobic properties. With these advantages, the optimized NiRu-MOF nanosheet arrays on Ni foam substrate (NiRu-MOF/NF) with a Ru/Ni molar ratio of 6/94 in the MOF structure could exhibit efficient catalytic performance for HER in alkaline conditions, requiring a small overpotential of 51 mV at -10 mA cm^-2. This study could provide a feasible way for the design and synthesis of two-dimensional (2D) MOF-based materials with controllable interface properties for energy catalysis and beyond.

Novel Two-Dimensional Porous Materials for Electrochemical Energy Storage: A Minireview

Two dimensional (2D) porous materials have great potential in electrochemical energy conversion and storage. Over the past five years, our research group has focused on Simple, Mass, Homogeneous and Repeatable Synthesis of various 2D porous materials and their applications for electrochemical energy storage especially for supercapacitors (SCs). During the experimental process, through precisely controlling the experimental parameters, such as reaction species, molar ratio of different ions, concentration, pH value of reaction solution, heating temperature, and reaction time, we have successfully achieved the control of crystal structure, composition, crystallinity, morphology, and size of these 2D porous materials including transition metal oxides (TMOs), transition metal hydroxides (TMHOs), transition metal oxalates (TMOXs), transition metal coordination complexes (TMCCs) and carbon materials, as well as their derivatives and composites. We have also named some of them with CQU-Chen (CQU is the initialism of Chongqing University, Chen is the last name of Lingyun Chen), such as CQU-Chen-Co-O-1, CQU-Chen-Ni-O-H-1, CQU-Chen-Zn-Co-O-1, CQU-Chen-Zn-Co-O-2, CQU-Chen-OA-Co-2-1, CQU-Chen-Co-OA-1, CQU-Chen-Ni-OA-1, CQU-Chen-Gly-Co-3-1, CQU-Chen-Gly-Ni-2-1, CQU-Chen-Gly-Co-Ni-1, etc. The introduction of 2D porous materials as electrode materials for SCs improves the energy storage performances. These materials provide a large number of active sites for ion adsorption, supply plentiful channels for fast ion transport and boost electrical conductivity and facilitate electron transportation and ion penetration. The unique 2D porous structures review is mainly devoted to the introduction of our contribution in the 2D porous nanostructured materials for SC. Finally, the further directions about the preparation of 2D porous materials and electrochemical energy conversion and storage applications are also included.

Coordination tailoring of water-labile 3D MOFs to fabricate ultrathin 2D MOF nanosheets

A novel coordination tailoring top-down delamination strategy involving the controllable partial disassembly of water-labile 3D MOFs has been explored to fabricate ultrathin 2D MOF nanosheets, and it exhibits many advantages such as green, convenience and high efficiency. Accordingly, 2D ultrathin MOF nanosheets with a two-fold interpenetrated architecture have been rapidly obtained from a 3D pillar-layered MOF, and they show distinguished fluorescence responses to different solvents.

Coordination polymers for n-type thermoelectric applications

Coordination polymers (CPs) are potential thermoelectric (TE) materials to replace the sometimes costly, brittle and toxic heavy metal inorganic TEs for near-ambient-temperature applications. Air-stable and highly conductive p-type thermoelectric CPs are relatively well known, but the their n-type counterparts are only now emerging and both are needed for most practical applications. This perspective reviews recent advances in the development of n-type thermoelectric CPs, particularly the 1D and 2D metal bisdithiolenes, and introduces a relatively new class of guest@metal-organic framework(MOF)-based composites. Low dimensional CPs with reasonable n-type thermoelectric performance are emerging with good charge mobility and air-stability but still relatively low electrical conductivity.

In-plane Assembly of Distinctive 2D MOFs with Optimum Supercapacitive Performance

2D metal organic frameworks (MOFs) with layered structure and much exposed atoms on the surface are expected to be promising electrode materials for hybrid supercapacitors. However, the insulating character strongly hinders their further applications. Herein, we propose a novel MOF//MOF strategy to enhance 2D MOF's conductivity, by which two kinds of 2D MOFs with specific functions are concurrently incorporated into one homogeneous layered MOF with enhanced conductivity and electrochemical performance. The synthesized Ni//Cu MOF shows a triple high capacitance of 1,424 Fg⁻¹ and excellent rate capability compared with the pristine Ni MOF. A hybrid supercapacitor is thereof fabricated, which can provide a maximum energy density of 57 Wh kg⁻¹ and a maximum power density of 48,000 W kg⁻¹. These results not only demonstrate that our strategy can effectively boost the conductivity and redox activity but also pave new routes to synthesize new MOFs for various applications.

•

Two kinds of 2D MOFs are successfully in-plane composited

•

Distinctive MOFs with specific functions are integrated into one homogeneous layered MOF

•

Maximum energy density and power density can reach 57 Wh kg⁻¹ and 48,000 W kg⁻¹

The synthesis of interface-modulated ultrathin Ni(ii) MOF/g-C3N4 heterojunctions as efficient photocatalysts for CO2 reduction

It is highly desirable to improve charge separation and to provide catalytic functions for the efficient photocatalytic CO2 reduction reaction (CO2RR) on g-C3N4 (CN). Here, dimension-matched ultrathin NiMOF/CN heterojunctions have been successfully constructed by the in situ growth of NiMOF nanosheets on hydroxylated and 1,4-aminobenzoic acid (AA) functionalized CN nanosheets, respectively, with ultrasonic assistance. The resultant NiMOF/CN heterojunctions exhibited excellent photocatalytic activities for the CO2RR to produce CO and CH4, especially NiMOF/CN-AA, which had photoactivity 18 times higher than that of bare CN. Based on the surface photovoltage responses, wavelength-dependent photocurrent action spectra, electrochemical impedance spectra, and CO2 electrochemical reduction data, it is clearly confirmed that the exceptional photoactivity mainly resulted from the favorable charge transport properties of ultrathin CN and coupled NiMOF, and from the greatly enhanced charge separation via excited high-level electron transfer from CN to NiMOF in the resultant intimately contacted heterojunction caused by the induction effect of AA, and also from the provided catalytic functionality of the central Ni(ii) for CO2 activation. This work provides a feasible synthetic protocol to fabricate MOF-containing dimension-matched heterojunctions with good charge separation for efficient photocatalysis.

Blending functionalised ligands to form multivariate metal-organic framework nanosheets (MTV-MONs) with tuneable surface chemistry

We report a new approach to tuning the properties of metal-organic framework nanosheets (MONs) by blending functionalised ligands to produce multivariate MONs (MTV-MONs). This approach enabled not only fine tuning of the MONs properties, but also resulted in MTV-MONs that show enhanced performance compared to their single-ligand counterparts. Layered copper paddle-wheel based MOFs were synthesised incorporating two or more 2,5-difunctionalised-benzene-1,4-dicarboxylate (fu-BDC) ligands. Liquid ultrasonic exfoliation resulted in the formation of nanosheets down to monolayer thickness presenting multiple functional moieties. Blending of ligands with relatively hydrophilic (methoxy-propoxy) and hydrophobic (pentoxy) moieties resulted in MTV-MONs that showed enhanced dispersion in both polar and apolar solvents compared to either single-ligand parent MON as well as intermediary binding properties. Blending of different fu-BDC ligands with different length alkoxy chains (methoxy-pentoxy) allowed incorporation of up to five different ligands within a single MTV-MON, including ligands which do not form this structure individually. This study demonstrates the potential of blending multiple ligands within an MTV-MON to enable fine-tuning of their structure and properties but also create new nanosheets which are more than the sum of their parts.

Coordination-Driven Hierarchical Assembly of Hybrid Nanostructures Based on 2D Materials

2D materials have received tremendous scientific and engineering interests due to their remarkable properties and broad-ranging applications such as energy storage and conversion, catalysis, biomedicine, electronics, and so forth. To further enhance their performance and endow them with new functions, 2D materials are proposed to hybridize with other nanostructured building blocks, resulting in hybrid nanostructures with various morphologies and structures. The properties and functions of these hybrid nanostructures depend strongly on the interfacial interactions between 2D materials and other building blocks. Covalent and coordination bonds are two strong interactions that hold high potential in constructing these robust hybrid nanostructures based on 2D materials. However, most 2D materials are chemically inert, posing problems for the covalent assembly with other building blocks. There are usually coordination atoms in most of 2D materials and their derivatives, thus coordination interaction as a strong interfacial interaction has attracted much attention. In this review, recent progress on the coordination-driven hierarchical assembly based on 2D materials is summarized, focusing on the synthesis approaches, various architectures, and structure-property relationship. Furthermore, insights into the present challenges and future research directions are also presented.

Accelerated C2H2/CO2 Separation by a Se-Functionalized Porous Coordination Polymer with Low Binding Energy

High-quality pure acetylene (C₂H₂) is a kind of crucial starting material for various value-added products. However, selective capture of C₂H₂ from the main impurity of CO₂ via porous absorbents is a great challenge, as they possess extremely similar kinetic diameters and boiling points, as well as the explosive and reactive properties of C₂H₂. Herein, we report a porous coordination polymer (PCP), (NTU-55), which assembled from the coordination between a Cu dimer and a newly designed ligand with a nonmetal selenium (Se) site. Static single-component adsorption and dynamic breakthrough experiments reveal that desolvated NTU-55 can completely adsorb C₂H₂ from the C₂H₂/CO₂ mixture (1/4, v/v) at 298 K, along with higher C₂H₂ capacity and much lower binding energy. The origin of this separation, as comprehensively revealed by density functional theory (DFT) calculations, is derived from the interaction discriminatory of C₂H₂ and CO₂ toward accessible Se and Cu adsorption sites. To the best of our knowledge, this is the first time to find the positive effect of nonmetal Se sites for selective C₂H₂ capture.

Optimized nanospace of coordination isomers with selenium sites for acetylene separation

Assisted by functional Cu and Se sites, a new group of porous isomers demonstrated systematically tunable C₂H₂/CO₂ separation.

Large-scale synthesis of crystalline g-C3N4 nanosheets and high-temperature H2 sieving from assembled films

Poly(triazine imide) (PTI), a crystalline g-C₃N₄, hosting two-dimensional nanoporous structure with an electron density gap of 0.34 nm, is highly promising for high-temperature hydrogen sieving because of its high chemical and thermal robustness. Currently, layered PTI is synthesized in potentially unsafe vacuum ampules in milligram quantities. Here, we demonstrate a scalable and safe ambient pressure synthesis route leading to several grams of layered PTI platelets in a single batch with 70% yield with respect to the precursor. Solvent exfoliation under anhydrous conditions led to single-layer PTI nanosheets evidenced by the observation of triangular g-C₃N₄ nanopores. Gas permeation studies confirm that PTI nanopores can sieve He and H₂ from larger molecules. Last, high-temperature H₂ sieving from PTI nanosheet-based membranes, prepared by the scalable filter coating technique, is demonstrated with H₂ permeance reaching 1500 gas permeation units, with H₂/CO₂, H₂/N₂, and H₂/CH₄ selectivities reaching 10, 50, and 60, respectively, at 250°C.

2D magnetic MOFs with micron-lateral size by liquid exfoliation

Herein, we obtained high-quality nanosheets for a whole family of Fe-based magnetic MOFs, MUV-1-X, through a liquid exfoliation procedure.

Ir-Doped Ni-based metal–organic framework ultrathin nanosheets on Ni foam for enhanced urea electro-oxidation

NiIr-based metal–organic frameworks grown on a nickel foam substrate (NiIr-MOF/NF) are synthesized by a solvothermal method and directly used for urea electro-oxidation.

Ultrathin two-dimensional metal-organic framework nanosheets-an emerging class of catalytic nanomaterials

The development of ultrathin two-dimensional metal-organic framework nanosheets (2D MONs) has recently attracted increasing interest due to their extensive application potential originating from their ultrathin thickness, large surface area, and innumerable accessible surface-active sites. In this frontier article, we highlight the recent developments of 2D MONs for highly efficient heterogeneous catalysts; they can be grouped into three sections in terms of their functions: (i) as catalysts capable of showing outstanding intrinsic reactivity, (ii) as support materials for prevalent catalysts, and (iii) as catalysts with multifunctional catalytic activity for diverse organic transformations. In addition, the present challenges and future opportunities in this field are also discussed.