Surface functionalization of quantum dots for biological applications

Ligand-Capped CdTe Quantum Dots as a Fluorescent Nanosensor for Detection of Copper Ions in Environmental Water Sample

In this work, as a novel fluorescent nano-sensor, a ligand-capped CdTe QDs (CdTe-L QDs) was designed for the detection and quantification of Cu²⁺ ions in environmental water samples. The synthesized QDs were characterized by transmission electron microscopy (TEM), thermo-gravimetric (TG) analysis, Fourier transform infrared (FTIR), UV-Vis spectrophotometry and fluorescence spectroscopy. Optical properties of the produced nanosensor were monitored by UV-Vis and fluorescence spectrophotometry. It was observed that fluorescence intensity of the produced nano-sensor selectively quenched by adding Cu²⁺ ions in comparison to other metal ions tested. Using CdTe-L QDs, a rapid and facile analytical method was developed to determine Cu²⁺ ions in the concentration range of 5.16 ± 0.07 × 10^- 8 mol L^- 1-1.50 ± 0.03 × 10^- 5 mol L^- 1 with a detection limit of 1.55 ± 0.05 × 10^- 8 mol L^- 1. The nanosensor was successfully applied for the determination of Cu²⁺ ions in various water samples, and the results were compared with the standard method. Graphical Abstract.

Quantum dots in imaging, drug delivery and sensor applications

Quantum dots (QDs), also known as nanoscale semiconductor crystals, are nanoparticles with unique optical and electronic properties such as bright and intensive fluorescence. Since most conventional organic label dyes do not offer the near-infrared (>650 nm) emission possibility, QDs, with their tunable optical properties, have gained a lot of interest. They possess characteristics such as good chemical and photo-stability, high quantum yield and size-tunable light emission. Different types of QDs can be excited with the same light wavelength, and their narrow emission bands can be detected simultaneously for multiple assays. There is an increasing interest in the development of nano-theranostics platforms for simultaneous sensing, imaging and therapy. QDs have great potential for such applications, with notable results already published in the fields of sensors, drug delivery and biomedical imaging. This review summarizes the latest developments available in literature regarding the use of QDs for medical applications.

Cellular uptake of nanoparticles: journey inside the cell

Nanoscale materials are increasingly found in consumer goods, electronics, and pharmaceuticals. While these particles interact with the body in myriad ways, their beneficial and/or deleterious effects ultimately arise from interactions at the cellular and subcellular level. Nanoparticles (NPs) can modulate cell fate, induce or prevent mutations, initiate cell-cell communication, and modulate cell structure in a manner dictated largely by phenomena at the nano-bio interface. Recent advances in chemical synthesis have yielded new nanoscale materials with precisely defined biochemical features, and emerging analytical techniques have shed light on nuanced and context-dependent nano-bio interactions within cells. In this review, we provide an objective and comprehensive account of our current understanding of the cellular uptake of NPs and the underlying parameters controlling the nano-cellular interactions, along with the available analytical techniques to follow and track these processes.

Versatile Bottom-Up Synthesis of Tethered Bilayer Lipid Membranes on Nanoelectronic Biosensor Devices

Interfacing nanoelectronic devices with cell membranes can enable multiplexed detection of fundamental biological processes (such as signal transduction, electrophysiology, and import/export control) even down to the single ion channel level, which can lead to a variety of applications in pharmacology and clinical diagnosis. Therefore, it is necessary to understand and control the chemical and electrical interface between the device and the lipid bilayer membrane. Here, we develop a simple bottom-up approach to assemble tethered bilayer lipid membranes (tBLMs) on silicon wafers and glass slides, using a covalent tether attachment chemistry based on silane functionalization, followed by step-by-step stacking of two other functional molecular building blocks (oligo-poly(ethylene glycol) (PEG) and lipid). A standard vesicle fusion process was used to complete the bilayer formation. The monolayer synthetic scheme includes three well-established chemical reactions: self-assembly, epoxy-amine reaction, and EDC/NHS cross-linking reaction. All three reactions are facile and simple and can be easily implemented in many research labs, on the basis of common, commercially available precursors using mild reaction conditions. The oligo-PEG acts as the hydrophilic spacer, a key role in the formation of a homogeneous bilayer membrane. To explore the broad applicability of this approach, we have further demonstrated the formation of tBLMs on three common classes of (nano)electronic biosensor devices: indium-tin oxide-coated glass, silicon nanoribbon devices, and high-density single-walled carbon nanotubes (SWNT) networks on glass. More importantly, we incorporated alemethicin into tBLMs and realized the real-time recording of single ion channel activity with high sensitivity and high temporal resolution using the tBLMs/SWNT network transistor hybrid platform. This approach can provide a covalently bonded lipid coating on the oxide layer of nanoelectronic devices, which will enable a variety of applications in the emerging field of nanoelectronic interfaces to electrophysiology.

Effects of arginine-glycine-aspartic acid peptide-conjugated quantum dots-induced photodynamic therapy on pancreatic carcinoma in vivo

Quantum dots (QDs) conjugated with integrin antagonist arginine-glycine-aspartic acid (RGD) peptides (QDs-RGD) are novel nanomaterials with a unique optical property: a high molar extinction coefficient. Previously, we have shown that QDs-RGD demonstrate a photodynamic therapy (PDT) effect as new photosensitizers for the pancreatic cancer cell line SW1990 in vitro. Here, we investigate the application of QDs-RGD in mice bearing pancreatic tumors using PDT. To ensure that more photosensitizers accumulated in tumors, QDs-RGD were injected intratumorally. After selection of an adequate dosage for injection from analyses of biodistribution images captured by an IVIS system, PDT was initiated. Three groups were created according to different PDT procedures. In group 1, mice were injected with QDs-RGD intratumorally, and an optical fiber connected to a laser light was inserted directly into the tumor. Irradiation was sustained for 20 min with a laser light (630 nm) at 100 mW/cm2. In group 2, the laser optical fiber was placed around, and not inserted into, tumors. In group 3, PDT was conducted as in group 1 but without injection of QDs-RGD. After 28 days of observation, tumors on the back of mice in group 1 grew slowly (V/V0 =3.24±0.70) compared with the control groups, whose tumors grew quickly, and the mean V/V0 reached 6.08±0.50 (group 2) and 7.25±0.82 (group 3). Histology of tumor tissues showed more necrotic tissues, more inflammatory cells, and less vascular tissue in the PDT group than those in the control groups. These results suggest that QDs-RGD-mediated PDT, with illumination using an optical fiber inserted directly into the tumor, can inhibit the growth of SW1990 tumors with high efficiency in nude mice.

Cadmium-containing quantum dots: properties, applications, and toxicity

The marriage of biology with nanomaterials has significantly accelerated advancement of biological techniques, profoundly facilitating practical applications in biomedical fields. With unique optical properties (e.g., tunable broad excitation, narrow emission spectra, robust photostability, and high quantum yield), fluorescent quantum dots (QDs) have been reasonably functionalized with controllable interfaces and extensively used as a new class of optical probe in biological researches. In this review, we summarize the recent progress in synthesis and properties of QDs. Moreover, we provide an overview of the outstanding potential of QDs for biomedical research and innovative methods of drug delivery. Specifically, the applications of QDs as novel fluorescent nanomaterials for biomedical sensing and imaging have been detailedly highlighted and discussed. In addition, recent concerns on potential toxicity of QDs are also introduced, ranging from cell researches to animal models.

Multifunctional quantum dots and liposome complexes in drug delivery

Incorporating both diagnostic and therapeutic functions into a single nanoscale system is an effective modern drug delivery strategy. Combining liposomes with semiconductor quantum dots (QDs) has great potential to achieve such dual functions, referred to in this review as a liposomal QD hybrid system (L-QD). Here we review the recent literature dealing with the design and application of L-QD for advances in bio-imaging and drug delivery. After a summary of L-QD synthesis processes and evaluation of their properties, we will focus on their multifunctional applications, ranging from in vitro cell imaging to theranostic drug delivery approaches.

Development of Quantum Dots-Labeled Antibody Fluorescence Immunoassays for the Detection of Morphine

Quantum dots (QDs)-labeled antibody fluorescence immunoassays (FLISA) for the detection of morphine were developed. Quantum dots (CdSe/ZnS), which contained carboxyl, were used to label antimorphine antibody by 1-ethyl-3-(3-dimethylaminoprophyl) carbodiimide hydrochloride/N-hydroxysulfosuccinimide, which were used as coupling reagents. The CdSe/ZnS QDs labeled antimorphine antibody (QDs labeled Ab) was characterized by fluorescence spectrum and gel electrophoresis. Plate-based FLISA and nitrocellulose membrane-based flow-through FLISA were developed and applied to quantitative and qualitative detection of morphine. Under the optimal conditions for plate-based FLISA, the linear range spanned from 3.2 × 10^-4 to 1 mg/L (R² = 0.9905), and the detection limit was 2.7 × 10^-4 mg/L. The visual detection limit for morphine by membrane-based flow-through FLISA was 0.01 mg/L. These results demonstrated that the developed fluorescence immunoassays could be applied as highly sensitive and convenient tools for rapid detection of morphine, which make it ideally suited for on-site screening of poppy shell added illegally in hot pot soup base.

High magnetic relaxivity in a fluorescent CdSe/CdS/ZnS quantum dot functionalized with MRI contrast molecules

Fluorescent quantum dots functionalized with Gd(iii) MRI contrast agents produce an unprecedentedly high T₁ relaxivity per particle (6800 mM⁻¹ s⁻¹).

Effect of gold nanoparticle size and surface coating on human red blood cells

This paper reports the impact of bovine serum albumin (BSA) coating on gold (Au) nanoparticles (NPs) with sizes of 15, 30, 50 and 70 nm on cellular uptake and haemolysis of human red blood cells (RBCs). BSA coating on gold NPs imparts extra stability in high-glutathione-containing medium, which is a major prerequisite for NPs being developed for delivery applications. BSA coating on gold NPs was characterised by Fourier transform infrared spectroscopy, whereas cellular uptake was estimated by ultraviolet–visible spectrophotometry and flow cytometry. The cellular uptake results show that the internalisation of bare gold NPs is size dependent; however, upon BSA conjugation, uptake becomes independent of particle size. Cytocompatibility of bare and BSA-coated gold NPs was assessed by MTT assay, a common method to evaluate the biocompatibility of nanomaterials, and found non-toxic. However, when bare gold NPs were exposed to human RBCs, the NPs exerted significant haemolysis, which suggests that bare gold NPs which are considered as non-toxic to mammalian cells, can be harmful to RBCs. Interestingly, BSA-coated gold NPs showed significantly lower haemolysis at similar concentrations, suggesting that BSA-coated gold NPs could be of great importance in biomedical applications.

Chemiluminescence Resonance Energy Transfer Competitive Immunoassay Employing Hapten-Functionalized Quantum Dots for the Detection of Sulfamethazine

We describe a new strategy for using chemiluminescence resonance energy transfer (CRET) by employing hapten-functionalized quantum dots (QDs) in a competitive immunoassay for detection of sulfamethazine (SMZ). Core/multishell QDs were synthesized and modified with phospholipid-PEG. The modified QDs were functionalized with the hapten 4-(4-aminophenyl-sulfonamido)butanoic acid. The CRET-based immunoassay exhibited a limit of detection for SMZ of 9 pg mL(-1), which is >4 orders of magnitude better than a homogeneous fluorescence polarization immunoassay and is 2 orders of magnitude better than a heterogeneous enzyme-linked immunosorbent assay. This strategy represents a simple, reliable, and universal approach for detection of chemical contaminants.

Cytotoxicity investigation of luminescent nanohybrids based on chitosan and carboxymethyl chitosan conjugated with Bi2S3 quantum dots for biomedical applications

Bioengineered hybrids are emerging as a new class of nanomaterials consisting of a biopolymer and inorganic semiconductors used in biomedical and environmental applications. The aim of the present work was to determine the cytocompatibility of novel water-soluble Bi2S3 quantum dots (QDs) functionalized with chitosan and O-carboxymethyl chitosan (CMC) as capping ligands using an eco-friendly aqueous process at room temperature. These hybrid nanocomposites were tested for cytocompatibility using a 3-(4,5-dimethylthiazol-2yl) 2,5-diphenyl tetrazolium bromide (MTT) cell proliferation assay with cultured human osteosarcoma cells (SAOS), human embryonic kidney cells (HEK293T cells) and a LIVE/DEAD® viability-cytotoxicity assay. The results of the in vitro assays demonstrated that the CMC and chitosan-based nanohybrids were not cytotoxic and exhibited suitable cell viability responses. However, despite the "safe by design" approach used in this research, we have proved that the impact of the size, surface charge and biofunctionalization of the nanohybrids on cytotoxicity was cell type-dependent due to complex mechanisms. Thus, these novel bionanocomposites offer promising prospects for potential biomedical and pharmaceutical applications as fluorescent nanoprobes.

Biological synthesis of fluorescent nanoparticles by cadmium and tellurite resistant Antarctic bacteria: exploring novel natural nanofactories

Background

Fluorescent nanoparticles or quantum dots (QDs) have been intensely studied for basic and applied research due to their unique size-dependent properties. There is an increasing interest in developing ecofriendly methods to synthesize these nanoparticles since they improve biocompatibility and avoid the generation of toxic byproducts. The use of biological systems, particularly prokaryotes, has emerged as a promising alternative. Recent studies indicate that QDs biosynthesis is related to factors such as cellular redox status and antioxidant defenses. Based on this, the mixture of extreme conditions of Antarctica would allow the development of natural QDs producing bacteria.

Results

In this study we isolated and characterized cadmium and tellurite resistant Antarctic bacteria capable of synthesizing CdS and CdTe QDs when exposed to these oxidizing heavy metals. A time dependent change in fluorescence emission color, moving from green to red, was determined on bacterial cells exposed to metals. Biosynthesis was observed in cells grown at different temperatures and high metal concentrations. Electron microscopy analysis of treated cells revealed nanometric electron-dense elements and structures resembling membrane vesicles mostly associated to periplasmic space. Purified biosynthesized QDs displayed broad absorption and emission spectra characteristic of biogenic Cd nanoparticles.

Conclusions

Our work presents a novel and simple biological approach to produce QDs at room temperature by using heavy metal resistant Antarctic bacteria, highlighting the unique properties of these microorganisms as potent natural producers of nano-scale materials and promising candidates for bioremediation purposes.

Click Chemistry-Mediated Nanosensors for Biochemical Assays

Click chemistry combined with functional nanoparticles have drawn increasing attention in biochemical assays because they are promising in developing biosensors with effective signal transformation/amplification and straightforward signal readout for clinical diagnostic assays. In this review, we focus on the latest advances of biochemical assays based on Cu (I)-catalyzed 1, 3-dipolar cycloaddition of azides and alkynes (CuAAC)-mediated nanosensors, as well as the functionalization of nanoprobes based on click chemistry. Nanoprobes including gold nanoparticles, quantum dots, magnetic nanoparticles and carbon nanomaterials are covered. We discuss the advantages of click chemistry-mediated nanosensors for biochemical assays, and give perspectives on the development of click chemistry-mediated approaches for clinical diagnosis and other biomedical applications.

Cellulosic micelles as nanocapsules of liposoluble CdSe/ZnS quantum dots for bioimaging

Sustainable light-emitting nanoaggregates obtained by encapsulating liposoluble CdSe/ZnS QDs in novel cellulosic micelles show promise in bioimaging.

Metal-based quantum dots: synthesis, surface modification, transport and fate in aquatic environments and toxicity to microorganisms

The intense interest in metal-based QDs is diluted by the fact that they cause risks to aquatic environments.

Perspective on Nanoparticle Technology for Biomedical Use

This review gives a short overview on the widespread use of nanostructured and nanocomposite materials for disease diagnostics, drug delivery, imaging and biomedical sensing applications. Nanoparticle interaction with a biological matrix/entity is greatly influenced by its morphology, crystal phase, surface chemistry, functionalization, physicochemical and electronic properties of the particle. Various nanoparticle synthesis routes, characterization, and functionalization methodologies to be used for biomedical applications ranging from drug delivery to molecular probing of underlying mechanisms and concepts are described with several examples (150 references).

Photoluminescent Eu-containing polyoxometalate/gemini surfactant hybrid nanoparticles for biological applications

In water, Eu-containing polyoxometalate/gemini surfactant hybrid spheres with long emission timescale (3.758 ms) and high fluorescence quantum yield (25.17%) behaviors were synthesized.

Surface Properties and Photocatalytic Activities of the Colloidal ZnS:Mn Nanocrystals Prepared at Various pH Conditions

Water-dispersible ZnS:Mn nanocrystals (NC) were synthesized by capping the surface with mercaptoacetic acid (MAA) molecules at three different pH conditions. The obtained ZnS:Mn-MAA NC products were physically and optically characterized by corresponding spectroscopic methods. The UV-Visible absorption spectra and PL emission spectra showed broad peaks at 310 and 590 nm, respectively. The average particle sizes measured from the HR-TEM images were 5 nm, which were also supported by the Debye-Scherrer calculations using the X-ray diffraction (XRD) data. Moreover, the surface charges and the degrees of aggregation of the ZnS:Mn-MAA NCs were determined by electrophoretic and hydrodynamic light scattering methods, indicating formation of agglomerates in water with various sizes (50–440 nm) and different surface charge values accordingly the preparation conditions of the NCs (−7.59 to −24.98 mV). Finally, the relative photocatalytic activities of the ZnS:Mn-MAA NCs were evaluated by measuring the degradation rate of methylene blue (MB) molecule in a pseudo first-order reaction condition under the UV-visible light irradiation. As a result, the ZnS:Mn-MAA NC prepared at the pH 7 showed the best photo-degradation efficiency of the MB molecule with the first-order rate constant (k_obs) of 2.0 × 10⁻³·min⁻¹.

Functional architectures based on self-assembly of bio-inspired dipeptides: Structure modulation and its photoelectronic applications

Getting inspiration from nature and further developing functional architectures provides an effective way to design innovative materials and systems. Among bio-inspired materials, dipeptides and its self-assembled architectures with functionalities have recently been the subject of intensive studies. However, there is still a great challenge to explore its applications likely due to the lack of effective adaptation of their self-assembled structures as well as a lack of understanding of the self-assembly mechanisms. In this context, taking diphenylalanine (FF, a core recognition motif for molecular self-assembly of the Alzheimer's β-amyloid polypeptides) as a model of bio-inspired dipeptides, recent strategies on modulation of dipeptide-based architectures were introduced with regard to both covalent (architectures modulation by coupling functional groups) and non-covalent ways (controlled architectures by different assembly pathways). Then, applications are highlighted in some newly emerging fields of innovative photoelectronic devices and materials, such as artificial photosynthetic systems for renewable solar energy storage and renewable optical waveguiding materials for optoelectronic devices. At last, the challenges and future perspectives of these bio-inspired dipeptides are also addressed.

Development of Fluorescence Sensing Material Based on CdSe/ZnS Quantum Dots and Molecularly Imprinted Polymer for the Detection of Carbaryl in Rice and Chinese Cabbage

A fluorescence sensing material based on quantum dots with excellent optical properties and molecularly imprinted polymer (QDs@MIP) with specific recognition has been developed. First the surface of CdSe/ZnS QDs was modified with ionic liquids (ILs) by electrostatic interaction. The fluorescence sensing material was constructed from anchoring the MIP layer on IL modified CdSe/ZnS QDs by copolymerization, which had been developed for the detection of carbaryl in rice and Chinese cabbage. The MIP fluorescence was more strongly quenched by carbaryl than the non-imprinted polymer (NIP) fluorescence, which indicated that the QDs@MIP could selectively recognize the corresponding carbaryl. Furthermore, the developed QDs@MIP method was validated by HPLC and ELISA respectively, and the results of these methods were well correlated (R(2) = 0.98). The fluorescence sensing material had obvious advantages, such as being easily prepared and having specific recognition and photostability. The developed method was simple and effective for the detection of carbaryl. And, it could also provide the technical support for the rapid detection in food safety fields.

Fluorescent magnesium nanocomplex in a protein scaffold for cell nuclei imaging applications

For the first time, we report a facile strategy for the synthesis of ultra-fine blue-green emitting fluorescent magnesium nanoparticles–protein complex (MgNC) which shows excellent photo stability and also stain cell nuclei with high specificity.