BiOX (X = Cl, Br, I) photocatalytic nanomaterials: Applications for fuels and environmental management

Fabrication of stable high-performance urchin-like CeO2/ZnO@Au hierarchical heterojunction photocatalyst for water remediation

In this paper, the urchin-like CeO₂/ZnO@Au photocatalyst was rationally designed and prepared through hydrothermal method, chemical precipitation and photo reduction deposition. The optimal photocatalyst (CZA8) degraded Rhodamine B (RhB), 4-nitrophenol (4-NP) and Naproxen (NPX) about 100% within 20 min, 91.4% within 60 min and 88.9% within 30 min under Xe lamp illumination, respectively. Besides, the CZA8 possesses outstanding photo corrosion resistance capacity which has been verified with the cycle degradation experiments. The photocatalyst displays excellent light response and efficient separation of photo-induced carriers due to the fabrication of type-II heterojunction, the presence of surface plasmon resonance (SPR) effect and as well as the oxygen vacancy. The oxygen vacancy was systematically characterized by XPS, PL and Raman. Moreover, the photocatalytic degradation pathways are proposed based on the LC-MS results. Finally, a novel photocatalytic mechanism for photocatalytic oxidation of RhB, 4-NP and NPX is discussed and schematically illuminated.

Advanced Two-Dimensional Heterojunction Photocatalysts of Stoichiometric and Non-Stoichiometric Bismuth Oxyhalides with Graphitic Carbon Nitride for Sustainable Energy and Environmental Applications

Semiconductor-based photocatalysis has been identified as an encouraging approach for solving the two main challenging problems, viz., remedying our polluted environment and the generation of sustainable chemical energy. Stoichiometric and non-stoichiometric bismuth oxyhalides (BiOX and BixOyXz where X = Cl, Br, and I) are a relatively new class of semiconductors that have attracted considerable interest for photocatalysis applications due to attributes, viz., high stability, suitable band structure, modifiable energy bandgap and two-dimensional layered structure capable of generating an internal electric field. Recently, the construction of heterojunction photocatalysts, especially 2D/2D systems, has convincingly drawn momentous attention practicably owing to the productive influence of having two dissimilar layered semiconductors in face-to-face contact with each other. This review has systematically summarized the recent progress on the 2D/2D heterojunction constructed between BiOX/BixOyXz with graphitic carbon nitride (g-C3N4). The band structure of individual components, various fabrication methods, different strategies developed for improving the photocatalytic performance and their applications in the degradation of various organic contaminants, hydrogen (H2) evolution, carbon dioxide (CO2) reduction, nitrogen (N2) fixation and the organic synthesis of clean chemicals are summarized. The perspectives and plausible opportunities for developing high performance BiOX/BixOyXz-g-C3N4 heterojunction photocatalysts are also discussed.

Morphology Regulation Mechanism and Enhancement of Photocatalytic Performance of BiOX (X = Cl, Br, I) via Mannitol-Assisted Synthesis

BiOX (X = Cl, Br, I) photocatalysts with dominant (110) facets were synthesized via a mannitol-assisted solvothermal method. This is the first report on the exposed (110) facets-, size-, and defects-controlled synthesis of BiOX achieved by solvothermal synthesis with mannitol. This polyol alcohol acted simultaneously as a solvent, capping agent, and/or soft template. The mannitol concentration on the new photocatalysts morphology and surface properties was investigated in detail. At the lowest concentration tested, mannitol acted as a structure-directing agent, causing unification of nanoparticles, while at higher concentrations, it functioned as a solvent and soft template. The effect of exposed (110) facet and surface defects (Bi(3−x)+, Bi4+, Bi5+) of BiOX on the photocatalytic activity of nanomaterials under the UV–Vis irradiation were evaluated by oxidation of Rhodamine B (RhB) and 5-fluorouracil (5-FU), an anticancer drug, and by reduction of Cr(VI). Additionally, the influence of crucial factors on the formation of BiOX in the synthesis with mannitol was discussed extensively, and the mechanism of BiOX formation was proposed. These studies presented a new simple method for synthesizing BiOX without any additional surfactants or shape control agents with good photocatalytic activity. The study also provided a better understanding of the effects of solvothermal conditions on the BiOX crystal growth.

Zinc sulfide quantum dots/zinc oxide nanospheres/bismuth-enriched bismuth oxyiodides as Z-scheme/type-II tandem heterojunctions for an efficient charge separation and boost solar-driven photocatalytic performance

A novel zinc sulfide quantum dot (ZnS QD)/zinc oxide (ZnO) nanosphere/bismuth-enriched bismuth oxyiodide (Bi₄O₅I₂) tandem heterojunction photocatalyst is fabricated through two-step solvothermal, calcination and one-step hydrothermal strategies. The successfully constructed core-shell nanostructure can increase the interface area and the active sites of the composite photocatalysts. The formation of a Z-scheme/Type-II tandem heterojunction favors the transfer and spatial separation of charge carriers, in which Bi₄O₅I₂ plays a bridging role to connect ZnO and ZnS. Simultaneously, the participation of Bi₄O₅I₂ significantly shortens the band gap of the composite photocatalyst. This dual functional ZnO@Bi₄O₅I₂/ZnS composite photocatalyst has a high photocatalytic hydrogen evolution rate of 578.4 µmol g^-1h^-1 and an excellent photocatalytic degradation efficiency for bisphenol A (BPA) and 2,4,5-trichlorophenol (TCP). In addition, cycling tests show that ZnO@Bi₄O₅I₂/ZnS has a high stability, which is favorable for practical applications. This novel ZnO@Bi₄O₅I₂/ZnS Z-scheme/Type-II tandem heterojunction photocatalyst will provide new ideas for the multichannel charge transfer of other highly efficient heterojunction photocatalysts.

Recent progress on strategies for the preparation of 2D/2D MXene/g-C3N4 nanocomposites for photocatalytic energy and environmental applications

This review summarizes the possible synthetic routes, optical and morphological features to explore the 2D/2D interface and mechanism path in 2D/2D MXene/g-C₃N₄ nanocomposites for photocatalytic applications.

Liquid-phase exfoliated MoS2 nanosheets doped with p-type transition metals: a comparative analysis of photocatalytic and antimicrobial potential combined with density functional theory

MoS2 nanosheets were developed by undertaking the liquid-phase exfoliation of bulk counterparts. In order to enhance its photocatalytic properties, the host material was doped with p-type transition metals (i.e., Ag, Co, Bi, and Zr). The hydrothermal technique was used to produce samples doped with 7.5 wt% transition metals (TM). X-ray diffraction detected the existence of 2H-phase by mirroring its reflection at 2θ ∼ 14°, while the peak distribution revealed the degree of exfoliation in samples. Low PL intensities indicated a lower recombination of electron-hole pairs, as corroborated by a high degree of photocatalytic action. Raman analysis was undertaken to identify molecular vibrations. The A1g mode in Raman spectra consistently showed a blueshift in all samples and the E12g mode was only slightly affected, which is evidence of the p-type doping in the MoS2 nanosheets. In the XPS spectrum, two characteristic peaks of Mo 3d appeared at 229.87 and 233.03 eV assigned to Mo-3d5/2 and Mo-3d3/2, respectively. Furthermore, a microstructural examination with HR-TEM and FESEM divulged a thin-layered structure of MoS2 consisting of flat, gently curved or twisted nanosheets. Diverse morphologies were observed with a non-uniform distribution of the dopant. Photocatalytic action of the TM-doped products effectively degraded methylene blue (MB) concentrations of up to 94 percent (for Ag-MoS2). The synergistic effect of doped MoS2 nanosheets against S. aureus in comparison to E. coli bacteria was also evaluated. The efficacy % age improved from (0-31.7%) and (23.5-55.2%) against E. coli, and (0-34.2%) and (8.3-69.23%) against S. aureus. Moreover, results from first principles calculations indicate that substitutional doping of TM atoms is indeed advantageous. Theoretical calculations confirmed that doping with Ag, Co, Bi, and Zr leads to a decrease in the band gap to a certain degree, in which the conduction band edge shifts toward lower energy, while the valence band shifts closer to the high energy end. It can be concluded that Ag, Co, and Bi impurities can lead to beneficial p-type doping in MoS2 monolayered structures. With regards to doping with Zr, the acceptor levels are formed above the edge of the valence band, revealing an introduction of the p-type character.

Control of Photocarrier Separation and Recombination at Bismuth Oxyhalide Interface for Nitrogen Fixation

Developing high-efficiency photocatalysts for clean energy generation is a grand challenge, which requires simultaneously steering photocarrier dynamics and chemical activity for a specific reaction. To this end, here for the first time, we explore the real-time photocarrier transport property and catalytic mechanism of nitrogen reduction reaction (NRR) at the interface of bismuth oxyhalides (BiOX, X = Cl, Br, and I), an inexpensive and green semiconductor. By time-dependent ab initio non-adiabatic molecular dynamics simulations, we show that the separation and recombination processes of excited carriers as well as the catalytic activity can be concurrently optimized by precise band structure engineering. The exact influence of impurity states and heterojunction on the reduction power and lifetime of photogenerated carriers, light absorbance, and NRR activity/selectivity of BiOX are clearly unveiled, to provide essential physical insights for improving the photocatalytic efficiency of semiconductors for practical solar energy conversion and hydrogen fuel storage.

Recent advances in application of graphitic carbon nitride-based catalysts for degrading organic contaminants in water through advanced oxidation processes beyond photocatalysis: A critical review

Advanced oxidation processes (AOPs) have attracted much interest in the field of water treatment owing to their high removal efficiency for refractory organic contaminants. Graphitic carbon nitride (g-C₃N₄)-based catalysts with high performance and cost effectiveness are promising heterogeneous catalysts for AOPs. Most research on g-C₃N₄-based catalysts focuses on photocatalytic oxidation, but increasingly researchers are paying attention to the application of g-C₃N₄-based catalysts in other AOPs beyond photocatalysis. This review aims to concisely highlight recent state-of-the-art progress of g-C₃N₄-based catalysts in AOPs beyond photocatalysis. Emphasis is made on the application of g-C₃N₄-based catalysts in three classical AOPs including Fenton-based processes, catalytic ozonation and persulfates activation. The catalytic performance and involved mechanism of g-C₃N₄-based catalysts in these AOPs are discussed in detail. Meanwhile, the effect of water chemistry including pH, water temperature, natural organic matter, inorganic anions and dissolved oxygen on the catalytic performance of g-C₃N₄-based catalysts are summarized. Moreover, the reusability, stability and toxicity of g-C₃N₄-based catalysts in water treatment are also mentioned. Lastly, perspectives on the major challenges and opportunities of g-C₃N₄-based catalysts in these AOPs are proposed for better developments in the future research.

Semiconducting Nanocrystalline Bismuth Oxychloride (BiOCl) for Photocatalytic Reduction of CO2

The reduction of CO2 is relevant for the production of compounds as part of the carbon capture and utilization research approaches. Thus, photocatalytic reduction of CO2 over a tailored BiOCl-based photocatalyst (BTEG) was tested under UV light (365 nm). BTEG was synthesized in the presence of triethylene glycol, which gave 4-nm crystallites, much smaller than the 30 nm crystallites of commercial BiOCl. Commercial BiOCl reduced CO2 mainly to methane with a minor fraction of ethanol, and was inactivated after 20 h. BTEG was a more active catalyst for CO2 photoreduction, producing approximately equal amounts of methane, methanol, and ethanol while consuming 0.38 µmol g−1 h−1 of CO2 before the experiment was stopped after 43 h, with the catalyst still active. The different products formed by the BTEG photocatalyst samples were tentatively ascribed to its greater content of {110} facets. Thus, in addition to band-gap tuning, the relative fractions of BiOCl facets had a key role in the effective photocatalytic reduction of CO2, and the BiOCl-based BTEG catalyst promoted the formation of important compounds as methanol and ethanol.

Epitaxial growth of bismuth oxyhalide thin films using mist CVD at atmospheric pressure

We report the epitaxial growth of bismuth oxyhalide BiOX (X = Cl, Br, and I) thin films using mist chemical vapour deposition at atmospheric pressure. The thin films grown under optimum conditions possessed atomically flat surfaces and high crystallinity, where the lattice constants of BiOX were controlled by epitaxial strain.

Insights into catalytic removal and separation of attached metals from natural-aged microplastics by magnetic biochar activating oxidation process

Natural-aged microplastics with changed surface properties accumulate, redistribute and spread in all water fields as carriers of hazardous substances. The combined hazard of co-contamination of microplastics and hazardous substances expands the ecological risks, which urgently needs to design treatment schemes for pollutant removal from microplastics. In this paper, a facile and applicable magnetic biochar with porosity and graphitization (PGMB) was prepared for realizing the goal of metal removal from the microplastics. Heterogeneous catalysis of persulfate (PS) activated by PGMB achieved the decomposition of organics, with the decrease of more than 60% of the attached Pb on the surface of microplastics, and the adsorbed metal amount by PGMB in this system (31.29 mg/g) is much higher than that by the individual PGMB group (7.07 mg/g). Analysis demonstrated that the organic layer covered on the microplastic surface over the long-term weathering provided the key sites for metal sorption, whose decomposition and peeling were the critical steps in whole process. The prepared PGMB was responsible for activating PS to produce reactive species for decomposing the organic matter accompanied with detaching metals from microplastic surface, also would keep the role for re-adsorption of the released metals and separation from aqueous phase by magnetic force. The influences of natural environmental factors including salinity, common matrix species, and temperature on the performance of PGMB/PS system for metal removal from microplastics were discussed to illustrate the universality of the scheme in saline or organic-rich waters. The results of this study provided underlying insights for removing metals from microplastic surface, and decreasing the harm risks in the co-contamination of microplastics and hazardous substances.

In Situ Grown Single-Atom Cobalt on Polymeric Carbon Nitride with Bidentate Ligand for Efficient Photocatalytic Degradation of Refractory Antibiotics

Semiconductor photocatalysis is a promising technology to tackle refractory antibiotics contamination in water. Herein, a facile in situ growth strategy is developed to implant single-atom cobalt in polymeric carbon nitride (pCN) via the bidentate ligand for efficient photocatalytic degradation of oxytetracycline (OTC). The atomic characterizations indicate that single-atom cobalt is successfully anchored on pCN by covalently forming the CoO bond and CoN bond, which will strengthen the interaction between single-atom cobalt and pCN. This single-atom cobalt can efficiently expand optical absorption, increase electron density, facilitate charge separation and transfer, and promote OTC degradation. As the optimal sample, Co(1.28%)pCN presents an outstanding apparent rate constant for OTC degradation (0.038 min^-1 ) under visible light irradiation, which is about 3.7 times than that of the pristine pCN. The electron spin resonance (ESR) tests and reactive species trapping experiments demonstrate that the ¹ O₂ , h⁺ , •O₂^- , and •OH are responsible for OTC degradation. This work develops a new way to construct single-atom-modified pCN and provides a green and highly efficient strategy for refractory antibiotics removal.

BiOCl/WS2 hybrid nanosheet (2D/2D) heterojunctions for visible-light-driven photocatalytic degradation of organic/inorganic water pollutants

This report presents the superior visible-light-driven photocatalytic response of novel 2D/2D BiOCl/WS₂ (BW _X ) hybrid nanosheet heterojunctions prepared by a simple solution based sonochemical technique. These BW _X hybrid nanosheets are composed of 2D transition metal dichalcogenide material WS₂ and BiOCl nanosheets. The comparative study of photocatalytic activity of BiOCl and BiOCl/WS₂ hybrid nanosheets is carried out via photodegradation of Malachite Green (MG) and photoreduction of heavy metal ion Cr(vi) under visible light irradiation. The quantum efficiency of the samples is estimated in terms of the incident photon to electron conversion efficiency (IPCE) measurements. Nearly 98.4% of the MG degradation was achieved over BiOCl/WS₂ (2%) photocatalyst in 45 min of irradiation. BiOCl/WS₂ (2%) hybrid nanosheet catalyst showed the highest external quantum efficiency (EQE) in both the UV and visible regimes. This accomplishment demonstrated the promise of commercial application of the 2D/2D BiOCl/WS₂ (2%) hybrid nanosheet photocatalyst.

Novel Ternary Heterogeneous Reduction Graphene Oxide (RGO)/BiOCl/TiO2 Nanocomposites for Enhanced Adsorption and Visible-Light Induced Photocatalytic Activity toward Organic Contaminants

Herein, we describe a simple and cost-effective design for the fabrication of a novel ternary RGO/BiOCl/TiO₂ nanocomposites through a simple hydrothermal process. The prepared nanocomposites were characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), X-ray diffraction (XRD), UV–vis diffuse reflectance spectroscopy (UV–vis DRS) and N₂ adsorption–desorption analysis. Organic contaminants—such as methylene blue (MB), methyl orange (MO), rhodamine B (RhB) and amido black-10B (AB-10B)—were employed as the target pollutants to evaluate the adsorption capacity and photocatalytic activity of RGO/BiOCl/TiO₂ nanocomposites. From experimental data, it was also found that the amount of TiO₂ impressed the photocatalytic performance, and the nanocomposites with 10% of TiO₂ showed the best photocatalytic activity. The improved photocatalytic performance may be mainly due to the narrow band gap, and the charge separation and migration of RGO. Moreover, good recyclability was obtained from RGO/BiOCl/TiO₂ nanocomposites, and scavenger tests indicated that photogenerated holes were the main active species in the reaction system. Therefore, the prepared RGO/BiOCl/TiO₂ nanocomposites have broad applications foreground in pollutants purification.

Effect of the preparation method and metal content on the synthesis of metal modified titanium oxide used for the removal of salicylic acid under UV light

Titanium dioxide modified with Ag and Fe was synthesized using two preparation methods, characterized and applied to the photocatalytic degradation of salicylic acid in aqueous solution. The modified TiO₂ samples were prepared by the sol-gel and wet impregnation methods starting from titanium(IV) isopropoxide and using AgNO₃ and Fe(NO₃)₃·9H₂O as precursors of the modifiers, with their content varying between 0 and 5 wt.%. Catalysts characterization was based on powder X-ray diffraction (PXRD), nitrogen physisorption at 77 K, temperature programmed reduction (H₂-TPR), chemisorption of NH₃ at 343 K and X-ray photoelectron spectroscopy (XPS). The photocatalytic degradation of salicylic acid by modified TiO₂ was investigated under ultraviolet irradiation at 298 K considering various concentrations of the catalyst, between 100 and 1000 mg_catalyst/dm³, and of the organic molecule, between 0 and 15 mg/dm³. The catalysts most active in the degradation of salicylic acid were those having the highest Fe content.

Potential Natural Fiber Polymeric Nanobiocomposites: A Review

Composite materials reinforced with biofibers and nanomaterials are becoming considerably popular, especially for their light weight, strength, exceptional stiffness, flexural rigidity, damping property, longevity, corrosion, biodegradability, antibacterial, and fire-resistant properties. Beside the traditional thermoplastic and thermosetting polymers, nanoparticles are also receiving attention in terms of their potential to improve the functionality and mechanical performances of biocomposites. These remarkable characteristics have made nanobiocomposite materials convenient to apply in aerospace, mechanical, construction, automotive, marine, medical, packaging, and furniture industries, through providing environmental sustainability. Nanoparticles (TiO2, carbon nanotube, rGO, ZnO, and SiO2) are easily compatible with other ingredients (matrix polymer and biofibers) and can thus form nanobiocomposites. Nanobiocomposites are exhibiting a higher market volume with the expansion of new technology and green approaches for utilizing biofibers. The performances of nanobiocomposites depend on the manufacturing processes, types of biofibers used, and the matrix polymer (resin). An overview of different natural fibers (vegetable/plants), nanomaterials, biocomposites, nanobiocomposites, and manufacturing methods are discussed in the context of potential application in this review.

Sustainable hydrogen production by molybdenum carbide-based efficient photocatalysts: From properties to mechanism

Hydrogen is considered to be a promising energy carrier to solve the issue of energy crisis. Molybdenum carbide (Mo_xC) is the typical material, which has similar properties of Pt and thought to be an attractive alternative to noble metals for H₂ evolution. The study of Mo_xC as alternative catalyst for H₂ production is almost focused on electrocatalytic field, while the application of Mo_xC as a co-catalyst in photocatalytic H₂ evolution has received in-depth research in recent years. Particularly, Mo_xC exhibits significant enhancement in the H₂ production performance of semiconductors under visible light irradiation. However, a review discussing Mo_xC serving as a co-catalysts in the photocatalytic H₂ evolution is still absent. Herein, the recent progress of Mo_xC on photocatalytic H₂ evolution is reviewed. Firstly, the preparation methods including chemical vapor deposition, temperature programming, and organic-inorganic hybridization are detailly summarized. Then, the fundamental structure, electronic properties, and specific conductance of Mo_xC are illustrated to illuminate the advantages of Mo_xC as a co-catalyst for H₂ evolution. Furthermore, the different heterojunctions formed between Mo_xC and other semiconductors for enhancing the photocatalytic performance are emphasized. Finally, perspectives regarding the current challenges and the future research directions on the improvement of catalytic performance of Mo_xC-based photocatalysts are also presented.

Photocatalytic BiOX Mortars under Visible Light Irradiation: Compatibility, NOx Efficiency and Nitrate Selectivity

The use of new photocatalysts active under visible light in cement-based building materials represents one interesting alternative to improve the air quality in the urban areas. This work undertakes the feasibility of using BiOX (X = Cl and I) as an addition on mortars for visible-light-driven NOx removal. The interaction between BiOX photocatalysts and cement matrix, and the influence of their addition on the inherent properties of the cement-based materials was studied. The NO removal by the samples ranking as follows BiOCl-cem > BiOI-cem > TiO2-cem. The higher efficiency under visible light of BiOCl-cem might be ascribed to the presence of oxygen vacancies together with a strong oxidation potential. BiOI-cem suffers a phase transformation of BiOI in alkaline media to an I-deficient bismuth oxide compound with poor visible light absorbance capability. However, BiOI-cem showed considerably higher nitrate selectivity that resulted in the highest NOx global removal efficiency. These results can make its use more environmentally sustainable than TiO2 and BiOCl cement composites.

Synthesis of a novel one-dimensional Bi2O2CO3–BiOCl heterostructure and its enhanced photocatalytic activity

A novel one-dimensional Bi₂O₂CO₃–BiOCl heterostructure was synthesized. BiOCl nanosheets uniformly and vertically grew onto the Bi₂O₂CO₃ porous rods via crystallographic oriented epitaxial nucleation and growth. Bi₂O₂CO₃–BiOCl displayed excellent photocatalytic activity.

Visible-light-driven photocatalytic degradation of sulfamethazine by surface engineering of carbon nitride：Properties, degradation pathway and mechanisms

Polymeric carbon nitride semiconductor has been explored as emerging metal-free photocatalyst for solving the energy shortage and environmental issues. However, the efficiency of carbon nitride is still not satisfying. Herein, a facile copolymerization between L-cysteine and dicyandiamide has been applied to forming the modified carbon nitride photocatalysts. The photocatalytic performance was evaluated through degrading sulfamethazine under visible light illumination. The ameliorative structure and tuned energy band result in visible-light adsorption enhancement. In addition, nitrogen vacancies offer more sites to adsorbing molecular oxygen, thereby facilitating the transfer of electrons from carbon nitride to the surface adsorbed oxygen. As a result, the degradation rate of optimized modified carbon nitride sample for sulfamethazine was 0.1062 min^-1, which was almost 12 times than that of carbon nitride (0.0086 min^-1). Superoxide radicals and holes were mainly responsible for the sulfamethazine photodegradation by modified carbon nitride. Two reaction intermediates/products were observed and identified by high performance liquid chromatography-mass spectrometer, and a possible reaction pathway was proposed. This study provides new insights into the design of highly efficient photocatalyst for other organic pollutants degradation.