PEG-PLGA copolymers: their structure and structure-influenced drug delivery applications

Biocompatibility of Biomaterials for Nanoencapsulation: Current Approaches

Nanoencapsulation is an approach to circumvent shortcomings such as reduced bioavailability, undesirable side effects, frequent dosing and unpleasant organoleptic properties of conventional drug delivery systems. The process of nanoencapsulation involves the use of biomaterials such as surfactants and/or polymers, often in combination with charge inducers and/or ligands for targeting. The biomaterials selected for nanoencapsulation processes must be as biocompatible as possible. The type(s) of biomaterials used for different nanoencapsulation approaches are highlighted and their use and applicability with regard to haemo- and, histocompatibility, cytotoxicity, genotoxicity and carcinogenesis are discussed.

Biodegradable self-assembled nanoparticles of PEG-PLGA amphiphilic diblock copolymer as a promising stealth system for augmented vinpocetine brain delivery

Vinpocetine (VNP), a semisynthetic drug, is utilized for the treatment of cerebrovascular and memory disorders. This work aimed at formulation of biodegradable VNP long-circulating nanoparticles utilizing Polyethylene glycol methyl ether-block-poly lactide-co-glycolide (PEG-PLGA) copolymer to surmount the drug drawbacks including low oral bioavailability and short elimination half-life. VNP nanoparticles were formulated using nanoprecipitation technique. A 2⁴ factorial design was applied to assess the impact of formulation and process variables on the nanoparticles' characteristics. Statistical analysis revealed that nanoparticles size (Y₁) significantly increased with increasing PEG-PLGA amount (X₁), poly-vinyl alcohol concentration (X₂), and PLGA content (X₄), while decreased with increasing sonication time (X₃). Furthermore, the entrapment efficiency (Y₂) was positively affected by both PEG-PLGA amount and PLGA content, while negatively affected by poly-vinyl alcohol concentration. The optimized formulation prepared using 200 mg of PEG-PLGA polymer (PEG: PLGA 2000: 4,500), 0.5% polyvinyl alcohol with sonication time of 60 s achieved spherical shape with particle size of 43 nm and drug entrapment of 82%. A significant bioavailability enhancement of VNP with marked prolongation of the in vivo systemic exposure of the drug and increased brain levels has also been achieved following intraperitoneal administration in Wistar rats. Thus, the optimized formulation could be regarded as a promising stealth nanocarrier that could surmount the drug pitfalls and enhance its brain delivery.

PEG-b-PLGA Nanoparticles Loaded with Geraniin from Phyllanthus Watsonii Extract as a Phytochemical Delivery Model

The study outlined a standardized double emulsion method for simple poly(ethylene glycol)-block-poly(lactic-co-glycolic acid) (PEG-b-PLGA) nanoparticle (NP) synthesis. The PEG-b-PLGA NP was also used for entrapment of geraniin as a simple model system for phytochemical delivery. PEG-b-PLGA NPs were prepared using the double emulsion method. The yields and particle sizes of PEG-b-PLGA NPs obtained with and without encapsulation of geraniin were 57.6% and 134.20 ± 1.45 nm and 66.7% and 102.70 ± 12.36 nm, respectively. High-performance liquid chromatography of geraniin that was extracted from Phyllanthus watsonii was detected at 64 min. Geraniin burst release began at 40 min and fully released at 3 h. PEG-b-PLGA NP was non-cytotoxic, while cytotoxicity of geraniin was dose dependant towards normal human epithelial colon cells, CCD 841 CoN cells.

Innovative Therapeutic and Delivery Approaches Using Nanotechnology to Correct Splicing Defects Underlying Disease

Alternative splicing of pre-mRNA contributes strongly to the diversity of cell- and tissue-specific protein expression patterns. Global transcriptome analyses have suggested that >90% of human multiexon genes are alternatively spliced. Alterations in the splicing process cause missplicing events that lead to genetic diseases and pathologies, including various neurological disorders, cancers, and muscular dystrophies. In recent decades, research has helped to elucidate the mechanisms regulating alternative splicing and, in some cases, to reveal how dysregulation of these mechanisms leads to disease. The resulting knowledge has enabled the design of novel therapeutic strategies for correction of splicing-derived pathologies. In this review, we focus primarily on therapeutic approaches targeting splicing, and we highlight nanotechnology-based gene delivery applications that address the challenges and barriers facing nucleic acid-based therapeutics.

Formulation and Optimization of Avanafil Biodegradable Polymeric Nanoparticles: A Single-Dose Clinical Pharmacokinetic Evaluation

Avanafil (AVA) is a second-generation phosphodiesterase-5 (PDE5) inhibitor. AVA shows high selectivity to penile tissues and fast absorption, but has a bioavailability of about 36%. The aim was to formulate and optimize AVA-biodegradable nanoparticles (NPs) to enhance AVA bioavailability. To assess the impact of variables, the Box-Behnken design was utilized to investigate and optimize the formulation process variables: the AVA:poly (lactic-co-glycolic acid) (PLGA) ratio (w/w, X1); sonication time (min, X2); and polyvinyl alcohol (PVA) concentration (%, X3). Particle size (nm, Y1) and EE% (%, Y2) were the responses. The optimized NPs were characterized for surface morphology and permeation. Furthermore, a single-oral dose (50 mg AVA) pharmacokinetic investigation on healthy volunteers was carried out. Statistical analysis revealed that all the investigated factors exhibited a significant effect on the particle size. Furthermore, the entrapment efficiency (Y2) was significantly affected by both the AVA:PLGA ratio (X1) and PVA concentration (X3). Pharmacokinetic data showed a significant increase in the area under the curve (1.68 folds) and plasma maximum concentration (1.3-fold) for the AVA NPs when compared with raw AVA. The optimization and formulation of AVA as biodegradable NPs prepared using solvent evaporation (SE) proves a successful way to enhance AVA bioavailability.

An insight into the role of riboflavin ligand in the self-assembly of poly(lactic-co-glycolic acid)-based nanoparticles - a molecular simulation and experimental approach

Nanoparticles (NPs) used for targeted delivery purposes are rapidly gaining importance in diagnostic and therapeutic fields. These agents have been studied extensively so far to reveal their optimal physicochemical properties including the effects of ligands and their density on the surface of NPs. This article was conducted through a computational approach (all-atom molecular dynamics simulations) to predict the stability of NPs based on a poly-lactic-co-glycolic acid (PLGA) hydrophobic core with a poly-ethylene glycol (PEG) hydrophilic shell and varying numbers of riboflavin (RF) molecules as ligands. Depending on the molecular weight of the polymers, the most stable composition of NPs was achieved at 20 wt% and 10 wt% PLGA-PEG-RF for PLGA3kDa-PEG2kDa and PLGA4.5kDa-PEG2kDa polymers, respectively. According to the simulations, riboflavin molecules were located on the surface of the NPs, which would indicate that riboflavin-bound PLGA-PEG NPs could be efficiently utilized for active targeting purposes. To scrutinize the simulation results, NPs with riboflavin ligands were synthesized and put into in vitro experiments. Outstandingly, the empirical outcomes revealed that the hydrodynamic sizes of NPs also met minimum points at 20 and 10 wt% for PLGA3kDa-PEG2kDa and PLGA4.5kDa-PEG2kDa, respectively. Moreover, similar trends in the gyration radius as a function of riboflavin content were observed in the simulation analysis and the experimental results, which would indicate that the method of molecular dynamics (MD) simulation is a reliable mathematical technique and could be applied for predicting the physicochemical properties of NPs.

Vesicles as antibiotic carrier: State of art

Antimicrobial resistance (AMR) has become a global health problem. Bacteria are able to adapt to different environments, with the presence or absence of a host, forming colonies and biofilms. In fact, biofilm formation confers chemical protection to the microbial cells, thus making most of the conventional antibiotics ineffective. Prevention and destruction of biofilms is a challenging task that should be addressed by a multidisciplinary approach from different research fields. One of the medical strategies used against biofilms is the therapy with drug delivery systems. Lipidic nanovesicles are a good choice for encapsulating drugs, increasing their pharmacodynamics and reducing side effects. These soft nanovesicles show significant advantages for their high biocompatibility, physical and chemistry properties, good affinity with drugs, and easy route of administration. This review summarizes the current knowledge on different types of vesicles which may be used as antibiotic carriers. The main preparation and purification methods for the synthesis of these vesicles are also presented. The advantages of drug encapsulation are critically reviewed. In addition, recent works on endolysin formulations as novel, "greener" and efficient antibiofilm solution are included. This paper can provide useful background for the design of novel efficient formulations and synergistic nanomaterials and could be also useful at the pharmaceutical industry to develop wastewater treatments and reduce the antibiotics in the environmental waters.

Modulation of protein release from penta-block copolymer microspheres

Releasing a protein according to a zero-order profile without protein denaturation during the polymeric microparticle degradation process is very challenging. The aim of the current study was to develop protein-loaded microspheres with new PLGA based penta-block copolymers for a linear sustained protein release. Lysozyme was chosen as model protein and 40 µm microspheres were prepared using the solid-in-oil-in-water solvent extraction/evaporation process. Two types of PLGA-P188-PLGA penta-block copolymers were synthetized with two PLGA-segments molecular weight (20 kDa or 40 kDa). The resulting microspheres (50P20-MS and 50P40-MS) had the same size, an encapsulation efficiency around 50-60% but different porosities. Their protein release profiles were complementary: linear but non complete for 50P40-MS, non linear but complete for 50P20-MS. Two strategies, polymer blending and microsphere mixing, were considered to match the release to the desired profile. The (1:1) microsphere mixture was successful. It induced a bi-phasic release with a moderate initial burst (around 13%) followed by a nearly complete linear release for 8 weeks. This study highlighted the potential of this penta-block polymer where the PEO block mass ratio influence clearly the Tg and consequently the microsphere structure and the release behavior at 37 °C. The (1:1) mixture was a starting point but could be finely tuned to control the protein release.

Mitoxantrone as photothermal agents for ultrasound/fluorescence imaging-guided chemo-phototherapy enhanced by intratumoral H2O2-Induced CO

Multimodal imaging integrated theranostic nanomaterials provides broad prospects for noninvasive and precise cancer treatment. However, the uncertain physiological metabolism of the existing phototherapy nanoagents greatly prevents its clinical application. Herein, a smart nanoplatform based on clinically chemotherapeutic drugs mitoxantrone (MTO) was prepared to realize ultrasound/fluorescence imaging-guided chemo-photothermal combined therapy. The nanoplatform encapsulating MTO and manganese carbonyl (MnCO), which denoted as MCMA NPs, could accumulate at tumor sites by enhanced permeability and retention (EPR) effect and effectively induce cell apoptosis. MTO with near-infrared absorption (~676 nm) not only acted as chemotherapy drug, but also served as photothermal reagent with high photothermal conversion efficiency (ƞ = 42.2%). Especially, H₂O₂ in tumor sites and the photothermal effect of MTO could trigger MnCO to generate CO, which made cancer cells more sensitive to MTO and significantly alleviated cell resistance. Simultaneously, CO released in tumor also could act as contrast agent for tumor ultrasound imaging to provide accurate guidance for anticancer treatment. Moreover, MCMA NPs could further promote oxidative stress damage in mitochondria and protect normal cells from side effects of chemotherapy. Both in vivo and in vitro studies indicated that MCMA NPs possessed excellent synergetic tumor inhibition ability with high efficiency and low chemotherapy resistance.

Resolvin E1 is a pro-repair molecule that promotes intestinal epithelial wound healing

Resolution of intestinal inflammation and wound repair are active processes that mediate epithelial healing at mucosal surfaces. Lipid molecules referred to as specialized proresolving mediators (SPMs) play an important role in the restorative response. Resolvin E1 (RvE1), a SPM derived from omega-3 fatty acids, has been reported to dampen intestinal inflammation by promoting anti-inflammatory responses including increased neutrophil spherocytosis and macrophage production of IL-10. Despite these observations, a role for RvE1 in regulating intestinal epithelial cell migration and proliferation during mucosal wound repair has not been explored. Using an endoscopic biopsy-based wound healing model, we report that RvE1 is locally produced in response to intestinal mucosal injury. Exposure of intestinal epithelial cells to RvE1 promoted wound repair by increasing cellular proliferation and migration through activation of signaling pathways including CREB, mTOR, and Src-FAK. Additionally, RvE1-triggered activation of the small GTPase Rac1 led to increased intracellular reactive oxygen species (ROS) production, cell-matrix adhesion, and cellular protrusions at the leading edge of migrating cells. Furthermore, in situ administration of RvE1-encapsulated synthetic targeted polymeric nanoparticles into intestinal wounds promoted mucosal repair. Together, these findings demonstrate that RvE1 functions as a prorepair lipid mediator by increasing intestinal epithelial cell migration and proliferation, and highlight potential therapeutic applications for this SPM to promote mucosal healing in the intestine.

Systemic Review of Biodegradable Nanomaterials in Nanomedicine

BACKGROUND

Nanomedicine is a field of science that uses nanoscale materials for the diagnosis and treatment of human disease. It has emerged as an important aspect of the therapeutics, but at the same time, also raises concerns regarding the safety of the nanomaterials involved. Recent applications of functionalized biodegradable nanomaterials have significantly improved the safety profile of nanomedicine.

OBJECTIVE

Our goal is to evaluate different types of biodegradable nanomaterials that have been functionalized for their biomedical applications.

METHOD

In this review, we used PubMed as our literature source and selected recently published studies on biodegradable nanomaterials and their applications in nanomedicine.

RESULTS

We found that biodegradable polymers are commonly functionalized for various purposes. Their property of being naturally degraded under biological conditions allows these biodegradable nanomaterials to be used for many biomedical purposes, including bio-imaging, targeted drug delivery, implantation and tissue engineering. The degradability of these nanoparticles can be utilized to control cargo release, by allowing efficient degradation of the nanomaterials at the target site while maintaining nanoparticle integrity at off-target sites.

CONCLUSION

While each biodegradable nanomaterial has its advantages and disadvantages, with careful design and functionalization, biodegradable nanoparticles hold great future in nanomedicine.

Oral Delivery of Biologics for Precision Medicine

The emerging field of precision medicine is rapidly growing, fostered by the advances in genome mapping and molecular diagnosis. In general, the translation of these advances into precision treatments relies on the use of biological macromolecules, whose structure offers a high specificity and potency. Unfortunately, due to their complex structure and limited ability to overcome biological barriers, these macromolecules need to be administered via injection. The scientific community has devoted significant effort to making the oral administration of macromolecules plausible thanks to the implementation of drug delivery technologies. Here, an overview of the current situation and future prospects in the field of oral delivery of biologics is provided. Technologies in clinical trials, as well as recent and disruptive delivery systems proposed in the literature for local and systemic delivery of biologics including peptides, antibodies, and nucleic acids, are described. Strategies for the specific targeting of gastrointestinal regions-stomach, small bowel, and colon-cell populations, and internalization pathways, are analyzed. Finally, challenges associated with the clinical translation, future prospects, and identified opportunities for advancement in this field are also discussed.

Perspectives on the future of multi-dimensional platforms

Two-dimensional liquid chromatography (2D-LC) formats have emerged to help address separation problems that are too complex for conventional one-dimensional LC. There are a number of obstacles to the proliferation of 2D-LC that are gradually being removed. Reliable commercial instrumentation has become available and data analysis software is being improved. Detector-sensitivity and phase-system compatibility issues can largely be solved by using active-modulation strategies. The remaining challenge, developing good and fast 2D-LC methods within a reasonable time, may be solved with smart algorithms. The technology platform that has been developed for 2D-LC also creates a number of other possibilities. Between the two separation stages, all kinds of physical (e.g. dissolution) or chemical (e.g. enzymatic or light-induced degradation) processes can be made to take place, allowing a wide variety of experiments to be performed within a single, efficient and automated analysis. All these developments are discussed in this paper and a number of critical issues are identified. A practical example, the characterization of polysorbates by high-resolution comprehensive two-dimensional liquid chromatography in combination with high-resolution mass spectrometry, is described as a culmination of recent developments in 2D-LC and as an illustration of the current state of the art.

Improved Therapeutic Effect of Puerarin-Encapsulated PEG-PLGA Nanoparticle on an In Vitro Cerebral Infarction Model

This study was to explore the therapeutic effect and mechanism of puerarin (PUE) combined with PEGylated nanoparticles on a rat cerebral infarction cell model. In this context, PEG-PLGA/PUE nanoparticles were prepared by the thin-film hydration method, and the toxicity of PEG-PLGA/PUE nanoparticles to brain capillary endothelial cell (BCEC) was detected by MTT. The BCEC/TF cell model was obtained by induction of BCEC cells with TNF-α. The BCEC/TF cell model was identified by immunofluorescence; the protein expression was detected by western blotting; the expression level of miR-424 in cells was measured by RT-qPCR; the targeting relationship between miR-424 and PDCD4 was confirmed by dual-luciferase reporter assay. We found that PEG-PLGA/PUE nanoparticles prepared by the thin-film hydration method had uniform particle size, regular shape, and good stability and were not toxic to cells. The vWF was widely expressed in the cytoplasm in BCECs. The BCEC/TF cell model was obtained after TNF-α treatment, and tissue factor (TF) was widely expressed on the cell membrane of BCEC/TF cells. Furthermore, it was observed that the PEG-PLGA/PUE nanoparticles showed better therapeutic effect on the BCEC/TF cell model than PUE. PEG-PLGA/PUE nanoparticles and PUE inhibited the expression of PDCD4 protein by increasing the expression of miR-424 in BCEC/TF cells. In summary, the therapeutic effect of PEG-PLGA/PUE nanoparticles on the in vitro cell model of cerebral infarction is better than that of PUE. Moreover, PEG-PLGA/PUE inhibits the expression of PDCD4 protein by lowering the expression level of miR-424 in cells, thereby reducing the hazard of cerebral infarction.

Dual oligopeptides modification mediates arsenic trioxide containing nanoparticles to eliminate primitive chronic myeloid leukemia cells inside bone marrow niches

Chronic myeloid leukemia (CML) is one type of hematopoietic stem cell diseases. Although BCR-ABL1 tyrosine kinase inhibitors are remarkably effective in inducing remission in chronic phase patients, they are not curative in a majority of patients due to their failure to eradicate residual CML stem/progenitor cells, which reside in bone marrow niches. Here, we presented novel dual oligopeptides-conjugated nanoparticles and demonstrated their effective delivery of arsenic trioxide in bone marrow niches for the elimination of primitive CML cells. We encapsulated As-Ni transitional metal compounds into polymeric nanoparticles based on the reverse micelle rationale. The loading density and stability of arsenic trioxide in nanoparticles were improved. In vitro experiments demonstrated that dual oligopeptides conjugated nanoparticles could deliver arsenic trioxide into bone marrow niches including endosteal niches and vascular niches. The colony-forming activity of CML cells was remarkably restrained in the presence of metaphyseal bone fragments pre-incubated with bone marrow niche targeted arsenic nanoparticles. The in vitro vascular niche model suggested that CML cell proliferation was also successfully inhibited through a tight contact with HUVECs, which were pre-treated using niche-targeted arsenic nanoparticles. This bone marrow niche targeted delivery strategy has a potential usage for the treatment of CML and other malignant hematologic disorders originated from the bone marrow.

The Design of Poly(lactide-co-glycolide) Nanocarriers for Medical Applications

Polymeric biomaterials have found widespread applications in nanomedicine, and poly(lactide-co-glycolide), (PLGA) in particular has been successfully implemented in numerous drug delivery formulations due to its synthetic malleability and biocompatibility. However, the need for preconception in these formulations is increasing, and this can be achieved by selection and elimination of design variables in order for these systems to be tailored for their specific applications. The starting materials and preparation methods have been shown to influence various parameters of PLGA-based nanocarriers and their implementation in drug delivery systems, while the implementation of computational simulations as a component of formulation studies can provide valuable information on their characteristics. This review provides a critical summary of the synthesis and applications of PLGA-based systems in bio-medicine and outlines experimental and computational design considerations of these systems.

Preparation and Characterization of PLGA-PEG-PLGA Nanoparticles Containing Salidroside and Tamoxifen for Breast Cancer Therapy

Nanoparticles (NPs) containing the hydrophilic drug salidroside (Sal) and the hydrophobic drug tamoxifen (Tam) were prepared using a triblock copolymer poly(lactic-co-glycolic acid) (PLGA)-poly(ethylene glycol) (PEG)-PLGA to achieve synergism in the treatment of breast cancer. The double emulsion (w/o/w) method was used to prepare Sal-Tam NPs with an average particle size of 275.3 ± 44.0 nm, a polydispersity index of 0.302 ± 0.102, and a zeta potential of - 6.98 ± 2.99. The entrapment efficiency of the hydrophilic and hydrophobic components was 32.63% ± 0.73% and 49.18% ± 3.04%, respectively. On differential scanning calorimetry, the NPs showed the amorphous nature of both Sal and Tam. The sustained release of Sal and Tam from the NPs was significantly prolonged under physiological conditions (pH 7.4). The CCK-8 assay using the 4T1 cell line revealed a 1.7-fold decrease in the IC₅₀ value for Sal-Tam NPs when compared with free Tam. The in vivo anti-tumor effect was assessed in BALB/c mice, and the results demonstrated that these NPs decreased the tumor volume compared with saline and showed high anti-tumor activity. A pharmacokinetic study showed significant enhancement of the bioavailability of Tam in Sal-Tam NPs compared with free Tam in suspension. The intracellular and mitochondrial anti-oxidative effect of Sal was thought to be attributed to the promising anti-tumor effect of drug co-delivery. This study confirmed that the use of Sal-Tam NPs may be a promising approach in breast cancer therapy.

Conjugated polymers as nanoparticle probes for fluorescence and photoacoustic imaging

In this review, the role of conjugated polymer nanoparticles (CPNs) in emerging bioimaging techniques is described.

An organocatalytic ring-opening polymerization approach to highly alternating copolymers of lactic acid and glycolic acid

Highly regioselective ring-opening polymerization of optically active methylglycolides was achived using P₂-t-Bu/alcohol system to produce alternating copolymer of lactic acid and glycolic acid.

In Vivo Optical Performance of a New Class of Near-Infrared-Emitting Conjugated Polymers: Borylated PF8-BT

Borylated poly(fluorene-benzothiadiazoles) (PF8-BT) are π-conjugated polymers (CPs) with deep-red/near-infrared (NIR) absorption and emission profiles suitable for in vivo optical imaging. A fully borylated PF8-BT derivative (P4) was encapsulated in pegylated poly(lactic-co-glycolic acid) (PEG-PLGA) nanoparticles and compared with a reference NIR-emitting CP (PCPDTBT) or indocyanine green (ICG). All formulations satisfied quality requirements for parenterally administered diagnostics. P4 nanoparticles had higher quantum yield (2.3%) than PCPCDTBT (0.01%) or ICG nanoparticles (1.1%). The signal/background ratios (SBRs) of CP systems P4 and PCPDTBT in a phantom mouse (λ_em = 820 nm) increased linearly with fluorophore mass (12.5-100 μg/mL), while the SBRs of ICG decreased above 25 μg/mL. P4 nanoparticles experienced <10% photobleaching over 10 irradiations (PCPDTBT: ∼25% and ICG: >44%). In a mouse tumor xenograft model, P4 nanoparticles showed a 5-fold higher SBR than PCPDTBT particles with fluorophore accumulation in the liver > spleen > tumor. Blood chemistry and tissue histology showed no abnormalities compared to untreated animals after a single administration.

Structures and Applications of Thermoresponsive Hydrogels and Nanocomposite-Hydrogels Based on Copolymers with Poly (Ethylene Glycol) and Poly (Lactide-Co-Glycolide) Blocks

Thermoresponsive hydrogels showing biocompatibility and degradability have been under intense investigation for biomedical applications, especially hydrogels composed of hydrophilic poly(ethylene glycol) (PEG) and hydrophobic poly(lactic acid-co-glycolic acid) (PLGA) as first-line materials. Even though various aspects such as gelation behavior, degradation behavior, drug-release behavior, and composition effect have been studied for 20 years since the first report of these hydrogels, there are still many outputs on parameters affecting their gelation, structure, and application. In this review, the current trends of research on linear block copolymers composed of PEG and PLGA during the last 5 years (2014-2019) are summarized. In detail, this review stresses newly found parameters affecting thermoresponsive gelation, findings from structural analysis by simulation, small-angle neutron scattering (SANS), etc., progress in biomedical applications including drug delivery systems and regeneration medicine, and nanocomposites composed of block copolymers with PEG and PLGA and nanomaterials (laponite).

TMTP1-modified Indocyanine Green-loaded Polymeric Micelles for Targeted Imaging of Cervical Cancer and Metastasis Sentinel Lymph Node in vivo

Metastasis is one of the most threatening aspects of cervical cancer. We developed a method to intraoperatively map the primary tumor, metastasis and metastatic sentinel lymph nodes (SLNs), providing real-time intraoperative guidance in cervical cancer.

Methods: TMTP1, a tumor metastasis targeting peptide, was employed to modify the indocyanine green (ICG)-loaded poly (ethylene glycol)- poly (lactic-co-glycolic acid) (PEG-PLGA) micelles. The cervical cancer subcutaneous tumor model and lung metastasis model were established to determine the active targeting of ICG-loaded TMTP1-PEG-PLGA micelles (ITM) for the primary tumor and occult metastasis of cervical cancer. Human cervical cancer HeLa cells engineered by firefly luciferase were injected into the right hocks of BALB/c nude mice to develop the SLN metastasis model. The ITM and control ICG-loaded PEG-PLGA micelles (IM) were injected into the right hind footpads in the SLN metastasis model, and the migration and retention of micelles were recorded under near-infrared fluorescence. K14-HPV16 transgenic mice were also used to detect the image capability of ITM to target cancerous lesions.

Results: ITM could actively target imaging of the primary tumor and cervical cancer metastasis. ITM quickly diffused from the injection site to SLNs along lymphatic capillaries and remained in the SLNs for 12 h. Moreover, ITM specifically accumulated in the tumor metastatic SLNs (T-SLNs), which could be successfully distinguished from normal SLNs (N-SLNs).

Conclusion: ITM could achieve active targeting of the primary tumor, metastasis and T-SLNs, providing precise and real-time intraoperative guidance for cervical cancer.

Maleimide-functionalised PLGA-PEG nanoparticles as mucoadhesive carriers for intravesical drug delivery

Low permeability of the urinary bladder epithelium, poor retention of the chemotherapeutic agents due to dilution and periodic urine voiding as well as intermittent catheterisations are the major limitations of intravesical drug delivery used in the treatment of bladder cancer. In this work, maleimide-functionalised poly(lactide-co-glycolide)-block-poly(ethylene glycol) (PLGA-PEG-Mal) nanoparticles were developed. Their physicochemical characteristics, including morphology, architecture and molecular parameters have been investigated by means of dynamic light scattering, transmission electron microscopy and small-angle neutron scattering techniques. It was established that the size of nanoparticles was dependent on the solvent used in their preparation and molecular weight of PEG, for example, 105 ± 1 nm and 68 ± 1 nm particles were formed from PLGA_20K-PEG_5K in dimethyl sulfoxide and acetone, respectively. PLGA-PEG-Mal nanoparticles were explored as mucoadhesive formulations for drug delivery to the urinary bladder. The retention of fluorescein-loaded nanoparticles on freshly excised lamb bladder mucosa in vitro was evaluated and assessed using a flow-through fluorescence technique and Wash Out₅₀ (WO₅₀) quantitative method. PLGA-PEG-Mal nanoparticles (NPs) exhibited greater retention on urinary bladder mucosa (WO₅₀ = 15 mL) compared to maleimide-free NPs (WO₅₀ = 5 mL). The assessment of the biocompatibility of PEG-Mal using the slug mucosal irritation test revealed that these materials are non-irritant to mucosal surfaces.

Polymer-based nanoparticles for chemo/gene-therapy: Evaluation its therapeutic efficacy and toxicity against colorectal carcinoma

Combination treatment through simultaneous delivery of anticancer drugs and gene with nano-formulation has been demonstrated to be an elegant and efficient approach for colorectal cancer therapy. Recently, sorafenib being studied in combination therapy in colorectal cancer (CRC) attracted attention of researchers. On the basis of our previous study, pigment epithelium-derived factor (PEDF) loaded nanoparticles showed good effect on CRC in vitro and in vivo. Herein, we designed a combination therapy for sorafenib (Sora), a multi-kinase inhibitor and PEDF, a powerful antiangiogenic gene, in a nano-formulation aimed to increase anti-tumor effect on CRC for the first time. Sora and PEDF were simultaneously encapsulated in PEG-PLGA based nanoparticles by a modified double-emulsion solvent evaporation method. The obtained co-encapsulated nanoparticles (Sora@PEDF-NPs) showed high entrapment efficiency of both Sora and PEDF - and exhibited a uniform spherical morphology. The release profiles of Sora and PEDF were in a sustained manner. The most effective tumor growth inhibition in the C26 cells and C26-bearing mice was observed in the Sora@PEDF-NPs in comparison with none-drug nanoparticles, free Sora, mono-drug nanoparticles (Sora-NPs and PEDF-NPs) and the mixture of Sora-NPs and equivalent PEDF-NPs (Mix-NPs). More importantly, Sora@PEDF-NPs showed lower toxicity than free Sora in mice according to the acute toxicity test. The serologic biochemical analysis and mice body weight during therapeutic period revealed that Sora@PEDF-NPs had no obvious toxicity. All the data demonstrated that the simultaneously loaded nanoparticles with multi-kinase inhibitor and anti-angiogenic gene might be one of the most potential formulations in the treatment of colorectal carcinoma in clinic and worthy of further investigation.

Assessment of the Effect of PLGA Co-polymers and PEG on the Formation and Characteristics of PLGA-PEG-PLGA Co-block Polymer Using Statistical Approach

Purpose: To assess the effect of the lactic acid (LA)-to-glycolic acid (GA) molar ratio and polyethylene glycol (PEG) concentration on the formation of poly-lactide co-glycolide acid (PLGA)-PEG-PLGA co-block polymers simultaneously using statistical approach. Methods: A 22 full factorial design with the addition of a point in the center of the design, namely curvature, was applied. Fourier transform infrared (FTIR), differential scanning calorimetry (DSC), and nuclear magnetic resonance (NMR) were performed to confirm the formation of the co-block polymer. Simvastatin (SMV), a drug model was incorporated into the nano-polymeric micellar (NpM) of PLGA-PEG-PLGA followed by solubility phase, particle size, zeta potential, and entrapment efficiency characterizations. Results: FTIR, DSC, and NMR successfully confirmed the formation of co-block polymers. Solubility of SMV increased from 2 to 44-folds depending on co-block concentration with entrapment efficiency of 59%-80%. The NpM had size in the range of 206 to 402 nm with negative zeta potential. LA to GA ratio had greater effect on particle size reduction and increasing of co-polymer length. In addition, it had higher contributions on increasing of solubility and entrapment efficiency of SMV than PEG. Conclusion: According to these findings, the LA to GA ratio and PEG concentration gained a great consideration in order to prepare the PLGA-PEG-PLGA co-block which fulfilled the quality target product profile of NpM delivery system.

Low molecular weight PEG-PLGA polymers provide a superior matrix for conjugated polymer nanoparticles in terms of physicochemical properties, biocompatibility and optical/photoacoustic performance

The near-infrared absorbing conjugated polymer poly[2,6-(4,4-bis-(2-ethylhexyl)-4H-cyclopenta[2,1-b;3,4-b']-dithiophene)-alt-4,7-(2,1,3-benzothiadiazole)] (PCPDTBT) has been investigated as a contrast agent for optical and photoacoustic imaging. Lipophilic π-conjugated polymers can be efficiently encapsulated within self-assembling diblock copolymer poly(ethylene glycol) methyl ether-block-poly(lactide-co-glycolide) (PEG-PLGA) nanoparticles, although the effect of variations in PEG and PLGA chain lengths on nanoparticle properties, performance and biocompatibility have not yet been investigated. In this study, PEG-PLGA with different block lengths (PEG_2kDa-PLGA_4kDa, PEG_2kDa-PLGA_15kDa and PEG_5kDa-PLGA_55kDa) were used to encapsulate PCPDTBT. Nanoparticle sizes were smallest (<100 nm) when using PEG_2kDa-PLGA_4kDa, with <5% PCPDTBT content and a reduction in the total solids concentration of the organic phase. All PEG-PLGA nanoparticles were colloidally stable in water and serum-supplemented cell culture medium over 24 h at 37 °C, with slight evidence of protein surface adsorption. PEG_2kDa-PLGA_4kDa systems showed a threefold lower cytotoxicity (IC₅₀ value) than the other two systems. Haemolytic activity was <2.5% for all systems and no platelet aggregation or inhibition of ADP-induced platelet aggregation was observed. Encapsulation of PCPDTBT within a PEG-PLGA matrix shifted fluorescence emission towards red wavelengths (760 nm in THF vs. 840 nm in nanoparticles) and reduced the quantum yield by 30-70-fold compared to THF. Nonetheless, PCPDTBT:PEG_2kDa-PLGA_4kDa systems had a marginally higher quantum yield and signal-to-background ratio in a phantom mouse compared with PEG_2kDa-PLGA_15kDa and PEG_5kDa-PLGA_55kDa systems. As a photoacoustic imaging probe, PCPDTBT:PEG_2kDa-PLGA_4kDa systems also showed a higher photoacoustic amplitude compared to higher molecular weight PEG-PLGA systems. Overall, the low molecular weight PEG_2kDa-PLGA_4kDa nanoparticle systems conferred the benefits of smaller sizes, reduced cytotoxicity and enhanced imaging performance compared to higher molecular weight matrix polymers.

PEG-Derivatized Dual-Functional Nanomicelles for Improved Cancer Therapy

Polymeric micelles have attracted considerable attention for effective delivery of poorly water-soluble cancer drugs. Polyethylene glycol (PEG), which has been approved for human use by the US Food and Drug Administration, is the most commonly used hydrophilic component of polymeric micelles because it is biocompatible and biodegradable. One disadvantage of traditional polymeric micelles is that they include a large amount of inert carrier materials, which do not contribute to therapeutic activity but increase cost and toxicity risk. A better alternative may be "dual-functional" micellar carriers, in which the hydrophobic carrier material (conjugated to PEG) has intrinsic therapeutic activity that complements, or even synergizes with, the antitumor activity of the drug cargo. This review summarizes recent progress in the development of PEG-derivatized dual-functional nanomicelles and surveys the evidence of their feasibility and promise for cancer therapy.

Fabrication of redox-responsive Bi(mPEG-PLGA)-Se2 micelles for doxorubicin delivery

Stimuli-responsive polymeric nanostructures have emerged as potential drug carriers for cancer therapy. Herein, we synthesized redox-responsive diselenide bond containing amphiphilic polymer, Bi(mPEG-PLGA)-Se₂ from mPEG-PLGA and 3,3'-diselanediyldipropanoic acid (DSeDPA) using DCC/DMAP as coupling agents. Due to its amphiphilic nature, Bi(mPEG-PLGA)-Se₂ self-assembled in to stable micelles in aqueous solution with a hydrodynamic size of 123.9 ± 0.85 nm. The Bi(mPEG-PLGA)-Se₂ micelles exhibited DOX-loading content (DLC) of 6.61 wt% and encapsulation efficiency (EE) of 54.9%. The DOX-loaded Bi(mPEG-PLGA)-Se₂ micelles released 73.94% and 69.54% of their cargo within 72 h upon treatment with 6 mM GSH and 0.1% H₂O₂, respectively, at pH 7.4 and 37 °C. The MTT assay results demonstrated that Bi(mPEG-PLGA)-Se₂ was devoid of any inherent toxicity and the DOX-loaded micelles showed pronounced antitumor activities against HeLa cells, 44.46% of cells were viable at maximum dose of 7.5 µg/mL. The cellular uptake experiment further confirmed the internalization of DOX-loaded Bi(mPEG-PLGA)-Se₂ micelles and endowed redox stimuli triggered drug release in cytosol and nuclei of cancer cells. Overall, the results suggested that the smart, biocompatible Bi(mPEG-PLGA)-Se₂ copolymer could serve as potential drug delivery biomaterial for the controlled release of hydrophobic drugs in cancer cells.

A Multifunctional Wearable Device with a Graphene/Silver Nanowire Nanocomposite for Highly Sensitive Strain Sensing and Drug Delivery

Advances in wearable, highly sensitive and multifunctional strain sensors open up new opportunities for the development of wearable human interface devices for various applications such as health monitoring, smart robotics and wearable therapy. Herein, we present a simple and cost-effective method to fabricate a multifunctional strain sensor consisting of a skin-mountable dry adhesive substrate, a robust sensing component and a transdermal drug delivery system. The sensor has high piezoresisitivity to monitor real-time signals from finger bending to ulnar pulse. A transdermal drug delivery system consisting of polylactic-co-glycolic acid nanoparticles and a chitosan matrix is integrated into the sensor and is able to release the nanoparticles into the stratum corneum at a depth of ~60 µm. Our approach to the design of multifunctional strain sensors will lead to the development of cost-effective and well-integrated multifunctional wearable devices.

Microgels in biomaterials and nanomedicines

Microgels are colloidal particles with crosslinked polymer networks and dimensions ranging from tens of nanometers to micrometers. Specifically, smart microgels are fascinating capable of responding to biological signals in vivo or remote triggers and making the possible for applications in biomaterials and biomedicines. Therefore, how to fundamentally design microgels is an urgent problem to be solved. In this review, we put forward our important fundamental opinions on how to devise the intelligent microgels for cancer therapy, biosensing and biological lubrication. We focus on the design ideas instead of specific implementation process by employing reverse synthesis analysis to programme the microgels at the original stage. Moreover, special insights will be, for the first time, as far as we know, dedicated to the particles completely composed of DNA or proteins into microgel systems. These are discussed in detail in this review. We expect to give readers a broad overview of the design criteria and practical methodologies of microgels according to the application fields, as well as to propel the further developments of highly interesting concepts and materials.

Drug loading augmentation in polymeric nanoparticles using a coaxial turbulent jet mixer: Yong investigator perspective

HYPOTHESIS

In conventional 'bulk' nanoprecipitation, the capacity to load hydrophobic drugs into the polymeric nanoparticles (NPs) is limited to about 1%. The size distribution of the resulting NPs becomes polydisperse when higher precursor concentration is used to increase the drug loading. Hence, it should be possible to enhance the hydrophobic drug loading in polymeric NPs while maintaining the uniform NP size distribution by optimizing the nanoprecipitation process and purification process.

EXPERIMENTS

Systematic studies were performed to enhance the loading of docetaxel (Dtxl) by using a process of centrifugal spin-down, rapid mixing by turbulence, and addition of co-solvent. The size distributions and Dtxl loading of the NPs were measured using dynamic light scattering and HPLC, respectively.

FINDINGS

The centrifugal spin-down process helps to maintain uniform size distribution even at the high precursor concentration. In bulk nanoprecipitation, the resulting NPs achieved Dtxl loading up to 3.2%. By adopting turbulence for rapid mixing, the loading of Dtxl increased to 4.4%. By adding hexane as co-solvent, the loading of Dtxl further increased to 5.5%. Because of the drug loading augmentation, high degree of control, and extremely high production rate, the developed method may be useful for industrial-scale production of personalized nanomedicines by nanoprecipitation.

Multifunctional nanocarriers for the treatment of periodontitis: Immunomodulatory, antimicrobial, and regenerative strategies

Periodontitis is an inflammatory disease, in which the host immuno-inflammatory response against the dysbiotic subgingival biofilm leads to the breakdown of periodontal tissues. Most of the available treatments seem to be effective in the short-term; nevertheless, permanent periodical controls and patient compliance compromise long-term success. Different strategies have been proposed for the modulation of the host immune response as potential therapeutic tools to take a better care of most susceptible periodontitis patients, such as drug local delivery approaches. Though, maintaining an effective drug concentration for a prolonged period of time has not been achieved yet. In this context, advanced drug delivery strategies using biodegradable nanocarriers have been proposed to avoid toxicity and frequency-related problems of treatment. The versatility of distinct nanocarriers allows the improvement of their loading and release capabilities and could be potentially used for microbiological control, periodontal regeneration, and/or immunomodulation. In the present review, we revise and discuss the most frequent biodegradable nanocarrier strategies proposed for the treatment of periodontitis, including polylactic-co-glycolic acid (PLGA), chitosan, and silica-derived nanoparticles, and further suggest novel therapeutic strategies.

Microfluidic assisted synthesis of PLGA drug delivery systems

Poly(lactic-co-glycolic acid) (PLGA) is a biocompatible and biodegradable polymer that recently attracted attention for use as part of drug delivery systems (DDS). In this context, there is an emerging need for a rapid, reliable and reproducible method of synthesis. Here, microfluidic systems provide great opportunities for synthesizing carriers in a tightly controlled manner and with low consumption of materials, energy and time. These miniature devices have been the focus of recent research since they can address the challenges inherent to the bulk system, e.g. low drug loading efficiency and encapsulation, broad size distribution and burst initial release. In this article, we provide an overview of current microfluidic systems used in drug delivery production, with a special focus on PLGA-based DDS. In this context, we highlight the advantages associated with the use of microchip systems in the fabrication of nanoparticles (NPs) and microparticles (MPs), e.g. in achieving complex morphologies. Furthermore, we discuss the challenges for selecting proper microfluidics for targeted DDS production in a translational setting and introduce strategies that are used to overcome microfluidics shortcomings, like low throughput for production.

Poly(lactic-co-glycolic acid) (PLGA) is a biocompatible and biodegradable polymer that recently attracted attention for use as part of drug delivery systems (DDS).