Characterization of synthetic polymers by MALDI-MS

MALDI-TOF MS Imaging evidences spatial differences in the degradation of solid polycaprolactone diol in water under aerobic and denitrifying conditions

Degradation of solid polymers in the aquatic environment encompasses a variety of biotic and abiotic processes giving rise to heterogeneous patterns across the surface of the material, which cannot be investigated using conventional Matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF-MS) that only renders an "average" picture of the sample. In that context, MALDI-TOF MS Imaging (MALDI MSI) provides a rapid and efficient tool to study 2D spatial changes occurred in the chemical composition of the polymer surface. Commercial polycaprolactone diol (average molecular weight of 1250Da) was selected as test material because it had been previously known to be amenable to biological degradation. The test oligomer probe was incubated under aerobic and denitrifying conditions using synthetic water and denitrifying mixed liquor obtained from a wastewater treatment plant respectively. After ca. seven days of exposure the mass spectra obtained by MALDI MSI showed the occurrence of chemical modifications in the sample surface. Observed heterogeneity across the probe's surface indicated significant degradation and suggested the contribution of biotic processes. The results were investigated using different image processing tools. Major changes on the oligomer surface were observed when exposed to denitrifying conditions.

Characterization of Synthetic Peptides by Mass Spectrometry

Mass spectrometry (MS) is well suited for analysis of the identity and purity of synthetic peptides. The sequence of a synthetic peptide is most often known, so the analysis is mainly used to confirm the identity and purity of the peptide. Here, simple procedures are described for MALDI-TOF-MS and LC-MS of synthetic peptides.

Independent assessment of matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) sample preparation quality: A novel statistical approach for quality scoring

Preparation of samples according to an optimized method is crucial for accurate determination of polymer sample characteristics by Matrix-Assisted Laser Desorption Ionization (MALDI) analysis. Sample preparation conditions such as matrix choice, cationization agent, deposition technique or even the deposition volume should be chosen to suit the sample of interest. Many sample preparation protocols have been developed and employed, yet finding the optimal sample preparation protocol remains a challenge. Because an objective comparison between the results of diverse protocols is not possible, "gut-feeling" or "good enough" is often decisive in the search for an optimum. This implies that sub-optimal protocols are used, leading to a loss of mass spectral information quality. To address this problem a novel analytical strategy based on MALDI imaging and statistical data processing was developed in which eight parameters were formulated to objectively quantify the quality of sample deposition and optimal MALDI matrix composition and finally sum up to an overall quality score of the sample deposition. These parameters can be established in a fully automated way using commercially available mass spectrometry imaging instruments without any hardware adjustments. With the newly developed analytical strategy the highest quality MALDI spots were selected, resulting in more reproducible and more valuable spectra for PEG in a variety of matrices. Moreover, our method enables an objective comparison of sample preparation protocols for any analyte and opens up new fields of investigation by presenting MALDI performance data in a clear and concise way.

Synthesis of Dendronized Poly(l-Glutamate) via Azide-Alkyne Click Chemistry

Poly(l-glutamate) (PGlu) was modified with a second-generation dendron to obtain the dendronized polyglutamate, P(Glu-D). Synthesized P(Glu-D) exhibited a degree of polymerization (DP_n) of 46 and a 43% degree of dendronization. Perfect agreement was found between the P(Glu-D) expected structure and the results of nuclear magnetic resonance spectroscopy (NMR) and size-exclusion chromatography coupled to a multi-angle light-scattering detector (SEC-MALS) analysis. The PGlu precursor was modified by coupling with a bifunctional building block (N₃-Pr-NH₂) in the presence of 4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium chloride (DMTMM) coupling reagent. The second-generation polyamide dendron was prepared by a stepwise procedure involving the coupling of propargylamine to the l-lysine carboxyl group, followed by attaching the protected 2,2-bis(methylol)propionic acid (bis-MPA) building block to the l-lysine amino groups. The hydroxyl groups of the resulting second-generation dendron were quantitatively deprotected under mild acidic conditions. The deprotected dendron with an acetylene focal group was coupled to the pendant azide groups of the modified linear copolypeptide, P(Glu-N₃), in a Cu(I) catalyzed azide-alkyne cycloaddition reaction to form a 1,4-disubstituted triazole. The dendronization reaction proceeded quantitatively in 48 hours in aqueous medium as confirmed by ¹H NMR and Fourier transform infrared spectroscopy (FT-IR) spectroscopy.

Hyperbranched polymers from A2 + B3 strategy: recent advances in description and control of fine topology

Recent advances in the fine topology regulation of hyperbranched polymers from an A₂ + B₃ strategy were presented from the perspectives of topology description and architecture control.

MALDI-TOF to compare polysaccharide profiles from commercial health supplements of different mushroom species

In this work MALDI-TOF mass spectroscopy was investigated to characterise the β-glucan profiles of several commercial health supplements, without any derivatisation or purification pre-treatment. The effect of two solvents (water and dimethyl sulfoxide) and two MALDI matrices (2,5-dihydroxybenzoic acid and 2',4',6'-trihydroxyacetophenone) was first evaluated on dextran standards. MALDI-TOF was found as a useful and quick technique to obtain structural information of diverse food supplements based on mushroom extracts. The MALDI polysaccharide profiles of 5 supplements from different mushroom species were qualitatively similar showing [Glucan+Na](+) cations with a peak-to-peak mass difference of 16 Da consistent with the repeating unit of the β-(1→3)-glucan. The profiles strongly depended on the sample solvent used, with m/z values around 5000-8000 for water and 2000 for dimethyl sulfoxide; differences between samples were revealed in the molecular weight of the aqueous preparation, with the highest values for Maitake and Cordyceps species.

Novel behavior of the chromatographic separation of linear and cyclic polymers

In various polymerization processes, the formation of a wide variety of chains, not only in length but also in chemical composition, broadly complicates comprehensive polymer characterization. In this communication, we compare different stationary and mobile phases for the analysis of complex polymer mixtures via size-exclusion chromatography-mass spectrometry (SEC-MS). To the best of our knowledge, we report novel chromatographic effects for the separation of linear and cyclic oligomers for polyesters (PE) and polyurethanes (PUR). A complete separation for the different structures was achieved for both polymer types with a single-solvent system (acetonitrile, ACN) and without extensive optimization. Additionally, cyclic species were found to show an inverse elution profile compared to their linear counterparts, suggesting distinct physical properties between species.

Ionic liquid matrix-based dispersive liquid-liquid microextraction for enhanced MALDI-MS analysis of phospholipids in soybean

Ionic liquid matrix (ILM) is found to be a very versatile substance for analysis of broad range of organic molecules in matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) due to good solubility for a variety of analytes, formation of homogenous crystals and high vacuum stability of the matrix. In the present work, an ILM, cyno-4-hydroxycinnamic acid-butylamine (CHCAB) was employed in dispersive liquid-liquid microextraction (DLLME) as sample probe and matrix for extraction and ionization of phospholipids from food samples (soybean) prior to MALDI-MS analysis. With the employed technique, 8-125 fold improvement in signal intensity and limit of detection were achieved for the analysis of phospholipids. The best extraction efficiency of phospholipids in ILM-DLLME was obtained with 5min extraction time in presence 30mg/mL CHCAB and 1.2% NaCl using chloroform as an extracting solvent and methanol as a dispersing solvent. Further, the developed ILM-DLLME procedure has been successfully applied for the analysis of phospholipids in soybean samples in MALDI-MS.

High-resolution MALDI-TOF MS study on analysis of low-molecular-weight products from photo-oxidation of poly(3-hexylthiophene)

High-resolution matrix-assisted laser desorption/ionization (MALDI) time-of-flight mass spectrometry (TOF MS) was used for the analysis of the low-molecular-weight products from the photo-oxidation of poly(3-hexylthiophene) (P3HT) in solution and thin film. Eight new peak series were observed in the low-mass range of the mass spectra of the products degraded in solution, and the formulas of the eight components were determined from the accurate mass. From SEC/MALDI-TOF MS, two components were identified as the degraded products, and the other six components were derived from the fragmentation of the degraded products during the MALDI process. A mechanism for the formation of these components was proposed on the basis of the results of MALDI-TOF MS. For the thin film degradation, a part of products in the solution degradation were observed, which supports that the oxidation of P3HT in solution and thin film proceeded in the same mechanism. This study shows that high-resolution MALDI-TOF MS is effective for the analysis of the low-molecular-weight products from P3HT photo-oxidation and expected to be feasible for the degradation analyses of other polymers. Copyright © 2015 John Wiley & Sons, Ltd.

Direct detection of the anti-cancer drug 9-phenylacridine in tissues by graphite rod laser desorption vacuum-ultraviolet post-ionization mass spectrometry

RATIONALE

Traditionally, drug analysis in biological tissue by mass spectrometry has required complicated sample pre-treatment, which not only wasted time, but also had adverse effects on the results. In order to assist assessment of potential drugs rapidly and accurately, a direct analytical method for drug detection in tissues is needed. The development of such a method is described in this study.

METHODS

An anti-cancer drug, 9-phenylacridine (ACPH), injected into the kidney of mice, was directly analysed from tissues placed on the surface of a graphite rod by near-infrared (1064 nm) laser desorption single photon ionization mass spectrometry (LD/SPI-MS).

RESULTS

The LD/SPI-MS method was successfully validated by direct analysis of ACPH in kidney sections of mice, without any complicated and time-consuming sample pre-treatment. The sensitivity of detection was down to about 100 fmol per spot and the wide linear dynamic range allowed quantitative detection of ACPH in complex biological samples. A drug-time curve was acquired of ACPH in the kidney of mice after the drug had been injected into the caudal vein.

CONCLUSIONS

It was demonstrated that the anti-tumor drug ACPH could be directly and rapidly detected by LD/SPI-MS in biological tissues without any time-consuming pre-treatment procedure. This method could potentially be applied to the selective localization and analysis of small molecule drugs in tissues and to the study of the pharmacokinetics of new drugs.

Solid-state NMR studies of Ziegler-Natta and metallocene catalysts

Ziegler-Natta catalysts are the workhorses of polyolefin production. However, although they have been used and intensively studied for half a century, there is still no comprehensive picture of their mechanistic operation. New techniques are needed to gain more insight in these catalysts. Solid-state NMR has reached a high level of sophistication over the last few decades and holds great promise for providing a deeper insight in Ziegler-Natta catalysis. This review outlines the possibilities for solid-state NMR to characterize the different components and interactions in Ziegler-Natta and metallocene catalysts. An overview is given of some of the expected mechanisms and the resulting polymer microstructure and other characteristics. In the second part of this review we present studies that have used solid-state NMR to investigate the composition of Ziegler-Natta and metallocene catalysts or the interactions between their components.

Matrix normalized MALDI-TOF quantification of a fluorotelomer-based acrylate polymer

The degradation of fluorotelomer-based acrylate polymers (FTACPs) has been hypothesized to serve as a source of the environmental contaminants, perfluoroalkyl carboxylates (PFCAs). Studies have relied on indirect measurement of presumed degradation products to evaluate the environmental fate of FTACPs; however, this approach leaves a degree of uncertainty. The present study describes the development of a quantitative matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrometry method as the first direct analysis method for FTACPs. The model FTACP used in this study was poly(8:2 FTAC-co-HDA), a copolymer of 8:2 fluorotelomer acrylate (8:2 FTAC) and hexadecyl acrylate (HDA). Instead of relying on an internal standard polymer, the intensities of 40 poly(8:2 FTAC-co-HDA) signals (911-4612 Da) were normalized to the signal intensity of a matrix-sodium cluster (659 Da). We termed this value the normalized polymer response (P(N)). By using the same dithranol solution for the sample preparation of poly(8:2 FTAC-co-HDA) standards, calibration curves with coefficient of determinations (R(2)) typically >0.98 were produced. When poly(8:2 FTAC-co-HDA) samples were prepared with the same dithranol solution as the poly(8:2 FTAC-co-HDA) standards, quantification to within 25% of the theoretical concentration was achieved. This approach minimized the sample-to-sample variability that typically plagues MALDI-TOF, and is the first method developed to directly quantify FTACPs.

Separation and identification of oligomeric vinylmethoxysiloxanes by gradient elution chromatography coupled with electrospray ionization mass spectrometry

A high-performance liquid chromatography with online electrospray ionization mass spectrometry (HPLC-ESI-MS) has been used to separate and identify the reaction products resulting from controlled acid-catalyzed hydrolytic polycondensation of vinyltrimethoxysilane (VMS). The reaction products were prepared in the molar ratio of water to VMS (r1) ranging from 0.6 to 1.2, characterized by standard spectroscopic techniques, and subsequently analyzed by HPLC-UV absorbance detection and HPLC-ESI-MS. Linear vinylmethoxysiloxane oligomers with the number of repeat units (n) ranging from 3 to 11 are predominant species at the beginning of the reaction (for r1=0.6). Then they transform into monocyclic (for r1=1.0) and bicyclic (for r1=1.2) species with gradually increasing amount of water in the reaction mixture. The oligomer conversions suggest that structure growth of vinylmetoxysiloxanes proceeds by nonrandom cyclization reactions, which are favored over chain extension under the chosen reaction conditions. Direct ESI-MS, HPLC-ESI-MS and HPLC-UV were used to determine the molar mass distributions for the vinylmethoxysiloxane oligomers prepared in three different values of r1. The molar mass averages increase slightly with the amount of water in the reaction mixture and vary somewhat with the method used. Our results indicate that with the combined capability of separation, sensitivity and identification, HPLC-ESI-MS is especially useful to study highly complex silicon-based compounds with hyperbranched, caged or cubic structures as building blocks for hybrid materials.

Matrix-assisted laser desorption/ionization mass spectrometric analysis of poly(3,4-ethylenedioxythiophene) in solid-state dye-sensitized solar cells: comparison of in situ photoelectrochemical polymerization in aqueous micellar and organic media

Solid-state dye-sensitized solar cells (sDSCs) are devoid of such issues as electrolyte evaporation or leakage and electrode corrosion, which are typical for traditional liquid electrolyte-based DSCs. Poly(3,4-ethylenedioxythiophene) (PEDOT) is one of the most popular and efficient p-type conducting polymers that are used in sDSCs as a solid-state hole-transporting material. The most convenient way to deposit this insoluble polymer into the dye-sensitized mesoporous working electrode is in situ photoelectrochemical polymerization. Apparently, the structure and the physicochemical properties of the generated conducting polymer, which determine the photovoltaic performance of the corresponding solar cell, can be significantly affected by the preparation conditions. Therefore, a simple and fast analytical method that can reveal information on polymer chain length, possible chemical modifications, and impurities is strongly required for the rapid development of efficient solar energy-converting devices. In this contribution, we applied matrix-assisted laser desorption/ionization mass spectrometry (MALDI MS) for the analysis of PEDOT directly on sDSCs. It was found that the PEDOT generated in aqueous micellar medium possesses relatively shorter polymeric chains than the PEDOT deposited from an organic medium. Furthermore, the micellar electrolyte promotes a transformation of one of the thiophene terminal units to thiophenone. The introduction of a carbonyl group into the PEDOT molecule impedes the growth of the polymer chain and reduces the conductivity of the final polymer film. Both the simplicity of sample preparation (only application of the organic matrix onto the solar cell is needed) and the rapidity of analysis hold the promise of making MALDI MS an essential tool for the physicochemical characterization of conducting polymer-based sDSCs.

Alternating copolymerization by nitroxide-mediated polymerization and subsequent orthogonal functionalization

A novel method for the preparation of functionalized alternating copolymers is presented. Nitroxide-mediated polymerization of hexafluoroisopropyl acrylate with 7-octenyl vinyl ether provides the corresponding alternating polymer, which can be chemically modified using two orthogonal polymer-analogous reactions. A thiol-ene click reaction followed by amidation provides dual-functionalized alternating copolymers. The potential of this method is illustrated by the preparation of a small library (15 examples) of functionalized alternating copolymers.

Quantitative analysis of polyhexamethylene guanidine (PHMG) oligomers via matrix-assisted laser desorption/ionization time-of-flight mass spectrometry with an ionic-liquid matrix

RATIONALE

Quantifying polymers by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) with a conventional crystalline matrix generally suffers from poor sample-to-sample or shot-to-shot reproducibility. An ionic-liquid matrix has been demonstrated to mitigate these reproducibility issues by providing a homogeneous sample surface, which is useful for quantifying polymers. In the present study, we evaluated the use of an ionic liquid matrix, i.e., 1-methylimidazolium α-cyano-4-hydroxycinnamate (1-MeIm-CHCA), to quantify polyhexamethylene guanidine (PHMG) samples that impose a critical health hazard when inhaled in the form of droplets.

METHODS

MALDI-TOF mass spectra were acquired for PHMG oligomers using a variety of ionic-liquid matrices including 1-MeIm-CHCA. Calibration curves were constructed by plotting the sum of the PHMG oligomer peak areas versus PHMG sample concentration with a variety of peptide internal standards.

RESULTS

Compared with the conventional crystalline matrix, the 1-MeIm-CHCA ionic-liquid matrix had much better reproducibility (lower standard deviations). Furthermore, by using an internal peptide standard, good linear calibration plots could be obtained over a range of PMHG concentrations of at least 4 orders of magnitude.

CONCLUSIONS

This study successfully demonstrated that PHMG samples can be quantitatively characterized by MALDI-TOFMS with an ionic-liquid matrix and an internal standard.

Synthesis and characterization of branched fullerene-terminated poly(ethylene glycol)s

Direct transesterification of phenyl-C₆₁-butyric acid methyl ester with polyethylene glycols produces a range of multiple fullerene species. The use of a monodispersed PEG core allows isolation of a pure fully substituted product.

Bithiophene-based polybenzofulvene derivatives with high stacking and hole mobility

The insertion of bithiophene chromophores in the phenylindene scaffold produced stacked polybenzofulvenes showing high hole mobility.

Exploration of polyamide structure-property relationships by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

RATIONALE

Polyamides (PA) are among the most used classes of polymers because of their attractive properties. Depending on the nature and proportion of the co-monomers used for their synthesis, they can exhibit a very large range of melting temperatures (Tm ). This study aims at the correlation of data from mass spectrometry (MS) with differential scanning calorimetry (DSC) and X-ray diffraction analyses to relate molecular structure to physical properties such as melting temperature, enthalpy change and crystallinity rate.

METHODS

Six different PA copolymers with molecular weights around 3500 g mol(-1) were synthesized with varying proportions of different co-monomers (amino-acid AB/di-amine AA/di-acid BB). Their melting temperature, enthalpy change and crystallinity rate were measured by DSC and X-ray diffraction. Their structural characterization was carried out by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS). Because of the poor solubility of PA, a solvent-free sample preparation strategy was used with 2,5-dihydroxybenzoic acid (2,5-DHB) as the matrix and sodium iodide as the cationizing agent.

RESULTS

The different proportions of the repeating unit types led to the formation of PA with melting temperatures ranging from 115°C to 185°C. The structural characterization of these samples by MALDI-TOF-MS revealed a collection of different ion distributions with different sequences of repeating units (AA, BB; AB/AA, BB and AB) in different proportions according to the mixture of monomers used in the synthesis. The relative intensities of these ion distributions were related to sample complexity and structure. They were correlated to DSC and X-ray results, to explain the observed physical properties.

CONCLUSIONS

The structural information obtained by MALDI-TOF-MS provided a better understanding of the variation of the PA melting temperature and established a structure-properties relationship. This work will allow future PA designs to be monitored.

Characterizing synthetic polymers and additives using new ionization methods for mass spectrometry

RATIONALE

New inlet and vacuum ionization methods provide advantages of specificity, simplicity and speed for the analysis of synthetic polymers and polymer additives directly from surfaces such as fibers using mass spectrometry (MS) on different commercial mass spectrometers (Waters SYNAPT G2, Thermo LTQ Velos).

METHODS

We compare inlet ionization methods with the recently discovered vacuum ionization method. This method, termed matrix assisted ionization vacuum (MAIV), utilizes the matrix 3-nitrobenzonitrile (3-NBN) for the analysis of synthetic polymers and additives without additional energy input by simply exposing the matrix:analyte:salt to the vacuum of the mass spectrometer. Matrix:analyte:salt samples can be introduced while dry (surfaces, e.g. glass slides, pipet tips) or slightly wet (e.g. filter paper, pipet tips).

RESULTS

Compounds ionized by these methods can be analyzed in both positive and negative detection modes through cationization or deprotonation, respectively. The dynamic range of the experiment can be enhanced, as well as structural analysis performed, by coupling the vacuum ionization method with ion mobility spectrometry mass spectrometry (IMS-MS) and tandem mass spectrometric (MS/MS) fragmentation.

CONCLUSIONS

The specificity of 3-NBN matrix to ionize small and large nonvolatile analyte molecules by MAIV makes this matrix a good choice for observing low-abundance additives in the presence of large amounts of synthetic polymer using MS.

Synthesis of poly(ethylene oxide) approaching monodispersity

Polydispersity in polymers hinders fundamental understanding of their structure-property relationships and prevents them from being used in fields like medicine, where polydispersity affects biological activity. The polydispersity of relatively short-chain poly(ethylene oxide) [(CH2CH2O2)n; PEO] affects its biological activity, for example, the toxicity and efficacy of PEOylated drugs. As a result, there have been intensive efforts to reduce the dispersity as much as possible (truly monodispersed materials are not possible). Here we report a synthetic procedure that leads to an unprecedented low level of dispersity. We also show for the first time that it is possible to discriminate between PEOs differing in only 1 ethylene oxide (EO) unit, essential in order to verify the exceptionally low levels of dispersity achieved here. It is anticipated that the synthesis of poly(ethylene oxide) approaching monodispersity will be of value in many fields where the applications are sensitive to the distribution of molar mass.

Advantages of monodisperse and chemically robust "SpheriCal" polyester dendrimers as a "universal" MS calibrant

The utilization of dendrimer calibrants as an alternative to peptides and proteins for high mass calibration is explored. These synthetic macromolecules exhibited a number of attractive advantages, including exceptional shelf-lives, broad compatibility with a wide range of matrices and solvents, and evenly spaced calibration masses across the mass range examined, 700-30,000 u. The exceptional purity of these dendrimers and the technical simplicity of this calibration platform validate their broad relevance for high molecular weight mass spectrometry.