Near-infrared emissive carbon dots with 33.96% emission in aqueous solution for cellular sensing and light-emitting diodes

Water-soluble green-emitting carbon nanodots with enhanced thermal stability for biological applications

High stability and water solubility of fluorescent nanomaterials are considered key factors to evaluate their feasibility for fundamental applications. Herein, water-soluble and thermally stable, green-emitting carbon nanodots (CNDs) have been synthesized via a facile hydrothermal method with an average size of 1.9 nm. CNDs showed green emission centered at 544 nm with the photo-luminescence quantum yield (PLQY) of up to 10.1% under the excitation of 400 nm. The obtained CNDs demonstrated high resistance towards photo-bleaching and an ionic (KCl) environment. Moreover, the aqueous solution of CNDs exhibited excellent stability under harsh thermal conditions from 10 °C to 80 °C. The as-prepared CNDs showed stable performance at high temperatures, even after keeping them at 80 °C for 30 min. Furthermore, the green emissive CNDs were incubated in T-ca cancer cells for bio-imaging applications. The results indicated that CNDs can served as an effective thermally-stable bio-imaging agent in T-ca cells at the physiological temperature range of 25 °C-45 °C. Green emission and excellent thermal stability make these CNDs promising fluorescent materials for potential applications in the medical field, which requires long-wavelength fluorescence and high-temperature imaging.

Exploiting Ru-Induced Lattice Strain in CoRu Nanoalloys for Robust Bifunctional Hydrogen Production

Designing bifunctional catalysts capable of driving the electrochemical hydrogen evolution reaction (HER) and also H2 evolution via the hydrolysis of hydrogen storage materials such as ammonia borane (AB) is of considerable practical importance for future hydrogen economies. Herein, we systematically examined the effect of tensile lattice strain in CoRu nanoalloys supported on carbon quantum dots (CoRu/CQDs) on hydrogen generation by HER and AB hydrolysis. By varying the Ru content, the lattice parameters and Ru-induced lattice strain in the CoRu nanoalloys could be tuned. The CoRu0.5 /CQDs catalyst with an ultra-low Ru content (1.33 wt.%) exhibited excellent catalytic activity for HER (η=18 mV at 10 mA cm-2 in 1 M KOH) and extraordinary activity for the hydrolysis of AB with a turnover frequency of 3255.4 mol( H 2 )  mol-1 (Ru)  min-1 or 814.7 mol( H 2 )  mol-1 (cat)  min-1 at 298 K, respectively, representing one of the best activities yet reported for AB hydrolysis over a ruthenium alloy catalyst. Moreover, the CoRu0.5 /CQDs catalyst displayed excellent stability during each reaction, including seven alternating cycles of HER and AB hydrolysis. Theoretical calculations revealed that the remarkable catalytic performance of CoRu0.5 /CQDs resulted from the optimal alloy electronic structure realized by incorporating small amounts of Ru, which enabled fast interfacial electron transfer to intermediates, thus benefitting H2 evolution kinetics. Results support the development of new and improved catalysts HER and AB hydrolysis.

Polydopamine-carbon dots functionalized hollow carbon nanoplatform for fluorescence-imaging and photothermal-enhanced thermochemotherapy

The low power photothermal therapy can reduce the tissue damage caused by laser irradiation, thus the near-infrared (NIR) absorbing vehicles with high photothermal conversion efficiency are demanded in the low power treatment. Herein, the NIR-absorbing agent polydopamine (PDA) and carbon dots (CDs) were gated on the openings of hollow mesoporous carbon (HMC) to construct a photothermal enhanced multi-functional system (HMC-SS-PDA@CDs). Interestingly, the fluorescence emission wavelength of HMC-SS-PDA@CDs was red-shifted by FRET effect between PDA and CDs, which solved the dilemma of fluorescence quenching of carbon-based materials and was more conducive to cell imaging. The modification of PDA@CDs not only acts as the gatekeepers to realize multi-responsive release of pH, GSH and NIR, but also endows the HMC vehicle with excellent photothermal generation capacity, the possibility for bio-imaging as well as the enhanced stability. Naturally, both the cytological level and the multicellular tumor sphere level demonstrate that the delivery system has good low-power synergistic therapeutic with combination index (CI) of 0.348 and imaging effects. Meanwhile, the combined treatment group showed the highest tumor inhibition rate of 92.6% at 0.75 W/cm². Therefore, DOX/HMC-SS-PDA@CDs nano-platform had broad application prospects in low power therapy and convenient imaging of carbon-based materials.

Enhanced Near-Infrared Emission from Carbon Dots by Surface Deprotonation

Carbon dots (CDs) with efficient excitation and emission in deep-red/near-infrared (NIR) spectral range are important for bioimaging applications. Herein, we develop a simple and effective method to significantly enhance both the absorption and emission of CDs in deep-red/NIR by suppressing nonradiative charge recombination via deprotonation of the CD surface. As compared to aqueous solutions at room temperature, NIR emission of CDs in N,N-dimethylformamide and glycerol experience a 50- and 70-fold increase at -20 °C, respectively, due to enhanced deprotonation ability and viscosity. On the basis of the adjustable NIR fluorescence intensity of CDs, multilevel data encryption in the NIR region is realized by controlling the humidity and the temperature of a CD-ink stamped paper.

Accurate SERS monitoring of the plasmon mediated UV/visible/NIR photocatalytic and photothermal catalytic process involving Ag@carbon dots

The excited carriers (electrons and holes) and heat energy that originate from plasmonic metal nanomaterials are crucial to the enhancement of the photocatalytic performance. In this study, an Ag@carbon dots (Ag@CDs) hybrid has been prepared with excellent Fenton-like photocatalytic and photothermal conversion properties for catalyzing H₂O₂ to generate hydroxyl radicals (˙OH) for the degradation of crystal violet (CV) dye under full solar spectrum irradiation based on a unique plasmon effect. We have obtained some intrinsic kinetics information, including the reaction rate and apparent activation energy on the surface of the Ag@CDs, through a surface-enhanced Raman scattering strategy to investigate the contributions made by photocatalytic and photothermal effects in the plasmon mediated reaction under irradiation from ultraviolet (UV)/visible/near-infrared (NIR) light. In the visible light region, the Ag@CDs + H₂O₂ system exhibits the fastest apparent reaction rate owing to the involvement of a large number of hot carriers, which are generated by the strongest plasmon effect, and the presence of the photothermal effect mediated by the plasmonic effect. As the wavelength of the illumination blue-shifts to the UV region, the plasmon effect is weakened, resulting in a decrease in the number of hot carriers. Furthermore, the hot carriers will not be further thermalized because of interband transitions. In addition, the catalytic performance of Ag@CDs in the NIR region is almost dominated by the photothermal effect. This work provides deep insights into understanding the plasmon-mediated photocatalytic mechanism of the Ag@CDs hybrid.

Yellow emission N-doped fluorescent carbon dots as fluorescent nanoprobes for the detection of L-threonine in real samples

High quantum yield carbon dots and their applications in the detection of L-threonine.

Nitrogen and chlorine co-doped carbon dots with synchronous excitation of multiple luminescence centers for blue-white emission

N,Cl-CDs emit the blue-white lighting, which synchronously contains the two ranges of wavelength that the chloroplast needs for photosynthesis.

Hemicellulose-triggered high-yield synthesis of carbon dots from biomass

Biomass is a major resource for the preparation of carbon dots (CDs) and improving the production yield of CDs is a challenge. Herein, we select corn cobs to prepare CDs with a production yield as high as 55%. Such a high yield derives from the high content of hemicellulose and extremely low lignin content in corn cobs.

Orange red-emitting carbon dots for enhanced colorimetric detection of Fe3+

Orange red-emitting CDs were constructed from 2,3-diaminopyridine and successfully used for visual colorimetry and near-infrared cellular imaging.

Yellow emission carbon dots for highly selective and sensitive OFF-ON sensing of ferric and pyrophosphate ions in living cells

A simple "OFF-ON" fluorescent system was proposed for selective and sensitive detection of ferric ion (Fe³⁺) and pyrophosphate (PPi) in living cells. The method was constructed based on the bright yellow emission of carbon dots (y-CDs), which were prepared using o-phenylenediamine (OPD) as the precursor via a facile hydrothermal treatment. The as-obtained y-CDs, with an average size of 2.6 nm, exhibited an excitation-independent emission peak at 574 nm. The fluorescence of y-CDs can be remarkably quenched by Fe³⁺ with high selectivity and sensitivity. Interestingly, the quenched fluorescence can be recovered regularly upon addition of PPi, showing a promising detection for PPi. The linear ranges for Fe³⁺ and PPi detections were 0.05-80 and 0.5-120 μM, respectively, and the corresponding limit of detections (LODs) were 22.1 and 73.9 nM. As we proved the y-CDs have negligible cytotoxicity and excellent biocompatibility, further application to the fluorescence imaging of intracellular Fe³⁺ and PPi were conducted, suggesting the prepared y-CDs can be used to monitor Fe³⁺ and PPi variation in living cells. Overall, our developed y-CDs-based OFF-ON switch fluorescent probe has the advantages of simplicity, agility, high sensitivity and selectivity, which provides a promising platform for environmental and biology applications, and paves a new avenue for monitoring the hydrolysis process of adenosine triphosphate disodium salt (ATP) by detection of PPi in organisms.

Engineering an Injectable Electroactive Nanohybrid Hydrogel for Boosting Peripheral Nerve Growth and Myelination in Combination with Electrical Stimulation

Electrical stimulation (ES) can be used to manipulate recovery after peripheral nerve injuries. Although biomaterial-based strategies have already been implemented to gain momentum for ES and engineer permissive microenvironments for neural regeneration, the development of biomaterials for specific stimuli-responsive modulation of neural cell properties remains a challenge. Herein, we homogeneously incorporate pristine carbon nanotubes into a functional self-assembling peptide to prepare a hybrid hydrogel with good injectability and conductivity. Two-dimensional (on the surface) and three-dimensional (within the hybrid hydrogel) culturing experiments demonstrate that ES promotes axon outgrowth and Schwann cell (SC) migration away from dorsal root ganglia spheres, further revealing that ES-enhanced interactions between SCs and axons result in improved myelination. Thus, our study not only advances the development of tailor-made materials but also provides useful insights into comprehensive approaches for promoting nerve growth and presents a practical strategy of repairing peripheral nerve injuries.

The synthesis and modification of highly fluorescent carbon quantum dots for reversible detection of water-soluble phosphonate-1-hydroxyethane-1,1-diphosphonic acid by fluorescence spectroscopy

Photoluminescent (PL) carbon quantum dots (CQDs) were prepared successfully using a facile and green procedure. They exhibited striking blue fluorescence and excellent optical properties, with a quantum yield as high as 61.44%. Due to the fluorescence quenching effect and the stronger complexing ability of the phosphoric acid group of 1-hydroxyethane-1,1-diphosphonic acid (HEDP) to Fe³⁺ , CQDs doped with Fe³⁺ were adequately constructed as an efficient and sensitive fluorescent probe for HEDP-specific sensing. The proposed fluorescent probe had a sensitive and rapid response in the range 5-70 μM. Furthermore, quantitative molecular surface (QMS) analysis based on the Multiwfn program was applied to explore the complexation mode of HEDP and metal ions. The distribution of electrostatic potential (ESP), average local ionization energy (ALIE), the minimum value points and the position of the lone pair electrons on the surface of molecular van der Waals were further determined. More strikingly, this experiment achieved the quantitative detection of water-soluble phosphonate-HEDP, for the first time using fluorescence spectrometry. It has been proved to be an effective and intuitive sensing method for the detection of HEDP in real samples.

Chitosan derived nitrogen-doped carbon dots suppress osteoclastic osteolysis via downregulating ROS

Osteoclasts are the main cells involved in normal bone remodeling and pathological bone destruction in vivo. Overactivation of osteoclasts can lead to osteolytic diseases, including breast cancer, bone tumors, arthritis, the aseptic loosening of orthopedic implants, and Paget's disease. Excessive reactive oxygen species are the main cause of osteoclast overactivation. We have synthesized chitosan derived nitrogen-doped carbon dots (N-CDs) with a high synthetic yield and the ability to scavenge reactive oxygen species (ROS). N-CDs effectively abrogated RANKL-induced elevation in ROS generation and therefore impaired the activation of NF-κB and MAPK pathways. Osteoclastogenesis and bone resorption was effectively attenuated in vitro. Furthermore, the in vivo administration of N-CDs in mice protected them against lipopolysaccharide (LPS)-induced calvarial bone destruction and breast cancer cell-induced tibial bone loss. Based on the good biocompatibility of N-CDs and the ability to efficiently remove ROS, a nanomaterial treatment scheme was provided for the first time for the clinical treatment of osteolytic diseases.

Developing fluorescent copper nanoclusters: Synthesis, properties, and applications

Metal nanoclusters exhibit strong fluorescence emission, providing immense potential for developments in biological labeling and imaging. Copper nanoclusters in particular, due to their unique optical properties such as molecular-like absorption and strong luminescence, represent a novel fluorescent nanomaterial for sensing and bioimaging applications. This review describes research progress on Cu nanoclusters in recent years, investigating the synthesis techniques, their properties, and their promising applications. A concluding summary provides an outlook on the future research challenges for Cu nanoclusters and their corresponding synthesis techniques.

Carbon dots with red emission for bioimaging of fungal cells and detecting Hg2+ and ziram in aqueous solution

It is of importance for bioimaging of fungal cells using biocompatible and low toxic carbon dots (CDs) as labels in plant protection field because a clearer understanding on the infection mechanism of fungi on plant can be achieved. Meanwhile, long wavelength, especially, red/near-infrared (NIR) emissive CDs are more biocompatible than short wavelength emissive ones. In this work, CDs with red emission were synthesized by solvothermal pyrolysis of citric acid, acrylamide dissolved in formamide. Fungal cells stained by the CDs with red emission were brightly illuminated when imaged on a fluorescent microscope with excitation by a green laser pulse, suggesting the CDs are of an excellent label for bioimaging of fungal cell in red color region. Moreover, the CDs show a selective response to Hg²⁺ in the NaAc-HAc buffer solution, while ziram can form a more stable complex with Hg²⁺, leading to a recovery of the quenched fluorescence of the CDs. Therefore, methods for the detections of Hg²⁺ and ziram based on the "off-on" fluorescence of the CDs were established with limits of detection as low as 0.19 μM and 0.55 μg/mL.

Effect of Solvent-Derived Highly Luminescent Multicolor Carbon Dots for White-Light-Emitting Diodes and Water Detection

Recently, the multicolor fluorescent carbon dots (CDs) have drawn much attention due to their various applications. Herein, we report multicolor emissive CDs by solvent-controlled and solvent-responded approaches. The blue to red color emissive CDs are obtained by the solvothermal method by varying the solvent during the reaction. The red color emissive CDs (R-CDs) with good quantum yield is obtained in a water medium. The detailed characterization revealed that the solvent controls the particle size, band gap, and nitrogen doping concentration. Specifically, in the protic solvent, the high N content and presence of imine nitrogen are the reason for red emission. However, in an aprotic solvent, the least N doping and a lack of C-O groups are responsible for a blueshift. Interestingly, it was observed that the R-CDs provide a full range of visible color by dispersing in different immiscible solvents. The fluorescence emission in immiscible solvents is redshifted by enhancing the polarity. Moreover, the developed CDs detected the low water concentrations (≤0.2%, v/v) visually and fluorometrically in various organic solvents. Simultaneously, we have employed synthesized CDs in white-light-emitting diodes and fluorescent ink.

Deep Red Emissive Carbonized Polymer Dots with Unprecedented Narrow Full Width at Half Maximum

Development of high-performance carbon dots (CDs) with emission wavelength longer than 660 nm (deep red emission) is critical in deep-tissue bioimaging, yet it is still a major challenge to obtain CDs with both narrow full width at half maximum (FWHM) and high deep red/near-infrared emission yield. Here, deep red emissive carbonized polymer dots (CPDs) with unprecedented FWHM of 20 nm are synthesized. The purified CPDs in dimethyl sulfoxide (DMSO) solution possess quantum yield (QY) as high as 59% under 413 nm excitation, as well as recorded QY of 31% under 660 nm excitation in the deep red fluorescent window. Detailed characterizations identify that CPDs have unique polymer characteristics, consisting of carbon cores and the shells of polymer chains, and π conjugated system formed with N heterocycles and aromatic rings governs the single photoluminescence (PL) center, which is responsible for high QY in deep red emissive CPDs with narrow FWHM. The CPDs exhibit strong absorption and emission in the deep red light region, low toxicity, and good biocompatibility, making them an efficient probe for both one-photon and two-photon bioimaging. CPDs are rapidly excreted via the kidney system and hepatobiliary system.

Enhancing photoluminescence of carbon quantum dots doped PVA films with randomly dispersed silica microspheres

As a kind of excellent photoluminescent material, carbon quantum dots have been extensively studied in many fields, including biomedical applications and optoelectronic devices. They have been dispersed in polymer matrices to form luminescent films which can be used in LEDs, displays, sensors, etc. Owing to the total internal reflection at the flat polymer/air interfaces, a significant portion of the emitted light are trapped and dissipated. In this paper, we fabricate free standing flexible PVA films with photoluminescent carbon quantum dots embedded in them. We disperse silica microspheres at the film surfaces to couple out the total internal reflection. The effects of sphere densities and diameters on the enhancement of photoluminescence are experimentally investigated with a homemade microscope. The enhancement of fluorescence intensity is as high as 1.83 when the film is fully covered by spheres of 0.86 [Formula: see text]m diameter. It is worth noting that the light extraction originates from rather the scattering of individual spheres than the diffraction of ordered arrays. The mechanism of scattering is confirmed by numerical simulations. The simulated results show that the evanescent wave at the flat PVA/air interface can be effectively scattered out of the film.

Photochemically Synthesized Ruthenium Nanoparticle-Decorated Carbon-Dot Nanochains: An Efficient Catalyst for Synergistic Redox Reactions

Ruthenium nanoparticle (NP)-decorated carbon dots (Ru/C-dots) were fabricated as a potential catalyst in the application of both oxidation and reduction. The photochemical method was used to synthesize Ru/C-dot nanohybrids. The as-prepared Ru/C-dots exhibited a core-shell-based nanochain structure, in which the spherical nature of C-dots further evolved to a layer structure to homogeneously encapsulate Ru NPs. Such Ru/C-dots have excellent catalytic properties, which were demonstrated in the oxidation of flavonoids and concomitantly reduction of inorganic complex and organic dyes, each yielding a high catalytic rate constant. We also proposed an appropriate catalytic mechanism for each reaction. Higher catalytic activity was achieved by the synergistic effect of the encapsulated Ru NPs and the C-dots layer. Further, this nanohybrid was successfully applied to inspect a real aqueous sample. We anticipated that Ru/C-dots nanohybrid may open up a broad platform for the design of efficient multifunctional catalysts.

Regulation of Autophagy Orchestrates Pyroptotic Cell Death in Molybdenum Disulfide Quantum Dot-Induced Microglial Toxicity

Molybdenum disulfide quantum dots (MoS₂ QDs) represent an emerging class of two-dimensional (2D) atomically layered transition metal dichalcogenide nanostructures with few nanometers in lateral size, which show attractive potential as versatile platforms for theranostic applications in various neurological disorders. However, the potential impacts of MoS₂ QDs on microglia remain unclear. In this report, we showed that exposure of microglia to MoS₂ QDs triggered NLRP3 inflammasome activation as revealed by the cleavage of the inactive precursor of caspase-1 to its active form and the increased release of downstream pro-inflammatory cytokines, resulting in microglia cell death that occurred through caspase-1-dependent pyroptosis. We also found that MoS₂ QDs activated autophagy, and suppression of autophagy by specific inhibitors potentiated MoS₂ QD-induced pyroptosis. Additionally, MoS₂ QDs stimulated mitochondria-derived reactive oxygen species (mtROS) generation in BV-2 cells. However, ROS scavengers could diminish the MoS₂ QD-mediated NLRP3 inflammasome activation and pyroptotic cell death in microglia. Overall, our findings identified pyroptosis as a cellular response to MoS₂ QD exposure in microglial cells, affording novel insights into the neurotoxicity of MoS₂ QDs and facilitating the rational design and application of functional MoS₂ QDs in neuroscience.

One-step microwave synthesis of N,S co-doped carbon dots from 1,6-hexanediamine dihydrochloride for cell imaging and ion detection

As a new member of the fluorescent carbon nanomaterial family, carbon dots (CDs) not only have outstanding photoluminescence properties and small size characteristics, but also contain favourable low cytotoxicity and biocompatibility, which could be the best choice to detect of ions to replace quantum dots for ions detection. Here, the N,S co-doped carbon dots (N/S-CDs) was synthesized by one-step microwave using 1,6-hexanediamine dihydrochloride and dimethyl sulfoxide as precursors, and their morphology and structure were characterized by TEM, XRD, XPS and FTIR. The optimal emission wavelength of the CDs was 512 nm with green fluorescence, and was red-shifted gradually as the excitation wavelength aggrandized. The synthesized CDs owned a well quantum yield of 24 %. It was further applied for the detection of MnO₄^- and Cr₂O₇^2- with an excellent detection limit of 0.34 μM and 0.23μM, respectively. Cr₂O₇^2- did not influence the N/S-CDs PL response of MnO₄^- in the presence of excessive Pb²⁺. Moreover, the obtained N/S-CDs demonstrated preeminent biocompatibility and could be resoundingly applied for cellular imaging.

Intracellular pH-propelled assembly of smart carbon nanodots and selective photothermal therapy for cancer cells

A kind of smart carbon nanodots (CNDs) with the pH response feature was prepared by the one-pot hydrothermal treatment of citric acid and dicyandiamide, which was used for the differentiation of cancer/normal cells and the selective photothermal therapy (PTT) of cancer cells. When the smart CNDs were cultured with cells, they were highly internalized in the lysosomes of cells. Since the small-sized CNDs (about 5 nm) tends to form aggregation (as large as about 20 nm or even larger) under an acid condition (pH = 4.7) due to the electrostatic attraction produced by the surface protonation, relatively severer aggregation of the CNDs were observed in liver cancer cells (HepG2 cells) relative to normal ones (LO2 cells) due to a relative lower pH in the lysosomes of HepG2 cells, which endows them a new strong absorption band at longer wavelengths (450-900 nm) and a higher photothermal conversion efficiency (42.13 %), benefiting to differentiated PTT. The flow cytometric data indicates strong photothermal ablation (8 min, 509.6 mW/cm²) for cancer cells with the assistance of these smart CNDs achieves 82 % death rate of cancer cells, while much less damage is observed on the normal cells (6.35 %). To the best of our knowledge, this is the first report about CNDs for selective PTT owing to their intrinsic property without the aid of any other targeting ligands. These smart CNDs are also available for other acid-responsive sensing systems, and this study inspires us in the synthesis of near-infrared featured carbon materials.

Aqueous stable Pd nanoparticles/covalent organic framework nanocomposite: an efficient nanoenzyme for colorimetric detection and multicolor imaging of cancer cells

Accurate, sensitive detection of cancer cells from clinical fluids is helpful for screening and early diagnosis of tumors. Here, we develop a facile approach for in situ growth of palladium nanoparticles in an aqueous stable carboxymethyl cellulose-modified covalent organic framework hydrogel (named Pd NPs/CMC-COF-LZU1). The resulting nanocomposite has been proven to show superior catalytic performance for the transformation of N-butyl-4-NHAlloc-1,8-naphthalimide (NNPH) into N-butyl-4-amido-1,8-naphthalimide (NPH), indicated by significant changes in both color and fluorescence. Based on these features, the designed nanocomposite was used as a signal transducer to develop a colorimetric assay and multicolor imaging for accurate and sensitive detection of cancer cells. The transformation of NNPH into NPH enabled the detection system to perform multicolor imaging of HeLa cells. By using folic acid (FA) as a recognition element, a total of 100 cancer cells (HeLa) can be distinguished in 1 mL culture medium with 10% FBS. We envision that these COF-based composite materials (Pd NPs/CMC-COF-LZU1) have tremendous potential applications in biotechnology and biological sciences.

Disulfide bond-based self-crosslinked carbon-dots for turn-on fluorescence imaging of GSH in living cells

A self-quenched nanoprobe built on a disulfide bond-based crosslink of carbon-dots has been constructed for intracellular GSH sensing.

Rational Design of Multi-Color-Emissive Carbon Dots in a Single Reaction System by Hydrothermal

As an emerging building unit, carbon dots (CDs) have been igniting the revolutionaries in the fields of optoelectronics, biomedicine, and bioimaging. However, the difficulty of synthesizing CDs in aqueous solution with full-spectrum emission severely hinders further investigation of their emission mechanism and their extensive applications in white light emitting diodes (LEDs). Here, the full-color-emission CDs with a unique structure consisting of sp 3-hybridized carbon cores with small domains of partially sp 2-hybridized carbon atoms are reported. First-principle calculations are initially used to predict that the transformation from sp 3 to sp 2 hybridization redshifts the emission of CDs. Guided by the theoretical predictions, a simple, convenient, and controllable route to hydrothermally prepare CDs in a single reaction system is developed. The prepared CDs have full-spectrum emission with an unprecedented two-photon emission across the whole visible color range. These full-color-emission CDs can be further nurtured by slight modifications of the reaction conditions (e.g., temperature, pH) to generate the emission color from blue to red. Finally a flexible LEDs with full-color emission by using epoxy CDs films is developed, indicating that the strategy affords an industry translational potential over traditional fluorophores.

A rare-earth-free self-activated phosphor: Li2TiSiO5 with TiO5 square pyramids

Li₂TiSiO₅ shows a broad emission band covering the visible region due to the coexistence of TiO₅ and TiO₆ polyhedra.

High production-yield solid-state carbon dots with tunable photoluminescence for white/multi-color light-emitting diodes

Plastic waste is generally resistant to natural degradation and has become a major environmental pollution problem globally. The pollution of ecosystems seriously affects the health and survival of organisms, including humans. Much attention has been paid to finding suitable ways to convert plastic waste into high-value-added carbon materials. To this end, we report the high production yield (60%-85%) of carbon dots (CDs) for solid-state fluorescence (SSF) obtained by a one-step solvothermal method using waste expanded polystyrene as the precursor. The SSF mechanism of the CDs was also explored. Their emission wavelength, with a large full width at half maximum of 150-200 nm, exhibited tunable photoluminescence from white to yellow and orange. CDs powder was used to fabricate single-component white and multi-colour light-emitting diodes on UV chips. Overall, plastic waste was converted into tunable solid-state fluorescent CDs powder, which has promising applications in carbon-based lighting, by a simple solvothermal method that provides a viable method for recycling plastic waste.