Polymer brushes: surface-immobilized macromolecules

Controlling orientation, conformation, and biorecognition of proteins on silane monolayers, conjugate polymers, and thermo-responsive polymer brushes: investigations using TOF-SIMS and principal component analysis

Control over orientation and conformation of surface-immobilized proteins, determining their biological activity, plays a critical role in biointerface engineering. Specific protein state can be achieved with adjusted surface preparation and immobilization conditions through different types of protein-surface and protein-protein interactions, as outlined in this work. Time-of-flight secondary ion mass spectroscopy, combining surface sensitivity with excellent chemical specificity enhanced by multivariate data analysis, is the most suited surface analysis method to provide information about protein state. This work highlights recent applications of the multivariate principal component analysis of TOF-SIMS spectra to trace orientation and conformation changes of various proteins (antibody, bovine serum albumin, and streptavidin) immobilized by adsorption, specific binding, and covalent attachment on different surfaces, including self-assembled monolayers on silicon, solution-deposited polythiophenes, and thermo-responsive polymer brushes. Multivariate TOF-SIMS results correlate well with AFM data and binding assays for antibody-antigen and streptavidin-biotin recognition. Additionally, several novel extensions of the multivariate TOF-SIMS method are discussed.

Graphical abstract

Mixed Polymer Brushes for "Smart" Surfaces

Mixed polymer brushes (MPBs) are composed of two or more disparate polymers covalently tethered to a substrate. The resulting phase segregated morphologies have been extensively studied as responsive "smart" materials, as they can be reversible tuned and switched by external stimuli. Both computational and experimental work has attempted to establish an understanding of the resulting nanostructures that vary as a function of many factors. This contribution highlights state-of-the-art MPBs studies, covering synthetic approaches, phase behavior, responsiveness to external stimuli as well as novel applications of MPBs. Current limitations are recognized and possible directions for future studies are identified.

Drug-Directed Morphology Changes in Polymerization-Induced Self-Assembly (PISA) Influence the Biological Behavior of Nanoparticles

The effect of the hydrophobic block length on the morphologies of polymerization-induced self-assembled (PISA) nanoparticles is well understood. However, the influence of drug loading on the phase morphology of the nanoparticles during the PISA process, and the resulting biological function of PISA nanoparticles, has barely been investigated. In this work, we show that the addition of a drug, curcumin, during the PISA process shifts the phase diagram toward different morphologies. The PISA system was based on hydrophilic poly(2-(methacryloyloxy)ethylphosphorylcholine) (PMPC), which was chain extended with hydrophobic methyl methacrylate (MMA) in various concentrations of curcumin. According to transmission electron microscopy, the presence of curcumin led to the transition of, for example, worms to polymersome and micelles to worms analysis. To understand the interaction between polymer particles and drug, small-angle X-ray scattering (SAXS), small-angle neutron scattering (SANS), and fluorescence lifetime measurements were carried out. These measurements show that curcumin is predominantly located in the core in the case of micelles and worms while it is found in the shell of polymersomes. The change in morphology influences the cellular uptake by MCF-7 cells and the movement of the particles in multicellular cancer spheroids (3D model). With the increasing amount of drug, the cellular uptake of micelles and worms was enhanced with the increasing grafting density of MPC chains, which contrasts the decreasing cellular uptake in the higher drug-loaded polymersomes due to the lower shell hydration.

Cationic Polymer Brush/Giant Polysaccharide Sacran Assembly: Structure and Lubricity

A highly effective aqueous lubrication strategy employing electrostatic assembly of a negatively charged ultrahigh molecular weight natural polysaccharide named "sacran" and a positively charged poly[2-(methacryloyloxy)ethyltrimethylammonium chloride] (PMTAC) brush was investigated. The PMTAC brush was compressed through the adsorption of sacran to produce the layered structure of a PMTAC brush/sacran hybrid bottom layer and a poorly hydrated sacran top layer. The dynamic friction coefficients of the PMTAC brush were drastically reduced in salt-free sacran aqueous solutions, and the lubrication mode transition from the brush-lubrication regime to hydrodynamic lubrication was promoted. The electrostatic assembly was inhibited by the addition of NaCl into the lubricant solutions, leading to the loss of the lubrication effect. The hydrodynamic lubrication would be encouraged by the local viscosity enhancement at the friction boundary due to the poorly hydrated and highly viscous PMTAC brush/sacran hybrid film produced by the spontaneous electrostatic assembly.

Glycopolymer Brushes by Reversible Deactivation Radical Polymerization: Preparation, Applications, and Future Challenges

The cellular surface contains specific proteins, also known as lectins, that are carbohydrates receptors involved in different biological events, such as cell-cell adhesion, cell recognition and cell differentiation. The synthesis of well-defined polymers containing carbohydrate units, known as glycopolymers, by reversible deactivation radical polymerization (RDRP) methods allows the development of tailor-made materials with high affinity for lectins because of their multivalent interaction. These polymers are promising candidates for the biomedical field, namely as novel diagnostic disease markers, biosensors, or carriers for tumor-targeted therapy. Although linear glycopolymers are extensively studied for lectin recognition, branched glycopolymeric structures, such as polymer brushes can establish stronger interactions with lectins. This specific glycopolymer topology can be synthesized in a bottlebrush form or grafted to/from surfaces by using RDRP methods, allowing a precise control over molecular weight, grafting density, and brush thickness. Here, the preparation and application of glycopolymer brushes is critically discussed and future research directions on this topic are suggested.

Grafting To of Bottlebrush Polymers: Conformation and Kinetics

Specifically adsorbed bottlebrush coatings are found in nature as brush-like glycoproteins that decorate biointerfaces and provide antifouling, lubrication, or wear-protection. Although various synthetic strategies have been developed to mimic glycoprotein structure and function, the use of these mimics is still limited because of the current lack of understanding of their adsorption behavior and surface conformation. In this paper, we examine the adsorption behavior of PEG-based, biotinylated bottlebrushes with different backbone and bristle lengths to streptavidin model surfaces in phosphate-buffered saline. By using quartz crystal microbalance, localized surface plasmon resonance, and atomic force microscopy, we learn how bottlebrush dimensions impact their adsorption kinetics, surface conformation, mechanical properties, and antifouling properties. Our bottlebrushes qualitatively mirror the adsorption behavior of linear polymers and exhibit three kinetic regimes of adsorption: (I) a transport-limited regime, (II) a pause, and (III) a penetration-limited regime. Furthermore, we find that the bristle length more dramatically affects brush properties than the backbone length. Generally, larger bottlebrush dimensions lead to reduced molar adsorption, retarded kinetics, weaker antifouling, and softer brush coatings. Longer bristles also lead to less mass adsorption, while the opposite trend is observed for increasing backbone length. In summary, our findings aid the rational design of new bottlebrush coatings by elucidating how their dimensions impact adsorption, surface conformation, and the properties of the final coating.

Waste tire rubber as low-cost and environmentally-friendly modifier in thermoset polymers - A review

Nowadays, waste tire rubber (WTR) management is a growing and serious problem. Therefore, research works focused on the development of cost-effective and environmentally-friendly methods of WTR recycling are fully justified. Incorporation of WTR into polymer matrices and composite materials attracts much attention, because this approach allows sustainable development of industrially applicable waste tires recycling technologies. Generally, utilization of WTR as a filler for polymer composites noticeably reduces materials costs, while suitable modification/functionalization of WTR may significantly enhance the performance of plastics and rubbers. This work aims to summarize the literature reports related to the thermoset/WTR composites based on various matrices such as: polyurethanes, epoxy and other resins. It particularly focuses on compatibilization strategies in thermosets/WTR systems and their impact on the chemistry and physical interfacial interactions between thermoset matrix and WTR filler phase, what significantly affecting performance properties of prepared materials. Moreover, future trends and limitation related to thermoset/WTR composites development are discussed.

A Facile Surface Functionalization Method for Polymers Using a Nonsolvent

Surface treatment of polymeric solids without impairing their bulk properties is a crucial functionalization strategy for the promotion of their wider application. We here propose a facile method using a nonsolvent which can subtly alter or swell the polymer surface to be modified. A thin film of poly(methyl methacrylate) (PMMA) was immersed in a methanol solution of poly(2-methoxyethyl acrylate) (PMEA). Electron spectroscopy for chemical analysis and neutron reflectometry revealed that a PMEA layer formed on the PMMA film with a diffused interface. The PMEA layer was very swollen in water and exhibited the ability to suppress serum protein adsorption and platelet adhesion on it. The functionalization technique using a nonsolvent was also applicable to the surface of other polymeric solids such as polyurethane.

Functionalization of carbon nanotubes by combination of controlled radical polymerization and "grafting to" method

This paper reviews the recent advances in non-covalent and covalent tethering of small molecules and polymer chains onto carbon nanotube (CNT) and its derivatives. The functionalized CNT has recently attracted great attention because of an increasing number of its potential applications. In non-covalent functionalization of CNT, the sp²-hybridized network plays a crucial role. The non-covalent grafting of small molecules and polymers can mainly be carried out through hydrogen bonding and π-stacking interactions. In covalent functionalization of CNT, condensation, cycloaddition, and addition reactions play a key role. Polymer modification has been reported by using three main methods of "grafting from", "grafting through", and also "grafting to". The "grafting from" and "grafting through" rely on propagation of polymer chains in the presence of CNT modified with initiator and double bond moieties, respectively. In "grafting to" method, which is the main aim of this review, the pre-fabricated polymer chains are mainly grafted onto the surface using coupling reactions. The coupling reactions are used for grafting pre-fabricated polymer chains and also small molecules onto CNT. Recent studies on grafting polymer chains onto CNT via "grafting to" method have focused on the pre-fabricated polymer chains by conventional and controlled radical polymerization (CRP) methods. CRP includes reversible activation, atom transfer, degenerative (exchange) chain transfer, and reversible chain transfer mechanisms, and could result in polymer-grafted CNT with narrow polydispersity index of the grafted polymer chains. Based on the mentioned mechanisms, nitroxide-mediated polymerization, atom transfer radical polymerization, and reversible addition-fragmentation chain transfer are known as the three commonly used CRP methods. Such polymer-modified CNT has lots of applications in batteries, biomedical fields, sensors, filtration, solar cells, etc.

Surface-Initiated Atom Transfer Polymerized Anionic Corona on Gold Nanoparticles for Anti-Cancer Therapy

Surface initiated atom transfer radical polymerization (SI-ATRP) documented a simple but efficient technique to grow a dense polymer layer on any surface. Gold nanoparticles (AuNPs) give a broad surface to immobilize sulfhyryl group-containing initiators for SI-ATRP; in addition, AuNPs are the major nanoparticulate carriers for delivery of anti-cancer therapeutics, since they are biocompatible and bioinert. In this work, AuNPs with a disulfide initiator were polymerized with sulfoethyl methacrylate by SI-ATRP to decorate the particles with anionic corona, and branched polyethyeleneimine (PEI) and siRNA were sequentially layered onto the anionic corona of AuNP by electrostatic interaction. The in vitro anti-cancer effect confirmed that AuNP with anionic corona showed higher degrees of apoptosis as well as suppression of the oncogene expression in a siRNA dose-dependent manner. The in vivo study of tumor-bearing nude mice revealed that mice treated with c-Myc siRNA-incorporated AuNPs showed dramatically decreased tumor size in comparison to those with free siRNA for 4 weeks. Furthermore, histological examination and gene expression study revealed that the decorated AuNP significantly suppressed c-Myc expression. Thus, we envision that the layer-by-layer assembly on the anionic brushes can be potentially used to incorporate nucleic acids onto metallic particles with high transfection efficiency.

Polymer brush hypersurface photolithography

Polymer brush patterns have a central role in established and emerging research disciplines, from microarrays and smart surfaces to tissue engineering. The properties of these patterned surfaces are dependent on monomer composition, polymer height, and brush distribution across the surface. No current lithographic method, however, is capable of adjusting each of these variables independently and with micrometer-scale resolution. Here we report a technique termed Polymer Brush Hypersurface Photolithography, which produces polymeric pixels by combining a digital micromirror device (DMD), an air-free reaction chamber, and microfluidics to independently control monomer composition and polymer height of each pixel. The printer capabilities are demonstrated by preparing patterns from combinatorial polymer and block copolymer brushes. Images from polymeric pixels are created using the light reflected from a DMD to photochemically initiate atom-transfer radical polymerization from initiators immobilized on Si/SiO2 wafers. Patterning is combined with high-throughput analysis of grafted-from polymerization kinetics, accelerating reaction discovery, and optimization of polymer coatings.

The synergistic effect of hierarchical structure and alkyl chain length on the antifouling and bactericidal properties of cationic/zwitterionic block polymer brushes

A well-organized hierarchical structure and appropriate alkyl chain length facilitate the synergistic anti-biofilm effect.

Surface Modification with Control over Ligand Density for the Study of Multivalent Biological Systems

In the study of multivalent interactions at interfaces, as occur for example at cell membranes, the density of the ligands or receptors displayed at the interface plays a pivotal role, affecting both the overall binding affinities and the valencies involved in the interactions. In order to control the ligand density at the interface, several approaches have been developed, and they concern the functionalization of a wide range of materials. Here, different methods employed in the modification of surfaces with controlled densities of ligands are being reviewed. Examples of such methods encompass the formation of self-assembled monolayers (SAMs), supported lipid bilayers (SLBs) and polymeric layers on surfaces. Particular emphasis is given to the methods employed in the study of different types of multivalent biological interactions occurring at the functionalized surfaces and their working principles.

Antifouling strategies in advanced electrochemical sensors and biosensors

A review presented recent development of antifouling strategies in electrochemical sensors and biosensors based on the modification methods.

A mussel-inspired catecholic ABA triblock copolymer exhibits better antifouling properties compared to a diblock copolymer

The scheme of the chemical architecture, aggregation, assembly and antifouling properties of two copolymers.

An in situ shearing x-ray measurement system for exploring structures and dynamics at the solid-liquid interface

Revealing interfacial structure and dynamics has been one of the essential thematic topics in material science and condensed matter physics. Synchrotron-based x-ray scattering techniques can deliver unique and insightful probing of interfacial structures and dynamics, in particular, in reflection geometries with higher surface and interfacial sensitivity than transmission geometries. We demonstrate the design and implementation of an in situ shearing x-ray measurement system, equipped with both inline parallel-plate and cone-and-plate shearing setups and operated at the advanced photon source at Argonne National Laboratory, to investigate the structures and dynamics of end-tethered polymers at the solid-liquid interface. With a precise lifting motor, a micrometer-scale gap can be produced by aligning two surfaces of a rotating upper shaft and a lower sample substrate. A torsional shear flow forms in the gap and applies tangential shear forces on the sample surface. The technical combination with nanoscale rheology and the utilization of in situ x-ray scattering allow us to gain fundamental insights into the complex dynamics in soft interfaces under shearing. In this work, we demonstrate the technical scope and experimental capability of the in situ shearing x-ray system through the measurements of charged polymers at both flat and curved interfaces upon shearing. Through the in situ shearing x-ray scattering experiments integrated with theoretical simulations, we aim to develop a detailed understanding of the short-range molecular structure and mesoscale ionic aggregate morphology, as well as ion transport and dynamics in soft interfaces, thereby providing fundamental insight into a long-standing challenge in ionic polymer brushes with a significant technological impact.

Formation of Ligand Clusters on Multimodal Chromatographic Surfaces

Multimodal chromatography is a powerful tool which uses multiple modes of interaction, such as charge and hydrophobicity, to purify protein-based therapeutics. In this work, we performed molecular dynamics simulations of a series of multimodal cation-exchange ligands immobilized on a hydrophilic self-assembled monolayer surface at the commercially relevant surface density (1 ligand/nm²). We found that ligands that were flexible and terminated in a hydrophobic group had a propensity to aggregate on the surface, while less flexible ligands containing a hydrophobic group closer to the surface did not aggregate. For aggregating ligands, this resulted in the formation of a surface pattern that contained relatively large patches of hydrophobicity and charge whose sizes exceeded the length scale of the individual ligands. On the other hand, lowering the surface density to 1 ligand/3 nm² reduced or eliminated this aggregation behavior. In addition, the introduction of a flexible linker (corresponding to the commercially available ligand) enhanced cluster formation and allowed aggregation to occur at lower surface densities. Further, the use of flexible linkers enabled hydrophobic groups to collapse to the surface, reducing their accessibility. Finally, we developed an approach for quantifying differences in the observed surface patterns by calculating distributions of the patch size and patch length. This clustering phenomenon is likely to play a key role in governing protein-surface interactions in multimodal chromatography. This new understanding of multimodal surfaces has important implications for developing improved predictive models and designing new classes of multimodal separation materials.

Polymer grafting on graphene layers by controlled radical polymerization

In situ controlled radical polymerization (CRP) is considered as an important approach to graft polymer brushes with controlled grafting density, functionality, and thickness on graphene layers. Polymers are tethered with chain end or through its backbone to the surface or edge of graphene layers with two in situ polymerization methods of "grafting from" and "grafting through" and also a method based on coupling reactions known as "grafting to". The "grafting from" method relies on the propagation of polymer chains from the surface- or edge-attached initiators. The "grafting through" method is based on incorporation of double bond-modified graphene layers into polymer chains through the propagation reaction. The "grafting to" technique involves attachment of pre-fabricated polymer chains to the graphene substrate. Here, physical and chemical attachment approaches are also considered in polymer-modification of graphene layers. Combination of CRP mechanisms of reversible activation, degenerative (exchange) chain transfer, atom transfer, and reversible chain transfer with various kinds of grafting reactions makes it possible to selectively functionalize graphene layers. The main aim of this review is assessment of the recent advances in the field of preparation of polymer-grafted graphene substrates with well-defined polymers of controlled molecular weight, thickness, and polydispersity index. Study of the opportunities and challenges for the future works in controlling of grafting density, site-selectivity in grafting, and various topologies of the brushes with potential applications in stimuli-responsive surfaces, polymer composites, Pickering emulsions, coating technologies, and sensors is also considered.

The Surface Science of Microarray Generation-A Critical Inventory

Microarrays are powerful tools in biomedical research and have become indispensable for high-throughput multiplex analysis, especially for DNA and protein analysis. The basis for all microarray processing and fabrication is surface modification of a chip substrate and many different strategies to couple probe molecules to such substrates have been developed. We present here a critical assessment of typical biochip generation processes from a surface science point of view. While great progress has been made from a molecular biology point of view on the development of qualitative assays and impressive results have been obtained on the detection of rather low concentrations of DNA or proteins, quantitative chip-based assays are still comparably rare. We argue that lack of stable and reliable deposition chemistries has led in many cases to suboptimal quantitative reproducibility, impeded further progress in microarray development and prevented a more significant penetration of microarray technology into the diagnostic market. We suggest that surface-attached hydrogel networks might be a promising strategy to achieve highly sensitive and quantitatively reproducible microarrays.

Mechanochemical Degrafting of a Surface-Tethered Poly(acrylic acid) Brush Promoted Etching of Its Underlying Silicon Substrate

The stability of surface-tethered polyelectrolyte brushes has been investigated during the past few years. We have previously reported on the degrafting of poly(acrylic acid) (PAA) polymer brushes from flat silicon substrates. Here, we present a detailed study on the effects of NaCl concentration and the grafting density and molecular weight on the stability of PAA brushes during incubation in 0.1 M ethanolamine buffer (pH 9.0) solutions. Without NaCl in the buffer solution, the PAA brushes remain intact. Adding NaCl facilitates etching of the substrate due to accelerating dissolution of the top silica layer and promoting degrafting of the PAA chains. The PAA grafting density and molecular weight play an important role in the substrate etching by affecting the penetration barrier and local concentration of the etchants. We also tested the stability of self-assembled monolayers (SAMs) made of hydrophobic alkyltrichlorosilanes anchored on silicon substrates. The results demonstrated that the SAMs were too thin to protect the substrates from etching, in contrast to thick poly(methyl methacrylate) brushes. Our findings suggest that both polymer brushes (especially polyelectrolyte brushes) and SAMs anchored to silicon substrates may undergo erosion/etching on the substrates in basic environments, which compromises their stability and therefore jeopardizes their applications in coating, biosensing, and so forth.

Directed Nanoparticle Assembly through Polymer Crystallization

Nanoparticles can be assembled into complex structures and architectures by using a variety of methods. In this review, we discuss recent progress of using polymer crystallization (particularly polymer single crystals, PSCs) to direct nanoparticle assembly. PSCs have been extensively studied since 1957. Mainly appearing as quasi-two-dimensional (2D) lamellae, PSCs are typically used as model systems to determine polymer crystalline structures, or as markers to investigate the crystallization process. Recent research has demonstrated that they can also be used as nanoscale functional materials. Herein, we show that nanoparticles can be directed to assemble into complex shapes by using in situ or ex situ polymer crystal growth. End-functionalized polymers can crystallize into 2D nanosheet PSCs, which are used to conjugate with complementary nanoparticles, leading to a nanosandwich structure. These nanosandwiches can find interesting applications for catalysis, surface-enhanced Raman spectroscopy, and nanomotors. Dissolution of the nanosandwich leads to the formation of Janus nanoparticles, providing a unique method for asymmetric nanoparticle synthesis.

Self-Assembled Polymeric Membranes and Nanoassemblies on Surfaces: Preparation, Characterization, and Current Applications

Biomembranes play a crucial role in a multitude of biological processes, where high selectivity and efficiency are key points in the reaction course. The outstanding performance of biological membranes is based on the coupling between the membrane and biomolecules, such as membrane proteins. Polymer-based membranes and assemblies represent a great alternative to lipid ones, as their presence not only dramatically increases the mechanical stability of such systems, but also opens the scope to a broad range of chemical functionalities, which can be fine-tuned to selectively combine with a specific biomolecule. Tethering the membranes or nanoassemblies on a solid support opens the way to a class of functional surfaces finding application as sensors, biocomputing systems, molecular recognition, and filtration membranes. Herein, the design, physical assembly, and biomolecule attachment/insertion on/within solid-supported polymeric membranes and nanoassemblies are presented in detail with relevant examples. Furthermore, the models and applications for these materials are highlighted with the recent advances in each field.

The solute mechanical properties impact on the drying of dairy and model colloidal systems

The evaporation of colloidal solutions is frequently observed in nature and in everyday life. The investigation of the mechanisms taking place during the desiccation of biological fluids is currently a scientific challenge with potential biomedical and industrial applications. In the last few decades, seminal works have been performed mostly on dried droplets of saliva, urine and plasma. However, the full understanding of the drying process in biocolloids is far from being achieved and, notably, the impact of solute properties on the morphological characteristics of the evaporating droplets, such as colloid segregation, skin formation and crack pattern development, is still to be elucidated. For this purpose, the use of model colloidal solutions, whose rheological behavior is more easily deducible, could represent a significant boost. In this work, we compare the drying of droplets of whey proteins and casein micelles, the two main milk protein classes, to that of dispersions of silica particles and polymer-coated silica particles, respectively. The mechanical behavior of such biological colloids and model silica dispersions was investigated through the analysis of crack formation, and the measurements of their mechanical properties using indentation testing. The study reveals numerous analogies between dairy and the corresponding model systems, thus confirming the latter as a plausible powerful tool to highlight the signature of the matter at the molecular scale during the drying process.

Polysaccharides at fluid interfaces of food systems

Fabrication of next generation polysaccharides with interfacial properties is driven by the need to create high performance surfactants that operate at extreme environments, as for example in complex food formulations or in the gastrointestinal tract. The present review examines the behaviour of polysaccharides at fluid food interfaces focusing on their performance in the absence of any other intentionally added interfacially active components. Relevant theoretical principles of colloidal stabilisation using concepts that have been developed for synthetic polymers at interfaces are firstly introduced. The role of protein that in most cases is present in polysaccharide preparations either as contaminant or as integral part of the structure is also discussed. Critical assessment of the literature reveals that although protein may contribute to emulsion formation mostly as an anchor for polysaccharides to attach, it is not the determinant factor for the long-term emulsion stability, irrespectively of polysaccharide structure. Interfacial performance of key polysaccharides is also assessed revealing shared characteristics in their modes of adsorption. Conformation of polysaccharides, as affected by the composition of the aqueous solvent needs to be closely controlled, as it seems to be the underlying fundamental cause of stabilisation events and appears to be more important than the constituent polysaccharide sugar-monomers. Finally, polysaccharide adsorption is better understood by regarding them as copolymers, as this approach may assist to better control their properties with the aim to create the next generation biosurfactants.

Polymer Brushes Immersed in Two-Component Solvents with Pure Volume Exclusion: Effect of Solvent Molecular Shape

Polymer brushes have wide application in surface modification. We study dense, short polymer brushes immersed in a mixing solvent under athermal conditions using the classical density functional theory. The brush polymer is short so that the equilibrium behavior of the brush deviates far from the scaling laws for infinite brush chains. The excluded volume interaction is the only interaction in the system. We compare the excluded volume effect of solvent molecules of different shapes. Two types of mixing solvents are considered: solvent composed of linear oligomers and monomers, or that of spherical particles and monomers. The effects of grafting density, solvent molecular size, and solvent number density on the brush height, the density profiles, the relative excess adsorption, and the brush-solvent interface width are systematically analyzed. In the adsorption aspect, the spherical particles have stronger ability than the linear oligomers do to penetrate through the brush layer and gather at the substrate. In the screening aspect, the oligomers are more capable of screening the excluded volume interaction between the brush chains than the spherical particles. The brush-solvent interface width decreases monotonically with increasing oligomer length, but it has a minimum with the increasing spherical particle size. Our research differentiates the attractive-interaction-induced phenomenon and the volume-exclusion-induced phenomenon in dense brush systems and exhibits the difference in the antifouling properties of the brushes contacting solvent molecules of different shapes.

Quantifying Solvent Effects on Polymer Surface Grafting

When grafting polymers onto surfaces, the reaction conditions critically influence the resulting interface properties, including the grafting density and molar mass distribution (MMD) on the surface. Herein, we show theoretically and experimentally that the application of poor solvents is beneficial for the "grafting-to" approach. We demonstrate the effect by grafting poly(methyl methacrylate) chains on silica nanoparticles in different solvents and compare the MMD of the polymer in solution before and after grafting via size exclusion chromatography (SEC). The shorter polymer chains are preferentially grafted onto the surface, leading to a distortion effect between the MMD in solution and on surfaces. The molecular weight distortion effect is significantly higher for ethyl acetate (good solvent quality, difference in M_w surface to solution 14%) than for N,N-dimethylacetamide (poor solvent quality, 6%). The difference in MMD on the surface to the solution significantly affects both the surface properties (e.g. the grafting densities) and their determination.

Surface Reconstruction by a Coassembly Approach

Materials with switchable surfaces, capable of changing surface properties under external stimuli, are playing a pivotal role in many applications, such as tissue engineering, biosensors, and drug/protein delivery. In this research silica particles with patterned and switchable surfaces are fabricated. Surface micelles on silica particles are formed by coassembly of polymer brushes and "free" block copolymer chains in a selective solvent. The cores of the surface micelles are crosslinked by anthracene photodimerization. After quaternization of the coronae, amphiphilic surface micelles are prepared. The surface micelles are able to rearrange in different media. After treatment with an organic solvent, the surfaces of silica particles are occupied by hydrophobic polymer components; in aqueous solution, the positively charged polymer chains are on the surfaces. The switching of the surface micelles results in changes in surface composition and wetting behaviors.

Functionalization and Patterning of Self-Assembled Monolayers and Polymer Brushes Using Microcontact Chemistry

Because the surface connects a material to its environment, the functionalization, modification, and patterning of surfaces is key to a wide range of materials applied in microelectronics, displays, sensing, microarrays, photovoltaics, catalysis, and other fields. Self-assembled monolayers (SAMs), which can be deposited on a wide range of inorganic materials, are only a few nanometers thick, yet they can radically change the properties of the resulting interface. Alternatively, thin polymer films composed of polymer brushes grown from the surface provide a more robust molecular modification of inorganic materials. For many applications, patterned SAMs or polymer brushes are desired. Over the past decade, our group has shown that both SAMs as well as polymer brushes can be patterned very efficiently using microcontact printing. In microcontact printing, a molecular "ink" is deposited on a suitable substrate using a microstructured elastomer stamp, which delivers the ink exclusively in the area of contact between stamp and substrate. In contrast to most types of lithography, microcontact printing does not require expensive equipment. Our work has shown that "microcontact chemistry" is a powerful additive surface patterning method, in which molecular inks react with a precursor SAM during printing so that surfaces can be modified with various orthogonal functional groups or molecular recognition sites in microscale patterns. Functional groups include reactive groups for click chemistry or photochemistry and initiators for radical polymerization. Molecular recognition sites include host-guest chemistry as well as biochemical ligands such as carbohydrates and biotin. In this Account, we present an overview of our research in this area including selected examples of work by other groups. In the first part, we review our work on the patterning of SAMs using microcontact chemistry, with a focus on click chemistry and photochemistry. We will show how cycloadditions, thiol-ene reactions, and tetrazole chemistry can be used to obtain versatile surface patterns. In the second part, we demonstrate that microcontact chemistry can be used to pattern polymer brushes. Among others, initiators for surface-induced nitroxide-mediated polymerization and atom transfer polymerization were printed and used to grow patterned polymer brushes with molecular recognition groups suitable for responsive surface adhesion. In the third part, we describe how SAMs and polymer brushes can be printed on microparticles instead of flat substrates so that Janus particles with functional patches can be obtained. Finally, we present a brief outlook on further developments expected in this field.

Hierarchy of Hybrid Materials-The Place of Inorganics-in-Organics in it, Their Composition and Applications

Hybrid materials, or hybrids incorporating both organic and inorganic constituents, are emerging as a very potent and promising class of materials due to the diverse, but complementary nature of the properties inherent of these different classes of materials. The complementarity leads to a perfect synergy of properties of desired material and eventually an end-product. The diversity of resultant properties and materials used in the construction of hybrids, leads to a very broad range of application areas generated by engaging very different research communities. We provide here a general classification of hybrid materials, wherein organics-in-inorganics (inorganic materials modified by organic moieties) are distinguished from inorganics-in-organics (organic materials or matrices modified by inorganic constituents). In the former area, the surface functionalization of colloids is distinguished as a stand-alone sub-area. The latter area-functionalization of organic materials by inorganic additives-is the focus of the current review. Inorganic constituents, often in the form of small particles or structures, are made of minerals, clays, semiconductors, metals, carbons, and ceramics. They are shown to be incorporated into organic matrices, which can be distinguished as two classes: chemical and biological. Chemical organic matrices include coatings, vehicles and capsules assembled into: hydrogels, layer-by-layer assembly, polymer brushes, block co-polymers and other assemblies. Biological organic matrices encompass bio-molecules (lipids, polysaccharides, proteins and enzymes, and nucleic acids) as well as higher level organisms: cells, bacteria, and microorganisms. In addition to providing details of the above classification and analysis of the composition of hybrids, we also highlight some antagonistic yin-&-yang properties of organic and inorganic materials, review applications and provide an outlook to emerging trends.

Surface Modification of 3D Printed PLA Objects by Fused Deposition Modeling: A Review

Polylactic acid (PLA) filaments are very popular as a thermoplastic source used in the 3D printing field by the “Fused Deposition Modeling” method in the last decade. The PLA market is expected to reach 5.2 billion US dollars in 2020 for all of its industrial uses. On the other hand, 3D printing is an expanding technology that has a large economic potential in many industries where PLA is one of the main choices as the source polymer due to its ease of printing, environmentally friendly nature, glossiness and multicolor appearance properties. In this review, we first reported the chemical structure, production methods, general properties, and present market of the PLA. Then, the chemical modification possibilities of PLA and its use in 3D printers, present drawbacks, and the surface modification methods of PLA polymers in many different fields were discussed. Specifically, the 3D printing method where the PLA filaments are used in the extrusion-based 3D printing technologies is reviewed in this article. Many methods have been proposed for the permanent surface modifications of the PLA where covalent attachments were formed such as alkaline surface hydrolysis, atom transfer polymerization, photografting by UV light, plasma treatment, and chemical reactions after plasma treatment. Some of these methods can be applied for surface modifications of PLA objects obtained by 3D printing for better performance in biomedical uses and other fields. Some recent publications reporting the surface modification of 3D printed PLA objects were also discussed.

Design, Synthesis, and Application of a Difunctional Y-Shaped Surface-Tethered Photoinitiator

Mixed homopolymer brushes have unique interfacial properties that can be exploited for both fundamental studies and applications in technology. Herein, the synthesis of a new catechol-based biomimetic Y-shaped binary photoinitiator (Y-photoinitiator) and its applications for surface modification with polymer brushes through both "grafting to" and "grafting from" strategies are reported. The "leg" of the Y consists of a catechol group as surface anchoring moiety. The arms are photoinitiator moieties that can be "addressed" independent of each other by radiation of different wavelengths. Using ultraviolet and visible light successively, each arm of the Y-photoinitiator was activated, thereby allowing the synthesis of Y-shaped block copolymer brushes with dissimilar polymer chains. The suitability of the Y-photoinitiator for surface modification was first investigated using N-vinylpyrrolidone and styrene as the model monomers for successive UV-photoiniferter-mediated polymerization and visible-light-induced polymerization, respectively. Switching of the wetting properties of the Y-shaped block copolymer brush poly( N-vinylpyrrolidone)- block-poly(styrene) (PVP- b-PS)-grafted surfaces by contact with different solvents was also investigated. To further exploit this novel Y-photoinitiator for the preparation of functional interfaces, Y-shaped block copolymer brushes poly(1-(2-methacryloyloxyhexyl)-3-methylimidazolium bromide)- block-poly( N-vinylpyrrolidone- co-glycidyl methacrylate) (PIL(Br)- b-P(NVP- co-GMA)) were also prepared and subsequently functionalized with the cell-adhesive arginine-glycine-aspartic acid (RGD) peptides by reaction with the glycidyl groups (PILPNG-RGD). The PILPNG-RGD grafted surfaces showed excellent cell-adhesive, bacteriostatic, and bactericidal properties. Thus, it can be concluded that further exploitation of this novel Y-photoinitiator for graft polymerization should allow the preparation of a wide range of functional interfaces with tailored properties.

Transition Metal Mediated Living Radical Polymerisation

Living radical polymerisation has witnessed an unprecedented interest from polymer and materials scientists. Traditionally, polymers tended to replace natural materials such as wood, cotton and glass, and were used primarily for their structural features and performance and cost advantages. New functional polymers are essential for the manufacture of cell phones, lap-top computers, new cosmetics, and many pharmaceuticals. It is important to be able to control how monomers are put together within the macromolecule for the design at the molecular level for specific applications. Living polymerisation allows for end group control, polymer chain length and relatively narrow polydispersity polymers. In nature, the ability to control monomer distribution and chain length is obvious with approximately 20 amino acids being the monomers for polymers as diverse as hair, insulin and haemoglobin. Living radical polymerisation solves many of the problems in the use of monomers that contain heteroatoms and functional groups. These tend to be reactive towards strong nucleophiles and electrophiles which are required in ionic polymerisation. Protecting group chemistry as used in small molecule organic synthesis is not practical in polymer synthesis. Thus radicals that are inert to most functional groups and in particular protic species seem to be the answer. The mechanism of the transition metal mediate systems is extremely complicated with a range of organometallic species present in the reaction mixture. Solvents and coordinating monomers drastically affect the ideal reaction conditions and it is impossible to predict the optimum conditions for each synthesis without certain experiments being carried out. Nevertheless, catalyst systems are available which are acceptable and work well enough to be able to make a plethora of different macromolecules for a diverse range of applications /properties.

In situ probing of switchable nanomechanical properties of responsive high-density polymer brushes on poly(dimethylsiloxane): An AFM nanoindentation approach

Nanomechanical characteristics of end grafted polymer brushes were studied by AFM based, colloidal probe nanoindentation measurements. A high-density polymer brush of poly(2-hydroxyethyl methacrylate) (PHEMA) was precisely prepared on the surface of a flexible poly(dimethylsiloxane) (PDMS) substrate oxidized in ultraviolet/ozone (UVO). Exposure times less than 10min resulted in laterally homogeneous oxidized surfaces, characterized by a SiO_x thickness ∼35nm and an increased modulus up to 9MPa, as shown by AFM nanoindentation measurements. We have demonstrated that a high surface density of up to ∼0.63chains/nm² of the well-defined PHEMA brushes can be grown from the surface of oxidized PDMS by surface-initiated atom transfer radical polymerization (SI-ATRP) from trimethoxysilane derivatives mixed-SAM. The reversible nanomechanical changes of PHEMA layer between extended (hydrated state) and collapsed (dehydrated state) chain upon immersing in selective and non-selective solvents were investigated by in situ AFM nanoindentation analysis in liquid environments. The elastic modulus derived from force-indentation curves obtained for swollen PHEMA grafted chains in water was estimated to be equal 2.7±0.2MPa, which is almost two orders of magnitude smaller than the modulus of dry PHEMA brush. Additionally, under cyclohexane immersion, the modulus of the PHEMA layer decreased by one order of magnitude, indicating a more compact chain packing at the PDMS surface.

Free Polyethylenimine Enhances Substrate-Mediated Gene Delivery on Titanium Substrates Modified With RGD-Functionalized Poly(acrylic acid) Brushes

Substrate mediated gene delivery (SMD) is a method of immobilizing DNA complexes to a substrate via covalent attachment or nonspecific adsorption, which allows for increased transgene expression with less DNA compared to traditional bolus delivery. It may also increase cells receptivity to transfection via cell-material interactions. Substrate modifications with poly(acrylic) acid (PAA) brushes may improve SMD by enhancing substrate interactions with DNA complexes via tailored surface chemistry and increasing cellular adhesion via moieties covalently bound to the brushes. Previously, we described a simple method to graft PAA brushes to Ti and further demonstrated conjugation of cell adhesion peptides (i.e., RGD) to the PAA brushes to improve biocompatibility. The objective of this work was to investigate the ability of Ti substrates modified with PAA-RGD brushes (PAA-RGD) to immobilize complexes composed of branched polyethyleneimine and DNA plasmids (bPEI-DNA) and support SMD in NIH/3T3 fibroblasts. Transfection in NIH/3T3 cells cultured on bPEI-DNA complexes immobilized onto PAA-RGD substrates was measured and compared to transfection in cells cultured on control surfaces with immobilized complexes including Flat Ti, PAA brushes modified with a control peptide (RGE), and unmodified PAA. Transfection was two-fold higher in cells cultured on PAA-RGD compared to those cultured on all control substrates. While DNA immobilization measured with radiolabeled DNA indicated that all substrates (PAA-RGD, unmodified PAA, Flat Ti) contained nearly equivalent amounts of loaded DNA, ellipsometric measurements showed that more total mass (i.e., DNA and bPEI, both complexed and free) was immobilized to PAA and PAA-RGD compared to Flat Ti. The increase in adsorbed mass may be attributed to free bPEI, which has been shown to improve transfection. Further transfection investigations showed that removing free bPEI from the immobilized complexes decreased SMD transfection and negated any differences in transfection success between cells cultured on PAA-RGD and on control substrates, suggesting that free bPEI may be beneficial for SMD in cells cultured on bPEI-DNA complexes immobilized on PAA-RGD grafted to Ti. This work demonstrates that substrate modification with PAA-RGD is a feasible method to enhance SMD outcomes on Ti and may be used for future applications such as tissue engineering, gene therapy, and diagnostics.

Enzymatically Degassed Surface-Initiated Atom Transfer Radical Polymerization with Real-Time Monitoring

Polymer brush coatings are frequently prepared by radical polymerization, a notoriously oxygen sensitive process. Glucose oxidase (GOx) can inexpensively enable radical polymerization in solution by enzymatically consuming oxygen as it oxidizes glucose. Here, we report the growth of polymeric brushes using GOx-assisted atom transfer radical polymerization (ATRP) from a surface while open to air. Specifically, we grew a set of biomedically relevant polymer brushes, including poly(oligo(ethylene glycol) methacrylate) (POEGMA), poly(2-dimethylaminoethyl methacrylate) (PDMAEMA), poly(sulfobetaine methacrylate) (PSBMA), and poly(2-(methylsulfinyl)ethyl acrylate (PMSEA). For each of these polymers, we monitored GOx-assisted and GOx-free ATRP reaction kinetics in real time using quartz crystal microbalance (QCM) and verified findings with localized surface plasmon resonance (LSPR). We modeled brush growth kinetics considering bimolecular termination. This model fit our data well ( r² > 0.987 for all samples) and shows the addition of GOx increased effective kinetic chain lengths, propagation rates, and reproducibility. We tested the antifouling properties of the polymer brush coatings against human blood plasma and were surprised to find that coatings prepared with GOx repelled more plasma proteins in all cases than their GOx-free counterparts.