Preparation of microspheres by the solvent evaporation technique

Amphiphilic Polysaccharides Acting both as Stabilizers and Surface Modifiers during Emulsification in Microfluidic Flow-Focusing Junction

A continuous emulsion/solvent diffusion process was designed for the preparation of polysaccharide-covered poly(d,l-lactide) (PLA) microparticles. The emulsification step was carried out in a flow-focusing junction where ethyl acetate containing dissolved PLA was dispersed into an aqueous solution of hydrophobically modified dextran. It was demonstrated that poly(dimethylsiloxane) devices could be used for oil-in-water emulsion preparation provided that the microfluidic devices were preconditioned by simply circulating the aqueous phase containing the amphiphilic polysaccharide during a sufficient time (30 h). The adsorption of the polymers at the surface of the channel walls permitted the wetting by the aqueous phase with a hydrophilic character maintained at least throughout 2 months. The preconditioning time was significantly reduced by pretreating the microfluidic device with piranha solution and KOH solution during 15 min each before the circulation of the aqueous solution of dextran derivative. Dextran-covered PLA microparticle aqueous suspensions were produced with well-controlled size distribution. The suspensions could be lyophilized and reconstituted by retrieving the initial size distribution without adding any cryoprotectant. The reported procedure was used for preparing octyl gallate-loaded PLA microparticles.

Fabrication of Oxygen Releasing Scaffold by Embedding H2O2-PLGA Microspheres into Alginate-Based Hydrogel Sponge and Its Application for Wound Healing

In the regeneration process for new tissues, oxygen promotes re-epithelialization and healing of infected wounds, increases keratinocyte differentiation, proliferation and migration of fibroblast, and induces angiogenesis, collagen synthesis and wound contraction. Therefore, provision of oxygen to cells and tissues at an optimal level is critical for effective tissue regeneration and wound healing. In this study, we developed sustained oxygen-releasing polymeric microspheres and fabricated a sponge type dressing by embedding the microspheres into alginate-based hydrogel that can supply oxygen to wounds. We further investigated the applicability of the microspheres and hydrogel sponge to wound healing in vitro and in vivo. Oxygen-releasing microspheres (ORM) were made by incorporating hydrogen peroxide (H2O2) into poly(lactic-co-glycolic acid) (PLGA) using double emulsion method. H2O2-PLGA microspheres were embedded into alginate-based hydrogel to form a porous oxygen-releasing hydrogel sponge (ORHS). Biocompatibility was performed using cell counting kit-8. The oxygen release kinetic study was performed using a hydrogen peroxide assay kit and oxygen meter. The wound healing potential of ORHS was evaluated using the wound scratch model. In vivo studies were carried out to investigate the safety and efficacy of the ORHS for wound healing. Experimental results confirmed that oxygen released from ORMand ORHS induced neovascularization and promoted cell proliferation thereby facilitating effective wound healing. It is suggested that the ORM can be used for supplying oxygen to where cells and tissues are deprived of necessary oxygen, and ORHS is an intelligent scaffold to effectively heal wound by enhanced angiogenesis by oxygen. Conclusively, oxygen releasing polymeric microspheres and hydrogel scaffolds have potential for a variety of tissue engineering applications, where require oxygen.

Adhesion properties of regenerated lignocellulosic fibres towards poly(lactic acid) microspheres assessed by colloidal probe technique

In the field of polymer reinforcement, it is important to understand the interactions involved between the polymer matrix and the reinforcing component. This paper is a contribution to the fundamental understanding of the adhesion mechanisms involved in natural fibre reinforced composites. We report on the use of the colloidal probe technique for the assessment of the adhesion behaviour between poly(lactic acid) microspheres and embedded cross-sections of regenerated lignocellulosic fibres. These fibres consisted of tailored mixtures of cellulose, lignin and xylan, the amount of which was determined beforehand. The influence of the chemical composition of the fibres on the adhesion behaviour was studied in ambient air and in dry atmosphere. In ambient air, capillary forces resulted in larger adhesion between the sphere and the fibres. Changing the ambient medium to a dry nitrogen atmosphere allowed reducing the capillary forces, leading to a drop in the adhesion forces. Differences between fibres of distinct chemical compositions could be measured only on freshly cut surfaces. Moreover, the surface energy of the fibres was assessed by inverse gas chromatography. Compared to fibres containing solely cellulose, the presence of lignin and/or hemicellulose led to higher adhesion and lower surface energy, suggesting that these chemicals could serve as natural coupling agents between hydrophobic and hydrophilic components.

Modified two-step emulsion solvent evaporation technique for fabricating biodegradable rod-shaped particles in the submicron size range

HYPOTHESIS

Though the emulsion solvent evaporation (ESE) technique has been previously modified to produce rod-shaped particles, it cannot generate small-sized rods for drug delivery applications due to the inherent coupling and contradicting requirements for the formation versus stretching of droplets. The separation of the droplet formation from the stretching step should enable the creation of submicron droplets that are then stretched in the second stage by manipulation of the system viscosity along with the surface-active molecule and oil-phase solvent.

EXPERIMENTS

A two-step ESE protocol is evaluated where oil droplets are formed at low viscosity followed by a step increase in the aqueous phase viscosity to stretch droplets. Different surface-active molecules and oil phase solvents were evaluated to optimize the yield of biodegradable PLGA rods. Rods were assessed for drug loading via an imaging agent and vascular-targeted delivery application via blood flow adhesion assays.

FINDINGS

The two-step ESE method generated PLGA rods with major and minor axis down to 3.2 µm and 700 nm, respectively. Chloroform and sodium metaphosphate was the optimal solvent and surface-active molecule, respectively, for submicron rod fabrication. Rods demonstrated faster release of Nile Red compared to spheres and successfully targeted an inflamed endothelium under shear flow in vitro and in vivo.

Preparation and in vitro/in vivo evaluation of PLGA microspheres containing norquetiapine for long-acting injection

Background

Norquetiapine (N-desalkyl quetiapine, NQ) is an active metabolite of quetiapine with stable pharmacokinetic and pharmacological properties. However, its short half-life is a drawback for clinical applications, and long-acting formulations are required.

Purpose

The objectives of this study were to prepare improved entrapment efficiency NQ freebase microspheres by the solvent evaporation method with poly(d,l-lactic-co-glycolic acid) (PLGA) as a release modulator and to evaluate their physicochemical and in vitro/in vivo release properties.

Methods

NQ freebase PLGA (1:5 w/w) formulations were prepared by the oil-in-water (o/w) emulsion–solvent evaporation method. A solution of the drug and PLGA in 9:1 v/v dichloromethane:ethanol was mixed with 0.2% polyvinyl alcohol and homogenized at 2,800 rpm. The emulsion was stirred for 3 h to dilute and evaporate the solvent. After that, the resulting product was freeze-dried. Drug-loading capacity was measured by the validated RP-HPLC method. The surface morphology of the microspheres was observed by scanning electron microscopy (SEM), and the physicochemical properties were evaluated by differential scanning calorimetry, powder X-ray diffraction, and Fourier-transform infrared spectroscopy particle size distribution. The in vitro dissolution test was performed using a rotary shaking bath at 37°C, with constant shaking at 50 rpm in sink condition.

Results

The NQ freebase microspheres prepared by o/w emulsion-solvent evaporation showed over 30% efficiency. NQ was confirmed to be amorphous in the microspheres by powder X-ray diffraction and differential scanning calorimetry. Special chemical interaction in the microspheres was not observed by FT-IR. The in vitro dissolution test demonstrated that the prepared microspheres’ release properties were maintained for more than 20 days. The in vivo test also confirmed that the particles’ long acting properties were maintained. Therefore, good in vitro–in vivo correlation was established.

Conclusion

In this study, NQ freebase-PLGA microspheres showed potential for the treatment of schizophrenia for long-periods.

Effect of Poly-L-lysine Coating on Retinoic Acid-Loaded PLGA Microspheres in the Differentiation of Carcinoma Stem Cells into Neural Cells

In this study, PLGA microspheres were prepared using a water-in-oil-in-water emulsion/solvent evaporation technique. Some microspheres were coated with poly-L-lysine (an extracellular matrix (ECM) component), and then pluripotent P19 embryonic carcinoma cells were seeded on them. P19 cells attached onto the PLGA microspheres; subsequently, by adding retinoic acid (RA) to cell culture medium as a neurogenic inducer (RA was released from the microspheres), the cells differentiated into neural cells. Size and morphology of PLGA microspheres was characterized by scanning electron microscopy (SEM). Neurogenic differentiation was studied by immunofluorescent staining, real-time polymerase chain reaction (RT-PCR), and light microscopy. Histological assay showed that more cells attached onto microspheres coated with poly-L-lysine than the uncoated group. Immunofluoresent staining and RT-PCR analysis for β-Tubulin, Nestin and Pax6 genes indicated differentiation of P19 cells into neural cells on both coated and uncoated microspheres. It was found that a high surface area of microspheres improves cell attachment and expansion, which was significantly increased in those coated with poly-L-lysine. Finally, these results highlight the versatility of these sample scaffolds as a model system for nerve tissue engineering.

Fabrication of poly (butadiene-block-ethylene oxide) based amphiphilic polymersomes: An approach for improved oral pharmacokinetics of Sorafenib

Sorafenib (SFN), a hydrophobic anticancer drug, has several limitations predominantly poor aqueous solubility and hepatic first-pass effect, limiting its oral delivery that results into several other complications. Present study aims to develop Sorafenib loaded polymersomes using poly butadiene block poly ethylene oxide (PB-b-PEO), an amphiphilic co-block polymer. Prior to drug loading, critical aggregate concentration (CAC) of polymer was calculated for stable formulation synthesis. The developed SFN loaded PB-b-PEO polymersomes (SFN-PB-b-PEO, test formulation) characterized by DLS and cryo-TEM showed particle size 282 nm, polydispersity (PDI) of less than 0.29 and membrane thickness of about 20 nm. SFN-PB-b-PEO polymersomes demonstrated encapsulation efficiency of 71% and showed sustained drug release up to 144 h. Formulation remained stable for 3 months in suspension form. In vitro cytotoxicity against HepG2 cells showed 1.7 folds improved toxicity compared to SFN suspension. In addition, oral administration of SFN-PB-b-PEO polymersomes in BALB/c mice showed increased C_max and AUC_0-96 by 1.7 and 2.77-fold respectively (p < 0.05) compared to those of SFN suspension (reference formulation). Findings suggest that the SFN-PB-b-PEO polymersomes can be a potential candidate for oral delivery of SFN.

Improving the skin penetration and antifebrile activity of ibuprofen by preparing nanoparticles using emulsion solvent evaporation method

Ibuprofen (IBU) is an effective analgesic, non-steroidal anti-inflammatory drug. Unfortunately, oral IBU can cause adverse gastrointestinal drug reactions, such as bleeding and ulcerations, and increases the risk for stomach or intestinal perforations. In this study, IBU nanoparticles (IBU-NPs) were prepared through emulsion solvent evaporation and freeze-drying to improve their solubility. IBU nanoemulsion and nanosuspension were optimized through a single-factor experiment. IBU-NPs with a mean particle size of 216.9±10.7nm were produced under optimum conditions. These IBU-NPs were characterized by using scanning electron microscopy, X-ray diffraction, differential scanning calorimetry, and residual solvent determination to determine their solvent residue, equilibrium solubility, dissolution rate, in vitro transdermal rate, transdermal bioavailability, and antifebrile experiment for febrile rats. The morphological characteristic of IBU-NPs showed porous clusters. Analysis results indicated that the prepared IBU-NPs have low crystallinity. Residual amounts of ethanol and chloroform were 170 and 9.6ppm, respectively, which were less than the ICH limit for class II. Measurement analysis showed that the IBU-NPs were converted underwent amorphous states after preparation, but the chemical structure of the IBU-NPs was unchanged. Transdermal bioavailability of IBU in the IBU-NP group improved significantly compared with oral and transdermal raw IBU. Furthermore, the IBU-NP transdermal gel exhibited a high and stable cooling rate and a long cooling duration in febrile rats. In comparison with the raw oral IBU and raw IBU transdermal gel, the IBU-NP transdermal gel manifested better efficacy at low and mid doses. Basing from the results, we conclude that IBU-NPs can be applied in transdermal delivery formulations and have potential application value for non-oral administration.

Effects of processing parameters on the properties of amphiphilic block copolymer micelles prepared by supercritical carbon dioxide evaporation method

The operation parameters for the supercritical carbon dioxide (ScCO2) evaporation method greatly affect the properties of the prepared drug-loaded micelles. In this study, the effects of those key parameters on the drug-loading content (LC) and drug entrapment efficiency (EE) are discussed. It is observed that EE and LC of the micelles are slightly increased with the enhancing temperature and the copolymer molecular ratio of hydrophilic/hydrophobic segment, while decreased with the enhancing ScCO2 evaporation rate. The pressure and volume ratio of ScCO2 to H2O are observed the optimum condition. In addition, the verification experiment is carried out under the obtained optimizing parameters. The prepared micelles exhibit relatively regular spherical shape and narrow size distribution with the EE and LC value of 70.7% and 14.1%, respectively.

Novel pogostone analogous XW-12-loading nanoparticles display enhanced systematic activity against methicillin-resistant Staphylococcus aureus

Pogostone analogous XW-12 displays an inhibitory effect on Staphylococcus aureus. However, the insolubility of the compound has restricted its further applications. This work aims to improve the water-solubility of XW-12, we used previously synthesised pogostone derivatives XW-12, forming nanoparticles with PLGA-PEG by a single-emulsion solvent-evaporation technique. Characterisations of XW-12 nanoparticles were performed. The in vitro and in vivo experiments confirmed its antimicrobial efficacy and toxicity. The results revealed that the XW-12 NPs had a particle size of approximately 200.0 nm, a slower and sustained release. An antibacterial experiment showed that XW-12 NPs had a lower minimal inhibitory concentration value of 1 μg/mL. In the mouse systemic infection model of MRSA, XW-12 NPs indicated high antibacterial activity. In addition, in vivo, toxicity studies declared that XW-12 NPs had a low cytotoxicity. Therefore, this study suggested that XW-12 NPs may be a great potential antibacterial agent in the treatment of clinical MRSA infection.

Preparation of keratin-based microcapsules for encapsulation of hydrophilic molecules

The interest towards microcapsules based on non-toxic, biodegradable and biocompatible polymers, such as proteins, is increasing considerably. In this work, microcapsules were prepared using water soluble keratin, known as keratoses, with the aim of encapsulating hydrophilic molecules. Keratoses were obtained via oxidizing extraction of pristine wool, previously degreased by Soxhlet. In order to better understand the shell part of microcapsules, pristine wool and obtained keratoses were investigated by FT-IR, gel-electrophoresis and HPLC. Production of the microcapsules was carried out by a sonication method. Thermal properties of microcapsules were investigated by DSC. Microencapsulation and dye encapsulation yields were obtained by UV-spectroscopy. Morphological structure of microcapsules was studied by light microscopy, SEM, and AFM. The molecular weights of proteins analyzed using gel-electrophoresis resulted in the range of 38-62kDa. The results confirmed that the hydrophilic dye (Telon Blue) was introduced inside the keratoses shells by sonication and the final microcapsules diameter ranged from 0.5 to 4µm. Light microscope investigation evidenced the presence of the dye inside the keratoses vesicles, confirming their capability of encapsulating hydrophilic molecules. The microcapsule yield and dye encapsulation yield were found to be 28.87±3% and 83.62±5% respectively.

PLGA-based monolithic filaments prepared by hot-melt extrusion: In-vitro comparative study

To avoid frequent drug administration, PLGA-based monolithic filament-shaped implants were prepared. In this study, the effect of different formulation variables was studied, namely: type of PLGA (PLGA 502 and PLGA 503), type of drug (the lipophilic Prednisolone acetate, PA and the hydrophilic Propranolol Hydrochloride, PH) and drug loading (10 and 30% w/w). PLGA 503-based implants showed a lower water uptake, lower mass loss and erosion, slower drug release, and better mechanical properties and elasticity (P<0.05) compared to the corresponding PLGA 502-based implants. PH-loaded implants showed a faster swelling and degradation as well as drug release (P<0.05) compared to PA-loaded implants; the former attained almost complete drug release after about 18 days, while the latter attained it after about 30 days. All the implants followed a zero-order kinetic pattern suitable for a controlled drug release. Characterization was done using SEM and DSC. This study proved the potential tailoring of the properties of PLGA-implants, prepared by hot-melt extrusion (HME), based on some formulation variables.

A review of recent progress in drug and protein encapsulation: Approaches, applications and challenges

Many drugs and proteins formulated for treatment of various diseases are not fully utilised due to environmentally problems such as degradation by enzymes or it being hydrophobic. To counter this problem, the drug and protein of interest are encapsulated by synthetic polymers where they are protected from the environment. This allows the molecule to reach its target safely and maximise its function. In this paper, we will discuss about the different techniques of encapsulation that includes emulsion evaporation, self-emulsifying drug delivery system and supercritical fluid. This will be followed by the drugs and proteins that are commonly encapsulated to counter life-threatening diseases such as cancer and diabetes. A novel method using foam was proposed and will be briefly discussed as it can play a huge role in future developments.

Encapsulation of Antifouling Organic Biocides in Poly(lactic acid) Nanoparticles

The scope of the current research was to assess the feasibility of encapsulating three commercial antifouling compounds, Irgarol 1051, Econea and Zinc pyrithione, in biodegradable poly(lactic acid) (PLA) nanoparticles. The emulsification–solvent evaporation technique was herein utilized to manufacture nanoparticles with a biocide:polymer ratio of 40%. The loaded nanoparticles were analyzed for their size and size distribution, zeta potential, encapsulation efficiency and thermal properties, while the relevant physicochemical characteristics were correlated to biocide–polymer system. In addition, the encapsulation process was scaled up and the prepared nanoparticles were dispersed in a water-based antifouling paint in order to examine the viability of incorporating nanoparticles in such coatings. Metallic specimens were coated with the nanoparticles-containing paint and examined regarding surface morphology.

Absolute quantification of poly(dl-lactide-co-glycolide) in microspheres using quantitative 1H NMR spectroscopy

The complex nature and the manufacturing process of poly(dl-lactide-co-glycolide) (PLGA), a key component of PLGA-based microspheres, have made the quantification of this copolymer difficult. The main purpose of the current study was to investigate the potential of three different methods for the quantitative analysis of the PLGA content of clinical products. In this regard, leuprorelin acetate microspheres from different vendors were chosen as templates to validate quantitative ¹H nuclear magnetic resonance (qHNMR) spectroscopy, size exclusion chromatography (SEC), and high-performance liquid chromatography (HPLC) methods qHNMR proved to be an excellent and rapid PLGA quantification method compared to the other two. The recovery value was 99.12% and the linearity correlation coefficient was 0.9999. The results obtained from the qHNMR method were found to match the data provided by the vendor, suggesting that qHNMR can be utilized as a reliable quality control and inspection tool for PLGA-based clinical products.

Development of assay for determination of eletriptan hydrobromide in loaded PLGA nanoparticles

Eletriptan Hydrobromide is a serotonin 5-HT₁ receptor agonist and it used for the treatment of migraine headaches with or without aura. Even if the drug is well absorbed after oral administration, it has some drawbacks like first pass metabolism and decrease in bioavailability after migraine attacks. Encapsulation of drug into polymeric nanoparticles is one of the methods for protecting the drug against degradation. The present work described a preparation of Eletriptan Hydrobromide loaded poly (d,l-lactide-co-glycolide) nanoparticles prepared using o/w single emulsion solvent evaporation method. In order to determine the factors affecting the physicochemical properties of the nanoparticles on the particle size of poly (d,l-lactide-co-glycolide) nanoparticles, D-Optimal design is used. Moreover, novel, simple, sensitive, selective, and fully validated chromatographic technique for the quantification of Eletriptan Hydrobromide from Eletriptan Hydrobromide loaded poly(d,l-lactide-co-glycolide) nanoparticles was developed. Poly(d,l-lactide-co-glycolide) concentration, sonication time and sonication energy were found as significant factors (p<0.05) on particle size of nanoparticles. Limit of detection and limit of quantification values were calculated as 0.28μgmL^-1and 0.86μgmL^-1, respectively.

Engineering poly(lactic-co-glycolic acid) (PLGA) micro- and nano-carriers for Controlled Delivery of 17β-Estradiol

With menopause, circulating levels of 17β-estradiol (E2) markedly decrease. E2-based hormone therapy is prescribed to alleviate symptoms associated with menopause. E2 is also recognized for its beneficial effects in the central nervous system (CNS), such as enhanced cognitive function following abrupt hormonal loss associated with ovariectomy. For women with an intact uterus, an opposing progestogen component is required to decrease the risk of developing endometrial hyperplasia. While adding an opposing progestogen attenuates these detrimental effects on the uterus, it can attenuate the beneficial effects of E2 in the CNS. Poly(lactic-co-glycolic acid) (PLGA) micro- and nano- carriers (MNCs) have been heavily investigated for their ability to enhance the therapeutic activity of hydrophobic agents following exogenous administration, including E2. Multiple PLGA MNC formulation parameters, such as composition, molecular weight, and type of solvent used, can be altered to systematically manipulate the pharmacokinetic and pharmacodynamic profiles of encapsulated agents. Thus, there is an opportunity to enhance the therapeutic activity of E2 in the CNS through controlled delivery from PLGA MNCs. The aim of this review is to consider the fate of exogenously administered E2 and discuss how PLGA MNCs and route of administration can be used as strategies for controlled E2 delivery.

In vitro release profiles of PLGA core-shell composite particles loaded with theophylline and budesonide

We investigated the effects of drug loading location, matrix material and shell thickness on the in vitro release of combinational drugs from core-shell PLGA (i.e., poly(lactic-co-glycolic acid)) particles. Budesonide and Theophylline were selected as highly hydrophobic and hydrophilic model drugs, respectively. The dual-capillary electrospray (ES) technique, operated at the cone-jet mode, was used to produce samples of drug-loaded core-shell composite particles with selected overall sizes, polymer materials, and shell thicknesses. Theophylline and Budesonide were loaded at different locations in a PLGA composite particle. This study illustrated how the aforementioned factors affect the release rates of Budesonide and Theophylline loaded in core-shell PLGA composites. We further identified that core-shell composite particles with both model drugs loaded in the core and with matrix PLGA polymers of low molecular weights and low LA/GA ratios are the best formulation for the sustained release of highly hydrophilic and hydrophobic active pharmaceutical ingredients from PLGA composite particles. The formulation strategy obtained in this study can be in principle generalized for biopharmaceutical applications in fixed-dose combination therapy.

Smart Microparticles with a pH-responsive Macropore for Targeted Oral Drug Delivery

The development of a smart microencapsulation system programmed to actively respond to environmental pH change has long been recognized a key technology in pharmaceutical and food sciences. To this end, we developed hollow microparticles (MPs) with self-controlled macropores that respond to environmental pH change, using an Oil-in-Water emulsion technique, for oral drug delivery. We observed that freeze-drying of MPs induced closure of macropores. The closing/opening behavior of macropores was confirmed by exposing MPs encapsulating different ingredients (sulforhodamine b, fluorescent nanoparticles, and lactase) to simulated gastrointestinal (GI) fluids. MPs maintained their intact, closed pore structure in gastric pH, and subsequent exposure to intestinal pH resulted in pore opening and ingredients release. Further, MPs displayed higher protection (>15 times) than commercial lactase formulation, indicating the protective ability of the system against harsh GI conditions. This study showed development of a hybrid MP system combining the advantages of solid particles and hollow capsules, exhibiting easy solvent-free loading mechanism and smart protection/release of encapsulates through controllable macropores. Ultimately, our MPs system strives to usher a new research area in smart drug delivery systems and advance the current oral drug delivery technology by solving major challenges in targeted delivery of pH-sensitive therapeutics.

Preparation and characterization of 45S5 bioactive glass-based scaffolds loaded with PHBV microspheres with daidzein release function

Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) microsphere loaded 45S5 bioactive glass (BG) based scaffolds with drug releasing capability have been developed. PHBV microspheres with a mean particle size 4 ± 2 μm loaded with daidzein were obtained by oil-in-water single emulsion solvent evaporation method and applied to the surface of BG scaffolds by dip coating technique. The morphology, in vitro bioactivity in simulated body fluid (SBF), mechanical properties and drug release kinetics of microsphere loaded scaffolds were studied. The microspheres were shown to be homogeneously dispersed on the scaffold surfaces. It was confirmed that hydroxyapatite crystals homogeneously grew not only on the surface of the scaffold but also on the surface of the microspheres within 3 days of immersion in SBF. The daidzein release from the microsphere loaded scaffolds lasted almost 1 month and was determined to be diffusion controlled. The microsphere loaded BG scaffolds with daidzein releasing capability obtained in this study are a candidate for bone tissue engineering. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 1765-1774, 2017.

Development and characterisation of disulfiram-loaded PLGA nanoparticles for the treatment of non-small cell lung cancer

Non-Small Cell Lung Cancer (NSCLC) is the most common type of lung cancer in both men and women. A recent phase IIb study demonstrated that disulfiram (DSF) in combination with cisplatin and vinorelbine was well tolerated and prolonged the survival of patients with newly diagnosed NSCLC. However, DSF is rapidly (4min) metabolised in the bloodstream and it is this issue which is limiting its anticancer application in the clinic. We have recently demonstrated that a low dose of DSF-loaded poly(lactic-co-glycolic acid) (PLGA) nanoparticles supplemented with oral Cu inhibited tumour growth and reduced metastasis in a xenograft mouse lung cancer model. Here we demonstrate the influence of PLGA polymer, stabilizer loading and molecular weight as well as sonication time on the characteristics, including DSF release and the cytotoxicity of 10% w/w DSF-loaded PLGA nanoparticles. The paper demonstrates that the choice of PLGA as no significance on the characteristics of the nanoparticles apart from their DSF release, which is due to the differing degradation rates of the polymers. However, increasing the loading and molecular weight of the stabilizer as well as the sonication time reduced the size of the nanoparticles, reduced their ability to protect the DSF from reacting with Cu and degrading in serum, while increasing their DSF release rate and cytotoxicity. Additionally, increasing the sonication time resulted in the premature degradation of the PLGA, which increased the permeability of the nanoparticles further decreasing their ability to protect DSF from reacting with Cu and degrading in serum, while increasing their DSF release rate and cytotoxicity.

Magnesium incorporated chitosan based scaffolds for tissue engineering applications

Chitosan based porous scaffolds are of great interest in biomedical applications especially in tissue engineering because of their excellent biocompatibility in vivo, controllable degradation rate and tailorable mechanical properties. This paper presents a study of the fabrication and characterization of bioactive scaffolds made of chitosan (CS), carboxymethyl chitosan (CMC) and magnesium gluconate (MgG). Scaffolds were fabricated by subsequent freezing-induced phase separation and lyophilization of polyelectrolyte complexes of CS, CMC and MgG. The scaffolds possess uniform porosity with highly interconnected pores of 50–250 μm size range. Compressive strengths up to 400 kPa, and elastic moduli up to 5 MPa were obtained. The scaffolds were found to remain intact, retaining their original three-dimensional frameworks while testing in in-vitro conditions. These scaffolds exhibited no cytotoxicity to 3T3 fibroblast and osteoblast cells. These observations demonstrate the efficacy of this new approach to preparing scaffold materials suitable for tissue engineering applications.

•

Chitosan-magnesium-based composite scaffolds successfully synthesized.

•

Uniformly distributed 3D networks, stable in cell culture medium with pore size in the range of 50–250 μm obtained.

•

Compressive strengths up to 400 kPa and elastic moduli up to 5 MPa obtained.

•

No cytotoxicity observed with 3T3 fibroblast cells.

Enhanced Dissolution of Liquid Microdroplets in the Extensional Creeping Flow of a Hydrodynamic Trap

A novel noncontact technique based on hydrodynamic trapping is presented to study the dissolution of freely suspended liquid microdroplets into a second immiscible phase in a simple extensional creeping flow. Benzyl benzoate (BB) and n-decanol microdroplets are individually trapped at the stagnation point of a planar extensional flow, and dissolution of single microdroplets into an aqueous solution containing surfactant is characterized at different flow rates. The experimental dissolution curves are compared to two models: (i) the Epstein-Plesset (EP) model which considers only diffusive mass transfer, and (ii) the Zhang-Yang-Mao (ZYM) model which considers both diffusive and convective mass transfer in the presence of extensional creeping flow. The EP model significantly underpredicts the experimentally determined dissolution rates for all experiments. In contrast, very good agreement is observed between the experimental dissolution curves and the ZYM model when the saturation concentration of the microdroplet liquid (cs) is used as the only fitting parameter. Experiments with BB microdroplets at low surfactant concentration (10 μM) reveal cs values very similar to that reported in the literature. In contrast, experiments with BB and n-decanol microdroplets at 10 mM surfactant concentration, higher than the critical micelle concentration (CMC) of 5 mM, show further enhancements in microdroplet dissolution rates due to micellar solubilization. The presented method accurately tests the dissolution of single microdroplets into a second immiscible phase in extensional creeping flow and has potential for applications such as separation processes, food dispersion, and drug development/design.

Hollow and porous hydroxyapatite microspheres prepared with an O/W emulsion by spray freezing method

Microspheres with hollow and/or porous structures have been widely used in various applications. A new method of spraying and freezing emulsions was developed to prepare hollow HA (hydroxyapatite) microspheres with interconnected pores by using PVA (polyvinyl alcohol) as emulsifiers and binders. The relationships between viscosity and shear time or rates were tested and the dispersing stability of oil in water (O/W) emulsions was characterized with comparison to suspensions without the addition of oil phase. The effects of solid loadings of HA and the volume ratio between oil and water on the morphologies of microspheres were investigated. Hollow HA microspheres with particle diameter of ~20μm and pore size of ~0.6μm were successfully obtained by spray freezing method. Besides, drying and sintering processes were crucial to the formation of hollow and porous structures, respectively. The gentamicin loading and releasing of HA porous microspheres with different hollow volumes were tested.

Fabrication of uniform-sized poly-ɛ-caprolactone microspheres and their applications in human embryonic stem cell culture

The generation of liquefied poly-ɛ-caprolactone (PCL) droplets by means of a microfluidic device results in uniform-sized microspheres, which are validated as microcarriers for human embryonic stem cell culture. Formed droplet size and size distribution, as well as the resulting PCL microsphere size, are correlated with the viscosity and flow rate ratio of the dispersed (Q d) and continuous (Q c) phases. PCL in dichloromethane increases its viscosity with concentration and molecular weight. Higher viscosity and Q d/Q c lead to the formation of larger droplets, within two observed formation modes: dripping and jetting. At low viscosity of dispersed phase and Q d/Q c, the microfluidic device is operated in dripping mode, which generates droplets and microspheres with greater size uniformity. Solutions with lower molecular weight PCL have lower viscosity, resulting in a wider concentration range for the dripping mode. When coated with extracellular matrix (ECM) proteins, the fabricated PCL microspheres are demonstrated capable of supporting the expansion of human embryonic stem cells.

Formulation and evaluation of controlled release ethylcellulose and polyethylene glycol microspheres containing metoprolol tartrate

Metoprolol tartrate is rapidly absorbed from both gastric and intestinal regions, after oral administration. To retard the release rate of the metoprolol tartrate, microspheres were prepared with varying concentrations of a mixture containing ethylcellulose and polyethylene glycol-6000. The prepared microspheres were evaluated for various physicochemical characteristics and in vitro drug release. The percent yield of microspheres was in the range of 75.2-87.3%. The particle size of microspheres was found to be in the range of 73.2-85.5 μm. Fourier transform-infrared spectral analysis and differential scanning calorimetry concluded the absence of any interaction between the drug and the carriers. The release time profile of metoprolol tartrate from microspheres in 0.1 N hydrochloric acid solution was to the extent of 33.4-60.2%. The complete release of metoprolol tartrate occurred from MPT-3 and MPT-4 in phosphate buffer solution (pH 7.4) within 8 and 7 h, respectively, whereas the incomplete release (72.3%) occurred from MPT-1. Nearly, the complete release (98.5%) of metoprolol occurred from MPT-2 in 10 h. Formulation MPT-2 would be a preferred formulation. The release of metoprolol involves diffusion rate limited (R² = 0.9865) as a mechanism from drug release. The prepared microspheres of metoprolol tartrate eliminate the need for multiple dosing and provide patient compliance.

Ethyl cellulose nanoparticles as a platform to decrease ulcerogenic potential of piroxicam: formulation and in vitro/in vivo evaluation

Nanoparticles (NPs) have long gained significant interest for their use in various drug formulations in order to increase bioavailability, prolong drug release, and decrease side effects of highly toxic drugs. The objective of this investigation was to evaluate the potential of ethyl cellulose-based NPs (EC-NPs) to modulate the release and reduce ulcerogenicity of piroxicam (PX) after oral administration. PX-loaded EC-NPs were prepared by solvent evaporation technique using different stabilizers at three concentration levels. Morphological examination of selected formulas confirmed the formation of spherical NPs with slightly porous surface. Formulation containing poloxamer-stabilized EC-NPs (P188/0.2), having a particle size of 240.26±29.24 nm, polydispersity index of 0.562±0.030, entrapment efficiency of 85.29%±1.57%, and modulated release of PX (88% after 12 hours), was selected as the optimum formulation. Differential scanning calorimetry demonstrated the presence of PX in an amorphous form in the NPs. Fourier-transform infrared spectroscopy revealed the possible formation of hydrogen bond and the absence of chemical interaction. In vivo study, evaluation of pharmacokinetic parameters, evaluation of gastric irritation potential, and histological examination were conducted after administration of the selected formulation. Time to reach maximum plasma concentration, t_max, of poloxamer-stabilized EC-NPs was significantly higher than that of Feldene^® 20 mg capsules (P≤0.001). Encapsulation of the acidic, gastric offender PX into NPs managed to significantly suppress gastric ulceration potential in rats (P≤0.05) as compared to that of PX suspension. A reduction of 66% in mean ulcer index was observed. In conclusion, poloxamer-stabilized EC-NPs (P188/0.2) had a significant potential of offsetting deleterious side effects common in PX use.

The preparation and characterization of PLG nanoparticles with an entrapped synthetic TLR7 agonist and their preclinical evaluation as adjuvant for an adsorbed DTaP vaccine

The design of safe and potent adjuvants able to enhance and modulate antigen-specific immunity is of great interest for vaccine research and development. In the present study, negatively charged poly(lactide-co-glycolide) (PLG) nanoparticles have been combined with a synthetic immunepotentiator molecule targeting the Toll-like receptor 7. The selection of appropriate preparation and freeze-drying conditions resulted in a PLG-based adjuvant with well-defined and stable physico-chemical properties. The adjuvanticity of such nanosystem has later been evaluated in the mouse model with a diphtheria-tetanus-pertussis (DTaP) vaccine, on the basis of the current need to improve the efficacy of acellular pertussis (aP) vaccines. DTaP antigens were adsorbed onto PLG nanoparticles surface, allowing the co-delivery of TLR7a and multiple antigens through a single formulation. The entrapment of TLR7a into PLG nanoparticles resulted in enhanced IgG and IgG2a antibody titers. Notably, the immune potentiator effect of TLR7a was less evident when it was used in not-entrapped form, indicating that co-localization of TLR7a and antigens is required to adequately stimulate immune responses. In conclusion, the rational selection of adjuvants and formulation here described resulted as a highly valuable approach to potentiate and better tailor DTaP vaccine immunogenicity.