Electrochemical Sensor for Detecting Ultratrace Nitroaromatic Compounds Using Mesoporous SiO2-Modified Electrode

Voltammetric detection of nitroaromatic compounds using carbon-nanomaterials-based electrodes

The morphology of glassy carbon surfaces was investigated by the atomic force microscope (AFM) method. Multi-wall carbon nanotubes (MWCNTs) were purified and investigated with a scanning electron microscope (SEM) and a transmission electron microscope (TEM). An electrochemical technique based on the glassy carbon electrode (GCE) or MWCNT-modified GCEs was used for the detection of nitroaromatic compounds (NACs), namely 2,4,6-trinitrotoluene (TNT), 1,3,5-trinitrobenzene (TNB), 2,4-dinitrotoluene (2,4-DNT), and 1,3-dinitrobenzene (1,3-DNB). MWCNT-modified GCEs were more sensitive than GCEs to TNB, 2,4-DNT, and 1,3-DNB, with the detection limit down to ppb level, whereas the modified GCEs showed lower sensitivity to TNT. In varying degrees, the accumulation of nitro compounds can be promoted by MWCNT-modified GCEs in the detection process, a property which can be attributed to the large surface area and graphene-sheet structure of MWCNTs.

Using of multi-walled carbon nanotubes electrode for adsorptive stripping voltammetric determination of ultratrace levels of RDX explosive in the environmental samples

A study of the electrochemical behavior and determination of RDX, a high explosive, is described on a multi-walled carbon nanotubes (MWCNTs) modified glassy carbon electrode (GCE) using adsorptive stripping voltammetry and electrochemical impedance spectroscopy (EIS) techniques. The results indicated that MWCNTs electrode remarkably enhances the sensitivity of the voltammetric method and provides measurements of this explosive down to the sub-mg/l level in a wide pH range. The operational parameters were optimized and a sensitive, simple and time-saving cyclic voltammetric procedure was developed for the analysis of RDX in ground and tap water samples. Under optimized conditions, the reduction peak have two linear dynamic ranges of 0.6-20.0 and 8.0-200.0 mM with a detection limit of 25.0 nM and a precision of <4% (RSD for 8 analysis).

A hybrid nanosensor for TNT vapor detection

Real-time detection of trace chemicals, such as explosives, in a complex environment containing various interferents has been a difficult challenge. We describe here a hybrid nanosensor based on the electrochemical reduction of TNT and the interaction of the reduction products with conducting polymer nanojunctions in an ionic liquid. The sensor simultaneously measures the electrochemical current from the reduction of TNT and the conductance change of the polymer nanojunction caused from the reduction product. The hybrid detection mechanism, together with the unique selective preconcentration capability of the ionic liquid, provides a selective, fast, and sensitive detection of TNT. The sensor, in its current form, is capable of detecting parts-per-trillion level TNT in the presence of various interferents within a few minutes.

Sensitive electrochemical immunoassay for 2,4,6-trinitrotoluene based on functionalized silica nanoparticle labels

We present a poly(guanine)-functionalized silica nanoparticle (NP) label-based electrochemical immunoassay for sensitively detecting 2,4,6-trinitrotoluene (TNT). This immunoassay takes advantage of magnetic bead-based platform for competitive displacement immunoreactions and separation, and use electroactive nanoparticles as labels for signal amplification. For this assay, anti-TNT-coated magnetic beads interacted with TNT analog-conjugated poly(guanine)-silica NPs and formed analog-anti-TNT immunocomplexes on magnetic beads. The immunocomplexes coated magnetic beads were exposed to TNT samples, which resulted in displacing the analog conjugated poly(guanine) silica NPs into solution by TNT. In contrast, there are no guanine residues releasing into the solution in the absence of TNT. The reaction solution was then separated from the magnetic beads and transferred to the electrode surface for electrochemical measurements of guanine oxidation with Ru(bpy)3(2+) as mediator. The sensitivity of this TNT assay was greatly enhanced through dual signal amplifications: (1) a large amount of guanine residues on silica nanoparticles are introduced into the test solution by displacement immunoreactions and (2) a Ru(bpy)3(2+)-induced guanine catalytic oxidation further enhances the electrochemical signal. Some experimental parameters for the nanoparticle label-based electrochemical immunoassay were studied and the performance of this assay was evaluated. The method is found to be very sensitive and the detection limit of this assay is approximately 0.1 ng mL(-1) TNT. The electrochemical immunoassay based on the poly[guanine]-functionalized silica NP label offers a new approach for sensitive detection of explosives.

Selective detection of gas-phase TNT by integrated optical waveguide spectrometry using molecularly imprinted sol–gel sensing films

A chemical sensor was developed to detect the explosive 2,4,6-trinitrotoluene (TNT) utilizing planar integrated optical waveguide (IOW) attenuated total reflection spectrometry. Submicron thick films of organically modified sol-gel polymers were deposited on the waveguide surface as the sensing layer. Sol-gels were molecularly imprinted for TNT using covalently bound template molecules linked to the matrix through 1 or 2 carbamate linkages. Upon chemical cleavage of the template and displacement of the TNT-like pendant groups from the matrix, shape-selective binding sites were created that possess a primary amine group. The amine was used to deprotonate bound TNT yielding an anionic form that absorbs visible light. Binding of TNT and subsequent conversion to the anion results in the attenuation of light propagating through the waveguide, thus creating a spectrophotometric device. Sensitivity can be achieved by taking advantage of the substantial pathlength provided by the use of single mode IOWs. The limit-of-detection to gas-phase TNT was found to be five parts-per-billion (ppbV) in ambient air at a flow rate of 40 mL min(-1) given a 60 s sampling time. The sensor is highly selective for TNT due to the selectivity of binding site recognition of TNT and the subsequent generation of the TNT anion. Response to TNT is not reversible which results in an integrating sensor device which, in theory, can improve the ability to detect small amounts of the explosive if the exposure time is sufficient in length.

Effect of Polycyclic Aromatic Hydrocarbons on Detection Sensitivity of Ultratrace Nitroaromatic Compounds

Polycyclic aromatic hydrocarbons (PAHs) with different numbers of pi-electrons and geometric symmetry of pi-systems, including anthracene, phenanthrene, pyrene, triphenylene, perylene, benzo[ghi]perylene, and coronene, were chosen to modify glassy carbon electrodes (GCEs) by self-assembling. The self-assembled monolayer of PAHs was investigated by STM and was used in the electrochemical detection of nitroaromatic compounds (NACs). The results indicate that PAH-modified GCE shows higher sensitivity to NACs than an unmodified one. Among the seven different PAHs, coronene-modified GCE exhibits the highest sensitivity to 2,4,6-trinitrotoluene and 1,3,5-trinitrobenzene.

Functionalized carbon nanotubes as sensitive materials for electrochemical detection of ultra-trace 2,4,6-trinitrotoluene

This report demonstrates a novel electrochemical method for fast and sensitive detection of ultra-trace 2,4,6-trinitrotoluene (TNT) based on modified electrodes by functionalized MWCNTs. To fabricate new kind of functionalized MWCNTs material sensitive to TNT, our work first theoretically investigated the interaction between triphenylene (TP) and TNT by calculating their electrostatic potentials, and secondly characterized this interaction by the fluorescence spectra. The functionalized MWCNTs of TP-MWCNTs were thoroughly characterized by fluorescence and UV-visible spectra, and by analysing these results, the interaction between TP and MWCNTs was also examined. Electrochemical experiment suggests, compared to MWCNTs- and TP- modified electrodes, TP-MWCNTs-modified electrodes result in both fast response and enhanced sensitivity to TNT detection. These results show the attachment of TP on MWCNTs leads to better sensing unit with more receptor site to TNT, associated with the coordinative recognition of TP and MWCNTs to TNT, finally result in the improvement of response and sensitivity. And this improved recognition process is attributed to the geometric and electrostatic complementarity between TP and TNT. The present study demonstrates TP-MWCNTs-modified electrode holds promising and important implications for the detection of ultra-trace TNT.