Multiple Label-Free Detection of Antigen−Antibody Reaction Using Localized Surface Plasmon Resonance-Based Core−Shell Structured Nanoparticle Layer Nanochip

Nanostructure shape effects on response of plasmonic aptamer sensors

A localized surface plasmon resonance (LSPR) sensor surface was fabricated by the deposition of gold nanorods on a glass substrate and subsequent immobilization of the DNA aptamer, which specifically bind to thrombin. This LSPR aptamer sensor showed a response of 6-nm λ(max) shift for protein binding with the detection limit of at least 10 pM, indicating one of the highest sensitivities achieved for thrombin detection by optical extinction LSPR. We also tested the LSPR sensor fabricated using gold bipyramid, which showed higher refractive index sensitivity than the gold nanorods, but the overall response of gold bipyramid sensor appears to be 25% less than that of the gold nanorod substrate, despite the approximately twofold higher refractive index sensitivity. XPS analysis showed that this is due to the low surface density of aptamers on the gold bipyramid compared with gold nanorods. The low surface density of the aptamers on the gold bipyramid surface may be due to the effect of shape of the nanostructure on the kinetics of aptamer monolayer formation. The small size of aptamers relative to other bioreceptors is the key to achieving high sensitivity by biosensors on the basis of LSPR, demonstrated here for protein binding. The generality of aptamer sensors for protein detection using gold nanorod and gold nanobipyramid substrates is anticipated to have a large impact in the important development of sensors toward biomarkers, environmental toxins, and warfare agents.

Electrical modulation of fano resonance in plasmonic nanostructures using graphene

Pauli blocking of interband transistions gives rise to tunable optical properties in single layer graphene (SLG). This effect is exploited in a graphene-nanoantenna hybrid device where Fano resonant plasmonic nanostructures are fabricated on top of a graphene sheet. The use of Fano resonant elements enhances the interaction of incident radiation with the graphene sheet and enables efficient electrical modulation of the plasmonic resonance. We observe electrically controlled damping in the Fano resonances occurring at approximately 2 μm, and the results are verified by full-wave 3D finite-element simulations. Our approach can be used for development of next generation of tunable plasmonic and hybrid nanophotonic devices.

Hydrogen peroxide (H₂O₂) detection with nanoprobes for biological applications: a mini-review

Hydrogen peroxide (H2O2) is an important member of the reactive oxygen species, playing various roles in biology and medicine. The conventional detection methods for H2O2 are often restricted by their limited sensitivity, poor selectivity towards H2O2, inappropriate physicochemical properties for detection in biological environments, long response time, etc. We briefly review here some recent nanotechnology--based approaches for H2O2 detection, which present an effective improvement, overcoming some of the limitations of the conventional H2O2 sensing techniques.

Plasmonic interferometric sensor arrays for high-performance label-free biomolecular detection

A plasmonic interferometric biosensor that consists of arrays of circular aperture-groove nanostructures patterned on a gold film for phase-sensitive biomolecular detection is demonstrated. The phase and amplitude of interfering surface plasmon polaritons (SPPs) in the proposed device can be effectively engineered by structural tuning, providing flexible and efficient control over the plasmon line shape observed through SPP interference. Spectral fringes with high contrast, narrow linewidth, and large amplitude have been experimentally measured and permit the sensitive detection of protein surface coverage as low as 0.4 pg mm(-2). This sensor resolution compares favorably with commercial prism-based surface plasmon resonance systems (0.1 pg mm(-2)) but is achieved here using a significantly simpler collinear transmission geometry, a miniaturized sensor footprint, and a low-cost compact spectrometer. Furthermore, we also demonstrate superior sensor performance using the intensity interrogation method, which can be combined with CCD imaging to upscale our platform to high-throughput array sensing. A novel low-background interferometric sensing scheme yields a high sensing figure of merit (FOM*) of 146 in the visible region, surpassing that of previous plasmonic biosensors and facilitating ultrasensitive high-throughput detection.

Optimization of gold nanoring arrays for biosensing in the fiber-optic communication window

To improve the limit of detection in a nanoplasmonic sensor system, the optical performance of the metal nanostructures should be optimized according to the best spectral window of the measurement instrument. We propose that the spectral window from 1460 to 1610 nm can potentially provide ultrahigh instrumental resolution for biosensing. We optimized gold nanoring arrays such that the extinction peak position is inside the proposed window, the extinction peak is sharp enough to track the peak shift with high resolution and the figure of merit (sensitivity/linewidth) of the array is optimized at the same time. The peak-sharpening effect of the array caused by coherent interaction plays a central role in the optimization. The optimized array has a lattice constant in the range [1000 nm,1060 nm], a bulk index sensitivity of around 450 nm/RIU and a figure of merit larger than 4. It is an enabling sensor element for a near-infrared sensor chip with ultrahigh resolution.

Trends and challenges of refractometric nanoplasmonic biosensors: a review

Motivated by potential benefits such as sensor miniaturization, multiplexing opportunities and higher sensitivities, refractometric nanoplasmonic biosensing has profiled itself in a short time span as an interesting alternative to conventional Surface Plasmon Resonance (SPR) biosensors. This latter conventional sensing concept has been subjected during the last decades to strong commercialization, thereby strongly leaning on well-developed thin-film surface chemistry protocols. Not surprisingly, the examples found in literature based on this sensing concept are generally characterized by extensive analytical studies of relevant clinical and diagnostic problems. In contrast, the more novel Localized Surface Plasmon Resonance (LSPR) alternative finds itself in a much earlier, and especially, more fundamental stage of development. Driven by new fabrication methodologies to create nanostructured substrates, published work typically focuses on the novelty of the presented material, its optical properties and its use - generally limited to a proof-of-concept - as a label-free biosensing scheme. Given the different stages of development both SPR and LSPR sensors find themselves in, it becomes apparent that providing a comparative analysis of both concepts is not a trivial task. Nevertheless, in this review we make an effort to provide an overview that illustrates the progress booked in both fields during the last five years. First, we discuss the most relevant advances in SPR biosensing, including interesting analytical applications, together with different strategies that assure improvements in performance, throughput and/or integration. Subsequently, the remaining part of this work focuses on the use of nanoplasmonic sensors for real label-free biosensing applications. First, we discuss the motivation that serves as a driving force behind this research topic, together with a brief summary that comprises the main fabrication methodologies used in this field. Next, the sensing performance of LSPR sensors is examined by analyzing different parameters that can be invoked in order to quantitatively assess their overall sensing performance. Two aspects are highlighted that turn out to be especially important when trying to maximize their sensing performance, being (1) the targeted functionalization of the electromagnetic hotspots of the nanostructures, and (2) overcoming inherent negative influence that stem from the presence of a high refractive index substrate that supports the nanostructures. Next, although few in numbers, an overview is given of the most exhaustive and diagnostically relevant LSPR sensing assays that have been recently reported in literature, followed by examples that exploit inherent LSPR characteristics in order to create highly integrated and high-throughput optical biosensors. Finally, we discuss a series of considerations that, in our opinion, should be addressed in order to bring the realization of a stand-alone LSPR biosensor with competitive levels of sensitivity, robustness and integration (when compared to a conventional SPR sensor) much closer to reality.

Multi-resonant plasmonic nanodome arrays for label-free biosensing applications

The characteristics and utility of plasmonic nanodome arrays capable of supporting multiple resonance modes are described. A low-cost, large-area replica molding process is used to produce, on flexible plastic substrates, two-dimensional periodic arrays of cylinders that are subsequently coated with SiO2 and Ag thin films to form dome-shaped structures, with 14 nm spacing between the features, in a precise and reproducible fashion. Three distinct optical resonance modes, a grating diffraction mode and two localized surface plasmon resonance (LSPR) modes, are observed experimentally and confirmed by finite-difference-time-domain (FDTD) modeling which is used to calculate the electromagnetic field distribution of each resonance around the nanodome array structure. Each optical mode is characterized by measuring sensitivity to bulk refractive index changes and to surface effects, which are examined using stacked polyelectrolyte layers. The utility of the plasmonic nanodome array as a functional interface for biosensing applications is demonstrated by performing a bioassay to measure the binding affinity constant between protein A and human immunoglobulin G (IgG) as a model system. The nanoreplica molding process presented in this work allows for simple, inexpensive, high-throughput fabrication of nanoscale plasmonic structures over a large surface area (120 × 120 mm(2)) without the requirement for high resolution lithography or additional processes such as etching or liftoff. The availability of multiple resonant modes, each with different optical properties, allows the nanodome array surface to address a wide range of biosensing problems with various target analytes of different sizes and configurations.

Defect-assisted plasmonic crystal sensor

We demonstrate enhanced sensitivity of a nanostructured plasmonic sensor that utilizes resonance in intentional structural defects within a plasmonic crystal. The measured sensitivity of the fabricated nanosensor is ~500 nm/RIU showing improvement over traditional nanohole array sensors. Furthermore, the defects provide an additional design parameter to increase sensitivity by engineering plasmon lifetime.

Spatially selective Au nanoparticle growth in laser-quality glass controlled by UV-induced phosphate-chain cross-linkage

Herein we describe how UV excitation of localized electronic states in phosphate glasses can activate structural rearrangements that influence the kinetics of Au nanoparticle (NP) thermal growth in Au-doped glass. The results suggest a novel strategy to address the problem of controlling nano-assembly processes of metal NP patterns in fully inorganic and chemically stable hard materials, such as laser-quality glasses. We show that the mechanism is promoted by opening and subsequent cross-linkage of phosphate chains under UV excitation of non-bridging groups in the amorphous network of the glass, with a consequent modification of Au diffusion and metal NP growth. Importantly, the micro-Raman mapping of the UV-induced modifications demonstrates that the process is restricted within the beam waist region of the focused UV laser beam. This fact is consistent with the need for more than one excitation event, close in time and in space, in order to promote structural cross-linkage and Au diffusion confinement. The stability of the photo-induced modifications makes it possible to design new metal patterning approaches for the fabrication of three-dimensional metal structures in laser-quality materials for high-power nonlinear applications.

Localized surface plasmon resonance detection of biological toxins using cell surface oligosaccharides on glyco chips

We have detected biological toxins using localized surface plasmon resonance (LSPR) and synthetic glycosyl ceramides (β-lactoside, globosyl trisaccharide (Gb3), or GM1 pentasaccharide) attached to gold (Au) nanoparticles. The particle diameters ranged from 5-100 nm. The detection sensitivity for three toxins (ricin, Shiga toxin, and cholera toxin) was found to depend not only on the attached glycoside but also on the diameter of the Au nanoparticles. For the detection of ricin, the 20-nm β-lactoside-coated Au nanoparticle exhibited the highest LSPR response, whereas 40-nm Gb3- and GM1-coated Au nanoparticles gave the best results for Shiga toxin and cholera toxin, respectively. In addition, a blocking process on the nanoparticle surface greatly improved the detection sensitivity for cholera toxin. The LSPR system enabled us to detect ricin at 30 ng/mL, Shiga toxin at 10 ng/mL, and the cholera toxin at 20 ng/mL.

Microfluidic chips for immunoassays

The use of microfluidic chips for immunoassays has been extensively explored in recent years. The combination of immunoassays and microfluidics affords a promising platform for multiple, sensitive, and automatic point-of-care (POC) diagnostics. In this review, we focus on the description of recent achievements in microfluidic chips for immunoassays categorized by their detection method. Following a brief introduction to the basic principles of each detection method, we examine current microfluidic immunosensor detection systems in detail. We also highlight interesting strategies for sensitive immunosensing configurations, multiplexed analysis, and POC diagnostics in microfluidic immunosensors.

Multiplexed sensing and imaging with colloidal nano- and microparticles

Sensing and imaging with fluorescent, plasmonic, and magnetic colloidal nano- and microparticles have improved during the past decade. In this review, we describe the concepts and applications of how these techniques can be used in the multiplexed mode, that is, sensing of several analytes in parallel or imaging of several labels in parallel.

Promises and Challenges of Nanoplasmonic Devices for Refractometric Biosensing

Optical biosensors based on surface plasmon resonance (SPR) in metallic thin films are currently standard tools for measuring molecular binding kinetics and affinities - an important task for biophysical studies and pharmaceutical development. Motivated by recent progress in the design and fabrication of metallic nanostructures, such as nanoparticles or nanoholes of various shapes, researchers have been pursuing a new generation of biosensors harnessing tailored plasmonic effects in these engineered nanostructures. Nanoplasmonic devices, while demanding nanofabrication, offer tunability with respect to sensor dimension and physical properties, thereby enabling novel biological interfacing opportunities and extreme miniaturization. Here we provide an integrated overview of refractometric biosensing with nanoplasmonic devices and highlight some recent examples of nanoplasmonic sensors capable of unique functions that are difficult to accomplish with conventional SPR. For example, since the local field strength and spatial distribution can be readily tuned by varying the shape and arrangement of nanostructures, biomolecular interactions can be controlled to occur in regions of high field strength. This may improve signal-to-noise and also enable sensing a small number of molecules. Furthermore, the nanoscale plasmonic sensor elements may, in combination with nanofabrication and materials-selective surface-modifications, make it possible to merge affinity biosensing with nanofluidic liquid handling.

Electrically induced conformational change of peptides on metallic nanosurfaces

Surface immobilized biomolecular probes are used in many areas of biomedical research, such as genomics, proteomics, immunology, and pathology. Although the structural conformations of small DNA and peptide molecules in free solution are well studied both theoretically and experimentally, the conformation of small biomolecules bound on surfaces, especially under the influence of external electric fields, is poorly understood. Using a combination of molecular dynamics simulation and surface-enhanced Raman spectroscopy, we study the external electric field-induced conformational change of dodecapeptide probes tethered to a nanostructured metallic surface. Surface-tethered peptides with and without phosphorylated tyrosine residues are compared to show that peptide conformational change under electric field is sensitive to biochemical modification. Our study proposes a highly sensitive in vitro nanoscale electro-optical detection and manipulation method for biomolecule conformation and charge at bio-nano interfaces.

Multiple resonance fiber-optic sensor with time division multiplexing for multianalyte detection

A proof-of-concept multiwindow fiber-optic sensor utilizing multiple particle plasmon resonance (PPR) of silver nanoparticles and gold nanorods separately on two unclad portions of the fiber for multianalyte detection is demonstrated. The detection is based on intensity interrogation of multiple wavelengths by a single detector. Time division multiplexing is employed to modulate the illumination of dual-wavelength LEDs to induce PPRs for simultaneous real-time and label-free monitoring of two types of biomolecular interactions. Preliminary results reveal that a refractive index resolution of 9 ×10(-6) RIU is achieved. Moreover, the measured intensities of two windows independently respond to their respective binding events. The potential of the sensor architecture with multiple sensing windows for cascaded, higher throughput, and multianalyte biochemical detection can be expected.

Current analytical strategies for C-reactive protein quantification in blood

The measurement of serum C-reactive protein (CRP) levels has been given particular interest as a marker of inflammation associated with cardiovascular diseases. CRP belongs to the pentraxin family of proteins and the routine clinical analysis of CRP in blood samples is used as an important factor in primary prevention programmes together with causative and predisposing factors. This review focuses on the most representative methodologies and strategies for CRP detection and quantification that have been recently proposed, as well as reviewing those that are currently being developed for the specific, sensitive, inexpensive and high-throughput blood analysis of this protein.

Rapid protein concentration, efficient fluorescence labeling and purification on a micro/nanofluidics chip

Fluorescence analysis has proved to be a powerful detection technique for achieving single molecule analysis. However, it usually requires the labeling of targets with bright fluorescent tags since most chemicals and biomolecules lack fluorescence. Conventional fluorescence labeling methods require a considerable quantity of biomolecule samples, long reaction times and extensive chromatographic purification procedures. Herein, a micro/nanofluidics device integrating a nanochannel in a microfluidics chip has been designed and fabricated, which achieves rapid protein concentration, fluorescence labeling, and efficient purification of product in a miniaturized and continuous manner. As a demonstration, labeling of the proteins bovine serum albumin (BSA) and IgG with fluorescein isothiocyanate (FITC) is presented. Compared to conventional methods, the present micro/nanofluidics device performs about 10(4)-10(6) times faster BSA labeling with 1.6 times higher yields due to the efficient nanoconfinement effect, improved mass, and heat transfer in the chip device. The results demonstrate that the present micro/nanofluidics device promises rapid and facile fluorescence labeling of small amount of reagents such as proteins, nucleic acids and other biomolecules with high efficiency.

Lab-in-a-tube: ultracompact components for on-chip capture and detection of individual micro-/nanoorganisms

A review of present and future on-chip rolled-up devices, which can be used to develop lab-in-a-tube total analysis systems, is presented. Lab-in-a-tube is the integration of numerous rolled-up components into a single device constituting a microsystem of hundreds/thousands of independent units on a chip, each individually capable of sorting, detecting and analyzing singular organisms. Such a system allows for a scale-down of biosensing systems, while at the same time increasing the data collection through a large, smart array of individual biosensors. A close look at these ultracompact components which have been developed over the past decade is given. Methods for the capture of biomaterial are laid out and progress of cell culturing in three-dimensional scaffolding is detailed. Rolled-up optical sensors based on photoluminescence, optomechanics, optofluidics and metamaterials are presented. Magnetic sensors are introduced as well as electrical components including heating, energy storage and resistor devices.

Real-time sensing and discrimination of single chemicals using the channel of phi29 DNA packaging nanomotor

A highly sensitive and reliable method to sense and identify a single chemical at extremely low concentrations and high contamination is important for environmental surveillance, homeland security, athlete drug monitoring, toxin/drug screening, and earlier disease diagnosis. This article reports a method for precise detection of single chemicals. The hub of the bacteriophage phi29 DNA packaging motor is a connector consisting of 12 protein subunits encircled into a 3.6 nm channel as a path for dsDNA to enter during packaging and to exit during infection. The connector has previously been inserted into a lipid bilayer to serve as a membrane-embedded channel. Herein we report the modification of the phi29 channel to develop a class of sensors to detect single chemicals. The lysine-234 of each protein subunit was mutated to cysteine, generating 12-SH ring lining the channel wall. Chemicals passing through this robust channel and interactions with the SH group generated extremely reliable, precise, and sensitive current signatures as revealed by single channel conductance assays. Ethane (57 Da), thymine (167 Da), and benzene (105 Da) with reactive thioester moieties were clearly discriminated upon interaction with the available set of cysteine residues. The covalent attachment of each analyte induced discrete stepwise blockage in current signature with a corresponding decrease in conductance due to the physical blocking of the channel. Transient binding of the chemicals also produced characteristic fingerprints that were deduced from the unique blockage amplitude and pattern of the signals. This study shows that the phi29 connector can be used to sense chemicals with reactive thioesters or maleimide using single channel conduction assays based on their distinct fingerprints. The results demonstrated that this channel system could be further developed into very sensitive sensing devices.

Gold nanoparticles functionalized with peptides for specific affinity aggregation assays of estrogen receptors and their agonists

Nuclear receptors regulate the transcription of genes and various functions such as development, differentiation, homeostasis, and behavior by formation of complexes with ligand and co-activator. Recent findings have shown that agonists of a ligand may have a toxic effect on cellular/tissular function through improper activation of nuclear receptors. In this study, a simple assay system of hetero-complexes of three different molecules (estrogen receptor, ligand, and co-activator peptide) has been developed. This assay system employs functionalized gold nanoparticles (GNPs: 15 nm in diameter). The surfaces of the GNPs were modified by a 12- or 20-amino-acid peptide that contains the sequence of co-activator for activating nuclear receptor by an agonist ligand. Owing to the affinity of the peptide, the functionalized GNPs aggregate faster when the nuclear receptor and the agonist ligand are also present. The aggregation of GNPs can be identified by shifts in adsorption spectrum, which give information about the specificity of agonist ligands. Similarly, this spectrum shift can measure concentration of known agonist ligand. This simple agonist screening will be employed as high through-put analysis (HTA) in the discovery of drugs that act through nuclear receptors.

High-sensitivity nanosensors for biomarker detection

High sensitivity nanosensors utilize optical, mechanical, electrical, and magnetic relaxation properties to push detection limits of biomarkers below previously possible concentrations. The unique properties of nanomaterials and nanotechnology are exploited to design biomarker diagnostics. High-sensitivity recognition is achieved by signal and target amplification along with thorough pre-processing of samples. In this tutorial review, we introduce the type of detection signals read by nanosensors to detect extremely small concentrations of biomarkers and provide distinctive examples of high-sensitivity sensors. The use of such high-sensitivity nanosensors can offer earlier detection of disease than currently available to patients and create significant improvements in clinical outcomes.

Influence of particle size on the binding activity of proteins adsorbed onto gold nanoparticles

We used optical extinction spectroscopy to study the structure of proteins adsorbed onto gold nanoparticles of sizes 5-60 nm and their resulting biological binding activity. For these studies, proteins differing in size and shape, with well-characterized and specific interactions-rabbit immunoglobulin G (IgG), goat anti-rabbit IgG (anti-IgG), Staphylococcal protein A, streptavidin, and biotin-were used as model systems. Protein interaction with gold nanoparticles was probed by optical extinction measurements of localized surface plasmon resonance (LSPR) of the gold nanoparticles. Binding of the ligands in solution to protein molecules already immobilized on the surface of gold causes a small but detectable shift in the LSPR peak of the gold nanoparticles. This shift can be used to probe the binding activity of the adsorbed protein. Within the context of Mie theory calculations, the thickness of the adsorbed protein layer as well as its apparent refractive index is shown to depend on the size of the gold nanoparticle. The results suggest that proteins can adopt different orientations that depend on the size of the gold nanospheres. These different orientations, in turn, can result in different levels of biological activity. For example, we find that IgG adsorbed on spheres with diameter ≥20 nm does not bind to protein A. This study illustrates the principle that the size of nanoparticles can strongly influence the binding activity of adsorbed proteins. In addition to the importance of this in cases of direct exposure of proteins to nanoparticles, the results have implications for proteins adsorbed to materials with nanometer scale surface roughness.

Study of optical phase transduction on localized surface plasmon resonance for ultrasensitive detection

Localized surface plasmon resonance (LSPR) has shown its remarkable applications in biosensing, bioimaging, and nanophotonics. Unlike surface plasmon polariton (SPP), the current studies regarding LSPR as biosensor were restricted in probing the extinction spectra, and thus limit the performance in biosensing and bioimaging. Here, we reveal that optical phase of LSPR provides an acute change at resonance beyond extinction spectra, which permits an ultra-high sensitivity in phase interrogation. We found that optical phases of LSPR show two orders of magnitude higher sensing resolution than extinction spectra among the same nanostructures. For the first time, we demonstrated the feasibility of probing optical phase transduction in LSPR for biosensing, and the sensitivity is superior to not only the extinction spectra among the same metallic nanostructures, but also the LSPR sensors among the current literatures. In summary, the exploitation of LSPR by phase interrogation essentially complements the sensitivity insufficiency of LSPR, and provides new access to understanding and using the rich physics of LSPR.

Development of label-free optical diagnosis for sensitive detection of influenza virus with genetically engineered fusion protein

An active immobilization method utilizing the metal-binding property was developed and examined for its ability to facilitate the biosensing of avian influenza virus. The special biosensing performance with optical plasmonic analysis, including surface plasmon resonance (SPR) was evaluated on gold substrate and also by SPR imaging (SPRi) and localized SPR (LSPR) system where antigen-antibody interaction occurs. A complete optical analytical system was developed by integrating microarray and fabricating nanoparticles onto a single glass chip, thus allowing specific and sensitive diagnosis with subsequent binding. Reaction condition for the maximum reactivity was optimized by SPR analysis and more sensitive interaction was performed by SPRi analysis. Furthermore, ultra-sensitive detection was successfully developed up to the target molecules of 1 pg mL(-1) by LSPR analysis. The advanced phase-in of enhanced plasmonic sensing system allows more efficient and sensitive detection by switching fabrication processes, which were prepared on the gold surface using the nanoparticles. This inflow contains the gold binding polypeptide (GBP)-fusion protein, which was expressed in recombinant Escherichia coli cells, was bound onto the gold substrates by means of specific interaction. The GBP-fusion method allows immobilization of proteins in bioactive forms onto the gold surface without surface modification suitable for studying antigen-antibody interaction. It was used for the detection of influenza virus, an infectious viral disease, as an example case.

Synthesis and bioanalytical applications of specific-shaped metallic nanostructures: a review

Many successful synthesis routes for producing different shapes of metallic nanostructures, including sphere, rod, cube, and hollow shapes, have been developed in the past few decades. Many applications using these nanostructures have been studied because the outstanding properties of the nanostructures are not exhibited by their bulk-state counterparts. This review paper reports some recent developments in clinical and biosensor applications. The first part focused on the synthesis methods of metallic nanostructures having various shapes along with their optical properties. The second and third part is an introduction of the gold nanoparticle assemblies and arrays, explaining the conjugation methods of metallic nanostructures with biological entities. The final part reviews on the recent bioanalytical applications using various shapes of metallic nanostructures.

Structural transition in the surfactant layer that surrounds gold nanorods as observed by analytical surface-enhanced Raman spectroscopy

Surface-enhanced Raman spectroscopy (SERS) of gold nanorods in cetyltrimethylammonium bromide solution has been used to analyze the interfacial surfactant structure based on the distance-dependent electromagnetic enhancement. The spectra were consistent with a surfactant bilayer oriented normal to the surface. As the surfactant concentration was reduced, a structural transition in the surfactant layer was observed through a sudden increase in the signal from the alkane chains. The structural transition was shown to influence the displacement of the surfactant layer by thiolated poly(ethylene glycol). The monodisperse and thoroughly characterized gold nanorod samples yield consistent enhancement factors that were compared to electromagnetic simulations.

Highly sensitive nano-porous lattice biosensor based on localized surface plasmon resonance and interference

We propose a design for a highly sensitive biosensor based on nanostructured anodized aluminum oxide (AAO) substrates. A gold-deposited AAO substrate exhibits both optical interference and localized surface plasmon resonance (LSPR). In our sensor, application of these disparate optical properties overcomes problems of limited sensitivity, selectivity, and dynamic range seen in similar biosensors. We fabricated uniform periodic nanopore lattice AAO templates by two-step anodizing and assessed their suitability for application in biosensors by characterizing the change in optical response on addition of biomolecules to the AAO template. To determine the suitability of such structures for biosensing applications, we immobilized a layer of C-reactive protein (CRP) antibody on a gold coating atop an AAO template. We then applied a CRP antigen (Ag) atop the immobilized antibody (Ab) layer. The shift in reflectance is interpreted as being caused by the change in refractive index with membrane thickness. Our results confirm that our proposed AAO-based biosensor is highly selective toward detection of CRP antigen, and can measure a change in CRP antigen concentration of 1 fg/ml. This method can provide a simple, fast, and sensitive analysis for protein detection in real-time.

Reflection spectroscopy for the determination of Au nanostructure formation on carbon surfaces

Au electrodeposition has been performed on carbon electrodes to fabricate Au nanostructures on the working electrode of screen-printed carbon chips. The amount of Au deposited was characterized using the raw reflection spectra obtained by detecting UV-Vis spectrum reflected from the electrode surface. SEM images at different deposition time points provided evidence for the growth of Au nanostructures. The increase in deposition time led to an increase in the intensity of the spectrum obtained for both chips. The acquired optical properties of the carbon chips provide a promising platform for simultaneous optical and electrochemical measurements.

Advances in localized surface plasmon resonance spectroscopy biosensing

In recent years, localized surface plasmon resonance (LSPR) spectroscopy advancements have made it a sensitive, flexible tool for probing biological interactions. Here, we describe the basic principles of this nanoparticle-based sensing technique, the ways nanoparticles can be tailored to optimize sensing, and examples of novel LSPR spectroscopy applications. These include detecting small molecules via protein conformational changes and resonance LSPR spectroscopy, as well as coupling LSPR with mass spectrometry to identify bound analytes. The last few sections highlight the advantages of single nanoparticle LSPR, in that it lowers limits of detection, allows multiplexing on the nanometer scale, and enables free diffusion of sensors in solution. The cases discussed herein illustrate creative ways that LSPR spectroscopy has been improved to achieve new sensing capabilities.

Localized surface plasmon resonance: nanostructures, bioassays and biosensing--a review

Localized surface plasmon resonance (LSPR) is an optical phenomena generated by light when it interacts with conductive nanoparticles (NPs) that are smaller than the incident wavelength. As in surface plasmon resonance, the electric field of incident light can be deposited to collectively excite electrons of a conduction band, with the result being coherent localized plasmon oscillations with a resonant frequency that strongly depends on the composition, size, geometry, dielectric environment and separation distance of NPs. This review serves to describe the physical theory of LSPR formation at the surface of nanostructures, and the potential for this optical technology to serve as a basis for the development bioassays and biosensing of high sensitivity. The benefits and challenges associated with various experimental designs of nanoparticles and detection systems, as well as creative approaches that have been developed to improve sensitivity and limits of detection are highlighted using examples from the literature.

Advances in surface plasmon resonance sensing with nanoparticles and thin films: nanomaterials, surface chemistry, and hybrid plasmonic techniques

Nanomaterials developed for localized surface plasmon resonance (LSPR) are increasingly integrated to classical prism-based SPR sensors, providing enhanced sensitivity and lower detection limits. The unique properties of these novel nanomaterials in addition to novel surface chemistry to minimize nonspecific adsorption and surface plasmon-coupled techniques with other spectroscopic or mass spectrometry techniques are highlighted in this article.

Visible and ultraviolet spectroscopy of gas phase protein ions

Optical spectroscopy has contributed enormously to our knowledge of the structure and dynamics of atoms and molecules and is now emerging as a cornerstone of the gas phase methods available for investigating biomolecular ions. This article focuses on the UV and visible spectroscopy of peptide and protein ions stored in ion traps, with emphasis placed on recent results obtained on protein polyanions, by electron photodetachment experiments. We show that among a large number of possible de-excitation pathways, the relaxation of biomolecular polyanions is mainly achieved by electron emission following photo-excitation in electronically excited states. Electron photodetachment is a fast process that occurs prior to relaxation on vibrational degrees of freedom. Electron photodetachment yield can then be used to record gas phase action spectra for systems as large as entire proteins, without the limitation of system size that would arise from energy redistribution on numerous modes and prevent fragmentation after the absorption of a photon. The optical activity of proteins in the near UV is directly related to the electronic structure and optical absorption of aromatic amino acids (Trp, Phe and Tyr). UV spectra for peptides and proteins containing neutral, deprotonated and radical aromatic amino acids were recorded. They displayed strong bathochromic shifts. In particular, the results outline the privileged role played by open shell ions in molecular spectroscopy which, in the case of biomolecules, is directly related to their reactivity and biological functions. The optical shifts observed are sufficient to provide unambiguous fingerprints of the electronic structure of chromophores without the requirement of theoretical calculations. They constitute benchmarks for calculating the absorption spectra of chromophores embedded in entire proteins and could be used in the future to study biochemical processes in the gas phase involving charge transfer in aromatic amino acids, such as in the mediation of electron transfer or redox reactions. We then addressed the important question of the sensitivity of protein optical spectra to the intrinsic properties of protein ions, including conformation, charge state, etc., and to environmental factors. We report optical spectra for different charge states of insulin, for ubiquitin starting from native and denaturated solutions, and for apo-myoglobin protein. All these spectra are compared critically to spectra recorded in solution, in order to assess solvent effects. We also report the spectra of peptides complexed with metal cations and show that complexation gives rise to new optical transitions related to charge transfer types of excitation. The perspectives of this work include integrative approaches where UV-Vis spectroscopy could, for example, be combined with ion mobility spectrometry and high level calculations for protein structural characterization. It could also be used in spectroscopy to probe biological processes in the gas phase, with different light sources including VUV radiation (to probe different types of excitations) and ultra short pulses with time and phase modulation (to probe and control the dynamics of de-excitation or charge transfer events), and with the derivatization of proteins with chromophores to modulate their optical properties. We also envision that photo-excitation will play an important role in the future to produce intermediates with new chemical and reactive properties. Another promising route is to conduct activated electron photodetachment dissociation experiments.

Design and synthesis of Raman reporter molecules for tissue imaging by immuno-SERS microscopy

The design and synthesis of Raman reporter molecules comprising olefin or alkyne moieties with strong and characteristic vibrational Raman bands is presented. Chemisorption onto the surface of colloidal Au/Ag shells yields a self-assembled monolayer. Hydrophilic stabilization of such SERS labels can be achieved by short terminal ethylene glycol units attached to the Raman reporter. Encapsulation by silica with subsequent functionalization of the glass surface allows the conjugation to biomolecules such as antibodies. We demonstrate the use of SERS-labeled antibodies for tissue imaging of the tumor suppressor p63 in prostate biopsies.

Single plasmonic nanoparticles for biosensing

Along with remarkable progress of nanoplasmonics over the past 10 years, single plasmonic nanoparticle sensors have introduced a completely new dimension to the sensing scale, considering that nanoparticles are comparable in size to biomolecules such as nucleic acids or antibodies. Single particle sensing methods have recently shown the possibility of detecting the adsorption of single biomolecules, and have already provided information about conformational changes of single molecules. For practical application, arrays of such compact sensor units are expected to realize massive multiplexing and high throughput in diagnostics and drug discovery in the near future. In this review, recent achievements and perspectives of this emerging biosensing technique are discussed.