Ultrasensitive photoelectrochemical immunoassay for matrix metalloproteinase-2 detection based on CdS:Mn/CdTe cosensitized TiO2 nanotubes and signal amplification of SiO2@Ab2 conjugates

Self-Enhanced Ultrasensitive Photoelectrochemical Biosensor Based on Nanocapsule Packaging Both Donor-Acceptor-Type Photoactive Material and Its Sensitizer

In this work, a self-enhanced ultrasensitive photoelectrochemical (PEC) biosensor was established based on a functionalized nanocapsule packaging both donor-acceptor-type photoactive material and its sensitizer. The functionalized nanocapsule with self-enhanced PEC responses was achieved first by packaging both the donor-acceptor-type photoactive material (poly{4,8-bis[5-(2-ethylhexyl)thiophen-2-yl]benzo[1,2-b:4,5-b']dithiophene-2,6-diyl-alt-3-fluoro-2-[(2-ethylhexyl)carbonyl]thieno[3,4-b]thiophene-4,6-diyl}, PTB7-Th) and its sensitizer (nano-C60, fullerene) in poly(ethylene glycol) (PEG) to form a nanocapsule, which significantly enhanced PEC signal and stability of the PEC biosensor. Moreover, a quadratic enzymes-assisted target recycling amplification strategy was introduced to the system for ultrasensitive determination. Compared with other established PEC biosensors, our proposed self-enhanced approach showed higher effectivity, accuracy, sensitivity, and convenience without any addition of coreactant or sensitizers into the testing electrolyte for photocurrent amplification and performed excellent analytical properties for microRNA estimation down to femtomole level with microRNA-141 as a model. Additionally, the proposed PEC biosensor was employed for estimation of microRNA in different cancer cells and pharmacodynamic evaluation in cancer cells. This self-enhanced PEC strategy has laid the foundation for fabrication of simple, effective, and ultrasensitive PEC diagnostic devices, leading to the possibility for early diagnosis, timely stage estimation, and accurate prognosis judgment of disease.

Photoelectrochemical Immunosensor for Detection of Carcinoembryonic Antigen Based on 2D TiO2 Nanosheets and Carboxylated Graphitic Carbon Nitride

Carcinoembryonic antigen (CEA) was used as the model, an ultrasensitive label-free photoelectrochemical immunosensor was developed using 2D TiO₂ nanosheets and carboxylated graphitic carbon nitride (g-C₃N₄) as photoactive materials and ascorbic acid as an efficient electron donor. 2D TiO₂ nanosheets was sythsized by surfactant self-assembly method and proved to have higher photoelectrochemical signals than TiO₂ nanoparticles. Firstly, carboxylated g-C₃N₄ could be attached to 2D TiO₂ nanosheets through the bond formed between carboxyl group of carboxylated g-C₃N₄ and TiO₂. And the photocurrent of g-C₃N₄/TiO₂ drastically enhances compared to carboxylated g-C₃N₄ and TiO₂. Then, antibody of CEA was bonded to TiO₂ through the dentate bond formed between carboxyl group of anti-CEA and TiO₂, leading to the decrease of the photocurrents. As proven by PEC experiments and electrochemical impedance spectroscopy (EIS) analysis, the fabrication process of the immunosensor is successful. Under the optimal conditions, the intensity decreased linearly with CEA concentration in the range of 0.01~10 ng/mL. The detection limit is 2.1 pg/mL. The work provides an effective method for the detection of tumor markers and can be extended for the application in food safety and environmental monitoring analysis.

Enhanced photoelectrochemical aptasensing platform amplified through the sensitization effect of CdTe@CdS core–shell quantum dots coupled with exonuclease-I assisted target recycling

The sensitization of CdTe@CdS core–shell quantum dots on N-doped mesoporous TiO₂, integrated with exonuclease-I assisted target recycling, was applied to construct an enhanced photoelectrochemical aptasensing platform.

A competitive photoelectrochemical immunosensor based on a CdS-induced signal amplification strategy for the ultrasensitive detection of dexamethasone

A novel photoelectrochemical immunosensor based on the competitive strategy is proposed for the specific detection of dexamethasone (DXM). Graphitic carbon nitride coupled with bismuth sulfide are used as the sensing matrix for the immobilization of BSA-DXM on the electrode surface, while cadmium sulfide functionalized titanium dioxide (TiO2@CdS) is used as the photoelectric active labels of anti-DXM. Due to the perfect matching of energy levels between TiO2 and CdS, the in situ prepared composite labels show excellent photocurrent response under visible lights. The competitive binding of DXM in sample solutions and BSA-DXM on the electrode surface reduces the specific attachment of labels to the electrode, resulting in a decrease of the photocurrent intensity. Greatly enhanced sensitivity is achieved after the optimization of the detection conditions. Under the optimal detection condition, the well-designed immunosensor for DXM exhibits a low detection limit of 2 pg ∙ mL(-1). Additionally, the proposed immunoassay system shows high specificity, good reproducibility and acceptable stability, which is also expected to become a promising platform for the detection of other small molecules.

A fluorometric microarray with ZnO substrate-enhanced fluorescence and suppressed "coffee-ring" effects for fluorescence immunoassays

A glass slide was first patterned with hydrophobic hexadecyltrimethoxysilane (HDS) and then microspotted with hydrophilic ZnO nanoparticles in an aminopropyltriethoxysilane (APS) matrix. The resulting HDS-ZnO-APS microarray could present the capability of suppressing the undesirable "coffee-ring" effects through its hydrophobic pattern so as to allow the fabrication of ZnO-APS testing microspots with a highly dense and uniform distribution. The lotus-like "self-cleaning" function could also be expected to effectively curb the cross contamination of multiple sample droplets. More importantly, the introduction of ZnO nanoparticles could endow the testing microspots with substrate-enhanced fluorescence leading to signal-amplification microarray fluorometry. The practical application of the developed HDS-ZnO-APS microarray was investigated by the sandwiched fluorometric immunoassays of human IgG, showing a linear detection range from 0.010 to 10.0 ng mL(-1). Such a throughput-improved fluorometric microarray could be tailored for probing multiple biomarkers in complicated media like serum or blood.

Target-induced nano-enzyme reactor mediated hole-trapping for high-throughput immunoassay based on a split-type photoelectrochemical detection strategy

Photoelectrochemical (PEC) detection is an emerging and promising analytical tool. However, its actual application still faces some challenges like potential damage of biomolecules (caused by itself system) and intrinsic low-throughput detection. To solve the problems, herein we design a novel split-type photoelectrochemical immunoassay (STPIA) for ultrasensitive detection of prostate specific antigen (PSA). Initially, the immunoreaction was performed on a microplate using a secondary antibody/primer-circular DNA-labeled gold nanoparticle as the detection tag. Then, numerously repeated oligonucleotide sequences with many biotin moieties were in situ synthesized on the nanogold tag via RCA reaction. The formed biotin concatamers acted as a powerful scaffold to bind with avidin-alkaline phosphatase (ALP) conjugates and construct a nanoenzyme reactor. By this means, enzymatic hydrolysate (ascorbic acid) was generated to capture the photogenerated holes in the CdS quantum dot-sensitized TiO2 nanotube arrays, resulting in amplification of the photocurrent signal. To elaborate, the microplate-based immunoassay and the high-throughput detection system, a semiautomatic detection cell (installed with a three-electrode system), was employed. Under optimal conditions, the photocurrent increased with the increasing PSA concentration in a dynamic working range from 0.001 to 3 ng mL(-1), with a low detection limit (LOD) of 0.32 pg mL(-1). Meanwhile, the developed split-type photoelectrochemical immunoassay exhibited high specificity and acceptable accuracy for analysis of human serum specimens in comparison with referenced electrochemiluminescence immunoassay method. Importantly, the system was not only suitable for the sandwich-type immunoassay mode, but also utilized for the detection of small molecules (e.g., aflatoxin B1) with a competitive-type assay format.

A visible light induced photoelectrochemical aptsensor constructed by aligned ZnO@CdTe core shell nanocable arrays/carboxylated g-C3N4 for the detection of Proprotein convertase subtilisin/kexin type 6 gene

It was reported that Proprotein convertase subtilisin/kexin type 6 (PCSK6) can promote the progression of rheumatoid arthritis to a higher aggressive status. In this work, a novel visible light induced photoelectrochemical (PEC) platform was designed to detect PCSK6 gene. ZnO@CdTe nanocable arrays/carboxylated g-C3N4 used as the PEC signal generator. Hexagonal ZnO nanorods grew on ITO electrode firstly. CdTe were then electrodeposited on the ZnO nanorods surface to enhance the photogenerated h(+)/e(-) separation efficiency. Carboxylated g-C3N4 was utilized to improve h(+)/e(-) separation efficiency and anchor the capture probes of PCSK6 gene by the covalent bonding effect. The 5' and 3' primers captured PCSK6 ssDNA by the specific recognition. The linear range was 10 pg/mL to 20.0 ng/mL with a detection limit of 2 pg/mL.

"Signal-on" photoelectrochemical biosensor for sensitive detection of human T-Cell lymphotropic virus type II DNA: dual signal amplification strategy integrating enzymatic amplification with terminal deoxynucleotidyl transferase-mediated extension

A novel "signal-on" photoelectrochemical (PEC) biosensor for sensitive detection of human T-cell lymphotropic virus type II (HTLV-II) DNA was developed on the basis of enzymatic amplification coupled with terminal deoxynucleotidyl transferase (TdT)-mediated extension strategy. The intensity of the photocurrent signal was proportional to the concentration of the HTLV-II DNA-target DNA (tDNA) by dual signal amplification. In this protocol, GR-CdS:Mn/ZnS nanocomposites were used as photoelectric conversion material, while pDNA was used as the tDNA recognizing unit. Moreover, the TdT-mediated extension and the enzymatic signal amplification technique were used to enhance the sensitivity of detection. Using this novel dual signal amplification strategy, the prototype of PEC DNA sensor can detect as low as ∼0.033 fM of HTLV-II DNA with a linear range of 0.1-5000 fM, with excellent differentiation ability even for single-base mismatches. This PEC DNA assay opens a promising platform to detect various DNA targets at ultralow levels for early diagnoses of different diseases.

Cyclometalated iridium complex-based label-free photoelectrochemical biosensor for DNA detection by hybridization chain reaction amplification

Photoactive material is the most crucial factor which intimately determines analytical performances of the photoelectrochemical sensor. On the basis of the high affinity of dipyrido [3,2-a:2',3'-c] phenazine (dppz) with DNA helix, a novel photoactive intercalator, [(ppy)2Ir(dppz)](+)PF6(-)(ppy = 2-phenylpyridine and dppz = dipyrido [3,2-a:2',3'-c] phenazine) was prepared and characterized by UV-vis absorption spectroscopy, fluorescence spectroscopy, and cyclic voltammetry. The photoelectrochemical properties of the as-prepared iridium(III) complex immobilized on the ITO electrode was investigated. Either cathodic or anodic photocurrent generation can be observed when triethanolamine (TEOA) or dissolved O2 is used as a sacrificial electron donor/acceptor, respectively. The probable photocurrent-generation mechanisms are speculated. A highly sensitive iridium(III) complex-based photoelectrochemical sensor was proposed for DNA detection via hybridization chain reaction (HCR) signal amplification. Under optimal conditions, the biosensor was found to be linearly proportional to the logarithm of target DNA concentration in the range from 0.025 to 100 pmol L(-1) with a detection limit of 9.0 fmol L(-1) (3σ). Moreover, the proposed sensor displayed high selectivity and good reproducibility, demonstrating efficient and stable photoelectric conversion ability of the Ir(III) complex.