Chiral separations

Bis-indole derivatives for polysaccharide compositional analysis and chiral resolution of D-, L-monosaccharides by ligand exchange capillary electrophoresis using borate-cyclodextrin as a chiral selector

A series of aldo-bis-indole derivatives (aldo-BINs) was prepared by aromatic C-alkylation reactions of aldoses and indole in acetic acid solution. Common monosaccharides such as glucose, mannose, galactose, fucose, xylose, rhamnose, ribose, arabinose and N-acetylglucosamine were smoothly derivatized to form the UV absorbing aldo-BINs. The use of a capillary electrophoretic method to separate these novel aldo-BIN derivatives was established. The capillary electrophoresis conditions were set by using borate buffer (100 mM) at high pH (pH 9.0). The limit of determination was assessed to be 25 nM. The enantioseparation of D, L-pairs of aldo-BINs based on chiral ligand-exchange capillary electrophoresis technology was also achieved by using modified hydroxypropyl-β-cyclodextrin as the chiral selector in the presence of borate buffer. This aldose labeling method was applied successfully to the compositional and configurational analysis of saccharides, exemplified by a rapid and efficient method to simultaneously analyze the composition and configuration of saccharides from the medicinal herbs Cordyceps sinensis and Dendrobium huoshanense.

Monosaccharide-NAIM derivatives for D-, L-configurational analysis

The D-, L-enantiomeric pairs of common monosaccharides (xylose, ribose, rhamnose, arabinose, fucose, glucose, mannose, galactose, N-acetylgalactosamine, glucuronic acid and galacturonic acid) were derivatized with 2,3-naphthalenediamine to form the corresponding D-, L-aldo-NAIM derivatives. A simple and facile capillary electrophoretic method was established for sugar composition analysis by simultaneously determining the migration times of these aldo-NAIMs using borate buffer at high pH (100 mM, pH 9.0). The methodology is also applicable to sialic acid (ketose monosaccharides). The quantitation level of the proposed method was in the 10~500 ppm range and the LOD was 1 ppm. The enantioseparation of D, L pairs of aldo-NAIMs were also achieved by using modified sulfated−α−cyclodextrin as the chiral selector in phosphate buffer (300 mM, pH 3.0). In addition, the combination by reductive amination of amino-aldo-NAIM agent and D-, L-enantiomeric pairs of monosaccharides formed a diastereomeric pair for saccharide configuration analysis. Aldo-NAIM derivatives are thus shown to be rapid and efficient agents for analyzing saccharide compositions and configurations with good linearity and short analysis times via capillary electrophoresis.

Enantiomeric fraction as an indicator of pharmaceutical biotransformation during wastewater treatment and in the environment--a review

Enantioselective analysis of some pharmaceuticals during wastewater treatment has the potential to reveal significant insights regarding the effectiveness of biotransformation processes. Furthermore, enantioselective analysis of chiral pharmaceuticals in the aquatic environment may provide a useful historical record revealing the dominant source of (treated or untreated) wastewater contamination. This review of the recent scientific literature has identified only a handful of studies that have directly investigated these promising applications. However, a range of enantioselective analytical techniques are likely to be adaptable from those which have been developed within the pharmaceutical industry. These include direct enantioseparations of enantiomers on chiral stationary phases as well as indirect separations by achiral stationary phases after chiral derivatization to form pairs of physically distinguishable diastereomers. Further investigations of the patterns of enantiomeric fractionation of pharmaceuticals in wastewater and environmental samples will provide an increasingly solid understanding of the relationship between biotransformation processes and the often overlooked parameter of enantiomeric fraction.

Pharmacologically active compounds in the environment and their chirality

Pharmacologically active compounds including both legally used pharmaceuticals and illicit drugs are potent environmental contaminants. Extensive research has been undertaken over the recent years to understand their environmental fate and toxicity. The one very important phenomenon that has been overlooked by environmental researchers studying the fate of pharmacologically active compounds in the environment is their chirality. Chiral drugs can exist in the form of enantiomers, which have similar physicochemical properties but differ in their biological properties such as distribution, metabolism and excretion, as these processes (due to stereospecific interactions of enantiomers with biological systems) usually favour one enantiomer over the other. Additionally, due to different pharmacological activity, enantiomers of chiral drugs can differ in toxicity. Furthermore, degradation of chiral drugs during wastewater treatment and in the environment can be stereoselective and can lead to chiral products of varied toxicity. The distribution of different enantiomers of the same chiral drug in the aquatic environment and biota can also be stereoselective. Biological processes can lead to stereoselective enrichment or depletion of the enantiomeric composition of chiral drugs. As a result the very same drug might reveal different activity and toxicity and this will depend on its origin and exposure to several factors governing its fate in the environment. In this critical review a discussion of the importance of chirality of pharmacologically active compounds in the environmental context is undertaken and suggestions for directions in further research are made. Several groups of chiral drugs of major environmental relevance are discussed and their pharmacological action and disposition in the body is also outlined as it is a key factor in developing a full understanding of their environmental occurrence, fate and toxicity. This review will be of interest to environmental scientists, especially those interested in issues associated with environmental contamination with pharmacologically active compounds and chiral pollutants. As the review will outline current state of knowledge on chiral drugs, it will be of value to anyone interested in the phenomenon of chirality, chiral drugs, their stereoselective disposition in the body and environmental fate (212 references).

Microfluidic sorting of stereoisomers

Isomeric molecules that only differ in the spatial orientation of their constituents are called stereoisomers. We demonstrate that different stereoisomers are transported typically at different velocities in a fluid streaming through a straight microchannel. As the underlying mechanism, we identify a translation-rotation coupling in the motion of the molecules which is specific for the molecule structure. This effect can be exploited for the separation of stereoisomers, a task of immense importance in biotechnology and pharmaceutics.

Fast chiral separation of drugs using columns packed with sub-2 microm particles and ultra-high pressure

The use of columns packed with sub-2 microm particles in liquid chromatography with very high pressure conditions (known as UHPLC) was investigated for the fast enantioseparation of drugs. Two different procedures were evaluated and compared using amphetamine derivatives and beta-blockers as model compounds. In one case, cyclodextrins (CD) were directly added to the mobile phase and chiral separations were carried out in less than 5 min. However, this strategy suffered from several drawbacks linked to column lifetime and low chromatographic efficiencies. In the other case, the analysis of enantiomers was carried out after a derivatization procedure using two different reagents, 2,3,4-tri-O-acetyl-alpha-D-arabinopyranosyl isothiocyanate (AITC) and N-alpha-(2,4-dinitro-5-fluorophenyl)-L-alaninamide (Marfey's reagent). Separation of several amphetamine derivatives contained within the same sample was achieved in 2-5 min with high efficiency and selectivity. The proposed approach was also successfully applied to the enantiomeric purity determination of (+)-(S)-amphetamine and (+)-(S)-methamphetamine. Similar results were obtained with beta-blockers, and the separation of 10 enantiomers was carried out in less than 3 min, whereas the individual separation of several beta-blocker enantiomers was performed in 1 min or less.

Chiral separations

The main goal of this review is to provide a brief overview of chiral separations to researchers who are versed in the area of analytical separations but unfamiliar with chiral separations. To researchers who are not familiar with this area, there is currently a bewildering array of commercially available chiral columns, chiral derivatizing reagents, and chiral selectors for approaches that span the range of analytical separation platforms (e.g., high-performance liquid chromatography, gas chromatography, supercritical-fluid chromatography, and capillary electrophoresis). This review begins with a brief discussion of chirality before examining the general strategies and commonalities among all of the chiral separation techniques. Rather than exhaustively listing all the chiral selectors and applications, this review highlights significant issues and differences between chiral and achiral separations, providing salient examples from specific classes of chiral selectors where appropriate.

Luminescent chiral lanthanide(III) complexes as potential molecular probes

This perspective gives an introduction into the design of luminescent lanthanide(iii)-containing complexes possessing chiral properties and used to probe biological materials. The first part briefly describes general principles, focusing on the optical aspect (i.e. lanthanide luminescence, sensitization processes) of the most emissive trivalent lanthanide ions, europium and terbium, incorporated into molecular luminescent edifices. This is followed by a short discussion on the importance of chirality in the biological and pharmaceutical fields. The second part is devoted to the assessment of the chiroptical spectroscopic tools available (typically circular dichroism and circularly polarized luminescence) and the strategies used to introduce a chiral feature into luminescent lanthanide(iii) complexes (chiral structure resulting from a chiral arrangement of the ligand molecules surrounding the luminescent center or presence of chiral centers in the ligand molecules). Finally, the last part illustrates these fundamental principles with recent selected examples of such chiral luminescent lanthanide-based compounds used as potential probes of biomolecular substrates.

Chiral separations by CE employing CDs

This paper summarizes the history of chiral separations done by using electromigration methods with CDs. Several enantioresolution mechanisms and a wide number of chiral selectors have been applied to the separation of optical isomers by CE. Among them inclusion-complexation with CDs or their derivatives played a very important role in CE. Since the beginning our group was involved in studying method optimization for enantiomer resolution by using these chiral selectors. One of our publications was the basis for further development in the field, at least for us. New chiral selectors, development of theory, new methodological approaches and a wide number of practical applications are the main results achieved in the last almost 25 years using CE as an enantioseparative technique.

Cyclodextrin carriers of positively charged porphyrin sensitizers

The cationic sensitizer 5,10,15,20-tetrakis(N-methylpyridinium-4-yl)porphyrin (TMPyP) forms supramolecular complexes with native, per-methylated, sulfonated and dimethyl-sulfonated cyclodextrins (CDs). Binding interactions were proved by NMR, mass spectra, capillary zone electrophoresis, UV-Vis and fluorescence spectroscopy. The 2D-NMR experiments on native CDs indicate that the interaction of TMPyP with the external CD surface is the dominant binding mode. The high binding affinity of TMPyP towards sulfonated CDs is due to electrostatic interactions. Binding is accompanied by an increase of the TMPyP basicity. Whereas betaCD does not affect the lifetime of the TMPyP triplet states, binding with sulfonated CDs causes the protonation of the TMPyP triplet states even in neutral solution. The diprotonated anionic sensitizer 5,10,15,20-tetrakis(4-sulfonatophenyl)porphyrin (TPPSH(2)(2+)) forms host-guest complexes with native betaCD and gammaCD, similarly as in its non-protonated state. The positive charge of pyrrole nitrogen atoms does not significantly influence the mode of the interaction. In contrast to TMPyP, the lifetimes of the triplet states of bound TPPSH(2)(2+) to native CDs increase.

[Separation of chiral pharmaceutical drugs by chromatographic and electrophoretic techniques]

SUMMARY

A large number of pharmaceutical drugs possess one or more centers of asymmetry giving rise to enantiomers whose pharmacological properties and toxicity are often different. At successive stages of drug discovery, the enantiomers of any chiral molecule must be isolated and analyzed and their enantiomeric purity determined. The electrophoretic and chromatographic techniques have become the most important tools to routinely determine the enantiomeric purity of pharmaceutical molecules. Liquid chromatography (LC) is the most widely used because of the large number of columns marketed, the variety of selectivities available and the ease at which analytical results can be scaled up to the preparative level. In particular, more than 80% of enantioseparations of pharmaceutical molecules are successful with polysaccharide-derivative stationary phases (cellulose, amylose) for multiple system solvents (normal phase, polar organic phase or reverse phase). Complementary selectivities can be achieved more rapidly with other types of stationary phase (glycopeptides, Pirkle, cyclodextrins) but their application is hindered by problems of stability (proteins) or transfer to the preparative scale (cyclodextrins). At the present time, glycopeptide phases offer very promising prospects for the separation of amino acids (and derivatives) and peptide enantiomers. In addition, because of its faster analysis and environmental benefits, supercritical chromatography (SFC) has given rise to renewed interest. Capillary electrophoresis (CE) is an orthogonal technique complementary to chromatographic methods. Its principle involves the formation of diastereoisomer complexes after addition of anionic (HS-beta-CD, HS-gamma-CD CM-beta-CD) or neutral (TM-beta -CD, HP-beta-CD, DM-beta-CD, HP-gamma-CD) cyclodextrins to the running buffer. Compared to LC, CE analyses are cheaper (no chiral column, no solvent, low consumption of chiral selector) and peak efficiencies are higher by one order of magnitude. Furthermore, the mechanism of separation in CE is much simpler to understand and predict. However, the low capacity of CD column prevents its use at the preparative scale and consequently hampers its development as an analytical technique. Today, the increasing number of new drug candidate molecules produced daily, and for which the determination of enantiomeric purity is required before further development, encourages the pharmaceutical industry to seek fast chiral analysis methods based on simple protocols. The speed of analysis is more important than resolution. Thus, screening strategies are implemented with HPLC, SFC and CE including the selection of a limited number of chiral selectors with strong powers of chiral recognition.