Exploiting Photoelectric Activities and Piezoelectric Properties of NaNbO3 Semiconductors for Point-of-Care Immunoassay

In2O3/CdIn2S4 heterojunction-based photoelectrochemical immunoassay of carcinoembryonic antigen with enzymatic biocatalytic precipitation for signal amplification

This work reported a split-type photoelectrochemical (PEC) immunoassay for the detection of carcinoembryonic antigen (CEA) based on target-induced biocatalytic precipitation (BCP) by using In₂O₃/CdIn₂S₄ heterojunctions as the photosensitizers. The synthesized In₂O₃/CdIn₂S₄ heterojunctions improved the efficiency of charge separation and shortened the electron convey path to enhance the photocurrent, thus exhibiting high conductivity and low complexation rates of photogenerated electrons and holes. In the presence of CEA, horseradish peroxidase (HRP) catalyzed 4-chloro-1-naphthol (4-CN) to produce benzo-4-chloro-hexadienone (4-CD) through H₂O₂. Then, 4-CD was deposited onto the surface of In₂O₃/CdIn₂S₄ to reduce the photocurrent and realized the signal amplification. The PEC immunoassay revealed an excellent photocurrent toward target CEA within a wide range of 0.01-50 ng mL^-1 at a low limit of detection of 2.8 pg mL^-1 under the optimum conditions. Multiple switching light excitation tests demonstrated the good reliability and stability of the fabricated PEC biosensor. The accuracy was acceptable in comparison with human CEA enzyme-linked immunosorbent assay (ELISA) kit.

Flexible and High-Throughput Photothermal Biosensors for Rapid Screening of Acute Myocardial Infarction Using Thermochromic Paper-Based Image Analysis

Herein, we developed a flexible, low-cost thermosensitive fiber paper for the visual display in photothermal biosensing systems for early acute myocardial infarction. The thermal signal visualization device was encapsulated with rewritable thermal fibers, which exhibited excellent stability and reversibility. The mechanism of color change in thermal paper was based on a temperature-driven reversible transformation of the structure of the dye molecule (crystalline violet lactone, CVL). It exhibits a gradation from blue to colorless at higher temperatures and gradually returns to blue when the temperature drops. Immobilization and cascade enzymatic reactions of target molecules occurred in an integrated 3D-printed detection device, a photothermal conversion process occurred under near-infrared light excitation, and the colorimetric change values of the encapsulated thermal paper were recorded and evaluated for possible pathogenicity using a smartphone. It was worth noting that the effect of the thermogenic ring-opening behavior of CVL on the macroscopic phenomenon of color change was obtained by density functional theory calculations. Under optimized conditions, the naked-eye-recognizable range of the thermal paper-based photothermal immunoassay sensor was 0.2-20 ng mL-1, This work creatively presents theoretical studies of promising thermal paper-based photothermal biosensors and provides new insights for the development of low-cost, instrument-free portable photothermal biosensors.

Point-of-Care Immunoassay Based on a Multipixel Dual-Channel Pressure Sensor Array with Visual Sensing Capability of Full-Color Switching and Reliable Electrical Signals

The point-of-care (POC) method with affordability and portability for the sensitive detection of biological substances is an emerging topic in rapid disease screening and personalized medicine. In this work, we demonstrated a diverse responsive platform based on a dual-channel pressure sensor (DCPS). The DCPS had a multilayer flexible architecture consisting of a photonic hydrogel with chromatic transitions and a piezoresistive pressure sensor as the electrical data transmission unit, both of which had the property of pressure-induced mechanical stimulus feedback. By incorporating a platinum nanoparticles-labeled detection antibody (PtNPs-dAb) into the sandwich-type immunoreaction for the target carcinoembryonic antigen (CEA, as a model analyte), gas decomposition could be triggered by the addition of hydrogen peroxide (H₂O₂) to induce a significant increase under pressure in a closed chamber. Meanwhile, the DCPS enabled an accurate electrical signal output, and the photonic hydrogel converted spatiotemporal stimuli into eye-readable colorations with string brilliance. In this way, the target concentration could be quantificationally related to the electrical response and intuitively perceived through visible color alterations. Under optimal conditions, a sensitive determination of CEA was performed in a detectable range of 0.3-60 ng/mL with a limit of detection (LOD) of 0.13 ng/mL. In addition, the proposed protocol had satisfactory selectivity, accuracy, and reproducibility. Furthermore, an array-based immunoassay device was fabricated to conceptually validate its application potential in high-throughput biomedical detection and inspire a dual-signal POC diagnostic platform in a friendly way for resource-limited settings.

Magnetic Rolling Circle Amplification-Assisted Single-Particle Collision Immunosensor for Ultrasensitive Detection of Cardiac Troponin I

Owing to its simplicity, high throughput, and ultrasensitivity, single-particle collision electrochemistry (SPCE) has attracted great attention in biosensing, especially labeled SPCE. However, the low signal conversion efficiency and much interference from complex samples limit its wide application. Here, a new and robust SPCE immunosensor was proposed for ultrasensitive cardiac troponin I (cTnI) detection by combining target-driven rolling circle amplification (RCA) with magnetic beads (MBs). Antibody-modified MBs have good stability, dispersity, and magnetic response capacity in complex samples, enabling efficient capture and separation of cTnI with high specificity and anti-interference ability. The presence of cTnI could specifically drive the formation of magnetic immunocomplexes followed by triggering RCA and enzyme digestion reaction. By using Pt nanoparticles (Pt NPs)-modified ssDNA as signal probes, one cTnI molecule could induce the release of 4.5 × 10⁴ Pt NPs for collision experiments, greatly enhancing signal conversion efficiency and detection sensitivity. Based on the integration of MBs with RCA, the SPCE immunosensor realized 0.57 fg/mL cTnI detection with a wide linear range of 1 fg/mL to 50 ng/mL. Furthermore, cTnI detection in serum samples of myocardial infarction patients was successfully performed, demonstrating great application prospect of the SPCE immunosensor in clinical diagnosis.

Functional Nanomaterials in Biomedicine: Current Uses and Potential Applications

Nanomaterials, that is, materials made up of individual units between 1 and 100 nanometers, have lately involved a lot of attention since they offer a lot of potential in many fields, including pharmacy and biomedicine, owed to their exceptional physicochemical properties arising from their high surface area and nanoscale size. Smart engineering of nanostructures through appropriate surface or bulk functionalization endows them with multifunctional capabilities, opening up new possibilities in the biomedical field such as biosensing, drug delivery, imaging, medical implants, cancer treatment and tissue engineering. This article highlights up-to-date research in nanomaterials functionalization for biomedical applications. A summary of the different types of nanomaterials and the surface functionalization strategies is provided. Besides, the use of nanomaterials in diagnostic imaging, drug/gene delivery, regenerative medicine, cancer treatment and medical implants is reviewed. Finally, conclusions and future perspectives are provided.

Investigation of the effect of antibiotics on 5-formylcytosine content in mazie seedling tissues based on photoelectrochemical biosensor

Given the improved photoactivity of Bi₂S₃ by MXene, an article photoelectrochemical biosensor was designed for 5-formyl-2'-deoxycytidine (5fdCTP) detection, where Bi₂S₃: MXene was selected as photoactive material, polydopamine was used as solid electron donor and 5fdCTP capture reagent, calcined ZIF-8(C-ZIF-8) was chosen as the artificial enzyme. With the catalyzed by C-ZIF-8, 4-chloro-1-naphthol was allegro oxidized by H₂O₂ to form the insoluble benzo-4-chlorohexadienone, and then deposited on the surface of the electrode, Resulting in a decrease of the PEC response. Under the optimum conditions, the sensor has a linear range of 0.001-200 nM and a detection limit of 0.51 pM (3σ). The suitability of the developed method was appraised by investigating the effect of antibiotics on 5fdCTP content in the genomic DNA of the roots of maize seedlings. As a new detection platform, the application of this approach can be expanded to investigative the impact of other pollutants on the content of 5fdCTP in plant or animal tissues, explore the feasibility of 5fdCTP as a new indicator for the ecotoxicological effect of pollutants, and the photoelectrochemical method as a new assessment technique for the ecotoxicological effects of pollutants.

Target-Modulated Hydrophobic Precipitation in Photocatalytic Nanochannels for Sensitive Detection of Alpha Fetoprotein

It is important to detect cancer biomarkers at an early stage of tumor development for the effective diagnosis and treatment of cancer. As a well-known probe for detecting superoxide (·O₂^-) radicals, nitro blue tetrazolium (NBT) can rapidly react with ·O₂^- to form a hydrophobic formazan precipitate. In this study, by deliberately utilizing this reaction, Pt asymmetrically decorated on a TiO₂ nanochannel membrane (Pt/TiNM) is explored to fabricate an electrochemical immunosensing platform with outstanding selectivity and ultrahigh sensitivity. Using NBT as the substrate, hydrophobic formazan precipitation induces a substantial block of ionic diffusion flux in nanochannels. Using alpha fetoprotein (AFP) as the target analyte, the established immunorecognition event was used to induce MoS₂-Ab₂ conjugates. Thanks to the excellent light-shielding ability of MoS₂ nanosheets, the production of ·O₂^- radicals from the photocatalysis of Pt/TiNM is effectively depressed because of the attenuated arrival of light. The reduced formazan precipitation results in ionic transport changes in nanochannels, which in turn enables the selective recognition of AFP down to 2 ng mL^-1. This target-modulated sensing strategy is also capable of sensing other immune targets, thus paving a new way for designing nanochannel-based sensing platforms.

Integrated Photothermal-Pyroelectric Biosensor for Rapid and Point-of-Care Diagnosis of Acute Myocardial Infarction: A Convergence of Theoretical Research and Commercialization

Acute myocardial infarction (AMI) survivors face a high risk of mortality as a result of increasing heart failure and irreparable myocardial injury. New portable methods for immediate diagnosis must be developed to provide patients with daily warnings. Herein, the development of a dual-mode photothermal-pyroelectric output system based on a point-of-care platform for rapid AMI detection is reported. Termed as Integrated Photothermal-Pyroelectric Biosensor for AMI (IPPBA), the method leverages cascade enzymatic amplification to convert the target signal into a thermal and pyrooelectric conversion of the testing process by delicate pyroelectric pervokite NaNbO3 nanocubes modified microelectrodes for sensitive detection of cTnI protein in whole blood. In addition, the mechanism of the proposed pyroelectric bioassay model is explored in depth based on in situ variable temperature X-ray diffraction (XRD) lattice change statistics and density function theory (DFT) calculations. With standard samples and under optimized experimental conditions, the proposed IPPBA platform exhibits excellent signal stability and ultra-low detection limit (0.05 ng mL-1 ) for the target cTn I. With further developments in digital technology (e.g., 5G signaling protocols, fully automated systems), the integrated digital bio-testing platform IPPBA is fully capable of accomplishing positive and timely diagnosis of AMI.

Molecularly Imprinted Polymer Functionalized Bi2S3/Ti3C2TX MXene Nanocomposites for Photoelectrochemical/Electrochemical Dual-Mode Sensing of Chlorogenic Acid

We report the proof-of-concept of molecularly imprinted polymer (MIP) functionalized Bi2S3/Ti3C2TX MXene nanocomposites for photoelectrochemical (PEC)/electrochemical (EC) dual-mode sensing of chlorogenic acid (CGA). Specifically, the in-situ growth of the Bi2S3/Ti3C2TX MXene served as a transducer substrate for molecularly imprinted polymers such as PEC and EC signal generators, due to its high surface area, suitable bandwidth and abundant active sites. In addition, the chitosan as a binder was encapsulated into MIP by means of phase inversion on a fluorine-doped tin dioxide (FTO) electrode. In the determination of CGA as an analytical model, the dual-mode sensor based on MIP functionalized Bi2S3/Ti3C2TX MXene nanocomposites had good selectivity, excellent stability and acceptable reproducibility, which displayed a linear concentration range from 0.0282 μM to 2824 μM for the PEC signal and 0.1412 μM to 22.59 μM for the EC signal with a low detection limit of 2.4 nM and 43.1 nM, respectively. Importantly, two dual-response mode with different transduction mechanisms could mutually conform to dramatically raise the reliability and accuracy of detection compared to single-mode detection. This work is a breakthrough for the design of dual-mode sensors and will provide a reasonable basis for the construction of dual-mode sensor platforms.

Zinc-Air Battery-Assisted Self-Powered PEC Sensors for Sensitive Assay of PTP1B Activity Based on Perovskite Quantum Dots Encapsulated in Vinyl-Functionalized Covalent Organic Frameworks

The self-powered sensors have attracted widespread attention in the analysis field due to a huge demand of point-of-care testing (POCT) in the early diagnosis of diseases. However, the output voltage of the reported self-powered sensors is always small, resulting in a narrow linear detection range and low assay sensitivity. Herein, a self-powered photoelectrochemical (PEC) sensor with zinc-air batteries as a power source was developed for activity assay of protein tyrosine phosphatase 1B (PTP1B) based on perovskite quantum dots encapsulated in the vinyl-functionalized covalent organic framework (COF-V). CsPbBr₃ nanocrystals were stabilized by the confinement effect of the COF-V cage without aggregation, and the resulting CsPbBr₃@COF-V composite was used as the cathodic photoelectric material to construct the zinc-air battery with a large open-circuit voltage (OCV, 1.556 V). Before PTP1B activity assay, an auxiliary peptide-polyamidoamine-phosphopeptide (P2-PAMAM-P1) hybrid was introduced into the photocathode via thiol-ene click reaction between the thiol group on the P1 and the vinyl group on the COF-V. The steric hindrance effect of the P1-PAMAM-P2 hybrid inhibited the PEC performance of the photocathode, resulting in a small OCV of the zinc-air battery. When the PTP1B existed, PTP1B-catalyzed dephosphorylation of tyrosine on P1 facilitated the cleavage process of P1 by chymotrypsin, leading to the removal of the P2-PAMAM-P1 hybrid from the photocathode and consequently the enhancement of the OCV. Therefore, the activity of PTP1B was sensitively detected. The developed self-powered PEC sensor showed superior performance for PTP1B activity assay (broad linear response range, 0.1 pM to 10 nM and low detection limit, 0.032 pM) due to the large output voltage of the constructed zinc-air battery and has great potential in POCT of protein phosphatase-related diseases and the discovery of protein phosphatase-targeted drugs.

Contactless Photoelectrochemical Biosensor Based on the Ultraviolet-Assisted Gas Sensing Interface of Three-Dimensional SnS2 Nanosheets: From Mechanism Reveal to Practical Application

This work reports a contactless photoelectrochemical biosensor based on an ultraviolet-assisted gas sensor (UV-AGS) with a homemade three-dimensional (3D)-SnS₂ nanosheet-functionalized interdigitated electrode. After rigorous examination, it was found that the gas responsiveness accelerated and the sensitivity increased using the UV irradiation strategy. The effects of the interlayer structure and the Schottky heterojunction on the gas-sensitive response of O₂ and NH₃ under UV irradiation were further investigated theoretically by 3D electrostatic field simulations and first-principles density functional theory to reveal the mechanism. Finally, a UV-AGS device was developed to quantify the blood ammonia bioassay in a small-volume whole blood sample by alkalizing blood to release gas-phase ammonia with a linear range of 25-5000 μM with a limit of detection (LOD) of 29.5 μM. The device also enables a rapid immunoassay of human cardiac troponin I (cTnI) with a linear range of 0.4-25.6 ng/mL and an LOD of 0.37 ng/mL using a urease-labeled antibody as the immune recognition molecule. Both analyses showed satisfying specificity and stability, suggesting that the device can be applied to practical assays and is of great potential to increase the value of gas-sensitive sensors in chemical biosensing.

Rapid sensing ofTilletia indica - Teliospore in wheat extractby apiezoelectric label free immunosensor

'Tilletia indica', a fungal pathogen causes Karnal bunt disease in wheat. It has been renowned as a quarantine pest in more than 50 countries, therefore, urged a threat to wheat in the international market. To date, conventional methods employed to detect the disease involve the tentative identification of spores (teliospores) based on morphology. For effective and specific disease control, it is essential to get the specific protein of the analyte (teliospore) to target. In present study, a label-free immunosensor has been developed to detect Karnal bunt disease. A specifically synthesized anti-teliosporic monoclonal antibody (mAb) was immobilized on a self-assembled monolayer of 11-mercaptoundecanoic acid (11-MUA) to detect teliospore. All modified electrodes were morphologically characterized by scanning electron microscopy (SEM), atomic force microscopy(AFM), Fourier transform infra-red spectroscopy (FT-IR) techniques and analytically characterized by quartz crystal microbalance (QCM) and cyclic voltammetry (CV). The linearity range was 19 pg mL^-1-10 ng mL^-1, while the detection limit (LOD) was 4.4 pg mL^-1 and 12.5 pg mL^-1, respectively. The stability, reproducibility, and repeatability of the immunoelectrode was examined by CV, and found stable upto 18 days with negligible variation. The binding affinity (association constant (K_a)) of the developed immunoelectrode was 1.9 × 10^-2 ng mL^-1. The real sample has been tested in spiked wheat samples and found about 95-103 % recovery with 2.8-4.4 % relative error.

DNA walker-amplified signal-on electrochemical aptasensors for prostate-specific antigen coupling with two hairpin DNA probe-based hybridization reaction

Electrochemical aptasensing systems have been developed for screening low-abundance disease-related proteins, but most of them involve multiple washings and multi-step separation during measurements, and thus are disadvantageous for routine use. In this work, an innovative and simple electrochemical aptasensing platform was designed for the voltammetric detection of prostate-specific antigen (PSA) in biological fluids without any washing and separation steps. This system mainly included a PSA-specific aptamer, a DNA walker and two hairpin DNA probes (i.e., thiolated hairpin DNA1 and ferrocene-labeled hairpin DNA2). Introduction of target PSA caused the release of the DNA walker from a partially complementary aptamer/DNA walker hybridization strand. The dissociated DNA walker opened the immobilized hairpin DNA1 on the electrode, accompanying subsequent displacement reaction with hairpin DNA2, thus resulting in the DNA walker step-by-step reaction with numerous hairpin DNA1 probes on the sensing interface. In this case, numerous ferrocene molecules were close to the electrode to amplify the voltammetric signal within the applied potentials. All reactions and electrochemical measurements including the target/aptamer reaction and hybridization chain reaction were implemented in the same detection cell. Under optimal conditions, the fabricated electrochemical aptasensor gave good voltammetric responses relative to the PSA concentrations within the range of 0.001-10 ng mL^-1 at an ultralow detection limit of 0.67 pg mL^-1. A good reproducibility with batch-to-batch errors was acquired for target PSA down to 11.5%. Non-target analytes did not interfere with the voltammetric signals of the electrochemical aptasensors. Meanwhile, 15 human serum specimens were measured with electrochemical aptasensors, and displayed well-matched results in comparison with the referenced human PSA enzyme-linked immunosorbant assay (ELISA) method. Significantly, this method provides a new horizon for the quantitative monitoring of low-concentration biomarkers or nucleic acids.

Recent developments on nanomaterial-based optical biosensor as potential Point-of-Care Testing (PoCT) probe in carcinoembryonic antigen detection: A review

For the past decades, several cancer biomarkers have been exploited for rapid and accurate prognosis or diagnosis purposes. In this review, the optical biosensor is targeted for carcinoembryonic antigen (CEA) detection. The CEA level is a prominent parameter currently used in clinical cases for the prognosis of cancer-related diseases. Many nanomaterial-based biosensors are invented as alternatives for the commonly used enzyme-linked immunosorbent assays (ELISA) immunoassay method in CEA detection as the traditional approach but they possess certain drawbacks such as tedious procedure, high technical demand, and costly. Nevertheless, the effort appears to be wasted as none of them are being actualised. Generally, the sensor function was carried out by converting bio-signals generated upon the interface of the receptor into light signals. These sensors were popular due to specific advantages such as sensitivity, being free from chemical and electromagnetic interferences, wide dynamic range, and being easy to be monitored. The features of PoC diagnostics are discussed and associated with the various applications of colorimetric-based and chemiluminescent-based biosensors. The roles of nanomaterials in each application were also summarised by comparing the modification, incubation period, lowest detection limit (LOD) and linear range of detection amount. The challenges and future perspectives were highlighted at the end of the review.

Switchable Multiplex Photoelectrochemical Immunoassay of Aβ42 and Aβ40 Based on a pH-Responsive i-Motif Probe and Pyrene-Based MOF Photocathode

In accurately diagnosing Alzheimer's disease (AD) and distinguishing AD from other dementia, the concentration ratio of amyloid-beta 42 (Aβ₄₂) to Aβ₄₀ is more reliable than the concentration of Aβ₄₂ alone. For the multiplex PEC assay, generating an independent photocurrent of multiple targets on a single interface is a great challenge. Herein, an i-motif-based switchable sensing approach is proposed to construct a pH-regulated multiplex PEC immunosensor for Aβ₄₂ and Aβ₄₀ by using Bi-TBAPy as an efficient photoactive cathode material. An independent photocurrent signal of Aβ₄₂ and Aβ₄₀ is produced through the regulation of the electron-transfer tunneling distance by a pH-dependent configuration transition of the i-motif DNA. In a 96-well plate, immunological recognition of Aβ₄₂ (or Aβ₄₀) coupled with an enzymatic catalytic reaction produces an acidic (or alkaline) lysis solution, which triggers the formation and unravelment of the i-motif structure. The above configuration transition regulates the distance between Au NPs labeled SH-DNA and Bi-TBAPy, leading to PEC signal switching. Smart integration of the pH-responsive switchable DNA probe with a high-efficiency photocathode enables the precise monitoring of Aβ₄₂ and Aβ₄₀ at a single interface in a wide detection range (10 fg/mL ∼ 1 μg/mL and 1 pg/mL ∼ 1 μg/mL) with detection limit of 4.5 fg/mL and 0.52 pg/mL, respectively. The proposed i-motif-based switchable sensing strategy paves a new avenue for a multiplex PEC assay on a single interface, showing great prospects in bioanalysis and early disease diagnosis.

Liposome-Mediated In Situ Formation of Type-I Heterojunction for Amplified Photoelectrochemical Immunoassay

Exploiting innovative sensing mechanisms and their rational implementation for selective and sensitive detection has recently become one of the mainstream research directions of photoelectrochemical (PEC) bioanalysis. In contrast to existing conventional strategies, this study presents a new liposome-mediated method via in situ combining ZnInS nanosheets (ZIS NSs) with SnS2 to form a ZIS NSs/SnS2 type-I heterojunction on fluorine-doped tin oxide (FTO) electrodes for highly sensitive PEC immunoassays. Specifically, alkaline phosphatase (ALP)-encapsulated liposomes were confined within 96-well plates by sandwich immunorecognition and subsequently subjected to lysis treatment. Enzymatically produced H2S by the released ALP was then directed to react with Sn(IV) to engender the ZIS NSs/SnS2 type-I heterojunction on the FTO/ZIS NSs-Sn(IV) electrode, resulting in a change in the photogenerated electron-hole transfer path of the photoelectrode and reduction in current signaling. Exemplified by heart-type fatty acid binding protein (h-FABP) as a target, the constructed PEC sensor showed good stability and selectivity in a biosensing system. Under optimal conditions, the as-prepared sensing platform displayed high sensitivity for h-FABP with a dynamic linear response range of 0.1-1000 pg/mL and a lower detection limit of 55 fg/mL. This research presents the liposome-mediated PEC immunoassay based on in situ type-I heterojunction establishment, providing a new protocol for analyzing various targets of interest.

Portable and sensitive detection of cancer cells via a handheld luminometer

A simple and sensitive chemiluminescent method for portable detection of cancer cells via a handheld luminometer.

Etching reaction of carbon quantum dot-functionalized MnO2 nanosheets with an enzymatic product for photoelectrochemical immunoassay of alpha-fetoprotein

An etching reaction-based photoelectrochemical (PEC) immunoassay was developed to monitor alpha-fetoprotein (AFP) by coupling with the enzymatic product toward the dissolution of MnO2 nanosheets.

Au nanoclusters-decorated WO3 nanorods for ultrasensitive photoelectrochemical sensing of Hg2+

Ultrasensitive photoelectrochemical sensing of Hg2+ is achieved using Au nanocluster-decorated WO3 nanorods as photoactive materials.

Ion-selective electrode-based potentiometric immunoassays for the quantitative monitoring of alpha-fetoprotein by coupling rolling cycle amplification with silver nanoclusters

This work reports an ion-selective electrode-based potentiometric immunoassay for AFP detection coupling rolling cycle amplification with silver nanoclusters.