Dual-Emission of Lanthanide Metal–Organic Frameworks Encapsulating Carbon-Based Dots for Ratiometric Detection of Water in Organic Solvents

Carbon Dots-in-Matrix Boosting Intriguing Luminescence Properties and Applications

As a new class of luminescent nanomaterials, carbon dots (CDs) have aroused significant interest because of their fascinating photoluminescence properties and potential applications in biological, optoelectronic, and energy-related fields. Strikingly, embedding CDs in host matrices endow them with intriguing luminescent properties, in particular, room temperature phosphorescence and thermally activated delayed fluorescence, due to the confinement effect of the host matrix and the H-bonding interactions between CDs and the matrix. Here, the state-of-the-art strategies for introducing CDs in various host matrices are summarized, such as nanoporous materials, polyvinyl alcohol, polyurethane, potash alum, layered double hydroxides, amorphous silica, etc. The resultant luminescent properties of the composites and their emission mechanisms are discussed. Their applications in bioimaging, drug delivery/release, sensing, and anticounterfeiting are also presented. Finally, current problems and challenges of CDs-based composites are noted for future development of such luminescent materials.

[Development of External Stimuli-responsive Organic π Molecules and the Creation of Novel Photo-functions]

We have found that the spiro form of aminobenzopyranoxanthene (ABPX) exhibits dual solvatochromic and nanoaggregate fluorescence in organic solvents by spectrophotometric and theoretical analyses. The dual fluorescence properties of ABPX were adjustable in response to water content, and served as a new detection principal for naked-eye visualization (above 0.5 wt%) and quantification (0.010-0.125 wt%) of water in tetrahydrofuran. In investigating the optical properties of a dicationic form of ABPX, ABPX containing linear n-alkyl chains at amino groups were then synthesized. These ABPX exhibited fluorescence emission in the far-red and NIR wavelength regions, and we noted an increased fluorescence quantum efficiency with increasing n-alkyl chain length. To further improve the fluorescence quantum yields, we have designed and synthesized ABPX with different nitrogen-containing fused rings. It was kinetically demonstrated that the structurally rigid conjugation of the xanthene moiety is an effective molecular design for the drastic enhancement of fluorescence emission efficiency.

Functionalized Chitosan-Carbon Dots: A Fluorescent Probe for Detecting Trace Amount of Water in Organic Solvents

A novel nanoprobe was designed and synthesized by functionalizing chitosan-carbon dots (CDs) with a modified bipyridine-based heterocyclic molecule, 4-(pyridine-2-yl)-3H-pyrrolo[2,3-c]quinoline (PPQ), to detect trace amount of water via fluorescence methods. The functionalized CDs (PPQ-CDs) were thoroughly characterized using dynamic light scattering, UV-vis, X-ray diffraction, Fourier transform infrared, X-ray photoelectron spectroscopy, high-resolution transmission electron microscopy, and NMR techniques. The modified fluorescence intensity of PPQ-CDs was found to be an excellent indicator for water in organic solvents. The PPQ-CDs showed very weak fluorescence intensity in organic solvents due to a possible photoinduced electron transfer (PET) process between PPQ pyrrole nitrogen and acceptor groups of CDs. However, sequential addition of trace amount of water led to continuous enhancement in the fluorescence intensity for the PPQ-CD nanocomposites. The mechanism was proposed to follow suppression of the PET process due to the formation of "free-ions" by the proton transfer from the CD carboxyl group to pyrrole nitrogen through water bridging. The limit of water detection was determined to be 0.023% (v/v) in DMSO.

Ratiometric fluorescent nanoprobes for visual detection: Design principles and recent advances - A review

Signal generation techniques for visual detection of analytes have received a great deal of attention in various sensing fields. These approaches are considered to be advantageous when instrumentation cannot be employed, such as for on-site assays, point-of-care tests, and he althcare diagnostics in resource-constrained areas. Amongst various visual detection approaches explored for non-invasive quantitative measurements, ratiometric fluorescence sensing has received particular attention as a potential method to overcome the limitations of intensity-based probes. This technique relies on changes in the intensity of two or more emission bands (induced by an analyte), resulting in an effective internal referencing which improves the sensitivity of the detection. The self-calibration, together with the unique optophysical properties of nanoparticles (NPs) have made the ratiometric fluorescent nanoprobes more sensitive and reliable, which in turn, can result in more precise visual detection of the analytes. Over the past few years, a vast number of ratiometric sensing probes using nanostructured fluorophores have been designed and reported for a wide variety of sensing, imaging, and biomedical applications. In this work, a review on the NP-based ratiometric fluorescent sensors has been presented to meticulously elucidate their development, advances and challenges. With a special emphasis on visual detection, the most important steps in the design of fluorescent ratiometric nanoprobes have been given and based on different classes of analytes, recent applications of fluorescent ratiometric nanoprobes have been summarized. The challenges for the future use of the technique investigated in this review have been also discussed.

Highly Water-Stable Dye@Ln-MOFs for Sensitive and Selective Detection toward Antibiotics in Water

The host-guest composite, RhB@Tb-dcpcpt, is synthesized by trapping rhodamine B (RhB) into the channels of [Me₂NH₂][Tb₃(dcpcpt)₃(HCOO)]·DMF·15H₂O (Tb-dcpcpt, DMF = N,N'-dimethylformamide) via an ion-exchange process. The photophysical property of RhB@Tb-dcpcpt exhibits stable columinescence of RhB and Tb³⁺ ions in the whole excitation range of 300-390 nm, realizing an excitation-wavelength-independent yellow light emission. Powder X-ray diffraction and photoluminescence analysis illustrate the outstanding stabilities of RhB@Tb-dcpcpt on structural and photophysical properties in water medium. Subsequently, a bifunctional sensing process toward antibiotics is designed in terms of luminescent intensity and color. As a result, RhB@Tb-dcpcpt could realize sensitive and selective detection toward nitrofuran antibiotics (nitrofurazone and nitrofurantoin) via  luminescent quenching process and toward quinolone antibiotics (ciprofloxacin and norfloxacin) via luminescent color-changing process. Systematic analysis on the sensing mechanism reveals that photoinduced electron transfer and inner filter effect contribute to the realization of the sensing process.

A ratiometric fluorescence platform based on boric-acid-functional Eu-MOF for sensitive detection of H2O2 and glucose

A Eu-metal organic framework (Eu-MOF) probe with dual-emission was reported for the ratiometric fluorescence detection of H₂O₂ and glucose. Because of the special nucleophilic reaction between boric group and H₂O₂, Eu³⁺ and 5-boronobenzene-1,3-dicarboxylic acid (BBDC) were selected to synthesize the functional MOF probe via a simple one-pot solvothermal method. The Eu-MOF shows dual-emission at 370 and 623 nm with the single excitation at 270 nm due to the energy transfer efficiency change for antenna effect procedure. After addition of H₂O₂, the red emission of Eu-MOF weakened and the blue emission enhances immediately under 270 nm irradiation, so the ratiometric fluorescence detection is established. Moreover, the obvious color change for visual measuring of H₂O₂ and glucose is illustrated to reveal the merit of Eu-MOF probe. The proposed method was demonstrated to be highly sensitive and selective for H₂O₂ and glucose, with the low detection limits of 0.0335 and 0.0643 μM, respectively. The established boric-acid-functional Eu-MOF sensing platform was proved as the powerful probe for H₂O₂ and the metabolites involved in H₂O₂-generating reaction.

Ratiometric and Turn-On Luminescence Detection of Water in Organic Solvents Using a Responsive Europium-Organic Framework

The development of simple, rapid-response sensors for water detection in organic solvents is highly desirable in the chemical industry. Here we demonstrate a unique luminescence water sensor based on a dual-emitting europium-organic framework (Eu-MOF), which is assembled from a purposely selected 2-aminoterephthalic acid ligand with responsive fluorescence inherent in its intramolecular charge transfer (ICT) process. This ICT process can be rapidly switched-on in the presence of water owing to its ability to boost and stabilize the ICT state. In contrast, the Eu³⁺ emission within the framework is insensitive to water and can serve as a reference, thus enabling highly sensitive water detection in a turn-on and ratiometric way. In addition, the significant ratiometric luminescence response induced by water makes Eu-MOF undergo a distinct change of emitting color from red to blue, which is favorable for visual analysis with the naked eye. Sensitive determination of water content (0.05-10% v/v) in various organic solvents is achieved in multiple readouts including ratiometric emission intensity, emission color, or the Commission Internationale de l'Eclairage (CIE) chromaticity coordinate. The present Eu-MOF sensor featuring high sensitivity and reusability, self-calibration, simple fabrication and operation, and capability for real-time and in situ detection is expected to have practical applications in water analysis for industrial processes.

Colorimetric and ratiometric fluorescence sensing of water based on 9-methyl pyrido[3,4-b]indole-boron trifluoride complex

In this work, 9-methyl pyrido[3,4-b]indole-boron trifluoride complex, 9-MP-BF3, was designed and developed as a colorimetric and ratiometric fluorescent sensor for the detection of water in the low- and high-water-content regions in solvents. In the low-water-content region, a new photoabsorption band at around 360 nm and a fluorescence band at around 370 nm gradually appeared due to the dissociation of 9-MP-BF3 into 9-methyl pyrido[3,4-b]indole (9-MP) by water molecules with a simultaneous decrease in the photoabsorption band at around 390 nm and the fluorescence band at around 460 nm originating from 9-MP-BF3. In the moderate-water-content region, the photoabsorption band at around 360 nm and the fluorescence band at around 370 nm gradually shifted to a longer wavelength region with an increase in the fluorescence intensity, which could be ascribed to the formation of a hydrogen-bonded complex (9-MP-H2O) with water molecules. Furthermore, in the high-water-content region, two photoabsorption bands at around 305 nm and 390 nm and one fluorescence band at around 460 nm gradually reappeared with simultaneous decrease in the photoabsorption band at around 290 nm and the fluorescence band at around 370 nm, which was attributed to the formation of a hydrogen-bonded proton transfer complex (9-MP-H+) with water molecules. Thus, this work revealed the mechanism of a colorimetric and ratiometric fluorescent sensor based on pyrido[3,4-b]indole-boron trifluoride complex for the detection of water over a wide range from low water content to high water content in solvents.

A Dual Associated-Functional Fluorescent Switch: From Alternate Detection Cycle for Fe(III) and pH to Molecular Logic Operations

With the expansion and deepening of scientific research, dual-functional or multifunctional materials are urgently needed to replace those for single application. Herein, a fluorescence sensing system based on an In(III)-organic complex with in situ Lewis acid sites has been constructed, exhibiting high sensitivity for the detection of Fe(III) ions with a low detection limit of 3.95 μM and a short response time of within 10 s. It is noteworthy that the quenched fluorescence of the Fe(III)-incorporated sample could be reopened linearly with an increase of alkalinity, followed by the reactivation of its functionality to identify Fe(III) ions, forming an alternate detection cycle for Fe(III) and pH with off-on-off fluorescent switch characteristics. Considering its unique molecular recognition capability, an advanced three-input (Fe(III), EDTA, and OH^-) and two-output (B440 and G489) Boolean logic operation comprising BUFF, NOT, OR, and AND logic gates was integrated, possessing potential applications in intelligent multianalyte sensing systems.

White-Light-Emitting Decoding Sensing for Eight Frequently-Used Antibiotics Based on a Lanthanide Metal-Organic Framework

Developing multi-selective luminescence sensing technology to differentiate serial compounds is very important but challenging. White-light-emitting decoding sensing based on lanthanide metal-organic frameworks (Ln-MOFs) is a promising candidate for multi-selective luminescence sensing application. In this work, three isomorphic Ln-MOFs based on H₃dcpcpt (3-(3,5-dicarboxylphenyl)-5-(4-carboxylphenl)-1H-1,2,4-triazole) ligand, exhibiting red, blue, and green emission, respectively, have been synthesized by solvothermal reactions. The isostructural mixed Eu/Gd/Tb-dcpcpt is fabricated via the in-situ doping of different Ln³⁺ ions into the host framework, which can emit white light upon the excitation at 320 nm. It is noteworthy that this white-light-emitting complex could serve as a convenient luminescent platform for distinguishing eight frequently-used antibiotics: five through luminescence-color-changing processes (tetracycline hydrochloride, yellow; nitrofurazone, orange; nitrofurantoin, orange; sulfadiazine, blue; carbamazepine, blue) and three through luminescence quenching processes (metronidazole, dimetridazole, and ornidazole). Moreover, a novel method, 3D decoding map, has been proposed to realize multi-selective luminescence sensing applications. This triple-readout map features unique characteristics on luminescence color and mechanism. The mechanism has been systematically interpreted on the basis of the structural analysis, energy transfer and allocation process, and peak fitting analysis for photoluminescence spectra. This approach presents a promising strategy to explore luminescent platforms capable of effectively sensing serial compounds.

A water-stable EuIII-based MOF as a dual-emission luminescent sensor for discriminative detection of nitroaromatic pollutants

This work reports a water-stable Eu^III-based MOF as the first MOF sensor for detecting nitroaromatic compounds discriminatively by ratiometric methods.

One-step fabrication of a boric acid-functionalized lanthanide metal–organic framework as a ratiometric fluorescence sensor for the selective recognition of dopamine

A boric acid-functionalized Eu-MOF ratiometric fluorescence sensor was prepared for the selective recognition of dopamine.

Construction of a crystalline 14-metal Zn–Nd rectangular nanocluster with a dual-emissive response towards metal ions

A crystalline 14-metal Zn–Nd cluster [Zn₆Nd₈L₂(OAc)₂₀(O)₂(NO₃)₄(OC₂H₅)₄] (1) was constructed using a flexible Schiff base ligand with long-chain (CH₂)₂O(CH₂)₂O(CH₂)₂ backbone. 1 exhibits a nanoscale rectangular structure (10 × 14 × 18 Å). Besides the visible ligand-centered emission, 1 displays typical NIR luminescence of Nd³⁺. Interestingly, 1 shows both a ligand-centered and lanthanide fluorescence response towards metal ions, especially to K⁺ and Co²⁺ at the ppm level.

A crystalline 14-metal Zn–Nd nanocluster was constructed, and it shows ligand-centered and lanthanide fluorescence response towards metal ions.

Development of an intramolecular charge transfer-type colorimetric and fluorescence sensor for water by fusion with a juloidine structure and complexation with boron trifluoride

An intramolecular charge transfer-type optical sensor fused with a juloidine structure and complexed with boron trifluoride can detect and determine water over a wide concentration range.

Construction of a ratiometric phosphorescent assay with long-lived carbon quantum dots and inorganic nanoparticles for its application in environmental and biological systems

An effective ratiometric phosphorescence assay for Hg²⁺ detection is established based on carbon quantum dots and inorganic nanoparticles (CDs–CaTiO₃:Pr³⁺@SiO₂).

Highly fluorescent dual-emission red carbon dots and their applications in optoelectronic devices and water detection

Synthesis of dual-emission nitrogen and sulfur co-doped (N,S)-CDs with a quantum yield up to 29.7% and their applications in white LEDs and water detection.

Ratiometric fluorescence detection of trace water in an organic solvent based on bimetallic lanthanide metal–organic frameworks

A highly sensitive sensor Tb97.11Eu2.89-L1, which is an excellent water-sensing material for detecting trace water in an organic solvent, is reported.

Nanomaterials for luminescent detection of water and humidity

Significant advances of typical nanomaterials in the luminescent detection of water and humidity are presented.

Near-Infrared Silicon Photonic Crystals with High-Order Photonic Bandgaps for High-Sensitivity Chemical Analysis of Water-Ethanol Mixtures

Aqueous solutions of alcohols are used in several applications, from pharmaceutics and biology, to chemical, biofuel, and food industries. Nonetheless, development of a simple, inexpensive, and portable sensing device for the quantification of water in water-ethanol mixtures remains a significant challenge. Photonic crystals (PhCs) operating at very high-order photonic bandgaps (PBGs) offer remarkable opportunities for the realization of chemical sensors with high sensitivity and low detection limit. However, high-order PhC structures have been mostly confined to mere theoretical speculations so far, their effective realization requiring microfabrication tools enabling the control of periodic refractive index modulations at the submicrometric scale with extremely high accuracy and precision. Here, we report both experimental and theoretical results on high-sensitivity chemical analysis using vertical, silicon/air 1D-PhCs with spatial period of 10 and 20 μm (namely, over 10 times the operation wavelength) featuring ultra-high-order PBGs in the near-infrared region (namely, up to 50th at 1.1 μm). Fabrication of high-order 1D-PhCs was carried out by electrochemical micromachining (ECM) of silicon, which allowed both surface roughness and deviation from vertical of etched structures to be controlled below 5 nm and 0.1%, respectively. Optical characterization of ECM-fabricated 1D-PhCs, which was performed by acquiring reflectivity spectra over the wavelength range 1-1.7 μm, highlighted the presence of ultra-high-order PBGs with minor optical losses (i.e., <1 dB in reflectivity) separated by deep reflectivity notches with high Q-factors (i.e., >6000), in good agreement with theoretical calculations. Remarkably, the use of high-order 1D-PhCs as refractometric transducers for the quantitative detection of traces of water in water-ethanol mixtures, allowed high sensitivity (namely, either 1000 nm/RIU or ∼0.4 nm/% of water), good detection limit (namely, 5 × 10^-3 RIU or ∼10% water), and excellent resolution (namely, either 6 × 10^-4 RIU or 1.6% of water) to be reliably achieved on a detection volume of about 168 fL.

CH3NH3PbBr3 Perovskite Nanocrystals Encapsulated in Lanthanide Metal-Organic Frameworks as a Photoluminescence Converter for Anti-Counterfeiting

The increasing demands for optical anti-counterfeiting technology require the development of versatile luminescent materials with multiple models and tunable photoluminescence. Herein, the combination of luminescent perovskite nanocrystals and lanthanide-based metal-organic frameworks (Ln-MOFs) has been developed to offer such a high-tech anti-counterfeiting solution. The hybrid materials have been fabricated via the encapsulation of perovskite CH₃NH₃PbBr₃ nanocrystals in europium-based metal-organic frameworks (Eu-MOFs) and they display multistage anti-counterfeiting behavior. CH₃NH₃PbBr₃@Eu-MOF hybrids were developed in a two-step process, where the PbBr₂@Eu-MOF precursor was formed first and, then, the composites can be formed quickly by the addition of CH₃NH₃Br into the precursors. Accordingly, the hybrid composites exhibited both excitation wavelength and temperature-dependent luminescence properties in the form of powders or films. Furthermore, the photoluminescence of the CH₃NH₃PbBr₃@Eu-MOF composites can be quenched and recovered through water immersion and CH₃NH₃Br conversion, and the anti-counterfeiting applications have also been discussed. Therefore, this finding will open the opportunity to fabricate the hybrid materials with controlled photoluminescence properties, and it also acts as the emerging anti-counterfeiting materials in versatile fields.

Advances in the integration of quantum dots with various nanomaterials for biomedical and environmental applications

Quantum dots (QDs) are semiconductor nanocrystals with distinct characteristics of high brightness, large Stokes shift and broad absorption spectra, large molar extinction coefficients, high quantum yield, good photostability and long fluorescence lifetime. The QDs have replaced the conventional fluorophores with wide applications in immunoassays, microarrays, fluorescence imaging, targeted drug delivery and therapy. The integration of QDs with various nanomaterials such as noble metal nanoparticles, carbon allotropes, upconversion nanoparticles (UCNPs), metal oxides and metal-organic frameworks (MOFs) brings new opportunities and possibilities in nanoscience and nanotechnology. In this review, we summarize the recent advances in the integration of QDs with various nanomaterials for biomedical and environmental applications including sensing, bioimaging, theranostics and cancer therapy. We highlight the involved interactions such as fluorescence resonance energy transfer (FRET), plasmon enhanced fluorescence (PEF), and nanometal surface energy transfer (NSET) as well as the synergistic effect resulting from the integration of QDs with nanomaterials. In addition, we discuss the sensing and imaging mechanisms of different strategies and give new insight into the challenges and future direction as well.

Facile synthesis of carbon nanodots with surface state-modulated fluorescence for highly sensitive and real-time detection of water in organic solvents

In our study, the carbon nanodots (CDs) were synthesized by one-step solvothermal method using resorcinol as the only presusor. The obtained CDs contained abundant unsaturated oxygen-containing groups resulting from the surface oxidation. A novel, simple, and real-time fluorescent assay for the detection of water in various organic solvents was thus established by reducing the surface oxidation states. Excellent reversibility can be readily achieved by the external stimulus water and N,N'-dicyclohexylcarbodiimide (DCC). The water-induced sensitive (limit of detection = 0.006%, v/v, in ethanol) and ultrafast (<1 s) response in emission properties was capable of water determination in spirit samples in both solution and solid-state paper test strips.

Effects of C-Related Dangling Bonds and Functional Groups on the Fluorescent and Electrochemiluminescent Properties of Carbon-Based Dots

Single-layer carbon-based dots (SCDs) were chosen as a model to investigate the effect of the C-related dangling bonds with spin S=1/2 and functional groups on the electrochemiluminescent (ECL) and fluorescent (FL) properties of CDs. The C-related dangling bonds and functional groups of SCDs were tuned by chemical reduction with NaBH₄ . There have several main findings via investigating the ECL and FL properties of SCDs before and after the chemical reduction. First, the FL and ECL of CDs are highly dependent on their concentration, and luminescent resonance energy transfer is observed in ECL studies when the concentration of CDs is high. Second, the ECL activity of CDs is greatly enhanced as the C-related dangling bonds increase, proving that the ECL of CDs originates from the C-related dangling bonds. Third, the FL of CDs is the synthesis of the inner FL originated from the contained isolated sp² units and the defect FL from the C-related dangling bonds. The inner FL of CDs is enhanced greatly by removing the carboxyl groups, while the defect FL is increased slightly due to the increased C-related dangling bonds. We believe this study would promote our understanding in the ECL and FL mechanisms of CDs, advancing the applications of CDs based on their ECL and FL properties.

A dual-emission nano-rod MOF equipped with carbon dots for visual detection of doxycycline and sensitive sensing of MnO4. RSC Adv 2018;8:4766-4772. [PMID: 35539556 PMCID: PMC9077844 DOI: 10.1039/c7ra12252g]

Herein, ethanediamine-modified carbon dots (CDs) were encapsulated into luminescent MOF(Eu), which was designed for a dual-emission hybrid material (CDs@MOF(Eu)) with diverse fluorescence applications. This material exhibited high selectivity and sensitivity towards doxycycline. With an increasing concentration of doxycycline, the blue light emission of CDs could be quenched, whereas the red light emission of MOF(Eu) was enhanced. In view of this result, more convenient "test paper" was used first as a new tool for doxycycline detection, the colour of which turned from blue-purple to red as observed by the naked eyes under 365 nm UV-irradiation. This hybrid material also was a probe for sensing MnO4 - with a low limit of detection and good anti-interference performance. We propose that CDs can improve detection sensitivity compared with the original MOF(Eu). The possible sensing mechanism was discussed in detail. Importantly, the feasibility of this composite for sensing doxycycline in a simulated biological system and sensing MnO4 - in tap water was investigated.

Carbon nanodots in ZIF-8: synthesis, tunable luminescence and temperature sensing

A new hybrid material CNDs@ZIF-8 with tunable luminescence and temperature-responsive photoluminescence has been synthesized by a low temperature-calcination method. An approximate white light has been achieved by combining the blue emission of ZIF-8 framework and the high yellow emission of CNDs.

Tetraphenylethene– and diphenyldibenzofulvene–anthracene-based fluorescence sensors possessing photo-induced electron transfer and aggregation-induced emission enhancement characteristics for detection of water

RS-1 and RS-2 have been developed as PET/AIEE hybrid fluorescence sensors for detection of water in the low and high water content regions in solvents.

Ratiometric fluorescence detection of trace water in organic solvents based on aggregation-induced emission enhanced Cu nanoclusters

A novel dual-emission fluorescent nanocomposite material, CDs/Cu NCs, was fabricated for detecting trace water in organic solvents (DMSO, DMF, THF, and ACN).

Carbon Nanodots as Dual-Mode Nanosensors for Selective Detection of Hydrogen Peroxide

Hydrogen peroxide (H2O2) is an important product of oxidase-based enzymatic reactions, such as glucose/glucose oxidase (GOD) reaction. Therefore, the probing of generated H2O2 for achieving the detection of various carbohydrates and their oxidases is very significative. Herein, we report one kind of dual-emission carbon nanodots (CDs) that can serve as novel dual-mode nanosensors with both fluorometric and colorimetric output for the selective detection of H2O2. The dual-model nanosensors are established only by the undecorated dual-emission CDs, where significant fluorometric and colorimetric changes are observed with the addition of different concentrations of H2O2 in the CD solution, which benefit to the achievement of the naked-eye detection for H2O2. The mechanism of the nanosensors can be attributed to the fact that the external chemical stimuli like hydroxyl radicals from H2O2 bring about the change of surface properties and the aggregation of CDs, which dominate the emission and absorption of CDs. The constructed dual-mode nanosensors exhibit good biocompatibility and high selectivity toward H2O2 with a linear detection range spanning from 0.05 to 0.5 M and allow the detection of H2O2 as low as 14 mM.

Fluorescent Silicon Nanorods-Based Ratiometric Sensors for Long-Term and Real-Time Measurements of Intracellular pH in Live Cells

Long-term and real-time investigation of the dynamic process of pH_i changes is critically significant for understanding the related pathogenesis of diseases and the design of intracellular drug delivery systems. Herein, we present a one-step synthetic strategy to construct ratiometric pH sensors, which are made of europium (Eu)-doped one-dimensional silicon nanorods (Eu@SiNRs). The as-prepared Eu@SiNRs have distinct emission maxima peaks at 470 and 620 nm under 405 nm excitation. Of particular note, the fluorescence emission intensity at 470 nm decreases along with the increase of pH, while the one at 620 nm is nearly unaffected by pH changes, making Eu@SiNRs a feasible probe for pH sensing ratiometrically. Moreover, Eu@SiNRs are found to be responsive to a broad pH range (ca. 3-9), biocompatible (e.g., ∼100% of cell viability during 24 h treatment) and photostable (e.g., ∼10% loss of intensity after 40 min continuous UV irradiation). Taking advantages of these merits, we employ Eu@SiNRs for the visualization of the cytoplasmic alkalization process mediated by nigericin in living cells, for around 30 min without interruption, revealing important information for understanding the dynamic process of pH_i fluctuations.

XEOL spectroscopy of lanthanides in aqueous solution

As part of an ongoing study of the electronic interactions between solute and solvent molecules, a method for X-ray excited optical luminescence (XEOL) analysis of aqueous solutions was developed at the double-crystal monochromator beamline (DCM) of the Canadian Synchrotron Radiation Facility (CSRF). It was tested using a series of solutions containing lanthanide ions. The samples were contained in a sample holder for liquids with a 3 μm Mylar window separating them from the vacuum (≤3 × 10−6 torr, 1 torr = 133.3224 Pa) in the solid state absorption chamber of the DCM beamline. Terbium, samarium, and dysprosium have 4 intense and narrow luminescence peaks between 450 and 700 nm, well separated from the luminescence peak of the Mylar window between 300 and 425 nm. The intensity of the rare earth (RE3+) luminescence peaks was lower for the solutions than for solid RECl3·6H2O. In part, this was caused by the lower RE3+ concentration in the solutions than in the solid. In addition, the solvent (water) acts as a quencher. The disorder and the molecular motion in the solution increase the availability of nonradiative de-excitation pathways. A high concentration of SO42− in the solution enhanced the luminescence intensity, probably by inhibiting some nonradiative de-excitation pathways. This study has shown that it is in principle possible to investigate the luminescence of aqueous solutions with XEOL spectroscopy. Furthermore, it is possible to use this technique as a quantitative analytical tool for concentrated luminescent solutions and to study the shielding effects of anions in the solution that increase the luminescence intensity.

Steric paper based ratio-type electrochemical biosensor with hollow-channel for sensitive detection of Zn2

The construction of flexible platform possessing the functions of immobilizing, separating, rinsing, and high-throughput analysis plays a significant role in biological and clinical research. Herein, hollow-channel technique was integrated with lab-on-paper for the simultaneous determination of two different concentrations of Zn²⁺ based on the origami principle, in which microfluidic channels were first patterned on a cellulose paper using commercial solid-state wax printer. Hollow-channels were created by laser cutting method as the role of both injecting ending and reaction tank. After screen printing three electrodes system, the resulting planar paper sheets were then folded into steric structures and functionalized by in-situ synthesized reduced graphene oxide. As a proof-of-concept, such lab-on-paper device was employed in the ratiometric electrochemical monitoring of zinc ion from the environment and HepG2 cells extract, by combining with co-catalysis of porous metal-organic frameworks and hemin/G-quadruplex toward H₂O₂ in the linear range of 0.1-7,000nmol/L. The results indicated that integrating hollow-channel with steric lab-on-paper offered a new methodological approach for the development of metal ions monitoring research. It is believed that it could be useful for various point-of-care related research fields, such as, on-site environmental monitoring, food safety, and disease diagnosis.

Ratiometric fluorescence detection of superoxide anion based on AuNPs-BSA@Tb/GMP nanoscale coordination polymers

A novel ratiometric fluorescence nanosensor for superoxide anion (O₂^•- ) detection was designed with gold nanoparticles-bovine serum albumin (AuNPs-BSA)@terbium/guanosine monophosphate disodium (Tb/GMP) nanoscale coordination polymers (NCPs) (AuNPs-BSA@Tb/GMP NCPs). The abundant hydroxyl and amino groups of AuNPs-BSA acted as binding points for the self-assembly of Tb³⁺ and GMP to form core-shell AuNPs-BSA@Tb/GMP NCP nanosensors. The obtained probe exhibited the characteristic fluorescence emission of both AuNPs-BSA and Tb/GMP NCPs. The AuNPs-BSA not only acted as a template to accelerate the growth of Tb/GMP NCPs, but also could be used as the reference fluorescence for the detection of O₂^•- . The resulting AuNPs-BSA@Tb/GMP NCP ratiometric fluorescence nanosensor for the detection of O₂^•- demonstrated high sensitivity and selectivity with a wide linear response range (14 nM-10 μM) and a low detection limit (4.7 nM).

High-Crystallinity Covalent Organic Framework with Dual Fluorescence Emissions and Its Ratiometric Sensing Application

High crystallinity of covalent organic frameworks (COFs) with dual fluorescence emissions has not been reported so far. Here, we show the rational design and preparation of high-crystallinity COF TzDa via the synergetic interaction of docking sites and hydrogen bonds: 4,4',4″-(1,3,5-Triazine-2,4,6-triyl)trianiline (Tz) with the docking site and 2,5-dihydroxyterephthalaldehyde (Da) with the OH group are employed to synthesize the imine-linked two-dimensional high-crystallinity layered structure TzDa. The prepared mesoporous TzDa (ca. 36 Å) exhibits high thermal and chemical stability. The intramolecular charge transfer (ICT) and excited-state intramolecular proton transfer (ESIPT) effects bring TzDa two main fluorescence emissions around 500 and 590 nm. Water molecules can interfere with the ICT and ESIPT effects, allowing the development of a ratiometric fluorescent sensor for water in organic solvents. The proposed sensor shows high sensitivity to trace water in conventional organic solvents. The high stability of TzDa allows its recyclable uses for trace water detection. This work not only offers a platform for the construction of high-crystallinity COFs, but also provides a rational design of COFs with dual fluorescence emissions for ratiometric sensing applications.