How Catalysts and Experimental Conditions Determine the Selective Hydroconversion of Furfural and 5-Hydroxymethylfurfural

A paradigm shift towards production of sustainable bioenergy and advanced products from Cannabis/hemp biomass in Canada

The global cannabis (Cannabis sativa) market was 17.7 billion in 2019 and is expected to reach up to 40.6 billion by 2024. Canada is the 2nd nation to legalize cannabis with a massive sale of $246.9 million in the year 2021. Waste cannabis biomass is managed using disposal strategies (i.e., incineration, aerobic/anaerobic digestion, composting, and shredding) that are not good enough for long-term environmental sustainability. On the other hand, greenhouse gas emissions and the rising demand for petroleum-based fuels pose a severe threat to the environment and the circular economy. Cannabis biomass can be used as a feedstock to produce various biofuels and biochemicals. Various research groups have reported production of ethanol 9.2-20.2 g/L, hydrogen 13.5 mmol/L, lipids 53.3%, biogas 12%, and biochar 34.6% from cannabis biomass. This review summarizes its legal and market status (production and consumption), the recent advancements in the lignocellulosic biomass (LCB) pre-treatment (deep eutectic solvents (DES), and ionic liquids (ILs) known as "green solvents") followed by enzymatic hydrolysis using glycosyl hydrolases (GHs) for the efficient conversion efficiency of pre-treated biomass. Recent advances in the bioconversion of hemp into oleochemicals, their challenges, and future perspectives are outlined. A comprehensive insight is provided on the trends and developments of metabolic engineering strategies to improve product yield. The thermochemical processing of disposed-off hemp lignin into bio-oil, bio-char, synthesis gas, and phenol is also discussed. Despite some progress, barricades still need to be met to commercialize advanced biofuels and compete with traditional fuels.

Identification of Crucial Intermediates in the Formation of Humins from Cellulose-Derived Platform Chemicals Under Brønsted Acid Catalyzed Reaction Conditions

Humins are one of the undesirable products formed during the dehydration of sugars as well as the conversion of 5-hydroxymethylfurfural (HMF) to value-added products. Thus, reducing the formation of humins is an important strategy for improving the yield of the aforementioned reactions. Even after a plethora of studies, the mechanism of formation and the structure of humins are still elusive. In this regard, we have employed density functional theory-based mechanistic studies and microkinetic analysis to identify crucial intermediates formed from glucose, fructose, and HMF that can initiate the polymerization reactions resulting in humins under Brønsted acid-catalyzed reaction conditions. This study brings light into crucial elementary reaction steps that can be targeted for controlling humins formation. Moreover, this work provides a rationale for the experimentally observed aliphatic chains and HMF condensation products in the humins structure. Different possible polymerization routes that could contribute to the structure of humins are also suggested based on the results. Importantly, the findings of this work indicate that increasing the rate of isomerization of glucose to fructose and reducing the rate of reaction between HMF molecules could be an efficient strategy for reducing humins formation.

Controlled hydrogenation of a biomass-derived platform chemical formed by aldol-condensation of 5-hydroxymethyl furfural (HMF) and acetone over Ru, Pd, and Cu catalysts

We studied the hydrogenation at temperatures from 313 - 393 K of a biomass-derived platform molecule, 5-hydroxymethyl furfural (HMF)-Acetone-HMF (HAH) over Pd, Ru, and Cu based catalysts. HAH was selectively hydrogenated to produce partially-hydrogenated monomers (PHAH) over Cu and Ru catalysts and to fully-hydrogenated HAH monomers (FHAH) over the Ru catalyst. Pd based catalysts yielded a mixture of partially and fully hydrogenated monomers. Lumped reaction kinetics models were employed to quantify the kinetic behavior for hydrogenation over Ru, Cu, and Pd catalysts. The 5-step pathway exhibited over Pd and Ru catalysts consists of both series and parallel reaction steps, where HAH is both converted to fully hydrogenated products sequentially via series reactions of partially hydrogenated intermediates, as well as converted directly in parallel reactions to form the fully hydrogenated products. In contrast, the 3-step pathway over the Cu catalyst consists only of the consecutive reaction steps, where the final product was formed via series reactions of intermediate products. Additionally, reaction over the Cu catalyst did not hydrogenate the furan rings of the HAH molecule and yielded a different final product than those hydrogenation over Pd and Ru catalysts. Batch conditions are determined for each hydrogenated product that give the highest yields in both batch and plug flow reactors.

Chemocatalytic value addition of glucose without carbon-carbon bond cleavage/formation reactions: an overview

As the monomeric unit of the abundant biopolymer cellulose, glucose is considered a sustainable feedstock for producing carbon-based transportation fuels, chemicals, and polymers. The chemocatalytic value addition of glucose can be broadly classified into those involving C-C bond cleavage/formation reactions and those without. The C6 products obtained from glucose are particularly satisfying because their syntheses enjoy a 100% carbon economy. Although multiple derivatives of glucose retaining all six carbon atoms in their moiety are well-documented, they are somewhat dispersed in the literature and never delineated coherently from the perspective of their carbon skeleton. The glucose-derived chemical intermediates discussed in this review include polyols like sorbitol and sorbitan, diols like isosorbide, furanic compounds like 5-(hydroxymethyl)furfural, and carboxylic acids like gluconic acid. Recent advances in producing the intermediates mentioned above from glucose following chemocatalytic routes have been elaborated, and their derivative chemistry highlighted. This review aims to comprehensively understand the prospects and challenges associated with the catalytic synthesis of C6 molecules from glucose.

Insights into the interfacial effects in Cu-Co/CeOx catalysts on hydrogenolysis of 5-hydroxymethylfurfural to biofuel 2,5-dimethylfuran

The interface site between metal and support possess unique electronic and morphological structure, providing distinct active centers for favorable reaction in catalytic conversion of biomass derivatives to valuable chemicals. In this study, a series of Cu-Co/CeO_x catalysts were prepared for hydrogenolysis of 5-hydroxymethylfurfural (HMF) to 2,5-dimethylfuran (DMF) via reduction of the corresponding layered double hydroxide precursors. The characterizations indicated the formation of CoCe-Vö interface (Vö denotes oxygen vacancy) and the effect of hydrogen spillover from Cu species to CoCe-Vö interface. Furthermore, the experiments and theoretical calculations verified that CoCe-Vö interface could activate the CO bond. The optimized catalyst showed a DMF yield of > 90% at 180 °C and 1.5 MPa H₂ with no deactivation in the cycling tests. This study reveals the interfacial effects of the nanocatalysts, including the oxygen vacancies and hydrogen spillover, on hydrogenolysis of HMF, which provided a simple and efficient approach for synthesis of high-performance non-noble metal nanocatalysts applied to the hydrogenolysis of various biomass derivatives.

Crystal-phase engineering of PdCu nanoalloys facilitates selective hydrodeoxygenation at room temperature

Selective hydrodeoxygenation of biomass-derived aromatic alcohols to value-added chemical or fuel is of great importance for sustainable biomass upgrading, and hydrodeoxygenation of 5-hydroxymethylfurfural (HMF) to 2,5-dimethylfuran (DMF) is one of the most attractive reactions. Achieving the conversion of HMF to DMF using H₂ at ambient temperature is challenging. In this work, we used PdCu nanoalloys to catalyze the selective hydrodeoxygenation reaction of HMF to DMF using H₂ as the reducing agent. The reaction path and the product selectivity are governed by the crystallographic phase of the PdCu nanoalloys. It was discovered that body-centered cubic (BCC) PdCu nanoalloys supported on activated carbon (AC) exhibited outstanding performance with 93.6% yield of DMF at room temperature (PdCu/AC-BCC). A combination of experimental and density functional theory (DFT) studies showed that the tilted adsorption modes of furanic intermediates on PdCu-BCC nanoalloy surfaces accounted for the high selectivity of DMF; however, furan ring was activated on PdCu face-centered cubic (FCC) nanoalloy surfaces. Furthermore, PdCu/AC-BCC could also catalyze the hydrodeoxygenation of other aromatic alcohols at room temperature while maintaining the aromatic structures. This work opens the way for selective hydrodeoxygenation of the aromatic alcohols at room temperature with the aromatic ring intact.

In Situ Ruthenium Catalyst Modification for the Conversion of Furfural to 1,2-Pentanediol

Exploiting biomass to synthesise compounds that may replace fossil-based ones is of high interest in order to reduce dependence on non-renewable resources. 1,2-pentanediol and 1,5-pentanediol can be produced from furfural, furfuryl alcohol or tetrahydrofurfuryl alcohol following a metal catalysed hydrogenation/C-O cleavage procedure. Colloidal ruthenium nanoparticles stabilized with polyvinylpyrrolidone in situ modified with different organic compounds are able to produce 1,2-pentanediol directly from furfural in a 36% of selectivity at 125 °C under 20 bar of H₂ pressure.

Hydrogenation of furfural to furfuryl alcohol over MOF-derived Fe/Cu@C and Fe3O4/Cu@C catalysts

With Cu-MOF-loaded Fe(NO3)3 as the precursor (Fe(NO3)3/Cu-MOF), Fe/Cu@C and Fe3O4/Cu@C catalysts were prepared from heating under the H2 and N2 atmosphere, respectively. When Fe(NO3)3/Cu-MOF was heated under different atmospheres, Cu-MOF...

Continuous conversion of furfural to furfuryl alcohol by transfer hydrogenation catalyzed by copper deposited in a monolith reactor

A polymer monolith catalytic reactor, which is fabricated by anchoring –SO3H groups on the surface of the fibers and by depositing Cu species, exhibits outstanding performance and high stability in continuous transfer hydrogenation of furfural.

A new reduction method based on simultaneous Ti3AlC2 support etching and metal deposition to prepare Pt catalysts for aqueous-phase selective hydrogenation of furfural to furfuryl alcohol

The new catalysts Pt/Ti3AlxC2Ty developed by a novel reduction method outperformed reference catalysts made by deposition–precipitation in the selective hydrogenation of furfural to furfuryl alcohol.

Highly efficient Ni–NiO/carbon nanotubes catalysts for the selective transfer hydrogenation of 5-hydroxymethylfurfural to 2,5-bis(hydroxymethyl)furan

Ni–NiO/CNTs showed an excellent activity towards the catalytic transfer hydrogenation of 5-hydroxymethylfurfural to 2,5-bis(hydroxymethyl)furan.

Efficient Piancatelli rearrangement on a large scale using the Zippertex technology under subcritical water conditions

A series of furyl carbinols, which were directly obtained from a bio-sourced raw material, were efficiently transformed into cyclopentenone derivatives in good yields and on a large scale using the Zippertex technology under subcritical water conditions.

Pathway to fully-renewable biobased polyesters derived from HMF and phenols

Building on previous work where 5-hydroxymethylfurfural (HMF) was selectively functionalized by etherification with phenols, we demonstrated that the oxidized versions of these HMF ethers can be converted to functionalized δ-hexalactones...

Ruthenium nanoparticles canopied by heptagon-containing saddle-shaped nanographenes as efficient aromatic hydrogenation catalysts

Ruthenium nanoparticles stabilized with non-planar polycyclic aromatic hydrocarbons (PAHs) are active catalysts in the hydrogenation of aromatic substrates under mild conditions.

Excited-state cobaloxime catalysis enabled scalable oxidant-free dehydrogenative C–H phosphinoylation of undirected heterocycles

Visible-light-induced excited-state cobalt catalysis enables C(sp2)–H/C(sp3)–H phosphinoylation accompanied by H2 evolution. The reaction achieves the late-stage modification of more than 10 distinct classes of heterocycles and arenes.

Grass-like NixSey nanowire arrays shelled with NiFe LDH nanosheets as a 3D hierarchical core–shell electrocatalyst for efficient upgrading of biomass-derived 5-hydroxymethylfurfural and furfural

In situ synthesis of NixSey–NiFe LDH core–shell nanoarrays on nickel foam for electrochemical oxidation of 5-hydroxymethylfurfural and furfural.

Catalytic Transformation of Biomass-Derived Furfurals to Cyclopentanones and Their Derivatives: A Review

Furfural (FF) and 5-(hydroxymethyl)furfural (HMF) are well-recognized biomass-derived chemical building blocks with established applications and markets for several of their derivatives. Attaining a wide spectrum of petrochemicals is the primary target of a biorefinery that employs FF and HMF as the chemical feedstock. In this regard, cyclopentanone (CPN) is a crucial petrochemical intermediate used for synthesizing a diverse range of compounds with immense commercial prospects. The hydrogenative ring rearrangement of FF to CPN in an aqueous medium under catalytic hydrogenation conditions was first reported in 2012, whereas the first report on the catalytic conversion of HMF to 3-(hydroxymethyl)cyclopentanone (HCPN) was published in 2014. Over the past decade, several investigations have been undertaken in converting FF and HMF to CPN and HCPN, respectively. The research studies aimed to improve the scalability, selectivity, environmental footprint, and cost competitiveness of the process. A blend of theoretical and experimental studies has helped to develop efficient, inexpensive, and recyclable heterogeneous catalysts that work under mild reaction conditions while providing excellent yields of CPN and HCPN. The time is ripe to consolidate the data in this area of research and analyze them rigorously in a review article. This work will assist both beginners and experts of this field in acknowledging the accomplishments to date, recognize the challenges, and strategize the way forward.

Recyclable Zr/Hf-Containing Acid-Base Bifunctional Catalysts for Hydrogen Transfer Upgrading of Biofuranics: A Review

The massive burning of a large amount of fossil energy has caused a lot of serious environmental issues (e.g., air pollution and climate change), urging people to efficiently explore and valorize sustainable alternatives. Biomass is being deemed as the only organic carbon-containing renewable resource for the production of net-zero carbon emission fuels and fine chemicals. Regarding this, the selective transformation of high-oxygen biomass feedstocks by catalytic transfer hydrogenation (CTH) is a very promising strategy to realize the carbon cycle. Among them, the important Meerwein-Ponndorf-Verley (MPV) reaction is believed to be capable of replacing the traditional hydrogenation strategy which generally requires high-pressure H2 and precious metals, aiming to upgrade biomass into downstream biochemical products and fuels. Employing bifunctional heterogeneous catalysts with both acidic and basic sites is needed to catalyze the MPV reaction, which is the key point for domino/cascade reaction in one pot that can eliminate the relevant complicated separation/purification step. Zirconium (Zr) and hafnium (Hf), belonging to transition metals, rich in reserves, can demonstrate similar catalytic efficiency for MPV reaction as that of precious metals. This review introduced the application of recyclable heterogeneous non-noble Zr/Hf-containing catalysts with acid-base bifunctionality for CTH reaction using the safe liquid hydrogen donor. The corresponding catalysts were classified into different types including Zr/Hf-containing metal oxides, supported materials, zeolites, metal-organic frameworks, metal-organic hybrids, and their respective pros and cons were compared and discussed comprehensively. Emphasis was placed on evaluating the bifunctionality of catalytic material and the key role of the active site corresponding to the structure of the catalyst in the MPV reaction. Finally, a concise summary and prospect were also provided centering on the development and suggestion of Zr/Hf-containing acid-base bifunctional catalysts for CTH.

Hydrothermal pretreatment of lignocellulosic biomass for hemicellulose recovery

The hemicellulosic fraction recovery is of interest for integrated processes in biorefineries, considering the possibility of high economic value products produced from their structural compounds of this polysaccharide. However, to perform an efficient recovery, it is necessary to use biomass fractionation techniques, and hydrothermal pretreatment is highlighted as a valuable technique in the hemicellulose recovery by applying high temperatures and pressure, causing dissolution of the structure. Considering the possibility of this pretreatment technique for current approaches to hemicellulose recovery, this article aimed to explore the relevance of hydrothermal pretreatment techniques (sub and supercritical water) as a strategy for recovering the hemicellulosic fraction from lignocellulosic biomass. Discussions about potential products to be generated, current market profile, and perspectives and challenges of applying the technique are also addressed.

Metal Sulfide Photocatalysts for Lignocellulose Valorization

Transition metal sulfides are an extraordinarily vital class of semiconductors with a wide range of applications in the photocatalytic field. A great number of recent advances in photocatalytic transformations of lignocellulosic biomass, the largest renewable carbon resource, into high-quality fuels and value-added chemicals has been achieved over metal sulfide semiconductors. Herein, the progress and breakthroughs in metal-sulfide-based photocatalytic systems for lignocellulose valorization with an emphasis on selective depolymerization of lignin and oxidative coupling of some important bioplatforms are highligted. The key issues that control reaction pathways and mechanisms are carefully examined. The functions of metal sulfides in the elementary reactions, including CO-bond cleavage, selective oxidations, CC coupling, and CH activation, are discussed to offer insights to guide the rational design of active and selective photocatalysts for sustainable chemistry. The prospects of sulfide photocatalysts in biomass valorization are also analyzed and briefly discussed.

Catalytic Transfer Hydrogenation and Acid Reactions of Furfural and 5-(Hydroxymethyl)furfural over Hf-TUD-1 Type Catalysts

Heterogeneous catalysis, which has served well the petrochemical industry, may valuably contribute towards a bio-based economy by sustainably enabling selective reactions to renewable chemicals. Carbohydrate-containing matter may be obtained from various widespread sources and selectively converted to furanic platform chemicals: furfural (Fur) and 5-(hydroxymethyl)furfural (Hmf). Valuable bioproducts may be obtained from these aldehydes via catalytic transfer hydrogenation (CTH) using alcohols as H-donors under relatively moderate reaction conditions. Hafnium-containing TUD-1 type catalysts were the first of ordered mesoporous silicates explored for the conversion of Fur and Hmf via CTH/alcohol strategies. The materials promoted CTH and acid reactions leading to the furanic ethers. The bioproducts spectrum was broader for the reaction of Fur than of Hmf. A Fur reaction mechanism based on literature data was discussed and supported by kinetic modelling. The influence of the Hf loading and reaction conditions (catalyst load, type of alcohol H-donor, temperature, initial substrate concentration) on the reaction kinetics was studied. The reaction conditions were optimized to maximize the yields of 2-(alkoxymethyl)furan ethers formed from Fur; up to 63% yield was reached at 88% Fur conversion, 4 h/150 °C, using Hf-TUD-1(75), which was a stable catalyst. The Hf-TUD-1(x) catalysts promoted the selective conversion of Hmf to bis(2-alkoxymethyl)furan; e.g., 96% selectivity at 98% Hmf conversion, 3 h/170 °C for Hf-TUD-1(50).

Homogeneous Catalyzed Valorization of Furanics: A Sustainable Bridge to Fuels and Chemicals

The development of efficient biomass valorization is imperative for the future sustainable production of chemicals and fuels. Particularly, the last decade has witnessed the development of a plethora of effective and selective transformations of bio-based furanics using homogeneous organometallic catalysis under mild conditions. In this review, we describe some of the advances regarding the conversion of target furanics into value chemicals, monomers for high-performance polymers and materials, and pharmaceutical key intermediates using homogeneous catalysis. Finally, the incorporation of furanic skeletons into complex chemical architectures by multifunctionalization routes is also described.

Intermolecular Diels-Alder Cycloadditions of Furfural-Based Chemicals from Renewable Resources: A Focus on the Regio- and Diastereoselectivity in the Reaction with Alkenes

A recent strong trend toward green and sustainable chemistry has promoted the intensive use of renewable carbon sources for the production of polymers, biofuels, chemicals, monomers and other valuable products. The Diels-Alder reaction is of great importance in the chemistry of renewable resources and provides an atom-economic pathway for fine chemical synthesis and for the production of materials. The biobased furans furfural and 5-(hydroxymethyl)furfural, which can be easily obtained from the carbohydrate part of plant biomass, were recognized as "platform chemicals" that will help to replace the existing oil-based refining to biorefining. Diels-Alder cycloaddition of furanic dienes with various dienophiles represents the ideal example of a "green" process characterized by a 100% atom economy and a reasonable E-factor. In this review, we first summarize the literature data on the regio- and diastereoselectivity of intermolecular Diels-Alder reactions of furfural derivatives with alkenes with the aim of establishing the current progress in the efficient production of practically important low-molecular-weight products. The information provided here will be useful and relevant to scientists in many fields, including medical and pharmaceutical research, polymer development and materials science.

Photocatalytic H2 Evolution Coupled with Furfuralcohol Oxidation over Pt-Modified ZnCdS Solid Solution

Coupling photocatalytic H₂ production with organic synthesis attracts immense interest in the energy and chemical engineering field for the low-cost, clean, and sustainable generation of green energy and value-added products. Nevertheless, the performance of current photocatalysts is greatly limited by grievous charge recombination and tardy H₂ evolution. To tackle these issues, a Pt nanocluster-modified ZnCdS solid solution is fabricated for photocatalytic H₂ production and selective furfuralcohol oxidation. The internal electric field inside the ZnCdS and Schottky junction between ZnCdS and Pt nanoclusters drastically ameliorate charge separation. Meanwhile, the Pt nanoclusters remarkably expedite the H₂ evolution kinetics on ZnCdS. As a result, the H₂ production rate over Pt-loaded ZnCdS reaches 1045 µmol g^-1 h^-1 , which is about 26- and 70-fold that of CdS and ZnS, respectively. Under light irradiation for 3 h, the conversion of furfuralcohol to furfural reaches 71% with 89% furfural selectivity. The photocatalytic mechanism is investigated by in situ characterizations and theoretical calculations.

In situ growth of MOFs on Ni(OH)2 for efficient electrocatalytic oxidation of 5-hydroxymethylfurfural

A Ni-based MOF is in situ grown onto Ni(OH)₂ nanosheets to effectively suppress the oxygen evolution reaction for the efficient electrocatalytic oxidation of biomass-derived 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid with 100% yield and faradaic efficiency at 1.4 V (vs. RHE).

Recent advances in decarbonylative annulation reactions

In recent years, decarbonylative annulation reactions have emerged as one of the most efficient routes to construct a variety of important carbocyclic and heterocyclic scaffolds. The main advantages of this type of reaction are, first, the carbonyl compounds are used as the starting materials which are abundant in nature and second, the major by-product of this reaction is carbon monoxide. In the last two decades, various intramolecular and intermolecular decarbonylative annulation reactions have been performed using carbonyl compounds and alkenes/alkynes/arenes/isocyanates etc. as the annulation partners. These reactions are typically performed either in the presence of or in the absence of a metal catalyst. However, these reactions are still in their infancy as a very little progress has been achieved in these reactions. Through this review article, it is attempted to highlight the recent developments on various decarbonylative annulation reactions which ultimately lead to the formation of important structural moieties.

Highly Dispersed CoNi Alloy Embedded in N-doped Graphitic Carbon for Catalytic Transfer Hydrogenation of Biomass-derived Furfural

The development of efficient, stable, and cost-effective heterogeneous catalysts for catalytic transfer hydrogenation (CTH) of biomass-derived furfural (FAL) is highly desired. Herein, series of N-doped graphitic carbon embedded CoNi bimetallic alloy nanoparticles were fabricated and used for the CTH of FAL to value-added furfuryl alcohol (FOL) with renewable isopropanol as hydrogen donor. Intrinsic catalytic activity examination indicated the catalytic performance of Ni_x Co_y @NGC (x:y=1 : 3, 1 : 1, 3 : 1) nanocatalysts were sensitive to their chemical compositions. The optimal Ni₁ Co₁ @NGC nanocatalyst with Ni/Co mole ratio of 1 : 1 afforded a largest FOL yield of 89.3% with nearly full conversion of FAL. The synergistic effect enabled by bimetallic alloys and the abundant N-based Lewis base sites and surface Co-N active species were revealed based on systematic structural characterization, responsible for the excellent catalytic efficiency of bimetallic Ni₁ Co₁ @NGC nanocatalyst for CTH of FAL.

Emerging heterogeneous catalysts for biomass conversion: studies of the reaction mechanism

The development of efficient catalysts to break down and convert woody biomass will be a paradigm shift in delivering the global target of sustainable economy and environment via the use of cheap, highly abundant, and renewable carbon resources. However, such development is extremely challenging due to the complexity of lignocellulose, and today most biomass is treated simply as waste. The solution lies in the design of multifunctional catalysts that can place effective control on substrate activation and product selectivity. This is, however, severely hindered by the lack of fundamental understanding of (i) the precise role of active sites, and (ii) the catalyst-substrate chemistry that underpins the catalytic activity. Moreover, active sites alone often cannot deliver the desired selectivity of products, and full understanding of the microenvironment of the active sites is urgently needed. Here, we review key recent advances in the study of reaction mechanisms of biomass conversion over emerging heterogeneous catalysts. These insights will inform the design of future catalytic systems showing improved activity and selectivity.

The Use of CO2 in the Production of Bioplastics for an Even Greener Chemistry

The high life expectancy of the world population provokes increase in demand for food and energy. As a result, the intense industrialization and the application of fossil sources is responsible for high levels of CO2 emission and waste generation. To mitigate the CO2 emission a practical solution at the very short term is urgently needed. The capture of CO2 and its application in chemical processes for the valorization of residual biomass are of great importance nowadays. The application of CO2 in the selective carboxylation of furoic acid for the production of 2,5-furandicarboxylic acid (FDCA), a bio-based monomer, has been an important step towards obtaining biopolymers to replace petroleum-based plastics such as polyethylene terephthalate (PET). In this project report, we discuss on the current challenges for obtaining the 2,5-FDCA precursor from the furfural in two main routes involving oxidation and carboxylation via heterogeneous catalysis. We present the main objectives and discuss the importance of this research for the development of more sustainable processes.