Catalytic Applications of Vanadium: A Mechanistic Perspective

Novel Technology for Vanadium and Chromium Extraction with KMnO4 in an Alkaline Medium

This paper focused on the oxidation-alkaline extraction process of vanadium-chromium-reducing residue. The affected parameters including reaction temperature, KMnO₄ dosage, reaction time, NaOH dosage, and liquid-to-solid ratio on the extraction process were investigated. The E-pH diagram and the thermodynamic analysis indicated that KMnO₄ was suitable for the oxidation of low-valence vanadium and chromium. Vanadium (97.24%) and chromium (56.20%) were extracted under the following optimal reaction conditions: reaction temperature of 90 °C, reaction time of 90 min, dosage of KMnO₄ at m(KMnO₄)/m(residue) = 0.40, dosage of NaOH at m(NaOH)/m(residue) = 0.30, and liquid-to-solid ratio at 5:1 mL/g. The extraction process of vanadium was controlled by the reactant through the solid product layer and the extraction kinetics behavior fitted well with the shrink core model with an E _a of 15.37 kJ/mol. At the same time, the surface chemical reaction was the controlling step for chromium extraction, which was difficult with an E _a of 39.78 kJ/mol.

Mesoionic Carbenes in Low- to High-Valent Vanadium Chemistry

We report the synthesis of vanadium(V) oxo complex 1 with a pincer-type dianionic mesoionic carbene (MIC) ligand L1 and the general formula [VOCl(L1)]. A comparison of the structural (SC-XRD), electronic (UV-vis), and electrochemical (cyclic voltammetry) properties of 1 with the benzimidazolinylidene congener 2 (general formula [VOCl(L2)]) shows that the MIC is a stronger donor also for early transition metals with low d-electron population. Since electrochemical studies revealed both complexes to be reversibly reduced, the stronger donor character of MICs was not only demonstrated for the vanadium(V) but also for the vanadium(IV) oxidation state by isolating the reduced vanadium(IV) complexes [Co(Cp*)2][1] and [Co(Cp*)2][2] ([Co(Cp*)2] = decamethylcobaltocenium). The electronic structures of the compounds were investigated by computational methods. Complex 1 was found to be a moderate precursor for salt metathesis reactions, showing selective reactivity toward phenolates or secondary amides, but not toward primary amides and phosphides, thiophenols, or aryls/alkyls donors. Deoxygenation with electron-rich phosphines failed to give the desired vanadium(III) complex. However, treatment of the deprotonated ligand precursor with vanadium(III) trichloride resulted in the clean formation of the corresponding MIC vanadium(III) complex 6, which undergoes a clean two-electron oxidation with organic azides yielding the corresponding imido complexes. The reaction with TMS-N3 did not afford a nitrido complex, but instead the imido complex 10. This study reveals that, contrary to popular belief, MICs are capable of supporting early transition-metal complexes in a variety of oxidation states, thus making them promising candidates for the activation of small molecules and redox catalysis.

Investigation of vanadia-alumina catalysts with solid-state NMR spectroscopy and DFT

In this work, isolated surface sites of vanadium oxide on the alumina surface were modeled and compared to experimental data obtained with ⁵¹V Solid-State Nuclear Magnetic Resonance (SSNMR) spectroscopy. The geometry of the centers on the (100), (110), and (111) planes of the spinel structure and (010) monoclinic alumina was modeled using density functional theory (DFT); their ⁵¹V NMR parameters were calculated using the Gauge-Including Projector Augmented Wave (GIPAW) method. The comparison of the simulated theoretical spectra with the experimental ones made it possible to find the sites that are likely present on the surface of real catalysts. The minimum energy pathways of propane oxidative dehydrogenation to propene were calculated for the dioxovanadium site in order to estimate its activity.

On the application of 3d metals for C-H activation toward bioactive compounds: The key step for the synthesis of silver bullets

Several valuable biologically active molecules can be obtained through C-H activation processes. However, the use of expensive and not readily accessible catalysts complicates the process of pharmacological application of these compounds. A plausible way to overcome this issue is developing and using cheaper, more accessible, and equally effective catalysts. First-row transition (3d) metals have shown to be important catalysts in this matter. This review summarizes the use of 3d metal catalysts in C-H activation processes to obtain potentially (or proved) biologically active compounds.

Three Polyoxovanadates-Based Organic-Inorganic Hybrids: Structural Variation, Bifunctional Electrocatalytic Activities, and Computational Studies

Three bimetallic organic-inorganic hybrids based on the [V₂O₆]^2- building unit, [Cu(pty)(V₂O₆)]·H₂O (1), [Cu(pty)(V₂O₆)] (2), [Cu(tpy)(V₂O₆)] (3), (pty = 4'-(4″-pyridyl)-2,2':6',2″-terpyridine, tpy = 2,2':6',2″-terpyridine), were synthesized via a one-pot method. Hybrid 1 has a 1D straight chain architecture with [V₂O₆]^2- clusters and Cu-pty complexes; hybrids 2 and 3 possess a 2D sheet structure including 10-membered rings assembled from four [Cu(pty)]²⁺ motifs and six [V₂O₆]^2- clusters in 2, and two [Cu(tpy)]²⁺ units and eight [V₂O₆]^2- clusters in 3. Noteworthy, hybrids 1-3 can be employed as bifunctional electrocatalysts for electroreduction of nitrite and electrooxidation of ascorbic acid. Additionally, theoretical calculations including the molecular electrostatic potential and the frontier molecular orbital were performed to estimate the electronic structure of hybrids 1-3. The natural bond orbital analysis was also calculated to interpret the electron charge distribution.

Role of Organic Fluoride Salts in Stabilizing Niobium Oxo-Clusters Catalyzing Epoxidation

We present here that easily available organic salts can stabilize/modify niobium (Nb) oxo-clusters. The as-synthesized Nb oxo-clusters have been characterized by various methods. These Nb oxo-clusters were catalytically active for the epoxidation of allylic alcohols and olefins with H₂O₂ as an oxidant. Notably, Nb-OC@TBAF-0.5 appeared as highly dispersed nanosized particles and showed the highest catalytic activity, which can be attributed to the following reasons on the basis of characterization. First, the strong coordination of fluorine ions with Nb sites and the steric protection with bulky organic cations led to high stabilization and dispersion of the oxo-clusters in the course of the reaction. Second, a hydrogen-bond interaction between the coordinated fluorine atom and the -OH group of allylic alcohol favored the epoxidation reaction. Third, the electron density of Nb sites decreased due to the strong electron-withdrawing ability of F^- adjacent to Nb sites, thus promoting the electrophilic oxygen transfer to the C═C bond.

Vanadium-doped sodium phosphomolybdate salts as catalysts in the terpene alcohols oxidation with hydrogen peroxide

In this work, we have explored the catalytic activity of Keggin-type heteropolyanions PMo_12−nV_nO₄₀⁽³⁺ⁿ⁾⁻ (n = 0, 1, 2, or 3) in the form of sodium salts in green oxidation routes of terpene alcohols with hydrogen peroxide. Nerol was the model molecule selected to assess the impacts of the main reaction parameters, such as temperature, catalyst load, and stoichiometry of reactants. The impacts of the presence of vanadium at different proportions (i.e., V₁, V₂, and V₃ loads/per anion) in the structure of phosphomolybdate catalysts were assessed. All the catalysts were characterized by various techniques such as powder X-ray diffraction, attenuated diffuse reflectance infrared spectroscopy, ultraviolet-visible spectroscopy, thermogravimetric analysis, isotherms of adsorption–desorption of N₂ measurements of surface area, scanning electronic microscopy, energy-dispersive X-ray spectroscopy, and n-butylamine potentiometric titration. Among the catalysts assessed, Na₄PMo₁₁VO₄₀ was the most active and selective toward epoxides. The efficiency of this catalyst in the epoxidation of different terpene alcohols was investigated. Special attention was dedicated to correlating the composition and properties of the vanadium-doped phosphomolybdic catalysts with their catalytic activity.

In this work, we have explored the catalytic activity of Keggin-type heteropolyanions PMo_12−nV_nO₄₀⁽³⁺ⁿ⁾⁻ (n = 0, 1, 2, or 3) in the form of sodium salts in green oxidation routes of terpene alcohols with hydrogen peroxide.

Organo-functionalized polyoxovanadates: crystal architecture and property aspects

Polyoxovanadates (POVs), as one of the most prominent members of polyoxometalates (POMs), have been subject to extensive studies by virtue of their aesthetically intriguing structures and potential applications in catalysis, magnetism, and optics, among others. In recent years, organo-functionalized POVs have received considerable attention due to the combination of the advantages of POVs with the importance of organic species. In this review, the key developments of polyoxovanadates and, particularly, the achievements that are related to polyoxovanadates modified with organic ligands and transition metal-organic ligand are summarized. Herein, we systematically introduce the structural features of organo-functionalized POVs and their main applications involved in the magnetism and catalysis aspects. Finally, the current challenges and future prospects in the design, synthesis, and property investigation of polyoxovanadates are also discussed.

Oxido- and Dioxido-Vanadium(V) Complexes Supported on Carbon Materials: Reusable Catalysts for the Oxidation of Cyclohexane

Oxidovanadium(V) and dioxidovanadium(V) compounds, [VO(OEt)L] (1) and [Et3NH][VO2L] (2), were synthesized using an aroylhydrazone Schiff base (5-bromo-2-hydroxybenzylidene)-2-hydroxybenzohydrazide (H2L). They were characterized by elemental analysis, Fourier-transform infrared spectroscopy (FT-IR), (1H and 51V) nuclear magnetic resonance (NMR), electrospray ionization mass spectrometry (ESI-MS) and single crystal X-ray diffraction analyses. Both complexes were immobilized on functionalized carbon nanotubes and activated carbon. The catalytic performances of 1 and 2, homogenous and anchored on the supports, were evaluated for the first time towards the MW-assisted peroxidative oxidation (with tert-butylhydroperoxide, TBHP) of cyclohexane under heterogeneous conditions. The immobilization of 1 and 2 on functionalized carbon materials improved the efficiency of catalytic oxidation and allowed the catalyst recyclability with a well-preserved catalytic activity.

Enhancing Hydrodeoxygenation of Bio-oil via Bimetallic Ni-V Catalysts Modified by Cross-Surface Migrated-Carbon from Biochar

Aromatics from selective hydrodeoxygenation (HDO) of biomass-derived bio-oil are an ideal feedstock for replacing industrial fossil products. In this study, biochar-modified Hβ/Ni-V catalysts were prepared and tested in the atmospheric HDO of guaiacol and bio-oil to produce aromatics. Compared with unmodified Hβ/Ni-V, higher HDO activity was achieved in catalysts with all kinds of biochar modifications. Especially, the pine nut shell biochar (PB)-modified PB-Hβ-8/Ni-V showed the highest selectivity to aromatics (69.17%), mainly including benzene and toluene. Besides, under the conditions of 380 °C and weight hourly space velocity (WHSV) of 0.5 h^-1, the cleavage of C_Ar-OH (C_Ar means the carbon in the benzene ring) was promoted to form more aromatics. Moreover, great recyclability (58.77% aromatics for the reactivated run-3 test) and efficient HDO of bio-oil (44.9% aromatic yield) were also achieved. Based on the characterization results, the enhanced aromatic selectivity of PB-Hβ-8/Ni-V was attributed to the synergetic effect between PB and Hβ/Ni-V. In detail, a stable surface migrated-carbon layer was formed on Hβ/Ni-V via the metal catalytic chemical vapor deposition (CVD) process of the pyrolysis PB volatiles. Simultaneously, a carbothermal reduction driven by the migrated-carbon took place to decorate the surface metals, obtaining more Ni⁰ and V³⁺ active sites. With this synergism, increased Ni⁰ sites promoted H₂ adsorption and dissociation, which improved the hydrogenation activity. Furthermore, the higher affinity of the reactant and increased oxygen vacancies both contributed to enhancing the selective surface adsorption of oxygenous groups and the cleavage of the C_Ar-OH bond, thus improving the deoxygenation activity. Therefore, the HDO activity was improved to form more target aromatics over biochar-modified catalysts. This work highlighted a potential avenue to develop economic and environmental catalysts for the upgrading of bio-oil.

Investigation of Solid Deposit Inside L-Type Urea Injector and NOx Conversion in a Heavy-Duty Diesel Engine

The heavy-duty diesel engine is used in the main transportation vehicles in Korea to deliver products from various companies; however, diesel engines produce enormous quantities of nitrogen oxide (NOx), which harms human health. The selective catalytic reduction (SCR) system is a common solution to reduce NOx emissions from diesel engines; however, heavy-duty diesel engines produce more NOx than can be dealt with using an SCR and thus require investigations into effective NOx reduction solutions. This study investigated 12,000 cc heavy-duty diesel engines from Hyundai using the 1000 rpm engine operation to produce 1330 ppm of NOx emission. The ammonia generation process was assessed by the amount of ammonia produced; the amount of ammonia gas was identified by 19 gas sensors on the catalyst surface; the effectiveness of the mixing process between the ammonia and the NOx in the system was determined by the NOx conversion values from a gas analyzer. Comparison between the experiment and simulation results shows the ammonia and NOx values and elucidates the temperature results for vaporization and saturation quantity, ammonia distribution, and NOx conversion in the system. The NOx conversion investigations also provide the chemical reaction and numerical equation relevant to the ammonia and NOx distribution.

Surfaces of VO2 -Polymorphs: Structure, Stability and the Effect of Doping

Vanadium dioxide is an interesting and frequently applied material due to its metal‐insulator phase transition. However, there are only few studies of the catalytic activity and surface properties of different VO₂ polymorphs. Therefore, we investigated the properties of the surfaces of the most stable VO₂ phases theoretically at density‐functional theory level using a self‐consistent hybrid functional which has demonstrated its accuracy for the prediction of structural, electronic and energetic properties in a previous study. We found that the surfaces of the rutile R phase of VO₂ are not stable and show a spontaneous phase transition to the monoclinic M₁ phase. Doping with Mo stabilizes the surfaces with rutile structure even for small dopant concentrations (6.25 %). Both M₁ and R surfaces strongly relax, with and without doping. In particular the metal‐metal distances in the uppermost layers change by up to 0.4 Å. Mo segregates in the topmost layer of both R and M₁ phases. The electronic structure is only slightly changed upon doping.

Photo-initiated oxidation of C-H bonds by diimine complexes of vanadium(V)

The photochemical activation of carbon-hydrogen bonds by vanadium(v)-dioxo and vanadium(v)-oxo-peroxo diimine complexes is described. Reactions were carried out using a selection of organic substrates with C-H bond dissociation free energy values between 70 and 97 kcal mol-1. The ability to activate C-H bonds using vanadium(v)-dioxo and vanadium(v)-oxo-peroxo diimine complexes varies with different bond dissociation free energy. Compounds with weaker C-H bonds are oxidized in minutes, rather than in days for thermal oxidations by the corresponding complexes. Dioxygen is necessary for substrate consumption, which suggests that the electronically excited V complexes are radical reaction initiators via H-atom abstraction from the organic substrate.

Oxidative α-C-C Bond Cleavage of 2° and 3° Alcohols to Aromatic Acids with O2 at Room Temperature via Iron Photocatalysis

The selective α-C-C bond cleavage of unfunctionalized secondary (2°) and tertiary alcohols (3°) is essential for valorization of macromolecules and biopolymers. We developed a blue-light-driven iron catalysis for aerobic oxidation of 2° and 3° alcohols to acids via α-C-C bond cleavages at room temperature. The first example of oxygenation of the simple tertiary alcohols was reported. The iron catalyst and blue light play critical roles to enable the formation of highly reactive O radicals from alcohols and the consequent two α-C-C bond cleavages.

Recyclable Oxofluorovanadate-Catalyzed Formylation of Amines by Reductive Functionalization of CO2 with Hydrosilanes

An efficient method has been developed for the reductive amination of CO₂ by using readily available and recyclable oxofluorovanadates as catalysts. Various amines are transformed into the desired N-formylated products in moderate to excellent yields at room temperature in the presence of phenylsilane. Mechanistic studies based on in situ infrared spectroscopy suggest a reaction pathway initiated through F-Si interactions. The activated phenylsilane allows for CO₂ insertion to produce phenylsilyl formate, which undergoes attack by the amine to generate the target product.

Synthesis of naked vanadium pentoxide nanoparticles

Vanadium pentoxide is the most important vanadium compound by being the precursor to most vanadium alloys. It also plays an essential role in the production of sulfuric acid as well as in metal-ion batteries and supercapacitors. In this paper, pulsed laser ablation in liquids is used to synthesize "naked" vanadium pentoxide nanostructures. The resulting particles take up "nearly-spherical" and "flower-like" morphologies, composed of α-V₂O₅ and β-V₂O₅ crystalline phases. Even "naked", the nanostructures are stable in time with a zeta potential of -51 ± 7 mV. In order to maximize the production of vanadium pentoxide nanostructure, the optimal repetition rate was determined to be @ ∼6600 Hz when irradiating a pure vanadium target in DI-water. This corresponds to a cavitation bubble lifetime of around ∼0.15 ms. At that repetition rate, the production reached ∼10 ppm per minute of irradiation. Finally, from the characterization of the α-V₂O₅ and β-V₂O₅ nanostructures, the surface energy of each phase has been carefully determined at 0.308 and 1.483 J cm^-2, respectively. Consequently, the β-phase was found to display a surface energy very close to platinum. The exciton Bohr radius has been determined at 3.5 ± 0.7 nm and 2.0 ± 0.6 nm for α-V₂O₅ and β-V₂O₅ phases, respectively.

A benzene-bridged divanadium complex-early transition metal catalyst for alkene alkylarylation with PhI(O2CR)2via decarboxylation

The synthesis, structure and catalytic activity of a benzene-bridged divanadium complex were comprehensively studied. The reduction of (Nacnac)VCl2 (1) (Nacnac = (2,6-iPr2C6H3NCMe)2HC) supported by β-diketiminate with potassium graphite (KC8) by employing benzene as the solvent allows access to the benzene-bridged inverted-sandwich divanadium complex (μ-η6:η6-C6H6)[V(Nacnac)]2 (2a), which can catalyze alkene alkylarylation with hypervalent iodine(iii) reagents (HIRs) via decarboxylation to generate regioselectively diverse indolinones. Furthermore, the mild nature of this reaction was amenable to a wide range of functionalities on alkenes and HIRs. Mechanistic studies revealed a relay sequence of decarboxylative radical alkylation/radical arylation/oxidative re-aromatization.

Anti-oxidant and hepatoprotective effects of Salvia officinalis essential oil against vanadium-induced oxidative stress and histological changes in the rat liver

The present study was designed to evaluate the protective effects of Salvia officinalis essential oil (SOEO) against vanadium-induced hepatotoxicity in Wistar rats. Animals were divided into three groups: the first group served as the control (C), where rats received daily 0.5 mL of saline solution (0.9%) given by intraperitoneal (i.p.) way. Rats in the second group (V) received daily by i.p. way 5 mg/kg BW of NH₄VO₃ (V). Rats in the third group (SV) received daily V (5 mg/kg BW) by i.p. way and SOEO (15 mg/kg BW) by gavage. Animals were sacrificed after 4 or 10 days of treatment. Administration of V increased plasma ALT, AST, ALP, and LDH activities, and cholesterol, bilirubin, triglyceride, and NO levels in rats and reduced anti-oxidant enzyme activities in the liver. Treatment with SOEO significantly attenuated these changes. Moreover, the histopathological changes and the overexpression of Hsp72/73 proteins induced by V were significantly improved by SOEO. Therefore, our results suggested that SOEO could protect against V-induced oxidative damage in rat livers. The hepatoprotective effect of SOEO might be attributed to its modulation of detoxification enzymes and/or to its anti-oxidant and free radical scavenging effects.

Vanadium Cluster Neutrals Reacting with Water: Superatomic Features and Hydrogen Evolution in a Fishing Mode

Hydrogen evolution reaction (HER) is known as the heart of various energy storage and conversation systems of renewable energy sources. Here we observe the cluster reactions of a light transition metal, vanadium, with water in a gas-phase flow tube reactor. While HER products of V₁ and V₂ were not observed, the effective HER of water on neutral V_n (n ≥ 3) clusters reveals reasonable and size-dependent reactivity of the vanadium clusters. Superatomic features and reaction dynamics of V₁₀, V₁₃, and V₁₆ are highlighted. Among the three typical superatoms, V₁₀ and V₁₆ exhibit an abnormal superatomic orbital energy level order, 1S|2S|1P|1D..., where the energy-reduced 2S orbital helps to accommodate the geometric structure and hence reinforce the cluster stability. In comparison, V₁₃ bears a less symmetrical structure and reacts readily with water, allowing for recombination of a hydroxyl atom with an adsorbed hydrogen atom, akin to a fishing-mode HER process. The joint experimental and theoretical study on neutral V_n clusters clarifies the availability of superatom chemistry for transition metals and appeals further development of cluster theory based on electronic cloud/orbital analysis instead of simply counting the valence electrons. Also, we provide insights into the HER mechanism of metal clusters and propose a strategy to design new materials for portable fuel cells of hydrogen energy.

Sustainable Highly Selective Toluene Oxidation to Benzaldehyde

Thanks to the well-recognized role of benzaldehyde in industry, nowadays the research of new and sustainable approaches to selectively synthesize such an interesting product is receiving great attention from the chemists’ community. In this paper, a V-based catalytic biphasic system is adopted to perform toluene oxidation to benzaldehyde. Importantly, to pursue sustainability, organic solvents have been avoided, so toluene is used as substrate and co-solvent, together with water. Also, the use of hydrophobic ionic liquids has been explored. To perform oxidation, NH4VO3 catalyst, H2O2, and a safe and inexpensive co-catalyst are used. Among the tested co-catalysts, KF and O2 were found to be the best choice, to guarantee good yields, in mild reaction conditions. In fact, with such a sustainable method, up to 30% of benzaldehyde can be obtained at 60 °C and, more interestingly, the oxidative system can be recharged, raising-up the yield. The entire process results highly selective, since no traces of benzyl alcohol or benzoic acid are detected. Hence, it constitutes a very appealing synthetic route, even suitable to be easily scaled-up at an industrial level.

Binary and Ternary Vanadium Oxides: General Overview, Physical Properties, and Photochemical Processes for Environmental Applications

This review article is a comprehensive report on vanadium oxides which are interesting materials for environmental applications. Therefore, a general overview of vanadium and its related oxides are presented in the first two parts. Afterwards, the physical properties of binary and ternary vanadium oxides in single and mixed valence states are described such as their structural, optical, and electronic properties. Finally, the use of these vanadium oxides in photochemical processes for environmental applications is detailed, especially for the production of hydrogen by water splitting and the degradation of organic pollutants in water using photocatalytic and photo-Fenton processes. The scientific aim of such a review is to bring a comprehensive tool to understand the photochemical processes triggered by vanadium oxide based materials where the photo-induced properties are thoroughly discussed based on the detailed description of their intrinsic properties.

An oxygen-passivated vanadium cluster [V@V10O15]− with metal–metal coordination produced by reacting Vn− with O2

An oxygen-passivated vanadium cluster [V@V₁₀O₁₅]⁻ is reported by reacting V_n⁻ with O₂, giving rise to superatom features of metal–metal coordination and 3D aromaticity.

Tantalum(v) peroxido complexes as phosphatase inhibitors: a comparative study vis-a-vis peroxidovanadates

Peroxido Ta(v) complexes are found to be more effective as inhibitors of wheat thylakoid acid phosphatase vis-à-vis their V containing analogues. In addition, these compounds showed unique resistance towards degradation in the presence of catalase.

Monomeric vanadium oxide: a very efficient species for promoting aerobic oxidative dehydrogenation of N-heterocycles

The isolated monomeric VO₄ species, controlled by natural ligand tartaric acid, in the VO_x/NbO_y@C catalysts exhibited excellent performances and good recyclability in the dehydrogenation of N-heterocycles.

Vanadoborates: cluster-based architectures, preparation and properties

The different connections of [VO_x] (x = 4, 5, 6) and [AO_x] (A = B, x = 3, 4; A = P, x = 4) polyhedral units ultimately result in a fascinating variety of vanadoborate anionic clusters.

Chemo- and regioselective cross-dehydrogenative coupling reaction of 3-hydroxycarbazoles with arenols catalyzed by a mesoporous silica-supported oxovanadium

Cross-dehydrogenative coupling between 3-hydroxycarbazoles and 2-naphthols has been achieved by using a mesoporous silica-supported oxovanadium catalyst.

Cross-dehydrogenative coupling between 3-hydroxycarbazoles and 2-naphthols has been achieved by using a mesoporous silica-supported oxovanadium catalyst.

Integrated experimental/computational approaches to characterize the systems formed by vanadium with proteins and enzymes

An integrated instrumental/computational approach to characterize metallodrug–protein adducts at the molecular level is reviewed. A series of applications are described, focusing on potential vanadium drugs with a generalization to other metals.

Current status and perspectives in oxidative, non-oxidative and CO2-mediated dehydrogenation of propane and isobutane over metal oxide catalysts

Conversion of propane or isobutane from natural/shale gas into propene or isobutene, which are indispensable for the synthesis of commodity chemicals, is an important environmentally friendly alternative to oil-based cracking processes.

Chemo- and enantioselective hetero-coupling of hydroxycarbazoles catalyzed by a chiral vanadium(v) complex

The catalytic enantioselective oxidative hetero-coupling of arenols using a chiral vanadium(v) complex has been developed.

Predicting Bond Dissociation Energies and Bond Lengths of Coordinatively Unsaturated Vanadium-Ligand Bonds

Understanding the electronic structure of coordinatively unsaturated transition-metal compounds and predicting their physical properties are of great importance for catalyst design. Bond dissociation energy D_e and bond length r_e are two of the fundamental quantities for which good predictions are important for a successful design strategy. In the present work, recent experimentally measured bond energies and bond lengths of VX diatomic molecules (X = C, N, S) are used as a gauge to consider the utility of a number of electronic structure methods. Single-reference methods are one focus because of their efficiency and utility in practical calculations, and multireference configuration interaction (MRCISD) methods and a composite coupled cluster (CCC) method are a second focus because of their potential high accuracy. The comparison is especially challenging because of the large multireference M diagnostics of these molecules, in the range 0.15-0.19. For the single-reference methods, Kohn-Sham density functional theory (KS-DFT) has been tested with a variety of approximate exchange-correlation functionals. Of these, MOHLYP provides the bond dissociation energies in best agreement with experiments, and BLYP provides the bond lengths that are in best agreement with experiments; but by requiring good performance for both the D_e and r_e of the vanadium compounds, MOHLYP, MN12-L, MGGA_MS1, MGGA_MS0, O3LYP, and M06-L are the most highly recommended functionals. The CCC calculations include up to connected pentuple excitations for the valence electrons and up to connected quadruple excitations for the core-valence terms; this results in highly accurate dissociation energies and good bond lengths. Averaged over the three molecules, the mean unsigned deviation of CCC bond energies from experimental ones is only 0.4 kcal/mol, demonstrating excellent convergence of theory and experiments.

Structural and Thermal Properties of Ethylene-Norbornene Copolymers Obtained Using Vanadium Homogeneous and SIL Catalysts

The series of ethylene-norbornene (E-NB) copolymers was obtained using different vanadium homogeneous and supported ionic liquid (SIL) catalyst systems. The ¹³C and ¹H NMR (carbon and proton nuclear magnetic resonance spectroscopy) together with differential scanning calorimetry (DSC) were applied to determine the composition of copolymers such as comonomer incorporation (C_NB), monomer dispersity (MD), monomer reactivity ratio (r_e), sequence length of ethylene (l_e) and tetrad microblock distributions. The relation between the type of catalyst, reaction conditions and on the other hand, the copolymer microstructure, chain termination reaction analyzed by the type of unsaturation are discussed. In addition, the thermal properties of E-NB copolymers such as the melting and crystallization behavior, like also the heterogeneity of composition described by successive the self-nucleation and annealing (SSA) and the dispersity index (DI) were determined.

Comparison of Catalytic Properties of Vanadium Centers Introduced into BEA Zeolite and Present on (010) V2O5 Surface–DFT Studies

Vanadium-based catalysts, in which vanadium is present either as bulk V2O5 or as isolated species, are active in numerous oxidation reactions. In the present study, vanadium speciation and the possibility of its introduction in various forms (V=O, V–OH, V(=O)(–OH)) into the structurally different crystallographic positions in BEA zeolite was considered by means of Density Functional Theory (DFT). Out of nine nonequivalent positions, T2 and T3 positions are the most preferred. The former may accommodate V=O or V–OH, the latter V–OH or V(=O)(–OH). The structural and electronic properties of all possible centers present in the BEA zeolite are then compared with the characteristics of the same species on the most abundant (010) V2O5 surface. It is demonstrated that they exhibit higher nucleophilic character when introduced into the zeolite, and thus, may be more relevant for catalysis.