Nanoscale Nucleation and Growth of Electrodeposited Lithium Metal

Unlocking Liquid Sulfur Chemistry for Fast-Charging Lithium-Sulfur Batteries

A recent study of liquid sulfur produced in an electrochemical cell has prompted further investigation into regulating Li-S oxidation chemistry. In this research, we examined the liquid-to-solid sulfur transition dynamics by visually observing the electrochemical generation of sulfur on a graphene-based substrate. We investigated the charging of polysulfides at various current densities and discovered a quantitative correlation between the size and number density of liquid sulfur droplets and the applied current. However, the areal capacities exhibited less sensitivity. This observation offers valuable insights for designing fast-charging sulfur cathodes. By incorporating liquid sulfur into Li-S batteries with a high sulfur loading of 4.2 mg cm-2, the capacity retention can reach ∼100%, even when increasing the rate from 0.1 to 3 C. This study contributes to a better understanding of the kinetics involved in the liquid-solid sulfur growth in Li-S chemistry and presents viable strategies for optimizing fast-charging operations.

High Rate and Low-Temperature Stable Lithium Metal Batteries Enabled by Lithiophilic 3D Cu-CuSn Porous Framework

Lithium (Li) metal is regarded as the "Holy Grail" of anodes for high-energy rechargeable lithium batteries by virtue of its ultrahigh theoretical specific capacity and the lowest redox potential. However, the Li dendrite impedes the practical application of Li metal anodes. Herein, lithiophilic three-dimensional Cu-CuSn porous framework (3D Cu-CuSn) was fabricated by a vapor phase dealloying strategy via the difference in saturated vapor pressure between different metals and the Kirkendall effect. CuSn alloy sites were converted into LiSn alloy sites through the molten Li infusion method, and composite Li metal anodes (3D Cu-LiSn-Li) are achieved. Alloyed tin, as the bridge between the porous copper substrate and metallic Li, plays a critical role in optimizing Li nucleation and enhancing the fast lithium migration kinetics. This work demonstrates that lithiophilic binary copper alloys are an effective way to achieve room-temperature high rate performance and satisfied low-temperature cycling stability for Li metal batteries.

Identifying the Role of the Cationic Geometric Configuration in Spinel Catalysts for Polysulfide Conversion in Sodium-Sulfur Batteries

An AB2X4 spinel structure, with tetrahedral A and octahedral B sites, is a paradigmatic class of catalysts with several possible geometric configurations and numerous applications, including polysulfide conversion in metal-sulfur batteries. Nonetheless, the influence of the geometric configuration and composition on the mechanisms of catalysis and the precise manner in which spinel catalysts facilitate the conversion of polysulfides remain unknown. To enable controlled exposure of single active configurations, herein, Cotd2+ and Cooh3+ in Co3O4 catalysts for sodium polysulfide conversion are in large part replaced by Fetd2+ and Feoh3+, respectively, generating FeCo2O4 and CoFe2O4. Through an examination of electrochemical activation energies, the characterization of symmetric cells, and theoretical calculations, we determine that Cooh3+ serves as the active site for the breaking of S-S bonds, while Cotd2+ functions as the active site for the formation of S-Na bonds. The current study underlines the subtle relationship between activity and geometric configurations of spinel catalysts, providing unique insights for the rational development of improved catalysts by optimizing their atomic geometric configuration.

Durable modulation of Zn(002) plane deposition via reproducible zincophilic carbon quantum dots towards low N/P ratio zinc-ion batteries

Aqueous zinc-ion batteries (ZIBs) are promising candidates for next-generation energy storage systems due to their intrinsic safety, environmental friendliness, and low cost. However, the uncontrollable Zn dendrite growth during cycling is still a critical challenge for the long-term operation of ZIBs, especially under harsh lean-Zn conditions. Herein, we report nitrogen and sulfur-codoped carbon quantum dots (N,S-CDs) as zincophilic electrolyte additives to regulate the Zn deposition behaviors. The N,S-CDs with abundant electronegative groups can attract Zn2+ ions and co-deposit with Zn2+ ions on the anode surface, inducing a parallel orientation of the (002) crystal plane. The deposition of Zn preferentially along the (002) crystal direction fundamentally avoids the formation of Zn dendrites. Moreover, the co-depositing/stripping feature of N,S-CDs under an electric field force ensures the reproducible and long-lasting modulation of the Zn anode stability. Benefiting from these two unique modulation mechanisms, stable cyclability of the thin Zn anodes (10 and 20 μm) at a high depth of discharge (DOD) of 67% and high Zn||Na2V6O16·3H2O (NVO, 11.52 mg cm-2) full-cell energy density (144.98 W h Kg-1) at a record-low negative/positive (N/P) capacity ratio of 1.05 are achieved using the N,S-CDs as an additive in ZnSO4 electrolyte. Our findings not only offer a feasible solution for developing actual high-energy density ZIBs but also provide in-depth insights into the working mechanism of CDs in regulating Zn deposition behaviors.

Ultrafast deposition of faceted lithium polyhedra by outpacing SEI formation

Electrodeposition of lithium (Li) metal is critical for high-energy batteries1. However, the simultaneous formation of a surface corrosion film termed the solid electrolyte interphase (SEI)2 complicates the deposition process, which underpins our poor understanding of Li metal electrodeposition. Here we decouple these two intertwined processes by outpacing SEI formation at ultrafast deposition current densities3 while also avoiding mass transport limitations. By using cryogenic electron microscopy4-7, we discover the intrinsic deposition morphology of metallic Li to be that of a rhombic dodecahedron, which is surprisingly independent of electrolyte chemistry or current collector substrate. In a coin cell architecture, these rhombic dodecahedra exhibit near point-contact connectivity with the current collector, which can accelerate inactive Li formation8. We propose a pulse-current protocol that overcomes this failure mode by leveraging Li rhombic dodecahedra as nucleation seeds, enabling the subsequent growth of dense Li that improves battery performance compared with a baseline. While Li deposition and SEI formation have always been tightly linked in past studies, our experimental approach enables new opportunities to fundamentally understand these processes decoupled from each other and bring about new insights to engineer better batteries.

In Situ Anchoring Ultrafine ZnS Nanodots on 2D MXene Nanosheets for Accelerating Polysulfide Redox and Regulating Li Plating

Lithium-sulfur (Li-S) battery is a promising energy storage system due to its cost effectiveness and high energy density. However, formation of Li dendrites from Li metal anode and shuttle effect of lithium polysulfides (LiPSs) from S cathode impede its practical application. Herein, ultrafine ZnS nanodots are uniformly grown on 2D MXene nanosheets by a low-temperature (60 °C) hydrothermal method for the first time. Distinctively, the ZnS nanodot-decorated MXene nanosheets (ZnS/MXene) can be easily filtered to be a flexible and freestanding film in several minutes. The ZnS/MXene film can be used as a current collector for Li-metal anode to promote uniform Li deposition due to the superior lithiophilicity of ZnS nanodots. ZnS/MXene powders obtained by freeze drying can be used as separator decorator to address the shuttle effect of LiPSs due to their excellent adsorbability. Theoretical calculation proves that the existence of ZnS nanodots on MXene can obviously improve the adsorption ability of ZnS/MXene with Li+ and LiPSs. Li-S full cells with composite Li-metal anode and modified separator exhibit remarkable rate and cycling performance. Other transition metal sulfides (CdS, CuS, etc.) can be also grown on 2D MXene nanosheets by the low-temperature hydrothermal strategy.

Flattening of Lithium Plating in Carbonate Electrolytes Enabled by All-In-One Separator

The uncontrollable dendritic growth of metallic lithium during repeated cycling in carbonate electrolytes is a crucial obstacle hindering the practical use of Li-metal batteries (LMBs). Among numerous approaches proposed to mitigate the intrinsic constraints of Li metal, the design of a functional separator is an attractive approach to effectively suppress the growth of Li dendrites because direct contact with both the Li metal surface and the electrolyte is maintained. Here, a newly designed all-in-one separator containing bifunctional CaCO₃ nanoparticles (CPP separator) is proposed to achieve the flattening of Li deposits on the Li electrode. Strong interactions between the highly polar CaCO₃ nanoparticles and the polar solvent reduces the ionic radius of the Li⁺ -solvent complex, thus increasing the Li⁺ transference number and leading to a reduced concentration overpotential in the electrolyte-filled separator. Furthermore, the integration of CaCO₃ nanoparticles into the separator induces the spontaneous formation of mechanically-strong and lithiophilic CaLi₂ at the Li/separator interface, which effectively decreases the nucleation overpotential toward Li plating. As a result, the Li deposits exhibit dendrite-free planar morphologies, thus enabling excellent cycling performance in LMBs configured with a high-Ni cathode in a carbonate electrolyte under practical operating conditions.

Directing Highly Ordered and Dense Li Deposition to Achieve Stable Li Metal Batteries

Li metal anode is promising to achieve high-energy-density battery. However, it has rapid capacity fading due to the generation of inactive Li (dead Li), especially at high current density. This study reveals that the random distribution of Li nuclei leads to large uncertainty for the further growth behavior on Cu foil. Here, periodical regulation of Li nucleation sites on Cu foil by ordered lithiophilic micro-grooves is proposed to precisely manipulate the Li deposition morphology. The management of Li deposits in the lithiophilic grooves can induce high pressure on the Li particles, leading to the formation of dense Li structure and smooth surface without dendrite growth. Li deposits comprising tightly packed large Li particles largely reduce the side reaction and the generation of isolated metallic Li at high current density. Less dead Li accumulating on the substrate significantly prolongs the cycling life of full cells with limited Li inventory. The precise manipulation of the Li deposition on Cu is promising for high-energy and stable Li metal batteries.

The Inducement and "Rejuvenation" of Li Dendrites by Space Confinement and Positive Fe/Co-Sites

The high reactivity of Li metal and the inhomogeneous Li deposition leads to the formation of Li dendrites and "dead" Li, which impedes the performance of Li metal batteries (LMBs) with high energy density. The regulating and guiding the Li dendrite nucleation is a desirable tactic to realize concentrated distribution of Li dendrites instead of completely inhibiting dendrite formation. Here, a Fe-Co-based Prussian blue analog with hollow and open framework (H-PBA) is employed to modify the commercial polypropylene separator (PP@H-PBA). This functional PP@H-PBA can guide the lithium dendrite growth to form uniform lithium deposition and activate the inactive Li. In details, the H-PBA with macroporous structure and open framework can induce the growth of lithium dendrites via space confinement, while the positive Fe/Co-sites lowered by polar cyanide (-CN) of PBA can reactivate the inactive Li. Thus, the Li|PP@H-PBA|Li symmetric cells exhibit long-term stability at 1 mA cm^-2 for 1 mAh cm^-2 over 500 h. And the Li-S batteries with PP@H-PBA deliver favorable cycling performance at 500 mA g^-1 for 200 cycles.

Progressive and instantaneous nature of lithium nucleation discovered by dynamic and operando imaging

The understanding of lithium (Li) nucleation and growth is important to design better electrodes for high-performance batteries. However, the study of Li nucleation process is still limited because of the lack of imaging tools that can provide information of the entire dynamic process. We developed and used an operando reflection interference microscope (RIM) that enables real-time imaging and tracking the Li nucleation dynamics at a single nanoparticle level. This dynamic and operando imaging platform provides us with critical capabilities to continuously monitor and study the Li nucleation process. We find that the formation of initial Li nuclei is not at the exact same time point, and Li nucleation process shows the properties of both progressive and instantaneous nucleation. In addition, the RIM allows us to track the individual Li nucleus's growth and extract spatially resolved overpotential map. The nonuniform overpotential map indicates that the localized electrochemical environments substantially influence the Li nucleation.

Nonepitaxial Electrodeposition of (002)-Textured Zn Anode on Textureless Substrates for Dendrite-Free and Hydrogen Evolution-Suppressed Zn Batteries

Nontoxic and safe aqueous Zn batteries are largely restricted by the detrimental dendrite growth and hydrogen evolution of Zn metal anode. The (002)-textured Zn electrodeposition, demonstrated as an effective approach for solving these issues, is nevertheless achieved mainly by epitaxial or hetero-epitaxial deposition of Zn on pre-textured substrates. Herein, the electrodeposition of (002)-textured and compact Zn on textureless substrates (commercial Zn, Cu, and Ti foils) at a medium-high galvanostatic current density is reported. According to the systematic investigations on Zn nucleation and growth behaviors, this is ascribed to two reasons: i) the promoted nonepitaxial nucleation of fine horizontal (002) nuclei at increased overpotential and ii) the competitive growth advantages of (002)-orientated nuclei. The resulting freestanding (002)-textured Zn film exhibits significantly suppressed hydrogen evolution and prolonged Zn plating-stripping cycling life, achieving over 2100 mAh cm^-2 cumulative capacity under a current density of 10 mA cm^-2 and a high depth of discharge (DOD) of 45.5%. Therefore, this study provides both fundamental and practical insights into long-life Zn metal batteries.

Regulating Inorganic and Organic Components to Build Amorphous-ZnFx Enriched Solid-Electrolyte Interphase for Highly Reversible Zn Metal Chemistry

The introduction of inorganic crystallites into a solid-electrolyte interphase (SEI) is an effective strategy for improving the reversibility of the Zn metal anode (ZMA). However, the structure-performance relationship of the SEI is not fully understood because the existing forms of its inorganic and organic components in their pristine states are not resolved. Here, a highly effective SEI is constructed for ZMA using a bisolvent electrolyte and resolved its composition/structure by cryogenic transmission electron microscopy. This highly fluorinated SEI with amorphous inorganic ZnF_x uniformly distributed in the organic matrix is largely different from the common mosaic and multilayer SEIs with crystalline inorganics. It features improved structural integrity, mechanical toughness, and Zn²⁺ ion conductivity. Consequently, the ZMA exhibits excellent reversibility with an enhanced plating/stripping Coulombic efficiency of 99.8%. The ZMA-based full cell achieves a high Zn utilization ratio of 54% at a practical areal capacity of 3.2 mAh cm^-2 and stable cycling over 1800 h during which the accumulated capacity reached 5600 mAh cm^-2 . This research highlights the detailed structure and composition of amorphous SEIs for highly reversible metal anodes.

Constructing 3D Skeleton on Commercial Copper Foil via Electrophoretic Deposition of Lithiophilic Building Blocks for Stable Lithium Metal Anodes

Lithium (Li) metal has been regarded as the "Holy Grail" of Li battery anodes thanks to its high theoretic specific capacity and low reduction potential, but uneven formation of Li dendrites and uncontrollable Li volume changes hinder the practical applications of Li metal anodes. A three-dimensional (3D) current collector is one of the promising strategies to address the above issues if it can be compatible with current industrialized process. Here, Au-decorated carbon nanotubes (Au@CNTs) are electrophoretically deposited on commercial Cu foil as a 3D lithiophilic skeleton to regulate Li deposition. The thickness of the as-prepared 3D skeleton can be accurately controlled by adjusting the deposition time. Benefitting from the reduced localized current density and improved Li affinity, the Au@CNTs-deposited Cu foil (Au@CNTs@Cu foil) achieves uniform Li nucleation and dendrite-free Li deposition. Compared with bare Cu foil and CNTs deposited Cu foil (CNTs@Cu foil), the Au@CNTs@Cu foil exhibits enhanced Coulombic efficiency and better cycling stability. In the full-cell configuration, the Au@CNTs@Cu foil with predeposited Li shows superior stability and rate performance. This work provides a facial strategy to directly construct a 3D skeleton on commercial Cu foils with lithiophilic building blocks for stable and practical Li metal anodes.

Effect of Fast Charging on Lithium-Ion Batteries: A Review

<div>In recent years we have seen a dramatic shift toward the use of lithium-ion batteries (LIB) in a variety of applications, including portable electronics, electric vehicles (EVs), and grid storage. Even though more and more car companies are making electric models, people still worry about how far the batteries will go and how long it will take to charge them. It is common knowledge that the high currents that are necessary to quicken the charging process also lower the energy efficiency of the battery and cause it to lose capacity and power more quickly. We need an understanding of atoms and systems to better comprehend fast charging (FC) and enhance its effectiveness. These difficulties are discussed in detail in this work, which examines the literature on physical phenomena limiting battery charging speeds as well as the degradation mechanisms that typically occur while charging at high currents. Special consideration is given to charging at low temperatures. The consequences for safety are investigated, including the possible impact that rapid charging could have on the characteristics of thermal runaway (TR). In conclusion, knowledge gaps are analyzed, and recommendations are made as regards the path that subsequent studies should take. Furthermore, there is a need to give more attention to creating dependable onboard methods for detecting lithium plating (LP) and mechanical damage. It has been observed that robust charge optimization processes based on models are required to ensure faster charging in any environment. Thermal management strategies to both cool batteries while these are being charged and heat them up when these are cold are important, and a lot of attention is paid to methods that can do both quickly and well.</div>

Enabling 420 Wh kg-1 Stable Lithium-Metal Pouch Cells by Lanthanum Doping

Lithium (Li) metal, a promising anode for high-energy-density rechargeable batteries, typically grows along the low-surface energy (110) plane in the plating process, resulting in uncontrollable dendrite growth and unstable interface. Herein, an unexpected Li growth behavior by lanthanum (La) doping is reported: the preferred orientation turns to (200) from (110) plane, enabling 2D nuclei rather than the usual 1D nuclei upon Li deposition and thus forming a dense and dendrite-free morphology even at an ultrahigh areal capacity of 10 mAh cm^-2 . Noticeably, La doping further decreases the reactivity of Li metal toward electrolytes, thereby establishing a stable interface. The dendrite-free, stable Li anode enables a high average Coulombic efficiency of 99.30% at 8 mAh cm^-2 for asymmetric Li||LaF₃ -Cu cells. A 3.1 Ah LaF₃ -Li||LiNi_0.8 Co_0.1 Mn_0.1 O₂ pouch cell at a high energy density (425.73 Wh kg^-1 ) with impressive cycling stability (0.0989% decay per cycle) under lean electrolyte (1.76 g Ah^-1 ) and high cathode loading (5.77 mAh cm^-2 ) using this doped Li anode is further demonstrated.

Dynamically Interfacial pH-Buffering Effect Enabled by N-Methylimidazole Molecules as Spontaneous Proton Pumps toward Highly Reversible Zinc-Metal Anodes

Aqueous zinc-metal batteries have attracted extensive attention due to their outstanding merits of high safety and low cost. However, the intrinsic thermodynamic instability of zinc in aqueous electrolyte inevitably results in hydrogen evolution, and the consequent generation of OH^- at the interface will dramatically exacerbate the formation of dead zinc and dendrites. Herein, a dynamically interfacial pH-buffering strategy implemented by N-methylimidazole (NMI) additive is proposed to remove the detrimental OH^- at zinc/electrolyte interface in real-time, thus eliminating the accumulation of by-products fundamentally. Electrochemical quartz crystal microbalance and molecular dynamics simulation results reveal the existence of an interfacial absorption layer assembled by NMI and protonated NMI (NMIH⁺ ), which acts as an ion pump for replenishing the interface with protons constantly. Moreover, an in situ interfacial pH detection method with micro-sized spatial resolution based on the ultra-microelectrode technology is developed to probe the pH evolution in diffusion layer, confirming the stabilized interfacial chemical environment in NMI-containing electrolyte. Accordingly, with the existence of NMI, an excellent cumulative plating capacity of 4.2 Ah cm^-2 and ultrahigh Coulombic efficiency of 99.74% are realized for zinc electrodes. Meanwhile, the NMI/NMIH⁺ buffer additive can accelerate the dissolution/deposition process of MnO₂ /Mn²⁺ on the cathode, leading to enhanced cycling capacity.

Interlayer Sodium Plating/Stripping in Van der Waals-Layered Quantum Dot Superstructure

Assembling quantum dots (QDs) into van der Waals (vdW)-layered superstructure holds great promise for the development of high-energy-density metal anode. However, designing such a superstructure remains to be challenging. Here, a chemical-vapor Oriented Attachment (OA) growth strategy is proposed to achieve the synthesis of vdW-layered carbon/QDs hybrid superlattice nanosheets (Fe₇ S₈ @CNS) with a large vdW gap of 3 nm. The Fe₇ S₈ @CNS superstructure is assembled by carbon-coated Fe₇ S₈ (Fe₇ S₈ @C) QDs as building blocks. Interestingly, the Fe₇ S₈ @CNS exhibits two kinds of edge dislocations similar to traditional atom-layered materials, suggesting that Fe₇ S₈ @C QDs exhibit quasi-atomic growth behavior during the OA process. More interestingly, when used as host materials for sodium metal anodes, the Fe₇ S₈ @CNS shows the interlayer sodium plating/stripping behavior, which well suppresses Na dendrite growth. As a result, the cell with Fe₇ S₈ @CNS anode can keep stable cycling for 1000 h with a high Coulombic efficiency (CE) of ≈99.5% at 3.0 mA cm^-2 and 3.0 mAh cm^-2 . Noticeably, the Na@Fe₇ S₈ @CNS||Na₃ V₂ (PO₄ )₃ full cells can attain a capacity of 88.8 mAh g^-1 with a retention of 97% after 1000 cycles at 1.0 A g^-1 (≈8 C), showing excellent cycle stability for practical applications. This work enriches the vdW-layered QDs superstructure family and their application toward energy storage.

Mechanistic study of Al2O3 coating effects on lithium deposition and dissolution reaction

Lithium metal anodes show great promise for use in next-generation secondary batteries, but they suffer from lithium dendrite growth, as well as other issues, which cause safety problems and result in a loss of capacity with time. The use of artificial inorganic solid electrolyte interphase (SEI) layers, such as those comprising Al2O3, is a promising way to mitigate these disadvantages, but the mechanism behind these observed improvements remains poorly understood. Therefore, in this study, using pulsed laser deposition (PLD), the surface of a Cu electrode was coated with a physicochemically stable and mechanically strong Al2O3 thin film, and the effects of the film coating on the lithium deposition and dissolution behaviour were investigated. When the morphology of the deposits was evaluated by scanning electron microscopy, small lithium nuclei (approximately 0.2 μm in diameter) were observed to be deposited uniformly over the entire surface of the uncoated Cu electrode in the initial electrodeposition, and these grew into needle-like crystals from the nuclei. After 60 min of electrodeposition, the needle-like precipitates had aggregated and grown into three-dimensional structures with dendritic form. In contrast, on the surface of the Cu electrode modified with Al2O3 by PLD for 1 h, lithium clusters of about 50 μm in diameter were found to be aggregated and precipitated in the initial stages of electrodeposition. Notably, this is the first report of lithium deposition on Al2O3 thin films. With further cycling, the precipitates grew into two-dimensional flat plates. Analysis of the SEI film formed during the first deposition reaction revealed that the Al2O3 coating reduced the thickness of the SEI compared to that of the uncoated electrode. Therefore, the Al2O3 coating suppressed the decomposition of the electrolyte with the Cu electrode. The use of Al2O3 coatings results in (i) the growth of two-dimensional lithium clusters with an island shape on the Al2O3 thin film, and these could ensure a uniform electron conduction path to the electrode; in addition, (ii) the inhibited electrolyte decomposition caused by the low-surface-area lithium clusters and the low electronic conductivity of the Al2O3 thin film. These improve the coulombic efficiency and cycling behaviour.

Dual-Functional Lithiophilic/Sulfiphilic Binary-Metal Selenide Quantum Dots Toward High-Performance Li-S Full Batteries

The commercial viability of lithium-sulfur batteries is still challenged by the notorious lithium polysulfides (LiPSs) shuttle effect on the sulfur cathode and uncontrollable Li dendrites growth on the Li anode. Herein, a bi-service host with Co-Fe binary-metal selenide quantum dots embedded in three-dimensional inverse opal structured nitrogen-doped carbon skeleton (3DIO FCSe-QDs@NC) is elaborately designed for both sulfur cathode and Li metal anode. The highly dispersed FCSe-QDs with superb adsorptive-catalytic properties can effectively immobilize the soluble LiPSs and improve diffusion-conversion kinetics to mitigate the polysulfide-shutting behaviors. Simultaneously, the 3D-ordered porous networks integrated with abundant lithophilic sites can accomplish uniform Li deposition and homogeneous Li-ion flux for suppressing the growth of dendrites. Taking advantage of these merits, the assembled Li-S full batteries with 3DIO FCSe-QDs@NC host exhibit excellent rate performance and stable cycling ability (a low decay rate of 0.014% over 2,000 cycles at 2C). Remarkably, a promising areal capacity of 8.41 mAh cm-2 can be achieved at the sulfur loading up to 8.50 mg cm-2 with an ultra-low electrolyte/sulfur ratio of 4.1 μL mg-1. This work paves the bi-serve host design from systematic experimental and theoretical analysis, which provides a viable avenue to solve the challenges of both sulfur and Li electrodes for practical Li-S full batteries.

In situ artificial solid electrolyte interface engineering on an anode for prolonging the cycle life of lithium-metal batteries

Lithium, with its high theoretical capacity and low potential, has been widely investigated as the anode in energy storage/conversion devices. However, their commercial applications always suffer from undesired dendrite growth, which forms in the charging process and may puncture the separator, leading to short cycle lives and even security problems. Herein, by an in situ displacement reaction using SnF₂ at room temperature, we constructed an artificial solid electrolyte interface (ASEI) of LiF/Li-Sn outside the Li anode. This hybrid strategy can induce a synergy between the high Li⁺ conductivity of the Li-Sn alloy and good electrical insulation of LiF. Moreover, extreme synergy can be achieved by moderating the thickness of the LiF/Li-Sn ASEI, guiding dendrite-free lithium plating and stripping. As a result, a Li//LiFePO₄ battery that is assembled from the LiF/Li-Sn ASEI-engineered Li anode can obtain 1000 cycled lives with 86.3% capacity retention under a charge/discharge rate of 5 C. This work provides an alternative way to construct dendrite-free lithium metal anodes, which significantly benefit the cycle lives of LMBs.

Reconstructing the Anode Interface and Solvation Shell for Reversible Zinc Anodes

The attractive advantages of the Zn metal anode and water-based electrolyte, such as inherent safety and low cost, endow the zinc-ion batteries (ZIBs) with great potential in the future energy storage market. However, the severe surface side reactions and dendrites affect the service lifespan and electrochemical performance of ZIBs. Herein, a bifunctional electrolyte additive, l-ascorbic acid sodium (LAA), has been added into ZnSO₄ (ZSO) electrolyte (ZSO + LAA) to settle the above issues of ZIBs. On the one hand, the LAA additive tends to adsorb on the Zn anode surface to generate a H₂O-resistive passivation layer, which can effectively isolate the H₂O corrosion and regulate the Zn²⁺ ion 3D diffusion, thus inducing a uniform deposition layer. On the other hand, the strong adsorption capacity between LAA and Zn²⁺ can transform the solvated [Zn(H₂O)₆]²⁺ into [Zn(H₂O)₄LAA], thus reducing the coordinated H₂O molecules and further suppressing side reactions. With this synergy effect, the Zn/Zn symmetric battery with the ZSO + LAA electrolyte can deliver a cycle life of 1200 h under 1 mA cm^-2, and the Zn/Ti battery also presents an ultrahigh Coulombic efficiency of 99.16% under 1 mA cm^-2, greatly superior to the batteries with the ZSO electrolyte. Additionally, the effectiveness of the LAA additive can be further verified in the Zn/MnO₂ full battery and pouch cell.

Polysaccharide hydrogel electrolytes with robust interfacial contact to electrodes for quasi-solid state flexible aqueous zinc ion batteries with efficient suppressing of dendrite growth

Flexible aqueous zinc-ion batteries (AZIBs) require high conductive and adhesive hydrogel electrolytes. However, high adhesion tends to hinder ion conduction rate. Herein, we designed a water/glycerol binary solvent coordinating the hydrophilic polymers to reconstruct the water molecules' environment in the hydrogel. As a consequence, the interface adhesion strength between Zn and the hydrogel reached 3.0 kPa and the ionic conductivity was up to 16.8 mS cm^-1. In addition, inspired by the slurry electrode preparation method, we developed a simple blade coating technique using a non-Newtonian polysaccharide liquid solution to construct an ultra-thin hydrogel electrolyte in situ on the cathode. The thickness of the obtained hydrogel reached 70 μm, and the ultrathin flexible AZIBs were easily constructed by pasting a Zn anode directly on the adhesive hydrogel, showing the potential of flexible AZIBs scalable assembly. In addition, the Zn//Zn symmetrical cells with the hydrogel electrolyte provided stable cycling performance for over 400 h at 0.1 mA cm^-2 with suppressed dendrite growth. The assembled Zn//Polyaniline battery and Zn//V₂O₅ battery also exhibited excellent capacity retention after cycles. This work has realized the hydrogel electrolyte with high adhesion and conductivity, which has good adaptability to metal electrodes and opened up a new practical way for large-scale assembly of flexible energy storage devices.

Realizing Textured Zinc Metal Anodes through Regulating Electrodeposition Current for Aqueous Zinc Batteries

Crystallography modulation of zinc (Zn) metal anode is promising to promote Zn reversibility in aqueous electrolytes, but efficiently constructing Zn with specific crystallographic texture remains challenging. Herein, we report a current-controlled electrodeposition strategy to texture the Zn electrodeposits in conventional aqueous electrolytes. Using the electrolytic cell with low-cost Zn(CH₃ COO)₂ electrolyte and Cu substrate as a model system, the texture of as-deposited Zn gradually transforms from (101) to (002) crystal plane as increasing the current density from 20 to 80 mA cm^-2 . Moreover, the high current accelerates the Zn nucleation rate with abundant nuclei, enabling uniform deposition. The (002) texture permits stronger resistance to dendrite growth and interfacial side reactions than the (101) texture. The resultant (002)-textured Zn electrode achieves deep cycling stability and supports the stable operation of full batteries with conventional V/Mn-based oxide cathodes.

Advanced Composite Lithium Metal Anodes with 3D Frameworks: Preloading Strategies, Interfacial Optimization, and Perspectives

Lithium (Li) metal is regarded as the most promising anode candidate for next-generation rechargeable storage systems due to its impeccable capacity and the lowest electrochemical potential. Nevertheless, the irregular dendritic Li, unstable interface, and infinite volume change, which are the intrinsic drawbacks rooted in Li metal, give a seriously negative effect on the practical commercialization for Li metal batteries. Among the numerous optimization strategies, designing a 3D framework with high specific surface area and sufficient space is a convincing way out to ameliorate the above issues. Due to the Li-free property of the 3D framework, a Li preloading process is necessary before the 3D framework that matches with the electrolyte and cathode. How to achieve homogeneous integration with Li and 3D framework is essential to determine the electrochemical performance of Li metal anode. Herein, this review overviews the recent general fabrication methods of 3D framework-based composite Li metal anode, including electrodeposition, molten Li infusion, and pressure-derived fabrication, with the focus on the underlying mechanism, design criteria, and interfacial optimization. These results can give specific perspectives for future Li metal batteries with thin thickness, low N/P ratio, lean electrolyte, and high energy density (>350 Wh Kg^-1 ).

Anion-enrichment interface enables high-voltage anode-free lithium metal batteries

Aggressive chemistry involving Li metal anode (LMA) and high-voltage LiNi_0.8Mn_0.1Co_0.1O₂ (NCM811) cathode is deemed as a pragmatic approach to pursue the desperate 400 Wh kg^-1. Yet, their implementation is plagued by low Coulombic efficiency and inferior cycling stability. Herein, we propose an optimally fluorinated linear carboxylic ester (ethyl 3,3,3-trifluoropropanoate, FEP) paired with weakly solvating fluoroethylene carbonate and dissociated lithium salts (LiBF₄ and LiDFOB) to prepare a weakly solvating and dissociated electrolyte. An anion-enrichment interface prompts more anions' decomposition in the inner Helmholtz plane and higher reduction potential of anions. Consequently, the anion-derived interface chemistry contributes to the compact and columnar-structure Li deposits with a high CE of 98.7% and stable cycling of 4.6 V NCM811 and LiCoO₂ cathode. Accordingly, industrial anode-free pouch cells under harsh testing conditions deliver a high energy of 442.5 Wh kg^-1 with 80% capacity retention after 100 cycles.

Rational Design of Flexible Zn-Based Batteries for Wearable Electronic Devices

The advent of 5G and the Internet of Things has spawned a demand for wearable electronic devices. However, the lack of a suitable flexible energy storage system has become the "Achilles' Heel" of wearable electronic devices. Additional problems during the transformation of the battery structure from conventional to flexible also present a severe challenge to the battery design. Flexible Zn-based batteries, including Zn-ion batteries and Zn-air batteries, have long been considered promising candidates due to their high safety, eco-efficiency, substantial reserve, and low cost. In the past decade, researchers have come up with elaborate designs for each portion of flexible Zn-based batteries to improve the ionic conductivities, mechanical properties, environment adaptabilities, and scalable productions. It would be helpful to summarize the reported strategies and compare their pros and cons to facilitate further research toward the commercialization of flexible Zn-based batteries. In this review, the current progress in developing flexible Zn-based batteries is comprehensively reviewed, including their electrolytes, cathodes, and anodes, and discussed in terms of their synthesis, characterization, and performance validation. By clarifying the challenges in flexible Zn-based battery design, we summarize the methodology from previous investigations and propose challenges for future development. In the end, a research paradigm of Zn-based batteries is summarized to fit the burgeoning requirement of wearable electronic devices in an iterative process, which will benefit the future development of Zn-based batteries.

Revealing the Multifunctions of Li3N in the Suspension Electrolyte for Lithium Metal Batteries

Inorganic-rich solid-electrolyte interphases (SEIs) on Li metal anodes improve the electrochemical performance of Li metal batteries (LMBs). Therefore, a fundamental understanding of the roles played by essential inorganic compounds in SEIs is critical to realizing and developing high-performance LMBs. Among the prevalent SEI inorganic compounds observed for Li metal anodes, Li₃N is often found in the SEIs of high-performance LMBs. Herein, we elucidate new features of Li₃N by utilizing a suspension electrolyte design that contributes to the improved electrochemical performance of the Li metal anode. Through empirical and computational studies, we show that Li₃N guides Li electrodeposition along its surface, creates a weakly solvating environment by decreasing Li⁺-solvent coordination, induces organic-poor SEI on the Li metal anode, and facilitates Li⁺ transport in the electrolyte. Importantly, recognizing specific roles of SEI inorganics for Li metal anodes can serve as one of the rational guidelines to design and optimize SEIs through electrolyte engineering for LMBs.

Localized Recrystallization of a Lithium-Metal Anode during Fast Stripping in High-Activity Liquid Electrolytes

The lithium-metal anode is one of the most promising candidates for "beyond-lithium-ion" batteries thanks to its high specific capacity and low negative electrochemical potential. However, the electrode-electrolyte interface instability hinders its commercialization in rechargeable batteries. During cycles of charging and discharging, the lithium-metal anode is electrochemically plated and stripped along with the morphological evolution, which determines the cycling performance. In this work, with a phase-field model, we computationally characterize the morphological evolution dynamics during the plating and stripping steps at the lithium-metal-electrolyte interface. Our model is valid in a wide range of lithium concentrations in liquid electrolytes by incorporating nonidealities of electrolyte solutions into the interfacial reaction kinetics. Intriguingly, at fast stripping, i.e., high discharging overpotential, we observe an unexpected localized recrystallization phenomenon in high-lithium-ion-concentration valley regions. This recrystallization phenomenon mitigates the overall reaction rate heterogeneity and provides a potential approach to improving the morphological stability. Furthermore, we systematically investigate the correlation between the recrystallization phenomenon and lithium-ion activity and draw a simplified phase diagram for the overpotential-dependent recrystallization.

Realizing Holistic Charging-Discharging for Dendrite-Free Lithium Metal Anodes via Constructing Three-Dimensional Li+ Conductive Networks

Lithium (Li) metal is a promising candidate for next-generation anode materials with high energy densities. However, Li dissolution/deposition processes are limited at the upper surface in contact with the electrolyte, which brings a locally high current density and then results in dendritic Li growth. This restraint of the local surface reaction during cycling has not been solved by commonly used modification strategies. In this study, a three-dimensional (3D) Li⁺ conductive skeleton is activated from atomic layer deposition (ALD) coating Li₃PO₄ (LPO) on the surface of the Ni foam (LPNF). Then, the skeleton is efficiently constructed in the Li metal anode by the lower-temperature Li infusion. Ionic conductor LPO layers and electronic conductor Ni fibers supply charge transport channels between the electrolyte and the internal Li. The mixed conductive network realizes holistic charge transfer, which is proved by in situ scanning electron microscopy experiments. In virtue of dispersive dissolution/deposition and optimized electrochemical kinetics brought by a Li⁺ conductive network, the composited Li electrode presents an excellent symmetric battery cycling stability (over 1200 h) and enhanced rate performances (stable cycling even at 10.0 mA cm^-2). When matching with a LiCoO₂ (LCO) cathode, LCO||Li@LPNF full batteries exhibit a capacity retention of 80.8% over 250 cycles. During cycling, there was no evidence of dendrite growth and the remaining Li in the composited anode showed a smooth, compact, and well-combined condition with LPNF. Through constructing a 3D Li⁺ conductive network, the composited Li metal anode breaks through the limit of the local surface reaction; this work proposes a novel insight of realizing holistic charging/discharging for the dendrite-free Li metal anode.

Stable Anode-Free All-Solid-State Lithium Battery through Tuned Metal Wetting on the Copper Current Collector

A stable anode-free all-solid-state battery (AF-ASSB) with sulfide-based solid-electrolyte (SE) (argyrodite Li₆ PS₅ Cl) is achieved by tuning wetting of lithium metal on "empty" copper current-collector. Lithiophilic 1 µm Li₂ Te is synthesized by exposing the collector to tellurium vapor, followed by in situ Li activation during the first charge. The Li₂ Te significantly reduces the electrodeposition/electrodissolution overpotentials and improves Coulombic efficiency (CE). During continuous electrodeposition experiments using half-cells (1 mA cm^-2 ), the accumulated thickness of electrodeposited Li on Li₂ Te-Cu is more than 70 µm, which is the thickness of the Li foil counter-electrode. Full AF-ASSB with NMC811 cathode delivers an initial CE of 83% at 0.2C, with a cycling CE above 99%. Cryogenic focused ion beam (Cryo-FIB) sectioning demonstrates uniform electrodeposited metal microstructure, with no signs of voids or dendrites at the collector-SE interface. Electrodissolution is uniform and complete, with Li₂ Te remaining structurally stable and adherent. By contrast, an unmodified Cu current-collector promotes inhomogeneous Li electrodeposition/electrodissolution, electrochemically inactive "dead metal," dendrites that extend into SE, and thick non-uniform solid electrolyte interphase (SEI) interspersed with pores. Density functional theory (DFT) and mesoscale calculations provide complementary insight regarding nucleation-growth behavior. Unlike conventional liquid-electrolyte metal batteries, the role of current collector/support lithiophilicity has not been explored for emerging AF-ASSBs.

Intrinsic Interfacial Dynamic Engineering of Zincophilic Microbrushes via Regulating Zn Deposition for Highly Reversible Aqueous Zinc Ion Battery

Aqueous rechargeable zinc ion batteries are promising efficient energy storage systems due to remarkable safety and satisfactory capacity. However, zinc metal anode instability including dendrite growth and side reactions severely hinders widespread applications. Herein, zincophilic microbrushes have been in situ anchored on zinc plates through simple freeze-drying and mild reduction of graphene oxide, successfully overcoming these thorny issues. By introducing suitable oxygen-containing groups, the microbrushes exhibit a good affinity for zinc ions, thereby providing sufficient depositing sites, promoting zinc plating and stripping during cycling, and suppressing side reactions. The delicate zincophilic microbrushes can not only function as protective layer to guide the deposition of zinc ions, but also act as high-speed pathways to redistribute the zinc ion flux for rapid kinetics. Consequently, the microbrushes-covered zinc anode displays long lifespan and good durability, whenever in symmetric cell or full battery tests. This work paves a feasible bridge to design advanced aqueous anodes by architecting both structures and compositions of metal coverings.

Regulating Zinc Nucleation Sites and Electric Field Distribution to Achieve High-Performance Zinc Metal Anode via Surface Texturing

Understanding zinc (Zn) deposition behavior and improving Zn stripping and plating reversibility are significant in developing practical aqueous Zn ion batteries (AZIBs). Zn metal is abundant, cost-effective, and intrinsically safe compared with Li. However, their similar inhomogeneous growth regime harms their practicality. This work reports a facile, easily scalable, but effective method to develop a textured Zn with unidirectional scratches on the surface that electrochemically achieves a high accumulated areal capacity of 5530 mAh cm^-2 with homogenized Zn deposition. In symmetric cells, textured Zn presents a stable cycling performance of 1100 hours (vs 250 h of bare Zn) at 0.5 mA cm^-2 for 0.5 mAh cm^-2 and lower nucleation and plating overpotentials of 120.5 and 41.8 mV. In situ optical microscopy and COMSOL simulation disclose that the textured surface topography can 1) homogenize the electron field distribution on the Zn surface and regulate Zn nucleation and growth, and 2) provides physical space to accommodate Zn deposits, prevent the detachment of "dead" Zn, and improve the structural sufficiency of Zn anode. Moreover, differential electrochemical mass spectrometry analysis find that the textured Zn with regulated interfacial electron activity also presents a higher resistance toward hydrogen evolution and other parasitic reactions.

Highly Reversible Zinc Metal Anode in a Dilute Aqueous Electrolyte Enabled by a pH Buffer Additive

Aqueous zinc-ion batteries have drawn increasing attention due to the intrinsic safety, cost-effectiveness and high energy density. However, parasitic reactions and non-uniform dendrite growth on the Zn anode side impede their application. Herein, a multifunctional additive, ammonium dihydrogen phosphate (NHP), is introduced to regulate uniform zinc deposition and to suppress side reactions. The results show that the NH4 + tends to be preferably absorbed on the Zn surface to form a "shielding effect" and blocks the direct contact of water with Zn. Moreover, NH4 + and (H2 PO4 )- jointly maintain pH values of the electrode-electrolyte interface. Consequently, the NHP additive enables highly reversible Zn plating/stripping behaviors in Zn//Zn and Zn//Cu cells. Furthermore, the electrochemical performances of Zn//MnO2 full cells and Zn//active carbon (AC) capacitors are improved. This work provides an efficient and general strategy for modifying Zn plating/stripping behaviors and suppressing side reactions in mild aqueous electrolyte.

Nanoscale Ultrafine Zinc Metal Anodes for High Stability Aqueous Zinc Ion Batteries

Aqueous Zn batteries (AZBs) are a promising energy storage technology, due to their high theoretical capacity, low redox potential, and safety. However, dendrite growth and parasitic reactions occurring at the surface of metallic Zn result in severe instability. Here we report a new method to achieve ultrafine Zn nanograin anodes by using ethylene glycol monomethyl ether (EGME) molecules to manipulate zinc nucleation and growth processes. It is demonstrated that EGME complexes with Zn²⁺ to moderately increase the driving force for nucleation, as well as adsorbs on the Zn surface to prevent H-corrosion and dendritic protuberances by refining the grains. As a result, the nanoscale anode delivers high Coulombic efficiency (ca. 99.5%), long-term cycle life (over 366 days and 8800 cycles), and outstanding compatibility with state-of-the-art cathodes (ZnVO and AC) in full cells. This work offers a new route for interfacial engineering in aqueous metal-ion batteries, with significant implications for the commercial future of AZBs.

Interfacial Anchored Sesame Ball-like Ag/C To Guide Lithium Even Plating and Stripping Behavior

Lithium (Li) metal is a candidate anode for the next generation of high-energy density secondary batteries. Unfortunately, Li metal anodes (LMAs) are extremely reactive with electrolytes to accumulate uncontrolled dendrites and to generate unwanted parasitic electrochemical reactions. Much attention has been focused on carbon materials to address these issues. Ulteriorly, the failure mechanism investigation of lithiophilic sites on carbon materials has been not taken seriously. Herein, we design a new type of sesame ball-like carbon sphere (AgNPs@CS, an average diameter of ∼700 nm) with uniformly interfacial anchored silver nanoparticles (AgNPs), which is used as the dendrite-free Li metal anode host. This anchored structure significantly enhances reversible and chemical affinity of Li, effectively inhibiting "dead Li". In addition, the protective effect of the carbon layer can avoid the damage of lithiophilic AgNPs in the carbon matrix. With a plating/striping capacity of 2 mA h cm^-2, the AgNPs@CS electrode can be cycled over 2400 h at 0.5 mA cm^-2. When the stripping voltage increases to 1 V, the AgNPs@CS electrode also enables excellent cycling stability to achieve over 260 cycles (1 mA cm^-2, 1 mA h cm^-2) and 130 cycles (2 mA cm^-2, 1 mA h cm^-2). This material by electrochemical characterization highlights the efficacy of this facile method for developing dendrite-free LMAs.

High interfacial-energy heterostructure facilitates large-sized lithium nucleation and rapid Li+ desolvation process

High interfacial energy Li⁰-electrolyte interface contributes to larger Li⁰ nucleation embryos and a more stable interface, so the interfacial energy is essential for highly reversible Li⁰ deposition/stripping. Herein, a high interfacial-energy artificial solid electrolyte interphase (SEI) with rich LiF embedded in lithiated poly-2-acrylamido-2-methylpropane sulfonic acid (PAMPS-Li) network is designed to realize favorable Li⁰ nucleation and rapid desolvation of Li⁺ simultaneously. The Li-F bonds in LiF (001) exhibit stronger ion-dipole interactions with Li atoms, offering higher interfacial energies. When the growth surface energy and total interfacial energy of Li⁰ are balanced, the high interfacial energy SEI with abundant LiF can promote the formation of larger Li⁰ nucleation embryos. In addition, the PAMPS-Li with immobilized anions presents weaker interaction with Li⁰ and possesses higher polymer-Li interfacial energy, and its amide and sulfonic acid groups exhibit higher binding energies with Li⁺. Therefore, PAMPS-Li can easily promote the Li⁺ to escape from the solvent sheath and weaken the desolvation energy barrier. The highly reversible Li⁰ deposition behavior with restricted side reactions is achieved based on the synergistic modification of high interfacial energy SEI with heterostructure. Most importantly, lifespan of multi-layered Li⁰ pouch cell (330 Wh kg^-1) with a low N/P ratio (1.67) is over 100 cycles, verifying its potential practical application.

Additive-Driven Interfacial Engineering of Aluminum Metal Anode for Ultralong Cycling Life

Rechargeable Al batteries (RAB) are promising candidates for safe and environmentally sustainable battery systems with low-cost investments. However, the currently used aluminum chloride-based electrolytes present a significant challenge to commercialization due to their corrosive nature. Here, we report for the first time, a novel electrolyte combination for RAB based on aluminum trifluoromethanesulfonate (Al(OTf)3) with tetrabutylammonium chloride (TBAC) additive in diglyme. The presence of a mere 0.1 M of TBAC in the Al(OTf)3 electrolyte generates the charge carrying electrochemical species, which forms the basis of reaction at the electrodes. TBAC reduces the charge transfer resistance and the surface activation energy at the anode surface and also augments the dissociation of Al(OTf)3 to generate the solid electrolyte interphase components. Our electrolyte's superiority directly translates into reduced anodic overpotential for cells that ran for 1300 cycles in Al plating/stripping tests, the longest cycling life reported to date. This unique combination of salt and additive is non-corrosive, exhibits a high flash point and is cheaper than traditionally reported RAB electrolyte combinations, which makes it commercially promising. Through this report, we address a major roadblock in the commercialization of RAB and inspire equivalent electrolyte fabrication approaches for other metal anode batteries.

Electrodeposition of Silver Nanoparticles on Indium-Doped Tin Oxide Using Hydrogel Electrolyte for Hydrogen Peroxide Sensing

Nanoparticles are used in various fields, including fuel cells, energy conversion devices, and sensors, because of their large surface area and excellent catalytic properties. Although various methods of synthesizing nanoparticles are available, the most popular is the solution-phase reduction of metal ions. Electrodeposition is a method of reducing metal ions in solution and is widely used because of its various advantages. In this study, Ag nanoparticles with a narrow size distribution were evenly dispersed on the surface of an electrode by applying electrodeposition in an agarose hydrogel medium instead of in solution, confirming the feasibility of Ag deposition in agarose hydrogel, even at a lower reduction potential than that in solution. These results are attributed to the electrolyte effect owing to the hydrophilic backbone of the agarose hydrogel and the gel effect, which reduces unexpected convection. H₂O₂ was detected by using the Ag nanoparticles synthesized in agarose hydrogel, and the limit of detection for H₂O₂ was found to be 4.82 µM, with a dynamic range of 1-500 µM. The nanoparticle synthesis platform proposed in this study is expected to be actively used for the synthesis of other metal/nonmetal nanoparticles.

Liquid cell electrochemical TEM: Unveiling the real-time interfacial reactions of advanced Li-metal batteries

Li metal batteries (LMBs) reveal great application prospect in next-generation energy storage, because of their high energy density and low electrochemical potential, especially when paired with elemental sulfur and oxygen cathodes. Complex interfacial reactions have long been a big concern because of the elusive formation/dissolution of Li metal at the solid-electrolyte interface (SEI) layer, which leads to battery degradation under practical operating conditions. To precisely track the reactions at the electrode/electrolyte interfaces, in the past ten years, high spatio-temporal resolution, in situ electrochemical transmission electron microscopy (EC-TEM) has been developed. A preliminary understanding of the structural and chemical variation of Li metal during nucleation/growth and SEI layer formation has been obtained. In this perspective, we give a brief introduction of liquid cell development. Then, we comparably discuss the different configurations of EC-TEM based on open-cell and liquid-cell, and focus on the recent advances of liquid-cell EC-TEM and its investigation in the electrodes, electrolytes, and SEI. Finally, we present a perspective of liquid-cell EC-TEM for future LMB research.

Revitalizing zinc-ion batteries with advanced zinc anode design

Rechargeable aqueous zinc-ion batteries (AZIBs) have attracted significant attention in large-scale energy storage systems due to their unique merits, such as intrinsic safety, low cost, and relatively high theoretical energy density. However, the dilemma of the uncontrollable Zn dendrites, severe hydrogen evolution reaction (HER), and side reactions that occur on the Zn anodes have hindered their commercialization. Herein, a state-of-the-art review of the rational design of highly reversible Zn anodes for high-performance AZIBs is provided. Firstly, the fundamental understanding of Zn deposition, with regard to the nucleation, electro-crystallization, and growth of the Zn nucleus is systematically clarified. Subsequently, a comprehensive survey of the critical factors influencing Zn plating together with the current main challenges is presented. Accordingly, the rational strategies emphasizing structural design, interface engineering, and electrolyte optimization have been summarized and analyzed in detail. Finally, future perspectives on the remaining challenges are recommended, and this review is expected to shed light on the future development of stable Zn anodes toward high-performance AZIBs.

Phase Separation-Controlled Assembly of Hierarchically Porous Aramid Nanofiber Films for High-speed Lithium-Metal Batteries

The growth of lithium (Li) dendrites reduces the lifespan of Li-metal batteries and causes safety issues. Herein, hierarchically porous aramid nanofiber separators capable of effectively suppressing the Li dendrite growth while maintaining highly stable cycle performances at high charge/discharge rates are reported. A two-step solvent exchange process combined with reprotonation-mediated self-assembly is utilized to control the bimodal porous structure of the separators. In particular, when ethanol and water are used sequentially, aramid nanofibers form hierarchical porous structures containing nanopores in macroporous polymer frameworks to yield a mechanically robust membrane with high porosity of 97% or more. The optimized samples exhibit high ionic conductivities of 1.87-4.04 mS cm^-1 and high Li-ion transference numbers of 0.77-0.84 because of the ultrahigh porosity and selective affinity to anions. Li-metal symmetric cells do not show any noticeable presence of dendrites after 100 cycles, and they operate stably for more than 1500 cycles even under extreme conditions with a high current density of >20 mA cm^-2 . In addition, the LiFePO₄ /Li full cell retains 86.3% of its capacity after 1000 cycles at a charge rate of 30 C.

Advanced Material Engineering to Tailor Nucleation and Growth towards Uniform Deposition for Anode-Less Lithium Metal Batteries

Anode-less lithium metal batteries (ALMBs), whether employing liquid or solid electrolytes, have significant advantages such as lowered costs and increased energy density over lithium metal batteries (LMBs). Among many issues, dendrite growth and non-uniform plating which results in poor coulombic efficiency are the key issues that viciously decrease the longevity of the ALMBs. As a result, lowering the nucleation barrier and facilitating lithium growth towards uniform plating is even more critical in ALMBs. While extensive reviews have focused to describe strategies to achieve high performance in LMBs and ALMBs, this review focuses on strategies designed to directly facilitate nucleation and growth of dendrite-free ALMBs. The review begins with a discussion of the primary components of ALMBs, followed by a brief theoretical analysis of the nucleation and growth mechanism for ALMBs. The review then emphasizes key examples for each strategy in order to highlight the mechanisms and rationale that facilitate lithium plating. By comparing the structure and mechanisms of key materials, the review discusses their benefits and drawbacks. Finally, major trends and key findings are summarized, as well as an outlook on the scientific and economic gaps in ALMBs.

Effect of current density on the solid electrolyte interphase formation at the lithium∣Li6PS5Cl interface

Understanding the chemical composition and morphological evolution of the solid electrolyte interphase (SEI) formed at the interface between the lithium metal electrode and an inorganic solid-state electrolyte is crucial for developing reliable all-solid-state lithium batteries. To better understand the interaction between these cell components, we carry out X-ray photoemission spectroscopy (XPS) measurements during lithium plating on the surface of a Li₆PS₅Cl solid-state electrolyte pellet using an electron beam. The analyses of the XPS data highlight the role of Li plating current density on the evolution of a uniform and ionically conductive (i.e., Li₃P-rich) SEI capable of decreasing the electrode∣solid electrolyte interfacial resistance. The XPS findings are validated via electrochemical impedance spectrsocopy measurements of all-solid-state lithium-based cells.

The void formation behaviors in working solid-state Li metal batteries

The fundamental understanding of the elusive evolution behavior of the buried solid-solid interfaces is the major barrier to exploring solid-state electrochemical devices. Here, we uncover the interfacial void evolution principles in solid-state batteries, build a solid-state void nucleation and growth model, and make an analogy with the bubble formation in liquid phases. In solid-state lithium metal batteries, the lithium stripping-induced interfacial void formation determines the morphological instabilities that result in battery failure. The void-induced contact loss processes are quantified in a phase diagram under wide current densities ranging from 1.0 to 10.0 milliamperes per square centimeter by rational electrochemistry calculations. The in situ-visualized morphological evolutions reveal the microscopic features of void defects under different stripping circumstances. The electrochemical-morphological relationship helps to elucidate the current density- and areal capacity-dependent void nucleation and growth mechanisms, which affords fresh insights on understanding and designing solid-solid interfaces for advanced solid-state batteries.

Serrated lithium fluoride nanofibers-woven interlayer enables uniform lithium deposition for lithium-metal batteries

The uncontrollable formation of Li dendrites has become the biggest obstacle to the practical application of Li-metal anodes in high-energy rechargeable Li batteries. Herein, a unique LiF interlayer woven by millimeter-level, single-crystal and serrated LiF nanofibers (NFs) was designed to enable dendrite-free and highly efficient Li-metal deposition. This high-conductivity LiF interlayer can increase the Li+ transference number and induce the formation of 'LiF-NFs-rich' solid-electrolyte interface (SEI). In the 'LiF-NFs-rich' SEI, the ultra-long LiF nanofibers provide a continuously interfacial Li+ transport path. Moreover, the formed Li-LiF interface between Li-metal and SEI film renders low Li nucleation and high Li+ migration energy barriers, leading to uniform Li plating and stripping processes. As a result, steady charge-discharge in a Li//Li symmetrical cell for 1600 h under 4 mAh cm-2 and 400 stable cycles under a high area capacity of 5.65 mAh cm-2 in a high-loading Li//rGO-S cell at 17.9 mA cm-2 could be achieved. The free-standing LiF-NFs interlayer exhibits superior advantages for commercial Li batteries and displays significant potential for expanding the applications in solid Li batteries.