Reactivities of Mononuclear Non-Heme Iron Intermediates Including Evidence that Iron(III)−Hydroperoxo Species Is a Sluggish Oxidant

Enhanced electron-transfer reactivity of nonheme manganese(IV)-oxo complexes by binding scandium ions

One and two scandium ions (Sc(3+)) are bound strongly to nonheme manganese(IV)-oxo complexes, [(N4Py)Mn(IV)(O)](2+) (N4Py = N,N-bis(2-pyridylmethyl)-N-bis(2-pyridyl)methylamine) and [(Bn-TPEN)Mn(IV)(O)](2+) (Bn-TPEN = N-benzyl-N,N',N'-tris(2-pyridylmethyl)-1,2-diaminoethane), to form Mn(IV)(O)-(Sc(3+))1 and Mn(IV)(O)-(Sc(3+))2 complexes, respectively. The binding of Sc(3+) ions to the Mn(IV)(O) complexes was examined by spectroscopic methods as well as by DFT calculations. The one-electron reduction potentials of the Mn(IV)(O) complexes were markedly shifted to a positive direction by binding of Sc(3+) ions. Accordingly, rates of the electron transfer reactions of the Mn(IV)(O) complexes were enhanced as much as 10(7)-fold by binding of two Sc(3+) ions. The driving force dependence of electron transfer from various electron donors to the Mn(IV)(O) and Mn(IV)(O)-(Sc(3+))2 complexes was examined and analyzed in light of the Marcus theory of electron transfer to determine the reorganization energies of electron transfer. The smaller reorganization energies and much more positive reduction potentials of the Mn(IV)(O)-(Sc(3+))2 complexes resulted in remarkable enhancement of the electron-transfer reactivity of the Mn(IV)(O) complexes. Such a dramatic enhancement of the electron-transfer reactivity of the Mn(IV)(O) complexes by binding of Sc(3+) ions resulted in the change of mechanism in the sulfoxidation of thioanisoles by Mn(IV)(O) complexes from a direct oxygen atom transfer pathway without metal ion binding to an electron-transfer pathway with binding of Sc(3+) ions.

A mononuclear non-heme high-spin iron(III)-hydroperoxo complex as an active oxidant in sulfoxidation reactions

We report the first direct experimental evidence showing that a high-spin iron(III)-hydroperoxo complex bearing an N-methylated cyclam ligand can oxidize thioanisoles. DFT calculations showed that the reaction pathway involves heterolytic O-O bond cleavage and that the choice of the heterolytic pathway versus the homolytic pathway is dependent on the spin state and the number of electrons in the d(xz) orbital of the Fe(III)-OOH species.

Rate-determining water-assisted O-O bond cleavage of an Fe(III)-OOH intermediate in a bio-inspired nonheme iron-catalyzed oxidation

Hydrocarbon oxidations by bio-inspired nonheme iron catalysts and H2O2 have been proposed to involve an Fe(III)-OOH intermediate that decays via a water-assisted mechanism to form an Fe(V)(O)(OH) oxidant. Herein we report kinetic evidence for this pathway in the oxidation of 1-octene catalyzed by [Fe(II)(TPA)(NCCH3)](2+) (1, TPA = tris(2-pyridylmethyl)amine). The (TPA)Fe(III)(OOH) intermediate 2 can be observed at -40 °C and is found to undergo first-order decay, which is accelerated by water. Interestingly, the decay rate of 2 is comparable to that of product formation, indicating that the decay of 2 results in olefin oxidation. Furthermore, the Eyring activation parameters for the decay of 2 and product formation are identical, and both processes are associated with an H2O/D2O KIE of 2.5. Taken together with previous (18)O-labeling data, these results point to a water-assisted heterolytic O-O bond cleavage of 2 as the rate-limiting step in olefin oxidation.

Comparison of high-spin and low-spin nonheme Fe(III)-OOH complexes in O-O bond homolysis and H-atom abstraction reactivities

The geometric and electronic structures and reactivity of an S = 5/2 (HS) mononuclear nonheme (TMC)Fe(III)-OOH complex are studied by spectroscopies, calculations, and kinetics and compared with the results of previous studies of S = 1/2 (LS) Fe(III)-OOH complexes to understand parallels and differences in mechanisms of O-O bond homolysis and electrophilic H-atom abstraction reactions. The homolysis reaction of the HS [(TMC)Fe(III)-OOH](2+) complex is found to involve axial ligand coordination and a crossing to the LS surface for O-O bond homolysis. Both HS and LS Fe(III)-OOH complexes are found to perform direct H-atom abstraction reactions but with very different reaction coordinates. For the LS Fe(III)-OOH, the transition state is late in O-O and early in C-H coordinates. However, for the HS Fe(III)-OOH, the transition state is early in O-O and further along in the C-H coordinate. In addition, there is a significant amount of electron transfer from the substrate to the HS Fe(III)-OOH at transition state, but that does not occur in the LS transition state. Thus, in contrast to the behavior of LS Fe(III)-OOH, the H-atom abstraction reactivity of HS Fe(III)-OOH is found to be highly dependent on both the ionization potential and the C-H bond strength of the substrate. LS Fe(III)-OOH is found to be more effective in H-atom abstraction for strong C-H bonds, while the higher reduction potential of HS Fe(III)-OOH allows it to be active in electrophilic reactions without the requirement of O-O bond cleavage. This is relevant to the Rieske dioxygenases, which are proposed to use a HS Fe(III)-OOH to catalyze cis-dihydroxylation of a wide range of aromatic compounds.

Reactivity of compound II: electronic structure analysis of methane hydroxylation by oxoiron(IV) porphyrin complexes

The methane hydroxylation reaction by a Compound II (Cpd II) mimic PorFe(IV)=O and its hydrosulfide-ligated derivative [Por(SH)Fe(IV)=O](-) is investigated by density functional theory (DFT) calculations on the ground triplet and excited quintet spin-state surfaces. On each spin surface both the σ- and π-channels are explored. H-abstraction is invariably the rate-determining step. In the case of PorFe(IV)=O the H-abstraction reaction can proceed either through the classic π-channel or through the nonclassical σ-channel on the triplet surface, but only through the classic σ-mechanism on the quintet surface. The barrier on the quintet σ-pathway is much lower than on the triplet channels so the quintet surface cuts through the triplet surfaces and a two state reactivity (TSR) mechanism with crossover from the triplet to the quintet surface becomes a plausible scenario for C-H bond activation by PorFe(IV)=O. In the case of the hydrosulfide-ligated complex the H-abstraction follows a π-mechanism on the triplet surface: the σ* is too high in energy to make a σ-attack of the substrate favorable. The σ- and π-channels are both feasible on the quintet surface. As the quintet surface lies above the triplet surface in the entrance channel of the oxidative process and is highly destabilized on both the σ- and π-pathways, the reaction can only proceed on the triplet surface. Insights into the electron transfer process accompanying the H-abstraction reaction are achieved through a detailed electronic structure analysis of the transition state species and the reactant complexes en route to the transition state. It is found that the electron transfer from the substrate σ(CH) into the acceptor orbital of the catalyst, the Fe-O σ* or π*, occurs through a rather complex mechanism that is initiated by a two-orbital four-electron interaction between the σ(CH) and the low-lying, oxygen-rich Fe-O σ-bonding and/or Fe-O π-bonding orbitals of the catalyst.

[Fe(IV)═O(TBC)(CH3CN)]2+: comparative reactivity of iron(IV)-oxo species with constrained equatorial cyclam ligation

[Fe(IV)═O(TBC)(CH(3)CN)](2+) (TBC = 1,4,8,11-tetrabenzyl-1,4,8,11-tetraazacyclotetradecane) is characterized, and its reactivity differences relative to [Fe(IV)═O(TMC)(CH(3)CN)](2+) (TMC = 1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecane) are evaluated in hydrogen atom (H-atom) abstraction and oxo-transfer reactions. Structural differences are defined using X-ray absorption spectroscopy and correlated to reactivities using density functional theory. The S = 1 ground states are highly similar and result in large activation barriers (~25 kcal/mol) due to steric interactions between the cyclam chelate and the substrate (e.g., ethylbenzene) associated with the equatorial π-attack required by this spin state. Conversely, H-atom abstraction reactivity on an S = 2 surface allows for a σ-attack with an axial substrate approach. This results in decreased steric interactions with the cyclam and a lower barrier (~9 kcal/mol). For [Fe(IV)═O(TBC)(CH(3)CN)](2+), the S = 2 excited state in the reactant is lower in energy and therefore more accessible at the transition state due to a weaker ligand field associated with the steric interactions of the benzyl substituents with the trans-axial ligand. This study is further extended to the oxo-transfer reaction, which is a two-electron process requiring both σ- and π-electron transfer and thus a nonlinear transition state. In oxo-transfer, the S = 2 has a lower barrier due to sequential vs concerted (S = 1) two electron transfer which gives a high-spin ferric intermediate at the transition state. The [Fe(IV)═O(TBC)(CH(3)CN)](2+) complex is more distorted at the transition state, with the iron farther out of the equatorial plane due to the steric interaction of the benzyl groups with the trans-axial ligand. This allows for better orbital overlap with the substrate, a lower barrier, and an increased rate of oxo-transfer.

Oxygen atom transfer mediated by an iron(IV)/iron(II) macrocyclic complex containing pyridine and tertiary amine donors

A new non-heme iron model complex containing a high-spin iron(II) complexed with N-methylated pyridine-containing macrocycle was synthesized and crystallographically characterized. The complex generates peroxo- and high-valent iron-oxo intermediates in reactions with tert-butylhydroperoxide and isopropyl 2-iodoxybenzoate, respectively, allowing to gain insight into the formation and reactivity of enzyme-like intermediates related to biological oxygen activation. The formation and reactivity of these intermediate species were investigated by the stopped-flow methodology. The mechanism of oxygen transfer to organic substrates involving reaction of oxoiron(IV) intermediate was elucidated on the basis of spectroscopic and kinetic data. Incorporation of a pyridine ring into the macrocycle increased the reactivity of the Fe(IV)=O intermediates in comparison with polyamine tetraaza macrocyclic complexes: ferryl (Fe(IV)=O) species derived from 3 demonstrated electrophilic reactivity in transferring an oxygen atom to substituted triarylphosphines and to olefins (such as cyclooctene). However, iron(III) alkylperoxo intermediate was unreactive with cyclooctene.

Role of Fe(IV)-oxo intermediates in stoichiometric and catalytic oxidations mediated by iron pyridine-azamacrocycles

An iron(II) complex with a pyridine-containing 14-membered macrocyclic (PyMAC) ligand L1 (L1 = 2,7,12-trimethyl-3,7,11,17-tetra-azabicyclo[11.3.1]heptadeca-1(17),13,15-triene), 1, was prepared and characterized. Complex 1 contains low-spin iron(II) in a pseudo-octahedral geometry as determined by X-ray crystallography. Magnetic susceptibility measurements (298 K, Evans method) and Mössbauer spectroscopy (90 K, δ = 0.50(2) mm/s, ΔE(Q) = 0.78(2) mm/s) confirmed that the low-spin configuration of Fe(II) is retained in liquid and frozen acetonitrile solutions. Cyclic voltammetry revealed a reversible one-electron oxidation/reduction of the iron center in 1, with E(1/2)(Fe(III)/Fe(II)) = 0.49 V vs Fc(+)/Fc, a value very similar to the half-wave potentials of related macrocyclic complexes. Complex 1 catalyzed the epoxidation of cyclooctene and other olefins with H(2)O(2). Low-temperature stopped-flow kinetic studies demonstrated the formation of an iron(IV)-oxo intermediate in the reaction of 1 with H(2)O(2) and concomitant partial ligand oxidation. A soluble iodine(V) oxidant, isopropyl 2-iodoxybenzoate, was found to be an excellent oxygen atom donor for generating Fe(IV)-oxo intermediates for additional spectroscopic (UV-vis in CH(3)CN: λ(max) = 705 nm, ε ≈ 240 M(-1) cm(-1); Mössbauer: δ = 0.03(2) mm/s, ΔE(Q) = 2.00(2) mm/s) and kinetic studies. The electrophilic character of the (L1)Fe(IV)═O intermediate was established in rapid (k(2) = 26.5 M(-1) s(-1) for oxidation of PPh(3) at 0 °C), associative (ΔH(‡) = 53 kJ/mol, ΔS(‡) = -25 J/K mol) oxidation of substituted triarylphosphines (electron-donating substituents increased the reaction rate, with a negative value of Hammet's parameter ρ = -1.05). Similar double-mixing kinetic experiments demonstrated somewhat slower (k(2) = 0.17 M(-1) s(-1) at 0 °C), clean, second-order oxidation of cyclooctene into epoxide with preformed (L1)Fe(IV)═O that could be generated from (L1)Fe(II) and H(2)O(2) or isopropyl 2-iodoxybenzoate. Independently determined rates of ferryl(IV) formation and its subsequent reaction with cyclooctene confirmed that the Fe(IV)-oxo species, (L1)Fe(IV)═O, is a kinetically competent intermediate for cyclooctene epoxidation with H(2)O(2) at room temperature. Partial ligand oxidation of (L1)Fe(IV)═O occurs over time in oxidative media, reducing the oxidizing ability of the ferryl species; the macrocyclic nature of the ligand is retained, resulting in ferryl(IV) complexes with Schiff base PyMACs. NH-groups of the PyMAC ligand assist the oxygen atom transfer from ferryl(IV) intermediates to olefin substrates.

Coupled electron transfer and proton hopping in the final step of CYP19-catalyzed androgen aromatization

Aromatase (CYP19) catalyzes the terminal step in estrogen biosynthesis, which requires three separate oxidation reactions, culminating in an enigmatic aromatization that converts an androgen to an estrogen. A stable ferric peroxo (Fe(3+)O(2)(2-)) intermediate is seen by electron paramagnetic resonance, but its role in this complex reaction remains controversial. Combining molecular dynamics simulation and hybrid quantum mechanics/molecular mechanics, we show that ferric peroxo addition to the 19-aldehyde initiates the reaction. Stepwise cleavage of the C10-C19 and O-O bonds of the peroxohemiacetal extrudes formate and yields Compound II, which in turn desaturates the steroid through successive abstraction of the 1β-hydrogen atom and deprotonation of the 2β-position. Throughout the transformation, a proton is cyclically relayed between D309 and the substrate to stabilize reaction intermediates. This mechanism invokes novel oxygen intermediates and provides a unifying interpretation of past experimental mechanistic studies.

A highly reactive mononuclear non-heme manganese(IV)-oxo complex that can activate the strong C-H bonds of alkanes

A mononuclear non-heme manganese(IV)-oxo complex has been synthesized and characterized using various spectroscopic methods. The Mn(IV)-oxo complex shows high reactivity in oxidation reactions, such as C-H bond activation, oxidations of olefins, alcohols, sulfides, and aromatic compounds, and N-dealkylation. In C-H bond activation, the Mn(IV)-oxo complex can activate C-H bonds as strong as those in cyclohexane. It is proposed that C-H bond activation by the non-heme Mn(IV)-oxo complex does not occur via an oxygen-rebound mechanism. The electrophilic character of the non-heme Mn(IV)-oxo complex is demonstrated by a large negative ρ value of -4.4 in the oxidation of para-substituted thioanisoles.

EPR, 1H and 2H NMR, and reactivity studies of the iron-oxygen intermediates in bioinspired catalyst systems

Complexes [(BPMEN)Fe(II)(CH(3)CN)(2)](ClO(4))(2) (1, BPMEN = N,N'-dimethyl-N,N'-bis(2-pyridylmethyl)-1,2-diaminoethane) and [(TPA)Fe(II)(CH(3)CN)(2)](ClO(4))(2) (2, TPA = tris(2-pyridylmethyl)amine) are among the best nonheme iron-based catalysts for bioinspired oxidation of hydrocarbons. Using EPR and (1)H and (2)H NMR spectroscopy, the iron-oxygen intermediates formed in the catalyst systems 1,2/H(2)O(2); 1,2/H(2)O(2)/CH(3)COOH; 1,2/CH(3)CO(3)H; 1,2/m-CPBA; 1,2/PhIO; 1,2/(t)BuOOH; and 1,2/(t)BuOOH/CH(3)COOH have been studied (m-CPBA is m-chloroperbenzoic acid). The following intermediates have been observed: [(L)Fe(III)(OOR)(S)](2+), [(L)Fe(IV)═O(S)](2+) (L = BPMEN or TPA, R = H or (t)Bu, S = CH(3)CN or H(2)O), and the iron-oxygen species 1c (L = BPMEN) and 2c (L = TPA). It has been shown that 1c and 2c directly react with cyclohexene to yield cyclohexene oxide, whereas [(L)Fe(IV)═O(S)](2+) react with cyclohexene to yield mainly products of allylic oxidation. [(L)Fe(III)(OOR)(S)](2+) are inert in this reaction. The analysis of EPR and reactivity data shows that only those catalyst systems which display EPR spectra of 1c and 2c are able to selectively epoxidize cyclohexene, thus bearing strong evidence in favor of the key role of 1c and 2c in selective epoxidation. 1c and 2c were tentatively assigned to the oxoiron(V) intermediates.

Catalytic reduction of dioxygen to water with a monomeric manganese complex at room temperature

There have been numerous efforts to incorporate dioxygen into chemical processes because of its economic and environmental benefits. The conversion of dioxygen to water is one such example, having importance in both biology and fuel cell technology. Metals or metal complexes are usually necessary to promote this type of reaction and several systems have been reported. However, mechanistic insights into this conversion are still lacking, especially the detection of intermediates. Reported herein is the first example of a monomeric manganese(II) complex that can catalytically convert dioxygen to water. The complex contains a tripodal ligand with two urea groups and one carboxyamidopyridyl unit; this ligand creates an intramolecular hydrogen-bonding network within the secondary coordination sphere that aids in the observed chemistry. The manganese(II) complex is five-coordinate with an N(4)O primary coordination sphere; the oxygen donor comes from the deprotonated carboxyamido moiety. Two key intermediates were detected and characterized: a peroxo-manganese(III) species and a hybrid oxo/hydroxo-manganese(III) species (1). The formulation of 1 was based on spectroscopic and analytical data, including an X-ray diffraction analysis. Reactivity studies showed dioxygen was catalytically converted to water in the presence of reductants, such as diphenylhydrazine and hydrazine. Water was confirmed as a product in greater than 90% yield. A mechanism was proposed that is consistent with the spectroscopy and product distribution, in which the carboxyamido group switches between a coordinated ligand and a basic site to scavenge protons produced during the catalytic cycle. These results highlight the importance of incorporating intramolecular functional groups within the secondary coordination sphere of metal-containing catalysts.

X-ray absorption spectroscopy and reactivity of thiolate-ligated Fe(III)-OOR complexes

The reaction of a series of thiolate-ligated iron(II) complexes [Fe(II)([15]aneN(4))(SC(6)H(5))]BF(4) (1), [Fe(II)([15]aneN(4))(SC(6)H(4)-p-Cl)]BF(4) (2), and [Fe(II)([15]aneN(4))(SC(6)H(4)-p-NO(2))]BF(4) (3) with alkylhydroperoxides at low temperature (-78 °C or -40 °C) leads to the metastable alkylperoxo-iron(III) species [Fe(III)([15]aneN(4))(SC(6)H(5))(OOtBu)]BF(4) (1a), [Fe(III)([15]aneN(4))(SC(6)H(4)-p-Cl)(OOtBu)]BF(4) (2a), and [Fe(III)([15]aneN(4))(SC(6)H(4)-p-NO(2))(OOtBu)]BF(4) (3a), respectively. X-ray absorption spectroscopy (XAS) studies were conducted on the Fe(III)-OOR complexes and their iron(II) precursors. The edge energy for the iron(II) complexes (∼7118 eV) shifts to higher energy upon oxidation by ROOH, and the resulting edge energies for the Fe(III)-OOR species range from 7121-7125 eV and correlate with the nature of the thiolate donor. Extended X-ray absorption fine structure (EXAFS) analysis of the iron(II) complexes 1-3 in CH(2)Cl(2) show that their solid state structures remain intact in solution. The EXAFS data on 1a-3a confirm their proposed structures as mononuclear, 6-coordinate Fe(III)-OOR complexes with 4N and 1S donors completing the coordination sphere. The Fe-O bond distances obtained from EXAFS for 1a-3a are 1.82-1.85 Å, significantly longer than other low-spin Fe(III)-OOR complexes. The Fe-O distances correlate with the nature of the thiolate donor, in agreement with the previous trends observed for ν(Fe-O) from resonance Raman (RR) spectroscopy, and supported by optimized geometries obtained from density functional theory (DFT) calculations. Reactivity and kinetic studies on 1a- 3a show an important influence of the thiolate donor.

Aromatic hydroxylation at a non-heme iron center: observed intermediates and insights into the nature of the active species

Mechanism of substrate oxidations with hydrogen peroxide in the presence of a highly reactive, biomimetic, iron aminopyridine complex, [Fe(II)(bpmen)(CH(3)CN)(2)][ClO(4)](2) (1; bpmen=N,N'-dimethyl-N,N'-bis(2-pyridylmethyl)ethane-1,2-diamine), is elucidated. Complex 1 has been shown to be an excellent catalyst for epoxidation and functional-group-directed aromatic hydroxylation using H(2)O(2), although its mechanism of action remains largely unknown. Efficient intermolecular hydroxylation of unfunctionalized benzene and substituted benzenes with H(2)O(2) in the presence of 1 is found in the present work. Detailed mechanistic studies of the formation of iron(III)-phenolate products are reported. We have identified, generated in high yield, and experimentally characterized the key Fe(III)(OOH) intermediate (λ(max)=560 nm, rhombic EPR signal with g=2.21, 2.14, 1.96) formed by 1 and H(2)O(2). Stopped-flow kinetic studies showed that Fe(III)(OOH) does not directly hydroxylate the aromatic rings, but undergoes rate-limiting self-decomposition producing transient reactive oxidant. The formation of the reactive species is facilitated by acid-assisted cleavage of the O-O bond in the iron-hydroperoxide intermediate. Acid-assisted benzene hydroxylation with 1 and a mechanistic probe, 2-Methyl-1-phenyl-2-propyl hydroperoxide (MPPH), correlates with O-O bond heterolysis. Independently generated Fe(IV)=O species, which may originate from O-O bond homolysis in Fe(III)(OOH), proved to be inactive toward aromatic substrates. The reactive oxidant derived from 1 exchanges its oxygen atom with water and electrophilically attacks the aromatic ring (giving rise to an inverse H/D kinetic isotope effect of 0.8). These results have revealed a detailed experimental mechanistic picture of the oxidation reactions catalyzed by 1, based on direct characterization of the intermediates and products, and kinetic analysis of the individual reaction steps. Our detailed understanding of the mechanism of this reaction revealed both similarities and differences between synthetic and enzymatic aromatic hydroxylation reactions.

Modeling the cis-oxo-labile binding site motif of non-heme iron oxygenases: water exchange and oxidation reactivity of a non-heme iron(IV)-oxo compound bearing a tripodal tetradentate ligand

The spectroscopic and chemical characterization of a new synthetic non-heme iron(IV)-oxo species [Fe(IV)(O)((Me,H) Pytacn)(S)](2+) (2, (Me,H)Pytacn=1-(2'-pyridylmethyl)-4,7-dimethyl-1,4,7-triazacyclononane, S=CH(3)CN or H(2)O) is described. Complex 2 was prepared by reaction of [Fe(II)(CF(3)SO(3))(2)((Me,H) Pytacn)] (1) with peracetic acid. Complex 2 bears a tetradentate N(4) ligand that leaves two cis sites available for binding an oxo group and a second external ligand but, unlike the related iron(IV)-oxo species with tetradentate ligands, it is remarkably stable at room temperature (t(1/2)>2 h at 288 K). Its ability to exchange the oxygen atom of the oxo ligand with water has been analyzed in detail by means of kinetic studies, and a mechanism is proposed on the basis of DFT calculations. Hydrogen-atom abstraction from C-H bonds and oxygen-atom transfer to sulfides by 2 have also been studied. Despite its thermal stability, 2 proves to be a very powerful oxidant that is capable of breaking the strong C-H bond of cyclohexane (bond dissociation energy=99.3 kcal mol(-1)).

Dioxygen activation by a non-heme iron(II) complex: formation of an iron(IV)-oxo complex via C-H activation by a putative iron(III)-superoxo species

Iron(III)-superoxo intermediates are believed to play key roles in oxygenation reactions by non-heme iron enzymes. We now report that a non-heme iron(II) complex activates O(2) and generates its corresponding iron(IV)-oxo complex in the presence of substrates with weak C-H bonds (e.g., olefins and alkylaromatic compounds). We propose that a putative iron(III)-superoxo intermediate initiates the O(2)-activation chemistry by abstracting a H atom from the substrate, with subsequent generation of a high-valent iron(IV)-oxo intermediate from the resulting iron(III)-hydroperoxo species.

Crystallographic snapshots of the reaction of aromatic C-H with O(2) catalysed by a protein-bound iron complex

Chemical reactions inside single crystals are quite rare because crystallinity is difficult to retain owing to atomic rearrangements. Protein crystals in general have a high solvent content. This allows for some molecular flexibility, which makes it possible to trap reaction intermediates of enzymatic reactions without disrupting the crystal lattice. A similar approach has not yet been fully implemented in the field of inorganic chemistry. Here, we have combined model chemistry and protein X-ray crystallography to study the intramolecular aromatic dihydroxylation by an arene-containing protein-bound iron complex. The bound complex was able to activate dioxygen in the presence of a reductant, leading to the formation of catechol as the sole product. The structure determination of four of the catalytic cycle intermediates and the end product showed that the hydroxylation reaction implicates an iron peroxo, generated by reductive O(2) activation, an intermediate already observed in iron monooxygenases. This strategy also provided unexpected mechanistic details such as the rearrangement of the iron coordination sphere on metal reduction.