Site-Specific Insertion of 3-Aminotyrosine into Subunit α2 of E. coli Ribonucleotide Reductase: Direct Evidence for Involvement of Y730 and Y731 in Radical Propagation

Proton-coupled electron transfer in biology: results from synergistic studies in natural and model systems

Proton-coupled electron transfer (PCET) underpins energy conversion in biology. PCET may occur with the unidirectional or bidirectional transfer of a proton and electron and may proceed synchronously or asynchronously. To illustrate the role of PCET in biology, this review presents complementary biological and model systems that explore PCET in electron transfer (ET) through hydrogen bonds [azurin as compared to donor-acceptor (D-A) hydrogen-bonded networks], the activation of C-H bonds [alcohol dehydrogenase and soybean lipoxygenase (SLO) as compared to Fe(III) metal complexes], and the generation and transport of amino acid radicals [photosystem II (PSII) and ribonucleotide reductase (RNR) as compared to tyrosine-modified photoactive Re(I) and Ru(II) complexes]. In providing these comparisons, the fundamental principles of PCET in biology are illustrated in a tangible way.

Redox-linked structural changes in ribonucleotide reductase

Ribonucleotide reductase (RNR) catalyzes the reduction of ribonucleotides to deoxyribonucleotides. Class I RNRs are composed of two homodimeric proteins, alpha2 and beta2. The class Ia E. coli beta2 contains dinuclear, antiferromagnetically coupled iron centers and one tyrosyl free radical, Y122*/beta2. Y122* acts as a radical initiator in catalysis. Redox-linked conformational changes may accompany Y122 oxidation and provide local control of proton-coupled electron transfer reactions. To test for such redox-linked structural changes, FT-IR spectroscopy was employed in this work. Reaction-induced difference spectra, associated with the reduction of Y122* by hydroxyurea, were acquired from natural abundance, (2)H(4) tyrosine, and (15)N tyrosine labeled beta2 samples. Isotopic labeling led to the assignment of a 1514 cm(-1) band to the upsilon19a ring stretching vibration of Y122 and of a 1498 cm(-1) band to the upsilon7a CO stretching vibration of Y122*. The reaction-induced spectra also exhibited amide I bands, at 1661 and 1652 cm(-1). A similar set of amide I bands, with frequencies of 1675 and 1651 cm(-1), was observed when Y* was generated by photolysis in a pentapeptide, which matched the primary sequence surrounding Y122. This result suggests that reduction of Y122* is linked with structural changes at nearby amide bonds and that this perturbation is mediated by the primary sequence. To explain these data, we propose that a structural perturbation of the amide bond is driven by redox-linked electrostatic changes in the tyrosyl radical aromatic ring.

Electron transfer in peptides and proteins

Electron transfer (ET) processes in proteins drive the energy conversion processes in cells and are also involved in metabolic catalysis. In this tutorial review, the models explaining ET through peptides and proteins are discussed and the biological relevance of ET is elucidated.

Protein engineering of redox-active enzymes

Redox-active enzymes perform many key biological reactions. The electron transfer process is complex, not only because of its versatility, but also because of the intricate and delicate modulation exerted by the protein scaffold on the redox properties of the catalytic sites. Nowadays, there is a wealth of information available about the catalytic mechanisms of redox-active enzymes and the time is propitious for the development of projects based on the protein engineering of redox-active enzymes. In this review, we aim to provide an updated account of the available methods used for protein engineering, including both genetic and chemical tools, which are usually reviewed separately. Specific applications to redox-active enzymes are mentioned within each technology, with emphasis on those cases where the generation of novel functionality was pursued. Finally, we focus on two emerging fields in the protein engineering of redox-active enzymes: the construction of novel nucleic acid-based catalysts and the remodeling of intra-molecular electron transfer networks. We consider that the future development of these areas will represent fine examples of the concurrence of chemical and genetic tools.

Formation and function of the Manganese(IV)/Iron(III) cofactor in Chlamydia trachomatis ribonucleotide reductase

The beta(2) subunit of a class Ia or Ib ribonucleotide reductase (RNR) is activated when its carboxylate-bridged Fe(2)(II/II) cluster reacts with O(2) to oxidize a nearby tyrosine (Y) residue to a stable radical (Y(*)). During turnover, the Y(*) in beta(2) is thought to reversibly oxidize a cysteine (C) in the alpha(2) subunit to a thiyl radical (C(*)) by a long-distance ( approximately 35 A) proton-coupled electron-transfer (PCET) step. The C(*) in alpha(2) then initiates reduction of the 2' position of the ribonucleoside 5'-diphosphate substrate by abstracting the hydrogen atom from C3'. The class I RNR from Chlamydia trachomatis (Ct) is the prototype of a newly recognized subclass (Ic), which is characterized by the presence of a phenylalanine (F) residue at the site of beta(2) where the essential radical-harboring Y is normally found. We recently demonstrated that Ct RNR employs a heterobinuclear Mn(IV)/Fe(III) cluster for radical initiation. In essence, the Mn(IV) ion of the cluster functionally replaces the Y(*) of the conventional class I RNR. The Ct beta(2) protein also autoactivates by reaction of its reduced (Mn(II)/Fe(II)) metal cluster with O(2). In this reaction, an unprecedented Mn(IV)/Fe(IV) intermediate accumulates almost stoichiometrically and decays by one-electron reduction of the Fe(IV) site. This reduction is mediated by the near-surface residue, Y222, a residue with no functional counterpart in the well-studied conventional class I RNRs. In this review, we recount the discovery of the novel Mn/Fe redox cofactor in Ct RNR and summarize our current understanding of how it assembles and initiates nucleotide reduction.

The manganese(IV)/iron(III) cofactor of Chlamydia trachomatis ribonucleotide reductase: structure, assembly, radical initiation, and evolution

The catalytic mechanism of a class I ribonucleotide reductase (RNR) is initiated by the generation of a hydrogen-abstracting thiyl radical via a conformationally gated, proton-coupled electron-transfer (PCET) from a cysteine residue in the alpha(2) subunit over approximately 35A to the cofactor in the beta(2) subunit. A chain of aromatic amino acids that spans the two subunits mediates this long-distance PCET by the formation of transient side-chain radicals. Details of the conformational gating, proton coupling, and 'radical-hopping' have, until very recently, been largely obscured by the failure of intermediate states to accumulate to high levels and the absence of sufficiently sensitive spectroscopic handles for intermediates that may accumulate to trace levels. In the most recently recognized subclass (c) of class I, founded by the enzyme from Chlamydia trachomatis (Ct), the stable tyrosyl radical that serves as the PCET acceptor in the conventional (subclass a or b) class I RNRs is functionally replaced by the Mn(IV) ion of a Mn(IV)/Fe(III) cofactor, which assembles in Ct beta(2) in place of the Fe(2)(III/III) cluster of the conventional beta(2)s. The discovery of this novel radical-initiation cofactor and mechanism has raised intriguing questions concerning the evolution of class I RNRs and affords new opportunities for understanding the gated PCET step that initiates their catalytic mechanism.

Mapping the subunit interface of ribonucleotide reductase (RNR) using photo cross-linking

Escherichia coli ribonucleotide reductase (RNR) catalyzes the conversion of nucleoside 5'-diphosphates to deoxynucleoside 5'-diphosphates and is a 1:1 complex of two homodimeric subunits: alpha2 and beta2. As a first step towards mapping the subunit interface, beta2 (V365C) was labeled with [(14)C]-benzophenone (BP) iodoacetamide. The resulting [(14)C]-BP-beta2 (V365C) was complexed with alpha2 and irradiated at 365nm for 30min at 4 degrees C. The cross-linked mixture was purified by anion exchange chromatography and digested with trypsin. The peptides were purified by reverse phase chromatography, identified by scintillation counting and analyzed by Edman sequencing. Three [(14)C]-labeled peptides were identified: two contained a peptide in beta to which the BP was attached. The third contained the same beta peptide and a peptide in alpha found in its alphaD helix. These results provide direct support for the proposed docking model of alpha2beta2.

Site-specific incorporation of chemical probes into proteins for NMR

The ability to incorporate chemical probes into peptides is of great importance because it can render novel functionality to proteins and greatly expand our capacity to investigate complex biological systems. A methodology developed by the Schultz laboratory provides a unique strategy to incorporate chemical probes as unnatural amino acids into proteins by "expanding the genetic code" of the host cell. A recent application of this methodology that allows the site-specific incorporation of three NMR-active probes into proteins demonstrates the potential for researchers to explore avenues that are not easily achievable with existing methods.

Electron transfer in peptides and proteins

Proteins and peptides use their amino acids as medium for electron-transfer reactions that occur either in single-step superexchange or in multistep hopping processes. Whereas the rate of the single-step electron transfer dramatically decreases with the distance, a hopping process is less distance dependent. Electron hopping is possible if amino acids carry oxidizable side chains, like the phenol group in tyrosine. These side chains become intermediate charge carriers. Because of the weak distance dependency of hopping processes, fast electron transfer over very long distances occurs in multistep reactions, as in the enzyme ribonucleotide reductase.

Branched activation- and catalysis-specific pathways for electron relay to the manganese/iron cofactor in ribonucleotide reductase from Chlamydia trachomatis

A conventional class I (subclass a or b) ribonucleotide reductase (RNR) employs a tyrosyl radical (Y (*)) in its R2 subunit for reversible generation of a 3'-hydrogen-abstracting cysteine radical in its R1 subunit by proton-coupled electron transfer (PCET) through a network of aromatic amino acids spanning the two subunits. The class Ic RNR from the human pathogen Chlamydia trachomatis ( Ct) uses a Mn (IV)/Fe (III) cofactor (specifically, the Mn (IV) ion) in place of the Y (*) for radical initiation. Ct R2 is activated when its Mn (II)/Fe (II) form reacts with O 2 to generate a Mn (IV)/Fe (IV) intermediate, which decays by reduction of the Fe (IV) site to the active Mn (IV)/Fe (III) state. Here we show that the reduction step in this sequence is mediated by residue Y222. Substitution of Y222 with F retards the intrinsic decay of the Mn (IV)/Fe (IV) intermediate by approximately 10-fold and diminishes the ability of ascorbate to accelerate the decay by approximately 65-fold but has no detectable effect on the catalytic activity of the Mn (IV)/Fe (III)-R2 product. By contrast, substitution of Y338, the cognate of the subunit interfacial R2 residue in the R1 <--> R2 PCET pathway of the conventional class I RNRs [Y356 in Escherichia coli ( Ec) R2], has almost no effect on decay of the Mn (IV)/Fe (IV) intermediate but abolishes catalytic activity. Substitution of W51, the Ct R2 cognate of the cofactor-proximal R1 <--> R2 PCET pathway residue in the conventional class I RNRs (W48 in Ec R2), both retards reduction of the Mn (IV)/Fe (IV) intermediate and abolishes catalytic activity. These observations imply that Ct R2 has evolved branched pathways for electron relay to the cofactor during activation and catalysis. Other R2s predicted also to employ the Mn/Fe cofactor have Y or W (also competent for electron relay) aligning with Y222 of Ct R2. By contrast, many R2s known or expected to use the conventional Y (*)-based system have redox-inactive L or F residues at this position. Thus, the presence of branched activation- and catalysis-specific electron relay pathways may be functionally important uniquely in the Mn/Fe-dependent class Ic R2s.