N2 functionalization at iron metallaboratranes

Evaluating molecular cobalt complexes for the conversion of N2 to NH3

Well-defined molecular catalysts for the reduction of N2 to NH3 with protons and electrons remain very rare despite decades of interest and are currently limited to systems featuring molybdenum or iron. This report details the synthesis of a molecular cobalt complex that generates superstoichiometric yields of NH3 (>200% NH3 per Co-N2 precursor) via the direct reduction of N2 with protons and electrons. While the NH3 yields reported herein are modest by comparison to those of previously described iron and molybdenum systems, they intimate that other metals are likely to be viable as molecular N2 reduction catalysts. Additionally, a comparison of the featured tris(phosphine)borane Co-N2 complex with structurally related Co-N2 and Fe-N2 species shows how remarkably sensitive the N2 reduction performance of potential precatalysts is. These studies enable consideration of the structural and electronic effects that are likely relevant to N2 conversion activity, including the π basicity, charge state, and geometric flexibility.

Nitrogen fixation revisited on iron(0) dinitrogen phosphine complexes

A reinvestigation of the treatment of [Fe(N2)(PP)2] (PP = depe, dmpe) with acid revealed no ammonium formation. Instead, rapid protonation at the metal center to give hydride complexes was observed. Treatment of [Fe(N2)(dmpe)2] with methylating agents such as methyl triflate or methyl tosylate resulted in methylation of the metal center to afford [FeMe(N2)(dmpe)2](+). Treatment of [Fe(N2)(dmpe)2] with trimethylsilyl triflate, however, resulted in reaction at dinitrogen affording NH4(+) on subsequent treatment with acid. The side-on bound hydrazine complex [Fe(N2H4)(dmpe)2](2+) and bis(ammonia) complex [Fe(NH3)2(dmpe)2](2+) were identified by (15)N NMR spectroscopy as other species formed in the reaction mixture.

Low-temperature N2 binding to two-coordinate L2Fe(0) enables reductive trapping of L2FeN2(-) and NH3 generation

The two-coordinate [(CAAC)2Fe] complex [CAAC = cyclic (alkyl)(amino)carbene] binds dinitrogen at low temperature (T<-80 °C). The resulting putative three-coordinate N2 complex, [(CAAC)2Fe(N2)], was trapped by one-electron reduction to its corresponding anion [(CAAC)2FeN2](-) at low temperature. This complex was structurally characterized and features an activated dinitrogen unit which can be silylated at the β-nitrogen atom. The redox-linked complexes [(CAAC)2Fe(I)][BAr(F)4], [(CAAC)2Fe(0)], and [(CAAC)2Fe(-I)N2](-) were all found to be active for the reduction of dinitrogen to ammonia upon treatment with KC8 and HBAr(F)4⋅2 Et2O at -95 °C [up to (3.4±1.0) equivalents of ammonia per Fe center]. The N2 reduction activity is highly temperature dependent, with significant N2 reduction to NH3 only occurring below -78 °C. This reactivity profile tracks with the low temperatures needed for N2 binding and an otherwise unavailable electron-transfer step to generate reactive [(CAAC)2FeN2](-) .

Synthesis and structure of Ag(i), Pd(ii), Rh(i), Ru(ii) and Au(i) NHC-complexes with a pendant Lewis acidic boronic ester moiety

Synthesis and characterization of novel NHC-boronic ester ligands and their corresponding TM-complexes.

Nitrogenase and homologs

Nitrogenase catalyzes biological nitrogen fixation, a key step in the global nitrogen cycle. Three homologous nitrogenases have been identified to date, along with several structural and/or functional homologs of this enzyme that are involved in nitrogenase assembly, bacteriochlorophyll biosynthesis and methanogenic process, respectively. In this article, we provide an overview of the structures and functions of nitrogenase and its homologs, which highlights the similarity and disparity of this uniquely versatile group of enzymes.

Air-stable cationic gold(I) catalyst featuring a Z-type ligand: promoting enyne cyclizations

An air-stable cationic Au(I) complex featuring a Z-type ligand (boron atom) as a σ-acceptor was developed for elucidating the effect of B on catalytic reactions. An enyne cyclization in the presence of either [Au→B](+) or [Au](+) showed that [Au→B](+) promotes the reactivity, which enabled the effective construction of not only five- and six-membered rings, but also seven-membered rings.

Platinum complexes of a borane-appended analogue of 1,1'-bis(diphenylphosphino)ferrocene: flexible borane coordination modes and in situ vinylborane formation

A bis(phosphine)borane ambiphilic ligand, [Fe(η(5) -C5 H4 PPh2 )(η(5) -C5 H4 PtBu{C6 H4 (BPh2 )-ortho})] (FcPPB), in which the borane occupies a terminal position, was prepared. Reaction of FcPPB with tris(norbornene)platinum(0) provided [Pt(FcPPB)] (1) in which the arylborane is η(3) BCC-coordinated. Subsequent reaction with CO and CNXyl (Xyl=2,6-dimethylphenyl) afforded [PtL(FcPPB)] {L=CO (2) and CNXyl (3)} featuring η(2) BC- and η(1) B-arylborane coordination modes, respectively. Reaction of 1 or 2 with H2 yielded [PtH(μ-H)(FcPPB)] in which the borane is bound to a hydride ligand on platinum. Addition of PhC2 H to [Pt(FcPPB)] afforded [Pt(C2 Ph)(μ-H)(FcPPB)] (5), which rapidly converted to [Pt(FcPPB')] (6; FcPPB'=[Fe(η(5) -C5 H4 PPh2 )(η(5) -C5 H4 PtBu{C6 H4 (BPh-CPh=CHPh-Z)-ortho}]) in which the newly formed vinylborane is η(3) BCC-coordinated. Unlike arylborane complex 1, vinylborane complex 6 does not react with CO, CNXyl, H2 or HC2 Ph at room temperature.

Catalytic reduction of N2 to NH3 by an Fe-N2 complex featuring a C-atom anchor

While recent spectroscopic studies have established the presence of an interstitial carbon atom at the center of the iron-molybdenum cofactor (FeMoco) of MoFe-nitrogenase, its role is unknown. We have pursued Fe-N2 model chemistry to explore a hypothesis whereby this C-atom (previously denoted as a light X-atom) may provide a flexible trans interaction with an Fe center to expose an Fe-N2 binding site. In this context, we now report on Fe complexes of a new tris(phosphino)alkyl (CP(iPr)3) ligand featuring an axial carbon donor. It is established that the iron center in this scaffold binds dinitrogen trans to the C(alkyl)-atom anchor in three distinct and structurally characterized oxidation states. Fe-C(alkyl) lengthening is observed upon reduction, reflective of significant ionic character in the Fe-C(alkyl) interaction. The anionic (CP(iPr)3)FeN2(-) species can be functionalized by a silyl electrophile to generate (CP(iPr)3)Fe-N2SiR3. (CP(iPr)3)FeN2(-) also functions as a modest catalyst for the reduction of N2 to NH3 when supplied with electrons and protons at -78 °C under 1 atm N2 (4.6 equiv NH3/Fe).

Multimetallic Cooperativity in Activation of Dinitrogen at Iron-Potassium Sites

The reaction of soluble iron-oxygen-potassium assemblies with N₂ gives insight into the mechanisms of multimetallic N₂ coordination. We report a series of very electron-rich three-coordinate, β-diketiminate-supported iron(I) phenoxide complexes, which are metastable but have been characterized under Ar by both crystallography and solution methods. Both monomeric and dimeric Fe-OPh-K compounds have been characterized, and their iron environments are very similar in the solid and solution states. In the dimer, potassium ions hold together the phenoxide oxygens and aryl rings of the two halves, to give a flexible diiron core. The reactions of the monomeric and dimeric iron(I) compounds with N₂ are surprisingly different: the mononuclear iron(I) complexes give no reaction with N₂, but the dimeric Fe₂K₂ complex reacts rapidly to give a diiron-N₂ product. Computational studies show that the key to the rapid N₂ reaction of the dimer is the preorganization of the two iron atoms. Thus, cooperation between Fe (which weakens the N-N bond) and K (which orients the Fe atoms) can be used to create a low-energy pathway for N₂ reactions.

Catalytic conversion of nitrogen to ammonia by an iron model complex

The reduction of nitrogen (N2) to ammonia (NH3) is a requisite transformation for life. Although it is widely appreciated that the iron-rich cofactors of nitrogenase enzymes facilitate this transformation, how they do so remains poorly understood. A central element of debate has been the exact site or sites of N2 coordination and reduction. In synthetic inorganic chemistry, an early emphasis was placed on molybdenum because it was thought to be an essential element of nitrogenases and because it had been established that well-defined molybdenum model complexes could mediate the stoichiometric conversion of N2 to NH3 (ref. 9). This chemical transformation can be performed in a catalytic fashion by two well-defined molecular systems that feature molybdenum centres. However, it is now thought that iron is the only transition metal essential to all nitrogenases, and recent biochemical and spectroscopic data have implicated iron instead of molybdenum as the site of N2 binding in the FeMo-cofactor. Here we describe a tris(phosphine)borane-supported iron complex that catalyses the reduction of N2 to NH3 under mild conditions, and in which more than 40 per cent of the proton and reducing equivalents are delivered to N2. Our results indicate that a single iron site may be capable of stabilizing the various NxHy intermediates generated during catalytic NH3 formation. Geometric tunability at iron imparted by a flexible iron-boron interaction in our model system seems to be important for efficient catalysis. We propose that the interstitial carbon atom recently assigned in the nitrogenase cofactor may have a similar role, perhaps by enabling a single iron site to mediate the enzymatic catalysis through a flexible iron-carbon interaction.

Fe-N2/CO complexes that model a possible role for the interstitial C atom of FeMo-cofactor (FeMoco)

We report here a series of four- and five-coordinate Fe model complexes that feature an axial tri(silyl)methyl ligand positioned trans to a substrate-binding site. This arrangement is used to crudely model a single-belt Fe site of the FeMo-cofactor that might bind N2 at a position trans to the interstitial C atom. Reduction of a trigonal pyramidal Fe(I) complex leads to uptake of N2 and subsequent functionalization furnishes an open-shell Fe-diazenido complex. A related series of five-coordinate Fe-CO complexes stable across three redox states is also described. Spectroscopic, crystallographic, and Density Functional Theory (DFT) studies of these complexes suggest that a decrease in the covalency of the Fe-C(alkyl) interaction occurs upon reduction and substrate binding. This leads to unusually long Fe-C(alkyl) bond distances that reflect an ionic Fe-C bond. The data presented are contextualized in support of a hypothesis wherein modulation of a belt Fe-C interaction in the FeMo-cofactor facilitates substrate binding and reduction.

Tracing the route to ammonia: a theoretical study on the possible pathways for dinitrogen reduction with tripodal iron complexes

The chemistry of nitrogen fixation has been the subject of considerable research with a view to gaining a proper understanding of the mechanistic details. In this article, density functional calculations are performed on all the mechanistic possibilities for dinitrogen reduction mediated by the tripodal iron complexes [(SiP(Me)3)Fe(I)] ([Fe(Si)]) and [(BP(Me)3)Fe(0)] ([Fe(B)]). Dinitrogen addition to the neutral bare complex is found to be thermodynamically more favorable than that to the anionic one. Both symmetric and asymmetric pathways, along with the possible intermediates and transition states, are considered in this study. For both systems, the symmetric path is found to be more likely, although the prospect of the asymmetric path cannot be ignored. Moreover, interconversions between these two pathways are found to be less likely. This study corroborates most experimental observations and provides theoretical insight into the possible existence of some hitherto unknown intermediates such as multiple-bonded Fe-N species in a trigonal bipyramidal geometry. Furthermore, in agreement with experimental observations, this study also highlights the possibility of hydrogen and hydrazine evolution during the complete reduction of dinitrogen.

Cobalt-Magnesium and Iron-Magnesium Complexes with Weakened Dinitrogen Bridges

The cooperative binding of N₂ by late transition metals and main-group metals is a promising strategy for N-N bond weakening and activation. We report the use of activated Rieke magnesium for reduction of iron and cobalt complexes supported by bulky β-diketiminate ligands. Binding of N₂ is accompanied by assembly of a linear M-NN-Mg-NN-M (M = Co, Fe) core with N-N bonds that are weakened, as judged by infrared spectroscopy. Both the cobalt and iron complexes require THF solvent, because of Mg-THF binding. The cobalt complex can be isolated as a pure solid, but the iron complex is stable only in solution. These results demonstrate the correlation between the binding mode and N-N weakening in heterobimetallic N₂ complexes.

Recent developments in the homogeneous reduction of dinitrogen by molybdenum and iron

The reduction of gaseous nitrogen is a challenge for industrial, biological and synthetic chemists. Major goals include understanding the formation of ammonia for agriculture, and forming N-C and N-Si bonds for the synthesis of fine chemicals. The iron-molybdenum active site of the enzyme nitrogenase has inspired chemists to explore iron and molybdenum complexes in transformations related to N2 reduction. This area of research has gained significant momentum, and the past two years have witnessed a number of significant advances in synthetic Fe-N2 and Mo-N2 chemistry. Furthermore, the identities of all atoms in the iron-molybdenum cofactor of nitrogenase have finally been elucidated, and the discovery of a carbide has generated new questions and targets for coordination chemists. This Perspective summarizes the recent work on iron and molydenum complexes, and highlights the opportunities for continued research.

Heterolytic H2 Cleavage and Catalytic Hydrogenation by an Iron Metallaboratrane

Reversible, heterolytic addition of H2 across an iron-boron bond in a ferraboratrane with formal hydride transfer to the boron gives iron-borohydrido-hydride complexes. These compounds catalyze the hydrogenation of alkenes and alkynes to the respective alkanes. Notably, the boron is capable of acting as a shuttle for hydride transfer to substrates. The results are interesting in the context of heterolytic substrate addition across metal-boron bonds in metallaboratranes and related systems, as well as metal-ligand bifunctional catalysis.

Tracing the interstitial carbide of the nitrogenase cofactor during substrate turnover

The fate of the interstitial atom of the nitrogenase cofactor during substrate turnover has remained a topic of interest since the discovery of this atom more than a decade ago. In this study, we labeled the interstitial carbide atom with (14)C and (13)C isotopes and traced the fate of the isotope under turnover conditions. Our results show that the interstitial carbide cannot be exchanged upon turnover, nor can it be used as a substrate and incorporated into the products. These observations point to a role of the interstitial carbide in stabilizing the cofactor structure, although a function of this atom in indirectly modulating the reactivity of the cofactor or directly interacting with the substrate cannot be excluded.

H-H and Si-H bond addition to Fe≡NNR2 intermediates derived from N2

The synthesis and characterization of Fe-diphosphineborane complexes are described in the context of N2 functionalization chemistry. Iron aminoimides can be generated at room temperature under 1 atm N2 and are shown to react with E-H bonds from PhSiH3 and H2. The resulting products derive from delivery of the E fragment to Nα and the H atom to B. The flexibility and lability of the Fe-BPh interactions in these complexes engender this reactivity.

Mononuclear five- and six-coordinate iron hydrazido and hydrazine species

This article describes the synthesis and characterization of several low-spin iron(II) complexes that coordinate hydrazine (N(2)H(4)), hydrazido (N(2)H(3)(-)), and ammonia. The sterically encumbered tris(di-meta-terphenylphosphino)borate ligand, [PhBP(mter)(3)](-), is introduced to provide access to species that cannot be stabilized with the [PhBP(Ph)(3)](-) ligand ([PhBP(R)(3)](-) = PhB(CH(2)PR(2))(3)(-)). Treatment of [PhBP(mter)(3)]FeMe with hydrazine generates the unusual 5-coordinate hydrazido complex [PhBP(mter)(3)]Fe(η(2)-N(2)H(3)) (1), in which the hydrazido serves as an L(2)X-type ligand. Upon coordination of an L-type ligand, the hydrazido shifts to an LX-type ligand, generating [PhBP(mter)(3)]Fe(L)(η(2)-N(2)H(3)) (L = N(2)H(4) (2) or NH(3) (3)). In contrast, treatment of [PhBP(Ph)(3)]FeMe with hydrazine forms the adduct [PhBP(Ph)(3)]Fe(Me)(η(2)-N(2)H(4)) (5). Complex 5 is thermally unstable to methane loss, generating intermediate [PhBP(Ph)(3)]Fe(η(2)-N(2)H(3)), which undergoes bimolecular coupling to produce {[PhBP(Ph)(3)]Fe}(2)(μ-η(1):η(1)-N(2)H(4))(μ-η(2):η(2)-N(2)H(2)). The oxidation of these and related hydrazine and hydrazido species is also presented. For example, oxidation of 1 or 5 with Pb(OAc)(4) results in disproportionation of the N(2)H(x) ligand (x = 3, 4), and formation of [PhBP(R)(3)]Fe(NH(3))(OAc) (R = Ph (9) and mter (11)).