Selective and efficient photocatalytic CO2 reduction to CO using visible light and an iron-based homogeneous catalyst

An Ir(III) Complex Photosensitizer With Strong Visible Light Absorption for Photocatalytic CO2 Reduction

A cyclometalated iridium(III) complex having 2-(pyren-1-yl)-4-methylquinoline ligands [Ir(pyr)] has a strong absorption band in the visible region (ε_444nm = 67,000 M⁻¹ cm⁻¹) but does not act as a photosensitizer for photochemical reduction reactions in the presence of triethylamine as an electron donor. Here, 1,3-dimethyl-2-(o-hydroxyphenyl)-2,3-dihydro-1H-benzo[d]imidazole (BI(OH)H) was used instead of the amine, demonstrating that BI(OH)H efficiently quenched the excited state of Ir(pyr) and can undergo the photochemical carbon dioxide (CO₂) reduction catalyzed by trans(Cl)-Ru(dmb)(CO)₂Cl₂ (dmb = 4,4′-dimethyl-2,2′-bipyridine, Ru) to produce formate as the main product. We also synthesized a binuclear complex combining Ir(pyr) and Ruvia an ethylene bridge and investigated its photochemical CO₂ reduction activity in the presence of BI(OH)H.

An Unexpected Iron (II)-Based Homogeneous Catalytic System for Highly Efficient CO2-to-CO Conversion under Visible-Light Irradiation

We present two as-synthesized Fe(II)-based molecular catalysts with 1,10-phenanthroline (phen) ligands; Fe(phen)₃Cl₂ (1) and [Fe(phen)₂(CH₃CH₂OH)Cl]Cl (2), and their robust catalytic properties for the conversion of CO₂ to CO in DMF/TEOA (DMF = N,N’-dimethylformamide; TEOA = triethanolamine) solution containing Ru(bpy)₃²⁺ and BIH (1,3-dimethyl-2-phenyl-2,3- dihydro-1H-benzo-[d]-imidazole). High turnover numbers (TONs) of 19,376 were achieved with turnover frequencies (TOFs) of 3.07 s⁻¹ for complex 1 (1.5 × 10⁻⁷ M). A quantum efficiency of 0.38% was observed after 5 h irradiated by 450 nm monochromatic light. The generation rate of CO₂ and H₂ were tuned by optimizing the experimental conditions, resulting in a high CO selectivity of 90%. The remarkable contribution of the photosensitizer to the total TON_CO was found being 19.2% (as shown by tests under similar conditions without catalysts) when BIH was employed as a sacrificial electron donor. The product selectivity in complex 2 reached 95%, and the corresponding TON_CO and TOF_CO were 33,167 and 4.61 s⁻¹ in the same concentration with complex 1 used as catalyst; respectively. This work provides guidance for future designs of simple, highly efficient and selective molecular catalytic systems that facilitate carbon-neutral solar-to-fuel conversion processes

Photocatalytic Reverse Semi-Combustion Driven by Ionic Liquids

The simple photolysis of CO₂ in aqueous solutions to generate CO and/or hydrocarbons and derivatives in the presence of a catalyst is considered to be a clean and efficient approach for utilizing CO₂ as a C1 building block. Despite the huge efforts dedicated to this transformation using either semiconductors or homogeneous catalysts, only small improvements of the catalytic activity have been achieved so far. This article reports that simple aqueous solutions of organic salts-denominated as ionic liquids-can efficiently photo-reduce CO₂ to CO without using photosensitizers or sacrificial agents. The system relies on the formation of the [CO₂ ]^.- intermediate through homolytic C-C bond cleavage in a cation-CO₂ adduct of imidazolium-based ionic liquids (ILs). The system continuously produced CO up to 2.88 mmol g^-1 of IL after 40 h of irradiation by using an aqueous solution of 1-n-butyl-3-methylimidazolium-2-carboxylate (BMIm.CO₂ ) IL, representing an apparent quantum yield of 3.9 %. The organophotocatalytic principles of our system may help to develop more simple and efficient organic materials for the production of solar fuels from CO₂ under mild conditions, which represents a real alternative to those based on semiconductors and homogeneous metal-based catalysts.

Electro- and Solar-Driven Fuel Synthesis with First Row Transition Metal Complexes

The synthesis of renewable fuels from abundant water or the greenhouse gas CO2 is a major step toward creating sustainable and scalable energy storage technologies. In the last few decades, much attention has focused on the development of nonprecious metal-based catalysts and, in more recent years, their integration in solid-state support materials and devices that operate in water. This review surveys the literature on 3d metal-based molecular catalysts and focuses on their immobilization on heterogeneous solid-state supports for electro-, photo-, and photoelectrocatalytic synthesis of fuels in aqueous media. The first sections highlight benchmark homogeneous systems using proton and CO2 reducing 3d transition metal catalysts as well as commonly employed methods for catalyst immobilization, including a discussion of supporting materials and anchoring groups. The subsequent sections elaborate on productive associations between molecular catalysts and a wide range of substrates based on carbon, quantum dots, metal oxide surfaces, and semiconductors. The molecule-material hybrid systems are organized as "dark" cathodes, colloidal photocatalysts, and photocathodes, and their figures of merit are discussed alongside system stability and catalyst integrity. The final section extends the scope of this review to prospects and challenges in targeting catalysis beyond "classical" H2 evolution and CO2 reduction to C1 products, by summarizing cases for higher-value products from N2 reduction, C x>1 products from CO2 utilization, and other reductive organic transformations.

Cathodized copper porphyrin metal-organic framework nanosheets for selective formate and acetate production from CO2 electroreduction

An efficient and selective Cu catalyst for CO2 electroreduction is highly desirable since current catalysts suffer from poor selectivity towards a series of products, such as alkenes, alcohols, and carboxylic acids. Here, we used copper(ii) paddle wheel cluster-based porphyrinic metal-organic framework (MOF) nanosheets for electrocatalytic CO2 reduction and compared them with CuO, Cu2O, Cu, a porphyrin-Cu(ii) complex and a CuO/complex composite. Among them, the cathodized Cu-MOF nanosheets exhibit significant activity for formate production with a faradaic efficiency (FE) of 68.4% at a potential of -1.55 V versus Ag/Ag+. Moreover, the C-C coupling product acetate is generated from the same catalyst together with formate at a wide voltage range of -1.40 V to -1.65 V with the total liquid product FE from 38.8% to 85.2%. High selectivity and activity are closely related to the cathodized restructuring of Cu-MOF nanosheets. With the combination of X-ray diffraction, X-ray photoelectron spectroscopy, high resolution transmission electron microscopy and Fourier transform infrared spectroscopy, we find that Cu(ii) carboxylate nodes possibly change to CuO, Cu2O and Cu4O3, which significantly catalyze CO2 to formate and acetate with synergistic enhancement from the porphyrin-Cu(ii) complex. This intriguing phenomenon provides a new opportunity for the rational design of high-performance Cu catalysts from pre-designed MOFs.

Electrochemical and Photoelectrochemical Properties of Nickel Oxide (NiO) With Nanostructured Morphology for Photoconversion Applications

The cost-effective production of chemicals in electrolytic cells and the conversion of the radiation energy into electrical energy in photoelectrochemical cells (PECs) require the use of electrodes with large surface area, which possess either electrocatalytic or photoelectrocatalytic properties. In this context nanostructured semiconductors are electrodic materials of great relevance because of the possibility of varying their photoelectrocatalytic properties in a controlled fashion via doping, dye-sensitization or modification of the conditions of deposition. Among semiconductors for electrolysers and PECs the class of the transition metal oxides (TMOs) with a particular focus on NiO interests for the chemical-physical inertness in ambient conditions and the intrinsic electroactivity in the solid state. The latter aspect implies the existence of capacitive properties in TMO and NiO electrodes which thus act as charge storage systems. After a comparative analysis of the (photo)electrochemical properties of nanostructured TMO electrodes in the configuration of thin film the use of NiO and analogs for the specific applications of water photoelectrolysis and, secondly, photoelectrochemical conversion of carbon dioxide will be discussed.

Small-molecule activation with iron porphyrins using electrons, photons and protons: some recent advances and future strategies

Substituted tetraphenyl Fe porphyrins are versatile molecular catalysts for the activation of small molecules (such as O₂, H⁺ or CO₂), which could lead to renewable energy storage, the direct production of fuels or new catalytic relevant processes.

A molecular noble metal-free system for efficient visible light-driven reduction of CO2 to CO

A new iron complex bearing a pentadentate quinoline–pyridine ligand exhibits excellent photocatalytic activity towards CO₂-to-CO conversion using the commercially available organic dye purpurin as the photosensitizer and BIH as the electron donor.

Visible-Light-Driven Conversion of CO2 to CH4 with an Organic Sensitizer and an Iron Porphyrin Catalyst

Using a phenoxazine-based organic photosensitizer and an iron porphyrin molecular catalyst, we demonstrated photochemical reduction of CO₂ to CO and CH₄ with turnover numbers (TONs) of 149 and 29, respectively, under visible-light irradiation (λ > 435 nm) with a tertiary amine as sacrificial electron donor. This work is the first example of a molecular system using an earth-abundant metal catalyst and an organic dye to effect complete 8e^-/8H⁺ reduction of CO₂ to CH₄, as opposed to typical 2e^-/2H⁺ products of CO or formic acid. The catalytic system continuously produced methane even after prolonged irradiation up to 4 days. Using CO as the feedstock, the same reactive system was able to produce CH₄ with 85% selectivity, 80 TON and a quantum yield of 0.47%. The redox properties of the organic photosensitizer and acidity of the proton source were shown to play a key role in driving the 8e^-/8H⁺ processes.

Photocatalytic CO2 Reduction with Manganese Complexes Bearing a κ2-PN Ligand: Breaking the α-Diimine Hold on Group 7 Catalysts and Switching Selectivity

The fundamental challenge of reducing CO₂ into more valuable energy-containing compounds depends on revealing new catalysts for this process. By removal of the long-standing limitation of α-diimine ligation, which is dominant in photocatalytic complexes in this area, new visible-light, CO₂-reducing photocatalysts based on Mn and Re supported by κ²-PN phosphinoaminopyridine ligands were identified. These catalysts, [M{κ²-(Ph₂P)NH(NC₅H₄)}(CO)₃Br], displayed excellent product selectivity and, by a change of only the metal center, gave a dramatic product switch from CO with M = Mn to HCO₂H with M = Re. The catalyst systems were explored with variation of the ligand, electron donor, solvent, and photosensitizer. The products were definitively traced using ¹³CO₂ as a substrate. Both complexes quenched the excited-state photosensitizer Ru(bpy)₃²⁺*, suggesting oxidative quenching as a potential entry into the catalytic cycle.

Metallic Cobalt-Carbon Composite as Recyclable and Robust Magnetic Photocatalyst for Efficient CO2 Reduction

CO2 conversion into value-added chemical fuels driven by solar energy is an intriguing approach to address the current and future demand of energy supply. Currently, most reported surface-sensitized heterogeneous photocatalysts present poor activity and selectivity under visible light irradiation. Here, photosensitized porous metallic and magnetic 1200 CoC composites (PMMCoCC-1200) are coupled with a [Ru(bpy)3 ]Cl2 photosensitizer to efficiently reduce CO2 under visible-light irradiation in a selective and sustainable way. As a result, the CO production reaches a high yield of 1258.30 µL with selectivity of 64.21% in 6 h, superior to most reported heterogeneous photocatalysts. Systematic investigation demonstrates that the central metal cobalt is the active site for activating the adsorbed CO2 molecules and the surficial graphite carbon coating on cobalt metal is crucial for transferring the electrons from the triplet metal-to-ligand charge transfer of the photosensitizer Ru(bpy)32+ , which gives rise to significant enhancement for CO2 reduction efficiency. The fast electron injection from the excited Ru(bpy)32+ to PMMCoCC-1200 and the slow backward charge recombination result in a long-lived, charge-separated state for CO2 reduction. More impressively, the long-time stability and easy magnetic recycling ability of this metallic photocatalyst offer more benefits to the photocatalytic field.

Electrocatalytic and Photocatalytic Reduction of CO2 to CO by Cobalt(II) Tripodal Complexes: Low Overpotentials, High Efficiency and Selectivity

The reduction of carbon dioxide (CO₂ ) has been considered as an approach to mitigate global warming and to provide renewable carbon-based fuels. Rational design of efficient, selective, and inexpensive catalysts with low overpotentials is urgently desired. In this study, four cobalt(II) tripodal complexes are tested as catalysts for CO₂ reduction to CO in a MeCN/H₂ O (4:1 v/v) solution. The replacement of pyridyl groups in the ligands with less basic quinolinyl groups greatly reduces the required overpotential for CO₂ -to-CO conversion down to 200-380 mV. Benefitting from the low overpotentials, a photocatalyst system for CO₂ -to-CO conversion is successfully constructed, with an maximum turnover number (TON) of 10 650±750, a turnover frequency (TOF) of 1150±80 h^-1 , and almost 100 % selectivity to CO. These outstanding catalytic performances are further elucidated by DFT calculations.

Non-sensitized selective photochemical reduction of CO2 to CO under visible light with an iron molecular catalyst

A substituted tetraphenyl iron porphyrin, bearing positively charged trimethylammonio groups at the para position of each phenyl ring, demonstrates its ability as a homogeneous molecular catalyst to selectively reduce CO₂ to CO under visible light irradiation in organic media without the assistance of a sensitizer and no competitive hydrogen evolution for several days.

Heterogeneous Single-Atom Catalyst for Visible-Light-Driven High-Turnover CO2 Reduction: The Role of Electron Transfer

Visible-light-driven conversion of CO₂ into chemical fuels is an intriguing approach to address the energy and environmental challenges. In principle, light harvesting and catalytic reactions can be both optimized by combining the merits of homogeneous and heterogeneous photocatalysts; however, the efficiency of charge transfer between light absorbers and catalytic sites is often too low to limit the overall photocatalytic performance. In this communication, it is reported that the single-atom Co sites coordinated on the partially oxidized graphene nanosheets can serve as a highly active and durable heterogeneous catalyst for CO₂ conversion, wherein the graphene bridges homogeneous light absorbers with single-atom catalytic sites for the efficient transfer of photoexcited electrons. As a result, the turnover number for CO production reaches a high value of 678 with an unprecedented turnover frequency of 3.77 min^-1 , superior to those obtained with the state-of-the-art heterogeneous photocatalysts. This work provides fresh insights into the design of catalytic sites toward photocatalytic CO₂ conversion from the angle of single-atom catalysis and highlights the role of charge kinetics in bridging the gap between heterogeneous and homogeneous photocatalysts.

Review on optofluidic microreactors for artificial photosynthesis

Artificial photosynthesis (APS) mimics natural photosynthesis (NPS) to store solar energy in chemical compounds for applications such as water splitting, CO2 fixation and coenzyme regeneration. NPS is naturally an optofluidic system since the cells (typical size 10 to 100 µm) of green plants, algae, and cyanobacteria enable light capture, biochemical and enzymatic reactions and the related material transport in a microscale, aqueous environment. The long history of evolution has equipped NPS with the remarkable merits of a large surface-area-to-volume ratio, fast small molecule diffusion and precise control of mass transfer. APS is expected to share many of the same advantages of NPS and could even provide more functionality if optofluidic technology is introduced. Recently, many studies have reported on optofluidic APS systems, but there is still a lack of an in-depth review. This article will start with a brief introduction of the physical mechanisms and will then review recent progresses in water splitting, CO2 fixation and coenzyme regeneration in optofluidic APS systems, followed by discussions on pending problems for real applications.

Covalently linking CuInS2 quantum dots with a Re catalyst by click reaction for photocatalytic CO2 reduction

Covalently linking a Re catalyst to CuInS₂ QDs through a facile click reaction for efficient electron transfer to improve photocatalytic CO₂ reduction is reported.

Photocatalytic reduction of CO2 to CO and formate by a novel Co(ii) catalyst containing a cis-oxygen atom: photocatalysis and DFT calculations

A novel CoN₄-complex containing an oxygen atom at cis-coordination site enables to convert CO₂ to CO and formate in a photocatalytic system.

Visible-light-driven CO2 photoreduction over ZnxCd1−xS solid solution coupling with tetra(4-carboxyphenyl)porphyrin iron(iii) chloride

Photocatalytic reduction of CO₂ into solar fuels is a promising approach to supply sustainable energy and efficiently use CO₂ as a resource.

Highly efficient and selective visible-light driven CO2-to-CO conversion by a Co-based cryptate in H2O/CH3CN solution

A Co-based cryptate exhibits highly efficient and selective photocatalytic CO₂-to-CO conversion under either pure CO₂ or 10% CO₂ in a water-containing system.

Photo- and Electrochemical Valorization of Carbon Dioxide Using Earth-Abundant Molecular Catalysts

The dramatic increase in anthropogenic carbon dioxide emissions in recent decades has forced us to look for alternative carbon-neutral processes for the production of energy vectors and commodity chemicals. Photo- and electrochemical reduction of CO₂ are appealing strategies for the storage of sustainable and intermittent energies in the form of chemical bonds of synthetic fuels and value-added molecules. In these approaches, carbon dioxide is converted to products such as CO, HCOOH and MeOH through proton-coupled electron transfer reactions. The use of earth-abundant elements as components of the catalytic materials is crucial for the large-scale applicability of this technology. This review summarizes the most recent advances related to this issue, with particular focus on studies where molecular metal complexes are used as catalysts. In addition, with the aim of aiding in the design of more robust and efficient non-noble metal-based catalysts, we discuss the lessons learned from the corresponding mechanistic studies.

Visible-light Homogeneous Photocatalytic Conversion of CO2 into CO in Aqueous Solutions with an Iron Catalyst

An iron-substituted tetraphenyl porphyrin bearing positively charged trimethylammonio groups at the para position of each phenyl ring catalyzes the photoinduced conversion of CO₂ . This complex is water soluble and acts as a molecular catalyst to selectively reduce CO₂ into CO under visible-light irradiation in aqueous solutions (acetonitrile/water=1:9 v/v) with the assistance of purpurin, a simple organic photosensitizer. CO is produced with a catalytic selectivity of 95 % and turnover number up to 120, illustrating the possibility of photocatalyzing the reduction of CO₂ in aqueous solution by using visible light, a simple organic sensitizer coupled to an amine as a sacrificial electron donor, and an earth-abundant metal-based molecular catalyst.