Stereo-, Temporal and Chemical Control through Photoactivation of Living Radical Polymerization: Synthesis of Block and Gradient Copolymers

One-Pot Synthesis of Block Copolymers by Orthogonal Ring-Opening Polymerization and PET-RAFT Polymerization at Ambient Temperature

Well-defined poly(ε-caprolactone)-b-poly(methyl acrylate) (PCL-b-PMA) block copolymers were synthesized at ambient temperature by one-pot combination of diphenyl phosphate (DPP)-catalyzed ring-opening polymerization (ROP) and photoinduced electron/energy transfer-reversible addition-fragmentation chain transfer (PET-RAFT) polymerization. Full orthogonality of PET-RAFT polymerization and DPP-catalyzed ROP was confirmed by kinetic studies, which allowed facile synthesis of PCL-b-PMA block copolymers without a specific polymerization sequence. The resulting PCL-b-PMA block copolymers synthesized by either sequential or simultaneous ROP and PET-RAFT polymerization showed remarkably low molecular weight distributions (≤1.15), indicating that both ROP and PET-RAFT polymerizations proceeded in a controlled manner. In contrast to previous synthetic methods to prepare block copolymers, this facile one-pot method allows for rapid synthesis of block copolymers controlled via visible light.

Light-Controlled Radical Polymerization: Mechanisms, Methods, and Applications

The use of light to mediate controlled radical polymerization has emerged as a powerful strategy for rational polymer synthesis and advanced materials fabrication. This review provides a comprehensive survey of photocontrolled, living radical polymerizations (photo-CRPs). From the perspective of mechanism, all known photo-CRPs are divided into either (1) intramolecular photochemical processes or (2) photoredox processes. Within these mechanistic regimes, a large number of methods are summarized and further classified into subcategories based on the specific reagents, catalysts, etc., involved. To provide a clear understanding of each subcategory, reaction mechanisms are discussed. In addition, applications of photo-CRP reported so far, which include surface fabrication, particle preparation, photoresponsive gel design, and continuous flow technology, are summarized. We hope this review will not only provide informative knowledge to researchers in this field but also stimulate new ideas and applications to further advance photocontrolled reactions.

Photoinduced Electron Transfer Reactions for Macromolecular Syntheses

Photochemical reactions, particularly those involving photoinduced electron transfer processes, establish a substantial contribution to the modern synthetic chemistry, and the polymer community has been increasingly interested in exploiting and developing novel photochemical strategies. These reactions are efficiently utilized in almost every aspect of macromolecular architecture synthesis, involving initiation, control of the reaction kinetics and molecular structures, functionalization, and decoration, etc. Merging with polymerization techniques, photochemistry has opened up new intriguing and powerful avenues for macromolecular synthesis. Construction of various polymers with incredibly complex structures and specific control over the chain topology, as well as providing the opportunity to manipulate the reaction course through spatiotemporal control, are one of the unique abilities of such photochemical reactions. This review paper provides a comprehensive account of the fundamentals and applications of photoinduced electron transfer reactions in polymer synthesis. Besides traditional photopolymerization methods, namely free radical and cationic polymerizations, step-growth polymerizations involving electron transfer processes are included. In addition, controlled radical polymerization and "Click Chemistry" methods have significantly evolved over the last few decades allowing access to narrow molecular weight distributions, efficient regulation of the molecular weight and the monomer sequence and incredibly complex architectures, and polymer modifications and surface patterning are covered. Potential applications including synthesis of block and graft copolymers, polymer-metal nanocomposites, various hybrid materials and bioconjugates, and sequence defined polymers through photoinduced electron transfer reactions are also investigated in detail.

LED and visible light-induced metal free ATRP using reducible dyes in the presence of amines

A new photoinitiating system involving electron acceptor dyes, namely, eosin Y and erythrosin B, in conjunction with alkyl halides and amines for photoinduced ATRP of (meth)acrylates and vinyl monomers in the absence of inorganic catalysts is reported.

Straightforward catalyst/solvent-free iodine-mediated living radical polymerization of functional monomers driven by visible light irradiation

A simple and highly efficient catalyst/solvent-free iodine-mediated polymerization system for functional monomers (DMAEMA, PEGMA and GMA) was successfully developed under irradiation of visible light or sunlight.

The use of electrostatic association for rapid RAFT synthesis of histamine polyelectrolyte in aqueous solutions at and below 25 °C

Electrostatic association for rapid and quantitative synthesis of well-defined polyelectrolytes in dilute aqueous solutions at and below 25 °C.

Stereocontrol of Methyl Methacrylate during Photoinduced Nitroxide-Mediated Polymerization in the Presence of Photosensitive Alkoxyamine

Photosensitive alkoxyamine 2,2,6,6-tetramethyl-1-(1-phenylethoxy)piperidin-4-yl quinoline-2-carboxylate (PE-TEMPO-Q) was synthesized. Photochemical properties of PE-TEMPO-Q were studied to develop photoinduced nitroxide-mediated polymerization of methyl methacrylate (MMA). Rapid and facile polymerization at ambient temperature with PE-TEMPO-Q as an initiator was confirmed to proceed in a controlled mechanism based on the linear growth in molecular weight combined with relative narrow polydispersity index (1.4–1.8) of the resulting polymers. The stereochemistry of obtained polymers was also investigated, and the syndiotacticity slightly increased compared with the typical photopolymerization. Dual-controlled photopolymerization of MMA was achieved in the presence of synthesized alkoxyamine.

A photo-induced nitroxide trapping method to prepare α,ω-heterotelechelic polymers

A facile and general strategy for the preparation of telechelic polymers is demonstrated via a photo-induced nitroxide radical trapping method.

Simultaneous utilization of a bifunctional ruthenium complex as an efficient catalyst for RAFT controlled photopolymerization and a sensing probe for the facile fabrication of an ECL platform

The ruthenium complex played simultaneous bifunctional roles as an efficient catalyst for RAFT-controlled photopolymerization and a sensing probe for the facile fabrication of an ECL platform.

Group interval-controlled polymers: an example of epoxy functional polymers via step-growth thiol–yne polymerization

Here, we successfully synthesized a series of epoxy GICPs via one-step UV-triggered thiol–yne polymerization of commercial glycidyl propargyl ether and dithiols at 0 °C..

Metal-free photoinduced electron transfer–atom transfer radical polymerization (PET–ATRP) via a visible light organic photocatalyst

This work developed the first example of PET-ATRP using a reductive pathway, which provides new opportunities for the synthesis of well-controlled polymer architectures through a photochemical approach.

Catalyst-free iodine-mediated living radical polymerization under irradiation over a wide visible-light spectral scope

Catalyst-free iodine-mediated photo-induced solution LRP of methyl methacrylates under LED light was successfully established over a wide range of irradiation wavelengths (390–630 nm).

Use of Polyion Complexation for Polymerization-Induced Self-Assembly in Water under Visible Light Irradiation at 25 °C

Polyion complexation (PIC) as the driving force of polymerization-induced self-assembly (PISA), that is, PIC-PISA, is explored. Reversible addition-fragmentation chain transfer (RAFT) dispersion polymerization of NH₃⁺-monomer 2-aminoethylacrylamide hydrochloride (AEAM) can be achieved in water under visible light irradiation at 25 °C, using nonionic poly2-hydroxypropylmethacrylamide (PHPMA) macromolecular chain transfer agent in the presence of anionic poly(sodium 2-acrylamido-2-methylpropanesulfonate) (PAMPS) PIC-template. Sphere-to-network transition occurs, owing to the PIC of PAMPS with growing chains upon reaction close to isoelectric point (IEP); thereafter, the increase of electrostatic repulsion promotes the split of networks and the rupture of spheres into fragments. Therefore, the free-flowing solution becomes viscous liquid and free-standing physical gel, and then back into viscous and free-flowing liquid. Such a PIC-PISA is appealing for gene delivery because the size and surface charge are variable on demand and at high solids.

Visible-Light-Regulated Controlled/Living Radical Polymerization in Miniemulsion

The implementation of photopolymerization processes in aqueous dispersed systems has the potential to afford greener approaches to the preparation of polymeric materials and has motivated researchers to perform photopolymerization in emulsion. However, these previous works have employed UV irradiation to induce photodegradation of a photoinitiator in addition to specialized equipment setups, thus limiting widespread use of these approaches. In this work, we aim to remedy these drawbacks via the implementation of photoredox catalysis in the regulation of a controlled/living radical polymerization under visible light. Utilizing the photoinduced electron transfer-reversible addition-fragmentation chain transfer (PET-RAFT) process, we report the miniemulsion polymerization of styrene mediated by a household grade blue LED (λ_max = 460 nm, 0.73 mW/cm²). The polymerization rate can be easily manipulated by light intensity and catalyst concentration. Finally, temporal control was demonstrated via ON/OFF experiments, which shows that no significant detriment is caused by prolonged interruptions to the light exposure.

Polymerization-Induced Self-Assembly Using Visible Light Mediated Photoinduced Electron Transfer-Reversible Addition-Fragmentation Chain Transfer Polymerization

The ruthenium-based photoredox catalyst, Ru(bpy)₃Cl₂, was employed to activate reversible addition-fragmentation chain transfer (RAFT) dispersion polymerization via a photoinduced electron transfer (PET) process under visible light (λ = 460 nm, 0.7 mW/cm²). Poly(oligo(ethylene glycol) methyl ether methacrylate) was chain extended with benzyl methacrylate to afford in situ self-assembled polymeric nanoparticles with various morphologies. The effect of different intrinsic reaction parameters, such as catalyst concentration, total solids content, and cosolvent addition was investigated with respect to the formation of different nanoparticle morphologies, including spherical micelles, worm-like micelles, and vesicles. Importantly, highly pure worm-like micelles were readily isolated due to the in situ formation of highly viscous gels. Finally, "ON/OFF" control over the dispersion polymerization was demonstrated by online Fourier transform near-infrared (FTNIR) spectroscopy, allowing for temporal control over the nanoparticle morphology.

Organic Electron Donor-Acceptor Photoredox Catalysts: Enhanced Catalytic Efficiency toward Controlled Radical Polymerization

In this study, we designed and synthesized novel organic single electron donor-acceptor molecules containing a free base porphyrin and a thiocarbonylthio group. The porphyrin acts as a light-harvesting antenna and donates an excited electron upon light irradiation to the electron-accepting thiocarbonylthio group. The excited electronic state of the donor-acceptor generates a radical from the thiocarbonylthio compound to activate a living radical polymerization in the presence of monomers. Thus, these donor-acceptor systems play the roles of highly efficient photoredox catalysts and radical initiators. The presence of both donor and acceptor in a single molecule enhanced the electron transfer efficiency in comparison to the donor/acceptor mixture and consequently greatly increased polymerization rates of vinyl monomers under visible light irradiation. The polymerizations mediated by these electron donor-acceptor photoredox catalysts were investigated under green (λ_max = 530 nm, 0.7 mW/cm²) and red (λ_max = 635 nm, 0.7 mW/cm²) lights, which exhibited great control over molecular weights, molecular weight distributions, and end-group functionalities.