Tunable Visible and Near Infrared Photoswitches

Planarization-Induced Activation Wavelength Red-Shift and Thermal Half-Life Acceleration in Hydrazone Photoswitches

The optimization and modulation of the properties of photochromic compounds, such as their activation wavelengths and thermal relaxation half-lives (τ1/2), are essential for their adaptation in various applications. In this work, we studied the effect of co-planarization of the rotary fragment of two photochromic hydrazones with the core of the molecule on their switching properties. The Z and E isomers of both compounds exhibit red-shifted absorption bands relative to their twisted versions, allowing for their photoswitching using longer wavelengths of light. Additionally, the thermal half-lives of both hydrazones are drastically shortened from hundreds of years to days.

It's a Trap: Thiol-Michael Chemistry on a DASA Photoswitch

Donor-acceptor Stenhouse adducts (DASA) are popular photoswitches capable of toggling between two isomers depending on the light and temperature of the system. The cyclized polar form is accessed by visible-light irradiation, whereas the linear nonpolar form is recovered in the dark. Upon the formation of the cyclized form, the DASA contains a double bond featuring a β-carbon prone to nucleophilic attack. Here, an isomer selective thiol-Michael reaction between the cyclized DASA and a base-activated thiol is introduced. The thiol-Michael addition was carried out with an alkyl (1-butanethiol) and an aromatic thiol (p-bromothiophenol) as reaction partners, both in the presence of a base. Under optimized conditions, the reaction proceeds preferentially in the presence of light and base. The current study demonstrates that DASAs can be selectively trapped in their cyclized state.

Photocycloadditions in disparate chemical environments

We elucidate the wavelength dependence of a photocycloaddition by accessing action plots dependent on the reactivity relative to the number of absorbed photons and establish the effect of concentration and solvent on the reactivity.

Chemistry of photoswitching molecules in the confined nanospace of aqueous molecular vessels

This Frontier article highlights the photoswitching behaviour of azobenzenes, spiropyrans and DASA molecules inside the nano cavity of self-assembled coordination molecular vessels in aqueous medium and in the solid state.

Inducing molecular isomerization assisted by water

Light is not the only stimulus that can induce linear-to-cyclic isomerization of donor-acceptor Stenhouse adducts (DASAs). Here we demonstrate the water-induced linear-to-cyclic isomerization of DASAs. The mechanism of the water-induced linear-to-cyclic isomerization of DASAs is investigated by density functional theory (DFT) calculations. Water molecules coordinate with DASAs and stabilize the intermediates and cyclic isomers, which favors cyclization thermodynamically. Moreover, the linear-to-cyclic isomerization is reversible. Heating removes the coordinated H2O molecules, which further triggers cyclic-to-linear isomerization. DASAs have been applied in information hiding/displaying and color switching under water vapor and heating control.

Photoactive Polyoxometalate/DASA Covalent Hybrids for Photopolymerization in the Visible Range

The synthesis of TBA-DASA-POM-DASA, the first photoactive covalent hybrid polyoxometalate (POM) incorporating a donor-acceptor Stenhouse adduct (DASA) reverse photochrome, is presented. It has been evidenced that in solution the equilibrium between the colorless cyclopentenone and the highly colored triene conformers is strongly dependent not only on the nature of the solvent but also the countercations, allowing to tune its optical properties. This complex has been further associated to photochromic spironaphtoxazine cations, resulting in a material which can be activated by two distinct optical stimuli. Moreover, when combined with N-methyldiethanolamine, TBA-DASA-POM-DASA constitutes a performing photoinitiating system for polyethylene glycol diacrylate polymerization and under visible light irradiation, a promising result in a domain scarcely developed in POM chemistry.

Multiresponsive Donor-Acceptor Stenhouse Adduct: Opportunities Arise from a Diamine Donor

A new donor-acceptor Stenhouse adduct based on a N,N,N'-trimethylethylenediamine donor has been reported. An unprecedented isomer has been isolated, and rich conversions between three isomers have been achieved upon visible-light irradiation or base/acid stimuli. The drastic color change associated with structural conversion has been utilized to selectively sense volatile primary amines as well as high-charged hard Lewis acids (Sc³⁺, Ti⁴⁺, Cr³⁺, and Al³⁺).

Taming the Complexity of Donor-Acceptor Stenhouse Adducts: Infrared Motion Pictures of the Complete Switching Pathway

Switches that can be actively steered by external stimuli along multiple pathways at the molecular level are the basis for next-generation responsive material systems. The operation of commonly employed molecular photoswitches revolves around one key structural coordinate. Photoswitches with functionalities that depend on and can be addressed along multiple coordinates would offer novel means to tailor and control their behavior and performance. The recently developed donor-acceptor Stenhouse adducts (DASAs) are versatile switches suitable for such applications. Their photochemistry is well understood, but is only responsible for part of their overall photoswitching mechanism. The remaining thermal switching pathways are to date unknown. Here, rapid-scan infrared absorption spectroscopy is used to obtain transient fingerprints of reactions occurring on the ground state potential energy surface after reaching structures generated through light absorption. The spectroscopic data are interpreted in terms of structural transformations using kinetic modeling and quantum chemical calculations. Through this combined experimental-theoretical approach, we are able to unravel the complexity of the multidimensional ground-state potential energy surface explored by the photoswitch and use this knowledge to predict, and subsequently confirm, how DASA switches can be guided along this potential energy surface. These results break new ground for developing user-geared DASA switches but also shed light on the development of novel photoswitches in general.

Light-Controlled Orthogonal Covalent Bond Formation at Two Different Wavelengths

We report light-induced reactions in a two-chromophore system capable of sequence-independent λ-orthogonal reactivity relying solely on the choice of wavelength and solvent. In a solution of water and acetonitrile, LED irradiation at λ_max =285 nm leads to full conversion of 2,5-diphenyltetrazoles with N-ethylmaleimide to the pyrazoline ligation products. Simultaneously present o-methylbenzaldehyde thioethers are retained. Conversely, LED irradiation at λ_max =382 nm is used to induce ligation of the o-methylbenzaldehydes in acetonitrile with N-ethylmaleimide via o-quinodimethanes, while 2,5-diphenyltetrazoles also present are retained. This unprecedented photochemical selectivity is achieved through control of the number and wavelength of incident photons as well as favorable optical properties and quantum yields of the reactants in their environment.

UV/NIR-Light-Triggered Rapid and Reversible Color Switching for Rewritable Smart Fabrics

Remote, rapid, and ink-free printing/erasure on fabrics has great potential to revolutionize specialized clothing in numerous applications including fashion/aesthetic and security fields, but the construction of such smart fabrics has not been realized due to underlying obstacles in obtaining suitable photoreversible color-switching systems (PCSS). To address this problem, we have prepared TiO_{2- x} nanorods as photocatalytic and photothermal component. With redox dyes as reversible color indicators and hydroxyethyl cellulose (HEC) as polymer matrix, TiO_{2- x}/dye/HEC-based PCSS is coated on poly(dimethylsiloxane)-treated cotton fabric. Under 365 nm light irradiation, discoloration occurs in 180 s, resulting from the efficient photocatalytic reduction of the dye. On the contrary, when the colorless fabric is irradiated by 808 nm light, recoloration occurs in a very short time (∼100 s), far lower than the traditional heating mode (30-8 min at 90-150 °C). This rapid recoloration should be attributed to the localized high temperature (164.3-184.5 °C) induced by photothermal effect of TiO_{2- x}. Particularly, when TiO_{2- x}/dye/HEC-based PCSS is extended to coat commercial clothes (such as T-shirts), red/green/blue figures/letters can be rapidly and remotely printed by UV-light pen and then erased by near-infrared light, with high cycle stability. Therefore, such rewritable smart fabric represents an attractive alternative to regular clothes in meeting the increasing aesthetic or camouflage needs.

Turn-On Mode Fluorescence Switch by Using Negative Photochromic Imidazole Dimer

The development of fluorescence switchable molecules in several polar and apolar environments has been required for fluorescence imaging of nanostructures. Photochromic molecules are an important class for the reversible light-triggered fluorescence switching. Although many studies of fluorescence switching by using photochromic reactions have been reported, the report of photochromic molecules reversibly showing turn-on mode fluorescence switching has been limited in spite of their importance. Herein, we report the photoactivatable fluorescence based on negative photochromism, where the absorption spectrum of the compound after irradiation is blue-shifted relative to that before irradiation. We introduced naphthalimide units as a green fluorophore to the negative photochromic binaphthyl-bridged imidazole dimer. The fluorescence of the naphthalimide unit is efficiently quenched in the initial colored isomer (fluorescence quantum yield: Φ_fluo. = 0.01) by Förster resonance energy transfer. In contrast, the fluorescence quantum yield increases up to 0.75 in the transient isomer formed by the negative photochromic reaction. The fluorescence intensity thermally decreases with the thermal back reaction to form the original stable colored form. These results indicate that the negative photochromic molecules are suitable for turn-on mode fluorescence switches and will give an attractive insight for the development of reversible fluorescence switching molecules.

Recent Implementations of Molecular Photoswitches into Smart Materials and Biological Systems

Light is a nearly ideal stimulus for molecular systems. It delivers information encoded in the form of wavelengths and their intensities with high precision in space and time. Light is a mild trigger that does not permanently contaminate targeted samples. Its energy can be reversibly transformed into molecular motion, polarity, or flexibility changes. This leads to sophisticated functions at the supramolecular and macroscopic levels, from light-triggered nanomaterials to photocontrol over biological systems. New methods and molecular adapters of light are reported almost daily. Recently reported applications of photoresponsive systems, particularly azobenzenes, spiropyrans, diarylethenes, and indigoids, for smart materials and photocontrol of biological setups are described herein with the aim to demonstrate that the 21st century has become the Age of Enlightenment-"Le siècle des Lumières"-in molecular sciences.

Reversible Multicolor Photochromism of Dihydroazulene Crystals

The photochemical conversion of 1,8a-dihydroazulene-1,1-dicarbonitrile (DHA) to vinylheptafulvene (VHF) is a positive T-type photoswitch that is well understood in solution, but has not been explored in the solid state. Upon excitation with UV light, DHA is converted into VHF in the solid state, with a distinct color change from yellow to deep-red, and retention of crystallinity. The structure of the ring-opened product was assigned to syn-VHF using variable-temperature infrared spectroscopy, and determined by X-ray photodiffraction in a crystal enriched with the product by two-photon excitation. A radical pathway becomes an observable photoreaction channel at low temperatures, and includes a strongly colored, short-lived diradical intermediate.

Comparing photoswitching of acrylate or methacrylate polymers conjugated with donor–acceptor Stenhouse adducts

Polymers with donor–acceptor Stenhouse adduct (DASA) groups were synthesized using RAFT methods to evaluate the effect of polymer length (20 vs. 100 DP units) and backbone rigidity (acrylate and methacrylate blocks).

Synthesis and self-assembly of photoacid-containing block copolymers based on 1-naphthol

Photoacids experience a strong increase in acidity when absorbing light and, hence, can be considered as molecular switches. The incorporation into amphiphilic block copolymers leads to novel stimuli-responsive materials with great potential.

Unusual concentration dependence of the photoisomerization reaction in donor–acceptor Stenhouse adducts

The isomerization rates of a photochromic donor–acceptor Stenhouse adduct depend on concentration. The net photoisomerization rate decreases with increasing concentration in liquids and polymers.

Surface with Reversible Green-Light-Switched Wettability by Donor-Acceptor Stenhouse Adducts

In this report, we designed surfaces with reversible green-light-switched wettability via donor-acceptor Stenhouse adducts (DASAs). Photoresponsive micro/nanoparticles were prepared by coating the surfaces of silica micro/nanoparticles with polydopamine and then postmodifying with DASA molecules. Then, the particles were immobilized on a glass substrate surfaces either with double-sided adhesive tape or cross-linking poly(dimethylsiloxane). Silica micro/nanoparticles with various diameters (0.2, 2.5, and 85 μm) were used to fabricate the photoresponsive surface. Green light irradiation switches the hydrophobic linear DASA to a hydrophilic cyclic isomer, which further increases the wettability and contact angle hysteresis on the surface. On the other hand, heating (100 °C) induces the cyclic-to-linear isomerization of DASA molecules and switches the surface back to hydrophobic. The wettability of the DASA-modified surface is reversible under alternate green light irradiation and heating.

Structure-function relationships of donor-acceptor Stenhouse adduct photochromic switches

The first in-depth, systematic study of the photoswitching properties of Donor-Acceptor Stenhouse Adducts (DASAs) is reported. Barbituric acid derived DASAs functionalised with 14 different amines ranging from dimethylamine to 4-methoxy-N-methylaniline were structurally characterised in solution using 1H and 13C NMR spectroscopy and, in eight cases, in the solid state by single crystal X-ray diffraction. The distribution of coloured and colourless isomers in the dark, their photostationary states under irradiation, apparent thermal half-lives, and fatigue resistance are systematically compared. A simple kinetic model is used to characterise photoswitching behaviour and reveals that minor structural modifications can significantly improve the photoswitching properties of DASA photochromes. These modifications result in excellent photoswitching properties for '1st generation' DASAs in chloroform, including exceptional fatigue resistance, opening the door for these photochromic molecules to find widespread applications.

Second-order nonlinear optical properties of Stenhouse photoswitches: insights from density functional theory

We report the first investigation of the second-order nonlinear optical (NLO) properties of donor-acceptor Stenhouse adducts (DASAs), an emerging class of colored photochromes that undergo photoswitching with visible light to a colorless form. By using time-dependent density functional theory, we provide insights into the relationships linking the nature of the chemical substituents to the amplitude and contrasts of the NLO response. Solvent and frequency dispersion effects are also analyzed. The calculations predict that DASAs behave as high contrast NLO switches, a finding that extends their potential applications to photo-responsive NLO materials and devices.

New molecular switch architectures

In this paper we elaborate on recently developed molecular switch architectures and how these new systems can help with the realization of new functions and advancement of artificial molecular machines. Progress in chemically and photoinduced switches and motors is summarized and contextualized such that the reader may gain an appreciation for the novel tools that have come about in the past decade. Many of these systems offer distinct advantages over commonly employed switches, including improved fidelity, addressability, and robustness. Thus, this paper serves as a jumping-off point for researchers seeking new switching motifs for specific applications, or ones that address the limitations of presently available systems.

Solvent Effects on the Actinic Step of Donor-Acceptor Stenhouse Adduct Photoswitching

Donor-acceptor Stenhouse adducts (DASAs) are negative photochromes that switch with visible light and are highly promising for applications ranging from smart materials to biological systems. However, the strong solvent dependence of the photoswitching kinetics limits their application. The nature of the photoswitching mechanism in different solvents is key for addressing the solvatochromism of DASAs, but as yet has remained elusive. Here, we employ spectroscopic analyses and TD-DFT calculations to reveal changing solvatochromic shifts and energies of the species involved in DASA photoswitching. Time-resolved visible pump-probe spectroscopy suggests that the primary photochemical step remains the same, irrespective of the polarity and protic nature of the solvent. Disentangling the different factors determining the solvent-dependence of DASA photoswitching, presented here, is crucial for the rational development of applications in a wide range of different media.

The (photo)chemistry of Stenhouse photoswitches: guiding principles and system design

Molecular photoswitches comprise chromophores that can be interconverted reversibly with light between two states with different photochemical and physicochemical properties. This feature renders them useful for diverse applications, ranging from materials science, biology (specifically photopharmacology) to supramolecular chemistry. With new and more challenging systems to control, especially extending towards biomedical applications, using visible or near-infrared light for photoswitch activation becomes vital. Donor-acceptor Stenhouse adducts are a novel class of visible light-responsive negative photochromes that provide a possible answer to current limitations of other photoswitch classes in the visible and NIR window. Their rapid development since their discovery in 2014, together with first successful examples of applications, demonstrate both their potential and areas where improvements are needed. A better understanding of DASA characteristics and its photoswitching mechanism has revealed that they are in fact a subset of a more general structural class of photochromes, namely Stenhouse photoswitches. This tutorial review aims at providing an introduction and practical guide on DASAs: it focuses on their structure and synthesis, provides fundamental insights for understanding their photoswitching behavior and demonstrates guiding principles for tailoring these switches for given applications.

Photoswitching an Isolated Donor-Acceptor Stenhouse Adduct

Donor-acceptor Stenhouse adducts (DASAs) are a new class of photoswitching molecules with excellent fatigue resistance and synthetic tunability. Here, tandem ion mobility mass spectrometry coupled with laser excitation is used to characterize the photocyclization reaction of isolated, charge-tagged DASA molecules over the 450-580 nm range. The experimental maximum response at 530 nm agrees with multireference perturbation theory calculations for the S₁ ← S₀ transition maximum at 533 nm. Photocyclization in the gas phase involves absorption of at least two photons; the first photon induces Z-E isomerization from the linear isomer to metastable intermediate isomers, while the second photon drives another E-Z isomerization and 4π-electrocyclization reaction. Cyclization is thermally reversible in the gas phase with collisional excitation.

Multiple yet Controllable Photoswitching in a Single AIEgen System

Seeking new methods to obtain elaborate artificial on-demand photoswitching with multiple functionalities remains challenging. Most of the systems reported so far possess only one specific function and their nonemissive nature in the aggregated state inevitably limit their applications. Herein, a tailored cyanostilbene-based molecule with aggregation-induced emission characteristic was synthesized and was found to exhibit efficient, multiple and controllable photoresponsive behaviors under different conditions. Specifically, three different reactions were involved: (i) reversible Z/E isomerization under room light and thermal treatment in CH₃CN, (ii) UV-induced photocyclization with a concomitant dramatic fluorescence enhancement, and (iii) regio- and stereoselective photodimerization in aqueous medium with microcrystal formation. Experimental and theoretical analyses gave visible insights and detailed mechanisms of the photoreaction processes. Fluorescent 2D photopattern with enhanced signal-to-background ratio was fabricated based on the controllable "turn-on" and "turn-off" photobehaviors in different states. The present study thus paves an easy yet efficient way to construct smart multiphotochromes for unique applications.

Conformation-induced light emission switching of N-acylhydrazone systems

Bis-N-acylhydrazones bearing different substituents were found to display different colour emissions, through ESIPT or AIE, as a result of conformation switching, triggered by physical stimuli.

Stable and Photoswitchable Carbon-Dot Liposome

Carbon-dot (C-dot) liposome consisting of several thousands of C-dots shows interesting photoswitching properties. The water-dispersible C-dot liposome possesses intrinsic photoluminescence (PL) and is stable against salt and photoirradiation. The PL of C-dot liposome can be turned off and then on under photoirradiation over the wavelength regions of 510-540 nm and 365-420 nm, respectively. Like reported C-dots, the C-dot liposome emits various colors when excited at different wavelengths. Having great stability and high contrast, images of individual C-dot liposome have been recorded, showing negligible photoblinking. Through a simple photolithographic approach, micropatterns of C-dot liposomes emitting different colors have been fabricated.

Benzodioxinone Photochemistry in Macromolecular Science: Progress, Challenges, and Opportunities

This paper reviews the photoinduced reactions of benzodioxinones and how they function in polymer synthesis and UV curing applications. The mechanistic characteristics of the ketene and benzophenone production from the photolysis of benzodioxinone indicate that, under certain conditions, each intermediate may undergo further reactions expedient for the formation of various polymeric structures. While ketenes are efficient contributors to step-growth polymerization when subjected to reaction with the compounds possessing hydroxyl or amine groups, the released benzophenone can be utilized as a photoinitiator in both the free radical and cationic polymerizations. It has been shown that the photolysis of heterobifunctional monomers equipped with benzodioxinone and aliphatic hydroxyl groups leads to the formation of oligoesters with a narrow molecular weight distribution. We also validated the photochemical ability of benzodioxinone to induce the synthesis of block and graft copolymers, hybrid and branched polymers, and cross-linked monofunctional vinyl monomers or hydroxyl group-containing linear polymers.

Shedding Light on the Photoisomerization Pathway of Donor-Acceptor Stenhouse Adducts

Donor-acceptor Stenhouse adducts (DASAs) are negative photochromes that hold great promise for a variety of applications. Key to optimizing their switching properties is a detailed understanding of the photoswitching mechanism, which, as yet, is absent. Here we characterize the actinic step of DASA-photoswitching and its key intermediate, which was studied using a combination of ultrafast visible and IR pump-probe spectroscopies and TD-DFT calculations. Comparison of the time-resolved IR spectra with DFT computations allowed to unambiguously identify the structure of the intermediate, confirming that light absorption induces a sequential reaction path in which a Z-E photoisomerization of C2-C3 is followed by a rotation around C3-C4 and a subsequent thermal cyclization step. First and second-generation DASAs share a common photoisomerization mechanism in chlorinated solvents with notable differences in kinetics and lifetimes of the excited states. The photogenerated intermediate of the second-generation DASA was photo-accumulated at low temperature and probed with time-resolved spectroscopy, demonstrating the photoreversibility of the isomerization process. Taken together, these results provide a detailed picture of the DASA isomerization pathway on a molecular level.