Sub-4 nm PtZn Intermetallic Nanoparticles for Enhanced Mass and Specific Activities in Catalytic Electrooxidation Reaction

Pt2+-Exchanged ZIF-8 nanocube as a solid-state precursor for L10-PtZn intermetallic nanoparticles embedded in a hollow carbon nanocage

Nanoparticles with an atomically ordered alloy phase have received enormous attention for application as catalysts in fuel cells because of their unique electronic properties resulting from unusually strong d-orbital interactions between two metal components. However, the synthesis of intermetallic nanoparticles requires a high reaction temperature, thus necessitating the protection of nanoparticles with inorganic layers to prevent aggregation of nanoparticles during synthesis. The protective layer needs to be removed later for application as a catalyst, which is a cumbersome process. Herein, a novel synthetic strategy is reported for the preparation of L1₀-PtZn intermetallic nanoparticles by utilizing Pt²⁺-exchanged ZIF-8 nanocubes as a solid-state precursor. The Pt²⁺-exchanged ZIF-8 phase plays a dual role as a metal ion source for L1₀-PtZn nanoparticles and as a carbonaceous matrix that restrains the aggregation of nanoparticles during thermal treatment. The L1₀-PtZn nanoparticles embedded in a hollow carbon nanocage obtained from one-step annealing of Pt²⁺-exchanged ZIF-8 showed better electrocatalytic activity and durability toward methanol oxidation under acidic electrolyte conditions than those obtained from commercial Pt/C catalysts.

Sub-3 nm Intermetallic Ordered Pt3In Clusters for Oxygen Reduction Reaction

Industrial applications of Pt-based oxygen-reduction-reaction (ORR) catalysts are limited by high cost and low stability. Here, facile large-scale synthesis of sub-3-nm ordered Pt3In clusters on commercial carbon black as ORR catalyst that alleviates both these shortcomings is reported. As-prepared Pt3In/C exhibits a mass activity of 0.71 mA mg-1 and a specific area activity of 0.91 mA cm-2 at 0.9 V vs reversible hydrogen electrode, which are 4.1 and 2.7 times the corresponding values of commercial Pt/C catalysts. The as-prepared ordered Pt3In/C catalyst is also remarkably stable with negligible activity and structural decay after 20 000 accelerated electrochemical durability cycles, due to its ordered structure. Density-functional-theory calculations demonstrate that ordered-Pt3In is more energetically favorable for ORR than the commercial Pt/C catalysts because ∆G O is closer to the peak of the volcano plot after ordered incorporation of indium atoms.

Pore structure dependent activity and durability of mesoporous rhodium nanoparticles towards the methanol oxidation reaction

A significant porous structure effect of mesoporous rhodium nanoparticles on the electrocatalytic methanol oxidation reaction was reported.

Colloidal silver diphosphide (AgP2) nanocrystals as low overpotential catalysts for CO2 reduction to tunable syngas

Production of syngas with tunable CO/H₂ ratio from renewable resources is an ideal way to provide a carbon-neutral feedstock for liquid fuel production. Ag is a benchmark electrocatalysts for CO₂-to-CO conversion but high overpotential limits the efficiency. We synthesize AgP₂ nanocrystals (NCs) with a greater than 3-fold reduction in overpotential for electrochemical CO₂-to-CO reduction compared to Ag and greatly enhanced stability. Density functional theory calculations reveal a significant energy barrier decrease in the formate intermediate formation step. In situ X-ray absorption spectroscopy (XAS) shows that a maximum Faradaic efficiency is achieved at an average silver valence state of +1.08 in AgP₂ NCs. A photocathode consisting of a n⁺p-Si wafer coated with ultrathin Al₂O₃ and AgP₂ NCs achieves an onset potential of 0.2 V vs. RHE for CO production and a partial photocurrent density for CO at −0.11 V vs. RHE (j_{−0.11, CO}) of −3.2 mA cm⁻².

Conversion of CO₂ into value-added chemicals by use of renewable energy is promising to achieve a carbon-neutral energy cycle. Here, the authors show that AgP₂ is a stable, selective and efficient syngas catalyst for solar-to-fuel conversion with a 3-fold lower overpotential compared to the benchmark Ag catalyst.

Hollow PtFe Alloy Nanoparticles Derived from Pt-Fe3 O4 Dimers through a Silica-Protection Reduction Strategy as Efficient Oxygen Reduction Electrocatalysts

The development of efficient and stable electrocatalysts for the oxygen reduction reaction (ORR) is critical for the large-scale production of fuel cells. Platinum (Pt) nanoparticle catalysts show excellent performance for ORR, though the high cost of Pt is a limiting factor that directly impacts fuel cell production costs. Alloying Pt with other transition metals is an effective strategy to reduce Pt utilization whilst maintaining good ORR performance. In this work, novel hollow PtFe alloy catalysts were successfully synthesized by high-temperature pyrolysis of SiO₂ -coated Pt-Fe₃ O₄ nanoparticle dimers supported on carbon at 900 °C, followed by SiO₂ shell removal and partial dealloying of the PtFe nanoparticles formed using HF. The obtained hollow PtFe nanoparticle catalysts (denoted herein as PtFe-900) showed a 2.3-fold enhancement in ORR mass activity compared to PtFe nanoparticles synthesized without SiO₂ protection, and a remarkable 7.8-fold enhancement relative to a commercial Pt/C catalyst. Further, after 10 000 potential cycles, the ORR mass activity of PtFe-900 remained very high (90.9 % of the initial mass activity). The outstanding ORR performance of PtFe-900 can be attributed to the modification of Pt lattice and electronic structure by alloying with Fe at high temperature under the protection of the SiO₂ coating. This work guides the development of improved, highly dispersed Pt-based alloy nanoparticle catalysts for ORR and fuel cell applications.

Leaching- and sintering-resistant hollow or structurally ordered intermetallic PtFe alloy catalysts for oxygen reduction reactions

Carbon supported Pt-based alloy materials that have been developed for proton exchange membrane fuel cells (PEMFCs) are vulnerable to deactivation due to the loss of non-noble metal components (leaching) or detachment, migration and aggregation of active nanoparticles (sintering). Until now some methods have been developed to inhibit leaching or sintering individually. However, a route able to avoid leaching and sintering simultaneously is still lacking. Herein, we develop a thermally driven interfacial diffusion alloying route that allows for the direct evolution of solid Pt nanoparticles (NPs) supported on carbon (Pt/C) into a Pt-skin-like hollow PtFe alloy or a structurally ordered intermetallic PtFe alloy, together with in situ encapsulation of PtFe alloy NPs with a thin layer porous nitrogen-doped carbon (NC) shell. The robust NC shells not only effectively prevent Pt-based NPs from detachment, migration, and aggregation during accelerated durability tests but also allow smoother access of electrolyte to the Pt surface, thus allowing the catalysts to well preserve their high catalytic activity. The well-defined shape and atomic arrangement of PtFe alloy NPs exhibit over 600% increase in mass activity and specific activity when compared with that of the pristine Pt/C catalyst. Stability tests confirm that the ordered PtFe alloy is more electrochemically stable than the disordered hollow PtFe alloy and Pt/C catalysts due to its ordered atomic arrangement and the robust NC shell.

Fast Cryomediated Dynamic Equilibrium Hydrolysates towards Grain Boundary-Enriched Platinum Scaffolds for Efficient Methanol Oxidation

Although platinum nanocrystals have been considered as potential electrocatalysts for methanol oxidation reaction (MOR) in fuel cells, the large-scale practical implementation has been stagnated by their limited abundance, easy poisoning, and low durability. Here, grain boundary-enriched platinum (GB-Pt) scaffolds are produced in large scale via facilely reducing fast cryomediated dynamic equilibrium hydrolysates of platinum salts. Such plentiful platinum grain boundaries are originated from the fast fusion of short platinum nanowires during reduction of the individually and homogeneously dispersed platinum intermediates. These grain boundaries can provide abundant active sites to efficiently catalyze MOR and meanwhile enable to oxidize the adsorbed poisonous CO during the electrocatalytic process. As a consequence, the as-synthesized GB-Pt scaffolds exhibit an impressively high mass activity of 1027.1 mA mg_Pt⁻¹ for MOR, much higher than that of commercial Pt/C (345.2 mA mg_Pt⁻¹), as well as good stability up to 5000 cycles. We are confident that this synthetic protocol can be further extended to synthesize various grain boundary-enriched metal scaffolds with broad applications in catalysis.

Trimetallic Synergy in Intermetallic PtSnBi Nanoplates Boosts Formic Acid Oxidation

Platinum is the most effective metal for a wide range of catalysis reactions, but it fails in the formic acid electrooxidation test and suffers from severe carbon monoxide poisoning. Developing highly active and stable catalysts that are capable of oxidizing HCOOH directly into CO₂ remains challenging for commercialization of direct liquid fuel cells. A new class of PtSnBi intermetallic nanoplates is synthesized to boost formic acid oxidation, which greatly outperforms binary PtSn and PtBi intermetallic, benefiting from the synergism of chosen three metals. In particular, the best catalyst, atomically ordered Pt₄₅ Sn₂₅ Bi₃₀ nanoplates, exhibits an ultrahigh mass activity of 4394 mA mg^-1 Pt and preserves 78% of the initial activity after 4000 potential cycles, which make it a state-of-the-art catalyst toward formic acid oxidation. Density functional theory calculations reveal that the electronic and geometric effects in PtSnBi intermetallic nanoplates help suppress CO* formation and optimize dehydrogenation steps.

Ordered Intermetallic Pd3Bi Prepared by an Electrochemically Induced Phase Transformation for Oxygen Reduction Electrocatalysis

The synthesis of alloys with long-range atomic-scale ordering (ordered intermetallics) is an emerging field of nanochemistry. Ordered intermetallic nanoparticles are useful for a wide variety of applications such as catalysis, superconductors, and magnetic devices. However, the preparation of nanostructured ordered intermetallics is challenging in comparison to disordered alloys, hindering progress in material development. Herein, we report a process for converting colloidally synthesized ordered intermetallic PdBi₂ to ordered intermetallic Pd₃Bi nanoparticles under ambient conditions by electrochemical dealloying. The low melting point of PdBi₂ corresponds to low vacancy formation energies, which enables the facile removal of the Bi from the surface while simultaneously enabling interdiffusion of the constituent atoms via a vacancy diffusion mechanism under ambient conditions. The resulting phase-converted ordered intermetallic Pd₃Bi exhibits 11 times and 3.5 times higher mass activity and high methanol tolerance for the oxygen reduction reaction compared with Pt/C and Pd/C, respectively, which is the highest reported for a Pd-based catalyst, to the best of our knowledge. These results establish a key development in the synthesis of noble-metal-rich ordered intermetallic phases with high catalytic activity and set forth guidelines for the design of ordered intermetallic compounds under ambient conditions.

Disorder-to-Order Transition Mediated by Size Refocusing: A Route toward Monodisperse Intermetallic Nanoparticles

Intermetallic nanoparticles are remarkable due to their often enhanced catalytic, magnetic, and optical properties, which arise from their ordered crystal structures and high structural stability. Typical syntheses of intermetallic nanoparticles include thermal annealing of the disordered counterpart in atmosphere (or vacuum) or colloidal syntheses, where the phase transformation is achieved in solution. Although both methods can produce intermetallic nanoparticles, there is difficulty in achieving monodisperse nanoparticles, which is critical to exploiting their properties for various applications. Here, we show that overgrowth on random alloy AuCu nanoparticles mediated by size refocusing yields monodisperse intermetallic AuCu nanoparticles. Size refocusing has been used in syntheses of semiconductor and upconverting nanocrystals to achieve monodisperse samples, but now we demonstrate size refocusing as a mechanism to achieve the disorder-to-order phase transformation in multimetallic nanoparticles. The phase transformation was monitored by time evolution experiments, where analysis of reaction aliquots with transmission electron microscopy and powder X-ray diffraction revealed the generation and dissolution of small nanoparticles coupled with an increase in the average size of the nanoparticles and conversion to the ordered phase. This demonstration advances the understanding of intermetallic nanoparticle formation in colloidal syntheses, which can expedite the development of electrocatalysts and magnetic storage materials.

Octahedral gold-silver nanoframes with rich crystalline defects for efficient methanol oxidation manifesting a CO-promoting effect

Three-dimensional bimetallic nanoframes with high spatial diffusivity and surface heterogeneity possess remarkable catalytic activities owing to their highly exposed active surfaces and tunable electronic structure. Here we report a general one-pot strategy to prepare ultrathin octahedral Au₃Ag nanoframes, with the formation mechanism explicitly elucidated through well-monitored temporal nanostructure evolution. Rich crystalline defects lead to lowered atomic coordination and varied electronic states of the metal atoms as evidenced by extensive structural characterizations. When used for electrocatalytic methanol oxidation, the Au₃Ag nanoframes demonstrate superior performance with a high specific activity of 3.38 mA cm⁻², 3.9 times that of the commercial Pt/C. More intriguingly, the kinetics of methanol oxidation on the Au₃Ag nanoframes is counter-intuitively promoted by carbon monoxide. The enhancement is ascribed to the altered reaction pathway and enhanced OH⁻ co-adsorption on the defect-rich surfaces, which can be well understood from the d-band model and comprehensive density functional theory simulations.

Direct methanol fuel cells are promising for clean, sustainable energy, but catalysts should be optimized. Here the authors construct ultrathin nanoframes with rich crystalline defects to increase electrocatalytic activity of gold for methanol oxidation, which is surprisingly promoted by carbon monoxide.

Isolating contiguous Pt atoms and forming Pt-Zn intermetallic nanoparticles to regulate selectivity in 4-nitrophenylacetylene hydrogenation

Noble metals play a momentous role in heterogeneous catalysis but still face a huge challenge in selectivity control. Herein, we report isolating contiguous Pt atoms and forming Pt-Zn intermetallic nanoparticles as an effective strategy to optimize the selectivity of Pt catalysts. Contiguous Pt atoms are isolated into single atoms and Pt-Zn intermetallic nanoparticles are formed which are supported on hollow nitrogen-doped carbon nanotubes (PtZn/HNCNT), as confirmed by aberration-corrected high-resolution transmission electron microscopy and X-ray absorption spectrometry measurements. Interestingly, this PtZn/HNCNT catalyst promotes the hydrogenation of 4-nitrophenylacetylene to 4-aminophenylacetylene with a much higher conversion ( > 99%) and selectivity (99%) than the comparison samples with Pt isolated-single-atomic-sites (Pt/HNCNT) and Pt nanoparticles (Pt/CN). Further density functional theory (DFT) calculations disclose that the positive Zn atoms assist the adsorption of nitro group and Pt-Zn intermetallic nanoparticles facilitate the hydrogenation on nitro group kinetically.

In Situ Formed Pt3Ti Nanoparticles on a Two-Dimensional Transition Metal Carbide (MXene) Used as Efficient Catalysts for Hydrogen Evolution Reactions

The design of efficient catalysts capable of delivering high currents at low overpotentials for hydrogen evolution reactions (HERs) is urgently needed to use catalysts in practical applications. Herein, we report platinum (Pt) alloyed with titanium (Ti) from the surface of Ti₃C₂T_x MXenes to form Pt₃Ti intermetallic compound (IMC) nanoparticles (NPs) via in situ coreduction. In situ X-ray absorption spectroscopy (XAS) indicates that Pt undergoes a temperature-dependent transformation from single atoms to intermetallic compounds, and the catalyst reduced at 550 °C exhibits a superior HER performance in acidic media. The Pt/Ti₃C₂T_x-550 catalyst outperforms commercial Pt/Vulcan and has a small overpotential of 32.7 mV at 10 mA cm^-2 and a low Tafel slope of 32.3 mV dec^-1. The HER current was normalized by the mass and dispersion of Pt, and the mass activity and specific activity of Pt/Ti₃C₂T_x-550 are 4.4 and 13 times higher, respectively, than those of Pt/Vulcan at an overpotential of 70 mV. The density functional theory (DFT) calculations suggest that the (111)- and (100)-terminated Pt₃Ti nanoparticles exhibit *H binding comparable to Pt(111), while the (110) termination has an *H adsorption that is too exergonic, thus poisoned in the low overpotential region. This work demonstrates the potential of MXenes as platforms for the design of electrocatalysts and may spur future research for other MXene-supported metal catalysts that can be used for a wide range of electrocatalytic reactions.

H2-Induced coalescence of Pt nanoparticles for the preparation of ultrathin Pt nanowires with high-density planar defects

Construction of planar defects within a metallic catalyst can significantly improve its catalytic performance. However, it remains a huge challenge to introduce planar defects during the synthesis of metallic catalysts. In this work, we have reported an effective approach for the preparation of Pt nanowires with high-density planar defects. The success of the approach mainly relies on the attaching and merging of small Pt nanoparticles at low temperatures with the assistance of H2. By comparing the catalytic activities of Pt nanowires with high-density planar defects and commercial Pt/C catalysts toward methanol oxidation reactions, we show that the existence of planar defects can markedly enhance the electrocatalytic performance of the Pt nanowires. The Pt nanowires of 2.0 nm in diameter show a factor of 6.1 enhancement in specific activity and a factor of 5.4 enhancement in mass activity, respectively, for this reaction, compared to the commercial Pt/C catalyst. The method developed in this work could be an effective route to introduce planar defects within Pt catalysts, endowing them with much enhanced catalytic properties.

Intermetallic Nanoparticles: Synthetic Control and Their Enhanced Electrocatalysis

Intermetallic nanoparticles (NPs) described in this Account are a class of metallic alloy NPs within which metal atoms are bonded via strong d-orbital interaction and ordered anisotropically in a specific crystallographic direction. Compared to the common metallic alloy NPs with solid solution structure, intermetallic NPs are generally more stable against chemical oxidation and etching. The strict stoichiometry requirement, well-defined atom binding environment and layered atomic arrangement also make intermetallic NPs an ideal model for understanding their physical and catalytic properties. This account summarizes the synthetic principles and strategies developed to obtain monodisperse intermetallic NPs, especially tetragonal L1₀-NPs. The thermodynamics and kinetics involved in the conversion between disordered and ordered structures are briefly discussed. The synthetic methods are grouped into two slightly different categories: solution-phase synthesis followed by solid state annealing and direct solution-phase synthesis. In the former method, high-surface-area supports are often needed to disperse NPs and to prevent them from aggregation, while in the latter method such supports are not required since the structure conversion temperature is lowered to a level that the conversion can proceed in the solution reaction condition. In any of these two synthetic approaches, various factors influencing intermetallic structure formation should be carefully controlled to ensure more complete structural transition within NPs. Using representative synthetic examples, we highlight the strategies explored to facilitate the formation of intermetallic structure, including the introduction of vacancies/defects within NP structures and the control of atom addition rate/seed-mediated diffusion to lower the energy barrier. These strategies illustrate how the concept of thermodynamics and kinetics can be used to design the synthesis of intermetallic NPs. Additionally, to correlate NP structure and catalysis, we introduce briefly the d-band theory to explain how the electronic, strain and ensemble effects can be used to tune NP catalysis. We focus specifically on Pt-, Pd-, and Au-based L1₀-NPs and demonstrate how these L1₀-NPs could be prepared to show much enhanced catalysis for electrochemical reactions, including oxygen reduction reaction (ORR), hydrogen evolution reaction (HER), formic acid oxidation reaction (FAOR), and thermo-oxidation reaction of CO. Due to the enhanced metal atom stability in the "sandwich"-type structure, the roles of the first-row transition metal atoms in catalysis are better understood to achieve catalysis optimization. This concept can be extended to other alloy NPs, demonstrating great potentials in using intermetallic structures to control NP reduction and oxidation catalysis for important chemical and energy applications.

Ternary CoPtAu Nanoparticles as a General Catalyst for Highly Efficient Electro-oxidation of Liquid Fuels

Efficient electro-oxidation of formic acid, methanol, and ethanol is challenging owing to the multiple chemical reaction steps required to accomplish full oxidation to CO₂ . Herein, a ternary CoPtAu nanoparticle catalyst system is reported in which Co and Pt form an intermetallic L1₀ -structure and Au segregates on the surface to alloy with Pt. The L1₀ -structure stabilizes Co and significantly enhances the catalysis of the PtAu surface towards electro-oxidation of ethanol, methanol, and formic acid, with mass activities of 1.55 A/mg_Pt , 1.49 A/mg_Pt , and 11.97 A/mg_Pt , respectively in 0.1 m HClO₄ . The L1₀ -CoPtAu catalyst is also stable, with negligible degradation in mass activities and no obvious Co/Pt/Au composition changes after 10 000 potential cycles. The in situ surface-enhanced infrared absorption spectroscopy study indicates that the ternary catalyst activates the C-C bond more efficiently for ethanol oxidation.

Rational design of ordered Pd-Pb nanocubes as highly active, selective and durable catalysts for solvent-free benzyl alcohol oxidation

The selective oxidation of alcohols is an important chemical process with many potential applications in fine-chemical synthesis, however, the catalysts reported so far generally suffer from low activity and poor selectivity. We present here a class of ordered Pd3Pb nanocubes (NCs) with an intermetallic phase and well-defined surface as unique catalysts for selective oxidation of benzyl alcohol to benzaldehyde. The optimized Pd3Pb NCs exhibit both enhanced activity with the turnover frequency of 191 000 h-1 and excellent selectivity up to 91.0%, outperforming the Pd3Pb/Pd NCs and Pd3Pb nanoparticles (NPs) as well as Pd NPs. The Pd3Pb NCs show increased activity in the initially consecutive reaction cycles and do not suffer from distinct deactivation thereafter. X-ray photoelectron spectroscopy reveals that the high ratio of Pd2+ to Pd0 in the surface of Pd-Pb NPs enhances the benzaldehyde productivity, and the electronic modification of the Pd3Pb NCs boosts the benzaldehyde selectivity. Attenuated total reflectance infrared spectra further confirms that the weak benzaldehyde absorption on the Pd3Pb surface results in high selectivity of benzaldehyde.

Kinetics, energetics, and size dependence of the transformation from Pt to ordered PtSn intermetallic nanoparticles

The outstanding catalytic activity and chemical selectivity of intermetallic compounds make them excellent candidates for heterogeneous catalysis. However, the kinetics of their formation at the nanoscale is poorly understood or characterized, and precise control of their size, shape and composition during synthesis remains challenging. Here, using well-defined Pt nanoparticles (5 nm and 14 nm) encapsulated in mesoporous silica, we study the transformation kinetics from monometallic Pt to intermetallic PtSn at different temperatures by a series of time-evolution X-ray diffraction studies. Observations indicate an initial transformation stage mediated by Pt surface-controlled intermixing kinetics, followed by a second stage with distinct transformation kinetics corresponding to a Ginstling-Brounstein (G-B) type bulk diffusion mode. Moreover, the activation barrier for both surface intermixing and diffusion stages is obtained through the development of appropriate kinetic models for the analysis of experimental data. Our density-functional-theory (DFT) calculations provide further insights into the atomistic-level processes and associated energetics underlying surface-controlled intermixing.

Shape-control of one-dimensional PtNi nanostructures as efficient electrocatalysts for alcohol electrooxidation

Bimetallic one-dimensional (1D) nanostructures such as nanowires (NWs) and nanorods (NRs), serving as high-efficiency anode electrocatalysts, have attracted extensive attention in the past decade. However, the precise design and synthesis of 1D Pt-based nanocrystals with tunable morphology and size still remain an arduous challenge. Driven by this, we report a facile yet efficient strategy for the first time to prepare PtNi ultrafine NWs (UNWs), sinuous NWs (SNWs) and ultrashort NRs (UNRs) by adjusting the amount of citric acid, ascorbic acid and glucose. Detailed analysis of their electrocatalytic properties has indicated that the as-obtained PtNi SNWs exhibit the most outstanding electrocatalytic activity toward ethylene glycol oxidation reaction (EGOR) and glycerol oxidation (GOR), 4.5 and 4.3 times higher in mass activity as well as 4.3 and 3.9 times higher in specific activity compared with the commercial Pt/C catalyst. The as-prepared PtNi SNWs are also more stable than the commercial Pt/C catalyst after successive durability tests. The proposed method provides insight into more rational designs of bimetallic nanocatalysts with 1D architectures and the as-synthesized PtNi catalysts with improved electrocatalytic performance assist in promoting the further development of direct alcohol fuel cells (DAFCs).

Topological self-template directed synthesis of multi-shelled intermetallic Ni3Ga hollow microspheres for the selective hydrogenation of alkyne

Multi-shelled hollow structured materials featuring large void volumes and high specific surface areas are very promising for a variety of applications. However, controllable synthesis of multi-shelled hollow structured intermetallic compounds remains a formidable challenge due to the high annealing temperature commonly required for the formation of intermetallic phases. Here, a topological self-template strategy was developed to solve this problem. Using this strategy, we prepared well-defined multi-shelled intermetallic Ni3Ga hollow microspheres (Ni3Ga-MIHMs) as disclosed by the HAADF-STEM, HRTEM, and EDS characterizations, and the BET specific surface areas of them measured as much as 153.4 m2 g-1. XRD and EXAFS spectral characterizations revealed the atomically ordered intermetallic phase nature of the Ni3Ga-MIHMs. The selective hydrogenation of acetylene catalytic evaluation results further demonstrated excellent catalytic properties of the Ni3Ga-MIHMs, which results from the more energetically facile reaction pathway for acetylene hydrogenation and ethylene desorption over it as revealed by DFT calculations. Besides, this strategy is also extendable to synthesize other multi-shelled intermetallic Ni3Sn4 hollow microspheres, and is expected to open up new opportunities for rational design and preparation of novel structured and highly efficient intermetallics.

Shaping well-defined noble-metal-based nanostructures for fabricating high-performance electrocatalysts: advances and perspectives

This review highlights recent advances in shaping protocols and structure-activity relationships of noble-metal-based catalysts with well-defined nanostructures in electrochemical reactions.

High temperature self-assembly one-step synthesis of a structurally ordered PtFe catalyst for the oxygen reduction reaction

Herein, we present a high-temperature self-assembly strategy that directly allows the transformation of adsorbed Pt(NH₃)₄²⁺ and Fe³⁺ sources into structurally ordered face-centered tetragonal (fct)-PtFe alloy NPs (2.6 ± 0.2 nm).

Synthesis of germanium-platinum nanoparticles as high-performance catalysts for spray-deposited large-area dye-sensitized solar cells (DSSC) and the hydrogen evolution reaction (HER)

GePt3 and Ge2Pt nanoparticles were synthesized via a solution colloidal method as catalysts for dye-sensitized solar cells (DSSC) and the hydrogen evolution reaction (HER). The shape, size, arrangement, phases and crystalline structures of Ge-Pt nanoparticles were determined, and the ability to be dispersed in nonpolar solvents enabled them to form a catalyst ink with a stable ejection for the spray coating technique. A series of electrochemical analyses confirmed the catalytic properties of Ge-Pt nanoparticles toward the I-/I3- redox reaction system. The DSSC using GePt3 nanoparticles as the counter electrode exhibited excellent power conversion efficiency (PCE) of 8.04% at 0.16 cm2, which was comparable to that of a DSSC using Pt as the counter electrode (8.0%); it also exhibited an average PCE of 7.26% even at a large working area (2 cm2). In addition, the GePt3 catalyst exhibited excellent HER electrocatalytic performance with a large current density and a low Tafel slope, and it could stably operate at a working area of up to 5 cm2 with a low over potential (<0.06 V) to achieve 10 mA cm-2 cathodic current. This study provides fundamental insights into the preparation of germanium-platinum intermetallic compound catalysts at the nanoscale, which can be beneficial for the design and development of clean energy devices.

Random Alloyed versus Intermetallic Nanoparticles: A Comparison of Electrocatalytic Performance

As synthetic methods advance for metal nanoparticles, more rigorous studies of structure-function relationships can be made. Many electrocatalytic processes depend on the size, shape, and composition of the nanocatalysts. Here, the properties and electrocatalytic behavior of random alloyed and intermetallic nanoparticles are compared. Beginning with an introduction of metallic nanoparticles for catalysis and the unique features of bimetallic compositions, the discussion transitions to case studies of nanoscale electrocatalysts where direct comparisons of alloy and intermetallic compositions are undertaken for methanol electrooxidation, formic acid electrooxidation, the oxygen reduction reaction, and the electroreduction of carbon dioxide (CO2 ). Design and synthesis strategies for random alloyed and intermetallic nanoparticles are discussed, with an emphasis on Pt-M and Cu-M compositions as model systems. The differences in catalytic performance between alloys and intermetallic nanoparticles are highlighted in order to provide an outlook for future electrocatalyst design.

MOF-Confined Sub-2 nm Atomically Ordered Intermetallic PdZn Nanoparticles as High-Performance Catalysts for Selective Hydrogenation of Acetylene

Controllable synthesis of ultrasmall atomically ordered intermetallic nanoparticles is a challenging task, owing to the high temperature commonly required for the formation of intermetallic phases. Here, a metal-organic framework (MOF)-confined co-reduction strategy is developed for the preparation of sub-2 nm intermetallic PdZn nanoparticles, by employing the well-defined porous structures of calcinated ZIF-8 (ZIF-8C) and an in situ co-reduction therein. HAADF-STEM, HRTEM, and EDS characterizations reveal the homogeneous dispersion of these sub-2 nm intermetallic PdZn nanoparticles within the ZIF-8C frameworks. XRD, XPS, and EXAFS measurements further confirm the atomically ordered intermetallic phase nature of these sub-2 nm PdZn nanoparticles. Selective hydrogenation of acetylene evaluation results show the excellent catalytic properties of the sub-2 nm intermetallic PdZn, which result from the energetically more favorable path for acetylene hydrogenation and ethylene desorption over the ultrasmall particles than over larger-sized intermetallic PdZn as revealed by density functional theory (DFT) calculations. Moreover, this protocol is also extendable for the preparation of sub-2 nm intermetallic PtZn nanoparticles and is expected to provide a novel methodology in synthesizing ultrasmall atomically ordered intermetallic nanomaterials by rationally functionalizing MOFs.

Selective Etching Induced Synthesis of Hollow Rh Nanospheres Electrocatalyst for Alcohol Oxidation Reactions

The hollow noble metal nanostructures have attracted wide attention in catalysis/electrocatalysis. Here a two-step procedure for constructing hollow Rh nanospheres (Rh H-NSs) with clean surface is described. By selectively removing the surfactant and Au core of Au-core@Rh-shell nanostructures (Au@Rh NSs), the surface-cleaned Rh H-NSs are obtained, which contain abundant porous channels and large specific surface area. The as-prepared Rh H-NSs exhibit enhanced inherent activity for the methanol oxidation reaction (MOR) compared to state-of-the-art Pt nanoparticles in alkaline media. Further electrochemical experiments show that Rh H-NSs also have high activity for the electrooxidation of formaldehyde and formate (intermediate species in the course of the MOR) in alkaline media. Unfortunately, Rh H-NSs have low electrocatalytic activity for the ethanol and 1-propanol oxidation reactions in alkaline media. All electrochemical results indicate that the order of electrocatalytic activity of Rh H-NSs for alcohol oxidation reaction is methanol (C1 ) > ethanol (C2 ) > 1-propanol (C3 ). This work highlights the synthesis route of Rh hollow nanostructures, and indicates the promising application of Rh nanostructures in alkaline direct methanol fuel cells.

PDA-assisted formation of ordered intermetallic CoPt3 catalysts with enhanced oxygen reduction activity and stability

Structurally ordered intermetallic alloys with definite composition and distinct structure show great potential as electro-catalysts for the oxygen reduction reaction (ORR). However, their fabrication with small particle size remains a challenge since grain growth caused by high temperature annealing is unavoidable for the formation of the ordered phase. Here we propose an effective space-confined strategy to prepare an intermetallic alloy with small size (CoPt3/C-S) through annealing of the disordered Pt-Co alloy coated with polydopamine (PDA). The CoPt3/C-S intermetallic catalyst exhibits over 7-fold higher ORR activity and comparable stability compared to large intermetallic nanoparticles (CoPt3/C-L) prepared by direct heat-treatment without PDA. The superior ORR performance of the CoPt3/C-S catalyst can be attributed to the abundant active sites and unsaturated coordinated bonds caused by its special electronic structure, as proved by XPS and XAS tests. This work not only proposes a feasible synthesis route for small intermetallic nanoparticles but also provides a valid strategy to improve the ORR performance of ordered intermetallic catalysts.

Chemoselective Hydrogenation with Supported Organoplatinum(IV) Catalyst on Zn(II)-Modified Silica

Well-defined organoplatinum(IV) sites were grafted on a Zn(II)-modified SiO₂ support via surface organometallic chemistry in toluene at room temperature. Solid-state spectroscopies including XAS, DRIFTS, DRUV-vis, and solid-state (SS) NMR enhanced by dynamic nuclear polarization (DNP), as well as TPR-H₂ and TEM techniques revealed highly dispersed (methylcyclopentadienyl)methylplatinum(IV) sites on the surface ((MeCp)PtMe/Zn/SiO₂, 1). In addition, computational modeling suggests that the surface reaction of (MeCp)PtMe₃ with Zn(II)-modified SiO₂ support is thermodynamically favorable (Δ G = -12.4 kcal/mol), likely due to the increased acidity of the hydroxyl group, as indicated by NH₃-TPD and DNP-enhanced ¹⁷O{¹H} SSNMR. In situ DRIFTS and XAS hydrogenation experiments reveal the probable formation of a surface Pt(IV)-H upon hydrogenolysis of Pt-Me groups. The heterogenized organoplatinum(IV)-hydride sites catalyze the selective partial hydrogenation of 1,3-butadiene to butenes (up to 95%) and the reduction of nitrobenzene derivatives to anilines (up to 99%) with excellent tolerance of reduction-sensitive functional groups (olefin, carbonyl, nitrile, halogens) under mild reaction conditions.