Shape-Control of Pt–Ru Nanocrystals: Tuning Surface Structure for Enhanced Electrocatalytic Methanol Oxidation

Common Strategy: Mounting the Rod-like Ni-Based MOF on Hydrangea-Shaped Nickel Hydroxide for Superior Electrocatalytic Methanol Oxidation Reaction

Developing efficient metal-organic framework (MOF)-based electrocatalysts with improvable activity and persistence toward the methanol oxidation reaction (MOR) is attracting great research attention but still remains an enormous challenge. Herein, a facile strategy, hydrangea-shaped nickel hydroxide template-directed synthesis of the hierarchically structured Ni-MOF on the Ni(OH)₂ heterocomposite (denoted as Ni-Ni) for efficient MOR, is developed. The unique hierarchical structure and synergistic effect of the heterocomposite afford more exposed active sites, a facile ion diffusion path, and improved conductivity, favorable for improving MOR catalytic performance. Remarkably, the optimized Ni-Ni-2 material delivers an excellent activity with a high peak current density (24.6 mA cm^-2). Furthermore, to prove the universality of this strategy, Ni_xCu_1-x(OH)₂ isometallic hydroxide was used as the precursor, and a series of MOF-74/Cu_xNi_1-x(OH)₂ (denoted as Ni-NiCu) heterogeneous materials have been prepared and could be used as an effective electrocatalyst to catalyze MOR. The results indicate that this strategy can be used in the synthesis of other new composite materials with specific hierarchical structures for a more efficient electrocatalytic system.

Divergent Paths, Same Goal: A Pair-Electrosynthesis Tactic for Cost-Efficient and Exclusive Formate Production by Metal-Organic-Framework-Derived 2D Electrocatalysts

Electrosynthesis of formic acid/formate is a promising alternative protocol to industrial processes. Herein, a pioneering pair-electrosynthesis tactic is reported for exclusively producing formate via coupling selectively electrocatalytic methanol oxidation reaction (MOR) and CO₂ reduction reaction (CO₂ RR), in which the electrode derived from Ni-based metal-organic framework (Ni-MOF) nanosheet arrays (Ni-NF-Af), as well as the Bi-MOF-derived ultrathin bismuthenes (Bi-enes), both obtained through an in situ electrochemical conversion process, are used as efficient anodic and cathodic electrocatalysts, respectively, achieving concurrent yielding of the same high-value product at both electrodes with greatly reduced energy input. The as-prepared Ni-NF-Af only needs quite low potentials to reach large current densities (e.g., 100 mA cm^-2 @1.345 V) with ≈100% selectivity for anodic methanol-to-formate conversion. Meanwhile, for CO₂ RR in the cathode, the as-prepared Bi-enes can simultaneously exhibit near-unity selectivity, large current densities, and good stability in a wide potential window toward formate production. Consequently, the coupled MOR//CO₂ RR system based on the distinctive MOF-derived catalysts displays excellent performance for pair-electrosynthesis of formate, delivering high current densities and nearly 100% selectivity for formate production in both the anode and the cathode. This work provides a novel way to design advanced MOF-derived electrocatalysts and innovative electrolytic systems for electrochemical production of value-added feedstocks.

Interfacial Electron Engineering of Palladium and Molybdenum Carbide for Highly Efficient Oxygen Reduction

Interfacial electron engineering between noble metal and transition metal carbide is identified as a powerful strategy to improve the intrinsic activity of electrocatalytic oxygen reduction reaction (ORR). However, this short-range effect and the huge structural differences make it a significant challenge to obtain the desired electrocatalyst with atomically thin noble metal layers. Here, we demonstrated the combinatorial strategies to fabricate the heterostructure electrocatalyst of Mo₂C-coupled Pd atomic layers (AL-Pd/Mo₂C) by precise control of metal-organic framework confinement and covalent interaction. Both atomic characterizations and density functional theory calculations uncovered that the strong electron effect imposed on Pd atomic layers has intensively regulated the electronic structures and d-band center and then optimized the reaction kinetics. Remarkably, AL-Pd/Mo₂C showed the highest ORR electrochemical activity and stability, which delivered a mass activity of 2.055 A mg_Pd^-1 at 0.9 V, which is 22.1, 36.1, and 80.3 times higher than Pt/C, Pd/C, and Pd nanoparticles, respectively. The present work has developed a novel approach for atomically noble metal catalysts and provides new insights into interfacial electron regulation.

In Situ Small-Angle X-ray Scattering Studies on the Growth Mechanism of Anisotropic Platinum Nanoparticles

Shape-controlled platinum nanoparticles exhibit extremely high oxygen reduction activity. Platinum nanoparticles were synthesized by the reduction of a platinum complex in the presence of a soft template formed by organic surfactants in oleylamine. The formation of platinum nanoparticles was investigated using in situ small-angle X-ray scattering experiments. Time-resolved measurements revealed that different particle shapes appeared during the reaction. After the nuclei were generated, they grew into anisotropic rod-shaped nanoparticles. The shape, size, number density, reaction yield, and specific surface area of the nanoparticles were successfully determined using small-angle X-ray scattering profiles. Anisotropic platinum nanoparticles appeared at a low reaction temperature (∼100 °C) after a short reaction time (∼30 min). The aspect ratio of these platinum nanoparticles was correlated with the local packing motifs of the surfactant molecules and their stability. Our findings suggest that the interfacial structure between the surfactant and platinum nuclei can be important as a controlling factor for tailoring the aspect ratio of platinum nanoparticles and further optimizing the fuel cell performance.

Reconciling structure prediction of alloyed, ultrathin nanowires with spectroscopy

A number of complementary, synergistic advances are reported herein. First, we describe the 'first-time' synthesis of ultrathin Ru2Co1 nanowires (NWs) possessing average diameters of 2.3 ± 0.5 nm using a modified surfactant-mediated protocol. Second, we utilize a combination of quantitative EDS, EDS mapping (along with accompanying line-scan profiles), and EXAFS spectroscopy results to probe the local atomic structure of not only novel Ru2Co1 NWs but also 'control' samples of analogous ultrathin Ru1Pt1, Au1Ag1, Pd1Pt1, and Pd1Pt9 NWs. We demonstrate that ultrathin NWs possess an atomic-level geometry that is fundamentally dependent upon their intrinsic chemical composition. In the case of the PdPt NW series, EDS mapping data are consistent with the formation of a homogeneous alloy, a finding further corroborated by EXAFS analysis. By contrast, EXAFS analysis results for both Ru1Pt1 and Ru2Co1 imply the generation of homophilic structures in which there is a strong tendency for the clustering of 'like' atoms; associated EDS results for Ru1Pt1 convey the same conclusion, namely the production of a heterogeneous structure. Conversely, EDS mapping data for Ru2Co1 suggests a uniform distribution of both elements. In the singular case of Au1Ag1, EDS mapping results are suggestive of a homogeneous alloy, whereas EXAFS analysis pointed to Ag segregation at the surface and an Au-rich core, within the context of a core-shell structure. These cumulative outcomes indicate that only a combined consideration of both EDS and EXAFS results can provide for an accurate representation of the local atomic structure of ultrathin NW motifs.

Fabrication of a porous NiFeP/Ni electrode for highly efficient hydrazine oxidation boosted H2 evolution

Rational optimization of the surface electronic states and physical structures of non-noble metal nanomaterials is essential to improve their electrocatalytic performance. Herein, we report a facile dual-regulation strategy to fabricate NiFeP/Ni (P-NiFeP/Ni) porous nanoflowers, which involves Fe-doping and creating pores on nanosheets. The as-prepared P-NiFeP/Ni has a hierarchically porous surface, which exposes more electrochemically active sites and dramatically enhances the electron transfer rate. Thus, it exhibits excellent catalytic activity in both anodic hydrazine oxidation reaction (HzOR) and cathodic hydrogen evolution reaction (HER). Interestingly, the coupled electrolysis cell only offers a potential of 0.162 V at 10 mA cm^-2 to enable HzOR boosted H₂ evolution, highlighting an energy-saving hydrogen evolution strategy.

Pt-based (Zn, Cu) nanodendrites with enhanced catalytic efficiency and durability toward methanol electro-oxidation via trace Ir-doping engineering

Pt-based alloy nanomaterials with nanodendrites (NDs) structures are efficient electrocatalysts for methanol oxidation reaction (MOR), however their durability is greatly limited by the issue of transition metals dissolution. In this work, a facile trace Ir-doping strategy was proposed to fabricate Ir-PtZn and Ir-PtCu alloy NDs catalysts in aqueous medium, which significantly improved the electrocatalytic activity and durability for MOR. The as-prepared Ir-PtZn/Cu NDs catalysts showed distinct dendrites structures with the averaged diameter of 4.1 nm, and trace Ir doping subsequently improved the utilization of Pt atoms and promoted the oxidation efficiency of methanol. The electrochemical characterizations further demonstrated that the obtained Ir-PtZn/Cu NDs possessed enhanced mass activities of nearly 1.23 and 1.28-fold higher than those of undoped PtZn and PtCu, and approximately 2.35 and 2.67-fold higher than that of Pt/C in acid medium. More excitingly, after long-term durability test, the proposed Ir-PtZn and Ir-PtCu NDs still retained about 88.9% and 91.6% of its initial mass activities, which further highlights the key role of Ir-doping in determining catalyst performance. This work suggests that trace Ir-doping engineering could be a promising way to develop advanced electrocatalysts toward MOR for direct methanol fuel cell (DMFC) applications.

Platinum-Based Electrocatalysts for Direct Alcohol Fuel Cells: Enhanced Performances toward Alcohol Oxidation Reactions

In the past few decades, Pt-based electrocatalysts have attracted great interests due to their high catalytic performances toward the direct alcohol fuel cell (DAFC). However, the high cost, poor stability, and the scarcity of Pt have markedly hindered their large-scale utilization in commerce. Therefore, enhancing the activity and durability of Pt-based electrocatalysts, reducing the Pt amount and thus the cost of DAFC have become the keys for their practical applications. In this minireview, we summarized some basic concepts to evaluate the catalytic performances in electrocatalytic alcohol oxidation reaction (AOR) including electrochemical active surface area, activity and stability, the effective approaches for boosting the catalytic AOR performance involving size decrease, structure and morphology modulation, composition effect, catalyst supports, and assistance under other external energies. Furthermore, we also presented the remaining challenges of the Pt-based electrocatalysts to achieve the fabrication of a real DAFC.

Atomic Crystal Facet Engineering of Core-Shell Nanotetrahedrons Restricted under Sub-10 Nanometer Region

Simultaneously engineering the size and surface crystal facets of bimetallic core-shell nanocrystals offers an effective route to not only reduce the extravagance of innermost core metal and maximize the utilization efficiency of shell atoms but also strengthen the core-to-shell interaction via ligand and/or strain effects. Herein, we systematically study the architecture transition and crystal facet engineering at the atomic level on the surface of sub-5 nm Pd(111) tetrahedrons (Ths), aimed at embodying how the variations in the local facet and shape of a sub-10 nm core-shell structure affect its surface geometrical properties and electronic structures. Specifically, surface atomic replication is predominant when the shell metal deposits less than five atomic layers, thus forming a series of Pd@M (M = Pt, Ru, and Rh) core-shell Ths enclosed by (111) facets (∼6.8 nm), while over five atomic layers, spontaneous facets tropism of each metal is predominant, where Pt atoms still follow fcc-(111) packing, Ru atoms select hcp-phase stacking, and Rh atoms choose fcc-(100) crystallization, respectively. In particular, Pt atoms take a seamless geometrical transformation from Pd@Pt Ths into Pd@Pt truncated octahedrons (TOhs, ∼7.6 nm). As a proof-of-concept application, such sub-10 nm core-shell architectures with Pt skin show a component-dependent relationship toward oxygen reduction reaction (ORR), where the catalytic activity follows the order of Pd@Pt(111) TOhs (E_1/2 = 0.916 V, 1.632 A mg_Pt^-1) > Pd@Pt(111) Ths > Pt black. Meanwhile the Ru skin show a facet-dependent relationship toward acidic hydrogen evolution reaction (HER) where the catalytic activity follows the order of Pd@Ru(111) Ths > Pd@Ru(hcp) Ths > Pd Ths.

Atomically dispersed Ru in Pt3Sn intermetallic alloy as an efficient methanol oxidation electrocatalyst

We successfully fabricate a novel concave nanostructure that is composed of atomically dispersed Ru atoms in Pt₃Sn nanoconcaves (Ru-Pt₃Sn NCs), which shows enhanced performance in methanol electroxidation compared to commercial Pt/C. This could be ascribed to the stable intermetallic structure and active surface structure, as well as the synergy among Pt, Sn and Ru.

A review of the role and mechanism of surfactants in the morphology control of metal nanoparticles

Although great progress has been made in the synthesis of metal nanoparticles, good repeatability and accurate predictability are still difficult to achieve. This difficulty can be attributed to the synthetic method based primarily on observation and subjective experience, and the role of many surfactants remains unclear. It should be noted that surfactants play an important role in the synthetic process. Understanding their function and mechanism in the synthetic process is a prerequisite for the rational design of nanocatalysts with ideal morphology and performance. In this review article, the function of surfactants is introduced first, and then the mechanism of action of surfactants in controlling the morphology of nanoparticles is discussed according to the types of surfactants, and the promoting and sealing effects of surfactants on the crystal surface is revealed. The relationship between surfactants and the morphology structure of nanoparticles is studied. The removal methods of surfactants are discussed, and the existing problems in the current development strategy are summarized. Finally, the application of surfactants in controlling the morphology of metal nanocrystals is prospected. It is hoped that the review can open up new avenues for the synthesis of nanocrystals.

Flexible synthesis of Au@Pd core-shell mesoporous nanoflowers for efficient methanol oxidation

The design of bimetallic core-shell nanostructures with mesoporous surfaces is considered significant to strengthen the catalytic activity and stability for direct methanol fuel cells. Here, we report a flexible method to synthesize Au@Pd core-shell mesoporous nanoflowers (Au@mPd NFs) with Au core coated with mesoporous Pd nano-petals, in which polymeric micelle-assembled structures are used as templates to induce the formation of mesopores. Benefiting from the electronic and structural effects, Au@mPd NFs show excellent electrocatalytic activity and stability for methanol oxidation reaction in alkaline electrolytes. This study demonstrates a versatile strategy for the fabrication of core-shell mesoporous nanoflowers with adjustable composition.

Self-limiting self-assembly of supraparticles for potential biological applications

Nanotechnology has largely spurred the development of biological systems by taking advantage of the unique chemical, physical, optical, magnetic, and electrical properties of nanostructures. Self-limiting self-assembly of supraparticles produce new nanostructures and display great potential to create biomimicking nanostructures with desired functionalities. In this minireview, we summarize the recent developments and outstanding achievements of colloidal supraparticles, such as the driving forces for self-limiting self-assembly of supraparticles and properties of constructed supraparticles. Their application values in biological systems have also been illustrated.

Selective Ethanol Oxidation Reaction at the Rh-SnO2 Interface

Direct ethanol fuel cells (DEFCs) are regarded as an attractive power source with high energy density, bio-renewability, and convenient storage and transportation. However, the anodic reaction of DEFCs, that is, the ethanol oxidation reaction (EOR), suffers from poor efficiency due to the low selectivity to CO₂ (C1 pathway) and high selectivity to CH₃ COOH (C2 pathway). In this study, the selective EOR to CO₂ can be achieved at the Rh-SnO₂ interface in SnO₂ -Rh nanosheets (NSs). The optimized catalyst of 0.2SnO₂ -Rh NSs/C exhibits excellent alkaline EOR performance with a mass activity of 213.2 mA mg_Rh ^-1 and a Faraday efficiency of 72.8% for the C1 pathway, which are 1.7 and 1.9 times higher than those of Rh NSs/C. Mechanism studies indicate that the strong synergy at the Rh-SnO₂ interface significantly promotes the breaking of CC bond of C₂ H₅ OH to form CO₂ , and facilitates oxidation of the poisonous intermediates (^* CO and ^* CH₃ ) to suppress the deactivation of the catalyst. This work not only provides a highly selective, active, and stable catalyst for the EOR, but also promotes fundamental research for the design of efficient catalysts via interface modification.

Effect of Pd on the Electrocatalytic Activity of Pt towards Oxidation of Ethanol in Alkaline Solutions

The understanding of electrocatalytic activity and poisoning resistance properties of Pt and Pd nanoparticles, recognized as the best electrocatalysts for the ethanol oxidation reaction, is an essential step for the commercialization of direct ethanol fuel cells (DEFCs). In this paper, mono and bimetallic Pt and Pd nanoparticles with different atomic ratios have been synthesized to study their electrocatalytic properties for an ethanol oxidation reaction in alkaline solutions. The different nanoparticles were physiochemically characterized by transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The electrochemical characterization was performed by cyclic voltammetry and chronoamperometry measurements. The electrochemical measurements indicate that Pt nanoparticles have much higher electrocatalytic activity for ethanol oxidation than Pd nanoparticles. The studies with bimetallic PtPd nanoparticles showed a significant impact of their composition on the ethanol oxidation. Thus, the highest electrocatalytic activity and poisoning resistance properties were obtained for Pt3Pd2 nanoparticles. Moreover, this study demonstrates that the poisoning of the catalyst surface through ethanol oxidation is related to the prevalence of the acetaldehyde–acetate route and the polymerization of acetaldehyde through aldol condensation in the alkaline media.

Pt-based nanoparticles decorated by phosphorus-doped CuWO4 to enhance methanol oxidation activity

DMFCs are promising power storage devices, while for methanol oxidation reaction, weak catalysis and carbon monoxide poisoning greatly limit their wide commercialization, so it's greatly necessary to exploit the anode catalysts with high performance.

Convenient synthesis of polymetallic metal–organic gels for efficient methanol electro-oxidation

Novel Ni-based AlNiCu-MOG and AB&AlNiCu-MOG composite materials were successfully fabricated, which exhibited superior MOR activities with a current density of 17.1 and 33.24 mA cm⁻², respectively.

Selective electroreduction of CO2 to ethanol over a highly stable catalyst derived from polyaniline/CuBi2O4

We highlights the importance of surface evolution by electrochemical pre-treatment while stabilizing the main body of the catalyst. The PANi/CuBi2O4via electro-chemical activation process shows high faraday efficiency to ethanol.

PtPdCu cubic nanoframes as electrocatalysts for methanol oxidation reaction

PtPdCu cubic nanoframes with unique open architecture exhibit excellent electrocatalytic performances toward methanol electrooxidation.

Implanting Atomic Dispersed Ru in PtNi Colloidal Nanocrystal Clusters for Efficient Catalytic Performance in Electro-oxidation of Liquid Fuels

Although PtRu alloy nanocatalysts have been certified to possess excellent electrocatalytic performance and CO-poisoning tolerance toward formic acid and methanol electro-oxidation, the unaffordable usages of ruthenium (Ru) and platinum (Pt) have greatly limited their widespread adoption. Here, a facile one-pot method is reported for implanting atomic dispersed Ru in PtNi colloidal nanocrystal clusters with different Ru/Pt/Ni molar ratios, greatly reducing the dosages of Pt and Ru, and further improving the catalytic performances for the electro-oxidation of formic acid and methanol. Through simple control of the amount of Ni(acac)₂ precursor, trimetallic Ru_0.3 Pt_70.5 Ni_29.2 , Ru_0.6 Pt_55.9 Ni_43.5 , Ru_0.2 Pt_77.3 Ni_22.5 , and Ru_0.9 Pt_27.3 Ni_71.8 colloidal nanocrystal clusters (CNCs) are obtained. In particular, the Ru_0.3 Pt_70.5 Ni_29.2 CNCs exhibit excellent specific activities for formic acid and methanol electro-oxidation, that is, 14.2 and 15.3 times higher, respectively, than those of the Pt/C catalyst. Moreover, the Ru_0.3 Pt_70.5 Ni_29.2 CNCs also possess better anti-CO-poisoning properties and diffusion ability than the other RuPtNi CNCs. The excellent formic acid and methanol electro-oxidation activities of RuPtNi CNCs are ascribed to the optimal ligand effects derived from the Pt, Ni, and atomic dispersed Ru atoms, which can improve the OH adsorption ability and further the anti-CO-poisoning capability. This research opens a new door for increasing the electro-oxidation properties of liquid fuels by using lower dosages of noble metals in Pt-based catalysts.

The Effect of Shape-Controlled Pt and Pd Nanoparticles on Selective Catalytic Hydrodechlorination of Trichloroethylene

Tailoring the shape of nanoscale materials enables obtaining morphology-controlled surfaces exhibiting specific interactions with reactants during catalytic reactions. The specifics of nanoparticle surfaces control the catalytic performance, i.e., activity and selectivity. In this study, shape-controlled Platinum (Pt) and Palladium (Pd) nanoparticles with distinct morphology were produced, i.e., cubes and cuboctahedra for Pt and spheres and polyhedra/multiple-twins for Pd, with (100), (111 + 100), curved/stepped and (111) facets, respectively. These particles with well-tuned surfaces were subsequently deposited on a Zirconium oxide (ZrO2) support. The morphological characteristics of the particles were determined by high resolution transmission electron microscopy (HR-TEM) and X-ray diffraction (XRD), while their adsorption properties were investigated by Fourier transform infrared spectroscopy (FTIR) of CO adsorbed at room temperature. The effect of the nanoparticle shape and surface structure on the catalytic performance in hydrodechlorination (HDCl) of trichloroethylene (TCE) was examined. The results show that nanoparticles with different surface orientations can be employed to affect selectivity, with polyhedral and multiply-twinned Pd exhibiting the best ethylene selectivity.

Plasmon-Driven Electrochemical Methanol Oxidation on Gold Nanohole Electrodes

Direct methanol oxidation is expected to play a central role in low-polluting future power sources. However, the sluggish and complex electro-oxidation of methanol is one of the limiting factors for any practical application. To solve this issue, the use of plasmonic is considered as a promising way to accelerate the methanol oxidation reaction. In this study, we report on a novel approach for achieving enhanced methanol oxidation currents. Perforated gold thin film anodes were decorated with Pt/Ru via electrochemical deposition and investigated for their ability for plasmon-enhanced electrocatalytic methanol oxidation in alkaline media. The novel methanol oxidation anode (AuNHs/PtRu), combining the strong light absorption properties of a gold nanoholes array-based electrode (AuNHs) with surface-anchored bimetallic Pt/Ru nanostructures, known for their high activity toward methanol oxidation, proved to be highly efficient in converting methanol via the hot holes generated in the plasmonic electrode. Without light illumination, AuNHs/PtRu displayed a maximal current density of 13.7 mA/cm² at -0.11 V vs Ag/AgCl. Enhancement to 17.2 mA/cm² was achieved under 980 nm laser light illumination at a power density of 2 W/cm². The thermal effect was negligible in this system, underlining a dominant plasmon process. Fast generation and injection of charge carriers were also evidenced by the abrupt change in the current density upon laser irradiation. The good stability of the interface over several cycles makes this system interesting for methanol electro-oxidation.

A Phosphorus-Doped Ag@Pd Catalyst for Enhanced CC Bond Cleavage during Ethanol Electrooxidation

Ethanol is preferred to be oxidized into CO₂ for the construction of a high-performance direct ethanol fuel cell since this complete ethanol oxidation reaction (EOR) transfers 12 electrons. However, this EOR is sluggish and has the low activity as well as poor selectivity. To promote such a favorable EOR, more exactly the cleavage selectivity of CC bonds in ethanol, phosphorus-doped silver-core-and-Pd-shell catalysts (denoted as Ag@PdP) are designed and synthesized. In the alkaline media, a Ag@Pd₂ P_0.2 catalyst is superior toward EOR into CO₂ . It exhibits seven times higher mass activity and six times higher selectivity than the benchmark Pd/C catalyst. As confirmed by means of density functional theory calculation and in situ Fourier-transform infrared spectroscopy, such high performance stems from an increased adsorption energy of OH radicals on the Pd active sites. Meanwhile, the tensile strain effect of a core-shell structure of this Ag@Pd₂ P_0.2 catalyst favors the formation of adsorbed CH₃ CO intermediate, the key species for the enhanced C-C cleavage into CO₂ , instead of acetate. The proposed way to design and synthesize such high-performance EOR catalysts will explore the practical applications of direct alkaline ethanol fuel cells.

Bismuth Oxyhydroxide-Pt Inverse Interface for Enhanced Methanol Electrooxidation Performance

Developing efficient Pt-based electrocatalysts for the methanol oxidation reaction (MOR) is of pivotal importance for large-scale application of direct methanol fuel cells (DMFCs), but Pt suffers from severe deactivation brought by the carbonaceous intermediates such as CO. Here, we demonstrate the formation of a bismuth oxyhydroxide (BiO_x(OH)_y)-Pt inverse interface via electrochemical reconstruction for enhanced methanol oxidation. By combining density functional theory calculations, X-ray absorption spectroscopy, ambient pressure X-ray photoelectron spectroscopy, and electrochemical characterizations, we reveal that the BiO_x(OH)_y-Pt inverse interface can induce the electron deficiency of neighboring Pt; this would result in weakened CO adsorption and strengthened OH adsorption, thereby facilitating the removal of the poisonous intermediates and ensuring the high activity and good stability of Pt₂Bi sample. This work provides a comprehensive understanding of the inverse interface structure and deep insight into the active sites for MOR, offering great opportunities for rational fabrication of efficient electrocatalysts for DMFCs.

Random alloy and intermetallic nanocatalysts in fuel cell reactions

Fuel cells that use small organic molecules or hydrogen as the anode fuel can power clean electric vehicles. From an experimental perspective, the possible fuel cells' electrocatalytic reaction mechanisms are obtained through in situ electrochemical spectroscopy techniques and density functional theory calculations, providing theoretical guidance for further development of novel nanocatalysts. As advanced nanocatalysts for fuel cells' electrochemical reactions, alloy nanomaterials have greatly improved electrocatalytic activity and stability and have attracted widespread attention. Enhanced electrocatalytic performance of alloy nanocatalysts could be closely related to the synergistic effects, such as electronic and strain effects. Depending on the arrangement of atoms, alloys can be classified into random alloy and intermetallic compounds (ordered structure). Intermetallic compounds generally have lower heats of formation and stronger heteroatomic bonding strength relative to the random alloy, resulting in high chemical and structural stability in either full pH solutions or electrochemical tests. Here, we summarize the latest advances and the structure-function relationship of noble metal alloy nanocatalysts, among which Pt-based catalysts are the main ones, as well as comprehensively understand why they significantly affect the electrocatalytic performance of fuel cells. Novel alloy nanocatalysts with a robust three-phase interface to achieve efficient charge and mass transfer can obtain desirable activity and stability in the electrochemical workstation tests, and is expected to acquire a higher power density on fuel cell test systems with harsh test conditions.

Methanol Tolerant Pt-C Core-Shell Cathode Catalyst for Direct Methanol Fuel Cells

Methanol crossover is one of the largest problems in direct methanol fuel cells (DMFCs). Methanol passing from the anode to the cathode through the membrane is oxidized at the cathode, degrading the DMFC performance, and the intermediates of the methanol oxidation reaction (MOR) cause cathode catalyst poisoning. Therefore, it is essential to develop a cathode catalyst capable of inhibiting MOR while promoting the oxygen reduction reaction (ORR), which is a typical cathode reaction in DMFCs. In this study, a carbon-encapsulated Pt cathode catalyst was synthesized for this purpose. The catalyst was simply synthesized by heat treatment of Pt-aniline complex-coated carbon nanofibers. The carbon shell of the catalyst was effective in inhibiting methanol from accessing the Pt core, and this effect became more prominent as the graphitization degree of the carbon shell increased. Meanwhile, the carbon shell allowed O₂ to permeate regardless of the graphitization degree, enabling the Pt core to participate in ORR. The synthesized catalyst showed higher performance and stability in single-cell tests under various conditions compared to commercial Pt/C.

Design of 3D Hollow Porous Heterogeneous Nickel-Cobalt Phosphides for Synergistically Enhancing Catalytic Performance for Electrooxidation of Methanol

The synergistic effect among different components and the structural and morphological control of catalytic nanomaterials have attracted considerable research interest in the field of electrocatalysis, as using a rational design of the catalytic nanomaterials with the desired structure, morphology, and chemical compositions is an effective strategy for enhancing catalytic performance. Here, by changing the Ni/Co atomic ratio of raw materials, a series of samples with a three-dimensional (3D) hollow porous ternary multicomponent heterostructure has been successfully synthesized via a facile template-free solvothermal approach and subsequently annealing and phosphating treatments, and its formation mechanism is also investigated. By virtue of compositional and structural advantages, the optimized Ni₁Co₂P_x (NiCoP/CoP/CoP₂) nanoparticles show very high mass activity (436.9 mA mg^-1) and area-specific activity (155 mA cm^-2), as well as remarkable durability toward the methanol electrooxidation reaction (MOR) in alkaline solution. This catalytic activity is better than those of most of reported Ni/Co-based nonprecious metal catalysts. Particularly, a multicomponent synergistic effect on the MOR was observed. The present study not only provides a simple method for the fabrication of 3D hollow porous multicomponent composite nanomaterials, but also gives insights into the synergistic effect among the porous structure, chemical compositions, and catalytic activity of nanomaterials in the electrocatalytic oxidation of methanol.

Direct Synthesis of Ultrathin Pt Nanowire Arrays as Catalysts for Methanol Oxidation

High-performance electrocatalysts are of critical importance for fuel cells. Morphological modulation of the catalyst materials is a rare but feasible strategy to improve their performance. In this work, Pt nanowire arrays are directly synthesized with a template-less wet chemical method. The effects of surface functionalization and the reduction kinetics are revealed to be vital to the nanowire growth. The growth mechanism of the Pt nanowires is studied. By adjusting the concentration of the organic ligands, Pt nanowire arrays with tunable surface roughness can be obtained on various substrate surfaces. Such arrays avoid the contact resistance of randomly packed particles and allow open diffusion channels for reactants and products alike, making them excellent electrocatalysts for the methanol oxidation reaction. In particular, Pt nanowire arrays with rough surface have a mass activity of 1.24 A mg_Pt ^-1 at 1.12 V (vs Ag/AgCl), 3.18-fold higher than that of the commercial Pt/C catalysts. It also shows more resistant against poisoning, as indicated by the higher I_f /I_b ratio (2.06), in comparison to the Pt/C catalysts (1.30).