A General Strategy for Fabricating Isolated Single Metal Atomic Site Catalysts in Y Zeolite

Subnanometer Bimetallic Platinum-Zinc Clusters in Zeolites for Propane Dehydrogenation

Propane dehydrogenation (PDH) has great potential to meet the increasing global demand for propylene, but the widely used Pt-based catalysts usually suffer from short-term stability and unsatisfactory propylene selectivity. Herein, we develop a ligand-protected direct hydrogen reduction method for encapsulating subnanometer bimetallic Pt-Zn clusters inside silicalite-1 (S-1) zeolite. The introduction of Zn species significantly improved the stability of the Pt clusters and gave a superhigh propylene selectivity of 99.3 % with a weight hourly space velocity (WHSV) of 3.6-54 h^-1 and specific activity of propylene formation of 65.5 mol C 3 H 6  g_Pt ^-1  h^-1 (WHSV=108 h^-1 ) at 550 °C. Moreover, no obvious deactivation was observed over PtZn4@S-1-H catalyst even after 13000 min on stream (WHSV=3.6 h^-1 ), affording an extremely low deactivation constant of 0.001 h^-1 , which is 200 times lower than that of the PtZn4/Al₂ O₃ counterpart under the same conditions. We also show that the introduction of Cs⁺ ions into the zeolite can improve the regeneration stability of catalysts, and the catalytic activity kept unchanged after four continuous cycles.

Chemical Synthesis of Single Atomic Site Catalysts

Manipulating metal atoms in a controllable way for the synthesis of materials with the desired structure and properties is the holy grail of chemical synthesis. The recent emergence of single atomic site catalysts (SASC) demonstrates that we are moving toward this goal. Owing to the maximum efficiency of atom-utilization and unique structures and properties, SASC have attracted extensive research attention and interest. The prerequisite for the scientific research and practical applications of SASC is to fabricate highly reactive and stable metal single atoms on appropriate supports. In this review, various synthetic strategies for the synthesis of SASC are summarized with concrete examples highlighting the key issues of the synthesis methods to stabilize single metal atoms on supports and to suppress their migration and agglomeration. Next, we discuss how synthesis conditions affect the structure and catalytic properties of SASC before ending this review by highlighting the prospects and challenges for the synthesis as well as further scientific researches and practical applications of SASC.

Single-Atom Catalytic Materials for Advanced Battery Systems

Advanced battery systems with high energy density have attracted enormous research enthusiasm with potential for portable electronics, electrical vehicles, and grid-scale systems. To enhance the performance of conversion-type batteries, various catalytic materials are developed, including metals and transition-metal dichalcogenides (TMDs). Metals are highly conductive with catalytic effects, but bulk structures with low surface area result in low atom utilization, and high chemical reactivity induces unfavorable dendrite effects. TMDs present chemical adsorption with active species and catalytic activity promotes conversion processes, suppressing shuttle effect and improving energy density. But they suffer from inferior conductivity compared with metal, and limited sites mainly concentrate on edges and defects. Single-atom materials with atomic sizes, good conductivity, and individual sites are promising candidates for advanced batteries because of a large atom utilization, unsaturated coordination, and unique electronic structure. Single-atom sites with high activity chemically trap intermediates to suppress shuttle effects and facilitate electron transfer and redox reactions for achieving high capacity, rate capability, and conversion efficiency. Herein, single-atom catalytic electrodes design for advanced battery systems is addressed. Major challenges and promising strategies concerning electrochemical reactions, theoretical model, and in situ characterization are discussed to shed light on future research of single-atom material-based energy systems.

Zeolite-Enhanced Sustainable Pd-Catalyzed C-C Cross-Coupling Reaction: Controlled Release and Capture of Palladium

Supported palladium catalysts have attracted significant attention for use in cross-coupling reactions due to their recyclability. However, the inevitable progressive loss of Pd that occurs in the catalytic process deactivates the catalysts, which hinders their sustainable application. Herein, we report a zeolite-enhanced sustainable Pd catalyst for C-C cross-coupling reactions. Zeolite does a good job of acting as a sink for Pd²⁺ ions. This catalyst exhibits an excellent homogeneous catalytic performance by releasing Pd species from zeolite. In addition, the Pd²⁺ ions were successfully recaptured in a controlled catalytic system by combining the uniform microporous structure and good adsorption features of zeolite. The release/capture mechanism of the Pd species guaranteed the high loading and high dispersion of Pd on the recycled catalyst. The 0.84%Pd@USY catalysts were reused at least 10 times in water without an appreciable reduction in activity. This study presents a new perspective toward the design of a highly efficient and sustainable supported metal catalyst.

Atomic site electrocatalysts for water splitting, oxygen reduction and selective oxidation

This review summarized the fabrication routes and characterization methods of atomic site electrocatalysts (ASCs) followed by their applications for water splitting, oxygen reduction and selective oxidation.

Adsorption Behavior and Electron Structure Engineering of Pd-Based Catalysts for Acetylene Hydrochlorination

Adsorption and activation for substrates and the stability of Pd species in Pd-based catalysts are imperative for their wider adoption in industrial and practical applications. However, the influence factor of these aspects has remained unclear. This indicates a need to understand the various perceptions of the structure–function relationship that exists between microstructure and catalytic performance. Herein, we revisit the catalytic performance of supported-ionic-liquid-phase stabilized Pd-based catalysts with nitrogen-containing ligands as a promoter for acetylene hydrochlorination, and try to figure out their regulation. We found that the absolute value of the differential energy, |Eads(C2H2)-Eads(HCl)|, is negative correlated with the stability of palladium catalysts. These findings imply that the optimization of the electron structure provides a new strategy for designing highly active yet durable Pd-based catalysts.

Well-Defined Materials for Heterogeneous Catalysis: From Nanoparticles to Isolated Single-Atom Sites

The use of well-defined materials in heterogeneous catalysis will open up numerous new opportunities for the development of advanced catalysts to address the global challenges in energy and the environment. This review surveys the roles of nanoparticles and isolated single atom sites in catalytic reactions. In the second section, the effects of size, shape, and metal-support interactions are discussed for nanostructured catalysts. Case studies are summarized to illustrate the dynamics of structure evolution of well-defined nanoparticles under certain reaction conditions. In the third section, we review the syntheses and catalytic applications of isolated single atomic sites anchored on different types of supports. In the final part, we conclude by highlighting the challenges and opportunities of well-defined materials for catalyst development and gaining a fundamental understanding of their active sites.

A new cluster-based chalcogenide zeolite analogue with a large inter-cluster bridging angle

A new cluster-based chalcogenide zeolite analogue with a large inter-cluster bridging angle.