Stabilizing Effects of Various Polyelectrolyte Multilayer Films on the Structure of Adsorbed/Embedded Fibrinogen Molecules: An ATR−FTIR Study

Redox Processes of Cytochrome c Immobilized on Solid Supported Polyelectrolyte Multilayers

The heme protein cytochrome c (Cyt-c), immobilized on polyelectrolyte multilayers on a silver electrode, was studied by stationary and time-resolved surface-enhanced resonance Raman (SERR) spectroscopy to probe the redox site structure and the mechanism and dynamics of the potential-dependent interfacial processes. The layers were built up by sequential adsorption of polycations (poly[ethylene imine] (PEI); polyallylamine hydrochloride (PAH)) and polyanions (poly[styrene sulfonate] (PSS)). All multilayers terminated by PSS electrostatically bind Cyt-c. On PEI/PSS coatings, Cyt-c is peripherally bound and fully redox-active. Due to the interfacial potential drop, the apparent redox potential is lowered by 40 mV compared to that in solution. The rate constant for the heterogeneous electron transfer (ET) of ca. 0.1 s(-1) is consistent with electron tunneling through largely ordered PEI/PSS layers. ET is coupled to a reversible conformational transition of Cyt-c that involves a change of the coordination pattern of the heme. Additional (PAH/PSS) double layers cause a broadening of the redox transition and a drastic negative shift of the redox potential, which is attributed to the formation of PSS/Cyt-c complexes. It is concluded that Cyt-c can effectively compete with PAH for binding of PSS, resulting in a rearrangement of the layered structure and a penetration of the PSS-bound Cyt-c into the PAH/PSS double layers. This conclusion is consistent with SERR intensity and quartz microbalance measurements. ET was found to be overpotential-independent and faster than that for PEI/PSS coatings, which is interpreted in terms of specific PSS/Cyt-c complexes serving as gates for the heterogeneous ET.

Conformational Changes of Fibrinogen after Adsorption

The adsorption behavior of fibrinogen to two biomedical polyurethanes and a perfluorinated polymer has been investigated. Changes in the secondary structure of adsorbed fibrinogen were monitored using attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) and sum frequency generation vibrational spectroscopy (SFG). SFG measurements were performed in the amide I range as well as in the C-H/N-H stretching range. Amide I signals from SFG demonstrate that fibrinogen has post-adsorption conformational changes that are dependent upon the polymer surface properties. For example, strong attenuation of the amide I and N-H stretching signals with increasing residence time was observed for fibrinogen adsorbed to poly(ether urethane) but not for the other two polymers. This change is not readily observed by ATR-FTIR. Differences in the observed spectral changes for fibrinogen adsorbed to each polymer are explained by different initial binding mechanisms and post-adsorption conformational changes.

Interactions between self-assembled polyelectrolyte shells and tumor cells

Layer-by-layer self-assembled polyelectrolyte shells are a new class of micro/nanocapsules with unique physicochemical properties for potential applications in drug/gene delivery. The objective of this study was to investigate the interactions of polyelectrolyte shells ( approximately 1 mum in diameter) with MCF-7 breast cancer cells and identify key parameters that affect such interactions. Tailoring of surface properties of polyelectrolyte shells was achieved by choosing different outermost layer materials, including cationic polymers, anionic polymers, and lipid bilayers. Different surface compositions led to a wide range of electrostatic potentials from -46 to +47 mV in phophate-buffered saline buffer. Confocal microscopy studies showed that the polyelectrolyte shells were internalized into the cell cytoplasm, but not into the nuclei. Correlation of cell uptake with shell surface compositions was complicated by the adsorption of serum proteins on the surface of polyelectrolyte shells, particularly polycation-coated shells. To prevent protein adsorption, poly(ethylene glycol) (PEG) grafted poly(ethyleneimine) (PEI) copolymers (1:1, 1:5, 1:10 graft ratios) were synthesized and introduced on the shell surface. Shells coated with PEI-PEG copolymers effectively reduced protein adsorption whereas PEI-PEG copolymers with lower graft ratios achieved higher cell uptake efficiency after 24 h of incubation with MCF-7 cells.

Multilayers of a Globular Protein and a Weak Polyacid: Role of Polyacid Ionization in Growth and Decomposition in Salt Solutions

Thin films obtained from a layer-by-layer deposition of a weak polycarboxylic acid and a positively charged globular protein were studied by in situ ATR-FTIR. The system was chicken egg lysozyme (Lys), bovine pancrease ribonuclease A (RNase), or bovine gamma-globulin (IgG) self-assembled with polycarboxylic acids. When the pH value was lowered below a critical point, the growth of films and their tolerance to decomposition by added sodium chloride improved dramatically. Stabilization of protein/polyacid films in salt solutions at lower pH values occurred due to the onset of nonelectrostatic interactions to intermolecular binding within protein/polyacid multilayers and was controlled by polyacid ionization within the film rather than the pH of the external solution. A fractional ionization of polyacid in the pH-stabilization region was lower with protein-containing films than for polyacid/linear polycation films, reflecting hindrance of the inter-association of protonated carboxylic groups by protein globules. Practical ramifications of the pH-stabilization effect might extend to areas of biotechnology and biomaterials.

Spatial distribution of protein molecules adsorbed at a polyelectrolyte multilayer

The spatial distribution of protein molecules interacting with a planar polyelectrolyte multilayer was determined using neutron reflectometry. Staphylococcal nuclease (SNase) was used as model protein that was adsorbed to the multilayer at 22 degrees C and 42 degrees C. At each temperature, the protein solution was adjusted to pD -values of 4.9 and 7.5 to vary the net charge of the protein molecules. The multilayer was built up on a silicon wafer by the deposition of poly(ethylene imine) (PEI), poly(styrene sulfonate) (PSS), and poly(allylamine hydrochloride) (PAH) in the order Si-PEI-PSS- (PAH-PSS)(5). Applying the contrast variation technique, two different neutron reflectivity curves were measured at each condition of temperature and pD -value. From the analysis of the curves, protein density profiles normal to the interface were recovered. Remarkably, it has been found that SNase is partially penetrating into the polyelectrolyte multilayer after adsorption at all conditions studied. The measured neutron reflectivities are consistent with a penetration depth of 50 A at pD=4.9 and 25 A at pD=7.5. Since SNase has an isoelectric point of pH=9.5, it carries a net positive charge at both pD -values and interacts with the PSS final layer under electrostatic attraction conditions. However, when increasing the temperature, the amount of adsorbed protein is increasing at both pD -values indicating the dominance of entropic driving forces for the protein adsorption. Interestingly, at pD=4.9 where the protein charge is relatively high, this temperature-induced mass increase of immobilized protein is more pronounced within the polyelectrolyte multilayer, whereas at pD=7.5, closer to the isoelectric point of SNase, raising the temperature has mainly the effect to accumulate protein molecules outside the polyelectrolyte multilayer at the water interface. It is suggested that the penetration of SNase into the polyelectrolyte multilayer is related to a complexation mechanism. The complexation is essentially entropic in nature due to the release of counterions.

Effect of functionalization of multilayered polyelectrolyte films on motoneuron growth

We studied in vitro cell-substrate interaction of motoneurons with functionalized polylectrolyte films. Thin polylectrolyte films were built on glass by alternating polycations, poly(ethylene-imine) PEI, poly(L-lysine) PLL, or poly(allylamine hydrochloride) PAH, and polyanions, poly(sodium-4-styrenesulfonate) PSS or poly(L-glutamic acid) (PGA). These architectures were functionalized with Brain Derived Neurotrophic Factor (BDNF) or Semaphorin 3A (Sema3A). We used Optical Waveguide Lightmode Spectroscopy (OWLS) and Atomic Force Microscopy (AFM) to characterize the architectures. The viability of motoneurons was estimated by the acid phosphatase method, and morphometrical measures were performed to analyse the influence of different architectures on cell morphology. Motoneurons appeared to adhere and spread on all the architectures tested and preferentially on PSS ending films. The viability of motoneurons on polyelectrolyte multilayers was higher compared to polyelectrolyte monolayers. BDNF and Sema3A embedded in the films remained active and thereby create functionalized nanofilms.

Degradability of Polysaccharides Multilayer Films in the Oral Environment: an in Vitro and in Vivo Study

Biomedical devices and modified biomaterial surfaces constitute an expanding research domain in the dental field. However, such oral applications have to face a very particular environment containing specific physiological conditions and specific enzymes. To evaluate their suitability in the development of novel oral applications, the degradability of polyelectrolyte multilayer films made of the natural polysaccharides chitosan and hyaluronan (CHI/HA) was investigated in vitro and in vivo in a rat mouth model. The films were either native or cross-linked using a water-soluble carbodiimide (EDC) in combination with N-hydroxysulfosuccinimide. The in vitro degradation of the films by different enzymes present in the oral environment, such as lysozyme and amylase, was followed by quartz crystal microbalance measurements and confocal laser scanning microscopy observations after being film labeled with CHI(FITC). Whereas native films were subjected to degradation by all the enzymes, cross-linked films were more resistant to enzymatic degradation. Films were also put in contact with whole saliva, which induced a slow degradation of the native films over an 18 h period. The in vivo degradation of the films deposited on polymer disks and sutured in the rat mouth was followed over a 3 day period. Whereas film degradation is fast for native films, it is much slower for the cross-linked ones. More than 60% of these films remained on the disks after 3 days in the mouth. Taken together, these results suggest that the multilayer films made of natural polysaccharides are of high potential interest for oral applications, especially as drug release systems, offering various degradation rates and consequent release characteristics.

Impedance analysis of an electrode-separated piezoelectric sensor as a surface-monitoring technique for gelatin adsorption on quartz surface

The early events pertaining to gelatin adsorption and desorption onto quartz surfaces were studied, employing an electrode-separated piezoelectric sensor (ESPS). The adsorption of gelatin on a quartz crystal surface corresponds to a mass increase, which can be monitored in real time by the changes in the impedance parameters of the ESPS. It was shown that the adsorption of gelatin on a quartz surface is partly irreversible with respect to the dilution of the bulk phase. The observed adsorption kinetics is compatible with a mechanism that involves adsorption, desorption, and transformation from a reversible adsorption state to irreversible one. A progressive approach method was established to simulate the adsorption process. The adsorption densities and kinetic parameters in the early adsorption process were obtained from the responses of the ESPS in the adsorption process. The influence of pH and ionic strength was tested. A comparison with the Langmuir adsorption model was made.

Multilayered thin films that sustain the release of functional DNA under physiological conditions

The development of thin films and coatings that control the release of DNA from the surfaces of materials could have a significant impact on localized approaches to gene therapy. Here, we report multilayered polyelectrolyte assemblies that sustain the release of functional plasmid DNA from the surfaces of model substrates under physiological conditions. Multilayered assemblies consisting of alternating layers of plasmid DNA encoding for enhanced green fluorescent protein (EGFP) and a synthetic degradable polyamine were deposited on planar silicon and quartz substrates using a layer-by-layer fabrication process. Film growth was monitored by ellipsometry and UV spectrophotometry and correlated linearly with the number of polymer and plasmid layers deposited. In general, the thickness of deposited layers was found to be a function of both the pH and the ionic strength of the polyelectrolyte solutions used. Films up to 100 nm thick were investigated in this study. These assemblies erode gradually upon incubation in phosphate-buffered saline at 37 degrees C, as determined by ellipsometry and UV spectrophotometry, and sustain the release of incorporated plasmid into the incubation medium for a period of up to 30 h. Characterization of the released plasmid by agarose gel electrophoresis revealed that the DNA was released in a relaxed, open circular, rather than supercoiled, topology; subsequent cell transfection experiments demonstrated that the released plasmid is transcriptionally viable and promotes the expression of EGFP in the COS-7 cell line. These layered materials could represent an approach to the controlled administration of one or more functional DNA constructs from the surfaces of biomedical materials and devices.

Streptococcal antigen I/II binds to extracellular proteins through intermolecular beta-sheets

One of the functions associated with the oral streptococcal surface protein I/II is to bind to human extracellular matrix molecules or blood components, which could act as opportunistic ligands in pathological circumstances. In order to understand the relative specificity of the binding repertoire of this bacterial adhesin, we examined by infrared measurements the mode of binding of the protein I/II from Streptococcus mutans OMZ175 (I/IIf) to fibronectin and fibrinogen. This approach revealed the beta-structure forming capacity of I/IIf upon interaction with both proteins. The forming of intermolecular beta-structures may provide a non-selective way of interaction between I/IIf and its possible targets.

Human serum albumin self-assembly on weak polyelectrolyte multilayer films structurally modified by pH changes

Adsorption of proteins onto film surfaces built up layer by layer from oppositely charged polyelectrolytes is a complex phenomenon, governed by electrostatic forces, hydrogen bonds, and hydrophobic interactions. The amounts of the interacting charges, however, both in polyelectrolytes and in proteins adsorbed on such films are a function of the pH of the solution. In addition, the number and the accessibility of free charges in proteins depend on the secondary structure of the protein. The subtle interplay of all these factors determines the adsorption of the proteins onto the polyelectrolyte film surfaces. We investigated the effect of these parameters for polyelectrolyte films built up from weak "protein-like" polyelectrolytes (i.e., polypeptides), poly(L-lysine) (PLL), and poly(glutamic acid) (PGA) and for the adsorption of human serum albumin (HSA) onto these films in the pH range 3.0-10.5. It was found that the buildup of the polyelectrolyte films is not a simple function of the pure charges of the individual polyelectrolytes, as estimated from their respective pKa values. The adsorption of HSA onto (PLL/PGA)n films depended strongly on the polyelectrolyte terminating the film. For PLL-terminated polyelectrolyte films, at low pH, repulsion, as expected, is limiting the adsorption of HSA (having net positive charge below pH 4.6) since PLL is also positively charged here. At high pH values, an unexpected HSA uptake was found on the PGA-ending films, even when both PGA and HSA were negatively charged. It is suggested that the higher surface rugosity and the decrease of the alpha-helix content at basic pH values (making accessible certain charged groups of the protein for interactions with the polyelectrolyte film) could explain this behavior.

Protamine Assembled in Multilayers on Colloidal Particles Can Be Exchanged and Released

Biocomposite thin films assembled on colloidal particles by means of layer-by-layer adsorption have been suggested as drug carriers and diagnostic devices. Protamine (PRM)/dextransulfate (DXS) and protamine/bovine serum albumine (BSA) multilayers were fabricated on colloidal silica and subsequently investigated by means of fluorescence activated cell sorting (FACS) and microelectrophoresis. Fluorescein labeled polyelectrolytes were embedded at different positions in the multilayers as a marker for layer growth. FACS showed that PRM and DXS formed regular growing stable multilayers, yet adsorbed PRM can be nevertheless exchanged with PRM in solution during layer formation and also after the multilayer formation has been completed. Up to 90% of the PRM pool was available for exchange. PRM together with BSA as demonstrated by SFM did not form multilayers under the applied conditions although the zeta-potential, commonly used as an indicator for stepwise adsorption, observed characteristic alternations. The capability of bound PRM to exchange with PRM in solution is attributed to its relatively small size. The demonstrated exchange may have importance in designing multilayers with smart release features. Furthermore, FACS proved to be a rather suitable means to quantify the aggregation behavior during coating and washing. Singulets, doublets, triplets, and aggregates of higher order could be clearly resolved. The aggregation of particles coated with PRM/DXS layers was higher than that of silica particles coated with PAH/PSS layers. In the first case about 50% of all recorded events are attributed to aggregats, while the PAH/PSS coating produced only about 10% aggregates.

Protein Adsorption Modalities on Polyelectrolyte Multilayers

Protein adsorption on polyelectrolyte multilayers (PEMUs) was evaluated using a combination of synthetic polyelectrolytes and proteins, including serum albumin, fibrinogen, and lysozyme. Variables such as surface and protein charge, polymer hydrophobicity, and hydrophilic repulsion were introduced to probe interaction mechanisms. Quantitative analysis with reflectance Fourier transform infrared spectroscopy, optical waveguiding, and UV-vis absorption, together with qualitative information from atomic force microscopy, provided a coordinated picture for what drives protein adsorption and how the molecules are disposed on the multilayer surface. It was found that multilayers bearing a particular surface charge sorbed biomolecules if they were of opposite charge, yielding significant loadings within the bulk PEMU. Adsorption of like-charged proteins, as surface aggregates, occurred to a much lower extent, driven by nonelectrostatic forces. A diblock copolymer comprising a hydrophilic poly(ethylene oxide) block was capable of further minimizing protein adsorption as a result of hydrophilic repulsion, although none of the surfaces tested defeated protein adsorption completely. However, poly(acrylic acid) homopolymer was quite effective in this respect. A composition gradient, formed during multilayer buildup, induced a gradient in hydrophilicity through the PEMU, which is an efficient and economical method of creating a protein-resistant surface.

Secondary Structure Analysis of Proteins Embedded in Spherical Polyelectrolyte Brushes by FT-IR Spectroscopy

The adsorption of bovine serum albumin (BSA), bovine beta-lactoglobulin, and bovine pancreatic ribonuclease A onto spherical polyelectrolyte brushes (SPB) is reported. The SPB consist of narrowly distributed poly(styrene) core particles (diameter approximately 100 nm) onto which linear chains of anionic polyelectrolytes are grafted. The polyelectrolyte shell consists of either the weak polyelectrolyte poly(acrylic acid) or the strong polyacid poly(styrenesulfonate). The SPB particles are dispersed in H(2)O at room temperature. The secondary structure of the proteins was investigated by Fourier transform infrared spectroscopy in transmission mode before and during adsorption to these colloidal brushes. The alpha-helix and beta-sheet content of the proteins was nearly fully retained in the adsorbed state for all systems. Only in the case of BSA interacting with poly(styrenesulfonic) brushes could a slight loss of alpha-helix structure be observed. As the interaction of SPB and proteins can be controlled by the ionic strength in the buffer, additional experiments were performed to release the adsorbed protein. The amount of released protein was quantified and was found to be strongly dependent on the kind of protein and brush used. The secondary structure of the released proteins could be analyzed as well. An almost full preservation of secondary structure was found. This demonstrates that SPB are well-suited to immobilize proteins. The SPB can be charged and decharged under retention of the secondary structure of the biomolecules.

Fibronectin adsorption onto polyelectrolyte multilayer films

The Layer-by-layer deposition of positively and negatively charged macromolecular species is an ideal method for constructing thin films incorporating biological molecules. We investigate the adsorption of fibronectin onto polyelectrolyte multilayer (PEM) films using optical waveguide lightmode spectroscopy (OWLS) and atomic force microscopy (AFM). PEM films are formed by adsorption onto Si(Ti)O2 from alternately introduced flowing solutions of anionic poly(sodium 4-styrenesulfonate) (PSS) and cationic poly(allylamine hydrochloride) (PAH). Using OWLS, we find the initial rate and overall extent offibronectin adsorption to be greatest on PEM films terminated with a PAH layer. The polarizability density of the adsorbed protein layer, as measured by its refractive index, is virtually identical on both PAH- and PSS-terminated films; the higher adsorbed density on the PAH-terminated film is due to an adsorbed layer of roughly twice the thickness. The binding of monoclonal antibodies specific to the protein's cell binding site is considerably enhanced to fibronectin adsorbed to the PSS layer, indicating a more accessible adsorbed layer. With increased salt concentration, we find thicker PEM films but considerably thinner adsorbed fibronectin layers, owing to increased electrostatic screening. Using AFM, we find adsorbed fibronectin layers to contain clusters; these are more numerous and symmetric on the PSS-terminated film. By considering the electrostatic binding of a segmental model fibronectin molecule, we propose a picture of fibronectin adsorbed primarily in an end-on-oriented monolayer on a PAH-terminated film and as clusters plus side-on-oriented isolated molecules onto a PSS-terminated film.

Real-time analysis of protein adsorption to a variety of thin films

The ability of a fluorescence-based array biosensor to screen surfaces for the adsorption of biomolecules in real-time is demonstrated. Glass microscope slides were coated with silanes, including 3-mercaptopropyl-triethoxysilane, 3-glycidyloxypropyltrimethoxysilane, 3-aminopropyltrimethoxy-silane, octadecyl-trichlorosilane, and 2-methoxy((polyethylenoxy)propyl)tri-methoxysilane, or with polymer thin films, including polystyrene, polyimide, sol-gel, poly(dimethylsiloxane), and agarose. The adsorption of Cy5-labeled proteins, bovine serum albumin, fibrinogen, and lysozyme onto these surfaces was measured using total internal reflection spectroscopy over a period of 50 min. The majority of the modified surfaces, apart from notable exceptions including the thiol silane and PDMS, behaved as expected upon protein adsorption, and the observations could be related to the properties of both the individual surfaces and proteins. This study highlights the complex nature of the mechanisms involved when a protein interacts at a solid-liquid interface. However, it also demonstrates a comparatively generic method with which to screen surfaces for their protein resistant properties and to measure surface interactions in real time. Furthermore, since the array biosensor can perform multiple measurements simultaneously, the interactions of a variety of proteins with a single surface can be monitored.

Improvement of Stability and Cell Adhesion Properties of Polyelectrolyte Multilayer Films by Chemical Cross-Linking

Poly(L-lysine)/hyaluronan (PLL/HA) films were chemically cross-linked with a water soluble carbodiimide (EDC) in combination with a N-hydroxysulfo-succinimide (NHS) to induce amide formation. Fourier transform infrared spectroscopy confirms the conversion of carboxylate and ammonium groups into amide bonds. Quartz crystal microbalance-dissipation reveals that the cross linking reaction is accompanied by a change in the viscoelastic properties of the films leading to more rigid films. After the cross-linking reaction, both positively and negatively ending films exhibit a negative zeta potential. It is shown by fluorescence recovery after photobleaching measured by confocal laser scanning microscopy that cross-linking dramatically reduces the diffusion of the PLL chains in the network. Cross linking also renders the films highly resistant to hyaluronidase, an enzyme that naturally degrades hyaluronan. Finally, the adhesion of chondrosarcoma cells on the films terminating either with PLL or HA is also investigated. Whereas the non cross-linked films are highly resistant to cell adhesion, the cells adhere and spread well on the cross-linked films.

Mechanism of protein binding to spherical polyelectrolyte brushes studied in situ using two-photon excitation fluorescence fluctuation spectroscopy

We used two-photon excitation fluorescence fluctuation spectroscopy with photon counting histogram (PCH) analysis as a new tool to study the binding of globular proteins to colloidal particles in situ. Whereas fluorescence fluctuations are traditionally evaluated by calculating the autocorrelation function (fluorescence correlation spectroscopy), a complementary PCH analysis has been performed in this study which is advantageous when particle concentrations of a multicomponent system are of interest and the particles can be distinguished through particle brightness differences. The binding of two proteins, staphylococcal nuclease (SNase) and bovine serum albumin (BSA), to spherical polyelectrolyte brushes (SPB) was measured as a function of protein concentration and ionic strength of the solution at pH-values where SNase and BSA are positively and negatively charged, respectively. It has been found that SNase and BSA strongly bind to the SPB regardless of the protein charge. When the ionic strength of the solution is raised to 100 mM, the SPB become resistant to both proteins. These findings provide further evidence for a binding mechanism where the proteins are mainly driven to the SPB by the "counterion evaporation" force, while Coulomb interactions play a minor role. The results of this study characterize the potential of SPB as a new class of carrier particles for proteins whose use in biotechnological applications appears to be rewarding.

Incorporation of alkaline phosphatase into layer-by-layer polyelectrolyte films on the surface of affi-gel heparin beads: physicochemical characterization and evaluation of the enzyme stability

The preparation of functionalized beads in the micrometer size range that can be used to probe the action of immobilized biomolecules on cell cultures during controlled periods of time is of fundamental importance in cell biology. However, the preparation and characterization of such particles is tedious because of their fast sedimentation. It is hence difficult to prepare such beads in a reproducible manner. This highlights the need to prepare an important batch of functionnalized particles and to store them under conditions where the loss of biological activity is minimized. The aim of this paper was to immobilize alkaline phosphatase (AP) as a model enzyme on the surface of Affi-gel heparin beads functionnalized by means of a layer-by-layer (LBL) film made of poly-l-glutamic (PGA) acid and poly-l-lysine (PLL). The enzyme has been adsorbed either on the top of the LBL film or embedded under five polyelectrolyte layers. When embedded, the enzyme was not released in buffer and retained more than 30% of its initial activity after 3 months of storage at 4 degrees C. However, when the enzyme was adsorbed on top of the LBL film, about 80% of the adsorbed enzyme was released in the buffer after a few days of storage. Longer storage did not lead to any further desorption and the remaining enzyme displayed the same evolution of its activity with time as the embedded enzyme. The time evolution of the enzyme activity on the beads is compared with that in solution alone and in the presence of PGA and PLL separately.

Rational design of cytophilic and cytophobic polyelectrolyte multilayer thin films

Nanostructured polyelectrolyte multilayer thin films electrostatically assembled alternately from such polymers as poly(allylamine hydrochloride) (PAH) and poly(acrylic acid) (PAA) were investigated for their in vitro cell interactions. Not surprisingly, NR6WT cells, a highly adhesive murine fibroblast cell line, attached to many different multilayer combinations tested. However, PAH/PAA multilayers constructed at pH deposition conditions of 2.0/2.0 were completely bioinert. Analogous cell interactions were observed with PAH/poly(methacrylic acid) (PAH/PMA), PAH/sulfonated poly(styrene) (PAH/SPS), and poly(diallyldimethylammonium chloride)/SPS (PDAC/SPS) systems, thereby suggesting a general trend in the fibroblasts' response to multilayers. Specifically, highly ionically stitched films attracted cells, whereas weakly ionically cross-linked multilayers, which swell substantially in physiological conditions to present richly hydrated surfaces, resisted fibroblast attachment. Thus, by manipulating the multilayer pH or ionic strength assembly conditions or both, which in turn dictate the molecular architecture of the thin films, one may powerfully direct a single multilayer combination to be either cell adhesive or cell resistant.

Secondary structure of proteins adsorbed onto or embedded in polyelectrolyte multilayers

The structural changes of bovine serum albumin (BSA) and hen egg white lysozyme (HEL) upon their adsorption onto the surface or their embedding into the interior of poly(allylamine hydrochloride)-(poly(styrenesulfonate) (PAH-PSS) multilayer architectures were investigated by attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy. The presence of the polyelectrolytes seems, as previously observed for fibrinogen (J. Phys. Chem. B 2001, 105, 11906-11916), to prevent intermolecular interactions and, thus, protein aggregation at ambient temperature. The secondary structure of the proteins was somewhat altered upon adsorption onto the polyelectrolyte multilayers. The structural changes were larger when the charges of the multilayer outer layer and the protein were opposing. The adsorption of further polyelectrolyte layers onto protein-terminated architectures (i.e., embedding the proteins into a polyelectrolyte multilayer) did not cause considerable further changes in their secondary structures. The capacity of the polyelectrolyte architectures to delay the formation of intermolecular beta-sheets upon increasing temperatures was not uniform for the studied proteins. PSS in contact with HEL could largely prevent the heat-induced aggregation of HEL. In contrast, PAH had hardly any effect on the aggregation of BSA. The differences are explained on the basis of protein-polyelectrolyte interactions, affected mostly by the nature and the strength of the ionic interactions between the polyelectrolyte-protein contact surfaces.