An Electrochemical Approach to Investigate Gated Electron Transfer Using a Physiological Model System: Cytochrome c Immobilized on Carboxylic Acid-Terminated Alkanethiol Self-Assembled Monolayers on Gold Electrodes

Kinetics of the electron transfer reaction of Cytochrome c 552 adsorbed on biomimetic electrode studied by time-resolved surface-enhanced resonance Raman spectroscopy and electrochemistry

Cytochrome c (552) (Cyt-c (552)) and its redox partner ba ( 3 )-oxidase from Thermus thermophilus possess structural differences compared with Horse heart cytochrome c (cyt-c)/cytochrome c oxidase (CcO) system, where the recognition between partners and the electron transfer (ET) process is initiated via electrostatic interactions. We demonstrated in a previous study by surface-enhanced resonance Raman (SERR) spectroscopy that roughened silver electrodes coated with uncharged mixed self-assembled monolayers HS-(CH(2))( n )-CH(3)/HS-(CH(2))( n + 1)-OH 50/50, n = 5, 10 or 15, was a good model to mimic the Cyt-c (552) redox partner. All the adsorbed molecules are well oriented on such biomimetic electrodes and transfer one electron during the redox process. The present work focuses on the kinetic part of the heterogeneous ET process of Cyt-c (552) adsorbed onto electrodes coated with such mixed SAMs of different alkyl chain length. For that purpose, two complementary methods were combined. Firstly cyclic voltammetry shows that the ET between the adsorbed Cyt-c (552) and the biomimetic electrode is direct and reversible. Furthermore, it allows the estimation of both the density surface coverage of adsorbed Cyt-c (552) and the kinetic constants values. Secondly, time-resolved SERR (TR-SERR) spectroscopy showed that the ET process occurs without conformational change of the Cyt-c (552) heme group and allows the determination of kinetic constants. Results show that the kinetic constant values obtained by TR-SERR spectroscopy could be compared to those obtained from cyclic voltammetry. They are estimated at 200, 150 and 40 s(-1) for the ET of Cyt-c (552) adsorbed onto electrodes coated with mixed SAMs HS-(CH(2))( n )-CH(3)/HS-(CH(2))( n + 1)-OH 50/50, n = 5, 10 or 15, respectively.

Reorganization of immobilized horse and yeast cytochrome c induced by pH changes or nitric oxide binding

The redox properties of horse and yeast cytochrome c electrostatically immobilized on carboxylic acid-terminated self-assembled monolayers (SAMs) have been determined over a broad pH range (pH 3.5-8) in the absence and presence of nitric oxide. Below pH 6, both proteins exhibit comparable midpoint potentials, coverages, and electron-transfer rate constants, which suggests that they are adsorbed on the SAM in a similar fashion. Above pH 6, a sharp decrease in electron-transfer rate constants is observed for immobilized yeast cytochrome c, which is indicative of a change in the electron tunneling pathway between the heme and the electrode and hence suggests that the protein reorients on the surface. Such a decrease is not observed for horse cytochrome c and therefore must be related to the specific charge distribution on yeast cytochrome c. Apart from the charge distribution on the protein, the reorientation also seems to be related to the charge on the SAM surface. The presence of nitric oxide causes a decrease in electron-transfer rate constants of both yeast and horse cytochrome c at low pH. This is probably due to the fact that nitric oxide induces a conformational change of the protein and also changes the reorganization energy for electron transfer.

Electrochemical biosensors in nonaqueous solutions and their applications

This review first describes the invention of functional interfaces to promote biochemical redox reactions between substrates in dipolar aprotic solvents and enzymes or related compounds immobilized at the interface. The interfaces contain hydrophilic polymer membranes, a gold nanoparticle self-assembled electrode constructed by using rigid rod dithiols, and binary self-assembled monolayers composed of amino and carboxyl terminal groups. Other topics covered are: the electrochemical characterization of the hydrophilic polymer membrane; the development of biosensors to obtain reaction parameters of enzymatic and of electrochemical kinetics; and applications to the study of materials involved in metabolism.

Redox characteristics of a de novo quinone protein

The electrochemistry of 2,6-dimethylbenzoquinone (DMBQ) has been characterized for three different systems: DMBQ freely solvated in aqueous buffer; DMBQ bound to a neutral, blocked cysteine (N-acetyl-L-cysteine methyl ester) and the resulting DMBQ-bCys compound solvated in aqueous buffer; and DMBQ bound to a small model protein denoted alpha(3)C. The goal of this study is to detect and characterize differences in the redox properties of the protein-ligated DMBQ relative to the solvated quinones. The alpha(3)C protein used here is a tryptophan-32 to cysteine-32 variant of the structurally defined alpha(3)W de novo protein (Dai et al. J. Am. Chem. Soc. 2002, 124, 10952-10953). The properties of alpha(3)C were recently described (Hay et al. Biochemistry 2005, 44, 11891-11902). DMBQ was covalently bound to bCys and alpha(3)C through a sulfur substitution reaction with the cysteine thiol. In contrast to the solvated DMBQ and DMBQ-bCys compounds, diffusion controlled electrochemistry of DMBQ-alpha(3)C showed well-behaved and fully reversible n = 2 oxidation/reduction with a peak separation of approximately 30 mV between pH 5 and 9. DMBQ-alpha(3)C could also be immobilized on a gold electrode modified with a self-assembled monolayer of 3-mercaptopropionoic acid, allowing the measurement, by cyclic voltammetry, of an apparent rate of electron transfer of 22 s(-1). The (cysteine) sulfur substitution significantly lowers one of the hydroquinone pKA's from 10.4 in DMBQ to 6.8 in DMBQ-bCys. This pKA is slightly elevated in DMBQ-alpha(3)C to 7.0 and the E1/2 at pH 7.0 is raised by 110 mV from +190 mV in DMBQ-bCys to +297 mV in DMBQ-alpha(3)C.

Direct Electrochemical and Spectroscopic Assessment of Heme Integrity in Multiphoton Photo-Cross-Linked Cytochrome c Structures

Multiphoton excitation (MPE) lithography offers an effective, biocompatible technique by which three-dimensional architectures comprised of proteins, enzymes, and other relevant materials may be fabricated for use in biological studies involving cellular signal transduction and neuronal networking. We present a series of studies designed to investigate the integrity of cytochrome c (cyt c) photo-cross-linked via MPE. Specifically, we have used electrochemical methods and surface-enhanced Raman spectroscopy (SERS) to determine whether photo-cross-linked cyt c retains its well-characterized Fe(II/III) heme redox activity. Cyt c is observed to retain its native FeII/III electron-transfer properties, as the apparent electron-transfer rate constant, k0ET, for cyt c photo-cross-linked onto an indium-doped tin oxide (ITO) substrate was 8.4 +/- 0.2 s-1, on the same order of magnitude as literature values though somewhat slower than other immobilized cyt c studies, most likely due to unoptimized entrapment in the photo-cross-linked matrix. SERS data reveals peaks corresponding to vibrational modes of an intact porphyrin ring with the Fe center intact. Cyt c has also been shown to demonstrate peroxidase-like activity, and we have evaluated the turnover rate of H2O2 at photo-cross-linked matrices relative to that at adsorbed monolayers of cyt c on glass substrates. The photo-cross-linked cyt c samples demonstrate apparent Michaelis-Menten parameters of Vm = 0.34 fmol/s and kcat/Km on the order of 104 s-1 M-1, in agreement with previously published results for aqueous cyt c. Fluorescence data obtained for mediated H2O2 turnover also indicated enzymatic activity specifically at photo-cross-linked cyt c structures.

Electron transfer and ligand binding to cytochrome c' immobilized on self-assembled monolayers

We have successfully immobilized Allochromatium vinosum cytochrome c' on carboxylic acid-terminated thiol monolayers on gold and have investigated its electron-transfer and ligand binding properties. Immobilization could only be achieved for pH's ranging from 3.5 to 5.5, reflecting the fact that the protein is only sufficiently positively charged below pH 5.5 (pI = 4.9). Upon immobilization, the protein retains a near-native conformation, as is suggested by the observed potential of 85 mV vs SHE for the heme FeIII/FeII transition, which is close to the value of 60 mV reported in solution. The electron-transfer rate to the immobilized protein depends on the length of the thiol spacer, displaying distance-dependent electron tunneling for long thiols and distance-independent protein reorganization for short thiols. The unique CO-induced dimer-to-monomer transition observed for cytochrome c' in solution also seems to occur for immobilized cytochrome c'. Upon saturation with CO, a new anodic peak corresponding to the oxidation of an FeII-CO adduct is observed. CO binding is accompanied by a significant decrease in protein coverage, which could be due to weaker electrostatic interactions between the self-assembled monolayer and cytochrome c' in its monomeric form as compared to those in its dimeric form. The observed CO binding rate of 24 M-1 s-1 is slightly slower than the binding rate in solution (48 M-1 s-1), which could be due to electrostatic protein-electrode interactions or could be the result of protein crowding on the surface. This study shows that the use of carboxyl acid-terminated thiol monolayers as a protein friendly method to immobilize redox proteins on gold electrodes is not restricted to cytochrome c, but can also be used for other proteins such as cytochrome c'.

Impact of self-assembly composition on the alternate interfacial electron transfer for electrostatically immobilized cytochromec

We report on the effects of self-assembled monolayer (SAM) dilution and thickness on the electron transfer (ET) event for cytochrome c (CytC) electrostatically immobilized on carboxyl terminated groups. We observed biphasic kinetic behavior for a logarithmic dependence of the rate constant on the SAM carbon number (ET distance) within the series of mixed SAMs of C(5)COOH/C(2)OH, C(10)COOH/C(6)OH, and C(15)COOH/C(11)OH that is in overall similar to that found earlier for the undiluted SAM assemblies. However, in the case of C(15)COOH/C(11)OH and C(10)COOH/C(6)OH mixed SAMs a notable increase of the ET standard rate constant was observed, in comparison with the corresponding unicomponent (omega-COOH) SAMs. In the case of the C(5)COOH/C(2)OH composite SAM a decrease of the rate constant versus the unicomponent analogue was observed. The value of the reorganization free energy deduced through the Marcus-like data analysis did not change throughout the series; this fact along with the other observations indicates uncomplicated rate-determining unimolecular ET in all cases. Our results are consistent with a model that considers a changeover between the alternate, tunneling and adiabatic intrinsic ET mechanisms. The physical mechanism behind the observed fine kinetic effects in terms of the protein-rigidifying omega-COOH/CytC interactions arising in the case of mixed SAMs are also discussed.

Kinetic, Thermodynamic, and Mechanistic Patterns for Free (Unbound) Cytochromec at Au/SAM Junctions: Impact of Electronic Coupling, Hydrostatic Pressure, and Stabilizing/Denaturing Additives

Combined kinetic (electrochemical) and thermodynamic (calorimetric) investigations were performed for an unbound (intact native-like) cytochrome c (CytC) freely diffusing to and from gold electrodes modified by hydroxyl-terminated self-assembled monolayer films (SAMs), under a unique broad range of experimental conditions. Our approach included: 1) fine-tuning of the charge-transfer (CT) distance by using the extended set of Au-deposited hydroxyl-terminated alkanethiol SAMs [-S-(CH(2))(n)-OH] of variable thickness (n=2, 3, 4, 6, 11); 2) application of a high-pressure (up to 150 MPa) kinetic strategy toward the representative Au/SAM/CytC assemblies (n=3, 4, 6); 3) complementary electrochemical and microcalorimetric studies on the impact of some stabilizing and denaturing additives. We report for the first time a mechanistic changeover detected for "free" CytC by three independent kinetic methods, manifested through 1) the abrupt change in the dependence of the shape of the electron exchange standard rate constant (k(o)) versus the SAM thickness (resulting in a variation of estimated actual CT range within ca. 15 to 25 A including ca. 11 A of an "effective" heme-to-omega-hydroxyl distance). The corresponding values of the electronic coupling matrix element vary within the range from ca. 3 to 0.02 cm(-1); 2) the change in activation volume from +6.7 (n=3), to approximately 0 (n=4), and -5.5 (n=6) cm(3) mol(-1) (disclosing at n=3 a direct pressure effect on the protein's internal viscosity); 3) a "full" Kramers-type viscosity dependence for k(o) at n=2 and 3 (demonstrating control of an intraglobular friction through the external dynamic properties), and its gradual transformation to the viscosity independent (nonadiabatic) regime at n=6 and 11. Multilateral cross-testing of "free" CytC in a native-like, glucose-stabilized and urea-destabilized (molten-globule-like) states revealed novel intrinsic links between local/global structural and functional characteristics. Importantly, our results on the high-pressure and solution-viscosity effects, together with matching literature data, strongly support the concept of "dynamic slaving", which implies that fluctuations involving "small" solution components control the proteins' intrinsic dynamics and function in a highly cooperative manner as far as CT processes under adiabatic conditions are concerned.

Adsorption and in situ scanning tunneling microscopy of cysteine on Au(111): Structure, energy, and tunneling contrasts

The amino acid L-cysteine (Cys) adsorbs in highly ordered (3 square root of 3 x 6) R30 degrees lattices on Au(111) electrodes from 50 mM ammonium acetate, pH 4.6. We provide new high-resolution in situ scanning tunneling microscopy (STM) data for the L-Cys adlayer. The data substantiate previous data with higher resolution, now at the submolecular level, where each L-Cys molecule shows a bilobed feature. The high image resolution has warranted a quantum chemical computational effort. The present work offers a density functional study of the geometry optimized adsorption of four L-Cys forms-the molecule, the anion, the neutral radical, and its zwitterion adsorbed a-top-at the bridge and at the threefold hollow site of a planar Au(111) Au12 cluster. This model is crude but enables the inclusion of other effects, particularly the tungsten tip represented as a single or small cluster of W-atoms, and the solvation of the L-Cys surface cluster. The computational data are recast as constant current-height profiles as the most common in situ STM mode. The computations show that the approximately neutral radical, with the carboxyl group pointing toward and the amino group pointing away from the surface, gives the most stable adsorption, with little difference between the a-top and threefold sites. Attractive dipolar interactions screened by a dielectric medium stabilize around a cluster size of six L-Cys entities, as observed experimentally. The computed STM images are different for the different L-Cys forms. Both lateral and vertical dimensions of the radical accord with the observed dimensions, while those of the molecule and anion are significantly more extended. A-top L-Cys radical adsorption further gives a bilobed height profile resembling the observed images, with comparable contributions from sulfur and the amino group. L-Cys radical a-top adsorption therefore emerges as the best representation of L-Cys adsorption on Au(111).

On the Electron Transfer Mechanism Between Cytochrome c and Metal Electrodes. Evidence for Dynamic Control at Short Distances

Cytochrome c was coordinatively bound to self-assembled monolayers of pyridine-terminated alkanethiols on Au and Ag electrodes. The mechanism of heterogeneous electron transfer of the immobilized protein was investigated by cyclic voltammetry and time-resolved surface-enhanced resonance Raman spectroelectrochemistry. The temperature, distance, and overpotential dependencies of the electron transfer rates indicate a change of mechanism from a tunneling controlled reaction at long distances (thicker films) to a solvent/protein friction controlled reaction at smaller distances (thinner films).

Assembly dynamics and detailed structure of 1-propanethiol monolayers on Au(111) surfaces observed real time by in situ STM

1-Propanethiol is chosen as a model alkanethiol to probe detailed mechanisms of the self-assembled monolayer (SAM) formation at aqueous/Au(111) interfaces. The assembly processes, including initial physi- and chemisorption, pit formation, and domain growth, were recorded into movies in real-time with high resolution by in situ scanning tunneling microscopy (STM) under potential control. Two major adsorption steps were disclosed in the propanethiol SAM formation. The first step involves weak interactions accompanied by the lift of the Au(111) surface reconstruction, which depends reversibly on the electrochemical potentials. The second step is chemisorption to form a dense monolayer, accompanied by formation of pits as well as structural changes in the terrace edges. Pits emerged at the stage of the reconstruction lift and increased to a maximum surface coverage of 4.0 +/- 0.4% at the completion of the SAM formation. Well-defined triangular pits in the SAM were found on the large terraces (more than 300 nm wide), whereas few and small pinholes appeared at the terrace edge areas. Smooth edges were converted into saw-like structural features during the SAM formation, primarily along the Au(111) atomic rows. These observations suggest that shrinking and rearrangement of gold atoms are responsible for both formation of the pits and the shape changes of the terrace edges. STM images disclose a (2 square root 3 x 3)R30 degrees periodic lattice within the ordered domains. Along with electrochemical measurements, each lattice unit is assigned to contain four propanethiol molecules exhibiting different electronic contrasts, which might originate in different surface orientations of the adsorbed molecules.

Tuning the Rate and pH Accessibility of a Conformational Electron Transfer Gate

Methods to fine-tune the rate of a fast conformational electron transfer (ET) gate involving a His-heme alkaline conformer of iso-1-cytochrome c (iso-1-Cytc) and to adjust the pH accessibility of a slow ET gate involving a Lys-heme alkaline conformer are described. Fine-tuning the fast ET gate employs a strategy of making surface mutations in a substructure unfolded in the alkaline conformer. To make the slow ET gate accessible at neutral pH, the strategy involves mutations at buried sequence positions which are expected to more strongly perturb the stability of native versus alkaline iso-1-Cytc. To fine-tune the rate of the fast His 73-heme ET gate, we mutate the surface-exposed Lys 79 to Ala (A79H73 variant). This mutation also simplifies ET gating by removing Lys 79, which can serve as a ligand in the alkaline conformer of iso-1-Cytc. To adjust the pH accessibility of the slow Lys 73-heme ET gate, we convert the buried side chain Asn 52 to Gly and also mutate Lys 79 to Ala to simplify ET gating (A79G52 variant). ET kinetics is studied as a function of pH using hexaammineruthenium(II) chloride (a6Ru2+) to reduce the variants. Both variants show fast direct ET reactions dependent on [a6Ru2+] and slower gated ET reactions that are independent of [a6Ru2+]. The observed gated ET rates correlate well with rates for the alkaline-to-native state conformational change measured independently. Together with the previously reported H73 variant (Baddam, S.; Bowler, B. E. J. Am. Chem. Soc. 2005, 127, 9702-9703), the A79H73 variant allows His 73-heme-mediated ET gating to be fine-tuned from 75 to 200 ms. The slower Lys 73-heme (15-20 s time scale) ET gate for the A79G52 variant is now accessible over the pH range 6-8.

Determination of the Orientation of Adsorbed Cytochrome c on Carboxyalkanethiol Self-Assembled Monolayers by In Situ Differential Modification

The contact domain utilized by horse cytochrome c when adsorptively bound to a C(10)COOH self-assembled monolayer (SAM) was delineated using a chemical method based on differential modification of surface amino acids. Horse cytochrome c was adsorbed at low ionic strength (pH 7.0, 4.4 mM potassium phosphate) onto 10 microm diameter gold particles coated with HS(CH(2))(10)COOH SAMs. After in situ modification of lysyl groups by reductive Schiff-base methylation, the protein was desorbed, digested using trypsin, and the peptide mapped using LC/MS. Relative lysyl reactivities were ascertained by comparing the resulting peptide frequencies to control samples of solution cytochrome c modified to the same average extent. The least reactive lysines in adsorbed cytochrome c were found to be 13, 72, 73, 79, and 86-88, consistent with a contact region located up and to the left (Met-80 side) of the solvent-exposed heme edge (conventional front face view). The most reactive lysines were 39, 53, 55, and 60, located on the lower backside. The proposed orientation features a heme tilt angle of approximately 35-40 degrees with respect to the substrate surface normal. Factors that can complicate or distort data interpretation are discussed, and the generality of differential modification relative to existing in situ methods for protein orientation determination is also addressed.

The Redox Chemistry of the Covalently Immobilized Native and Low-pH Forms of Yeast Iso-1-cytochromec

Cyclic voltammetry experiments were carried out on native Saccharomyces cerevisiae iso-1-cytochrome c and its C102T/N62C variant immobilized on bare polycrystalline gold electrode through the S-Au bond formed by a surface cysteine. Experiments were carried out at different temperatures (5-65 degrees C) and pH values (1.5-7). The E degrees ' value at pH 7 (+370 mV vs SHE) is approximately 100 mV higher than that for the protein in solution. This difference is enthalpic in origin and is proposed to be the result of the electrostatic repulsion among the densely packed molecules onto the electrode surface. Two additional electrochemical waves are observed upon lowering the pH below 5 (E degrees ' = +182 mV) and 3 (E degrees ' = +71 mV), which are attributed to two conformers (referred to as "intermediate" and "acidic", respectively) featuring an altered heme axial ligation. This is the first determination of the reduction potential for low-pH conformers of cytochrome c in the absence of denaturants. Since the native form of cytochrome c can be restored, bringing back the pH to neutrality, the possibility offered by this transition to reversibly modulate the redox potential of cytochrome c is appealing for bioelectronic applications. The immobilized C102T/N62C variant, which differs from the native protein in the orientation of the heme group with respect to the electrode, shows very similar reduction thermodynamics. For both species, the rate constant for electron transfer between the heme and the electrode increases for the acidic conformer, which is also found to act as a biocatalytic interface for dioxygen reduction.

Order Parameters and Orientation Distributions of Solution Adsorbed and Microcontact Printed Cytochrome c Protein Films on Glass and ITO

The structure of solution adsorbed and microcontact printed (muCP) cytochrome c (cyt c) films on glass and indium tin oxide (ITO) was investigated using attenuated total reflectance (ATR) and total internal reflectance fluorescence (TIRF) spectroscopies to determine the orientation of the heme groups in the films. The second and fourth order parameters of the heme as well as information on the angle between the absorption and emission dipoles of the heme, gamma, were experimentally determined. The order parameters of the heme are related to the order parameters of the protein molecule using the known angle between the heme plane and the electrostatic dipole moment of the cyt c protein. The effect of the surface roughness of the substrates (glass and ITO) was also taken into account quantitatively using AFM data. Physically possible order parameters were obtained for the heme group in both solution adsorbed and muCP films, but not for the electrostatic dipole moment of the protein. In addition, the experimental values of {cos2 gamma} for immobilized zinc-substituted cyt c are greater than the values of {cos2 gamma} determined in viscous solutions, which could be an indication that the environment of the heme groups changes upon adsorption. The electron transfer behavior of solution adsorbed and muCP films on ITO, determined using electrochemical methods, is compared to their orientation distribution and surface coverage as determined by spectroscopic methods.

Potential-Modulated, Attenuated Total Reflectance Spectroscopy of Poly(3,4-ethylenedioxythiophene) and Poly(3,4-ethylenedioxythiophene Methanol) Copolymer Films on Indium−Tin Oxide

We report the first application of a potential-modulated spectroelectrochemical ATR (PM-ATR) instrument utilizing multiple internal reflections at an optically transparent electrode to study the charge-transfer kinetics and electrochromic response of adsorbed films. A sinusoidally modulated potential waveform was applied to an indium-tin oxide (ITO) electrode while simultaneously monitoring the optical reflectivity of thin (2-6 equivalent monolayers) copolymer films of poly(3,4-ethylenedioxythiophene) (PEDOT) and poly(3,4-ethylenedioxythiophene methanol) (PEDTM), previously characterized in our laboratory. At high modulation frequencies the measured response of the polymer film is selective toward the fastest electrochromic processes in the film, presumably those occurring within the first adsorbed monolayer. Quantitative determination of the electrochromic switching rate, derived from the frequency response of the attenuated reflectivity, shows a linear decrease in the rate, from 11 x 10(3) s(-1) to 3 x 10(3) s(-1), with increasing proportions of PEDTM in the copolymer, suggesting that interactions between the methanol substituent on EDTM and the ITO surface slow the switching process by limiting the rate of conformational change in the polymer film.

Solvent Isotope Effects on Interfacial Protein Electron Transfer in Crystals and Electrode Films

D(2)O-grown crystals of yeast zinc porphyrin substituted cytochrome c peroxidase (ZnCcP) in complex with yeast iso-1-cytochrome c (yCc) diffract to higher resolution (1.7 A) and pack differently than H(2)O-grown crystals (2.4-3.0 A). Two ZnCcP's bind the same yCc (porphyrin-to-porphyrin separations of 19 and 29 A), with one ZnCcP interacting through the same interface found in the H(2)O crystals. The triplet excited-state of at least one of the two unique ZnCcP's is quenched by electron transfer (ET) to Fe(III)yCc (k(e) = 220 s(-1)). Measurement of thermal recombination ET between Fe(II)yCc and ZnCcP+ in the D(2)O-treated crystals has both slow and fast components that differ by 2 orders of magnitude (k(eb)(1) = 2200 s(-1), k(eb)(2) = 30 s(-1)). Back ET in H(2)O-grown crystals is too fast for observation, but soaking H(2)O-grown crystals in D(2)O for hours generates slower back ET, with kinetics similar to those of the D(2)O-grown crystals (k(eb)(1) = 7000 s(-1), k(eb)(2) = 100 s(-1)). Protein-film voltammetry of yCc adsorbed to mixed alkanethiol monolayers on gold electrodes shows slower ET for D(2)O-grown yCc films than for H(2)O-grown films (k(H) = 800 s(-1); k(D) = 540 s(-1) at 20 degrees C). Soaking H(2)O- or D(2)O-grown films in the counter solvent produces an immediate inverse isotope effect that diminishes over hours until the ET rate reaches that found in the counter solvent. Thus, D(2)O substitution perturbs interactions and ET between yCc and either CcP or electrode films. The effects derive from slow exchanging protons or solvent molecules that in the crystal produce only small structural changes.

Syntheses of fully sulfonated polyaniline nano-networks and its application to the direct electrochemistry of cytochrome c

Fully sulfonated polyaniline nano-particles, nano-fibrils and nano-networks have been achieved for the first time by electrochemical homopolymerization of orthanilic acid using a three-step electrochemical deposition procedure in a mixed solvent of acetonitrile (ACN) and water. The diameter of the uniform nano-particles is about 60 nm, and the nano-fibrils can be organized in two-dimensional (2D) or three-dimensional (3D) non-periodic networks with good electrical contact. Average distance between contacts is about 850 and 600nm for a 2D and 3D system, respectively. The details of the poly(orthanilic acid) (POA) nano-structure were examined with a field emission scanning electron microscope (SEM). The structure and properties of POA were characterized with FTIR, UV-vis and electrochemical methods. The 3D POA nano-networks coated platinum electrode gave a direct electrochemical behavior of horse heart cytochrome c (Cyt c) immobilized on this electrode surface, a pair of well-defined redox waves with formal potential (E( degrees ')) of -0.032 V (versus Ag/AgCl) was achieved. The interaction between Cyt c and POA makes the formal potential shift negatively compared to that of Cyt c in solution. Spectrophotometric and electrochemical methods were used to investigate the interaction of Cyt c with POA. The immobilized Cyt c in the nano-networks POA film maintained its activity, showing a surface-controlled electrode process with the electron transfer rate constant (k(s)) of 21s(-1) and a of 0.53, and could be used for the electrocatalytic reduction of hydrogen peroxide. The quantitative determination of Cyt c by differential pulse voltammetry (DPV) using the fully sulfonated 3D POA nano-networks film coated platinum electrode was also studied.

Long-range interfacial electron transfer of metalloproteins based on molecular wiring assemblies

We address some physical features associated with long-range interfacial electron transfer (ET) of metalloproteins in both electrochemical and electrochemical scanning tunneling microscopy (ECSTM) configurations, which offer a brief foundation for understanding of the ET mechanisms. These features are illustrated experimentally by new developments of two systems with the blue copper protein azurin and enzyme nitrite reductase as model metalloproteins. Azurin and nitrite reductase were assembled on Au(111) surfaces by molecular wiring to establish effective electronic coupling between the redox centers in the proteins and the electrode surface for ET and biological electrocatalysis. With such assemblies, interfacial ET proceeds through chemically defined and well oriented sites and parallels biological ET. In the case of azurin, the ET properties can be characterized comprehensively and even down to the single-molecule level with direct observation of redox-gated electron tunnelling resonance. Molecular wiring using a pi-conjugated thiol is suitable for assembling monolayers of the enzyme with catalytic activity well-retained. The catalytic mechanism involves multiple-ET steps including both intramolecular and interfacial processes. Interestingly, ET appears to exhibit a substrate-gated pattern observed preliminarily in both voltammetry and ECSTM.

Phase separation of ternary self-assembled monolayers into hydrophobic 1-dodecanethiol domains and electrostatically stabilized hydrophilic domains composed of 2-aminoethanethiol and 2-mercaptoethanesulfonic acid on Au(111)

Ternary self-assembled monolayers (SAM) composed of 2-aminoethanethiol (AET), 2-mercaptoethanesulfonic acid (MES), and 1-dodecanethiol (DDeT) form two types of domains as if it were a two-component SAM: DDeT-rich hydrophobic domains and electrostatically stabilized hydrophilic domains composed of MES and AET on Au(111). MES and AET behave virtually as a single surface-active species. Two distinct reductive desorption peaks in cyclic voltammograms (CV) and binarized images of scanning tunneling microscopy clearly show nanometer scale, yet macroscopically distinguishable, phase separation over a wide range of the mixing ratio of DDeT and MES-AET in the bathing solution. X-ray photoelectron spectroscopy measurements indicate that the ratio of MES to AET in the hydrophilic domains is unity and that both terminal groups are in the charged states, that is, the sulfonate group and the ammonium group. With decreasing the total concentration of the thiols, the mole fraction of DDeT in the bathing solution at which the surface coverage of MES-AET domains is equal to that of DDeT domains dramatically decreases. This suggests that the adsorption kinetics plays a crucial role in the formation of the domains structure.

Redox Properties of Wild-Type and Heme-Binding Loop Mutants of Bacterial Cytochromes c Measured by Direct Electrochemistry

We have used protein film voltammetry (PFV) to determine the midpoint potentials of the Pseudomonas aeruginosa, Hydrogenobacter thermophilus, and Nitrosomonas europaea wild-type monoheme cytochromes c (cyts c; PA, HT, and NE, respectively), as well as PA N64Q, HT Q64N, and NE V65delta mutants, as a function of pH, and buffer conditions. Recent studies have suggested that the identity of the 64 position of the heme-binding loop (either Asn or Gln) strongly influences the conformation of the Met ligand that binds the heme iron. The PFV studies reveal that HT and NE possess significantly lower potentials (wild-type cyts c having E(m) values of +227 and +250 mV vs SHE) than PA (+290 mV) in 50 mM phosphate buffer, pH 7 at 3 degrees C. The HT Q64N mutant rises in potential compared to wild-type, and the PA N64Q mutant has a lower potential, indicating relationships between Met ligand fluxion, hydrogen bonding to the Met ligand, and redox chemistry. Surprisingly, NE V65delta, possessing a heme binding loop nearly identical to that of the PA protein, displayed an E(m) of +232 mV, even lower than wild-type NE. These data are discussed in terms of models of Met ligand properties and proton dependence.

Long-range protein electron transfer observed at the single-molecule level: In situ mapping of redox-gated tunneling resonance

A biomimetic long-range electron transfer (ET) system consisting of the blue copper protein azurin, a tunneling barrier bridge, and a gold single-crystal electrode was designed on the basis of molecular wiring self-assembly principles. This system is sufficiently stable and sensitive in a quasi-biological environment, suitable for detailed observations of long-range protein interfacial ET at the nanoscale and single-molecule levels. Because azurin is located at clearly identifiable fixed sites in well controlled orientation, the ET configuration parallels biological ET. The ET is nonadiabatic, and the rate constants display tunneling features with distance-decay factors of 0.83 and 0.91 A(-1) in H(2)O and D(2)O, respectively. Redox-gated tunneling resonance is observed in situ at the single-molecule level by using electrochemical scanning tunneling microscopy, exhibiting an asymmetric dependence on the redox potential. Maximum resonance appears around the equilibrium redox potential of azurin with an on/off current ratio of approximately 9. Simulation analyses, based on a two-step interfacial ET model for the scanning tunneling microscopy redox process, were performed and provide quantitative information for rational understanding of the ET mechanism.

Effects of interface mutations on association modes and electron-transfer rates between proteins

Although bonding networks determine electron-transfer (ET) rates within proteins, the mechanism by which structure and dynamics influence ET across protein interfaces is not well understood. Measurements of photochemically induced ET and subsequent charge recombination between Zn-porphyrin-substituted cytochrome c peroxidase and cytochrome c in single crystals correlate reactivity with defined structures for different association modes of the redox partners. Structures and ET rates in crystals are consistent with tryptophan oxidation mediating charge recombination reactions. Conservative mutations at the interface can drastically affect how the proteins orient and dispose redox centers. Whereas some configurations are ET inactive, the wild-type complex exhibits the fastest recombination rate. Other association modes generate ET rates that do not correlate with predictions based on cofactor separations or simple bonding pathways. Inhibition of photoinduced ET at <273 K indicates gating by small-amplitude dynamics, even within the crystal. Thus, different associations achieve states of similar reactivity, and within those states conformational fluctuations enable interprotein ET.

Impact of surface immobilization and solution ionic strength on the formal potential of immobilized cytochrome C

Four different self-assembled monolayer (SAM) electrode systems were examined electrochemically in order to better understand surface charge effects on the redox thermodynamics of immobilized horse heart cytochrome c (cyt c). Neutralization of protein surface charge upon adsorption on anionic COOH-terminated SAMs was found to cause substantial changes in the formal potential, as determined by cyclic voltammetry. For cyt c immobilized on negatively charged surfaces, the formal potential shifted to more negative values as the ionic strength was decreased, which is opposite to the trend displayed by solution cyt c. In contrast, immobilization to uncharged interfaces resulted in an ionic strength dependence for cyt c that is similar to its solution behavior. The results provide insight into the importance of surface charge on the formal potential of cyt c.

Properties of galactocerebroside layers transferred to glassy carbon electrodes: effect of an applied electric field

Galactocerebroside films deposited onto glassy carbon electrodes have been previously studied through the electrochemical response of a redox couple present in solution. Those experiments indicated that the film is inhomogeneous and that there are lipid-free places. In this work, we present experimental results indicating that those bare regions are formed when the electrode is introduced in an aqueous solution, and that the size and/or amount of uncovered domains increase when negative potentials are applied to the film. The experimental techniques employed for these findings are epifluorescence microscopy and ellipsometry.

Effect of mono-CDNP substitution of lysine residues on the redox reaction of cytochrome c electrostatically adsorbed on a mercaptoheptanoic acid modified Au(111) surface

The effect of charge-inverting modification of single surface lysine residue on the electron transfer (ET) reaction of horse heart cytochrome c (cyt c) is examined for 12 different types of mono-4-chloro-2,5-dinitrobenzoic acid substituted cyt c (mCDNPc) adsorbed on a Au(111) electrode modified with a self-assembled monolayer (SAM) of 7-mercapto-heptanoic acid (MHA). A negative shift in the redox potential by 10-35 mV as compared to that of native cyt c and a monolayer coverage in the range of 13-17 pmol cm(-2) are observed for electroactive mCDNPc's. The magnitude of the decrease in the ET rate constant (k(et)) of mCDNPc's compared with that of native cyt c depends on the position of the CDNP substitution. For mCDNPc's in which the modified lysine residue is outside of the interaction domain of cyt c with the SAM, the ratio of the k(et) of mCDNPc to that of native cyt c is correlated to the change in the dipole moment vector of cyt c due to the CDNP modification. This correlation suggests that the dipole moment of cyt c determines its orientation of adsorption on the SAM of MHA and significantly affects the rate of the ET. The CDNP modification of lysine residues at the interaction domain significantly decreases the rate, demonstrating the importance of the local charge environment in determining the rate of ET.

Effect of the electrostatic interaction on the redox reaction of positively charged cytochrome C adsorbed on the negatively charged surfaces of acid-terminated alkanethiol monolayers on a Au(111) electrode

The electrochemical properties of cytochrome c (cyt c) adsorbed on mixed self-assembled monolayers (SAMs) of 2-mercaptoethanesulfonate (MES)/2-mercaptoethanol (MEL) are compared with those on single-component SAMs of MES, MEL, and mercaptopropionic acid (MPA), using cyclic voltammetry and potential-modulated UV-vis reflectance spectroscopy. The rate constant of electron transfer (ET), k(et), of cyt c adsorbed on the SAM of MPA decreases from 1450 +/- 210 s(-1) at pH 7 to 890 +/- 100 s(-1) at pH 9. In contrast, the value of k(et) of cyt c on the SAM of MES is pH-independent at 100 +/- 15 s(-1). Those facts suggest that a large negative charge density on the SAM surface slows down the ET between cyt c and the electrode. The surface charge density of the SAM affects also the amount of electroactive cyt c, Gamma(e), which decreases from 10.0 +/- 1.0 to 5.3 +/- 1.1 pmol cm(-2) with increasing pH from 7 to 9 on the SAM of MPA. Similarly, the k(et) of cyt c adsorbed on the mixed SAMs of MES/MEL sharply decreases from 900 +/- 300 s(-1) to 110 s(-1) as the surface mole fraction of MES increases beyond 0.5, suggesting the presence of a negative surface charge threshold beyond which the rate of ET of cyt c is dramatically lowered. The decrease in the k(et) on the SAMs at high negative charge densities probably results from the confinement of adsorbed cyt c by the strong electrostatic force to an orientation that is not optimal for the ET reaction.

Redox and redox-coupled processes of heme proteins and enzymes at electrochemical interfaces

Modern bioelectrochemical methods rely upon the immobilisation of redox proteins and enzymes on electrodes coated with biocompatible materials to prevent denaturation. However, even when protein denaturation is effectively avoided, heterogeneous protein electron transfer is often coupled to non-Faradaic processes like reorientation, conformational transitions or acid-base equilibria. Disentangling these processes requires methods capable of probing simultaneously the structure and reaction dynamics of the adsorbed species. Here we provide an overview of the recent developments in Raman and infrared surface-enhanced spectroelectrochemical techniques applied to the study of soluble and membrane bound redox heme proteins and enzymes. Possible biological implications of the findings are critically discussed.

In situ STM imaging and direct electrochemistry of Pyrococcus furiosus ferredoxin assembled on thiolate-modified Au111 surfaces

We have addressed here electron transfer (ET) of Pyrococcus furiosus ferredoxin (PfFd, 7.5 kDa) in both homogeneous solution using edge plane graphite (EPG) electrodes and in the adsorbed state by electrochemistry on surface-modified single-crystal Au111 electrodes, This has been supported by surface microscopic structures of PfFd monolayers, as revealed by scanning tunneling microscopy under potential control (in situ STM). Direct ET between PfFd in phosphate buffer solution, pH 7.9, and EPG electrodes is observed in the presence of promoters. Neomycin gives rise to a pair of redox peaks with a formal potential of ca -430 mV (vs SCE), corresponding to [3Fe-4S]1+/0. The presence of an additional promoter, which can be propionic acid, alanine, or cysteine, induces a second pair of redox peaks at approximately -900 mV (vs SCE) arising from [3Fe-4S]0/1-. A robust neomycin-PfFd complex was detected by mass spectrometry. The results clearly favor an ET mechanism in which the promoting effect of small organic molecules is through formation of promoter-protein complexes. The interaction of PfFd with small organic molecules in homogeneous solution offers clues to confine the protein on the electrode surface modified by the same functional group monolayer and to address diffusionless direct electrochemistry, as well as surface microstructures of the protein monolayer. PfFd molecules were found to assemble on either mercaptopropionic acid (MPA) or cysteine-modified Au111 surfaces in stable monolayers or submonolayers. Highly ordered (2 radical 3 x 5)R30 degrees cluster structures with six MPA molecules in each cluster were found by in situ STM. Individual PfFd molecules on the MPA layer are well resolved by in situ STM. Under Ar protection reversible cyclic voltammograms were obtained on PfFd-MPA/Au111 and PfFd-cysteine/Au111 electrodes with redox potentials of -220 and -201 mV (vs SCE), respectively, corresponding to the [Fe3S4]1+/0 couple. These values are shifted positively by 200 mV relative to homogeneous solution due to interactions between the promoting layers and the protein molecules. Possible mechanisms for such interactions and their ET patterns are discussed.

Electron-transfer processes of cytochrome C at interfaces. New insights by surface-enhanced resonance Raman spectroscopy

The heme protein cytochrome c acts as an electron carrier at the mitochondrial-membrane interface and thus exerts its function under the influence of strong electric fields. To assess possible consequences of electric fields on the redox processes of cytochrome c, the protein can be immobilized to self-assembled monolayers on electrodes and studied by surface-enhanced resonance Raman spectroscopy. Such model systems may mimic some essential features of biological interfaces including local electric field strengths. It is shown that physiologically relevant electric field strengths can effectively modulate the electron-transfer dynamics and induce conformational transitions.

Direct monitoring of the electron pool effect of cytochrome c3 by highly sensitive EQCM measurements

Cytochrome c(3) from Desulfovibrio vulgaris has four hemes per molecule, and a redox change at the hemes alters the conformation of the protein, leading to a redox-dependent change in the interaction of cytochrome c(3) with redox partners (an electron acceptor or an electron donor). The redox-dependent change in this interaction was directly monitored by the high-performance electrochemical quartz crystal microbalance (EQCM) technique that has been improved to give high sensitivity in solution. In this method, cytochrome c(3) molecules in solution associate electrostatically with a viologen-immobilized quartz crystal electrode as a monolayer, and redox of the associating cytochrome c(3) is controlled by the immobilized viologen. This technique makes it possible to measure the access of cytochrome c(3) to the electrode or repulsion from the electrode, and hence interconversion between an electrostatic complex and an electron transfer complex on the cytochrome c(3) and the viologen as a mass change accompanying a potential sweep is monitored. In addition, simultaneous measurement of a mass change and a potential step reveals that the cytochrome c(3) stores electrons when the four hemes are reduced (an electron pool effect), that is, the oxidized cytochrome c(3) facilitates acceptance of electrons from the immobilized viologen molecule, but the reduced cytochrome c(3) donates the accepted electrons to the viologen with difficulty.

Mimicking Protein−Protein Electron Transfer: Voltammetry of Pseudomonas aeruginosa Azurin and the Thermus thermophilus CuA Domain at ω-Derivatized Self-Assembled-Monolayer Gold Electrodes

Well-defined voltammetric responses of redox proteins with acidic-to-neutral pI values have been obtained on pure alkanethiol as well as on mixed self-assembled-monolayer (SAM) omega-derivatized alkanethiol/gold bead electrodes. Both azurin (P. aeruginosa) (pI = 5.6) and subunit II (Cu(A) domain) of ba(3)-type cytochrome c oxidase (T. thermophilus) (pI = 6.0) exhibit optimal voltammetric responses on 1:1 mixtures of [H(3)C(CH(2))(n)()SH + HO(CH(2))(n)()SH] SAMs. The electron transfer (ET) rate vs distance behavior of azurin and Cu(A) is independent of the omega-derivatized alkanethiol SAM headgroups. Strikingly, only wild-type azurin and mutants containing Trp48 give voltammetric responses: based on modeling, we suggest that electronic coupling with the SAM headgroup (H(3)C- and/or HO-) occurs at the Asn47 side chain carbonyl oxygen and that an Asn47-Cys112 hydrogen bond promotes intramolecular ET to the copper. Inspection of models also indicates that the Cu(A) domain of ba(3)-type cytochrome c oxidase is coupled to the SAM headgroup (H(3)C- and/or HO-) near the main chain carbonyl oxygen of Cys153 and that Phe88 (analogous to Trp143 in subunit II of cytochrome c oxidase from R. sphaeroides) is not involved in the dominant tunneling pathway. Our work suggests that hydrogen bonds from hydroxyl or other proton-donor groups to carbonyl oxygens potentially can facilitate intermolecular ET between physiological redox partners.

Functional Vibrational Spectroscopy of a CytochromecMonolayer: SEIDAS Probes the Interaction with Different Surface-Modified Electrodes

Electrochemically induced infrared difference spectra of cytochrome c on various chemically modified electrodes (CMEs) are recorded by exploiting the surface-enhancement exerted by a granular gold film. We have recently developed surface-enhanced infrared difference absorption spectroscopy (SEIDAS), which provides acute sensitivity to observe the minute enzymatic change of a protein on the level of a monolayer. By these means, we demonstrate that the relative band intensities in the potential-induced difference spectra of adsorbed cytochrome c are significantly dependent on the type of CME used (mercaptopropionic acid, mercaptoethanol, 4,4'-dithiodipyridine, or L-cysteine). These differences are attributed to the altered interaction of cytochrome c with the headgroup of the various CMEs leading to variations in surface orientation and relative distance from the surface. Nevertheless, the peak positions of the observed bands are identical among the CMEs employed. This implies that the internal conformational changes induced by the redox reaction of the adsorbed cytochrome c are not disturbed by the interaction with the CME and that full functionality of the protein is retained. Finally, we critically discuss our results within the framework of the different models for cytochrome c adsorption on CMEs.

A Superoxide Sensor Based on a Multilayer Cytochrome c Electrode

A novel multilayer cytochrome c electrode for the quantification of superoxide radical concentrations is introduced. The electrode consists of alternating layers of cytochrome c and poly(aniline(sulfonic acid)) on a gold wire electrode. The formation of multilayer structures was proven by SPR experiments. Assemblies with 2-15 protein layers showed electrochemical communication with the gold electrode. For every additional layer, a substantial increase in electrochemically active cytochrome c (cyt. c) was found. For electrodes of more than 10 layers, the increase was more than 1 order of magnitude as compared to monolayer electrode systems. Thermodynamic and kinetic parameters of the electrodes were characterized. The mechanism of electron transfer within the multilayer assembly was studied, with results suggesting a protein-protein electron-transfer model. Electrodes of 2-15 layers were applied to the in vitro quantification of enzymatically generated superoxide, showing superior sensitivity as compared to a monolayer-based sensor. An electrode with 6 cyt. c/PASA layers showed the highest sensitivity of the systems studied, giving an increase in sensitivity of half an order of magnitude versus the that of the monolayer electrode. The stability of the system was optimized using thermal treatment, resulting in no loss in sensor signal or protein loading after 10 successive measurements or 2 days of storage.