Porous substrates for label-free molecular level detection of nonresonant organic molecules

Paper-based SERS swab for rapid trace detection on real-world surfaces

One of the important but often overlooked considerations in the design of surface-enhanced Raman scattering (SERS) substrates for trace detection is the efficiency of sample collection. Conventional designs based on rigid substrates such as silicon, alumina, and glass resist conformal contact with the surface under investigation, making the sample collection inefficient. We demonstrate a novel SERS substrate based on common filter paper adsorbed with gold nanorods, which allows conformal contact with real-world surfaces, thus dramatically enhancing the sample collection efficiency compared to conventional rigid substrates. We demonstrate the detection of trace amounts of analyte (140 pg spread over 4 cm2) by simply swabbing the surface under investigation with the novel SERS substrate. The hierarchical fibrous structure of paper serves as a 3D vasculature for easy uptake and transport of the analytes to the electromagnetic hot spots in the paper. Simple yet highly efficient and cost-effective SERS substrate demonstrated here brings SERS-based trace detection closer to real-world applications.

In situ growth of silver nanoparticles in porous membranes for surface-enhanced raman scattering

We demonstrate the in situ growth of silver nanoparticles in porous alumina membranes (PAMs) for use as a surface-enhanced Raman scattering (SERS) detection substrate. This fabrication method is simple, cost-effective, and fast, while providing control over the size of silver nanoparticles through the entire length of the cylindrical nanopores with uniform particle density inside the pores unachievable by the traditional infiltration technique. The in situ growth of silver nanoparticles was conducted from electroless-deposited nanoscale seeds on the interior of the PAM and resulted in the formation of numerous hot spots, which facilitated significantly higher SERS enhancement for these substrates compared with previously reported porous substrates.

Enhanced Single-Molecule Detection using Porous Silver Membrane

We evaluated a commercial porous silver membrane as a support substrate for direct localization and visualization of single molecule events. We characterized the fluorescence behaviors of fluorescently labeled DNA oligonucleotides on the silver membranes. The fluorescence from the fluorescent probes that were immobilized on the porous silver is greatly enhanced. Additionally, correlated to reflectance contour image, it appears that enhanced fluorescence came from location close to the "valley" of the pore channels (or in the voids). These results are of great interest to increase the effectiveness of fluorescence-based single molecule DNA analysis.

Large-scale synthesis of flexible free-standing SERS substrates with high sensitivity: electrospun PVA nanofibers embedded with controlled alignment of silver nanoparticles

A new and facile way to synthesize a free-standing and flexible surface-enhanced Raman scattering (SERS) substrate has been successfully developed, where high SERS-active Ag dimers or aligned aggregates are assembled within poly(vinyl alcohol) (PVA) nanofibers with chain-like arrays via electrospinning technique. The aggregation state of the obtained Ag nanoparticle dimers or larger, which are formed in a concentrated PVA solution, makes a significant contribution to the high sensitivity of SERS to 4-mercaptobenzoic acid (4-MBA) molecules with an enhancement factor (EF) of 10(9). The superiority of enhancement ability of this Ag/PVA nanofiber mat is also shown in the comparison to other substrates. Furthermore, the Ag/PVA nanofiber mat would keep a good reproducibility under a low concentration of 4-MBA molecule (10(-6) M) detection with the average RSD values of the major Raman peak less than 0.07. The temporal stability of the substrate has also been demonstrated. This disposable, easy handled, flexible free-standing substrate integrated the advantages including the superiority of high sensitivity, reproducibility, stability, large-scale, and low-cost production compared with other conventional SERS substrates, implying that it is a perfect choice for practical SERS detection application.

Bimetallic nanostructures as active Raman markers: gold-nanoparticle assembly on 1D and 2D silver nanostructure surfaces

It is demonstrated that bimetallic silver-gold anisotropic nanostructures can be easily assembled from various nanoparticle building blocks with well-defined geometries by means of electrostatic interactions. One-dimensional (1D) silver nanowires, two-dimensional (2D) silver nanoplates, and spherical gold nanoparticles are used as representative building blocks for bottom-up assembly. The gold nanoparticles are electrostatically bound onto the 1D silver nanowires and the 2D silver nanoplates to give bimetallic nanostructures. The unique feature of the resulting nanostructures is the particle-to-particle interaction that subjects absorbed analytes to an enhanced electromagnetic field with strong polarization dependence. The Raman activity of the bimetallic nanostructures is compared with that of the individual nanoparticle blocks by using rhodamine 6G solution as the model analyte. The Raman intensity of the best-performing silver-gold nanostructure is comparable with the dense array of silver nanowires and silver nanoplates that were prepared by means of the Langmuir-Blodgett technique. An optimized design of a single-nanostructure substrate for surface-enhanced Raman spectroscopy (SERS), based on a wet-assembly technique proposed here, can serve as a compact and low-cost alternative to fabricated nanoparticle arrays.

Entropy driven spontaneous formation of highly porous films from polymer-nanoparticle composites

Nanoporous materials have become indispensable in many fields ranging from photonics, catalysis and semiconductor processing to biosensor infrastructure. Rapid and energy efficient process fabrication of these materials is, however, nontrivial. In this communication, we describe a simple method for the rapid fabrication of these materials from colloidal dispersions of Polymethyl Silsesquioxane nanoparticles. Nanoparticle-polymer composites above the decomposition temperature of the polymer are examined and the entropic gain experienced by the nanoparticles in this rubric is harnessed to fabricate novel highly porous films composed of nanoparticles. Optically smooth, hydrophobic films with low refractive indices (as low as 1.048) and high surface areas (as high as 1325 m(2) g(-1)) have been achieved with this approach. In this communication we address the behavior of such systems that are both temperature and substrate surface energy dependent. The method is applicable, in principle, to a variety of nanoparticle-polymer systems to fabricate custom nanoporous materials.

Current trends in the detection of peroxide-based explosives

The increased use of peroxide-based explosives (PBEs) in criminal and terrorist activity has created a demand for continued innovation in the detection of these agents. This review provides an update to a previous 2006 review on the detection of PBEs, with a focus in this report on luminescence and fluorescence methods, infrared and Raman spectroscopy, mass spectrometry, and electrochemical techniques. Newer developments in gas chromatography and high performance liquid chromatography methods are also discussed. One recent trend that is discussed is an emphasis on field measurements through the use of portable instruments or portable assay formats. An increase in the use of infrared spectroscopy and mass spectrometry for PBE analysis is also noted. The analysis of triacetone triperoxide has been the focus in the development of many of these methods, although hexamethylene triperoxide diamine has received increased attention in PBE detection during the last few years.

Formation and optical properties of compression-induced nanoscale buckles on silver nanowires

An intriguing formation of nanoscale buckles is discovered when an array of aligned silver nanowires was deposited onto prestrained polydimethylsiloxane substrates. The spacing distance between the resulting silver nanoparticles corresponds to the buckling wavelength of the silver nanowires. The buckled nanowires exhibit unique optical properties, such as interruption of scattered polarized photons and emission of photons from subwavelength structure, as well as surface-enhanced Raman scattering at the vicinity of the formed nanobuckles. In this way, they have great potentials for nano-opto devices, catalysts for chemical reactions, and functional materials for chemical detections.