Assembly of VP26 in herpes simplex virus-1 inferred from structures of wild-type and recombinant capsids

Structure of double-shelled rice dwarf virus

Rice dwarf virus (RDV), a member of the Reoviridae family, is a double-stranded RNA virus. Infection of rice plants with RDV reduces crop production significantly and can pose a major economic threat to Southeast Asia. A 25-A three-dimensional structure of the 700-A-diameter RDV capsid has been determined by 400-kV electron cryomicroscopy and computer reconstruction. The structure revealed two distinctive icosahedral shells: a T=13l outer icosahedral shell composed of 260 trimeric clusters of P8 (46 kDa) and an inner T=1 icosahedral shell of 60 dimers of P3 (114 kDa). Sequence and structural comparisons were made between the RDV outer shell trimer and the two crystal conformations (REF and HEX) of the VP7 trimer of bluetongue virus, an animal analog of RDV. The low-resolution structural match of the RDV outer shell trimer to the HEX conformation of VP7 trimer has led to the proposal that P8 consists of an upper domain of beta-sandwich motif and a lower domain of alpha helices. The less well fit REF conformation of VP7 to the RDV trimer may be due to the differences between VP7 and P8 in the sequence of the hinge region that connects the two domains. The additional mass density and the absence of a known signaling peptide on the surface of the RDV outer shell trimer may be responsible for the different interactions between plants and animal reoviruses.

Incorporation of the green fluorescent protein into the herpes simplex virus type 1 capsid

The herpes simplex virus type 1 (HSV-1) UL35 open reading frame (ORF) encodes a 12-kDa capsid protein designated VP26. VP26 is located on the outer surface of the capsid specifically on the tips of the hexons that constitute the capsid shell. The bioluminescent jellyfish (Aequorea victoria) green fluorescent protein (GFP) was fused in frame with the UL35 ORF to generate a VP26-GFP fusion protein. This fusion protein was fluorescent and localized to distinct regions within the nuclei of transfected cells following infection with wild-type virus. The VP26-GFP marker was introduced into the HSV-1 (KOS) genome resulting in recombinant plaques that were fluorescent. A virus, designated K26GFP, was isolated and purified and was shown to grow as well as the wild-type virus in cell culture. An analysis of the intranuclear capsids formed in K26GFP-infected cells revealed that the fusion protein was incorporated into A, B, and C capsids. Furthermore, the fusion protein incorporated into the virion particle was fluorescent as judged by fluorescence-activated cell sorter (FACS) analysis of infected cells in the absence of de novo protein synthesis. Cells infected with K26GFP exhibited a punctate nuclear fluorescence at early times in the replication cycle. At later times during infection a generalized cytoplasmic and nuclear fluorescence, including fluorescence at the cell membranes, was observed, confirming visually that the fusion protein was incorporated into intranuclear capsids and mature virions.

Herpes simplex virus type 1 VP26 is not essential for replication in cell culture but influences production of infectious virus in the nervous system of infected mice

VP26 is the smallest capsid protein of herpes simplex virus type 1 and is encoded by the UL35 open reading frame. It resides on the outer capsid surface, interacting with VP5 in a one to one stoichiometry in the hexons that comprise capsids. A null mutation in the gene encoding VP26 was generated and transferred into the KOS genome. Recombinant viruses were isolated on Vero cells, which indicated that the absence of VP26 was not required for growth of the virus in cell culture. This was confirmed by the characterization of the VP26 null mutant, designated K delta 26Z. The yield of virus from K delta 26Z-infected Vero cells was decreased only twofold relative to wild-type-infected cells, as judged by the burst size. All three types of capsids (A, B, and C) were observed after sedimentation analysis of K delta 26Z-infected cell extracts. These capsids were similar in composition to wild-type capsids except for the absence of VP26. The mouse ocular model was used to determine if VP26 played a major role in vivo. The yield of the mutant virus relative to wild-type virus was decreased twofold in the eye; however, the mutant virus yields were decreased 30- to 100-fold in the trigeminal ganglia. Reactivation of the mutant virus as determined by cocultivation assays was also reduced. To determine the effect of VP26 on capsid translocation, the VP26 null mutation was transferred into a virus specifiying a thymidine kinase mutation that by itself is transported to the trigeminal ganglia but whose DNA is not replicated in the ganglia. Using quantitative PCR assays the number of viral genomes detected in the ganglia was similar in the presence or the absence of VP26. Therefore, VP26 does not appear to aid in the translocation of the virus capsid from the mouse eye to the trigeminal ganglia but is important for infectious virus production in the ganglia.

HSV molecular biology: general aspects of herpes simplex virus molecular biology

Comparison of the herpes simplex virus type 1 (HSV-1) DNA sequence with that of other alpha, beta and gamma-herpesviruses, allied with molecular genetic studies have greatly increased understanding of the HSV genome and the functions encoded by individual virus genes and has facilitated the development of rational antiviral strategies. Here we review the coding content of the HSV-1 genome and identify: genes encoding structural components of the capsid, tegument or envelope; genes whose products are essential for growth in tissue culture; and genes that are conserved between members of the alpha, beta and gamma-herpesvirinae. The HSV lifecycle and the main regulation cascade is discussed and genes that present targets for antiviral intervention identified. The protein content of the infectious virion particle is reviewed and compared with that of two additional non-infectious HSV-related particles species (L-particles and pre-DNA replication particles (PREPs)). The potential of HSV-1 L particles and PREP particles as DNA-free HSV-1 vaccine candidates and the desirability of deleting specific gene products from live HSV vaccines is discussed.

Assembly of the herpes simplex virus capsid: preformed triplexes bind to the nascent capsid

The herpes simplex virus type 1 (HSV-1) capsid is a T=16 icosahedral shell that forms in the nuclei of infected cells. Capsid assembly also occurs in vitro in reaction mixtures created from insect cell extracts containing recombinant baculovirus-expressed HSV-1 capsid proteins. During capsid formation, the major capsid protein, VP5, and the scaffolding protein, pre-VP22a, condense to form structures that are extended into procapsids by addition of the triplex proteins, VP19C and VP23. We investigated whether triplex proteins bind to the major capsid-scaffold protein complexes as separate polypeptides or as preformed triplexes. Assembly products from reactions lacking one triplex protein were immunoprecipitated and examined for the presence of the other. The results showed that neither triplex protein bound unless both were present, suggesting that interaction between VP19C and VP23 is required before either protein can participate in the assembly process. Sucrose density gradient analysis was employed to determine the sedimentation coefficients of VP19C, VP23, and VP19C-VP23 complexes. The results showed that the two proteins formed a complex with a sedimentation coefficient of 7.2S, a value that is consistent with formation of a VP19C-VP23(2) heterotrimer. Furthermore, VP23 was observed to have a sedimentation coefficient of 4.9S, suggesting that this protein exists as a dimer in solution. Deletion analysis of VP19C revealed two domains that may be required for attachment of the triplex to major capsid-scaffold protein complexes; none of the deletions disrupted interaction of VP19C with VP23. We propose that preformed triplexes (VP19C-VP23(2) heterotrimers) interact with major capsid-scaffold protein complexes during assembly of the HSV-1 capsid.

Identification of the sites of interaction between the scaffold and outer shell in herpes simplex virus-1 capsids by difference electron imaging

Formation of herpes simplex virus-1 capsids requires the presence of intact scaffolding proteins. The C terminus of the abundant scaffolding protein associates with the major capsid shell protein VP5 through hydrophobic interactions. After cleavage by the viral encoded protease, which removes their C-terminal 25 aa, the scaffolding proteins are released from the capsid. We have used electron cryomicroscopy and computer image processing to determine, to 13 A, the three-dimensional structures of capsids containing either cleaved or uncleaved scaffolding proteins. Detailed comparisons show that the structures of the outer icosahedral shells are almost identical in the two capsid types. Differences are apparent in the radial distribution of the density inside the capsid shell (within a radius of 460 ) which represents the scaffolding core. However, in both capsid types, the bulk of this internal density exhibits no icosahedral symmetry. Close examination revealed localized regions of icosahedrally arranged extra density at the interface between the outer shell and the scaffold of protease-minus capsids. Rod-like densities extending inwards for approximately 40 from the capsid shell are present under four of the six quasi-equivalent triplex positions. Under triplexes Tb, Tc, and Te, the major additional densities appear as pairs with the rods in each pair situated 37 apart. We propose that these rods are formed by the C-termini of the scaffolding proteins and represent the sites of interaction between the capsid shell and scaffold.

Capsids are formed in a mutant virus blocked at the maturation site of the UL26 and UL26.5 open reading frames of herpes simplex virus type 1 but are not formed in a null mutant of UL38 (VP19C)

Previously we reported that null mutant viruses of UL19 (VP5) or of UL18 (VP23), essential components of herpes simplex virus type 1 (HSV-1) capsid shells, do not form precursor capsid structures as judged by sedimentation and electron microscope analysis. A goal of the present experiments was to isolate a null mutant virus for the remaining essential component of capsid shells, VP19C, encoded by the UL38 open reading frame (ORF). Furthermore, we wished to determine if a virus altered in the UL26 maturation cleavage site at residues 610 and 611 produced a lethal phenotype. Therefore, we decided to isolate cell lines that encode and express multiple capsid genes. Several cell lines were isolated by transformation of Vero cells and one designated C32 expressed all of the essential capsid proteins. Using this cell line we isolated a null mutant virus in the UL38 ORF and a mutant virus that was altered at residues 610 and 611 of the UL26 and UL26.5 gene products. We found that the null mutant in VP19C did not form a detectable product as judged by sedimentation and electron microscope analyses following infection of nonpermissive cells. The mutant virus altered at the UL26 maturation site resulted in the accumulation of B capsids. Therefore, cleavage at this site was essential for the maturation of B capsids into C capsids. Interestingly, the absence of cleavage at the maturation site was required for the retention of VP24 in the capsid.

Refinement of herpesvirus B-capsid structure on parallel supercomputers

Electron cryomicroscopy and icosahedral reconstruction are used to obtain the three-dimensional structure of the 1250-A-diameter herpesvirus B-capsid. The centers and orientations of particles in focal pairs of 400-kV, spot-scan micrographs are determined and iteratively refined by common-lines-based local and global refinement procedures. We describe the rationale behind choosing shared-memory multiprocessor computers for executing the global refinement, which is the most computationally intensive step in the reconstruction procedure. This refinement has been implemented on three different shared-memory supercomputers. The speedup and efficiency are evaluated by using test data sets with different numbers of particles and processors. Using this parallel refinement program, we refine the herpesvirus B-capsid from 355-particle images to 13-A resolution. The map shows new structural features and interactions of the protein subunits in the three distinct morphological units: penton, hexon, and triplex of this T = 16 icosahedral particle.

Hexon-only binding of VP26 reflects differences between the hexon and penton conformations of VP5, the major capsid protein of herpes simplex virus

VP26 is a 12-kDa capsid protein of herpes simplex virus 1. Although VP26 is dispensable for assembly, the native capsid (a T=16 icosahedron) contains 900 copies: six on each of the 150 hexons of VP5 (149 kDa) but none on the 12 VP5 pentons at its vertices. We have investigated this interaction by expressing VP26 in Escherichia coli and studying the properties of the purified protein in solution and its binding to capsids. Circular dichroism spectroscopy reveals that the conformation of purified VP26 consists mainly of beta-sheets (approximately 80%), with a small alpha-helical component (approximately 15%). Its state of association was determined by analytical ultracentrifugation to be a reversible monomer-dimer equilibrium, with a dissociation constant of approximately 2 x 10(-5) M. Bacterially expressed VP26 binds to capsids in the normal amount, as determined by quantitative sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Cryoelectron microscopy shows that the protein occupies its usual sites on hexons but does not bind to pentons, even when available in 100-fold molar excess. Quasi-equivalence requires that penton VP5 must differ in conformation from hexon VP5: our data show that in mature capsids, this difference is sufficiently pronounced to abrogate its ability to bind VP26.

Improved common line-based icosahedral particle image orientation estimation algorithms

Modifications are described for the center and angular parameter estimation algorithms of common line-based particle image orientation determination which is an essential step in the three-dimensional reconstruction of icosahedral virus particles. The modifications incorporate a variety of image processing, pattern recognition, and statistical tools resulting in objective and automated orientation estimation algorithms. The modified algorithms were tested using electron cryo-microscopic particle images of three different virus specimens, with sizes 400-1250 A in diameter, covering a broad range of defocus values. Evaluation of these modified algorithms shows significant improvement over the previous algorithms. The center and angular parameters were estimated with higher accuracy allowing the identification of a larger number of particle orientations. Usage of the modified estimation algorithms resulted in the identification of particle orientations which could not to be identified using the algorithms before modification. Furthermore, these improvements have resulted in the determination of a better quality and a higher resolution three-dimensional reconstruction. The improved algorithms have been developed into a software package which can be obtained via the world wide web at http://ncmi.bioch.bcm.tmc.edu/pthuman.

Capsid assembly and DNA packaging in herpes simplex virus

The genome of HSV-1 contains 80-85 open reading frames. Genetic and biochemical evidence suggests that at least 39 of these genes encode proteins that are components of the HSV-1 virion. The architecture of the HSV-1 virion consists of a trilaminar lipid envelope, an amorphous layer known as the tegument, a capsid shell, and a DNA-containing core. The capsid is an icosahedral shell whose major morphological features are 162 capsomers. It is composed of a major capsid protein called VP5 and three less abundant proteins, VP19C, VP23 and VP26. VP5 is the structural subunit of all 162 capsomers while VP19C and VP23 are located in the space between the capsomers. In addition to the structural proteins, capsid assembly involves participation of the HSV-1-encoded protease and the scaffolding protein, preVP22a. DNA packaging involves participation of DNA, empty capsids, and at least seven additional HSV-1-encoded proteins. Considerable advances have been made in understanding the structure of the capsid shell, largely as the result of applying cryoelectron microscopy techniques. Use of recombinant baculoviruses has allowed for a detailed analysis of the proteins required for capsid assembly. More recently, an in vitro system has been developed which has aided in defining the assembly pathway by identifying intermediates in the assembly of intact capsids. The in vitro system has identified a fragile roundish procapsid which matures into the polyhedral capsid in a transition similar to that undergone by bacteriophage proheads. This review is a summary of our present knowledge with respect to the structure and assembly of the HSV-1 capsid and what is known about the seven genes involved in DNA packaging. Copyright 1997 John Wiley & Sons Ltd.

Novel structural features of bovine papillomavirus capsid revealed by a three-dimensional reconstruction to 9 A resolution

The three-dimensional structure of bovine papillomavirus has been determined to 9 A resolution by reconstruction of high resolution, low dose cryo-electron micrographs of quench-frozen virions. Although hexavalent and pentavalent capsomeres form star-shaped pentamers of the major capsid protein L1, they have distinct high-resolution structures. Most prominently, a 25 A hole in the centre of hexavalent capsomeres is occluded in the pentavalent capsomeres. This raises the possibility that the L2 minor capsid protein is located in the centre of the pentavalent capsomeres. Inter-capsomere connections approximately 10 A in diameter were clearly resolved. These link adjacent capsomeres and are reminiscent of the helical connections that stabilize polyomavirus.

Structure of the herpes simplex virus capsid: peptide A862-H880 of the major capsid protein is displayed on the rim of the capsomer protrusions

The herpes simplex virus-1 (HSV-1) capsid shell has 162 capsomers arranged on a T = 16 icosahedral lattice. The major capsid protein, VP5 MW = 149,075) is the structural component of the capsomers. VP5 is an unusually large viral capsid protein and has been shown to consist of multiple domains. To study the conformation of VP5 as it is folded into capsid promoters, we identified the sequence recognized by a VP5-specific monoclonal antibody and localized the epitope on the capsid surface by cryoelectron microscopy and image reconstruction. The epitope of mAb 6F10 was mapped to residues 862-880 by immunoblotting experiments performed with (1) proteolytic fragments of VP5, (2) GST-fusion proteins containing VP5 domains, and (3) synthetic VP5 peptides. As visualized in a three-dimensional density map of 6F10-precipitated capsids, the antibody was found to bind at sites on the outer surface of the capsid just inside the openings of the trans-capsomeric channels. We conclude that these sites are occupied by peptide 862-880 in the mature HSV-1 capsid.

Cytomegalovirus "missing" capsid protein identified as heat-aggregable product of human cytomegalovirus UL46

Capsids of human and simian strains of cytomegalovirus (HCMV and SCMV, respectively) have identified counterparts for all but one of the protein components of herpes simplex virus (HSV) capsids. The open reading frames (ORFs) for the CMV and HSV counterpart proteins are positionally homologous in the two genomes. The HSV capsid protein without a recognized counterpart in CMV is VP19c, a 50-kDa element of the intercapsomeric "triplex." VP19c is encoded by HSV ORF UL38, whose positional homolog in the HCMV genome is UL46. The predicted protein product of HCMV UL4A6, however, has essentially no amino acid sequence similarity to HSV VP19c, is only two-thirds as long, and was not recognized as a component of CMV capsids. To identify and learn more about the protein encoded by HCMV UL46, we have expressed it in insect cells from a recombinant baculovirus and tested for its presence in CMV-infected human cells and virus particles with two UL4A6-specific antipeptide antisera. Results presented here show that this HCMV protein (i) has a size of approximately 30 kDa as expressed in both recombinant baculovirus-infected insect cells and HCMV-infected human cells; (ii) has a homolog in SCMV; (iii) is a capsid component and is present in a 1:2 molar ratio with the minor capsid protein (mCP), encoded by UL85; and (iv) interacts with the mCP, which is also shown to interact with itself as demonstrated by the GAL4 two-hybrid system; and (v) aggregates when heated and does not enter the resolving gel during sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE), a characteristic that accounts for it eluding detection until now. We call this protein the mCP-binding protein, and on the basis of the characteristics that it shares with HSV VP19c, we conclude that the HCMV mCP-binding protein is the functional as well as genetic homolog of HSV VP19c.

The herpes simplex virus procapsid: structure, conformational changes upon maturation, and roles of the triplex proteins VP19c and VP23 in assembly

The proteins coded by the five major capsid genes of herpes simplex virus 1, VP5 (gene UL19), VP19c (UL38), VP23 (UL18), pre-VP22a (UL26.5), and pre-VP21 (UL26), assemble into fragile roundish "procapsids", which mature into robust polyhedral capsids in a transition similar to that undergone by bacteriophage proheads. Here we describe the HSV-1 procapsid structure to a resolution of approximately 2.7 nm from three-dimensional reconstructions of cryo-electron micrographs. Comparison with the mature capsid provides insight into the large-scale conformational changes that take place upon maturation. In the procapsid, the elongated protomers (VP5 subunits) make little contact with each other except around the bases of the hexons and pentons, whereas they are tightly clustered into capsomers in the mature state; the axial channels, which are constricted or blocked in the mature capsid, are fully open; and unlike the well observed 6-fold symmetry of mature hexons, procapsid hexons are distorted into oval and triangular shapes. These deformations reveal a VP5 domain in the inner part of the protrusion wall which participates in inter-protomer bonding in the procapsid and is close to the site where the channel closes upon maturation. Remarkably, there are no direct contacts between neighboring capsomers; instead, interactions between them are mediated by the "triplexes" at the sites of local 3-fold symmetry. This observation discloses the mechanism whereby the triplex proteins, VP19c and VP23, play their essential roles in capsid morphogenesis. In the mature capsid, density extends continuously between neighboring capsomers in the inner "floor" layer. In contrast, there are large gaps in the corresponding region of the procapsid, implying that formation of the floor involves extensive remodeling. Inside the procapsid shell is the hollow spherical scaffold, whose radial density profile indicates that the major scaffold protein, pre-VP22a, is a long molecule (> 24 nm) composed of three domains. Since no evidence of icosahedral symmetry is detected in the scaffold, we infer that (unless higher resolution is required) the scaffold may not be an icosahedral shell but may instead be a protein micelle with a preferred radius of curvature.

Human cytomegalovirus (HCMV) smallest capsid protein identified as product of short open reading frame located between HCMV UL48 and UL49

The capsid of cytomegalovirus contains an abundant, low-molecular-weight protein whose coding sequence within the viral genome had not been identified. We have used a combination of biochemical and immunological techniques to demonstrate that this protein, called the smallest capsid protein in human cytomegalovirus, is encoded by a previously unidentified 225-bp open reading frame (ORF) located between ORFs UL48 and UL49. This short ORF, called UL48/49, is the positional homolog of herpes simplex virus ORF UL35 (encoding capsid protein VP26) and shows partial amino acid sequence identity to positional homologs in human herpes viruses 6 and 7.