Direct Determination of Redox Statuses in Biological Thiols and Disulfides with Noncovalent Interactions of Poly(ionic liquid)s

The three most important redox couples, including cysteine (Cys)/cystine (Cyss), homocysteine (Hcys)/homocystine (Hcyss), and reduced glutathione (GSH)/glutathione disulfide (GSSG), are closely associated with human aging and many diseases. Thus, it is highly important to determine their redox statuses at the following two levels: (i) the redox identity in different thiols/disulfides and (ii) the redox ratio in a mixture of a specific couple. Herein, by using one single AIE-doped (AIE, aggregation-induced emission) photonic-structured poly(ionic liquid) (PIL) sphere as a virtual sensor array, we realize a direct determination of the redox status without a reducing pretreatment of disulfides, which will greatly promote the development of high-throughput and simple procedures. The pattern-recognition method uses the multiple noncovalent interactions of imidazolium-based PILs with these redox species to produce differential responses in both the photonic crystal and fluorescence dual channels. On the one hand, a single sphere enables the direct and simultaneous discrimination of the redox identities of Cys, Cyss, Hcys, Hcyss, GSH, and GSSG under the interference of other five commonly occurring thiols. On the other hand, this sphere also allows for not only a direct quantification of the GSH/GSSG ratios without previously determining the individual concentrations of GSH and GSSG but also the accurate prediction of the ratios in unknown redox samples. To further demonstrate applications of this method, redox mixtures in a biological sample are differentiated. Additionally, quantum calculations further support our assignments for interactions between the imidazolium-based PILs and these redox species.

A nanoneedle-based reactional wettability variation sensor array for on-site detection of metal ions with a smartphone

An enhancement of the reactional wettability variation (RWV) sensing strategy is achieved based on the wettability switch of a nanoneedle surface. The sensor unit is formed by coating hydrophobic azoimidazole compounds, as the responder compounds onto the originally hydrophilic surface of cobalt hydroxide nanoneedles. The complexation reaction between metal ions and azoimidazole ligands etches the hydrophobic coating and switches the surface wettability, making the surface hydrophilic again. This switch is revealed by a decrease in the static contact angle (CA) and an increase in the sliding angle of the surface. The reactivity is tuned by the derivatization and conformational manipulation of the azoimidazole compounds. A sensor array composed of six as-tuned sensor units is constructed to distinguish among the species and concentrations of Fe³⁺, Ni²⁺ and La³⁺ at a low limit of 10^-6 M using the chemometric method of principal component analysis (PCA). In addition, a new on-site detection strategy is developed based on PCA of the sliding angle, which can be measured conveniently and swiftly with a smartphone app and a commercially available setup. The application of the general RWV strategy is envisioned to open new possibilities for on-site detection.

Urea-Functionalized Poly(ionic liquid) Photonic Spheres for Visual Identification of Explosives with a Smartphone

Current effort merging rational design of colorimetric sensor array with portable and easy-to-use hand-held readers delivers an effective and convenient method for on-site detection and discrimination of explosives. However, on the one hand, there are rare relevant reports; on the other hand, some limitations regarding direct sensing, color retention, and array extendibility still remain. Herein, urea-functionalized poly(ionic liquid) photonic spheres were employed to construct a brand-new colorimetric sensor array for directly identifying five nitroaromatic explosives with a smartphone. It is found that the strong hydrogen bonding between the urea motifs and the nitro groups offers the spheres high affinity for binding the targets, whereas the existence of other abundant intermolecular interactions in poly(ionic liquid) units renders one single sphere eligible for prominent cross-responses to a broad range of analytes. Besides, in our case, opal-like photonic crystal structures other than chemical dyes are used to fabricate a new style of colorimetric array. Such structural colors can be vivid and unchanged over a long period even in hazard environments. Importantly, through simply altering the preparation conditions of our PIL spheres, a pool of sensing elements could be added to the developed array for discrimination of extended target systems such as more explosives and even their mixtures in real-world context.

A Saccharide Chemosensor Array Developed Based on an Indicator Displacement Assay Using a Combination of Commercially Available Reagents

Herein, a very simple colorimetric chemosensor array is reported for saccharides (_D-glucose, _D-fructose, _D-xylose, _D-galactose, _D-mannose, _L-rhamnose, and N-acetyl-_D-gluosamine). While various types of chemosensors for saccharides have been investigated extensively to-this-date, tremendous additional efforts are still required on a regular basis for the syntheses of new chemosensors. Complicated syntheses would be a bottleneck, given that artificial receptor-based chemosensing systems are not so popular in comparison to biomaterial-based (e.g., enzyme-based) sensing systems. Toward this end, chemosensor array systems using molecular self-assembled materials can avoid the abovementioned synthetic efforts and achieve simultaneous qualitative and quantitative detection of a number of guest saccharides. Using a practical approach, we focus on an indicator displacement assay (IDA) to fabricate a chemosensor array for colorimetric saccharide sensing. On this basis, 3-nitrophenylboronic acid (3-NPBA) spontaneously reacts with catechol dyes such as alizarin red S (ARS), bromopyrogallol red (BPR), pyrogallol red (PR), and pyrocatechol violet (PV), and yields boronate ester derivatives with color changes. The addition of saccharides into the aqueous solution of the boronate esters induces color recovery owing to the higher binding affinity of 3-NPBA for saccharides, thus resulting in the release of dyes. By employing this system, we have succeeded in discriminating saccharides qualitatively and quantitatively with a classification success rate of 100%. Most importantly, our chemosensor array has been fabricated by only mixing low cost commercially available reagents in situ, which means that complicated synthetic processes are avoided for saccharide sensing. We believe this simple colorimetric assay that uses only commercially available reagents can create new, user-friendly supramolecular sensing pathways for saccharides.

A multichannel Au nanosensor for visual and pattern inspection of fatty acids

Fatty acids (FAs) are important dietary sources of fuel for animals and structural components for cells. The number, position and configuration of olefins in the alkyl chains play important roles in the impacts of FAs on human health. Currently, structural profiling of FAs in edible oils and fats is an important issue in nutrition industries and food safety. Due to the lack of distinct functional groups, it is extremely difficult to discriminate FAs with structural differences by facile and in situ sensing methods. A few chemosensors have been developed for shape selective sensing of FAs, but their capability and performance were still limited. Herein, for the first time, we proposed a multichannel Au nanosensor for visual and pattern-generating inspection of FAs based on the highly selective binding ability of Ag⁺ to olefinic bonds and Ag⁺ regulable color variation of Au nanoparticles. As a result, the nanosensor showed good selectivity for five FAs with subtle structural difference as low as 5 nM. By further deriving three channel signals in respect of color and color depth, a signature-like signal pattern could be generated by principal component analysis for each FA and even different FA mixtures such as edible oils. Hence, structural variation of FAs in edible hot pot oils with heat treatment was successfully monitored by this Au nanosensor over time. This sensor holds great promise in point-of-care inspection of edible oils and fats.

Surfactant Aggregates Encapsulating and Modulating: An Effective Way to Generate Selective and Discriminative Fluorescent Sensors

The heterogeneous structure and dynamic balancing nature of surfactant aggregates make them attractive in developing fluorescent sensors. They can provide a number of advantages, e.g., enhanced fluorescence stability and quantum yield, detection capability in aqueous solutions, and easy operation. Thus, various strategies have been used to construct surfactant aggregate-based fluorescent sensors. Surfactant aggregates play various roles in different strategies and realize multiple sensing behaviors. Many new functions have been discovered for surfactant aggregates in constructing fluorescent sensors. In this feature article, we briefly summarize the development of surfactant aggregate-based fluorescent sensors and their applications in three different types of sensing: selective sensing, multiple analyte sensing, and cross-reactive sensing. For each type of sensing, the design strategies and the roles of surfactant aggregates are particularly introduced. An understanding of these aspects will help to expand the applications of surfactant assemblies in the sensing field.

Array-based Generation of Response Patterns with Common Fluorescent Dyes for Identification of Proteins and Cells

A differential array consisting of commercially available common fluorescent dyes was constructed for the identification of proteins and human cancer cells. Fluorescence of dyes was differently altered by mixing with proteins and human cancer cells, generating response patterns that are unique to the analytes. Linear discriminant analysis of the obtained patterns enabled the accurate identification of eight proteins and three human cancer cells. As this system can be easily prepared, it would offer a unique opportunity for array-based differential biosensing.

Pattern recognition of toxic metal ions using a single-probe thiocoumarin array

A thiocoumarin that exhibits varying fluorescence responses to metal ions in different solvents can be used in a single-probe multiple-solvent array for distinguishing metal ions.

A pH-based sensor array for the detection and identification of proteins using CdSe/ZnS quantum dots as an indicator

A novel and simple fluorescence sensor array was developed for the detection and identification of proteins using pH buffer solutions as sensing elements.

RNA Structural Differentiation: Opportunities with Pattern Recognition

Our awareness and appreciation of the many regulatory roles of RNA have dramatically increased in the past decade. This understanding, in addition to the impact of RNA in many disease states, has renewed interest in developing selective RNA-targeted small molecule probes. However, the fundamental guiding principles in RNA molecular recognition that could accelerate these efforts remain elusive. While high-resolution structural characterization can provide invaluable insight, examples of well-characterized RNA structures, not to mention small molecule:RNA complexes, remain limited. This Perspective provides an overview of the current techniques used to understand RNA molecular recognition when high-resolution structural information is unavailable. We will place particular emphasis on a new method, pattern recognition of RNA with small molecules (PRRSM), that provides rapid insight into critical components of RNA recognition and differentiation by small molecules as well as into RNA structural features.

Poly(p-phenyleneethynylene)-based tongues discriminate fruit juices

We describe a simple optoelectronic tongue, consisting of a positively charged, fluorescent poly(para-phenyleneethynylene), P2, that reacts to fruit juices, when employed at three different pH-values (pH 3, 7, 13). This minimal tongue identifies and discriminates 14 different commercially available apple juices, 6 different grape juices and 5 different black currant juices from each other. A similar, negatively charged fluorescent polymer, P1, also achieved discrimination, but the analyte concentration had to be increased by a factor of 50. A mixture of black currant juice and red grape juice is identified as red grape juice, for specific combinations of grape and black currant juices. A mixture of red and green grape juice passes as red grape juice in our sensing system when it contains more than 70% of red grape juice. The data were obtained by fluorescence quenching of the conjugated polymers and processed by linear discriminant analysis of the collected data.

An optoelectronic tongue based on an array of gold and silver nanoparticles for analysis of natural, synthetic and biological antioxidants

A colorimetric array, which can discriminate 20 food antioxidants of natural, synthetic and biological groups, is described. It consists of gold and silver nanoparticles that were synthesized using six different reducing and/or capping agents. The function of the array relies on the interaction of the antioxidants with the nanoparticles which causes aggregation or morphological changes. This, in turn, causes a change in the sensors' colors. The array produces a unique combination of colors for each antioxidant. The resulting colorations are determined by recording the absorbances of the arrays at wavelengths of 405, 450, 490 and 630 nm, or by capturing the images with a digital camera. The discriminatory ability of the array is investigated by principle component analysis and hierarchical cluster analysis. The method was applied to quantitative assay of gallic acid, caffeic acid, catechin, dopamine, citric acid, butylated hydroxytoluene and ascorbic acid. The respective limits of detection are 4.2, 13, 53, 6.9, 47, 3.5 and 43 nM, respectively. The simultaneous determination of 5 different antioxidants is achieved utilizing partial least square regression. The root mean square errors for prediction of the test set are 0.0650, 0.0782, 0.811, 0.0206 and 0.135 nM for gallic acid, catechin, butylated hydroxytoluene, dopamine, and ascorbic acid, respectively. This method demonstrates excellent potential for analysis of antioxidants in beverages such as tea and lemon juice. Graphical abstract Schematic of a method for the simultaneous determination of several antioxidants based on changes in the color of gold and silver nanoparticles. The antioxidants cause aggregation and/or morphological changes which can be detected by using both image analysis or by colorimetry.

Triple-Indicator-Based Multidimensional Colorimetric Sensing Platform for Heavy Metal Ion Detections

Heavy metals are highly toxic at trace levels and their pollution has shown great threat to the environment and public health worldwide where current detection methods require expensive instrumentation and laborious operation, which can only be accomplished in centralized laboratories. Herein, we report a low-cost, paper-based microfluidic analytical device (μPAD) for facile, portable, and disposable monitoring of mercury, lead, chromium, nickel, copper, and iron ions. Triple indicators or ligands that contain ions or molecules are preloaded on the μPADs and upon addition of a metal ion, the colorimetric indicators will elicit color changes observed by the naked eyes. The color features were quantitatively analyzed in a three-dimensional space of red, green, and blue or the RGB-space using digital imaging and color calibration techniques. The sensing platform offers higher accuracy for cross references, and is capable of simultaneous detection and discrimination of different metal ions in even real water samples. It demonstrates great potential for semiquantitative and even qualitative analysis with a sensitivity below the safe limit concentrations, and a controlled error range.

A naked-eye fluorescent sensor for copper(ii) ions based on a naphthalene conjugate Bodipy dye

A novel naphthalene-Bodipy dye (N-Bodipy) was designed, prepared and characterized. N-Bodipy showed a selective and sensitive recognition toward Cu(ii) ions as a fluorescent antenna group in acetonitrile/water over other metal cations. The complexation between Cu(ii) ions and N-Bodipy gave a specific color change as well as caused fluorescence quenching under long-wavelength light (365 nm). The remarkable quenching effect in fluorescence intensity centered at 538 nm was only observed in the presence of copper(ii) ions. Moreover, the orange color of N-Bodipy solution turned pale-yellow depending on the complexation effect in daylight. The complex stoichiometry was determined using a Job's plot and it was found to be 2 : 1 (ligand/metal). The binding constant was calculated with the Benesi-Hildebrand equation to be 1.39 × 1010 M-1 and the detection limit was 1.28 μM (LOD = 3α/slope, α is the standard deviation) for Cu(ii). The data proved that the binding between N-Bodipy and Cu(ii) is chemically reversible.

Point-of-Care Identification of Bacteria Using Protein-Encapsulated Gold Nanoclusters

The rapid, simple, and reliable identification of the most prevalent pathogens is essential for clinical diagnostics, biology, and food safety. Herein, four protein-encapsulated gold nanoclusters (protein-AuNCs) are designed and prepared as a sensor array for rapid identification of bacteria. The discrimination of six kinds of bacteria, including two kinds of drug-resistant bacteria, is successfully realized by the as-fabricated sensor array. The strategy presented here shows the advantages of easy synthesis and convenient to use. Furthermore, 100% classification accuracy is achieved by the sensor array consisting of two protein-AuNCs probes, demonstrating the design with sufficient diagnostic capacity. Taken together, the developed sensor array holds great promise for facile diagnosis of bacterial infection in resource-limited settings.

Quantitative analysis of modeled ATP hydrolysis in water by a colorimetric sensor array

Self-assembled colorimetric sensors have been prepared from Zn(II)-DPA-attached phenylboronic acid (·Zn) and catechol-type dyes. The ·Zn-dye sensors display selectivity towards oligophosphate over monophosphates. The colorimetric sensor assay (·Zn-dye) is utilized to monitor a model of a metabolic reaction where ATP is hydrolyzed to pyrophosphate (PPi) and AMP.

Sensor arrays made by self-organized nanoreceptors for detection and discrimination of carboxylate drugs

An array of self-organized nanoreceptors based on monolayer-protected gold nanoparticles in combination with different commercially available fluorescent dyes can detect and discriminate nonsteroidal anti-inflammatory drugs.

Supramolecular Dye Aggregate Assembly Enables Ratiometric Detection and Discrimination of Lysine and Arginine in Aqueous Solution

Constructing sensor systems for rapid and selective detection of small biomolecules such as amino acids is a major area of focus in bioanalytical chemistry. Considering the biological relevance of arginine and lysine, significant efforts have been directed to develop fluorescent sensors for their detection. However, these developed sensors suffer from certain disadvantages such as poor aqueous solubility, technically demanding and time-consuming synthetic protocols, and more importantly, most of them operate through single wavelength measurements, making their performance prone to small variations in experimental conditions. Herein, we report a ratiometric sensor that operates through lysine- and arginine-induced dissociation of a supramolecular assembly consisting of emissive H-aggregates of a molecular rotor dye, thioflavin-T (ThT), on the surface of a polyanionic supramolecular host, sulfated β-cyclodextrin. This disassembly brings out the modulation of monomer-aggregate equilibrium in the system which acts as an ideal scheme for the ratiometric detection of lysine and arginine in the aqueous solution. Besides facile framework of our sensor system, it employs a commercially available inexpensive probe molecule, ThT, which provides an added advantage over other sensor systems that employ synthetically demanding probe molecules. Importantly, the distinctive feature of the ratiometric detection of arginine and lysine provides an inherent advantage of increased accuracy in quantitative analysis. Interestingly, we have also demonstrated that arginine displays a multiwavelength distinctive recognition pattern which distinguishes it from lysine, using a single supramolecular ensemble. Furthermore, our sensor system also shows response in heterogeneous, biologically complex media of serum samples, thus extending its possible use in real-life applications.

Fluorescent Binary Ensemble Based on Pyrene Derivative and Sodium Dodecyl Sulfate Assemblies as a Chemical Tongue for Discriminating Metal Ions and Brand Water

Enormous effort has been put to the detection and recognition of various heavy metal ions due to their involvement in serious environmental pollution and many major diseases. The present work has developed a single fluorescent sensor ensemble that can distinguish and identify a variety of heavy metal ions. A pyrene-based fluorophore (PB) containing a metal ion receptor group was specially designed and synthesized. Anionic surfactant sodium dodecyl sulfate (SDS) assemblies can effectively adjust its fluorescence behavior. The selected binary ensemble based on PB/SDS assemblies can exhibit multiple emission bands and provide wavelength-based cross-reactive responses to a series of metal ions to realize pattern recognition ability. The combination of surfactant assembly modulation and the receptor for metal ions empowers the present sensor ensemble with strong discrimination power, which could well differentiate 13 metal ions, including Cu²⁺, Co²⁺, Ni²⁺, Cr³⁺, Hg²⁺, Fe³⁺, Zn²⁺, Cd²⁺, Al³⁺, Pb²⁺, Ca²⁺, Mg²⁺, and Ba²⁺. Moreover, this single sensing ensemble could be further applied for identifying different brands of drinking water.

Patterned Colloidal Photonic Crystals

Colloidal photonic crystals (PCs) have been well developed because they are easy to prepare, cost-effective, and versatile with regards to modification and functionalization. Patterned colloidal PCs contribute a novel approach to constructing high-performance PC devices with unique structures and specific functions. In this review, an overview of the strategies for fabricating patterned colloidal PCs, including patterned substrate-induced assembly, inkjet printing, and selective immobilization and modification, is presented. The advantages of patterned PC devices are also discussed in detail, for example, improved detection sensitivity and response speed of the sensors, control over the flow direction and wicking rate of microfluidic channels, recognition of cross-reactive molecules through an array-patterned microchip, fabrication of display devices with tunable patterns, well-arranged RGB units, and wide viewing-angles, and the ability to construct anti-counterfeiting devices with different security strategies. Finally, the perspective of future developments and challenges is presented.

Nanoparticle-based optical sensor arrays

As in many other methods that have integrated nanoparticles (NPs), the chemical nose/tongue strategy has also progressed greatly since the entrance of NPs into this field. The fascinating tunable physicochemical properties of NPs have made them powerful candidates for array-based sensing platforms and have enabled the development of real-time, sensitive and portable systems that are able to target complex mixtures of analytes. In particular, the unique optical properties of NPs have a key role in providing promising array-based sensing approaches. This review will describe the main aspects and processes of most common NP-based optical sensor arrays. The fundamental steps in the design of a sensor array together with details of each step would be provided. The review begins with the principles of optical sensor arrays and presents the concept of cross-reactivity as the main criterion in the selection of sensing elements. Changes in the absorption and emission properties of the assembled sensing elements are categorized into two main classes of optical signals (colorimetric and fluorometric). Popular chemometric methods used for analyzing the data acquired by a sensor array have also been briefly introduced. On the basis of the objective and the desired application, different types of plasmonic and fluorescent NP that possess unique opto-physical properties have been presented as available choices in the design of sensing elements. The vast number of applications of NP-based optical sensor arrays published throughout the literature have then been reviewed according to their mechanism of interaction and the type of optical signal. Finally, the remaining challenges and future directions in this topic have been highlighted.

AIE-doped poly(ionic liquid) photonic spheres: a single sphere-based customizable sensing platform for the discrimination of multi-analytes

By simultaneously exploiting the unique properties of ionic liquids and aggregation-induced emission (AIE) luminogens, as well as photonic structures, a novel customizable sensing system for multi-analytes was developed based on a single AIE-doped poly(ionic liquid) photonic sphere. It was found that due to the extraordinary multiple intermolecular interactions involved in the ionic liquid units, one single sphere could differentially interact with broader classes of analytes, thus generating response patterns with remarkable diversity. Moreover, the optical properties of both the AIE luminogen and photonic structure integrated in the poly(ionic liquid) sphere provide multidimensional signal channels for transducing the involved recognition process in a complementary manner and the acquisition of abundant and sufficient sensing information could be easily achieved on only one sphere sensor element. More importantly, the sensing performance of our poly(ionic liquid) photonic sphere is designable and customizable through a simple ion-exchange reaction and target-oriented multi-analyte sensing can be conveniently realized using a selective receptor species, such as counterions, showing great flexibility and extendibility. The power of our single sphere-based customizable sensing system was exemplified by the successful on-demand detection and discrimination of four multi-analyte challenge systems: all 20 natural amino acids, nine important phosphate derivatives, ten metal ions and three pairs of enantiomers. To further demonstrate the potential of our spheres for real-life application, 20 amino acids in human urine and their 26 unprecedented complex mixtures were also discriminated between by the single sphere-based array.

Aggregation-Induced-Emission Materials with Different Electric Charges as an Artificial Tongue: Design, Construction, and Assembly with Various Pathogenic Bacteria for Effective Bacterial Imaging and Discrimination

Imaging-based total bacterial count and type identification of bacteria play crucial roles in clinical diagnostics, public health, biological and medical science, and environmental protection. Herein, we designed and synthesized a series of tetraphenylethenes (TPEs) functionalized with one or two aldehyde, carboxylic acid, and quaternary ammonium groups, which were successfully used as fluorescent materials for rapid and efficient staining of eight kinds of representative bacterial species, including pathogenic bacteria Vibrio cholera, Klebsiella pneumoniae, and Listeria monocytogenes and potential bioterrorism agent Yersinia pestis. By comparing the fluorescence intensity changes of the aggregation-induced-emission (AIE) materials before and after bacteria incubation, the sensing mechanisms (electrostatic versus hydrophobic interactions) were simply discussed. Moreover, the designed AIE materials were successfully used as an efficient artificial tongue for bacteria discrimination, and all of the bacteria tested were identified via linear discriminant analysis. Our current work provided a general method for simultaneous broad-spectrum bacterial imaging and species discrimination, which is helpful for bacteria surveillance in many fields.

Cross-Reactive Plasmonic Aptasensors for Controlled Substance Identification

In this work, we developed an assay to determine if an arbitrary white powder is a controlled substance, given the plasmonic response of aptamer-gold nanoparticle conjugates (Apt-AuNPs). Toward this end, we designed Apt-AuNPs with specific a response to common controlled substances without cross reactivity to chemicals typically used as fillers in street formulations. Plasmonic sensor variation was shown to produce unique data fingerprints for each chemical analyzed, supporting the application of multivariate statistical techniques to annotate unknown samples by chemical similarity. Importantly, the assay takes less than fifteen minutes to run, and requires only a few micrograms of the material, making the proposed assay easily deployable in field operations.

Colorimetric Fingerprints of Gold Nanorods for Discriminating Catecholamine Neurotransmitters in Urine Samples

Catecholamine neurotransmitters, generally including dopamine (DA), epinephrine (EP) and norepinephrine (NE) are known as substantial indicators of various neurological diseases. Simultaneous detection of these compounds and their metabolites is highly recommended in early clinical diagnosis. To this aim, in the present contribution, a high performance colorimetric sensor array has been proposed for the detection and discrimination of catecholamines based on their reducing ability to deposit silver on the surface of gold nanorods (AuNRs). The amassed silver nanoshell led to a blue shift in the longitudinal localized surface plasmon resonance (LSPR) peak of AuNRs, creating a unique pattern for each of the neurotransmitters. Hierarchical cluster analysis (HCA) and linear discriminate analysis (LDA) pattern recognition techniques were employed to identify DA, EP and NE. The proposed colorimetric array is able to differentiate among individual neurotransmitters as well as their mixtures, successfully. Finally, it was shown that the sensor array can identify these neurotransmitters in human urine samples.

High-Throughput Assay for Enantiomeric Excess Determination in 1,2- and 1,3-Diols and Direct Asymmetric Reaction Screening

A simple and efficient method for determination of the yield, enantiomeric/diasteriomeric excess (ee/de), and absolute configuration of crude chiral diols without the need of work-up and product isolation in a high throughput setting is described. This approach utilizes a self-assembled iminoboronate ester formed as a product by dynamic covalent self-assembly of a chiral diol with an enantiopure fluorescent amine such as tryptophan methyl ester or tryptophanol and 2-formylphenylboronic acid. The resulting diastereomeric boronates display different photophysical properties and allow for fluorescence-based ee determination of molecules containing a 1,2- or 1,3-diol moiety. This method has been utilized for the screening of ee in a number of chiral diols including atorvastatin, a statin used for the treatment of hypercholesterolemia. Noyori asymmetric hydrogenation of benzil was performed in a highly parallel fashion with errors <1 % ee confirming the feasibility of the systematic examination of crude products from the parallel asymmetric synthesis in real time and in a high-throughput screening (HTS) fashion.

Fluorescent chirality recognition by simple boronate ensembles with aggregation-induced emission capability

Chiral boronate ensembles showed enantioselective aggregation behaviors for chiral diamines and cinchona alkaloids, enabling the fluorescent recognition of their chirality.

Fluorescent sensing arrays for cations and anions

A review of fluorescent sensing arrays for anions and cations, highlighting promising strategies and directions for future research.

Fluorescent binary ensemble with pattern recognition ability for identifying multiple metalloproteins with applications in serum and urine

A fluorescent binary ensemble with multiple-wavelength cross-reactivity functioning as a discriminative sensor to identify different metalloproteins in serum or urine solution.

Discrimination of Metalloproteins by a Mini Sensor Array Based on Bispyrene Fluorophore/Surfactant Aggregate Ensembles

Fluorescent sensor arrays with pattern recognition ability have been widely used to detect and identify multiple chemically similar analytes. In the present work, two particular bispyrene fluorophores containing hydrophilic oligo(oxyethylene) spacer, 6 and 4, were synthesized, but one is with and the other is without cholesterol unit. Their ensembles with cationic surfactant (CTAB) assemblies realize multiple fluorescence responses to different metalloproteins, including hemoglobin, myoglobin, ferritin, cytochrome c, and alcohol dehydrogenase. The combination of fluorescence variation at monomer and excimer emission of the two binary sensor ensembles enables the mini sensor array to provide a specific fingerprint pattern to each metalloprotein. Linear discriminant analysis shows that the two-ensemble-sensor-based array could well discriminate the five tested metalloproteins. The present work realizes using a mini sensor array to accomplish discrimination of complex analytes like proteins. They also display a very high sensitivity to the tested metalloproteins with detection limits in the range of picomolar concentration.

A RGB-Type Quantum Dot-based Sensor Array for Sensitive Visual Detection of Trace Formaldehyde in Air

A simple colorimetric sensor array based on red-emitting CdTe QDs and green-colored fluorescein that exhibited RGB-type color change was proposed for visual detection of trace formaldehyde. In the presence of formaldehyde, the red fluorescence from CdTe QDs was quenched while the green fluorescein was inert thus as a reference. Through harvesting the varied quenching efficiency of different ligand-capped CdTe QDs by formaldehyde, a simple sensor array can be constructed for both selective detection of formaldehyde with high sensitivity (LOD of 0.08 ppm) and identification of the existence of potential interference from acetaldehyde. The quenching mechanisms of formaldehyde toward different ligand capped CdTe QDs were studied with fluorescence lifetime, zeta potential, and also theoretical calculations. The results from theoretical calculations were in good agreement with the experimental results. The proposed sensor array was successfully explored for visual analysis of formaldehyde in indoor air samples.

Glycoluril-Derived Molecular Clips are Potent and Selective Receptors for Cationic Dyes in Water

Molecular clip 1 remains monomeric in water and engages in host-guest recognition processes with suitable guests. We report the K_a values for 32 1⋅guest complexes measured by ¹ H NMR, UV/Vis, and fluorescence titrations. The cavity of 1 is shaped by aromatic surfaces of negative electrostatic potential and therefore displays high affinity and selectivity for planar and cationic aromatic guests that distinguishes it from CB[n] receptors that prefer aliphatic over aromatic guests. Electrostatic effects play a dominant role in the recognition process whereby ion-dipole interactions may occur between ammonium ions and the C=O groups of 1, between the SO₃^- groups of 1 and pendant cationic groups on the guest, and within the cavity of 1 by cation-π interactions. Host 1 displays a high affinity toward dicationic guests with large planar aromatic surfaces (e.g. naphthalene diimide NDI+ and perylene diimide PDI+) and cationic dyes derived from acridine (e.g. methylene blue and azure A). The critical importance of cation-π interactions was ascertained by a comparison of analogous neutral and cationic guests (e.g. methylene violet vs. methylene blue; quinoline vs. N-methylquinolinium; acridine vs. N-methylacridinium; neutral red vs. neutral red H⁺ ) the affinities of which differ by up to 380-fold. We demonstrate that the high affinity of 1 toward methylene blue (K_a =3.92×10⁷  m^-1 ; K_d =25 nm) allows for the selective sequestration and destaining of U87 cells stained with methylene blue.

A Miniaturized Therapeutic Chromophore for Multiple Metal Pollutant Sensing, Pathological Metal Diagnosis and Logical Computing

The efficacy of a miniaturized unimolecular analytic system is illustrated. The easily accessible therapeutic chromophore "temoporfin", which responds differentially to bound metals at multiple wavelengths of Q-band absorption using chemometric analysis, expeditiously detects and discriminates a wide range of metals regarded as priority pollutants in water and hence may also be used for diagnosis of medically relevant metals in human urine. The molecule was further investigated as an electronic logic device, e.g. keypad lock device, to authorize multiple highly secure chemical passwords for information protection.