Geobacter sulfurreducens biofilms developed under different growth conditions on glassy carbon electrodes: insights using cyclic voltammetry

Electrochemically active biofilms: facts and fiction. A review

This review examines the electrochemical techniques used to study extracellular electron transfer in the electrochemically active biofilms that are used in microbial fuel cells and other bioelectrochemical systems. Electrochemically active biofilms are defined as biofilms that exchange electrons with conductive surfaces: electrodes. Following the electrochemical conventions, and recognizing that electrodes can be considered reactants in these bioelectrochemical processes, biofilms that deliver electrons to the biofilm electrode are called anodic, ie electrode-reducing, biofilms, while biofilms that accept electrons from the biofilm electrode are called cathodic, ie electrode-oxidizing, biofilms. How to grow these electrochemically active biofilms in bioelectrochemical systems is discussed and also the critical choices made in the experimental setup that affect the experimental results. The reactor configurations used in bioelectrochemical systems research are also described and the authors demonstrate how to use selected voltammetric techniques to study extracellular electron transfer in bioelectrochemical systems. Finally, some critical concerns with the proposed electron transfer mechanisms in bioelectrochemical systems are addressed together with the prospects of bioelectrochemical systems as energy-converting and energy-harvesting devices.

Negative faradaic resistance in extracellular electron transfer by anode-respiring Geobacter sulfurreducens cells

Geobacter sulfurreducens is a gram-negative δ-proteobacterium that is capable of transferring respiratory electrons to solid-state extracellular acceptors, including anodes, via abundant c-type cytochromes expressed in the outer membrane. As extracellular electron transfer (EET) to solid-state acceptors can proceed without the addition of exogenous mediators, this microbe has attracted significant attention with respect to energy conversion between electrical and chemical energy. Here, we revealed that clear redox peaks were present in the whole-cell cyclic voltammogram of G. sulfurreducens at around -0.15 V vs Ag|AgCl when tin-doped In(2)O(3) (ITO) glass was used as an anode. Interestingly, the EET current decreased in the potential region more positive than the midpoint potential (E(m)) of the redox peak. Thus, EET of anode-respiring G. sulfurreducens cells exhibited a negative Faradaic resistance (NFR) characteristic at the E(m) of the redox peak, in contrast to general electrochemical systems where the Faradaic current typically increases with increasing overpotential.

Electroactive mixed culture derived biofilms in microbial bioelectrochemical systems: the role of pH on biofilm formation, performance and composition

The pH-value played a crucial role for the development and current production of anodic microbial electroactive biofilms. It was demonstrated that only a narrow pH-window, ranging from pH 6 to 9, was suitable for growth and operation of biofilms derived from pH-neutral wastewater. Any stronger deviation from pH neutral conditions led to a substantial decrease in the biofilm performance. Thus, average current densities of 151, 821 and 730 μA cm(-2) were measured for anode biofilms grown and operated at pH 6, 7 and 9 respectively. The microbial diversity of the anode chamber community during the biofilm selection process was studied using the low cost method flow-cytometry. Thereby, it was demonstrated that the pH value as well as the microbial inocula had an impact on the resulting anode community structure. As shown by cyclic voltammetry the electron transfer thermodynamics of the biofilms was strongly depending on the solution's pH-value.

Electrocatalytic activity of anodic biofilm responses to pH changes in microbial fuel cells

This study investigates the effects of anodic pH on electricity generation in microbial fuel cells (MFCs) and the intrinsic reasons behind them. In a two-chamber MFC, the maximum power density is 1170 ± 58 mW m(-2) at pH 9.0, which is 29% and 89% higher than those working at pH 7.0 and 5.0, respectively. Electrochemical measurements reveal that pH affects the electron transfer kinetics of anodic biofilms. The apparent electron transfer rate constant (k(app)) and exchange current density (i(0)) are greater whereas the charge transfer resistance (R(ct)) is smaller at pH 9.0 than at other conditions. Scanning electron microscopy verifies that alkaline conditions benefit biofilm formation in MFCs. These results demonstrate that electrochemical interactions between bacteria and electrodes in MFCs are greatly enhanced under alkaline conditions, which can be one of the important reasons for the improved MFC output.