Recent developments in electrochemistry at the interface between two immiscible electrolyte solutions for ion sensing

The most recent developments on electrochemical sensing of ions at the liquid–liquid interface are reviewed here.

Ion-transfer voltammetric determination of folic acid at meso-liquid–liquid interface arrays

Voltammetric studies on the simple ion transfer (IT) behaviors of an important water-soluble B-vitamin, folic acid (FA), at the liquid–liquid (L–L) interface were firstly performed and applied as a novel detection method for FA under physiological conditions. This work provides a new and attractive strategy for the detection of FA⁻ and other biological anions.

Electrochemical behaviour of ferrocenes in tributylmethylphosphonium methyl sulfate mixtures with water and 1,2-dichloroethane

Electron transfer (ET) reactions in ionic liquid (IL)|organic solvent (1,2-dichloroethane, DCE) and IL|water mixtures were investigated using a Pt disk ultramicroelectrode (UME) along with ferrocene (Fc) and ferrocenemethanol (FcCH2OH) redox probes as electroactive species dissolved in the respective mixtures. The IL utilized was tributylmethylphosphonium methyl sulfate (P4441CH3SO4). The diffusion coefficient of each redox species was determined at each incremental increase of DCE or water to the IL using a chronoamperometric technique that is concentration independent. The IL|DCE mixture exhibited little change in the Fc diffusion coefficient, DFc, up to a DCE mole fraction (χDCE) of 0.5; the observed value, 2.0 × 10−8 cm2 s−1, agrees well with that typically reported for ILs in the literature. After which, the DFc quickly rose to a value commonly found in conventional molecular solvents, 1.3 × 10−5 cm2 s−1 (at χDCE = 0.8). An analogous result was not observed for IL|water mixtures using FcCH2OH, such that [Formula: see text] varied from 0.2 to 1.2 × 10−9 cm2·s−1 at a [Formula: see text] of 0 to 0.8. It was proposed that a large increase in the DFc in the IL|DCE mixture versus [Formula: see text] in the IL|water series was owing to P4441CH3SO4’s more hydrophobic character. Its hydrophobicity was quantified by measuring the formal ion transfer potentials of the IL component ions at a water|DCE immiscible interface.

Open carbon nanopipettes as resistive-pulse sensors, rectification sensors, and electrochemical nanoprobes

Nanometer-sized glass and quartz pipettes have been widely used as a core of chemical sensors, patch clamps, and scanning probe microscope tips. Many of those applications require the control of the surface charge and chemical state of the inner pipette wall. Both objectives can be attained by coating the inner wall of a quartz pipette with a nanometer-thick layer of carbon. In this letter, we demonstrate the possibility of using open carbon nanopipettes (CNP) produced by chemical vapor deposition as resistive-pulse sensors, rectification sensors, and electrochemical nanoprobes. By applying a potential to the carbon layer, one can change the surface charge and electrical double-layer at the pipette wall, which, in turn, affect the ion current rectification and adsorption/desorption processes essential for resistive-pulse sensors. CNPs can also be used as versatile electrochemical probes such as asymmetric bipolar nanoelectrodes and dual electrodes based on simultaneous recording of the ion current through the pipette and the current produced by oxidation/reduction of molecules at the carbon nanoring.

Fabrication of metal nanoelectrodes by interfacial reactions

Despite great improvements in the past decades, the controllable fabrication of metal nanoelectrodes still remains very challenging. In this work, a simple and general way to fabricate metal nanoelectrodes (Ag, Au, and Pt) is developed. On the basis of interfacial reactions at nano-liquid/liquid interfaces supported at nanopipettes, the nanoparticles can be formed in situ and have been used to block the orifices of pipettes to make nanoelectrodes. The effect of the driving force for interfacial reaction at the liquid/liquid interface, the ratio of redox species in organic and aqueous phases, and the surface charge of the inner wall of a pipette have been studied. The fabricated nanoelectrodes have been characterized by scanning electron microscopy (SEM) and electrochemical techniques. A silver electrode with about 10 nm in radius has been employed as the scanning electrochemical microscopy (SECM) probe to explore the thickness of a water/nitrobenzene (W/NB) interface, and this value is equal to 0.8 ± 0.1 nm (n = 5). This method of fabrication of nanoelectrodes can be extended to other metal or semiconductor electrodes.

Superhydrophobicity-mediated electrochemical reaction along the solid-liquid-gas triphase interface: edge-growth of gold architectures

A superhydrophobic pillar-structured electrode leads to uncommon electrochemical behavior. The anti-wetting reaction surface restricts the contact between electrolyte and electrode to the pillar tops, as a result of trapped air pockets in the gaps between pillars. The electrochemical reaction occurs mainly at the solid/liquid/gas triphase interface, instead of the traditional solid/liquid diphase surface, yielding unique edge-growth structures - for example gold microflowers - on the top of each pillar.

Compartmental genomics in living cells revealed by single-cell nanobiopsy

The ability to study the molecular biology of living single cells in heterogeneous cell populations is essential for next generation analysis of cellular circuitry and function. Here, we developed a single-cell nanobiopsy platform based on scanning ion conductance microscopy (SICM) for continuous sampling of intracellular content from individual cells. The nanobiopsy platform uses electrowetting within a nanopipette to extract cellular material from living cells with minimal disruption of the cellular milieu. We demonstrate the subcellular resolution of the nanobiopsy platform by isolating small subpopulations of mitochondria from single living cells, and quantify mutant mitochondrial genomes in those single cells with high throughput sequencing technology. These findings may provide the foundation for dynamic subcellular genomic analysis.

Anion transfer across “anion channels” at the liquid/liquid interface modified by anion-exchange membrane

A novel strategy is proposed to mimic anion channels and study anion transfer reactions at the water/1,2-dichloroethane (W/DCE) interface modified by a homogeneous anion-exchange membrane (AEM).

Heterogeneous electron transfer at nanoscopic electrodes: importance of electronic structures and electric double layers

Recent insights into the nanoscopic electrode size and structure effects on heterogeneous ET kinetics are presented.

Electrochemical Sensing and Imaging Based on Ion Transfer at Liquid/Liquid Interfaces

Here we review the recent applications of ion transfer (IT) at the interface between two immiscible electrolyte solutions (ITIES) for electrochemical sensing and imaging. In particular, we focus on the development and recent applications of the nanopipet-supported ITIES and double-polymer-modified electrode, which enable the dynamic electrochemical measurements of IT at nanoscopic and macroscopic ITIES, respectively. High-quality IT voltammograms are obtainable using either technique to quantitatively assess the kinetics and dynamic mechanism of IT at the ITIES. Nanopipet-supported ITIES serves as an amperometric tip for scanning electrochemical microscopy to allow for unprecedentedly high-resolution electrochemical imaging. Voltammetric ion sensing at double-polymer-modified electrodes offers high sensitivity and unique multiple-ion selectivity. The promising future applications of these dynamic approaches for bioanalysis and electrochemical imaging are also discussed.

Single-shot characterization of enzymatic reaction constants Km and kcat by an acoustic-driven, bubble-based fast micromixer

In this work we present an acoustofluidic approach for rapid, single-shot characterization of enzymatic reaction constants K(m) and k(cat). The acoustofluidic design involves a bubble anchored in a horseshoe structure which can be stimulated by a piezoelectric transducer to generate vortices in the fluid. The enzyme and substrate can thus be mixed rapidly, within 100 ms, by the vortices to yield the product. Enzymatic reaction constants K(m) and k(cat) can then be obtained from the reaction rate curves for different concentrations of substrate while holding the enzyme concentration constant. We studied the enzymatic reaction for β-galactosidase and its substrate (resorufin-β-D-galactopyranoside) and found K(m) and k(cat) to be 333 ± 130 μM and 64 ± 8 s(-1), respectively, which are in agreement with published data. Our approach is valuable for studying the kinetics of high-speed enzymatic reactions and other chemical reactions.

Chiral interactions of the drug propranolol and α1-acid-glycoprotein at a micro liquid-liquid interface

The investigation of chiral interactions of drugs with plasma proteins is of fundamental importance for drug efficacy and toxicity studies. In this paper, we demonstrate a simple liquid-liquid interface procedure for investigating chiral interactions. Chiral discrimination of the enantiomers of a basic drug, propranolol, was achieved at a micro liquid-liquid interface, using α(1)-acid-glycoprotein (AGP) as a chiral acute phase plasma protein. When the protein is added to an aqueous phase containing the enantiomers of propranalol hydrochloride, the binding of (S)- and (R)-propranolol hydrochloride to the protein results in a decrease in the cyclic voltammetry (CV) and differential pulse voltammetry (DPV) current responses corresponding to the decrease in transfer of propranolol at an aqueous-1,2-dichloroethane interface. This decrease is a consequence of the complexation of the drug and the protein. The complex drug-protein does not transfer across the interface nor changes the transfer potential of the uncomplexed form of propranolol enantiomers. The bound concentration of propranolol enantiomers in the presence of AGP was found to be greater for (S)-propranolol than (R)-propranolol for solutions containing constant concentrations of AGP (50 μM). Scatchard analysis yielded association constants of 2.7 and 1.3 × 10(5) M(-1) for (S)- and (R)-propranolol, respectively.

Electrochemical mechanism of ion-ionophore recognition at plasticized polymer membrane/water interfaces

Here, we report on the first electrochemical study that reveals the kinetics and molecular level mechanism of heterogeneous ion-ionophore recognition at plasticized polymer membrane/water interfaces. The new kinetic data provide greater understanding of this important ion-transfer (IT) process, which determines various dynamic characteristics of the current technologies that enable highly selective ion sensing and separation. The theoretical assessment of the reliable voltammetric data confirms that the dynamics of the ionophore-facilitated IT follows the one-step electrochemical (E) mechanism controlled by ion-ionophore complexation at the very interface in contrast to the thermodynamically equivalent two-step electrochemical-chemical (EC) mechanism based on the simple transfer of an aqueous ion followed by its complexation in the bulk membrane. Specifically, cyclic voltammograms of Ag(+), K(+), Ca(2+), Ba(2+), and Pb(2+) transfers facilitated by highly selective ionophores are measured and analyzed numerically using the E mechanism to obtain standard IT rate constants in the range of 10(-2) to 10(-3) cm/s at both plasticized poly(vinyl chloride) membrane/water and 1,2-dichloroethane/water interfaces. We demonstrate that these strongly facilitated IT processes are too fast to be ascribed to the EC mechanism. Moreover, the little effect of the viscosity of nonaqueous media on the IT kinetics excludes the EC mechanism, where the kinetics of simple IT is viscosity-dependent. Finally, we employ molecular level models for the E mechanism to propose three-dimensional ion-ionophore complexation at the two-dimensional interface as the unique kinetic requirement for the thermodynamically facilitated IT.