Amplified energy transfer in conjugated polymer nanoparticle tags and sensors

Location and freedom of single and double guest in dye-doped polymer nanoparticles

We report on time-resolved fluorescence anisotropy studies of poly(9-vinylcarbazole) (PVK) nanoparticles (NPs) encapsulating Coumarin 153 (C153) and Nile Red (NR).

Fluorene-based macromolecular nanostructures and nanomaterials for organic (opto)electronics

Nanotechnology not only opens up the realm of nanoelectronics and nanophotonics, but also upgrades organic thin-film electronics and optoelectronics. In this review, we introduce polymer semiconductors and plastic electronics briefly, followed by various top-down and bottom-up nano approaches to organic electronics. Subsequently, we highlight the progress in polyfluorene-based nanoparticles and nanowires (nanofibres), their tunable optoelectronic properties as well as their applications in polymer light-emitting devices, solar cells, field-effect transistors, photodetectors, lasers, optical waveguides and others. Finally, an outlook is given with regard to four-element complex devices via organic nanotechnology and molecular manufacturing that will spread to areas such as organic mechatronics in the framework of robotic-directed science and technology.

Al³⁺-induced far-red fluorescence enhancement of conjugated polymer nanoparticles and its application in live cell imaging

Fluorescent nanoparticles (NPs) for Al(3+) sensing with high selectivity were developed from a type of carbazole-based conjugated polymer with a two-dimensional donor-π bridge-acceptor (D-π-A) structure. These NPs are characterized by their small particle diameter (∼18 nm), far-red fluorescence emission (centered ∼710 nm), and Al(3+)-induced fluorescence enhancement with high selectivity owing to an Al(3+)-triggered inhibition on the intramolecular charge transfer (ICT) processes between the conjugated backbone and the pendant acceptors. This type of nanoparticle is easily suspended in aqueous solutions, indicating their practical applicability in physiological media, and their ability for intracellular Al(3+) sensing was confirmed. As compared to other types of conjugated polymer based probes showing metal ion mediated fluorescence quenching, these as-prepared NPs possess analyte-enhanced fluorescence emission, which is analytically favored in terms of sensitivity and selectivity. Fluorescence emission with wavelengths in the biological window of maximum optical transparency (∼700 to 1000 nm) is expected to impart a salient advantage for biological detection applications to these as-prepared probes. The superior features of merit of this new type of fluorescent probe, together with the validation of practicability for intracellular Al(3+) ion sensing, are indicative of their potential for application in fluorescence-based imaging and sensing, such as investigations on Al(3+)-related physiological and pathological processes.

Fluorescent organic nanocrystals and non-doped nanoparticles for biological applications

The recently developed fluorescent organic nanocrystals and non-doped nanoparticles (FONs) occupy a special position among other nanoparticle systems that are used for studying a variety of fundamental processes in the life sciences. Understanding their particular photophysical behavior allows proper design of FONs. The usual preparation methods are described. It is shown that FONs lead to original applications as biochemical sensors and biolabels for immunoassays. They also show high potentialities for bio-imaging of cell cultures, drug-delivery control, angiography and in vivo bio-imaging of solid tumors.

Fluorescent π-conjugated polymer dots versus self-assembled small-molecule nanoparticles: what's the difference?

Fluorescent nanoparticles based on π-conjugated small molecules and polymers are two different classes of π-conjugated systems that have attracted much interest. To date, both emerging classes have only been studied separately and showed no clear differences in their properties. Herein these nanoparticles are compared on the basis of a fluorene co-polymer and its corresponding small molecule. Both systems formed nanoparticles with the same diameter, whereas the fluorescence properties clearly differed. In case of the polymer the fluorescence diminished, whereas for the small molecules the fluorescence increased. In addition, the capability of encapsulation and release of a hydrophobic dye from the fluorescent nanoparticles was studied. For the polymer system, encapsulation was highly efficient and no release was observed, whereas for the small molecule system encapsulation was less efficient and release of the dye was observed. These studies show a clear difference between small molecules and polymers which has important implications for the design of fluorescent nanoparticles.

Conjugated oligomer-based fluorescent nanoparticles as functional nanocarriers for nucleic acids delivery

Oligonucleotides such as siRNA and plasmid DNA (pDNA) have great potential for gene therapies. Multifunctional, environment-resistant carriers with imaging capabilities are required to track the assembly and disassembly of oligonucleotides, monitor the delivery processes, and develop new delivery systems. Conjugated polymers and oligomers can potentially be used as novel materials for functional nanocarriers with both delivery and imaging abilities. In this work, a novel π-conjugated oligomer 4,7-(9,9'-bis(6-adenine hexyl)fluorenyl)-2,1,3-benzothiadiazole (OFBT-A) modified with nucleotide adenine (A) groups in its side chains is synthesized and characterized. Fluorescent nanoparticles based on the π-conjugated oligomers OFBT-A are developed as novel functional nanocarriers for oligonucleotides. Single-stranded DNA (ssDNA) TR-T5 labeled with Texas Red (TR) fluorescent dye is selected as a model payload oligonucleotide. The capture abilities and stability of OFBT-A are investigated by monitoring the fluorescence resonance energy transfer (FRET) efficiency between the OFBT-A nanoparticles and TR labels in solution. The OFBT-A/TR-T5 composites are stable in solution at high ionic strengths (0-500 mM) and have a wide working pH range, from 3.0 to 9.5. The in vitro profile demonstrates that the release of the TR-DNA is induced by the ssDNA A43, which has a high charge density. The release process is monitored by measuring the changes in FRET efficiency and fluorescence color for the OFBT-A/TR-T5 composites. Using this carrier, the uptake of TR-DNA by A549 lung cancer cells is observed. Both the OFBT-A nanoparticles and the OFBT-A/TR-T5 composites show high cytocompatibility. We anticipate that these novel functional nanocarriers will provide a safe strategy for monitoring the gene delivery process.

Lyophilization of semiconducting polymer dot bioconjugates

Semiconducting polymer dot (Pdot) bioconjugates are a new class of ultrabright fluorescent probes. Here, we report a procedure for lyophilizing Pdot bioconjugates so that they successfully retain their optical properties, colloidal stability, and cell-targeting capability during storage. We found that, when Pdot bioconjugates were lyophilized in the presence of 10% sucrose, the rehydrated Pdot bioconjugates did not show any signs of aggregation and exhibited the same hydrodynamic diameters as before lyophilization. The brightness of the lyophilized Pdots was at least as good as before lyophilization, but in some cases, the quantum yield of lyophilized Pdots curiously showed an improvement. Finally, using flow cytometry, we demonstrated that lyophilized Pdot bioconjugates retained their biological targeting properties and were able to effectively label cells; in fact, cells labeled with lyophilized Pdot bioconjugates composed of PFBT, which were stored for 6 months at -80 °C, were ~22% brighter than those labeled with identical but unlyophilized Pdot bioconjugates. These results indicate lyophilization may be a preferred approach for storing and shipping Pdot bioconjugates, which is an important practical consideration for ensuring Pdots are widely adopted in biomedical research.

Highly fluorescent semiconducting polymer dots for biology and medicine

In recent years, semiconducting polymer nanoparticles have attracted considerable attention because of their outstanding characteristics as fluorescent probes. These nanoparticles, which primarily consist of π-conjugated polymers and are called polymer dots (Pdots) when they exhibit small particle size and high brightness, have demonstrated utility in a wide range of applications such as fluorescence imaging and biosensing. In this review, we summarize recent findings of the photophysical properties of Pdots which speak to the merits of these entities as fluorescent labels. This review also highlights the surface functionalization and biomolecular conjugation of Pdots, and their applications in cellular labeling, in vivo imaging, single-particle tracking, biosensing, and drug delivery. We discuss the relationship between the physical properties and performance, and evaluate the merits and limitations of the Pdot probes for certain imaging tasks and fluorescence assays. We also tackle the current challenges of Pdots and share our perspective on the future directions of the field.

Photoswitching-enabled novel optical imaging: innovative solutions for real-world challenges in fluorescence detections

Because of its ultrasensitivity, fluorescence offers a noninvasive means to investigate biomolecular mechanisms, pathways, and regulations in living cells, tissues, and animals. However, real-world applications of fluorescence technologies encounter many practical challenges. For example, the intrinsic heterogeneity of biological samples always generates optical interferences. High background such as autofluorescence can often obscure the desired signals. Finally, the wave properties of light limit the spatial resolution of optical microscopy. The key to solving these problems involves using chemical structures that can modulate the fluorescence output. Photoswitchable fluorescent molecules that alternate their emissions between two colors or between bright-and-dark states in response to external light stimulation form the core of these technologies. For example, molecular fluorescence modulation can switch fluorophores on and off. This feature supports super-resolution, which enhances resolution by an order of magnitude greater than the longstanding diffraction-limit barrier. The reversible modulation of such probes at a particular frequency significantly amplifies the frequency-bearing target signal while suppressing interferences and autofluorescence. In this Account, we outline the fundamental connection between constant excitation and oscillating fluorescence. To create molecules that will convert a constant excitation into oscillating emission, we have synthesized photoswitchable probes and demonstrated them as proofs of concept in super-resolution imaging and frequency-domain imaging. First, we introduce the design of molecules that can convert constant excitation into oscillating emission, the key step in fluorescence modulation. Then we discuss various technologies that use fluorescence modulation: super-resolution imaging, dual-color imaging, phase-sensitive lock-in detection, and frequency-domain imaging. Finally, we present two biological applications to demonstrate the power of photoswitching-enabled fluorescence imaging. Because synthetic photoswitchable probes can be much smaller, more versatile, and more efficient at high-performance modulation experiments, they provide a complement to photoswitchable fluorescent proteins. Although new challenges remain, we foresee a bright future for photoswitching-enabled imaging and detection.

Tuning aggregation of poly(3-hexylthiophene) within nanoparticles

Nanoparticles derived from π-conjugated polymers have gained widespread attention as active layer materials in various organic electronics applications. The optoelectronic, charge transfer, and charge transport properties of π-conjugated polymers are intimately connected to the polymer aggregate structure. Herein we show that the internal aggregate structure of regioregular poly(3-hexylthiophene) (P3HT) within polymer nanoparticles can be tuned by solvent composition during nanoparticle fabrication through the miniemulsion process. Using absorption spectra and single-NP photoluminescence decay properties, we show that a solvent mixture consisting of a low boiling good solvent and a high boiling marginal solvent results in polymer aggregate structure with a higher degree of uniformity and structural order. We find that the impact of solvent on the nature of P3HT aggregation within nanoparticles is different from what has been reported in thin films.

Oxidation-induced photoluminescence of conjugated polymers

Here, we report an unusual oxidation-induced photoluminescence (PL) turn-on response of a poly(3-alkoxythiophene), poly(3-{2-[2-(2-ethoxyethoxy)ethoxy]ethoxy}thiophene) (PEEEET). PEEEET shows a significantly red-shifted absorption spectrum compared to polyalkylthiophenes and is almost nonfluorescent (quantum yield ≪ 1%) in its pristine state. The introduction of sulfonyl defects along the polymer backbone by the oxidation of PEEEET with meta-chloroperbenzoic acid (m-CPBA) increased the emission quantum yield with the intensity increasing with the degree of oxidation. Molecular modeling data indicated that the oxidation-induced PL increase cannot be explained by the nature of monomer units and radiative rate changes. We attributed the enhanced fluorescence to the reduced nonradiative rate caused by the increased band gap, according to the energy gap law, which is consistent with the observed blue shifts in absorption and PL spectra accompanied by the PL increase.

The relative brightness of PEG lipid-conjugated polymer nanoparticles as fluid-phase markers in live cells

While conjugated polymer nanoparticles (CPNs) have been widely touted as ultra-bright labels for biological imaging, no direct comparative measurements of their intracellular brightness have been reported. Simple in vitro comparisons are not definitive since fluorophore brightness in vitro may not correspond with intracellular brightness. We have compared the fluorescence brightness of J774A.1 cells loaded with 24 nm methoxy-capped 2,000 M(r) polyethylene glycol lipid PFBT nanoparticles (PEG lipid-PFBT CPNs) to cells loaded with carboxy-functionalized quantum dots (Qdots) or a dextran-linked small molecule organic dye, Alexa Fluor 488 dextran (AF488-dex). Under conditions likely to be used for biological imaging or flow cytometry, these CPNs are 175× brighter than Qdots and 1,400× brighter than AF488-dex in cells. Evaluation of the minimum incubation concentration required for detection of nanoparticle fluorescence with a commercial flow cytometer indicated that the limit of detection for PEG lipid-PFBT CPNs was 19 pM (86 ppb), substantially lower than values obtained for Qdots (980 pM) or AF488-dex (11.2 nM). Investigation of the mechanism of cellular uptake of the three fluid-phase labels indicates that these particles are passively taken into macrophage cells via macropinocytosis without interaction with cell surface receptors, and ultimately localize in lysosomes. In addition, no cytotoxicity could be observed at any of the CPN concentrations tested. Together, these data suggest that these CPNs are appropriate and attractive candidates as fluid-phase markers with significantly greater fluorescence brightness than existing dyes or nanoparticles. We expect that these CPNs will find application in both imaging and flow cytometry.

A versatile method for generating semiconducting polymer dot nanocomposites

This paper describes a method, based on co-precipitation, for generating small semiconducting polymer dot (Pdot) nanocomposites, which contain either gold or iron oxide nanoparticles within the Pdot matrix. We demonstrate the utility of Pdot-Au nanoparticles (Au-NP-Pdots) in dual-modality imaging in which co-localization of fluorescence from Pdot and scattering from Au was used to identify Au-NP-Pdot probes for downstream single-particle tracking and cellular imaging. We also demonstrate the potential of employing Pdot-FeO(x) nanoparticles (FeO(x)-NP-Pdots) for both sample preparation, where cells tagged with FeO(x)-NP-Pdots were isolated using an external magnet, and cellular imaging and detection, owing to the intense fluorescence from Pdots. The method we present here should be generalizable to the formation of other Pdot nanocomposites for creating the next generation of multi-functional Pdot probes.

Multifunctional non-viral delivery systems based on conjugated polymers

Multifunctional nanomaterials with simultaneous therapeutic and imaging functions explore new strategies for the treatment of various diseases. Conjugated polymers (CPs) are considered as novel candidates to serve as multifunctional delivery systems due to their high fluorescence quantum yield, good photostability, and low cytotoxicity. Highly sensitive sensing and imaging properties of CPs are well reviewed, while the applications of CPs as delivery systems are rarely covered. This feature article mainly focuses on CP-based multifunctional non-viral delivery systems for drug, protein, gene, and cell delivery. Promising directions for the further development of CP-based delivery systems are also discussed.

Reversible photoswitching of spiropyran-conjugated semiconducting polymer dots

Semiconducting polymer dots (Pdots) recently have emerged as a new class of ultrabright fluorescent probes with promising applications in biological detection and imaging. We developed photoswitchable Pdots by conjugating photochromic spiropyran molecules onto poly[9,9-dioctylfluorenyl-2,7-diyl)-co-1,4-benzo-{2,1'-3}-thiadiazole)] (PFBT). The modulation of fluorescence was achieved by ultraviolet irradiation, which converted spiropyran into its visible-absorbing merocyanine form. The merocyanine efficiently quenched the fluorescence of PFBT via Förster resonance energy transfer (FRET). We then reversed the quenching by subsequent irradiation with visible light to get back the fluorescence of PFBT. This FRET-based photomodulation of Pdot fluorescence could be repeated multiple times. We next conjugated biomolecules onto the surface of these photoswitchable Pdots and demonstrated their specific cellular and subcellular labeling to different types of cells without any noticeable nonspecific binding. We anticipate these photoswitchable and biocompatible Pdots will be useful in developing bioimaging techniques in the future.

Highly emissive PEG-encapsulated conjugated polymer nanoparticles

A novel bioimaging probe based on a conjugated polymer, poly(9,9-dihexylfluorene-alt-2,1,3-benzoxadiazole) (PFBD), is demonstrated. Transfer of the hydrophobic polymer into water using a short chain poly(ethylene glycol) (PEG) resulted in conjugated polymer nanoparticles (PEG-PFBD) with a fluorescence quantum yield of 46%. The PEG-PFBD nanoparticles possessed several desirable structural and photophysical properties, such as colloidal stability in a broad range of pH values, sub-20 nm particle size, the presence of surface chemical functionality, as well as desirable excitation and emission spectra, for bioimaging applications. PEG-PFBD nanoparticles were conjugated with cyclic RGDfK targeting peptide for labeling of membrane α(V)β(3) integrin receptors on live HT-29 adenocarcinoma cells. Single nanoparticle microscopy revealed that the PEG-capped PFBD nanoparticles exhibit at least ten times higher emitted photon counts than single quantum dots (QD655) of comparable size. In addition, Fluorescence Lifetime Imaging Microscopy (FLIM) of single PEG-PFBD nanoparticles revealed that the nanoparticles display a clearly resolvable single nanoparticle fluorescence lifetime.

Enzymatic oxygen scavenging for photostability without pH drop in single-molecule experiments

Over the past years, bottom-up bionanotechnology has been developed as a promising tool for future technological applications. Many of these biomolecule-based assemblies are characterized using various single-molecule techniques that require strict anaerobic conditions. The most common oxygen scavengers for single-molecule experiments are glucose oxidase and catalase (GOC) or protocatechuate dioxygenase (PCD). One of the pitfalls of these systems, however, is the production of carboxylic acids. These acids can result in a significant pH drop over the course of experiments and must thus be compensated by an increased buffer strength. Here, we present pyranose oxidase and catalase (POC) as a novel enzymatic system to perform single-molecule experiments in pH-stable conditions at arbitrary buffer strength. We show that POC keeps the pH stable over hours, while GOC and PCD cause an increasing acidity of the buffer system. We further verify in single-molecule fluorescence experiments that POC performs as good as the common oxygen-scavenging systems, but offers long-term pH stability and more freedom in buffer conditions. This enhanced stability allows the observation of bionanotechnological assemblies in aqueous environments under well-defined conditions for an extended time.

Importance of having low-density functional groups for generating high-performance semiconducting polymer dots

Semiconducting polymers with low-density side-chain carboxylic acid groups were synthesized to form stable, functionalized, and highly fluorescent polymer dots (Pdots). The influence of the molar fraction of hydrophilic side-chains on Pdot properties and performance was systematically investigated. Our results show that the density of side-chain carboxylic acid groups significantly affects Pdot stability, internal structure, fluorescence brightness, and nonspecific binding in cellular labeling. Fluorescence spectroscopy, single-particle imaging, and a dye-doping method were employed to investigate the fluorescence brightness and the internal structure of the Pdots. The results of these experiments indicate that semiconducting polymers with low density of side-chain functional groups can form stable, compact, and highly bright Pdots as compared to those with high density of hydrophilic side-chains. The functionalized polymer dots were conjugated to streptavidin (SA) by carbodiimide-catalyzed coupling and the Pdot-SA probes effectively and specifically labeled the cancer cell-surface marker Her2 in human breast cancer cells. The carboxylate-functionalized polymer could also be covalently modified with small functional molecules to generate Pdot probes for click chemistry-based bio-orthogonal labeling. This study presents a promising approach for further developing functional Pdot probes for biological applications.

Hybrid semiconducting polymer dot-quantum dot with narrow-band emission, near-infrared fluorescence, and high brightness

This communication describes a new class of semiconducting polymer nanoparticle-quantum dot hybrid with high brightness, narrow emission, near-IR fluorescence, and excellent cellular targeting capability. Using this approach, we circumvented the current difficulty with obtaining narrow-band-emitting and near-IR-fluorescing semiconducting polymer nanoparticles while combining the advantages of both semiconducting polymer nanoparticles and quantum dots. We further demonstrated the use of this new class of hybrid nanomaterial for effective and specific cellular and subcellular labeling without any noticeable nonspecific binding. This hybrid nanomaterial is anticipated to find use in a variety of in vitro and in vivo biological applications.

Tracking of single charge carriers in a conjugated polymer nanoparticle

The motion of individual charge carriers in organic nanostructures was tracked by fluorescence microscopy. A twinkling effect is observed in fluorescence microscopy of single conjugated polymer nanoparticles, that is, small displacements in the fluorescence spot of single nanoparticles of the conjugated polymer PFBT are observed over time. There is evidence that superquenching by the charge carrier induces a dark spot in the nanoparticle, which moves with the carrier, resulting in the observed displacements in the fluorescence. Zero-field mobilities of individual charge carriers consistent with highly trapped polarons were obtained from tracking experiments.

Photosensitizer-doped conjugated polymer nanoparticles for simultaneous two-photon imaging and two-photon photodynamic therapy in living cells

Photosensitizer doped conjugated polymer nanoparticles have been prepared by incorporating polyoxyethylene nonylphenylether (CO-520) into the nanoparticles using a re-precipitation method. The conjugated polymer, poly[9,9-dibromohexylfluorene-2,7-ylenethylene-alt-1,4-(2,5-dimethoxy)phenylene] (PFEMO), was used as the host matrix to disperse tetraphenylporphyrin (TPP) and an energy donor to enhance the two-photon excitation properties of TPP. These CO-520 incorporated, TPP-doped PFEMO nanoparticles are stable and have low cytotoxicity in the dark. The TPP emission of the nanoparticles was found to be enhanced by about 20 times by PFEMO under two-photon excitation. The nanoparticles showed significantly enhanced two-photon excitation singlet oxygen generation efficiency and two-photon photodynamic therapy activity in cancer cells. These composite nanoparticles display features required for ideal photosensitizers, such as low cytotoxicity in the dark and efficient two-photon photodynamic activity under laser radiation. In addition, these novel nano-photosensitizers allow simultaneous in vivo monitoring by two-photon fluorescence imaging during two-photon photodynamic treatment. These photosensitizer-doped conjugated polymer nanoparticles can act as novel photosensitizing agents for two-photon photodynamic therapy and related applications.

Conjugated polyelectrolyte-cisplatin complex nanoparticles for simultaneous in vivo imaging and drug tracking

A molecular brush based on conjugated polyelectrolyte (CPE) grafted with dense poly(ethylene glycol) (PEG) chains was successfully complexed with an anticancer agent, cisplatin, to form cisplatin-loaded nanoparticles (CPE-PEG-Pt). The obtained nanoparticles have high far-red/near-infrared fluorescence and are able to release the drug in a continuous and slow manner. These nanoparticles have not only been used to visualize HepG2 cancer cells, but also served as an in vivo fluorescent imaging probe that simultaneously tracks the in vivo drug distribution in nude mice upon intravenous administration.

Photoswitchable water-soluble quantum dots: pcFRET based on amphiphilic photochromic polymer coating

A novel surface architecture was developed to generate biocompatible and stable photoswitchable quantum dots (psQDs). Photochromic diheteroarylethenes, which undergo thermally stable photoconversions between two forms with different spectral properties in organic solvents, were covalently linked to an amphiphilic polymer that self-assembles with the lipophilic chains surrounding commercial hydrophobic core-shell CdSe/ZnS QDs. This strategy creates a small (∼7 nm diameter) nanoparticle (NP) that is soluble in aqueous medium. The NP retains and even enhances the desirable properties of the original QD (broad excitation, narrow emission, photostability), but the brightness of its emission can be tailored by light. The modulation of emission monitored by steady-state and time-resolved fluorescence was 35-40%. The psQDs exhibit unprecedented photostability and fatigue resistance over at least 16 cycles of photoconversion.

Development of ultrabright semiconducting polymer dots for ratiometric pH sensing

Semiconducting polymer-based nanoparticles (Pdots) have recently emerged as a new class of ultrabright probes for biological detection and imaging. This paper describes the development of poly(2,5-di(3',7'-dimethyloctyl)phenylene-1,4-ethynylene) (PPE) Pdots as a platform for designing Förster resonance energy transfer (FRET)-based ratiometric pH nanoprobes. We describe and compare three routes for coupling the pH-sensitive dye, fluorescein, to PPE Pdots, which is a pH-insensitive semiconducting polymer. This approach offers a rapid and robust sensor for pH determination using the ratiometric methodology where excitation at a single wavelength results in two emission peaks, one that is pH sensitive and the other one that is pH insensitive for use as an internal reference. The linear range for pH sensing of the fluorescein-coupled Pdots is between pH 5.0 and 8.0, which is suitable for most cellular studies. The pH-sensitive Pdots show excellent reversibility and stability in pH measurements. In this paper, we use them to measure the intracellular pH in HeLa cells following their uptake by endocytosis, thus demonstrating their utility for use in cellular and imaging experiments.