Binder-free graphene oxide doughs

Graphene oxide (GO) sheets have been used to construct various bulk forms of GO and graphene-based materials through solution-based processing techniques. Here, we report a highly cohesive dough state of GO with tens of weight percent loading in water without binder-like additives. The dough state can be diluted to obtain gels or dispersions, and dried to yield hard solids. It can be kneaded without leaving stains, readily reshaped, connected, and further processed to make bulk GO and graphene materials of arbitrary form factors and tunable microstructures. The doughs can be transformed to dense glassy solids of GO or graphene without long-range stacking order of the sheets, which exhibit isotropic and much enhanced mechanical properties due to hindered sliding between the sheets. GO dough is also found to be a good support material for electrocatalysts as it helps to form compliant interface to access the active particles.

Graphene oxide (GO) dispersions may be used as starting materials for graphene-based architectures. Here, a malleable and versatile dough state of GO is discovered, completing the GO–water continuum, which can be diluted or converted to glassy GO or graphene solids without long-range stacking order with enhanced mechanical and electrochemical properties

Charge percolation in redox-active thin membrane hybrids of mesoporous silica and poly(viologens)

Charge transport via the electron-hopping mechanism was studied in redox-active films of mesoporous silica infiltrated by oligomeric and molecular viologens.

Gravure printing for mesoporous film preparation

This study presents gravure printing as a new strategy for rapid printing of ceramic mesoporous thin films and highlights its advantages over conventional mesoporous film preparation using evaporation induced self-assembly together with dip-coating.

Nanochannel-Confined Graphene Quantum Dots for Ultrasensitive Electrochemical Analysis of Complex Samples

Herein, we present an electrochemical sensing platform based on nanochannel-confined graphene quantum dots (GQDs) that is able to detect a spectrum of small analytes in complex samples with high sensitivity. Vertically ordered mesoporous silica-nanochannel film (VMSF) is decorated on the supporting electrode, conferring the electrode with excellent antifouling and anti-interference properties through steric exclusion and electrostatic repulsion. The synthesized GQDs with different functionalities are confined in the nanochannels of VMSF through electrophoresis, serving as the recognition element and signal amplifier. Without the usual need of tedious pretreatment, ultrasensitive and fast detection of Hg²⁺, Cu²⁺, and Cd²⁺ (with limits of detection (LOD) of 9.8 pM, 8.3 pM, and 4.3 nM, respectively) and dopamine (LOD of 120 nM) in complex food (Hg²⁺-contaminated seafood), environmental (soil-leaching solution), and biological (serum) samples are realized as proof-of-concept demonstrations.

Stable Voltage Cutoff Cycle Cathode with Tunable and Ordered Porous Structure for Li-O2 Batteries

Ordered porous RuO₂ materials with various pore structure parameters are prepared via a hard-template method and are used as the carbon-free cathodes for Li-O₂ batteries under the voltage cutoff cycle mode. The influences of pore structure parameters of porous RuO₂ on electrochemical performance are systematically studied. Results indicate that specific surface area and pore size determine the specific capacity and round-trip efficiency of Li-O₂ batteries. Too small pores cause pore blockage and hinder the diffusion pathways of Li⁺ and O₂ , thereby causing small specific capacity and high overpotentials. Too large pores weaken the mechanical property of porous RuO₂ , thereby causing the rapid decrease in capacity during electrochemical reaction. The Li-O₂ battery based on the RuO₂ cathode with an average pore size of 16 nm (RuO₂ -16) exhibits a high round-trip efficiency of ≈75.6% and an excellent cycling stability of up to 70 cycles at 100 mA g^-1 with a voltage window of 2.5-4.0 V. The superior performance of RuO₂ -16 can be attributed to its optimal pore structure parameters. Furthermore, the in situ differential electrochemical mass spectrometry test demonstrates that RuO₂ can effectively reduce parasitic reactions compared with carbon materials.

New insights into the structure-performance relationships of mesoporous materials in analytical science

Mesoporous materials are ideal carriers for guest molecules and they have been widely used in analytical science. The unique mesoporous structure provides special properties including large specific surface area, tunable pore size, and excellent pore connectivity. The structural properties of mesoporous materials have been largely made use of to improve the performance of analytical methods. For instance, the large specific surface area of mesoporous materials can provide abundant active sites and increase the probability of contact between analytes and active sites to produce stronger signals, thus leading to the improvement of detection sensitivity. The connections between analytical performances and the structural properties of mesoporous materials have not been discussed previously. Understanding the "structure-performance relationship" is highly important for the development of analytical methods with excellent performance based on mesoporous materials. In this review, we discuss the structural properties of mesoporous materials that can be optimized to improve the analytical performance. The discussion is divided into five sections according to the analytical performances: (i) selectivity-related structural properties, (ii) sensitivity-related structural properties, (iii) response time-related structural properties, (iv) stability-related structural properties, and (v) recovery time-related structural properties.

Microemulsion-Based One-Step Electrochemical Fabrication of Mesoporous Catalysts

Electrochemical technology has been proposed as an alternative or complementary method to classical inorganic synthesis for the fabrication of effective metallic solid catalysts. Microemulsion-based electrodeposition is a novel, fast, and one-step procedure to obtain mesoporous catalysts with extraordinarily effective areas, which can be used in heterogeneous catalysis for degradation of pollutants and clean energy production. The fabrication process involves conducting microemulsions containing ionic species (dissolved in aqueous solutions) as precursors of the metallic catalysts. The presence of nanometric droplets of organic or ionic-liquid components in the microemulsion defines the mesoporosity of the catalysts during a one-step electrodeposition process. This method also allows the fabrication of metal catalysts as supported mesoporous films or mesoporous nanowires with very high effective areas. Additionally, reactants have excellent accessibility to the overall surface of the catalysts. The different catalysts fabricated with the help of this technology have been tested for competitive degradation of organic pollutants and anodes' materials for fuel cell devices.

Micelle Structure in a Deep Eutectic Solvent for the Electrochemical Preparation of Nanomaterials

The self-aggregation of a surfactant in a deep eutectic solvent (DES) for electrodeposition is reported. The physical properties and electrochemical behavior of an anionic surfactant, sodium dodecyl sulfate (SDS), in a widely used DES, a choline chloride-urea mixture (ChCl-urea), were investigated. On the basis of surface tension and the conductivity measurements, the SDS micelles that were formed in the ChCl-urea system remained stable at higher temperatures, that is, 90 °C. Cyclic voltammetric and chronoamperometric data indicate that the addition of SDS to the DES may alter the nucleation and the growth processes that occur in the electrodeposition process. Scanning electron microscopy images show that the SDS adsorption prevents dendrite formation during the electrodeposition process. A simple mechanism for the formation of the SDS micelles in the DES system for electrodeposition is proposed.

Electrochemical Deposition: An Advanced Approach for Templated Synthesis of Nanoporous Metal Architectures

Well-constructed porous materials take an essential role in a wide range of applications, including energy conversion and storage systems, electrocatalysis, photocatalysis, and sensing. Although the tailored design of various nanoarchitectures has made substantial progress, simpler preparation methods are compelled to meet large-scale production requirements. Recently, advanced electrochemical deposition techniques have had a significant impact in terms of precise control upon the nanoporous architecture (i.e., pore size, surface area, pore structure, etc.), enabling access to a wide range of compositions. In this Account, we showcase the uniqueness of electrochemical deposition techniques, detail their implementation toward the synthesis of novel nanoporous metals, and finally outline the future research directions. Nanoporous metallic structures are attractive in that they can provide high surface area and large pore volume, easing mass transport of reactants and providing high accessibility to catalytically active metal surface. The great merit of the electrochemical deposition approach does not only lie in its versatility, being applicable to a wide range of compositions, but also in the nanoscale precision it affords when it comes to crystal growth control, which cannot be easily achieved by other bottom-up or top-down approaches. In this Account, we describe the significant progress made in the field of nanoporous metal designed through electrochemical deposition approaches using hard templates (i.e., porous silica, 3D templates of polymer and silica colloids) and soft templates (i.e., lyotropic liquid crystals, polymeric micelles). In addition, we will point out how it accounts for precise control over the crystal growth and describe the unique physical and chemical properties emerging from these novel materials. Up to date, our group has reported the synthesis of several nanoporous metals and alloys (e.g., Cu, Ru, Rh, Pd, Pt, Au, and their corresponding alloys) under various conditions through electrochemical deposition, while investigating their various potential applications. The orientation of the channel structure, the composition, and the nanoporosity can be easily controlled by selecting the appropriate surfactants or block copolymers. The inherent properties of the final product, such as framework crystallinity, catalytic activity, and resistance to oxidation, are depending on both the composition and pore structure, which in turn require suitable electrochemical conditions. This Account is divided into three main sections: (i) a history of electrochemical deposition using hard and soft templates, (ii) a description of the important mechanisms involved in the preparation of nanoporous materials, and (iii) a conclusion and future perspectives. We believe that this Account will promote a deeper understanding of the synthesis of nanoporous metals using electrochemical deposition methods, thus enabling new pathways to control nanoporous architectures and optimize their performance toward promising applications such as catalysis, energy storage, sensors, and so forth.

Supramolecular Switching of Ion-Transport in Nanochannels

Noncovalent approaches to achieve smart ion-transport regulation in artificial nanochannels have garnered significant interest in the recent years because of their advantages over conventional covalent routes. Herein, we demonstrate a simple and generic approach to control the surface charge in mesoporous silica nanochannels by employing π-electron-rich charged motifs (pyranine-based donors) to interact with the surface of mesoporous silica modified with π-electron-deficient motifs (viologen-based acceptors) through a range of noncovalent forces, namely, charge-transfer, electrostatic, and hydrophobic interactions. The extent of each of these interactions was independently controlled by molecular design and pH, while employing them in a synergistic or antagonistic fashion to modulate the binding affinity of the charged motifs. This enabled the precise control of the surface charge of the nanochannels to achieve multiple ion-transport states.

Self-assembled heteropolyacid on nitrogen-enriched carbon nanofiber for vanadium flow batteries

A novel polyoxometalate-based electrode was developed by incorporating phosphotungstic acid (PWA) in nylon-6,6 nanofiber, followed by carbonization. The developed PWA-carbon nanofiber (PWA-CNF) showed the characteristics of the dual-scale porosity of micro- and mesoporous substrate with surface area of around 684 m2 g-1. The compound exhibited excellent stability in vanadium electrolyte and battery cycling. Evaluation of electrocatalytic properties toward V2+/V3+ and VO2+/VO2+ redox couples indicated promising advantages in electron transfer kinetics and increasing energy efficiency, particularly for the VO2+/VO2+ couple. Moreover, the developed electrode exhibited substantially improved energy efficiency (14% higher than that of pristine carbon felt) in the single cell vanadium redox flow battery. This outstanding performance was attributed to high surface area and abundant oxygen-containing linkages in the developed electrode.

Highly Uniform Carbon Sheets with Orientation-Adjustable Ordered Mesopores

A soft-hard template-assisted method toward the unconventional free-standing ordered mesoporous carbon sheets (OMCSs) with uniform hexagonal morphology is developed by applying MgAl-layered double hydroxide (MgAl-LDH) as the hard template, triblock copolymer F127 as the soft template, and phenolic resols as the carbon sources. It is found that the surface of MgAl-LDH can induce the morphology variation of resol-F127 monomicelles, leading to the formation of vertically or horizontally aligned mesopore arrays in the OMCSs, which can in turn determine their electrochemical energy storage behaviors in supercapacitors with different configurations. In an all-solid-state supercapacitor with two face-to-face electrodes, an OMCS with vertical mesopores manifests the best performance among the samples. By contrast, in a micro-supercapacitor with in-plane film-like electrodes, an OMCS with horizontal mesopores delivers higher energy/power densities than the other OMCSs, which are also comparable to the state-of-the-art supercapacitors based on ordered mesoporous carbons. The achievement of uniform carbon sheets with orientation-adjustable mesopore arrays can help elucidate their electrochemical storage mechanism and allow the optimization of the performances according to the device configuration, thus providing a powerful tool for the manipulation of energy storage devices on the nanoscale.

Mesoporous Manganese Phosphonate Nanorods as a Prospective Anode for Lithium-Ion Batteries

Mesoporous materials can serve as well-performed electrode candidates for lithium-ion batteries (LIBs). Mesoporous manganese phosphonate (MnP) nanorods are composed of an interconnected network of pores that have high infiltration capacity for electrolyte and less tortuous transport pathways for lithium/electron charge carriers. The mesoporous architecture should also help alleviate stress from volume variation upon lithium intercalation/deintercalation cycles. We used MnP as an LIB anode and observed an initial reversible capacity of 420 mA h g^-1 and a modest Coulombic efficiency of 68.7% at a relatively high current density of 144 mA g^-1. The reversible capacity stabilizes at 253 mA h g^-1 after 100 repetitive cycles, while most of the time, the Coulombic efficiency remains around 100%. The results show that, as a prospective LIB anode, the mesoporous MnP can achieve desirable capacity with decent durability and rate capability.

Metal-Organic Framework-Derived Hollow Carbon Nanocubes for Fast Solid-Phase Microextraction of Polycyclic Aromatic Hydrocarbons

Developing novel coating materials for fast and sensitive solid-phase microextraction (SPME) is highly desired but few are achieved. In this work, a new material of metal-organic framework (MOF)-derived hollow carbon nanocubes (HCNCs) was prepared as a fiber coating material for SPME. The HCNC-coated fiber (denoted as HCNCs-F) exhibited a better enrichment performance than solid carbon nanocube (SCNC)-coated fiber (denoted as SCNCs-F) and commercial fibers based on the abundant active sites of the hollow structure, hydrophobic interactions, and π-π interactions. Moreover, because of the reduced mass-transport lengths of the hollow mesoporous structure, the HCNCs-F demonstrated a faster mass transfer compared with the SCNCs-F. The HCNCs-F was used to determine the six hydrophobic polycyclic aromatic hydrocarbons (PAHs) with wide linear ranges (10-2000 ng L^-1 for naphthalene and 5-2000 ng L^-1 for the other five analytes), good reproducibility (relative standard deviation < 8.8%), and low detection limits (0.03-0.70 ng L^-1). Finally, the HCNCs-F was successfully applied for the determination of PAHs from the real water samples. It can be concluded from the results that MOF-derived hollow carbon materials are promising candidates for the fast SPME and can be used for practical applications in analytical chemistry.

Mesoporous Silica Thin Films for Improved Electrochemical Detection of Paraquat

An electrochemical method was developed for rapid and sensitive detection of the herbicide paraquat in aqueous samples using mesoporous silica thin film modified glassy carbon electrodes (GCE). Vertically aligned mesoporous silica thin films were deposited onto GCE by electrochemically assisted self-assembly (EASA). Cyclic voltammetry revealed effective response to the cationic analyte (while rejecting anions) thanks to the charge selectivity exhibited by the negatively charged mesoporous channels. Square wave voltametry (SWV) was then used to detect paraquat via its one electron reduction process. Influence of various experimental parameters (i.e., pH, electrolyte concentration, and nature of electrolyte anions) on sensitivity was investigated and discussed with respect to the mesopore characteristics and accumulation efficiency, pointing out the key role of charge distribution in such confined spaces on these processes. Calibration plots for paraquat concentration ranging from 10 nM to 10 μM were constructed at mesoporous silica modified GCE which were linear with increasing paraquat concentration, showing dramatically enhanced sensitivity (almost 30 times) as compared to nonmodified electrodes. Finally, real samples from Meuse River (France) spiked with paraquat, without any pretreatment (except filtration), were analyzed by SWV, revealing the possible detection of paraquat at very low concentration (10-50 nM). Limit of detection (LOD) calculated from real sample analysis was found to be 12 nM, which is well below the permissible limits of paraquat in drinking water (40-400 nM) in various countries.

Nanostructured Electrochemical Biosensors for Label-Free Detection of Water- and Food-Borne Pathogens

The emergence of nanostructured materials has opened new horizons in the development of next generation biosensors. Being able to control the design of the electrode interface at the nanoscale combined with the intrinsic characteristics of the nanomaterials engenders novel biosensing platforms with improved capabilities. The purpose of this review is to provide a comprehensive and critical overview of the latest trends in emerging nanostructured electrochemical biosensors. A detailed description and discussion of recent approaches to construct label-free electrochemical nanostructured electrodes is given with special focus on pathogen detection for environmental monitoring and food safety. This includes the use of nanoscale materials such as nanotubes, nanowires, nanoparticles, and nanosheets as well as porous nanostructured materials including nanoporous anodic alumina, mesoporous silica, porous silicon, and polystyrene nanochannels. These platforms may pave the way toward the development of point-of-care portable electronic devices for applications ranging from environmental analysis to biomedical diagnostics.

Exploration of the Smallest Diameter Tin Nanowires Achievable with Electrodeposition: Sub 7 nm Sn Nanowires Produced by Electrodeposition from a Supercritical Fluid

Electrodeposition of Sn from supercritical difluoromethane has been performed into anodic alumina templates with pores down to 3 nm in diameter and into mesoporous silica templates with pores of diameter 1.5 nm. Optimized deposits have been characterized using X-ray diffraction, scanning electron microscopy, and scanning transmission electron microscopy (bright field, high-angle annular dark field, and energy-dispersive X-ray elemental mapping). Crystalline 13 nm diameter Sn nanowires have been electrodeposited in symmetric pore anodic alumina. Direct transmission electron microscopy evidence of sub 7 nm Sn nanowires in asymmetric anodic alumina has been obtained. These same measurements present indirect evidence for electrodeposition through 3 nm constrictions in the same templates. A detailed transmission electron microscopy study of mesoporous silica films after Sn deposition is presented. These indicate that it is possible to deposit Sn through the 1.5 nm pores in the mesoporous films, but that the nanowires formed are not stable. Suggestions of why this is the case and how such extreme nanowires could be stabilized are presented.

Multifunctional Bismuth Oxychloride/Mesoporous Silica Composites for Photocatalysis, Antibacterial Test, and Simultaneous Stripping Analysis of Heavy Metals

The increasing complexity of environmental pollution nowadays poses a severe threat to the public health, which attracts considerable attentions in searching for nanomaterials of multiproperty. In this study, mesoporous silica of KIT-6-encapsulated bismuth oxychloride (BiOCl), an intrinsically multifunctional material exhibiting bunched structure in the composites, are facilely prepared under hydrothermal conditions. Subsequently, the produced materials of multifunctionality were applied for photocatalysis, antibacterial test, and simultaneous determination of heavy metals including lead and cadmium. A combination of physiochemical characterizations have revealed that the BiOCl-KIT-6 composites exhibit enlarged yet refined surface morphology contributing to the improved photocatalytic ability with a band gap of 3.06 eV at a molecular ratio of 8Bi-Si. Moreover, the antibacterial activities of our BiOCl-KIT-6 composites were explored, and possible antimicrobial mechanism related to the production of reactive oxygen species was discussed. Furthermore, a sensitive electrochemical determination of heavy metals of lead and cadmium using square-wave anodic stripping voltammetry was also achieved. The composites-modified glassy carbon electrode displays a linear range of calibration curve from 0.2 to 300 μg/L with a detection limit of 0.05 μg/L (Pb2+) and 0.06 μg/L (Cd2+), respectively.

Ordered SiO2 cavity promoted formation of gold single crystal nanoparticles towards an efficient electrocatalytic application

A [111] facet dominated gold single crystal electrode with improved electrocatalytic ability for the oxidation of ethanol and nitrite.

Porous substrates as platforms for the nanostructuring of molecular magnets

This article highlights recent advances in the newly emerging field on the nanostructuration of molecular magnets using porous substrates.

Hierarchically porous graphene for batteries and supercapacitors

Hierarchical porous graphene based materials are explored for their application as electrochemical storage devices due to their large specific surface area, high electrical and thermal conductivity, and excellent specific capacity.

Morphology-Conserved Transformations of Metal-Based Precursors to Hierarchically Porous Micro-/Nanostructures for Electrochemical Energy Conversion and Storage

To meet future market demand, developing new structured materials for electrochemical energy conversion and storage systems is essential. Hierarchically porous micro-/nanostructures are favorable for designing such high-performance materials because of their unique features, including: i) the prevention of nanosized particle agglomeration and minimization of interfacial contact resistance, ii) more active sites and shorter ionic diffusion lengths because of their size compared with their large-size counterparts, iii) convenient electrolyte ingress and accommodation of large volume changes, and iv) enhanced light-scattering capability. Here, hierarchically porous micro-/nanostructures produced by morphology-conserved transformations of metal-based precursors are summarized, and their applications as electrodes and/or catalysts in rechargeable batteries, supercapacitors, and solar cells are discussed. Finally, research and development challenges relating to hierarchically porous micro-/nanostructures that must be overcome to increase their utilization in renewable energy applications are outlined.

Complex Nanostructures from Materials based on Metal-Organic Frameworks for Electrochemical Energy Storage and Conversion

Metal-organic frameworks (MOFs) have drawn tremendous attention because of their abundant diversity in structure and composition. Recently, there has been growing research interest in deriving advanced nanomaterials with complex architectures and tailored chemical compositions from MOF-based precursors for electrochemical energy storage and conversion. Here, a comprehensive overview of the synthesis and energy-related applications of complex nanostructures derived from MOF-based precursors is provided. After a brief summary of synthetic methods of MOF-based templates and their conversion to desirable nanostructures, delicate designs and preparation of complex architectures from MOFs or their composites are described in detail, including porous structures, single-shelled hollow structures, and multishelled hollow structures, as well as other unusual complex structures. Afterward, their applications are discussed as electrode materials or catalysts for lithium-ion batteries, hybrid supercapacitors, water-splitting devices, and fuel cells. Lastly, the research challenges and possible development directions of complex nanostructures derived from MOF-based-templates for electrochemical energy storage and conversion applications are outlined.

Yolk-Shell Polystyrene@Microporous Organic Network: A Smart Template with Thermally Disassemblable Yolk To Engineer Hollow MoS2/C Composites for High-Performance Supercapacitors

Yolk-shell-type polystyrene@microporous organic network (Y-PS@MON) materials were prepared by the Sonogashira coupling of tetra(4-ethynylphenyl)methane and 1,4-diiodobenzene on the surface of PS@SiO2 and by the etching of SiO2. The diameter of PS yolk spheres and the thickness of MON shells were 150 and ∼10 nm, respectively. The thickness of the void space between the PS yolk and the MON shell was ∼30 nm. Y-PS@MONs were used as templates for the synthesis of MoS2/C composite materials. Because of the microporosity of the MON shells and the void space between the yolk and the shell, MoS2 precursor compounds were efficiently incorporated into Y-PS@MONs. The heat treatment under argon resulted in the formation of hollow MoS2/C composites. The contents of MoS2 in the composites were systematically controlled by changing the amounts of precursor. MoS2/C with 58 wt % of MoS2 showed the best energy storage performance with a capacitance of 418 F/g at a 0.5 A/g current density as an electrode material of a coin cell supercapacitor, which is attributable to its hollow structure, high surface area, and the good distribution of the sliced MoS2 in the carbon matrix. Also, the MoS2/C-58 composite showed excellent retention of capacitances during 5000 cycles.

Optimisation of Surface-Initiated Photoiniferter-Mediated Polymerisation under Confinement, and the Formation of Block Copolymers in Mesoporous Films

Nature as the ultimate inspiration can direct, gate, and selectively transport species across channels to fulfil a specific targeted function. Harnessing such precision over local structure and functionality at the nanoscale is expected to lead to indispensable developments in synthetic channels for application in catalysis, filtration and sensing, and in drug delivery. By combining mesoporous materials with localised charge-switchable poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) brushes, precisely controlling pore filling and exploring the possibility of incorporating two different responsive polymers, we hope to approach the precision control of natural systems in the absence of an external force. Here, we report a simple one-step approach to prepare a mesoporous silica thin film with ~8 nm pores functionalised with a photoiniferter by combining sol⁻gel chemistry and evaporation-induced self-assembly (EISA). We show that surface-initiated photoiniferter-mediated polymerisation (SI-PIMP) allows the incorporation of a high polymer content up to geometrical pore blocking by the simple application of UV light in the presence of a monomer and solvent, proceeding in a controlled manner in pore sizes below 10 nm, with the potential to tune the material properties through the formation of surface-grafted block copolymers.

Fluorinated Mesoporous Silica Nanoparticles for Binuclear Probes in 1H and 19F Magnetic Resonance Imaging

The development of molecular and cellular magnetic resonance imaging (MRI) procedures has always represented a challenge because of the fact that conventional MRI contrast agents are not directly detected in vivo; in proton MRI (e.g., with the nucleus ¹H), their local concentration is measured through the effect they exert on the signal of hydrogen protons present in their immediate vicinity. Because the contrast effects generated by conventional MRI probes superpose to and can often impede the anatomical information contained in ¹H MRI images, new probes based on a nucleus other than ¹H, are being developed. In this study, we report on the development of fluorinated mesoporous silica nanoparticles (MSNs), which could represent an interesting dual probe that allows two MRI modes: ¹H for high-resolution anatomical information and ¹⁹F for the detection of MSNs used as drug delivery agents. MSNs were synthesized and covalently functionalized either with fluorosilane (FMSNs) or polyfluorosiloxane (polyFMSNs) to enable their detection in ¹⁹F MRI. Then, gadolinium chelates were grafted on the particles to enhance their detectability in ¹H MRI. The physicochemical, textural, and relaxometric properties (¹H and ¹⁹F relaxation times) of the nanoparticles were measured and compared. The ¹⁹F relaxation properties were found to be dependent on the concentration of fluorine; they were also highly sensitive to the presence of gadolinium. The shortest relaxation times were obtained with polyFMSNs. At clinical magnetic field strengths, high ¹H relaxivities and low relaxometric ratios (r₂/r₁ = 1.45; 2.2 for nanoparticles entrapped in hydrogel) were found for both nanoparticle systems. Finally, the visibility of both systems was confirmed in ¹H, and the detectability of polyFMSNs was confirmed in ¹⁹F MRI. This physicochemical and relaxometric study opens the door to the applications of fluorinated silica nanoparticles as theranostic materials allowing dual MRI (¹H and ¹⁹F).

Simultaneous Topography and Reaction Flux Mapping at and around Electrocatalytic Nanoparticles

The characterization of electrocatalytic reactions at individual nanoparticles (NPs) is presently of considerable interest but very challenging. Herein, we demonstrate how simple-to-fabricate nanopipette probes with diameters of approximately 30 nm can be deployed in a scanning ion conductance microscopy (SICM) platform to simultaneously visualize electrochemical reactivity and topography with high spatial resolution at electrochemical interfaces. By employing a self-referencing hopping mode protocol, whereby the probe is brought from bulk solution to the near-surface at each pixel, and with potential-time control applied at the substrate, current measurements at the nanopipette can be made with high precision and resolution (30 nm resolution, 2600 pixels μm^-2, <0.3 s pixel^-1) to reveal a wealth of information on the substrate physicochemical properties. This methodology has been applied to image the electrocatalytic oxidation of borohydride at ensembles of AuNPs on a carbon fiber support in alkaline media, whereby the depletion of hydroxide ions and release of water during the reaction results in a detectable change in the ionic composition around the NPs. Through the use of finite element method simulations, these observations are validated and analyzed to reveal important information on heterogeneities in ion flux between the top of a NP and the gap at the NP-support contact, diffusional overlap and competition for reactant between neighboring NPs, and differences in NP activity. These studies highlight key issues that influence the behavior of NP assemblies at the single NP level and provide a platform for the use of SICM as an important tool for electrocatalysis studies.

Electrochemical DNA sensors based on spatially distributed redox mediators: challenges and promises

DNA and aptasensors are widely used for fast and reliable detection of disease biomarkers, pharmaceuticals, toxins, metabolites and other species necessary for biomedical diagnostics. In the overview, the concept of spatially distributed redox mediators is considered with particular emphasis to the signal generation and biospecific layer assembling. The application of non-conductive polymers bearing redox labels, supramolecular carriers with attached DNA aptamers and redox active dyes and E-sensor concept are considered as examples of the approach announced.

Recent Trends on Electrochemical Sensors Based on Ordered Mesoporous Carbon

The past decade has seen an increasing number of extensive studies devoted to the exploitation of ordered mesoporous carbon (OMC) materials in electrochemistry, notably in the fields of energy and sensing. The present review summarizes the recent achievements made in field of electroanalysis using electrodes modified with such nanomaterials. On the basis of comprehensive tables, the interest in OMC for designing electrochemical sensors is illustrated through the various applications developed to date. They include voltammetric detection after preconcentration, electrocatalysis (intrinsically due to OMC or based on suitable catalysts deposited onto OMC), electrochemical biosensors, as well as electrochemiluminescence and potentiometric sensors.