Density Functional Computations and Molecular Dynamics Simulations of the Triethylammonium Triflate Protic Ionic Liquid

Systematic molecular dynamics simulations based on an empirical force field have been carried out for samples of triethylammonium trifluoromethanesulfonate (triethylammonium triflate, [TEA][Tf]), covering a wide temperature range 200 K ≤ T ≤ 400 K and analyzing a broad set of properties, from self-diffusion and electrical conductivity to rotational relaxation and hydrogen-bond dynamics. The study is motivated by recent quasi-elastic neutron scattering and differential scanning calorimetry measurements on the same system, revealing two successive first order transitions at T ≈ 230 and 310 K (on heating), as well as an intriguing and partly unexplained variety of subdiffusive motions of the acidic proton. Simulations show a weakly discontinuous transition at T = 310 K and highlight an anomaly at T = 260 K in the rotational relaxation of ions that we identify with the simulation analogue of the experimental transition at T = 230 K. Thus, simulations help identifying the nature of the experimental transitions, confirming that the highest temperature one corresponds to melting, while the one taking place at lower T is a transition from the crystal, stable at T ≤ 260 K, to a plastic phase (260 ≤ T ≤ 310 K), in which molecules are able to rotate without diffusing. Rotations, in particular, account for the subdiffusive motion seen at intermediate T both in the experiments and in the simulation. The structure, distribution, and strength of hydrogen bonds are investigated by molecular dynamics and by density functional computations. Clustering of ions of the same sign and the effect of contamination by water at 1% wgt concentration are discussed as well.

Ultrasonic Relaxation Spectra for Pyrrolidinium Bis(trifluoromethylsulfonyl)imides: A Comparison with Imidazolium Bis(trifluoromethylsulfonyl)imides

Ultrasound absorption spectra within the frequency range 10-300 MHz were determined for 1-propyl- and 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imides at ambient pressure and at temperatures in the ranges 293.15-313.15 and 293.15-323.15 K, respectively. For both compounds, a single Debye model (relaxation times between 0.451 and 0.778 ns) thoroughly describes the observed ultrasound absorption spectra in the investigated ranges. The spectra resemble those observed for imidazolium-based ionic liquids with the same anion. The ultrasound relaxation is dependent on the alkyl chain length of pyrrolidinium ring. In comparison to adequate imidazolium-based bis(trifluoromethylsulfonyl)imides, the relaxation in pyrrolidinium-based bis(trifluoromethylsulfonyl)imides is stronger; the pyrrolidinium cation causes clearly greater absorption than the imidazolium cation. Also, estimated ultrasound velocity dispersion is stronger in the case of pyrrolidinium imides in comparison to imidazolium imides. In turn, comparison of the ultrasonic data and literature data for the dielectric spectra exemplified for the 1-butyl- side chain in the cation indicates strong coupling in the case of imidazolium ring and weak coupling in the case of pyrrolidinium ring. The effect of absorption on the speed of sound is also discussed.

Ionic liquid and nanoparticle hybrid systems: Emerging applications

Having novel electronic and optical properties that emanate from their nano-scale dimensions, nanoparticles are central to numerous applications. Ionic liquids can confer to nanoparticle chemical protection and physicochemical property enhancement through intermolecular interactions and can consequently improve the stability and reusability of nanoparticle for various operations. With an aim to combine the novel properties of nanoparticles and ionic liquids, different structures have been generated, based on a balance of several intermolecular interactions. Such ionic liquid and nanoparticle hybrids are showing great potential in diverse applications. In this review, we first introduce various types of ionic liquid and nanoparticle hybrids, including nanoparticle colloidal dispersions in ionic liquids, ionic liquid-grafted nanoparticles, and nanoparticle-stabilized ionic liquid-based emulsions. Such hybrid materials exhibit interesting synergisms. We then highlight representative applications of ionic liquid and nanoparticle hybrids in the catalysis, electrochemistry and separations fields. Such hybrids can attain better stability and higher efficiency under a broad range of conditions. Novel and enhanced performance can be achieved in these applications by combining desired properties of ionic liquids and of nanoparticles within an appropriate hybrid nanostructure.

Vibrational Spectroscopy of Ionic Liquids

Vibrational spectroscopy has continued use as a powerful tool to characterize ionic liquids since the literature on room temperature molten salts experienced the rapid increase in number of publications in the 1990's. In the past years, infrared (IR) and Raman spectroscopies have provided insights on ionic interactions and the resulting liquid structure in ionic liquids. A large body of information is now available concerning vibrational spectra of ionic liquids made of many different combinations of anions and cations, but reviews on this literature are scarce. This review is an attempt at filling this gap. Some basic care needed while recording IR or Raman spectra of ionic liquids is explained. We have reviewed the conceptual basis of theoretical frameworks which have been used to interpret vibrational spectra of ionic liquids, helping the reader to distinguish the scope of application of different methods of calculation. Vibrational frequencies observed in IR and Raman spectra of ionic liquids based on different anions and cations are discussed and eventual disagreements between different sources are critically reviewed. The aim is that the reader can use this information while assigning vibrational spectra of an ionic liquid containing another particular combination of anions and cations. Different applications of IR and Raman spectroscopies are given for both pure ionic liquids and solutions. Further issues addressed in this review are the intermolecular vibrations that are more directly probed by the low-frequency range of IR and Raman spectra and the applications of vibrational spectroscopy in studying phase transitions of ionic liquids.

Proof of ion-pair structures in ammonium-based protic ionic liquids using combined NMR and DFT/PCM-based chemical shift calculations

The self-assembly of triethylammonium bis(trifluoromethylsulfonyl)imide, i.e. [(C₂H₅)₃NH][TFSI], in chloroform and aqueous solutions has been investigated using ¹H NMR spectroscopy and computational (DFT/PCM prediction) methods.

Investigation of 1,2,3-trialkylimidazolium ionic liquids: experiment and density functional theory calculations

Physico-chemical properties, thermal stability and bonding in 1,2,3-trialkylimidazolium based ionic liquids (ILs) were investigated by viscosity and density measurements together with thermogravimetric analysis (TGA) and IR spectroscopy.

Far infrared spectroscopy of hydrogen bonding collective motions in complex molecular systems

Far infrared spectroscopy as a tool for the study of inter and intramolecular interactions in complex molecular structures.

Controlling the kinetic and thermodynamic stability of cationic clusters by the addition of molecules or counterions

We discuss the stability of cationic clusters when adding molecules or counterions, and predict their occurrence in gas phase experiments.

Influence of Polar Organic Solvents in an Ionic Liquid Containing Lithium Bis(fluorosulfonyl)amide: Effect on the Cation-Anion Interaction, Lithium Ion Battery Performance, and Solid Electrolyte Interphase

Ionic liquid-organic solvent mixtures have recently been investigated as potential battery electrolytes. However, contradictory results with these mixtures have been shown for battery performance. In this manuscript, we studied the influence of the addition of polar organic solvents into the ionic liquid electrolyte 1 M lithium bis(fluorosulfonyl)amide (LiFSI)-1-butyl-1-methylpyrrolidinium bis(fluorosulfonyl)amide ([Py_1,4]FSI) and tested it for lithium ion battery applications. From infrared and Raman spectroscopy, clear changes in the lithium solvation and cation-anion interactions in the ionic liquid were observed on addition of organic solvents. From the lithiation/delithiation studies on electrodeposited Ge, the storage capacity for the ionic liquid-highly polar organic solvent (acetonitrile) mixture was found to be the highest at low C-rates (0.425 C) compared to using an ionic liquid alone and ionic liquid-less polar solvent (dimethyl carbonate) mixtures. Furthermore, XPS and AFM were used to evaluate the solid electrolyte interphase (SEI) and to correlate its stability with Li storage capacity.

Factors influencing the formation of polybromide monoanions in solutions of ionic liquid bromide salts

Six different bromide salts - tetraethylammonium bromide ([N2,2,2,2]Br, Br), 1-ethyl-1-methylpiperidinium bromide ([C2MPip]Br, Br), 1-ethyl-1-methylpyrrolidinium bromide ([C2MPyrr]Br, Br), 1-ethyl-3-methylimidazolium bromide ([C2MIm]Br, Br), 1-ethylpyridinium bromide ([C2Py]Br, Br), and 1-(2-hydroxyethyl)pyridinium bromide ([C2OHPy]Br, Br) - were studied in regards to their capacity to form polybromide monoanion products on addition of molecular bromine in acetonitrile solutions. Using complementary spectroscopic and computational methods for the examination of tribromide and pentabromide anion formation, key factors influencing polybromide sequestration were identified. Here, we present criteria for the targeted synthesis of highly efficient bromine sequestration agents.

Modern ab initio valence bond theory calculations reveal charge shift bonding in protic ionic liquids

The nature of bonding interactions between the cation and the anion of an ionic liquid is at the heart of understanding ionic liquid properties. A particularly interesting case is a special class of ionic liquids known as protic ionic liquids. The extent of proton transfer in protic ionic liquids has been observed to vary according to the interacting species. Back proton transfer renders protic ionic liquids volatile and to be considered as inferior ionic liquids. We try to address this issue by employing modern ab initio valence bond theory calculations. The results indicate that the bonding in the cation and the anion of a prototypical ionic liquid, ethylammonium nitrate, is fundamentally different. It is neither characteristic of covalent/polar covalent bonding nor ionic bonding but rather charge shift bonding as a resonance hybrid of two competing ionic molecular electronic structure configurations. An investigation of other analogous protic ionic liquids reveals that this charge shift bonding seems to be a typical characteristic of protic ionic liquids while the ionic solid analogue compound ammonium nitrate has less charge shift bonding character as compared to protic ionic liquids. Further the extent of charge shift bonding character has been found to be congruent with the trends in many physicochemical properties such as melting point, conductivity, viscosity, and ionicity of the studied ionic liquids indicating that percentage charge shift character may serve as a key descriptor for large scale computational screening of ionic liquids with desired properties.

Understanding the hydrogen bonds in ionic liquids and their roles in properties and reactions

Ionic liquids (ILs) have many potential applications in the chemical industry. In order to understand ILs, their molecular details have been extensively investigated. Intuitively, electrostatic forces are solely important in ILs. However, experiments and calculations have provided strong evidence for the existence of H-bonds in ILs and their roles in the properties and applications of ILs. As a structure-directing force, H-bonds are responsible for ionic pairing, stacking and self-assembling. Their geometric structure, interaction energy and electronic configuration in the ion-pairs of imidazolium-based ILs and protic ionic liquids (PILs) show a great number of differences compared to conventional H-bonds. In particular, their cooperation with electrostatic, dispersion and π interactions embodies the physical nature of H-bonds in ILs, which anomalously influences their properties, leading to a decrease in their melting points and viscosities and thus fluidizing them. Using ILs as catalysts and solvents, many reactions can be activated by the presence of H-bonds, which reduce the reaction barriers and stabilize the transition states. In the dissolution of lignocellulosic biomass by ILs, H-bonds exhibit a most important role in disrupting the H-bonding network of cellulose and controlling microscopic ordering into domains. In this article, a critical review is presented regarding the structural features of H-bonds in ILs and PILs, the correlation between H-bonds and the properties of ILs, and the roles of H-bonds in typical reactions.

Water bridges anchored by a C–H⋯O hydrogen bond: the role of weak interactions in molecular solvation

Hydrogen-bonded water bridges are re-directed from a polar NH bond to a weakly activated C(2)–H bond upon N-methylation. Infrared spectra, supported by ab initio calculations, provide direct evidence of the role of the C(2)–H donor in the solvation of the imidazole ring.

Alcohols as molecular probes in ionic liquids: evidence for nanostructuration

A comprehensive study of the solution and solvation of linear alcohols (propan-1-ol, butan-1-ol and pentan-1-ol) in ionic liquids (ILs) is presented.

Doubly ionic hydrogen bond interactions within the choline chloride–urea deep eutectic solvent

Computational analysis indicates flexibility and diversity in the hydrogen bonding, but limited charge delocalisation, within the choline chloride–urea eutectic.

Interaction between ionic liquid cation and water: infrared predissociation study of [bmim]+·(H2O)n clusters

The infrared predissociation spectra of [bmim]⁺·(H₂O)_n, n = 1–8, in the 2800–3800 cm⁻¹ region are presented and analyzed with the help of electronic structure calculations.

Thermodynamic screening of lignin dissolution in 1-butyl-3-methylimidazolium acetate–water mixtures

Lignin dissolution in [C₄mim]OAc–water mixtures is an exothermal process. Adding water facilitates the mixtures to reach thermodynamic stable state.

Deuteron quadrupole coupling constants and reorientational correlation times in protic ionic liquids

We describe a method for the accurate determination of deuteron quadrupole coupling constants and reorientational correlation times in protic ionic liquids by means of NMR relaxations time experiments, DFT-calculations and molecular dynamics simulations.

Cation-cation clusters in ionic liquids: Cooperative hydrogen bonding overcomes like-charge repulsion

Direct spectroscopic evidence for H-bonding between like-charged ions is reported for the ionic liquid, 1-(2-hydroxyethyl)-3-methylimidazolium tetrafluoroborate. New infrared bands in the OH frequency range appear at low temperatures indicating the formation of H-bonded cation-cation clusters similar to those known for water and alcohols. Supported by DFT calculations, these vibrational bands can be assigned to attractive interaction between the hydroxyl groups of the cations. The repulsive Coulomb interaction is overcome by cooperative hydrogen bonding between ions of like charge. The transition energy from purely cation-anion interacting configurations to those including cation-cation H-bonds is determined to be 3-4 kJmol(-1). The experimental findings and DFT calculations strongly support the concept of anti-electrostatic hydrogen bonds (AEHBs) as recently suggested by Weinhold and Klein. The like-charge configurations are kinetically stabilized with decreasing temperatures.

Ionic Liquids with Weakly Coordinating [M(III)(OR(F))4](-) Anions

Ionic liquids (ILs) are defined as salts with melting points below 100 °C. They attracted much attention in the last two decades due to their unique set of properties, including high conductivities, low viscosities, negligible vapor pressure, and high electrochemical resistance. ILs are seen as tunable systems, of which (also in mixtures) up to 10(19) combinations may exist. These properties make ILs interesting candidates for a variety of fundamental to industrial applications. Our addition to this field was weakly coordinating, little interacting anions, the highly fluorinated aluminates [Al(OR(F))4](-) (R(F) = C(CF3)3, C(CH3), (CF3)2, and CH(CF3)2 and later also CH2(CF3)). We have used these anions in a broad spectrum of applications, including the stabilization of reactive cations, (polymerization) catalysis, and conducting salts for cyclic voltammetry or in electrochemical cells. Especially the [Al(Ohfip)4](-) (hfip = CH(CF3)2) anions in combination with asymmetric organic cations turned out to be very well suited for the synthesis of ILs with very low melting points, some even far below 0 °C. Also the analogous borates, [B(OR(F))4](-), were shown to yield ILs, and currently a plethora of such aluminate and borate ILs have been synthesized and thoroughly investigated. In many aspects, at least the [Al(Ohfip)4](-) ILs present almost ideally noninteracting prototype ILs with (nearly) isotropic but weak and flat Coulomb potential. Consequently, their overall interionic interactions are significantly reduced compared with other classes of ILs, resulting in an extraordinarily low degree, or (for short cation chain lengths below six) even complete absence of ion pairing. From thorough analysis of the principles governing the physical properties of this highly fluorinated IL class with minimized interactions, we were able to learn basic principles that could be extended, for example, to the prediction of the principal properties of a wide variety of typical ILs. In this Account, we give a comprehensive review of their syntheses, thermal and toxicological behavior, physical as well as dynamic properties, and use in electrochemical applications. We delineate advantages and limitations of the [M(III)(OR(F))4](-) ILs developed in our lab and give an outlook on those fields, in which there is still a lack of knowledge.

Thermal Stability Limits of Imidazolium Ionic Liquids Immobilized on Metal-Oxides

Thermal stability limits of 33 imidazolium ionic liquids (ILs) immobilized on three of the most commonly used high surface area metal-oxides, SiO2, γ-Al2O3, and MgO, were investigated. ILs were chosen from a family of 13 cations and 18 anions. Results show that the acidity of C2H of an imidazolium ring is one of the key factors controlling the thermal stability. An increase in C2H bonding strength of ILs leads to an increase in their stability limits accompanied by a decrease in interionic energy. Systematic changes in IL structure, such as changes in electronic structure and size of anion/cation, methylation on C2 site, and substitution of alkyl groups on the imidazolium ring with functional groups have significant effects on thermal stability limits. Furthermore, thermal stability limits of ILs are influenced strongly by acidic character of the metal-oxide surface. Generally, as the point of zero charge (PZC) of the metal-oxide increases from SiO2 to MgO, the interactions of IL and metal-oxide dominate over interionic interactions, and metal-oxide becomes the significant factor controlling the stability limits. However, thermal stability limits of some ILs show the opposite trend, as the chemical activities of the cation functional group or the electron donating properties of the anion alter IL/metal-oxide interactions. Results presented here can help in choosing the most suitable ILs for materials involving ILs supported on metal-oxides, such as for supported ionic liquid membranes (SILM) in separation applications or for solid catalyst with ionic liquid layer (SCILL) and supported ionic liquid phase (SILP) catalysts in catalysis.