Suppressor capacity of copper nanoparticles biosynthesized using Crocus sativus L. leaf aqueous extract on methadone-induced cell death in adrenal phaeochromocytoma (PC12) cell line

In this research, we prepared and formulated a neuroprotective supplement (copper nanoparticles in aqueous medium utilizing Crocus sativus L. Leaf aqueous extract) for determining its potential against methadone-induced cell death in PC12. The results of chemical characterization tests i.e., FE-SEM, FT-IR, XRD, EDX, TEM, and UV–Vis spectroscopy revealed that the study showed that copper nanoparticles were synthesized in the perfect way possible. In the TEM and FE-SEM images, the copper nanoparticles were in the mean size of 27.5 nm with the spherical shape. In the biological part of the present research, the Rat inflammatory cytokine assay kit was used to measure the concentrations of inflammatory cytokines. Terminal deoxynucleotidyl transferase dUTP nick end labeling (TUNEL) test was used to show DNA fragmentation and apoptosis. Caspase-3 activity was assessed by the caspase activity colorimetric assay kit and mitochondrial membrane potential was studied by Rhodamine123 fluorescence dye. Also, the cell viability of PC12 was measured by trypan blue assay. Copper nanoparticles-treated cell cutlers significantly (p ≤ 0.01) decreased the inflammatory cytokines concentrations, caspase-3 activity, and DNA fragmentation and they raised the cell viability and mitochondrial membrane potential in the high concentration of methadone-treated PC12 cells. The best result of neuroprotective properties was seen in the high dose of copper nanoparticles i.e., 4 µg. According to the above results, copper nanoparticles containing C. sativus leaf aqueous extract can be used in peripheral nervous system treatment as a neuroprotective promoter and central nervous system after approving in the clinical trial studies in humans.

Glucose Oxidase/Nano-ZnO/Thin Film Deposit FTO as an Innovative Clinical Transducer: A Sensitive Glucose Biosensor

In the present research, a new biocompatible electrode is proposed as a rapid and direct glucose biosensing technique that improves on the deficiencies of fast clinical devices in laboratory investigations. Nano-ZnO (nanostructured zinc oxide) was sputtered by reactive direct current magnetron sputtering system on a precovered fluorinated tin oxide (FTO) conductive layer. Spin-coated polyvinyl alcohol (PVA) at optimized instrumental deposition conditions was applied to prepare the effective medium for glucose oxidase enzyme (GOx) covalent immobilization through cyanuric chloride (GOx/nano-ZnO/PVA/FTO). The electrochemical behavior of glucose on the fabricated GOx/nano-ZnO/PVA/FTO biosensor was investigated by I-V techniques. In addition, field emission scanning electron microscopy and electrochemical impedance spectroscopy were applied to assess the morphology of the modified electrode surface. The I-V results indicated good sensitivity for glucose detection (0.041 mA per mM) within 0.2-20 mM and the limit of detection was 2.0 μM. We believe that such biodevices have good potential for tracing a number of biocompounds in biological fluids along with excellent accuracy, selectivity, and precise analysis. The fast response time of the fabricated GOx/nano-ZnO/PVA/FTO biosensor (less than 3 s) could allow most types of real-time analysis.

Carbon-based ruthenium nanomaterial-based electroanalytical sensors for the detection of anticancer drug Idarubicin

In this work, a novel nanosensing platform was suggested based on ruthenium for the sensitive determination of Idarubicin anticancer drugs. Ruthenium/Vulcan carbon-based nanoparticles were synthesized ultrasonication method and then characterized by transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD). The mean particle size of the nanoparticles calculated by the TEM analysis was found to be 1.98 nm ± 0.29 nm, and the Ru nanoparticles were mostly dispersed on the support material. Glassy carbon electrode (GCE) surface was modified with Ruthenium/Vulcan carbon-based nanomaterials (Ru@VC), and characterization of the nanosensor was performed using electrochemical impedance spectroscopy and cyclic voltammetry. The limit of detection (LOD) and limit of quantification (LOQ) values were found as 9.25 × 10^–9 M and 2.8 × 10^–8 M in buffer samples. To demonstrate the applicability and validity of developed nanosensor, it was used for the determination of Idarubicin in Idamen^® IV (10 mg/10 mL vial) and human serum sample. The results of recovery studies showed that the Ru@VC/GCE nanosensor was free from excipient interferences in the dosage forms of injection, and it can be successfully applied to biological samples.

DNA based biosensing of Acinetobacter baumannii using nanoparticles aggregation method

Acinetobacter baumannii is the main cause of nosocomial infections in blood, urinary tract, wounds and in lungs leading to pneumonia. Apart from its strong predilection to be the cause of serious illnesses in intensive care units. Herein, we present a specific and sensitive approach for the monitoring of Acinetobacter baumannii genome based on citrate capped silver nanoparticles (Cit-AgNPs) using spectroscopic methods. In this study, (5' SH-TTG TGA ACT ATT TAC GTC AGC ATG C3') sequence was used as a probe DNA (pDNA) of Acinetobacter baumannii. Then, complementary DNA (cDNA) was used for hybridization. After the hybridization of pDNA with cDNA, target DNA (5' GCA TGC TGA CGT AAA TAGTTC ACA A 3') was recognized and detected using turn-on fluorescence bioassay. After the hybridization of pDNA with cDNA, the target DNA was successfully measured in optimum time of 2 min by spectrophotometric techniques. Moreover, the selectivity of designed bioassay was evaluated in the presence of two mismatch sequences and excellent differentiation was obtained. 1 Zepto-molar (zM) of low limit of quantification (LLOQ) was achieved by this genosensor. The present study paved the way for quick (2 min) and accurate detection of Acinetobacter baumannii, which can be a good alternative to the traditional methods. Current study proposed a novel and significant diagnostic test towards Acinetobacter baumannii detection based on silver nanoparticles aggregation which has the capability of being a good alternative to the traditional methods. Moreover, the proposed genosensor successfully could be applied for the detection of other pathogens.

Ultrasensitive electroanalytical sulfisoxazole sensors amplified with Pd-doped ZnO nanoparticles and modified with 1-hexyl-3-methyl imidazolium bis(trifluoromethylsulfonyl)imide

In this study, an electrochemical sensor has been introduced by incorporating Pd-doped ZnO nanoparticles (ZnO–Pd/NPs) into a carbon paste (CP) matrix amplified by a conductive binder (1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (1H3MIBTMSI), in this case) to determine the concentration of the sulfisoxazole (SFX) drug in urine, tablet, and pharmaceutical wastewater samples.

Electrochemical Sensors, a Bright Future in the Fabrication of Portable Kits in Analytical Systems

Analysis of food, pharmaceutical, and environmental compounds is an inevitable issue to evaluate quality of the compounds used in human life. Quality of drinking water, food products, and pharmaceutical compounds is directly associated with human health. Presence of forbidden additives in food products, toxic compounds in water samples and drugs with low quality lead to important problems for human health. Therefore, attention to analytical strategy for investigation of quality of food, pharmaceutical, and environmental compounds and monitoring presence of forbidden compounds in materials used by humans has increased in recent years. Analytical methods help to identify and quantify both permissible and unauthorized compounds present in the materials used in human daily life. Among analytical methods, electrochemical methods have been shown to have more advantages compared to other analytical methods due to their portability and low cost. Most of big companies have applied this type of analytical methods because of their fast and selective analysis. Due to simple operation and high diversity of electroanalytical sensors, these types of sensors are expected to be the future generation of analytical systems. Therefore, many scientists and researchers have focused on designing and fabrication of electroanalytical sensors with good selectivity and high sensitivity for different types of compounds such as drugs, food, and environmental pollutants. In this paper, we described the mechanism and different examples of DNA, enzymatic and electro-catalytic methods for electroanalytical determination of drug, food and environmental compounds.

Toxicity comparison of three imidazolium bromide ionic liquids to soil microorganisms

Ionic liquids (ILs) are extensively used in several chemistry fields. And research about the effects of ILs on soil microbes is needed. In this study, brown soil was exposed to 1-butyl-3-methylimidazolium bromide ([C₄mim]Br), 1-hexyl-3-methylimidazolium bromide ([C₆mim]Br) and 1-decyl-3-methylimidazolium bromide ([C₁₀mim]Br). The toxicities of the three ILs are evaluated by measuring the soil culturable microbial number, enzyme activity, microbial diversity and, abundance of the ammonia monooxygenase (amoA) genes of ammonia-oxidizing bacteria (AOB) and ammonia-oxidizing archaea (AOA). Results showed that all tested ILs caused a decrease in culturable microbial abundance. Tested ILs exposure inhibit urease activity and promote acid phosphatase and β-glucosidase activities. Tested ILs reduced soil microbial diversity and the abundances of AOB-amoA and AOA-amoA genes significantly. After a comparison of the integrated biomarker response (IBR) index, the toxicities of tested ILs to soil microorganisms were as follows: [C₁₀mim]Br > [C₆mim]Br > [C₄mim]Br. Among all collected biomarkers, the abundance of the AOA-amoA gene was the most sensitive one and was easily affected after ILs exposure.

Electrochemical sensors for improved detection of paraquat in food samples: A review

Paraquat (1,10-dimethyl-4,40-dipyridinium chloride), also known as methyl viologen, is widely used as a quaternary ammonium herbicide (broadleaf weed killer) all over the world owing to its excellent effect in plant cells for crop protection and horticultural use. However, it is dangerous because of its high acute toxicity even at low concentrations. Its detection in the environment is therefore necessary. As a consequence of its widespread usage, it causes genotoxic, teratogenic as well as other environmental and ecological adverse impacts. Exposure to PQ leads to a high mortality rate because no specific drug is effective for treatment. Excessive consumption of PQ can cause cellular damage and necrosis in the brain, heart, lungs, liver, and kidneys. The diversity and sensitivity of the analyses currently required have forced the experimenter to use more advanced and efficient techniques, which can provide qualitative and quantitative results in complex environments. Electrochemical methods generally meet these criteria while offering other advantages to achieve excellent accuracy and fast handling. This paper provides an overview of the determination of PQ using electrochemical methods combined with several modified electrodes in food samples, including milk, apple juice, tomato juice, and potato juice. Emphasis was placed on the most relevant modifiers used to generate high selectivity and sensitivity such as noble metals, metallic nanoparticles, polymers, biomolecules, clay, and apatite minerals. Comprehensively, it is strongly convincing that the synergy between the sensor substrate and the modifier architecture gives the electrodes a high capacity to detect paraquat in complex matrices such as food. In line with the context, information's on the mechanism of electrooxidation or reduction of PQ has been reported with the discussion of some future prospects and some insights. To the best of our knowledge, there is no review article relating the electrochemical determination of paraquat.

Hierarchical multi-layered molybdenum carbide encapsulated oxidized carbon nanofiber for selective electrochemical detection of antimicrobial agents: inter-connected path in multi-layered structure for efficient electron transfer

The schematic illustration for electrochemical sensing of MTZ at Mo₂/C/f-CNF modified GCE.