Electron conduction in molecular wires. I. A scattering formalism

Electron transport in open systems from finite-size calculations: Examination of the principal layer method applied to linear gold chains

We describe the occurrence of computational artifacts when the principal layer method is used in combination with the cluster approximation for the calculation of electronic transport properties of nanostructures. For a one-dimensional gold chain, we observe an unphysical band in the band structure. The artificial band persists for large principal layers and for large buffer sizes. We demonstrate that the assumption of equality between Hamiltonian elements of neighboring layers is no longer valid and that a discontinuity is introduced in the potential at the layer transition. The effect depends on the basis set. When periodic boundary conditions are imposed and the k-space sampling is converged, the discontinuity disappears and the principal layer method can be correctly applied by using a linear combination of atomic orbitals as basis set.

STRANGE EFFECT OF DISORDER ON ELECTRON TRANSPORT THROUGH A THIN FILM

A novel feature of electron transport is explored through a thin film of varying impurity density with the distance from its surface. The film, attached to two metallic electrodes, is described by simple tight-binding model and its coupling to the electrodes is treated through Newns–Anderson chemisorption theory. It is observed that in the strong disorder regime the amplitude of the current passing through the film increases with the increase of the disorder strength, while it decreases in the weak disorder regime. This anomalous behavior is completely opposite to that of conventional disordered systems. Our results also predict that the electron transport is significantly influenced by the finite size of the thin film.

Temperature sensing using individual single-walled carbon nanotubes

Molecular dynamics simulations and quantum transport theory are employed to study the temperature-dependent electrical properties of individual (12,0) zigzag and (5,5) armchair carbon nanotubes deposited on silicon substrates. The results demonstrate that the magnitude of the leakage current depends on the length of the nanotube. Furthermore, the leakage current is generated periodically along the length of the nanotube. Finally, the results indicate that given an appropriate value of the applied bias voltage, the induced current varies linearly with the temperature over specific temperature ranges. As a result, the temperature can be inversely derived from the measured current signal. Overall, the results show that the (12,0) zigzag and (5,5) armchair carbon nanotubes are suitable for temperature sensing applications over temperature ranges of 200-420 K and 300-440 K, respectively.

ELECTRON TRANSPORT THROUGH MULTILEVEL QUANTUM DOT

Quantum transport properties through some multilevel quantum dots sandwiched between two metallic contacts are investigated by the use of Green's function technique. Here, we do parametric calculations, based on the tight-binding model, to study the transport properties through such bridge systems. The electron transport properties are significantly influenced by (a) the number of quantized energy levels in the dots, (b) the dot-to-electrodes coupling strength, (c) the location of the equilibrium Fermi energy E F , and (d) the surface disorder. In the limit of weak-coupling, the conductance (g) shows sharp resonance peaks associated with the quantized energy levels in the dots, while, they get substantial broadening in the strong-coupling limit. The behavior of the electron transfer through these systems becomes much more clearly visible from our study of the current–voltage (I–V) characteristics. In this context, we also describe the noise power of current fluctuations (S) and determine the Fano factor (F) which provides an important information about the electron correlation among the charge carriers. Finally, we explore a novel transport phenomenon by studying the surface disorder effect in which the current amplitude increases with the increase of the surface disorder strength in the strong disorder regime, while, the amplitude decreases in the limit of weak disorder. Such an anomalous behavior is completely opposite to that of bulk disordered system where the current amplitude always decreases with the disorder strength. It is also observed that the current amplitude strongly depends on the system size which reveals the finite quantum size effect.

Formation and characterization of organic monolayers on semiconductor surfaces

Organic-semiconductor interfaces are playing increasingly important roles in fields ranging from electronics to nanotechnology to biosensing. The continuing decrease in microelectronic device feature sizes is raising an especially great interest in understanding how to integrate molecular systems with conventional, inorganic microelectronic materials, particularly silicon. The explosion of interest in the biological sciences has provided further impetus for learning how to integrate biological molecules and systems with microelectronics to form true bioelectronic systems. Organic monolayers present an excellent opportunity for surmounting many of the practical barriers that have hindered the full integration of microelectronics technology with organic and biological systems. Of all the semiconductor materials, silicon and diamond stand out as unique. This review focuses upon the preparation and characterization of organic and biomolecular layers on semiconductor surfaces, with special emphasis on monolayers formed on silicon and diamond.

QUANTUM TRANSPORT THROUGH SINGLE PHENALENYL MOLECULE: EFFECT OF INTERFACE STRUCTURE

The electronic transport characteristics through a single phenalenyl molecule sandwiched between two metallic electrodes are investigated by using Green's function technique. A parametric approach, based on the tight-binding model, is used to study the transport characteristics through such molecular bridge system. The electronic transport properties are significantly influenced by (a) the molecule-to-electrodes interface structure and (b) the molecule-to-electrodes coupling strength.

Kondo-peak splitting and coherent transport in a single-electron transistor

The peculiar behavior of Kondo-peak splitting under a magnetic field and bias can be explained by calculating the nonequilibrium retarded Green's function via the nonperturbative dynamical theory (NDT). In the NDT, the application of a lead-dot-lead system reveals that new resonant tunneling levels are activated near the Fermi level and the conventional Kondo peak at the Fermi level diminishes when a bias is applied. Magnetic field causes asymmetry in the spectral density and transforms the new resonant peak into a major peak whose behavior explains all the features of the nonequilibrium Kondo phenomenon. We also show the mechanism of coherent transport through the new resonant tunneling level.

The quantum interference effect transistor

We give a detailed discussion of the quantum interference effect transistor (QuIET), a proposed device which exploits the interference between electron paths through aromatic molecules to modulate the current flow. In the off state, perfect destructive interference stemming from the molecular symmetry blocks the current, while in the on state, the current is allowed to flow by locally introducing either decoherence or elastic scattering. Details of a model calculation demonstrating the efficacy of the QuIET are presented, and various fabrication scenarios are proposed, including the possibility of using conducting polymers to connect the QuIET with multiple leads.

Nonequilibrium electronic transport of 4,4'-bipyridine molecular junction

The electronic transport properties of a 4,4'-bipyridine molecule sandwiched between two Au(111) surfaces are studied with a fully self-consistent nonequilibrium Green's-function method combined with the density-functional theory. The 4,4'-bipyridine molecule prefers to adsorb near the hollow site of the Au(111) surface and distorts slightly. The modifications on the electronic structure of the molecule due to the presence of the electrodes are described by the renormalized molecular orbitals, which correspond well to the calculated transmission peaks. The average Fermi level lies close to the lowest unoccupied renormalized molecular orbital, which determines the electronic transport property of the molecular junction under a small bias voltage. The total transmission is contributed by a single channel. The transmission peaks shift with the applied bias voltage, and this behavior depends on the spatial distribution of the renormalized molecular orbitals and the voltage drop along the molecular junction. The shape of the calculated conductance curve of the equilibrium geometric configuration reproduces the main feature of the experimental results, but the value is larger than the measured data by about 6 times. Good agreement with the experimental measurements can be obtained by elongating the molecular junction. The electronic transport behaviors depend strongly on the interface configuration.

Dynamics of charge transfer: rate processes formulated with nonequilibrium Green's functions

The authors examine the connection between electron transport under bias in a junction and nonadiabatic intramolecular electron transfer (ET). It is shown that under certain assumptions it is possible to define a stationary current that allows the computation of the intramolecular transfer rate using the same formalism that is employed in the description of transport. They show that the nonequilibrium Green's function formalism of quantum transport can be used to calculate the ET rate. The formal connection between electron transport and electron transfer is made, and they work out the simple case of an electronic level coupled to a vibrational mode representing a thermal bath and show that the result is the same as expected from a Fermi golden rule treatment, and in the high-temperature limit yields the Marcus electron transfer theory. The usefulness of this alternative formulation of rates is discussed.

Electron tunneling through alkanedithiol self-assembled monolayers in large-area molecular junctions

The electrical transport through self-assembled monolayers of alkanedithiols was studied in large-area molecular junctions and described by the Simmons model [Simmons JG (1963) J Appl Phys 34:1793-1803 and 2581-2590] for tunneling through a practical barrier, i.e., a rectangular barrier with the image potential included. The strength of the image potential depends on the value of the dielectric constant. A value of 2.1 was determined from impedance measurements. The large and well defined areas of these molecular junctions allow for a simultaneous study of the capacitance and the tunneling current under operational conditions. Electrical transport for octanedithiol through tetradecanedithiol self-assembled monolayers up to 1 V can simultaneously be described by a single effective mass and a barrier height. There is no need for additional fit constants. The barrier heights are in the order of 4-5 eV and vary systematically with the length of the molecules. Irrespective of the length of the molecules, an effective mass of 0.28 was determined, which is in excellent agreement with theoretical predictions.

The Green's Function Density Functional Tight-Binding (gDFTB) Method for Molecular Electronic Conduction

A review is presented of the nonequilibrium Green's function (NEGF) method "gDFTB" for evaluating elastic and inelastic conduction through single molecules employing the density functional tight-binding (DFTB) electronic structure method. This focuses on the possible advantages that DFTB implementations of NEGF have over conventional methods based on density functional theory, including not only the ability to treat large irregular metal-molecule junctions with high nonequilibrium thermal distributions but perhaps also the ability to treat dispersive forces, bond breakage, and open-shell systems and to avoid large band lineup errors. New results are presented indicating that DFTB provides a useful depiction of simple gold-thiol interactions. Symmetry is implemented in DFTB, and the advantages it brings in terms of large savings of computational resources with significant increase in numerical stability are described. The power of DFTB is then harnessed to allow the use of gDFTB as a real-time tool to discover the nature of the forces that control inelastic charge transport through molecules and the role of molecular symmetry in determining both elastic and inelastic transport. Future directions for the development of the method are discussed.

Conductance oscillations of a quantum wire disturbed by an adatom

The conductance through a quantum wire with a side-attached atom (adatom) is investigated using the tight-binding Hamiltonian and Green function method. The adatom can be coupled with one or more atoms and it disturbs the electron transport through the wire. Analytical formulae for the transmittance are obtained for the most probable connections. Also, conductance oscillations as a function of the wire length are studied for a disturbed wire. It is shown that the period of these oscillations remains unchanged in the presence of the adatom but the value of the conductance strongly depends on the adatom-wire couplings and the kind of connections of the adatom to the wire.

Source and sink potentials for the description of open systems with a stationary current passing through

The authors present a model Hamiltonian for the description of open systems that exchange probability current density with their surroundings. The complex potentials appearing in this Hamiltonian act as source and sink, respectively, of probability current density. The primary applications of the theory of source and sink potentials are molecular electronic devices (MEDs), in the description of which the semi-infinite contacts are replaced by complex potentials. This is done in a rigorous manner, i.e., the exact wave function is recovered in the interior of the MED. To illustrate the approach, certain prototypical molecular conductors are considered in the Huckel approximation. The authors show that, for the examples considered, there exist almost isolated molecular states in the continuum of contact states that manifest themselves as Fano resonances in the transmission probability. The findings are confirmed by density functional theory calculations that also yield the predicted molecular states that are nearly decoupled from the contacts.

Interfacial bridge-mediated electron transfer: mechanistic analysis based on electrochemical kinetics and theoretical modelling

Understanding the physical and chemical factors that control the kinetics of interfacial electron-transfer (ET) reactions is important for a large number of technological applications. The present article describes electrochemical kinetic studies of these factors, in which standard interfacial ET rate constants (k(0)(l)) have been measured for ET between substrate Au electrodes and various redox couples attached to the electrode surfaces by variable lengths (l) of oligomethylene (OM), oligophenylenevinylene (OPV) and oligophenyleneethynylene (OPE) bridges, which were constituents of mixed self-assembled monolayers (SAMs). The k(0)(l) measurements employed the indirect laser-induced temperature jump (ILIT) technique, which permits the measurement of interfacial ET rates that are orders of magnitude faster than those measurable by conventional techniques using the macroelectrodes that are the most convenient substrates for the mixed SAMs. The robustness of the measured rate constants (k(0)(l)), together with the Arrhenius activation energies (E(a)(l)) and preexponential factors (A(l)), is demonstrated by their invariance with respect to several experimental system parameters (including the chemical nature and length of the diluent component of the mixed SAM). Analysis of the kinetic results demonstrates that all of the observed interfacial ET processes proceed through a common type of transition state (predominantly associated with solvent reorganization around the redox moiety) and that the actual ET step involves direct electronic tunnelling between the Au electrode and the redox moiety. However, for the full range of l investigated, a global exponential decay of A(l) is not found for any of the three types of bridges. Possible reasons for this behavior, including the role of rate determining steps associated with adiabatic mechanisms within or beyond the transition state theory framework, are discussed, and comparisons with related conductance measurements are presented.

Effects of hydrogen bonding on current-voltage characteristics of molecular junctions

We present a first-principles study of hydrogen bonding effect on current-voltage characteristics of molecular junctions. Three model charge-transfer molecules, 2'-amino-4,4'-di(ethynylphenyl)-1-benzenethiolate (DEPBT-D), 4,4'-di(ethynylphenyl)-2'-nitro-1-benzenethiolate (DEPBT-A), and 2'-amino-4,4'-di(ethynylphenyl)-5'-nitro-1-benzenethiolate (DEPBT-DA), have been examined and compared with the corresponding hydrogen bonded complexes formed with different water molecules. Large differences in current-voltage characteristics are observed for DEPBT-D and DEPBT-A molecules with or without hydrogen bonded waters, while relatively small differences are found for DEPBT-DA. It is predicted that the presence of water clusters can drastically reduce the conductivities of the charge-transfer molecules. The underlying microscopic mechanism has been discussed.

Controlling quantum transport through a single molecule

We investigate multiterminal quantum transport through single monocyclic aromatic annulene molecules, and their derivatives, using the nonequilibrium Green function approach within the self-consistent Hartree-Fock approximation. We propose a new device concept, the quantum interference effect transistor, that exploits perfect destructive interference stemming from molecular symmetry and controls current flow by introducing decoherence and/or elastic scattering that break the symmetry. This approach overcomes the fundamental problems of power dissipation and environmental sensitivity that beset nanoscale device proposals.

An elongation method for first principle simulations of electronic structures and electron transport properties of finite nanostructures

An effective elongation method has been developed to study electronic structures and electron transport properties of nanoelectronic and bioelectronic devices at a hybrid density functional theory level. It enables to treat finite nanostructures consisting of as many as 28 000 electrons and has been successfully applied to sub-120-nm-long conjugated polymers, sub-60-nm-long single-walled carbon nanotubes, and 30 base-pair DNA molecules. The calculated current-voltage characteristics of different systems are found to be in good agreement with the experiments. Some unexpected behaviors of these nanosized devices have been discovered.

Modulation of Molecular Conductance Induced by Electrode Atomic Species and Interface Geometry

We present a systematic theoretical investigation of the interaction of an organic molecule with gold and palladium electrodes. We show that the chemical nature of the electrode elicits significant geometrical changes in the molecule. These changes, which are characteristic of the electrode atomic species and the interface geometry, are shown to occur at distances as great as 10 Angstrom from the interface, leading to a significant modification of the inherent electronic properties of the molecule. In certain interface geometries, the highest occupied molecular orbital (HOMO) of the palladium-contacted molecule exhibits enhanced charge delocalization at the center of the molecule, compared to gold. Also, the energy gap between the conductance peak of the lowest unoccupied molecular orbital (LUMO) and the Fermi level is smaller for the case of the palladium electrode, thereby giving rise to a higher current level at a given bias than the gold-contacted molecule. These results indicate that an optimal choice of the atomic species and contact geometry could lead to significantly enhanced conductance of molecular devices and could serve as a viable alternative to molecular derivatization.

Self-similarity of single-channel transmission for electron transport in nanowires

We demonstrate that the single-channel transmission in the resonance tunneling regime exhibits self-similarity as a function of the nanowire length and the energy of incident electrons. The self-similarity is used to design the nonlinear transformation of the nanowire length and energy which, on the basis of known values of transmission for a certain region on the energy-length plane, yields transmissions for other regions on this plane. Test calculations with a one-dimensional tight-binding model illustrate the described transformations. Density function theory based transport calculations of Na atomic wires confirm the existence of the self-similarity in the transmission.

The influence of ultrafast laser pulses on electron transfer in molecular wires studied by a non-Markovian density-matrix approach

New features of molecular wires can be observed when they are irradiated by laser fields. These effects can be achieved by periodically oscillating fields but also by short laser pulses. The theoretical foundation used for these investigations is a density-matrix formalism where the full system is partitioned into a relevant part and a thermal fermionic bath. The derivation of a quantum master equation, either based on a time-convolutionless or time-convolution projection-operator approach, incorporates the interaction with time-dependent laser fields nonperturbatively and is valid at low temperatures for weak system-bath coupling. From the population dynamics the electrical current through the molecular wire is determined. This theory including further extensions is used for the determination of electron transport through molecular wires. As examples, we show computations of coherent destruction of tunneling in asymmetric periodically driven quantum systems, alternating currents and the suppression of the directed current by using a short laser pulse.

A generalized quantum chemical approach for elastic and inelastic electron transports in molecular electronics devices

A generalized quantum chemical approach for electron transport in molecular devices is developed. It allows one to treat devices where the metal electrodes and the molecule are either chemically or physically bonded on equal footing. An extension to include the vibration motions of the molecule has also been implemented which has produced the inelastic electron-tunneling spectroscopy of molecular electronics devices with unprecedented accuracy. Important information about the structure of the molecule and of metal-molecule contacts that are not accessible in the experiment are revealed. The calculated current-voltage (I-V) characteristics of different molecular devices, including benzene-1,4-dithiolate, octanemonothiolate [H(CH2)8S], and octanedithiolate [S(CH2)8S] bonded to gold electrodes, are in very good agreement with experimental measurements.

Electrical transport in saturated and conjugated molecular wires

The mechanism for charge transport in dithio molecular wires tethered between two gold electrodes is investigated, using both a steady state and a time-dependent quantum mechanical approach. The interface with the electrodes is modeled by two gold clusters and the electronic structure of the entire Au(n)-S-bridge-S-Au(n) system is computed ab initio at the DFT level and semi-empirically, with the extended Hückel theory. Current vs. applied bias, I-V, curves are computed using a scattering Landauer-type formalism in a steady state picture. The applied source-drain and gate voltages are included at the ab initio level in the electronic Hamiltonian and found to influence strongly the I-V characteristics. The time evolution of a non stationary electronic wave packet initially localized on a gold atom at one end of the extended system shows that charge transfer proceeds sequentially, by a hopping mechanism, to the opposite end. Analysis of the effective one electron Hamiltonian matrix shows that the sulfur atom endows a resistive character to the Au-C-S junctions. The S atoms are however rather well coupled to both the gold and carbon atoms so that typically the super exchange limit for electron transfer is not reached unless the molecular bridge is saturated and the Fermi window function is narrow.

Binding at molecule/gold transport interfaces. V. Comparison of different metals and molecular bridges

The geometric and electronic structural properties of symmetric and asymmetric metal cluster-molecule-cluster' complexes have been explored. The metals include Au, Ag, Pd, and Al, and both benzenedithiol and the three isometric forms of dicyanobenzene are included as bridging molecules. Calculated properties such as cluster-molecule interface geometry, electronic state, degree of metal --> molecule charge transfer, metal-molecule mixing in the highest occupied molecular orbital-lowest unoccupied molecular orbital (HOMO-LUMO) energy region, the HOMO-LUMO gap, cluster --> cluster' charge transfer as a function of external field strength and direction, and the form of the potential profile across such complexes have been examined. Attempts are made to correlate charge transport with the characteristics of the cluster-complex systems. Indications of rectification in complexes that are asymmetric in the molecule, clusters, and molecule-cluster interfaces are discussed. The results obtained here are only suggestive because of the limitations of the cluster-complex model as it relates to charge transport.

Low-temperature electronic transport through macromolecules and characteristics of intramolecular electron transfer

Long-distance electron transfer (ET) plays an important part in many biological processes. Also, fundamental understanding of ET processes could give grounds for designing miniaturized electronic devices. So far, experimental data on the ET mostly concern ET rates which characterize ET processes as a whole. Here, we develop a different approach which could provide more information about intrinsic characteristics of the long-range intramolecular ET. A starting point of the studies is an obvious resemblance between ET processes and electric transport through molecular wires placed between metallic contacts. Accordingly, the theory of electronic transport through molecular wires is applied to analyze characteristics of a long-range electron transfer through molecular bridges. Assuming a coherent electron tunneling to be a predominant mechanism of ET at low temperatures, it is shown that low-temperature current-voltage characteristics could exhibit a special structure, and the latter contains information concerning intrinsic features of the intramolecular ET. Using the Buttiker dephasing model within the scattering matrix formalism, we analyze the effect of dephasing on the electron transmission function and current-voltage curves.

Overcoming computational uncertainties to reveal chemical sensitivity in single molecule conduction calculations

In the calculation of conduction through single molecule's approximations about the geometry and electronic structure of the system are usually made in order to simplify the problem. Previously [G. C. Solomon, J. R. Reimers, and N. S. Hush, J. Chem. Phys. 121, 6615 (2004)], we have shown that, in calculations employing cluster models for the electrodes, proper treatment of the open-shell nature of the clusters is the most important computational feature required to make the results sensitive to variations in the structural and chemical features of the system. Here, we expand this and establish a general hierarchy of requirements involving treatment of geometrical approximations. These approximations are categorized into two classes: those associated with finite-dimensional methods for representing the semi-infinite electrodes, and those associated with the chemisorption topology. We show that ca. 100 unique atoms are required in order to properly characterize each electrode: using fewer atoms leads to nonsystematic variations in conductivity that can overwhelm the subtler changes. The choice of binding site is shown to be the next most important feature, while some effects that are difficult to control experimentally concerning the orientations at each binding site are actually shown to be insignificant. Verification of this result provides a general test for the precision of computational procedures for molecular conductivity. Predictions concerning the dependence of conduction on substituent and other effects on the central molecule are found to be meaningful only when they exceed the uncertainties of the effects associated with binding-site variation.

Electron tunneling of photochemical reactions on metal surfaces: Nonequilibrium Green’s function–density functional theory approach to photon energy dependence of reaction probability

We have developed a theoretical model of photoinduced reactions on metal surfaces initiated by the substrate/indirect excitation mechanism using the nonequilibrium Green's function approach. We focus on electron transfer, which consists of (1) electron-hole pair creation, (2) transport of created hot electrons, and (3) tunneling of hot electrons to form an anion resonance. We assume that steps (1), (2), and (3) are separable. By this assumption, the electron dynamics might be restated as a tunneling problem of an open system. Combining the Keldysh time-independent formalism with the simple transport theory introduced by Berglund and Spicer, we present a practical scheme for first-principle calculation of the reaction probability as a function of incident photon energy. The method is illustrated by application to the photoinduced desorption/dissociation of O2 on a Ag(110) surface by adopting density functional theory.

Approximate density functionals applied to molecular quantum dots

Recently, molecular quantum dots (MQDs) have been investigated experimentally and found to exhibit the Kondo effect. The Kondo effect leads to an enhancement of the zero-voltage conductance. Here, we study a finite cluster model of a MQD by means of Kohn-Sham density functional theory. Furthermore, employing an implementation of Landauer's formula, we calculate the conductance of the dot. We find that the electronic structure and the molecular conductance depend strongly on the exchange-correlation functional employed. While the local spin density approximation and the Perdew-Burke-Ernzerhof (PBE) generalized gradient approximation qualitatively reproduce certain features of the Kondo effect, PBE hybrid does not. Based on the MQD, we discuss the limitations of using density functional theory to model molecular electronic devices.

Electrical addressing of confined quantum systems for quasiclassical computation and finite state logic machines

Conduction spectroscopy measures the current I through a nanosystem as a function of the voltage V between two electrodes. The differential conductance, dI/dV, has peaks that can be assigned to resonance conditions with different electronic levels of the system. Between these increments, the current has roughly constant plateaus. We discuss how measurements of the current vs. voltage can be used to perform Boolean operations and hence construct finite state logic machines and combinational circuits. The inputs to the device are the source-drain voltage, including its sign, and a gate voltage applied in a manner analogous to optical Stark spectroscopy. As simple examples, we describe a two-state set-reset machine (a machine whose output depends on the input and also on its present state) and a full adder circuit (a circuit that requires three inputs and provides two outputs).

Current and noise in a model of an alternating current scanning tunneling microscope molecule-metal junction

The transport properties of a simple model for a finite level structure (a molecule or a dot) connected to metal electrodes in an alternating current scanning tunneling microscope (ac-STM) configuration is studied. The finite level structure is assumed to have strong binding properties with the metallic substrate, and the bias between the STM tip and the hybrid metal-molecule interface has both an ac and a dc component. The finite frequency current response and the zero-frequency photoassisted shot noise are computed using the Keldysh technique, and examples for a single-site molecule (a quantum dot) and for a two-site molecule are examined. The model may be useful for the interpretation of recent experiments using an ac-STM for the study of both conducting and insulating surfaces, where the third harmonic component of the current is measured. The zero-frequency photoassisted shot noise serves as a useful diagnosis for analyzing the energy level structure of the molecule. The present work motivates the need for further analysis of current fluctuations in electronic molecular transport.

Stacking Effect of Polyfluorene on the Chemical Shift and Electron Transport

We investigate the structures, NMR chemical shifts, absorption spectra, frontier molecular orbitals, and transition density matrices of pi-stacked polyfluorenes by ab initio calculations. For F1-F4, we consider two different conformations, syn and anti. The simulated 1H NMR chemical shifts are in good agreement with the previous experiment, and the significantly upfielded chemical shifts explain that the fluorene moieties are stacked on each other. It is found that the relative stability for syn and anti conformers is almost equivalent in B3LYP calculations; however, the syn conformer becomes much more stable than the anti conformer in MP2 calculations, which is consistent with the experimental finding that only the syn conformers are relevant. The vertical detachment energy, which is linearly proportional to the ionization potential, shows the same size dependence as the previous experiment. The electron attachment energy decreases exponentially as the size increases, which implies that the electron transport would be possible even for long chains such as F3 and F4. This was evident from the frontier molecular orbitals (HOMO and LUMO). Also, it is found that the syn conformers are very favorable for electron transport through the pi-stacked fluorene moieties.

Photoconductivity and current producing states in molecular semiconductors

We present a methodology for computing photocurrent production in molecular semiconducting molecules. Our model combines a single-configuration interaction picture with the nonequilibrium Green's function approach to compute the current response of a molecular semiconducting wire following excitation. We give detailed analysis of the essential excitonic, charge transfer, and dipole states for poly-(phenylenevinylene) chains of length 32 and 48 repeat units under an electric field bias and use this to develop a reduced dimensional tunneling model which accounts for chain-length and field-dependent behavior. In this paper, we consider the decay of an excited electron/hole state on a molecular wire under bias attached to semiconducting leads at either end. We find that the current produced by the decay of an excitation depends not only upon the lifetime of the state, as given by the imaginary part of its complex eigenvalue, but also upon the net charge on terminal ends of the molecule. We also find that weakly bound electron/hole charge-transfer pairs can decay into the continuum via field induced tunneling and produce a net current whereas excitonic states decay via tunneling but give no net current contribution.