Roles of Polymer Ligands in Nanoparticle Stabilization

Secondary organic aerosol coating of synthetic metal-oxide nanoparticles

Secondary organic aerosol (SOA) from the α-pinene + ozone reaction readily coats TiO(2) and CeO(2) metal-oxide nanoparticles in smog-chamber experiments under atmospherically relevant conditions. Otherwise identical experiments compared bare nanoparticles and nanoparticles coated with poly(acrylic acid) (PAA). The PAA-coated particles result in significantly higher new-particle formation rates, suggesting that the SOA vapors coat bare metal oxide more readily than the PAA. After particles begin to grow via SOA coating, however, all particles, independent of size or the presence of a metal-oxide core, grow with a rate proportional to their surface area, modified to account for gas-phase diffusion in the transition regime between the kinetic and bulk-flow regimes. This suggests that SOA condensational growth may be modeled based on the size distribution of the condensational sink in the atmosphere.

Air-stable magnesium nanocomposites provide rapid and high-capacity hydrogen storage without using heavy-metal catalysts

Hydrogen is a promising alternative energy carrier that can potentially facilitate the transition from fossil fuels to sources of clean energy because of its prominent advantages such as high energy density (142 MJ kg(-1); ref. 1), great variety of potential sources (for example water, biomass, organic matter), light weight, and low environmental impact (water is the sole combustion product). However, there remains a challenge to produce a material capable of simultaneously optimizing two conflicting criteria--absorbing hydrogen strongly enough to form a stable thermodynamic state, but weakly enough to release it on-demand with a small temperature rise. Many materials under development, including metal-organic frameworks, nanoporous polymers, and other carbon-based materials, physisorb only a small amount of hydrogen (typically 1-2 wt%) at room temperature. Metal hydrides were traditionally thought to be unsuitable materials because of their high bond formation enthalpies (for example MgH(2) has a ΔHf~75 kJ mol(-1)), thus requiring unacceptably high release temperatures resulting in low energy efficiency. However, recent theoretical calculations and metal-catalysed thin-film studies have shown that microstructuring of these materials can enhance the kinetics by decreasing diffusion path lengths for hydrogen and decreasing the required thickness of the poorly permeable hydride layer that forms during absorption. Here, we report the synthesis of an air-stable composite material that consists of metallic Mg nanocrystals (NCs) in a gas-barrier polymer matrix that enables both the storage of a high density of hydrogen (up to 6 wt% of Mg, 4 wt% for the composite) and rapid kinetics (loading in <30 min at 200 °C). Moreover, nanostructuring of the Mg provides rapid storage kinetics without using expensive heavy-metal catalysts.

Controlled release of biologically active silver from nanosilver surfaces

Major pathways in the antibacterial activity and eukaryotic toxicity of nanosilver involve the silver cation and its soluble complexes, which are well established thiol toxicants. Through these pathways, nanosilver behaves in analogy to a drug delivery system, in which the particle contains a concentrated inventory of an active species, the ion, which is transported to and released near biological target sites. Although the importance of silver ion in the biological response to nanosilver is widely recognized, the drug delivery paradigm has not been well developed for this system, and there is significant potential to improve nanosilver technologies through controlled release formulations. This article applies elements of the drug delivery paradigm to nanosilver dissolution and presents a systematic study of chemical concepts for controlled release. After presenting thermodynamic calculations of silver species partitioning in biological media, the rates of oxidative silver dissolution are measured for nanoparticles and macroscopic foils and used to derive unified area-based release kinetics. A variety of competing chemical approaches are demonstrated for controlling the ion release rate over 4 orders of magnitude. Release can be systematically slowed by thiol and citrate ligand binding, formation of sulfidic coatings, or the scavenging of peroxy-intermediates. Release can be accelerated by preoxidation or particle size reduction, while polymer coatings with complexation sites alter the release profile by storing and releasing inventories of surface-bound silver. Finally, the ability to tune biological activity is demonstrated through a bacterial inhibition zone assay carried out on selected formulations of controlled release nanosilver.

Comparative study of polymeric stabilizers for magnetite nanoparticles using ATRP

A series of polyelectrolytes with controlled molecular weight, a narrow chain-length distribution, and systematic structural differences were synthesized using atom-transfer radical polymerization and investigated as stabilizers for magnetite nanoparticles in aqueous suspensions. Structural differences include the degree of polymerization, the chain architecture, and the identity of the charged functional unit. The synthesized polymers are sulfonated poly(2-hydroxyethyl methacrylate), a block copolymer of the former with poly(n-butyl methacrylate), poly(sodium styrene sulfonate), poly(sodium acrylate), and poly(sodium vinylphosphonate). The colloidal stability is assessed by measuring the fraction of particles, based on turbidity, that sediment after a period of time at increasing ionic strength. Sedimentation results are complimented by dynamic light scattering determinations of the hydrodynamic diameter of the particles that remain suspended. When adsorption and sedimentation are conducted at high pH, poly(sodium acrylate) and poly(sodium vinylphosphonate) yield the most stable suspensions because of their strong coordinative interactions with the iron oxide surface. At low pH, the polymers that retain pendant negative charges (each of the sulfonated polymers) yield high stable fractions at all ionic strengths investigated up to 100 mM (NaCl), whereas polyelectrolytes that become protonated with decreasing pH, poly(sodium acrylate) and poly(sodium vinylphosphonate), lose their stabilizing capacity even at low ionic strengths. The chain-length distribution profoundly alters a polymer's stabilization tendencies. Two poly(sodium acrylate) samples with the same number-average molecular weight but widely different chain-length distributions proved to have opposite tendencies, with the polydisperse sample being a good stabilizer and the low polydispersity one being a strong flocculant. This investigation provides guidelines for the design of polymeric stabilizers for magnetite nanoparticles according to the pH and ionic strength of the intended application.

Aggregation Characteristics of Cu and Ag Nanoparticles in Presence of Starch as the Polymer Stabilizer

This presentation deals with the aggregation characteristics of Cu and Ag nanoparticles in presence of starch as the polymer stabilizer. Uncontrolled aggregation of the destabilized nanoparticles offers problem for applications based on surface plasmon activity. Polymer or small molecule surfactants are used to control nature of aggregation of nanoparticles produced by chemical reduction synthesis routes. Different growth models such as diffusion limited cluster aggregation (DLCA), reaction limited cluster aggregation (RLCA) proposed to explain the formation of fractal colloidal aggregates do not account for aggregate formation in presence of polymer or small molecule surfactants. We shall be discussing the role of starch on the aggregation characteristics of copper and silver nanoparticles formed by chemical reduction in aqueous conditions. The effect of NaOH concentration and consequently the pH on such aggregation kinetics during such synthesis is delineated. We use small angle x-ray scattering (SAXS) to quantitatively understand different aspects of aggregation behavior.

Surface modification, functionalization and bioconjugation of colloidal inorganic nanoparticles

Inorganic colloidal nanoparticles are very small, nanoscale objects with inorganic cores that are dispersed in a solvent. Depending on the material they consist of, nanoparticles can possess a number of different properties such as high electron density and strong optical absorption (e.g. metal particles, in particular Au), photoluminescence in the form of fluorescence (semiconductor quantum dots, e.g. CdSe or CdTe) or phosphorescence (doped oxide materials, e.g. Y(2)O(3)), or magnetic moment (e.g. iron oxide or cobalt nanoparticles). Prerequisite for every possible application is the proper surface functionalization of such nanoparticles, which determines their interaction with the environment. These interactions ultimately affect the colloidal stability of the particles, and may yield to a controlled assembly or to the delivery of nanoparticles to a target, e.g. by appropriate functional molecules on the particle surface. This work aims to review different strategies of surface modification and functionalization of inorganic colloidal nanoparticles with a special focus on the material systems gold and semiconductor nanoparticles, such as CdSe/ZnS. However, the discussed strategies are often of general nature and apply in the same way to nanoparticles of other materials.

Effect of ligands on thermal dissipation from gold nanorods

Thermal interface conductance was measured for soluble gold nanorods (NRs) coated with mercaptocarboxylic acids (HS-(CH(2))(n)COOH, n = 5, 10, 15), thiolated polyethylene glycols (MW = 356, 1000, 5000), and HS-(CH(2))(15)-COOH-coated NRs further coated with alternating layers of poly(diallyldimethylammonium chloride) and poly(sodium styrenesulfonate). Ferguson analysis determined ligand thickness. The thermal-diffusion-dominated regime of transient absorption spectra was fit to a continuum heat diffusion finite element model to obtain the thermal interface conductance, G, which varied with ligand chemistry but not molecule length. The results suggest that the ability to exclude water from the NR surface governs ligand G values.

Cellular uptake of densely packed polymer coatings on gold nanoparticles

A variety of functional polymer chains prepared by RAFT were directly grafted onto 5, 10, and 20 nm gold nanoparticles (AuNPs). The polymer shell coating the AuNPs was densely packed because of the strong binding between the trithioester groups on the polymer chain-ends and gold. It was found that due to the densely packed nature of the shell the polymer chains were significantly stretched compared to their usual Gaussian coil conformation in water. This was even evident for polymer chains where ionic repulsion between neighboring chains should be significant. Therefore, with such high grafting densities the surface properties and size of the hybrid nanoparticles should be the only contributing factors in cellular uptake in epithelial Caco-2 cells. This study has provided valuable insight into the effects of charge and size of NPs for the application of NPs in the delivery of therapeutic agents across the intestine. Our results showed that the negatively charged AuNPs were taken up by the cells with greater efficiency than the neutral AuNPs, most probably due to binding with membrane proteins. The positively charged AuNPs as expected gave the greatest uptake efficiency. Interestingly, the uptake for PNIPAM-AuNPs (hydrophobic coating at 37 degrees C) increased from approximately 2% efficiency after a 30 min incubation to 8% after 2 h, and was much greater than the negative or neutral AuNPs. We believe that this was due to the interplay between the hydrophobic nature of the NPs and their increased size.

Structural control of Au and Au–Pd nanoparticles by selecting capping ligands with varied electronic and steric effects

Weakly interacting ligands including three Gemini surfactants, didodecyldimethylammonium bromide (DDAB), and amines (RNH2, R2NH, and R3N) were used to prepare Au nanoparticles (NPs). Aqueous Au NPs capped with DDAB and Gemini surfactants showed similar sizes (3–4 nm), whereas toluene-based NPs stabilized with DDAB, amines, and their mixtures range from 2.5 to 9.3 nm. Ligand effect on Au–Pd NP structure was also studied with EXAFS. These findings were consistently accounted for by considering the ligand’s electronic/steric effects and mixed ligands coadsorption, and suggest useful ways to control NP structure by manipulating the two effects and using mixed capping ligands.

On the solution self-assembly of nanocolloidal brushes: insights from simulations

The synthesis of novel nanoparticles with exceptional properties continues to stimulate the search for advanced applications in fields as diverse as solar energy harvesting and polymer reinforcement. It is widely recognized that to practically exploit the promised benefits it is necessary to guide the assembly of the various nanoparticles into well-defined supra-molecular structures. Towards this goal, we report Monte Carlo simulation results for the self-assembly of spherical nanoparticles in implicit solvent. The nanoparticles interact solely via dispersive interactions, modeled as square-well potentials. To control the morphology of the self-assembled aggregates, side chains are grafted on specific locations on the nanoparticle surface (i.e., on the equator, on the tropics, on the entire tropical region, or uniformly on the nanoparticle surface). The results are discussed in terms of average cluster size, probability of observing aggregates of given size, and aggregate radius of gyration and asphericity as a function of the aggregate size. The parameters of interest are the solution conditions and the nanoparticle volume fraction (always in the dilute regime). As shown in previous reports (e.g., Striolo 2007 Small 3 628), the nanoparticles form insoluble agglomerates in the absence of the side chains. When the side chains are long and uniformly distributed on the nanoparticles, these remain individually dispersed in solution. More importantly, when the side chains are grafted on selected locations on the nanoparticles, these self-assemble, yielding structures composed of up to 7-10 nanoparticles. The number of grafted side chains is the parameter that predominantly determines the average aggregate size, while the aggregate morphology can be tuned by appropriately controlling the distribution and length of the grafted side chains.

Cross-linked polynorbornene-coated gold nanoparticles: dependence of particle stability on cross-linking position and cross-linker structure

This paper describes the preparation of cross-linked polynorbornene coated gold nanoparticles. The polymer was grown radially from the particle surface using a ring opening metathesis polymerization of norbornene and an electrophilic norbornene ester, which was cross-linked using a variety of diamines. The stability of the cross-linked nanoparticles toward oxidative etching by cyanide was evaluated. The rate of etching decreases as diamines with fewer degrees of conformational freedom are used as cross-linkers. The distance of the cross-linking block from the nanoparticle surface was systematically varied. Nanoparticles with the cross-linked block furthest from the surface were etched most slowly. This is suggested to arise as a result of the polymers adopting a mushroom conformation when the cross-linking block is close to the particle surface, while more distal cross-linking results in more rigid polymer chains that are less permeable to the cyanide etchant. These results provide new insight into how fine-tuning the polymer cross-linking architecture can modulate nanoparticle stability.

Identification of acidic phosphorus-containing ligands involved in the surface chemistry of CdSe nanoparticles prepared in tri-N-octylphosphine oxide solvents

The surface ligand composition of CdSe nanoparticles prepared using technical grade tri-n-octylphosphine oxide (TOPO) was investigated using a nucleophilic ligand displacement methodology and (31)P {(1)H} NMR spectroscopy. 4-(N,N-Dimethylamino)pyridine (DMAP) and benzyltrimethylammonium propionate were added to tetrahydrofuran solutions of CdSe nanoparticles prepared in technical grade TOPO. DMAP was shown to be a sufficiently strong nucleophile to displace the more weakly coordinating ligands, TOPO, TOPSe, di-n-octylphosphinate, and n-octylphosphonate (OPA). Benzyltrimethylammonium propionate was shown to be a stronger nucleophile than DMAP in that it could displace all the aforementioned surface-bound ligands as well as a previously unidentified surface-bound phosphorus species. Independent synthesis and (31)P {(1)H} NMR spectral matching confirmed that the new species was P,P'-(di-n-octyl) dihydrogen pyrophosphonic acid (PPA). The PPA was shown to form during the nanoparticle synthesis via the dehydrative condensation of OPA. CdSe nanoparticle syntheses were performed using pure TOPO and added OPA, and subsequent displacement experiments showed that OPA and PPA were the predominant surface-bound ligands. CdSe nanoparticle syntheses were performed using pure TOPO and added PPA, and subsequent displacement experiments showed that PPA was the predominant surface-bound ligand. PPA was also shown to have the greatest affinity for the nanoparticle surface of all the ligands investigated. Thus, a model for the surface ligand composition could be developed for nanoparticles prepared using technical grade TOPO or other high-boiling solvents with added acidic phosphorus compounds.

Using cylindrical domains of block copolymers to self-assemble and align metallic nanowires

Block copolymer thin films can be used as soft templates for a wide range of surfaces where large area patterns of nanoscale features are desired. The cylindrical domains of acid-sensitive, self-assembled monolayers of polystyrene-poly(2-vinylpyridine) block copolymers on silicon surfaces were utilized as structural elements for the production of parallel metal nanowires. Metal ion loading of the P2VP block with simple aqueous solutions of anionic metal complexes is accomplished via protonation of this basic block, rendering it cationic; electrostatic attraction leads to a high local concentration of metal complexes within the protonated P2VP domain. A subsequent brief plasma treatment simultaneously removes the polymer and produces metallic nanowires. The morphology of the patterns can modulated by controlling solution concentration, deposition time, and molecular weight of the block copolymers, as well as other factors. Horizontal metallic nanoarrays can be aligned on e-beam lithographically defined silicon substrates within different shapes, via graphoepitaxy. This method is highly versatile as the procedures to manipulate nanowire composition, dimension, spacing, and orientation are straightforward and based upon efficient aqueous inorganic chemistry.

Synthesis and self-assembly of polymer-coated ferromagnetic nanoparticles

We describe the synthesis and characterization of polymer-coated ferromagnetic cobalt nanoparticles (CoNPs). The synthesis of end-functionalized polystyrene surfactants possessing amine, carboxylic acid, or phosphine oxide end-groups was accomplished using atom-transfer radical polymerization. This versatile synthetic method enabled the production of multigram quantities of these polymeric surfactants that stabilized ferromagnetic CoNPs when dispersed in organic media. An in-depth investigation into the synthesis of polystyrene-coated ferromagnetic CoNPs was also conducted using various combinations of these polymeric surfactants in the thermolysis of dicobaltoctacarbonyl (Co(2)(CO)(8)). Moreover, the application of a dual-stage thermolysis with Co(2)(CO)(8) allowed for the preparation of large samples (200-820 mg) per batch of well-defined and dispersable ferromagnetic nanoparticles. Characterization of these functionalized nanoparticle materials was then done using transmission electron microscopy, X-ray diffraction, vibrating sample magnetometry, and thermogravimetric analysis. Self-assembly of these dipolar nanoparticles was investigated in solutions cast onto supporting substrates, where local nematic-like ordering of nanoparticle chains was observed along with a tendency of adjacent chains to form "zippering" configurations, both phenomena having been predicted by recent simulations of dipolar fluids in conjunction with van der Waals interactions.