The processive endocellulase CelF, a major component of the Clostridium cellulolyticum cellulosome: purification and characterization of the recombinant form

Crystal structures of the cellulase Cel48F in complex with inhibitors and substrates give insights into its processive action

Cellulase Cel48F from Clostridium cellulolyticum was described as a processive endo-cellulase. The active site is composed of a 25 A long tunnel which is followed by an open cleft. During the processive action, the cellulose substrate has to slide through the tunnel to continuously supply the leaving group site with sugar residues after the catalytic cleavage. To study this processive action in the tunnel, the native catalytic module of Cel48F and the inactive mutant E55Q, have been cocrystallized with cellobiitol, two thio-oligosaccharide inhibitors (PIPS-IG3 and IG4) and the cello-oligosaccharides cellobiose, -tetraose and -hexaose. Seven sub-sites in the tunnel section of the active center could be identified and three of the four previously reported sub-sites in the open cleft section were reconfirmed. The sub-sites observed for the thio-oligosaccharide inhibitors and oligosaccharides, respectively, were located at two different positions in the tunnel corresponding to a shift in the chain direction of about a half sugar subunit. These two positions have different patterns of stacking interactions with aromatic residues present in the tunnel. Multiple patterns are not observed in nonprocessive endo-cellulases, where only one sugar position is favored by aromatic stacking. It is therefore proposed that the aromatic residues serve as lubricating agents to reduce the sliding barrier in the processive action.

Biochemical characterization of MI-ENG1, a family 5 endoglucanase secreted by the root-knot nematode Meloidogyne incognita

A beta-1,4-endoglucanase named MI-ENG1, homologous to the family 5 glycoside hydrolases, was previously isolated from the plant parasitic root-knot nematode Meloidogyne incognita. We describe here the detection of the enzyme in the nematode homogenate and secretion and its complete biochemical characterization. This study is the first comparison of the enzymatic properties of an animal glycoside hydrolase with plant and microbial enzymes. MI-ENG1 shares many enzymatic properties with known endoglucanases from plants, free-living or rumen-associated microorganisms and phytopathogens. In spite of the presence of a cellulose-binding domain at the C-terminus, the ability of MI-ENG1 to bind cellulose could not be demonstrated, whatever the experimental conditions used. The biochemical characterization of the enzyme is a first step towards the understanding of the molecular events taking place during the plant-nematode interaction.

Imaging the enzymatic digestion of bacterial cellulose ribbons reveals the endo character of the cellobiohydrolase Cel6A from Humicola insolens and its mode of synergy with cellobiohydrolase Cel7A

Dispersed cellulose ribbons from bacterial cellulose were subjected to digestion with cloned Cel7A (cellobiohydrolase [CBH] I) and Cel6A (CBH II) from Humicola insolens either alone or in a mixture and in the presence of an excess of beta-glucosidase. Both Cel7A and Cel6A were effective in partially converting the ribbons into soluble sugars, Cel7A being more active than Cel6A. In combination, these enzymes showed substantial synergy culminating with a molar ratio of approximately two-thirds Cel6A and one-third Cel7A. Ultrastructural transmission electron microscopy (TEM) observations indicated that Cel7A induced a thinning of the cellulose ribbons, whereas Cel6A cut the ribbons into shorter elements, indicating an endo type of action. These observations, together with the examination of the digestion kinetics, indicate that Cel6A can be classified as an endo-processive enzyme, whereas Cel7A is essentially a processive enzyme. Thus, the synergy resulting from the mixing of Cel6A and Cel7A can be explained by the partial endo character of Cel6A. A preparation of bacterial cellulose ribbons appears to be an appropriate substrate, superior to Valonia or bacterial cellulose microcrystals, to visualize directly by TEM the endo-processivity of an enzyme such as Cel6A.

CelE, a multidomain cellulase from Clostridium cellulolyticum: a key enzyme in the cellulosome?

CelE, one of the three major proteins of the cellulosome of Clostridium cellulolyticum, was characterized. The amino acid sequence of the protein deduced from celE DNA sequence led us to the supposition that CelE is a three-domain protein. Recombinant CelE and a truncated form deleted of the putative cellulose binding domain (CBD) were obtained. Deletion of the CBD induces a total loss of activity. Exhibiting rather low levels of activity on soluble, amorphous, and crystalline celluloses, CelE is more active on p-nitrophenyl-cellobiose than the other cellulases from this organism characterized to date. The main product of its action on Avicel is cellobiose (more than 90% of the soluble sugars released), and its attack on carboxymethyl cellulose is accompanied by a relatively small decrease in viscosity. All of these features suggest that CelE is a cellobiohydrolase which has retained a certain capacity for random attack mode. We measured saccharification of Avicel and bacterial microcrystalline cellulose by associations of CelE with four other cellulases from C. cellulolyticum and found that CelE acts synergistically with all tested enzymes. The positive influence of CelE activity on the activities of other cellulosomal enzymes may explain its relative abundance in the cellulosome.

Imaging the enzymatic digestion of bacterial cellulose ribbons reveals the endo character of the cellobiohydrolase Cel6A from Humicola insolens and its mode of synergy with cellobiohydrolase Cel7A

Dispersed cellulose ribbons from bacterial cellulose were subjected to digestion with cloned Cel7A (cellobiohydrolase [CBH] I) and Cel6A (CBH II) from Humicola insolens either alone or in a mixture and in the presence of an excess of beta-glucosidase. Both Cel7A and Cel6A were effective in partially converting the ribbons into soluble sugars, Cel7A being more active than Cel6A. In combination, these enzymes showed substantial synergy culminating with a molar ratio of approximately two-thirds Cel6A and one-third Cel7A. Ultrastructural transmission electron microscopy (TEM) observations indicated that Cel7A induced a thinning of the cellulose ribbons, whereas Cel6A cut the ribbons into shorter elements, indicating an endo type of action. These observations, together with the examination of the digestion kinetics, indicate that Cel6A can be classified as an endo-processive enzyme, whereas Cel7A is essentially a processive enzyme. Thus, the synergy resulting from the mixing of Cel6A and Cel7A can be explained by the partial endo character of Cel6A. A preparation of bacterial cellulose ribbons appears to be an appropriate substrate, superior to Valonia or bacterial cellulose microcrystals, to visualize directly by TEM the endo-processivity of an enzyme such as Cel6A.

Cellulosome from Clostridium cellulolyticum: molecular study of the Dockerin/Cohesin interaction

Clostridium cellulolyticum produces cellulolytic complexes (cellulosomes) made of 10-13 cell wall degrading enzymes tightly bound to a scaffolding protein (CipC) by means of their dockerin domain. It has previously been shown that the receptor domains in CipC are the cohesin domains and that the cohesin/dockerin interaction is calcium-dependent. In the present study, surface plasmon resonance was used to demonstrate that the free cohesin1 from CipC and dockerin from CelA have the same K(D) (2.5 x 10(-)(10) M) as that of the entire CelA and a larger fragment of CipC, the latter of which contains, in addition to cohesin1, a cellulose binding domain and a hydrophilic domain of unknown function. This demonstrates that neither the catalytic domain of CelA nor the noncohesin domains of CipC have any influence on the interaction. Dockerin domains are composed of two conserved segments of 22 residues: removal of the second segment abolishes the affinity for cohesin1, whereas modified dockerins having twice the first segment, twice the second, or both segments but in a reverse order have K(D) values for cohesin1 in the same range as that observed for wild-type dockerin. These data indicate that if two segments are required for the complexation with the cohesin, segments 1 and 2 are similar enough to replace each other. Calcium overlay experiments revealed that the dockerin domain has one calcium binding site per conserved segment. Circular dichroism performed on wild-type and mutant dockerins indicates that this domain is well structured and that removal of calcium only weakly affects the secondary structure, which remains 40-45% helical.

Sequence analysis of scaffolding protein CipC and ORFXp, a new cohesin-containing protein in Clostridium cellulolyticum: comparison of various cohesin domains and subcellular localization of ORFXp

The gene encoding the scaffolding protein of the cellulosome from Clostridium cellulolyticum, whose partial sequence was published earlier (S. Pagès, A. Bélaïch, C. Tardif, C. Reverbel-Leroy, C. Gaudin, and J.-P. Bélaïch, J. Bacteriol. 178:2279-2286, 1996; C. Reverbel-Leroy, A. Bélaïch, A. Bernadac, C. Gaudin, J. P. Bélaïch, and C. Tardif, Microbiology 142:1013-1023, 1996), was completely sequenced. The corresponding protein, CipC, is composed of a cellulose binding domain at the N terminus followed by one hydrophilic domain (HD1), seven highly homologous cohesin domains (cohesin domains 1 to 7), a second hydrophilic domain, and a final cohesin domain (cohesin domain 8) which is only 57 to 60% identical to the seven other cohesin domains. In addition, a second gene located 8.89 kb downstream of cipC was found to encode a three-domain protein, called ORFXp, which includes a cohesin domain. By using antiserum raised against the latter, it was observed that ORFXp is associated with the membrane of C. cellulolyticum and is not detected in the cellulosome fraction. Western blot and BIAcore experiments indicate that cohesin domains 1 and 8 from CipC recognize the same dockerins and have similar affinity for CelA (Ka = 4.8 x 10(9) M-1) whereas the cohesin from ORFXp, although it is also able to bind all cellulosome components containing a dockerin, has a 19-fold lower Ka for CelA (2.6 x 10(8) M-1). Taken together, these data suggest that ORFXp may play a role in cellulosome assembly.

Cellulosomes-structure and ultrastructure

The cellulosome is a macromolecular machine, whose components interact in a synergistic manner to catalyze the efficient degradation of cellulose. The cellulosome complex is composed of numerous kinds of cellulases and related enzyme subunits, which are assembled into the complex by virtue of a unique type of scaffolding subunit (scaffoldin). Each of the cellulosomal subunits consists of a multiple set of modules, two classes of which (dockerin domains on the enzymes and cohesin domains on scaffoldin) govern the incorporation of the enzymatic subunits into the cellulosome complex. Another scaffoldin module-the cellulose-binding domain-is responsible for binding to the substrate. Some cellulosomes appear to be tethered to the cell envelope via similarly intricate, multiple-domain anchoring proteins. The assemblage is organized into dynamic polycellulosomal organelles, which adorn the cell surface. The cellulosome dictates both the binding of the cell to the substrate and its extracellular decomposition to soluble sugars, which are then taken up and assimilated by normal cellular processes.

The crystal structure of the processive endocellulase CelF of Clostridium cellulolyticum in complex with a thiooligosaccharide inhibitor at 2.0 A resolution

The mesophilic bacterium Clostridium cellulolyticum exports multienzyme complexes called cellulosomes to digest cellulose. One of the three major components of the cellulosome is the processive endocellulase CelF. The crystal structure of the catalytic domain of CelF in complex with two molecules of a thiooligosaccharide inhibitor was determined at 2.0 A resolution. This is the first three-dimensional structure to be solved of a member of the family 48 glycosyl hydrolases. The structure consists of an (alpha alpha)6-helix barrel with long loops on the N-terminal side of the inner helices, which form a tunnel, and an open cleft region covering one side of the barrel. One inhibitor molecule is enclosed in the tunnel, the other exposed in the open cleft. The active centre is located in a depression at the junction of the cleft and tunnel regions. Glu55 is the proposed proton donor in the cleavage reaction, while the corresponding base is proposed to be either Glu44 or Asp230. The orientation of the reducing ends of the inhibitor molecules together with the chain translation through the tunnel in the direction of the active centre indicates that CelF cleaves processively cellobiose from the reducing to the non-reducing end of the cellulose chain.

Cellulose, cellulases and cellulosomes

The structural complexity and rigidity of cellulosic substrates have given rise to a phenomenal diversity of degradative enzymes--the cellulases. Cellulolytic microorganisms produce a wide variety of different catalytic and noncatalytic enzyme modules, which form the cellulases and act synergistically on their substrate. In some microbes, several types of cellulases are organized into an elaborate multifunctional supramolecular complex, known as the cellulosome. A combination of molecular genetic, biochemical, chemical, crystallographic and microscopic techniques are paving the way for new insights into both the structure of cellulose and the mechanisms of its hydrolysis.

Cloning and DNA sequencing of the genes encoding Clostridium josui scaffolding protein CipA and cellulase CelD and identification of their gene products as major components of the cellulosome

The Clostridium josui cipA and celD genes, encoding a scaffolding-like protein (CipA) and a putative cellulase (CelD), respectively, have been cloned and sequenced. CipA, with an estimated molecular weight of 120,227, consists of an N-terminal signal peptide, a cellulose-binding domain of family III, and six successive cohesin domains. The molecular architecture of C. josui CipA is similar to those of the scaffolding proteins reported so far, such as Clostridium thermocellum CipA, Clostridium cellulovorans CbpA, and Clostridium cellulolyticum CipC, but C. josui CipA is considerably smaller than the other scaffolding proteins. CelD consists of an N-terminal signal peptide, a family 48 catalytic domain of glycosyl hydrolase, and a dockerin domain. N-terminal amino acid sequence analysis of the C. josui cellulosomal proteins indicates that both CipA and CelD are major components of the cellulosome.

Properties of exgS, a gene for a major subunit of the Clostridium cellulovorans cellulosome

The nucleotide sequence of P70, one of the three major subunits of the Clostridium cellulovorans cellulosome, has been determined. The gene designated as exgS (Genbank Accession No. U34793) consists of 2112 bp and encodes a protein containing 703 amino acids with a molecular mass of 77.7 kDa. ExgS has a putative signal peptide sequence of 32 amino acids. The N-terminal region is separated from the C-terminal region by a short-Pro-Thr-Pro linker. The C-terminal region of ExgS contains a duplicated sequence (DS), each sequence consisting of 22 amino acids. exgS, located 67 bp downstream of cbpA in the chromosome, is immediately upstream of a gene encoding a family 9 type endoglucanase that we have designated as EngH. This gene cluster to date consists of regA-cbpA-exgS-engH. Recombinant ExgS (rExgS) containing no signal peptide was expressed in E. coli. The rExgS actively digested several forms of cellulose, including Avicel, Sigmacell101, crystalline cellulose, and xylan, but not carboxymethyl cellulose (CMC). Cellotetraose was the smallest oligosaccharide substrate for rExgS. The enzymatic studies indicated that ExgS was an exoglucanase and had some properties similar to that of CelS from C. thermocellum and CelF from C.cellulolyticum. An exoglucanase has now been found to be a component of the C. cellulovorans cellulosome as well as the previously reported endoglucanases.

CelG from Clostridium cellulolyticum: a multidomain endoglucanase acting efficiently on crystalline cellulose

The gene coding for CelG, a family 9 cellulase from Clostridium cellulolyticum, was cloned and overexpressed in Escherichia coli. Four different forms of the protein were genetically engineered, purified, and studied: CelGL (the entire form of CelG), CelGcat1 (the catalytic domain of CelG alone), CelGcat2 (CelGcat1 plus 91 amino acids at the beginning of the cellulose binding domain [CBD]), and GST-CBD(CelG) (the CBD of CelG fused to glutathione S-transferase). The biochemical properties of CelG were compared with those of CelA, an endoglucanase from C. cellulolyticum which was previously studied. CelG, like CelA, was found to have an endo cutting mode of activity on carboxymethyl cellulose (CMC) but exhibited greater activity on crystalline substrates (bacterial microcrystalline cellulose and Avicel) than CelA. As observed with CelA, the presence of the nonhydrolytic miniscaffolding protein (miniCipC1) enhanced the activity of CelG on phosphoric acid swollen cellulose (PASC), but to a lesser extent. The absence of the CBD led to the complete inactivation of the enzyme. The abilities of CelG and GST-CBD(CelG) to bind various substrates were also studied. Although the entire enzyme is able to bind to crystalline cellulose at a limited number of sites, the chimeric protein GST-CBD(CelG) does not bind to either of the tested substrates (Avicel and PASC). The lack of independence between the two domains and the weak binding to cellulose suggest that this CBD-like domain may play a special role and be either directly or indirectly involved in the catalytic reaction.

Characterization of the cellulolytic complex (cellulosome) produced by Clostridium cellulolyticum

The cellulolytic complex was isolated from Clostridium cellulolyticum grown on cellulose. Upon gel filtration, the complex was found to consist mainly of 600-kDa units, along with a 16-MDa aggregate. Its ability to degrade various substrates and its capacity to bind to the crystalline cellulose were measured. The results of sodium dodecyl sulfate-polyacrylamide gel electrophoresis, N-terminal sequencing, and blotting analysis showed that all of the known cellulases of this organism are present in this complex. Three major components were observed: the first component, a noncatalytic, large (160-kDa) protein, was identified based on its ability to bind to the dockerin-containing cellulases as scaffolding protein CipC. The other two components, which had molecular masses of 94 and 80.6 kDa, were identified as CelE and CelF, respectively. The identified cellulases and some other components of the cellulosome were able to bind to a miniCipC1 construct. In addition to providing an extensive description of the system, the results of the present study confirm that the dockerin-cohesin domain interaction plays an essential role in the constitution of the cellulosome.