Multi-detector row CT imaging of vertebral microstructure for evaluation of fracture risk

Bone density, geometry, microstructure, and stiffness: Relationships between peripheral and central skeletal sites assessed by DXA, HR-pQCT, and cQCT in premenopausal women

High-resolution peripheral quantitative computed tomography (HR-pQCT) is a new in vivo imaging technique for assessing 3D microstructure of cortical and trabecular bone at the distal radius and tibia. No studies have investigated the extent to which measurements of the peripheral skeleton by HR-pQCT reflect those of the spine and hip, where the most serious fractures occur. To address this research question, we performed dual-energy X-ray absorptiometry (DXA), central QCT (cQCT), HR-pQCT, and image-based finite-element analyses on 69 premenopausal women to evaluate relationships among cortical and trabecular bone density, geometry, microstructure, and stiffness of the lumbar spine, proximal femur, distal radius, and distal tibia. Significant correlations were found between the stiffness of the two peripheral sites (r = 0.86), two central sites (r = 0.49), and between the peripheral and central skeletal sites (r = 0.56-0.70). These associations were explained in part by significant correlations in areal bone mineral density (aBMD), volumetric bone mineral density (vBMD), and cross-sectional area (CSA) between the multiple skeletal sites. For the prediction of proximal femoral stiffness, vBMD (r = 0.75) and stiffness (r = 0.69) of the distal tibia by HR-pQCT were comparable with direct measurements of the proximal femur: aBMD of the hip by DXA (r = 0.70) and vBMD of the hip by cQCT (r = 0.64). For the prediction of vertebral stiffness, trabecular vBMD (r = 0.58) and stiffness (r = 0.70) of distal radius by HR-pQCT were comparable with direct measurements of lumbar spine: aBMD by DXA (r = 0.78) and vBMD by cQCT (r = 0.67). Our results suggest that bone density and microstructural and mechanical properties measured by HR-pQCT of the distal radius and tibia reflect the mechanical competence of the central skeleton.

High-resolution imaging techniques for the assessment of osteoporosis

The importance of assessing the bone's microarchitectural make-up in addition to its mineral density in the context of osteoporosis has been emphasized in several publications. The high spatial resolution required to resolve the bone's microstructure in a clinically feasible scan time is challenging. At present, the best suited modalities meeting these requirements in vivo are high-resolution peripheral quantitative imaging (HR-pQCT) and magnetic resonance imaging (MRI). Whereas HR-pQCT is limited to peripheral skeleton regions like the wrist and ankle, MRI can also image other sites like the proximal femur but usually with lower spatial resolution. In addition, multidetector computed tomography has been used for high-resolution imaging of trabecular bone structure; however, the radiation dose is a limiting factor. This article provides an overview of the different modalities, technical requirements, and recent developments in this emerging field. Details regarding imaging protocols as well as image postprocessing methods for bone structure quantification are discussed.

Vertebral fracture

Vertebral fractures are usually the first to occur in osteoporosis, provide indisputable evidence of reduced bone strength, and are frequently a harbinger of further vertebral and nonvertebral fracture. Radiologists are best placed to draw attention to the presence of vertebral fractures, most of which are clinically silent. Magnetic resonance imaging supplemented if necessary by computed tomography is usually sufficient to enable distinction between osteoporotic and non-osteoporotic vertebral fracture, without a need for percutaneous biopsy.

Deficiency of chemokine receptor CCR1 causes osteopenia due to impaired functions of osteoclasts and osteoblasts

Chemokines are characterized by the homing activity of leukocytes to targeted inflammation sites. Recent research indicates that chemokines play more divergent roles in various phases of pathogenesis as well as immune reactions. The chemokine receptor, CCR1, and its ligands are thought to be involved in inflammatory bone destruction, but their physiological roles in the bone metabolism in vivo have not yet been elucidated. In the present study, we investigated the roles of CCR1 in bone metabolism using CCR1-deficient mice. Ccr1(-/-) mice have fewer and thinner trabecular bones and low mineral bone density in cancellous bones. The lack of CCR1 affects the differentiation and function of osteoblasts. Runx2, Atf4, Osteopontin, and Osteonectin were significantly up-regulated in Ccr1(-/-) mice despite sustained expression of Osterix and reduced expression of Osteocalcin, suggesting a lower potential for differentiation into mature osteoblasts. In addition, mineralized nodule formation was markedly disrupted in cultured osteoblastic cells isolated from Ccr1(-/-) mice. Osteoclastogenesis induced from cultured Ccr1(-/-) bone marrow cells yielded fewer and smaller osteoclasts due to the abrogated cell-fusion. Ccr1(-/-) osteoclasts exerted no osteolytic activity concomitant with reduced expressions of Rank and its downstream targets, implying that the defective osteoclastogenesis is involved in the bone phenotype in Ccr1(-/-) mice. The co-culture of wild-type osteoclast precursors with Ccr1(-/-) osteoblasts failed to facilitate osteoclastogenesis. This finding is most likely due to a reduction in Rankl expression. These observations suggest that the axis of CCR1 and its ligands are likely to be involved in cross-talk between osteoclasts and osteoblasts by modulating the RANK-RANKL-mediated interaction.

High-resolution peripheral quantitative computed tomography can assess microstructural and mechanical properties of human distal tibial bone

High-resolution peripheral quantitative computed tomography (HR-pQCT) is a newly developed in vivo clinical imaging modality. It can assess the 3D microstructure of cortical and trabecular bone at the distal radius and tibia and is suitable as an input for microstructural finite element (microFE) analysis to evaluate bone's mechanical competence. In order for microstructural and image-based microFE analyses to become standard clinical tools, validation with a current gold standard, namely, high-resolution micro-computed tomography (microCT), is required. Microstructural measurements of 19 human cadaveric distal tibiae were performed for the registered HR-pQCT and microCT images, respectively. Next, whole bone stiffness, trabecular bone stiffness, and elastic moduli of cubic subvolumes of trabecular bone in both HR-pQCT and microCT images were determined by microFE analysis. The standard HR-pQCT patient protocol measurements, derived bone volume fraction (BV/TV(d)), trabecular number (Tb.N*), trabecular thickness (Tb.Th), trabecular spacing (Tb.Sp), and cortical thickness (Ct.Th), as well as the voxel-based direct measurements, BV/TV, Tb.N*, Tb.Th*, Tb.Sp*, Ct.Th, bone surface-to-volume ratio (BS/BV), structure model index (SMI), and connectivity density (Conn.D), correlated well with their respective gold standards, and both contributed to microFE-predicted mechanical properties in either single or multiple linear regressions. The mechanical measurements, although overestimated by HR-pQCT, correlated highly with their gold standards. Moreover, elastic moduli of cubic subvolumes of trabecular bone predicted whole bone or trabecular bone stiffness in distal tibia. We conclude that microstructural measurements and mechanical parameters of distal tibia can be efficiently derived from HR-pQCT images and provide additional information regarding bone fragility.

A new predictive index for vertebral fractures: the sum of the anterior vertebral body heights

Evaluation of osteoporotic vertebral fracture risk is currently based on measurement of bone mineral density (BMD), but bone strength depends also on bone quality parameters. Aim of this study was to evaluate the validity of a new vertebral morphometric index, the Anterior Vertebral Heights sum (AHs) in discriminating women at high risk of vertebral fracture, comparing its diagnostic accuracy with that of BMD measured at lumbar spine (LS-BMD) and femoral neck (FN-BMD).

MATERIALS AND METHODS

A total of 163 Caucasian post-menopausal women (age range 46-74 years, mean age+/-SD=63.8+/-7.1 years), who did not present prevalent fractures at baseline evaluation, were observed at longitudinal follow-up. X-ray of the thoracic and lumbar spine, LS-BMD and FN-BMD measurements were obtained in all patients at baseline and repeated at the second follow-up visit 18-24 months later (mean 21+/-1.7 months). Radiographs of spine were analysed in order to identify vertebral fractures using a visual semiquantitative method (SQ) and vertebral morphometry as well as by calculating the AHs morphometric index.

RESULTS

During follow-up, 21/163 patients (12.9%) sustained a new vertebral fracture; 95.2% (20/21) of fractured patients but only 4.9% (7/142) of non-fractured women had reduced AHs values. As regarding BMD, 66.6% (14/21) and 61.9% (13/21) of women with incident fracture were osteoporotic at lumbar spine and femoral neck baseline evaluation , whereas among non-fractured women, 38% (54/142) at LS-BMD and 33.1% (47/142) at FN-BMD were osteoporotic . Analyses of Receiver Operating Characteristic (ROC) curves showed that AHs discriminated vertebral fractures almost perfectly (AUC 0.97; 95% CI 0.95-0.99). On the other hand, the AUC for LS-BMD was only 0.73 (95% CI 0.64-0.81) and for FN-BMD was 0.72 (95%CI 0.63-0.80), showing that the diagnostic accuracy of AHs was significantly higher compared to that of LS-BMD (p<0.001) or FN-BMD (p<0.001). A modified Poisson regression model for binary data was used to assess the independent role of AHs in predicting vertebral fracture. The effect of AHs remained statistically significant (p<0.001) after adjusting by FN-BMD, age, weight and body height.

CONCLUSIONS

Results of this study indicate the validity of this new morphometric index in evaluating the risk of osteoporotic vertebral fractures thus suggesting that AHs should be considered a valid parameter in clinical practice to assess the need for primary prevention of vertebral fractures.

Quantifying the material and structural determinants of bone strength

The ability of a bone to resist fracture depends on the amount of bone present, the spatial distribution of the bone mass as cortical and trabecular bone and the intrinsic properties of the bone material. Whereas low areal bone mineral density (aBMD) predicts fractures, its sensitivity and specificity is low, as over 50% of fractures occur in persons without osteoporosis by BMD testing and most women with osteoporosis do not sustain a fracture. New non-invasive imaging techniques, including three-dimensional (3D) assessments of bone density and geometry, microarchitecture and integrated measurements of bone strength such as finite element analysis (FEA), provide estimates of bone strength that can be used to increase the sensitivity and specificity of fracture risk assessment. Initial observations have shown that these techniques provide information that will improve our understanding of the pathophysiology of skeletal fragility and suggest that these techniques are likely to have a role in the clinical management of individuals at risk for fracture.

Hormone predictors of abnormal bone microarchitecture in women with anorexia nervosa

Osteopenia is a complication of anorexia nervosa (AN) associated with a two- to three-fold increase in fractures. Nutritional deficits and hormonal abnormalities are thought to mediate AN-induced bone loss. Alterations in bone microarchitecture may explain fracture risk independent of bone mineral density (BMD). Advances in CT imaging now allow for noninvasive evaluation of trabecular microstructure at peripheral sites in vivo. Few data are available regarding bone microarchitecture in AN. We therefore performed a cross-sectional study of 23 women (12 with AN and 11 healthy controls) to determine hormonal predictors of trabecular bone microarchitecture. Outcome measures included bone microarchitectural parameters at the ultradistal radius by flat-panel volume CT (fpVCT); BMD at the PA and lateral spine, total hip, femoral neck, and ultradistal radius by dual energy X-ray absorptiometry (DXA); and IGF-I, leptin, estradiol, testosterone, and free testosterone levels. Bone microarchitectural measures, including apparent (app.) bone volume fraction, app. trabecular thickness, and app. trabecular number, were reduced (p<0.03) and app. trabecular spacing was increased (p=0.02) in AN versus controls. Decreased structural integrity at the ultradistal radius was associated with decreased BMD at all sites (p<or=0.05) except for total hip. IGF-I, leptin, testosterone, and free testosterone levels predicted bone microarchitecture. All associations between both IGF-I and leptin levels and bone microarchitectural parameters and most associations between androgen levels and microarchitecture remained significant after controlling for body mass index. We concluded that bone microarchitecture is abnormal in women with AN. Endogenous IGF-I, leptin, and androgen levels predict bone microarchitecture independent of BMI.

Analysis of hip geometry by clinical CT for the assessment of hip fracture risk in elderly Japanese women

Two case-control studies were designed to investigate the contribution of the geometry and bone mineral density (BMD) of the proximal femur to bone strength in Japanese elderly women. We also investigated whether clinical CT is useful to assess the risk of hip fracture. Subjects in the neck fracture study included 20 Japanese women with neck fracture (age: mean+/-SD; 80.1+/-4.5 years old) and 20 age-matched control women (79.2+/-2.6 years old). Subjects in the trochanteric fracture study included 16 Japanese women with trochanteric fracture (82.6+/-5.0 years old) and 16 age-matched control women (80.8+/-3.8 years old). CT examination of the proximal femur was performed between the date of admission and the date of surgery. The CT scanners used were an Aquillion 16 (Toshiba) and Somatom 64 (Siemens); the scanning conditions including spatial resolution and scanning energy were adjusted, and the same type of reference phantom containing hydroxyapatite was used. QCT PRO software (Mindways) was used to analyze data for BMD, geometry, and biomechanical parameters. Both the neck and trochanteric fracture cases had significantly lower total and cortical BMD, a significantly smaller cortical cross-sectional area (CSA), and a larger trabecular CSA. Both had significantly thinner cortex and smaller distance to center of bone mass, and women with trochanteric fracture had a significantly smaller cortical perimeter in the cross-sectional femoral neck. Women with neck fracture had a longer hip axis length (HAL) and women with trochanteric fracture had a significantly larger neck-shaft angle (NSA). Both groups had significantly lower cross-sectional moment of inertia (CSMI), and only women with neck fracture had a significantly higher buckling ratio (BR) compared to their respective controls. According to the multiple logistic regression analysis, women with neck fracture had a significantly longer HAL, lower CSMI, and higher BR, and women with trochanteric fracture had a significantly smaller cortical CSA of the femoral neck. We conclude that clinical CT may be useful for the assessment of the risk of neck and trochanteric fracture.

Inhomogeneity of rat vertebrae trabecular architecture by high-field 3D mu-magnetic resonance imaging and variable threshold image segmentation

PURPOSE

To analyze the 3D microarchitecture of rat lumbar vertebrae by micro-magnetic resonance imaging (micro-MRI).

MATERIALS AND METHODS

micro-MR images (20 x 20 x 20 microm(3) apparent voxel size) were acquired with a three-dimensional spin-echo pulse sequence on four lumbar vertebrae of two rats. Apparent microarchitectural parameters like trabecular bone fraction (BV/TV), specific bone surface (BS/TV), mean intercept length (MIL), and Euler number per unit volume (Euler density, E(V)) were calculated using a novel semiquantitative variable threshold segmentation technique. The threshold value T was obtained as a point of minimum or maximum of the function E(V) = E(V)(T).

RESULTS

Quantitative 3D analysis of micro-MRI images revealed a higher connectivity in the peripheral regions (E(V) = -570 +/- 70 mm(-3)) than in the central regions (E(V) = -130 +/- 50 mm(-3)) of the analyzed rat lumbar vertebrae. Smaller intertrabecular cavities and larger bone volume fractions were observed in peripheral regions as compared to central ones (MIL = 0.18 +/- 0.01 mm and 0.26 +/- 0.01 mm; BV/TV = 34 +/- 3% and 29 +/- 3%, respectively). The quantitative 3D study of MIL showed a structural anisotropy of the trabeculae along the longitudinal axis seen on the images. The inhomogeneity of the bone architecture was validated by micro-computed tomography (micro-CT) images at the same spatial resolution.

CONCLUSION

3D high-field micro-MRI is a suitable technique for the assessment of bone quality in experimental animal models.

Classification of trabeculae into three-dimensional rodlike and platelike structures via local inertial anisotropy

Trabecular bone microarchitecture is a significant determinant of the bone's mechanical properties and is thus of major clinical relevance in predicting fracture risk. The three-dimensional nature of trabecular bone is characterized by parameters describing scale, topology, and orientation of structural elements. However, none of the current methods calculates all three types of parameters simultaneously and in three dimensions. Here the authors present a method that produces a continuous classification of voxels as belonging to platelike or rodlike structures that determines their orientation and estimates their thickness. The method, dubbed local inertial anisotropy (LIA), treats the image as a distribution of mass density and the orientation of trabeculae is determined from a locally calculated tensor of inertia at each voxel. The orientation entropies of rods and plates are introduced, which can provide new information about microarchitecture not captured by existing parameters. The robustness of the method to noise corruption, resolution reduction, and image rotation is demonstrated. Further, the method is compared with established three-dimensional parameters including the structure-model index and topological surface-to-curve ratio. Finally, the method is applied to data acquired in a previous translational pilot study showing that the trabecular bone of untreated hypogonadal men is less platelike than that of their eugonadal peers.

Trabecular bone structure analysis in the osteoporotic spine using a clinical in vivo setup for 64-slice MDCT imaging: comparison to microCT imaging and microFE modeling

Assessment of trabecular microarchitecture may improve estimation of biomechanical strength, but visualization of trabecular bone structure in vivo is challenging. We tested the feasibility of assessing trabecular microarchitecture in the spine using multidetector CT (MDCT) on intact human cadavers in an experimental in vivo-like setup. BMD, bone structure (e.g., bone volume/total volume = BV/TV; trabecular thickness = Tb.Th; structure model index = SMI) and bone texture parameters were evaluated in 45 lumbar vertebral bodies using MDCT (mean in-plane pixel size, 274 microm(2); slice thickness, 500 microm). These measures were correlated with structure measures assessed with microCT at an isotropic spatial resolution of 16 microm and to microfinite element models (microFE) of apparent modulus and stiffness. MDCT-derived BMD and structure measures showed significant correlations to the density and structure obtained by microCT (BMD, R(2) = 0.86, p < 0.0001; BV/TV, R(2) = 0.64, p < 0.0001; Tb.Th, R(2) = 0.36, p < 0.01). When comparing microCT-derived measures with microFE models, the following correlations (p < 0.001) were found for apparent modulus and stiffness, respectively: BMD (R(2) = 0.58 and 0.66), BV/TV (R(2) = 0.44 and 0.58), and SMI (R(2) = 0.44 and 0.49). However, the overall highest correlation (p < 0.001) with microFE app. modulus (R(2) = 0.75) and stiffness (R(2) = 0.76) was achieved by the combination of QCT-derived BMD with the bone texture measure Minkowski Dimension. In summary, although still limited by its spatial resolution, trabecular bone structure assessment using MDCT is overall feasible. However, when comparing with microFE-derived bone properties, BMD is superior compared with single parameters for microarchitecture, and correlations further improve when combining with texture measures.

Role of trabecular microarchitecture in whole-vertebral body biomechanical behavior

The role of trabecular microarchitecture in whole-vertebral biomechanical behavior remains unclear, and its influence may be obscured by such factors as overall bone mass, bone geometry, and the presence of the cortical shell. To address this issue, 22 human T(9) vertebral bodies (11 female; 11 male; age range: 53-97 yr, 81.5 +/- 9.6 yr) were scanned with microCT and analyzed for measures of trabecular microarchitecture, BMC, cross-sectional area, and cortical thickness. Sixteen of the vertebrae were biomechanically tested to measure compressive strength. To estimate vertebral compressive stiffness with and without the cortical shell for all 22 vertebrae, two high-resolution finite element models per specimen-one intact model and one with the shell removed-were created from the microCT scans and virtually compressed. Results indicated that BMC and the structural model index (SMI) were the individual parameters most highly associated with strength (R(2) = 0.57 each). Adding microarchitecture variables to BMC in a stepwise multiple regression model improved this association (R(2) = 0.85). However, the microarchitecture variables in that regression model (degree of anisotropy, bone volume fraction) differed from those when BMC was not included in the model (SMI, mean trabecular thickness), and the association was slightly weaker for the latter (R(2) = 0.76). The finite element results indicated that the physical presence of the cortical shell did not alter the relationships between microarchitecture and vertebral stiffness. We conclude that trabecular microarchitecture is associated with whole-vertebral biomechanical behavior and that the role of microarchitecture is mediated by BMC but not by the cortical shell.

Assessment of trabecular bone structure using MDCT: comparison of 64- and 320-slice CT using HR-pQCT as the reference standard

Objectives

The aim of our study was to perform trabecular bone structure analysis with images from 64- and 320-slice multidetector computed tomography (MDCT) and to compare these with high-resolution peripheral computed tomography (HR-pQCT).

Materials and methods

Twenty human cadaver distal forearm specimens were imaged on a 64- and 320-slice MDCT system at 120 kVp, 200 mA and 135 kVp, 400 mA (in-plane pixel size 234 µm; slice thickness 500 µm). HR-pQCT imaging was performed at an isotropic voxel size of 41 µm. Bone volume fraction (BV/TV), trabecular number (Tb.N), thickness (Tb.Th) and separation (Tb.Sp) were computed.

Results

MDCT-derived BV/TV and Tb.Sp were highly correlated (r = 0.92–0.96, p < 0.0001) with the corresponding HR-pQCT parameters. Tb.Th was the only structure measure that did not yield any significant correlation.

Conclusion

The 64- and 320-slice MDCT systems both perform equally well in depicting trabecular bone architecture. However, because of constrained resolutions accurate derivation of trabecular bone measures is limited to only a subset of microarchitectural parameters.

Advances in osteoporosis imaging

In the assessment of osteoporosis, the measurement of bone mineral density (BMD(a)) obtained from dual energy X-ray absorptiometry (DXA; g/cm(2)) is the most widely used parameter. However, bone strength and fracture risk are also influenced by parameters of bone quality such as micro-architecture and tissue properties. This article reviews the radiological techniques currently available for imaging and quantifying bone structure, as well as advanced techniques to image bone quality. With the recent developments in magnetic resonance (MR) techniques, including the availability of clinical 3T scanners, and advances in computed tomography (CT) technology (e.g. clinical Micro-CT), in-vivo imaging of the trabecular bone architecture is becoming more feasible. Several in-vitro studies have demonstrated that bone architecture, measured by MR or CT, was a BMD-independent determinant of bone strength. In-vivo studies showed that patients with, and without, osteoporotic fractures could better be separated with parameters of bone architecture than with BMD. Parameters of trabecular architecture were more sensitive to treatment effects than BMD. Besides the 3D tomographic techniques, projection radiography has been used in the peripheral skeleton as an additional tool to better predict fracture risk than BMD alone. The quantification of the trabecular architecture included parameters of scale, shape, anisotropy and connectivity. Finite element analyses required highest resolution, but best predicted the biomechanical properties of the bone. MR diffusion and perfusion imaging and MR spectroscopy may provide measures of bone quality beyond trabecular micro-architecture.

Subsequent fracture after percutaneous vertebroplasty can be predicted on preoperative multidetector row CT

BACKGROUND AND PURPOSE

Subsequent fracture is often seen after percutaneous vertebroplasty. The purpose of this prospective study was to evaluate preoperative multidetector row CT (MDCT) for the prediction of subsequent fractures after vertebroplasty.

MATERIALS AND METHODS

This study included 26 consecutive patients (18 women and 8 men) with osteoporotic compression fractures (58 vertebrae). A 64-section MDCT with multiplanar reformation was obtained 1 day before the procedure. Subsequent MR imaging was used to evaluate new fractures at least 3 months after treatment on a routine basis or if there was recurrent pain. We used logistic regression analysis with MDCT findings and clinical data for statistical evaluation according to the location of new fractures.

RESULTS

Subsequent fractures were noted at 14 adjacent vertebrae (12.1%) in 13 patients and at 14 remote vertebrae in 6 patients (23.1%). Subsequent fractures in adjacent vertebrae tended to occur in small vertebrae before treatment (P < .05). Steroid medication and low CT value in nonfractured vertebrae were associated with subsequent fractures in remote vertebrae (P < .05). Further collapse of the treated vertebral bodies was noted in 10 patients (11 vertebrae [19.0%]) without specific findings (P > .05).

CONCLUSIONS

The small size of the treated vertebrae may relate to subsequent fractures in adjacent vertebrae. Steroid use and low CT value of nonfractured vertebrae on preoperative MDCT can be associated with subsequent fractures in remote vertebrae.

Assessment of trabecular bone structure of the calcaneus using multi-detector CT: correlation with microCT and biomechanical testing

The prediction of bone strength can be improved when determining bone mineral density (BMD) in combination with measures of trabecular microarchitecture. The goal of this study was to assess parameters of trabecular bone structure and texture of the calcaneus by clinical multi-detector row computed tomography (MDCT) in an experimental in situ setup and to correlate these parameters with microCT (microCT) and biomechanical testing. Thirty calcanei in 15 intact cadavers were scanned using three different protocols on a 64-slice MDCT scanner with an in-plane pixel size of 208 microm and 500 microm slice thickness. Bone cores were harvested from each specimen and microCT images with a voxel size of 16 microm were obtained. After image coregistration, trabecular bone structure and texture were evaluated in identical regions on the MDCT images. After data acquisition, uniaxial compression testing was performed. Significant correlations between MDCT- and microCT-derived measures of bone volume fraction (BV/TV), trabecular thickness (Tb.Th) and trabecular separation (Tb.Sp) were found (range, R(2)=0.19-0.65, p<0.01 or 0.05). The MDCT-derived parameters of volumetric BMD, app. BV/TV, app. Tb.Th and app. Tb.Sp were capable of predicting 60%, 63%, 53% and 25% of the variation in bone strength (p<0.01). When combining those measures with one additional texture index (either GLCM, TOGLCM or MF.euler), prediction of mechanical competence was significantly improved to 86%, 85%, 71% and 63% (p<0.01). In conclusion, this study showed the feasibility of trabecular microarchitecture assessment using MDCT in an experimental setup simulating the clinical situation. Multivariate models of BMD or structural parameters combined with texture indices improved prediction of bone strength significantly and might provide more reliable estimates of fracture risk in patients.

Coordination of PGC-1beta and iron uptake in mitochondrial biogenesis and osteoclast activation

Osteoclasts are acid-secreting polykaryons that have high energy demands and contain abundant mitochondria. How mitochondrial biogenesis is integrated with osteoclast differentiation is unknown. We found that the transcription of Ppargc1b, which encodes peroxisome proliferator-activated receptor-gamma coactivator 1beta (PGC-1beta), was induced during osteoclast differentiation by cAMP response element-binding protein (CREB) as a result of reactive oxygen species. Knockdown of Ppargc1b in vitro inhibited osteoclast differentiation and mitochondria biogenesis, whereas deletion of the Ppargc1b gene in mice resulted in increased bone mass due to impaired osteoclast function. We also observed defects in PGC-1beta-deficient osteoblasts. Owing to the heightened iron demand in osteoclast development, transferrin receptor 1 (TfR1) expression was induced post-transcriptionally via iron regulatory protein 2. TfR1-mediated iron uptake promoted osteoclast differentiation and bone-resorbing activity, associated with the induction of mitochondrial respiration, production of reactive oxygen species and accelerated Ppargc1b transcription. Iron chelation inhibited osteoclastic bone resorption and protected against bone loss following estrogen deficiency resulting from ovariectomy. These data establish mitochondrial biogenesis orchestrated by PGC-1beta, coupled with iron uptake through TfR1 and iron supply to mitochondrial respiratory proteins, as a fundamental pathway linked to osteoclast activation and bone metabolism.

Implications of resolution and noise for in vivo micro-MRI of trabecular bone

Osteoporotic bone loss is accompanied by impaired structural integrity of the trabecular network, leading to a decrease in the overall mechanical properties of the bone. The development of the "virtual bone biopsy" (VBB), a method combining magnetic resonance microimaging (microMRI) and digital image processing techniques, has previously been shown to quantify topology and scale of human trabecular bone noninvasively. The aim of this work was to determine the extent to which structural parameters derived from images acquired in the limited spatial resolution regime of in vivo imaging are sensitive to resolution and noise and further, whether under these conditions, a small amount of bone loss and its associated structural manifestations can be detected. Toward these goals 3D models of trabecular bone representing multiple anatomic locations were generated on the basis of microCT images of human cadaveric bone cores. These images were binarized and the resulting data arrays representing pure bone (proton density=0) and pure marrow (proton density=255) subjected to simulated MR imaging by Cartesian sampling of k space, yielding, after 3D Fourier reconstruction, voxel sizes currently achievable in vivo. Subsequently, realistic levels of Gaussian noise were superimposed on the complex data and magnitude images were computed. The resulting images were subsequently VBB processed for a range of signal-to-noise ratio (SNR) values and image voxel sizes. For comparison of the predicted behavior to in vivo data, images from a recent patient study were evaluated as well. Systematic changes of the derived structural parameters changing progressively with decreasing SNR were noted, and it is shown that the errors are correctable using simple linear transformations, thereby allowing the data to be normalized. The predicted dependence of the structural parameters on SNR also closely parallel those observed in vivo. Finally, in order to assess the sensitivity of the VBB processing algorithms to detect bone loss during disease progression or regression in response to treatment, the high-resolution specimen data were subjected to 5% bone loss either by homogeneous or heterogeneous erosion and microMR images simulated at in vivo resolution and SNR. At typical in vivo SNR (SNR=12) and effective image resolution (160 microm isotropic and 137 x 137 X 410 microm3), VBB algorithms were able to detect the structural implications of a 5% loss in bone volume fraction with high statistical significance.

High resolution computed tomography of the vertebrae yields accurate information on trabecular distances if processed by 3D fuzzy segmentation approaches

INTRODUCTION

The structure of trabecular bone represents an aspect of bone properties that affects vertebral bone strength independently of bone mineral density [M. Kleerekoper, A. Villanueva, J. Stanciu, D. Rao, and A. Parfitt. The role of three-dimensional trabecular microstructure in the pathogenesis of vertebral compression fractures. Calcif. Tissue Int., 37:594-597, Dec 1985; E. Seeman and P. Delmas. Bone quality-the material and structural basis of bone strength and fragility. N. Engl. J. Med., 354:2250-2261, May 2006.]. Using the mathematical concept of fuzzy distance transformation (FDT), we evaluated the accuracy of measurements of trabecular distance (Tb.Di(f)) which can be determined for vertebrae in vivo using high resolution computed tomography (HRCT).

METHODS

In a first step extrema voxels with a very high likelihood of representing bone or marrow are identified. A probability level of being a bone voxel is assigned to all other voxel. This probability is based on the FDT of the voxel's gray-level, preprint submitted to Elsevier June 10, 2008; revised July 15, 2008 i.e. the shortest gray-value weighted distance to the marrow background. Next, the resulting bone structure is skeletonized. The space between the ridges of the skeleton is filled with the largest possible spheres. The average over the radii of the spheres defines Tb.Di(f), a measure of trabecular distance. 14 whole vertebrae embedded in polymethyl methylacrylate were scanned by HRCT (voxel size 156 x 156 x 400 mum(3)) inside an anthropomorphic abdomen phantom. Scans obtained on Scanco Xtreme CT (XCT, voxel size 82(3) microm(3)) without the phantom were used as reference.

RESULTS

Tb.Di(f) calculated on XCT data were almost identical to trabecular distance values (1/Tb.N*) determined with the manufacturer's standard software (r(2)=0.98). Tb.Di(f) values obtained with HRCT correlated strongly with Tb.Di(f) values obtained by XCT (r(2)=0.89). Over the range from 400 to 1400 microm trabecular distance could be estimated with a residual error of 78 microm.

CONCLUSIONS

The FDT based variable Tb.Di(f) provides 3D estimates of trabecular distances with residual errors of less than 100 microm using a HRCT protocol which also can be employed in vivo for assessing vertebral microarchitecture.

Imaging of metabolic bone diseases

Osteoporosis is a serious public health problem. The incidence of osteoporotic fractures increases with age. As life expectancy increases, social costs associated with osteoporotic fractures will multiply exponentially. The early diagnosis of osteoporosis, thanks to evermore precise devices, becomes, therefore, fundamental to prevent complications of disease and unnecessary suffering.

Trabecular bone structure analysis in the limited spatial resolution regime of in vivo MRI

RATIONALE AND OBJECTIVES

To develop a method for processing and visualization of trabecular bone networks on the basis of magnetic resonance (MR) images acquired in the limited spatial resolution regime of in vivo imaging at which trabecular thickness is comparable to voxel size.

MATERIALS AND METHODS

A sequence of processing steps for analyzing the topologic structure of trabecular bone networks is presented and evaluated using three types of datasets: images of synthetic structures with various levels of superimposed Gaussian noise, micro-computed tomographic images of human trabecular bone downsampled to in vivo resolution, and in vivo micro-MR images from a prior longitudinal study investigating the structural implications of testosterone treatment of hypogonadal men. The simulated images were analyzed at a voxel size of 150 microm(3), the clinical MR image data had been acquired with 137 x 137 x 410 microm(3) voxel size. The technique is a modification to the virtual bone biopsy processing chain that involves a sinc convolution step immediately preceding binarization, and employs the Manzanera-Bernard thinning algorithm for obtaining the three-dimensional skeleton before topologic classification. The detectability of plate and rod bone elements was also analyzed theoretically.

RESULTS

As compared with previously published techniques, the approach produced a more accurate bone skeleton in the micro-computed tomographic and simulation experiments, with clear improvement in preservation of rod and plate elements. Simulations suggest that rods are detectable down to a diameter of approximately 50% of the MR image voxel length, whereas plates can be detected at thicknesses of 20% or more of voxel length. For in vivo studies, it was shown that the method could recover the treatment response in terms of the ensuing topologic changes in patients undergoing antiresorptive treatment.

CONCLUSIONS

The algorithm for processing of in vivo micro-MR images of trabecular bone is superior to prior approaches in preserving the topology of the network in the presence of noise.

Feasibility of measuring trabecular bone structure of the proximal femur using 64-slice multidetector computed tomography in a clinical setting

We studied the feasibility of cancellous bone structure assessment of the proximal femur using multidetector computed tomography (MDCT) in an simulated in vivo experimental model. The proximal femur of 15 intact human cadavers was examined using 64-row MDCT using a thin-section protocol with an in-plane spatial resolution of 273 mum. High-resolution peripheral quantitative computed tomography (HR-pQCT) of the isolated specimens with a voxel size of 82 mum served as a standard of reference. Trabecular bone structure and optimized textural parameters were calculated in MDCT images and compared to measures obtained by HR-pQCT. Significant correlations between MDCT- and HR-pQCT-derived values for bone fraction (r = 0.87), trabecular separation (r = 0.66), and number (r = 0.53) were found. Parameters derived from textural analysis performed better in predicting trabecular separation (up to r = 0.86) and number (up to r = 0.83). Trabecular thickness could not be quantified correctly using MDCT, most likely due to its limited resolution. Individual parameters for assessement of trabecular microarchitecture can be measured using MDCT-derived imaging studies and a simulated in vivo setup. Thus, in vivo assessment of bone architecture in addition to BMD may be feasible in clinical practice.

Bone mass and architecture determination: state of the art

Bone fracture occurs when the bone strength (i.e. the ability of the bone to resist a force) is less than the force applied to the bone. In the elderly, falls represent the more severe forces applied to bone. Bone density is a good marker of bone strength, and has been used widely in this respect. Nevertheless, many aspects of bone strength cannot be explained by bone density alone. For this reason there has been increasing interest in studying architectural parameters of bone, beyond bone density, which may affect bone strength. Macro-architectural parameters include e.g. bone size and geometry assessed with techniques such as radiography, dual-energy x-ray absorptiometry (DXA), peripheral quantitative computed tomography (QCT), computed tomography (CT) and magnetic resonance imaging (MRI). Micro-architectural parameters include fine cortical and trabecular structural detail which can be evaluated using high-resolution imaging techniques such as multidetector CT, MRI, and high-resolution peripheral QCT. These techniques are providing a great deal of new information on the physiological architectural responses of bone to aging, weightlessness, and treatment. This will ultimately lead to the prediction of fracture risk being improved through a combined assessment of bone density and architectural parameters.

Reproducibility of CT-based bone texture parameters of cancellous calf bone samples: Influence of slice thickness

Bone microarchitecture is an important determinant of the fracture risk, independently of bone mineral density. At present, bone biopsy is required for microarchitecture assessment, and accessible non-invasive techniques are needed. In this study, we tested the short-term reproducibility and parameter changes of a non-invasive method for microarchitecture assessment with a medical computed tomography. Texture parameters (run lengths and co-occurrence) were extracted from bone sample images. Reproducibility and the influence of slice thickness (1, 3, 5 and 8mm) were also studied. After five repositionings, short-term reproducibility was found to be good. All run length parameters but one fell significantly with increasing slice thickness. Co-occurrence parameters showed different patterns of change. Short-term coefficients of variation of texture parameters used to assess bone microarchitecture were similar to those obtained elsewhere with other techniques. The results were influenced by slice thicknesses, emphasizing the importance of the conditions of acquisition.

Advanced CT bone imaging in osteoporosis

Non-invasive and/or non-destructive techniques can provide structural information about bone, beyond simple bone densitometry. While the latter provides important information about osteoporotic fracture risk, many studies indicate that BMD only partly explains bone strength. Quantitative assessment of macro- and microstructural features may improve our ability to estimate bone strength. Methods for quantitatively assessing macrostructure include (besides conventional radiographs) DXA and CT, particularly volumetric quantitative CT (vQCT). Methods for assessing microstructure of trabecular bone non-invasively and/or non-destructively include high-resolution CT (hrCT), microCT (μCT), high-resolution magnetic resonance (hrMR) and microMR (μMR). vQCT, hrCT and hrMR are generally applicable in vivo; μCT and μMR are principally applicable in vitro. Despite recent progress made with these advanced imaging techniques, certain issues remain. The important balances between spatial resolution and sampling size, or between signal-to-noise and radiation dose or acquisition time, need further consideration, as do the complexity and expense of the methods vs their availability and accessibility. Clinically, the challenges for bone imaging include balancing the advantages of simple bone densitometry vs the more complex architectural features of bone or the deeper research requirements vs the broader clinical needs. The biological differences between the peripheral appendicular skeleton and the central axial skeleton must be further addressed. Finally, the relative merits of these sophisticated imaging techniques must be weighed with respect to their applications as diagnostic procedures, requiring high accuracy or reliability, compared with their monitoring applications, requiring high precision or reproducibility.

Technology insight: noninvasive assessment of bone strength in osteoporosis

Fractures that result from osteoporosis are an enormous and growing concern for public health systems; as the population ages, the number of fractures worldwide will double or triple in the next 50 years. The ability of a bone to resist fracture depends not only on the amount of bone present, but also on the spatial distribution of the bone mass, the cortical and trabecular microarchitecture, and the intrinsic properties of the materials that comprise the bone. Although low bone mineral density is one of the strongest risk factors for fracture, a number of clinical studies have demonstrated the limitations of using measurements of areal bone mineral density by dual-energy X-ray absorptiometry to assess fracture risk and to monitor responses to therapy. As a result, new, noninvasive imaging techniques that are capable of assessing various components of bone strength are being developed. These techniques include three-dimensional assessments of bone density, geometry and microarchitecture, as well as integrated measurements of bone strength by engineering analyses. Although they show strong potential, further development and validation of these techniques is needed to define their role in the clinical management of individuals with osteoporosis.

Does thoracic or lumbar spine bone architecture predict vertebral failure strength more accurately than density?

Trabecular bone microstructure was studied in 6 mm bone biopsies taken from the 10th thoracic and 2nd lumbar vertebra of 165 human donors and shown to not differ significantly between these sites. Microstructural parameters at the locations examined provided only marginal additional information to quantitative computed tomography in predicting experimental failure strength.

INTRODUCTION

It is unknown whether trabecular microstructure differs between thoracic and lumbar vertebrae and whether it adds significant information in predicting the mechanical strength of vertebrae in combination with QCT-based bone density.

METHODS

Six mm cylindrical biopsies taken at mid-vertebral level, anterior to the center of the thoracic vertebra (T) 10 and the lumbar vertebra (L) 2 were studied with micro-computed tomography (microCT) in 165 donors (age 52 to 99 years). The segment T11-L1 was examined with QCT and tested to failure using a testing machine.

RESULTS

The correlation of microstructural properties was moderate between T10 and L2 (r <or= 0.5). No significant differences were observed in the microstructural properties between the thoracic and lumbar spine, nor were sex differences at T10 or L2 observed. Cortical/subcortical density of T12 (r(2)=48%) was more strongly correlated with vertebral failure stress than trabecular density (r(2)=32%). BV/TV (of T10) improved the prediction by 52% (adjusted r(2)) in a multiple regression model.

CONCLUSION

Microstructural properties of trabecular bone biopsies displayed a high degree of heterogeneity between vertebrae but did not differ significantly between the thoracic and lumbar spine. At the locations examined, bone microstructure only marginally improved the prediction of structural vertebral strength beyond QCT-based bone density.

Resolution dependence of the non-metric trabecular structure indices

Non-metric indices of topological features of trabecular bone structure, such as structure model index (SMI), connectivity density (Conn.D), and degree of anisotropy (DA), provide unique information relevant to bone quality. With recent technological advancement, in vivo assessment of these indices may be possible from images acquired using high-resolution imaging techniques such as high-resolution peripheral quantitative computed tomography (HR-pQCT). However, more detailed investigation of the dependence of non-metric indices on spatial resolution is needed to determine their applicability. The purpose of this study was to determine whether these three non-metric indices are affected by the spatial resolution of CT images. First, the SMI, Conn.D, and DA were calculated for trabecular bone specimens with varying plate-like and rod-like structures from resampled muCT images across a range of spatial resolutions and compared to the reference values. To account for differences in size across different species and anatomical sites, the results are reported in normalized resolution units. Next, the impact of resolution on the non-metric indices for cores of human distal tibia trabecular bone from clinical HR-pQCT images was evaluated to determine the applicability of the non-metric indices to in vivo imaging. We found that the non-metric indices of trabecular bone structure were affected by spatial resolution of CT images. Particularly, the SMI deviated from the high-resolution muCT reference value depending on the structure type, whether plate-like or rod-like. Both Conn.D and DA were underestimated in the images obtained at an in vivo resolution. It is not trivial to determine absolute threshold for validity of these non-metric indices without considering a specific study design (e.g. relative resolution, the size of the treatment effect to detect, and specimen type). The results of this study provide an upper bound for the accuracy of the non-metric indices under limited resolution scenarios.

Advanced imaging of bone macrostructure and microstructure in bone fragility and fracture repair

Research into the molecular and cellular pathways focusing on bone fragility and fracture-healing has led to new potential treatments to aid in fracture-healing. This research has focused on physical as well as biological modes of treatment. As new products and methods are derived, it is essential to develop effective and sensitive noninvasive means by which early changes in the fracture repair process can be detected. Specialized noninvasive and/or nondestructive techniques can provide structural information about local and systemic skeletal health, the propensity to fracture, and the pathophysiology of bone fragility. The methods available to quantitatively assess macrostructure include computed tomography and, particularly, volumetric quantitative computed tomography. Methods for assessing microstructure of trabecular bone include high-resolution computed tomography, microquantitative computed tomography, high-resolution magnetic resonance imaging, and micromagnetic resonance imaging. These new techniques help to illustrate the process of fracture-healing by defining the skeletal response to innovative therapies and assessing biomechanical relationships. This review presents perspectives on the advanced imaging modalities that are currently available and on recent developments that may improve the detection and understanding of bone fragility and fracture-healing.

Life-long caloric restriction reveals biphasic and dimorphic effects on bone metabolism in rodents

Caloric restriction (CR) extends the lifespan of various organisms and slows the onset of age-related disorders; however, little is known about the long-term effects of CR per se on bone. In the present study, we have examined the effects of life-long CR vs. ad libitum (AD) feeding, mainly on the trabecular bone of proximal tibiae in male C57BL/6 mice and F344 rats. Micro-computed tomography scanning of tibiae revealed that CR for 3-9 months caused a substantial decrease in three-dimensional bone volume with structural derangements. Bone histomorphometry revealed the reduced bone mass was due mainly to suppression of bone formation. In db/db mice with defective leptin receptor, CR was unable to decrease bone mass and suppress bone formation. The effect of CR on bone mass was inhibited by administration of a beta-adrenergic blocker, propranolol. Thus, CR may regulate bone formation through leptin signaling and elevated sympathetic nervous tone. Interestingly, the difference in bone volume between the CR and AD groups disappeared after 1 yr of age, and mice and rats on an additional extension of CR to natural death maintained higher bone mass than the AD groups, with reduced bone turnover, suggesting that CR slows skeletal aging by regulating the rate of bone turnover. This is the first report, to our knowledge, that has examined the effects of lifelong CR on bone metabolism and trabecular microstructure and documents its contrasting effects during maturation vs. the postmaturational, involutional period.

Trabecular structure quantified with the MRI-based virtual bone biopsy in postmenopausal women contributes to vertebral deformity burden independent of areal vertebral BMD

In postmenopausal women with a wide range of vertebral deformities, MRI-based structural measures of topology and scale at the distal radius are shown to account for as much as 30% of vertebral deformity, independent of integral vertebral BMD.

INTRODUCTION

Trabecular bone architecture has been postulated to contribute to overall bone strength independent of vertebral BMD measured by DXA. However, there has thus far been only sparse in vivo evidence to support this hypothesis.

MATERIALS AND METHODS

Postmenopausal women, 60-80 yr of age, were screened by DXA, and those with T-scores at either the hip or spine falling within the range of -2.5 +/- 1.0 were studied with the MRI-based virtual bone biopsy, along with heel broadband ultrasound absorption and pQCT of the tibia. The data from 98 subjects meeting the enrollment criteria were subjected to microMRI at the distal tibia and radius, and measures of topology and scale of the trabecular bone network were computed. A spinal deformity index (SDI) was obtained from morphometric measurements in midline sagittal MR images of the thoracic and lumbar spine to evaluate associations between structure and deformity burden.

RESULTS

A number of structural indices obtained at the distal radius were correlated with the SDI. Among these were the topological surface density (a measure of trabecular plates) and trabecular bone volume fraction, which were inversely correlated with SDI (p < 0.0001). Combinations of two structural parameters accounted for up to 30% of the variation in SDI (p < 0.0001) independent of spinal BMD, which was not significantly correlated. pQCT trabecular BMD was also weakly associated, whereas broadband ultrasound absorption was not. No significant association between SDI and structural indices were found at the tibia.

CONCLUSIONS

Structural measures at the distal radius obtained in vivo by microMRI explained a significant portion of the variation in total spinal deformity burden in postmenopausal women independent of areal BMD.

Micro-CT imaging analysis for the effect of celecoxib, a cyclooxygenase-2 inhibitor, on inflammatory bone destruction in adjuvant arthritis rats

Cyclooxygenase (COX)-2 is known to play an important role in the differentiation and maturation of osteoclasts. However, the role of COX-1 in bone metabolism has not been well explored. In this study, the bone-conserving effects of COX-2-specific (celecoxib), COX-nonselective (loxoprofen), and COX-1-specific agents (SC-58560) were compared using an adjuvant-induced arthritis (AIA) rat model. Arthritis was induced by injecting 50 microl liquid paraffin containing 1 mg Mycobacterium butyricum into the left footpad of Lewis rats. Drugs were given orally twice daily for 10 days beginning 15 days after adjuvant injection. Celecoxib was administered at the rate of 3 mg/kg per day, loxoprofen at 3 mg/kg per day, and SC-58560 at 10 mg/kg per day. The therapeutic effects on 3-D architectural bone changes in the arthritic condition, e.g., the bone volume/total tissue volume ratio and the amount of trabecular bone pattern factor, were determined by analyzing the hindpaw calcaneus of AIA rats using microcomputed tomography (micro-CT). In addition, dual-energy X-ray absorptiometry 2-D bone analysis was performed to compare with micro-CT analysis. AIA rats are prone to substantial bone erosion, which allows for significant changes in the 3-D architectural index. This inflammatory bone destruction was suppressed potently by celecoxib, only moderately by loxoprofen, and not at all by SC-58560. These data suggest that COX-2 plays an important role in the inflammatory bone destruction that occurs with rheumatoid arthritis. The results also suggest that COX-2 is more effective than COX-1 at suppressing the destruction of bone associated with arthritis.

Structural determinants of vertebral fracture risk

Vertebral fractures are more strongly associated with specific bone density, structure, and strength parameters than with areal BMD, but all of these variables are correlated.

INTRODUCTION

It is unclear whether the association of areal BMD (aBMD) with vertebral fracture risk depends on bone density per se, bone macro- or microstructure, overall bone strength, or spine load/bone strength ratios.

MATERIALS AND METHODS

From an age-stratified sample of Rochester, MN, women, we identified 40 with a clinically diagnosed vertebral fracture (confirmed semiquantitatively) caused by moderate trauma (cases; mean age, 78.6 +/- 9.0 yr) and compared them with 40 controls with no osteoporotic fracture (mean age, 70.9 +/- 6.8 yr). Lumbar spine volumetric BMD (vBMD) and geometry were assessed by central QCT, whereas microstructure was evaluated by high-resolution pQCT at the ultradistal radius. Vertebral failure load ( approximately strength) was estimated from voxel-based finite element models, and the factor-of-risk (phi) was determined as the ratio of applied spine loads to failure load.

RESULTS

Spine loading (axial compressive force on L3) was similar in vertebral fracture cases and controls (e.g., for 90 degrees forward flexion, 2639 versus 2706 N; age-adjusted p = 0.173). However, fracture cases had inferior values for most bone density and structure variables. Bone strength measures were also reduced, and the factor-of-risk (phi) was 35-37% greater (worse) among women with a vertebral fracture. By age-adjusted logistic regression, relative risks for the strongest fracture predictor in each of the five main variable categories were bone density (total lumbar spine vBMD: OR per SD change, 2.2; 95% CI, 1.1-4.3), bone geometry (vertebral apparent cortical thickness: OR, 2.1; 95% CI, 1.1-4.1), bone microstructure (none significant); bone strength ("cortical" [outer 2 mm] compressive strength: OR, 2.5; 95% CI, 1.3-4.8), and factor-of-risk (phi for 90 degrees forward flexion/overall vertebral compressive strength: OR, 3.2; 95% CI, 1.4-7.5). These variables were correlated with spine aBMD (partial r, -0.32 to 0.75), but each was a stronger predictor of fracture in the logistic regression analyses.

CONCLUSIONS

The association of aBMD with vertebral fracture risk is explained by its correlation with more specific bone density, structure, and strength parameters. These may allow deeper insights into fracture pathogenesis.

Regional variation in vertebral bone morphology and its contribution to vertebral fracture strength

Vertebral fractures may result in pain, loss of height, spinal instability, kyphotic deformity and ultimately increased morbidity. Fracture risk can be estimated by vertebral bone mineral density (BMD). However, vertebral fractures may be better defined by more selective methods that account for micro-architecture. Our aim was to quantify regional variations in bone architecture parameters (BAPs) and to assess the degree with which regional variations in BAPs affect vertebral fracture strength. The influence of disc health and endplate thickness on fracture strength was also determined. The soft tissue and posterior elements of 20 human functional spine units (FSU) were removed (T9 to L5, mean 74.45+/-4.25 years). After micro-CT scanning of the entire FSU, the strength of the specimens was determined using a materials testing system. Specimens were loaded in compression to failure. BAPs were assessed for 10 regions of the vertebral cancellous bone. Disc health (glycosaminoglycan content of the nucleus pulposus) was determined using the degree of binding with Alcian Blue. Vertebrae were not morphologically homogeneous. Posterior regions of the vertebrae had greater bone volume, more connections, reduced trabecular separation and more plate-like isotropic structures than their corresponding anterior regions. Significant heterogeneity also exists between posterior superior and inferior regions (BV/TV: posterior superior 12.6+/-2.8%, inferior 14.6+/-3%; anterior superior 10.5+/-2.2%, inferior 10.7+/-2.4%). Of the two endplates that abutted a common disc, the cranial inferior endplate was thicker (0.44+/-0.15 mm) than the caudal superior endplate (0.37+/-0.13 mm). Our study found good correlations between BV/TV, connective density and yield strength. Fracture risk prediction, using BV/TV multiplied by the cross sectional area of the endplate, can be improved through regional analysis of the underlying cancellous bone of the endplate of interest (R(2) 0.78) rather than analysis of the entire vertebra (R(2) 0.65) or BMD (R(2) 0.47). Degenerated discs lack a defined nucleus. A negative linear relationship between disc health and vertebral strength (R(2) 0.70) was observed, likely due to a shift in loading from the weaker anterior vertebral region to the stronger posterior region and cortical shell. Our results show the importance of considering regional variations in cancellous BAPs and disc health when assessing fracture risk.

Monitoring teriparatide-associated changes in vertebral microstructure by high-resolution CT in vivo: results from the EUROFORS study

We introduce a method for microstructural analysis of vertebral trabecular bone in vivo based on HRCT. When applied to monitor teriparatide treatment, changes in structural variables exceeded and were partially independent of changes in volumetric BMD.

INTRODUCTION

Monitoring of osteoporosis therapy based solely on bone densitometry is insufficient to assess anti-fracture efficacy. Assessing bone microstructure in vivo is therefore of importance. We studied whether it is possible to monitor effects of teriparatide on vertebral trabecular microstructure independent of BMD by high-resolution CT (HRCT).

MATERIALS AND METHODS

In a subset of 65 postmenopausal women with established osteoporosis who participated in the EUROFORS study, HRCT scans of T(12), quantitative CT of L(1)-L(3), and DXA of L(1)-L(4) were performed after 0, 6, and 12 mo of teriparatide treatment (20 microg/d). We compared BMD and 3D microstructural variables in three groups of women, based on prior antiresorptive treatment: treatment-naïve; pretreated; and pretreated women showing inadequate response to treatment.

RESULTS

We found statistically highly significant increases in most microstructural variables and BMD 6 mo after starting teriparatide. After 12 mo, apparent bone volume fraction (app. BV/TV) increased by 30.6 +/- 4.4% (SE), and apparent trabecular number (app. Tb.N.) increased by 19.0 +/- 3.2% compared with 6.4 +/- 0.7% for areal and 19.3 +/- 2.6% for volumetric BMD. The structural changes were partially independent of BMD as shown by a significantly larger standardized increase and a standardized long-term precision at least as good as DXA. Patients who had shown inadequate response to prior osteoporosis treatment did show improvements in BMD and structural measures comparable to treatment-naïve patients.

CONCLUSIONS

HRCT is a feasible method for longitudinal microstructural analysis of human vertebrae in vivo, offers information beyond BMD, and is sufficiently precise to show profound effects of teriparatide after 12 mo.

Analysis of trabecular bone structure with multidetector spiral computed tomography in a simulated soft-tissue environment

We investigated the influence of soft tissue (ST) on image quality by high-resolution multidetector computed tomography (MDCT) scans and assessed the effect of surrounding ST on the quantification of trabecular bone structure. Eight bone cores obtained from human proximal femoral heads discarded during hip replacement surgery were scanned with micro-computed tomography (microCT) as well as with MDCT both without (w/o) and with (w) simulated surrounding ST, where a phantom imitated a human torso. Signal-to-noise ratio (SNR) and contrast-to-noise ratio (CNR) were measured in all scans. Apparent trabecular bone structure parameters were calculated and compared to similar parameters obtained in coregistered sections of the microCT scans. Residual errors were calculated as root-mean-square (RMS) errors relative to the microCT measurements. Compared to microCT results, trabecular structure parameters were overestimated by MDCT both w and w/o ST. SNR and CNR were significantly higher in the scans w/o ST. Significant correlations between microCT and MDCT results were found for bone fraction (r = 0.90 w/o ST, r = 0.84 w ST), trabecular number, and separation. RMS ranged from 10% to 15% for MDCT w/o ST and from 10% to 17% for MDCT w ST. Only bone fraction showed significantly different RMS and correlations for scans w/o vs. w ST (P < 0.05). This study showed that MDCT is able to visualize trabecular bone structure in an in vivo-like setting at skeletal sites within the torso such as the proximal femur. Even though ST scatter compromises image quality substantially, the major characteristics of the trabecular network can still be appreciated and quantified.

Targeted ablation of osteocytes induces osteoporosis with defective mechanotransduction

Bone remodeling is performed by osteoclasts and osteoblasts at the bone surface. Inside of bone is a network of numerous osteocytes, whose specific function has remained an enigma. Here we describe a transgenic mouse model in which inducible and specific ablation of osteocytes is achieved in vivo through targeted expression of diphtheria toxin (DT) receptor. Following a single injection of DT, approximately 70%-80% of the osteocytes, but apparently no osteoblasts, were killed. Osteocyte-ablated mice exhibited fragile bone with intracortical porosity and microfractures, osteoblastic dysfunction, and trabecular bone loss with microstructural deterioration and adipose tissue proliferation in the marrow space, all of which are hallmarks of the aging skeleton. Strikingly, these "osteocyte-less" mice were resistant to unloading-induced bone loss, providing evidence for the role of osteocytes in mechanotransduction. Thus, osteocytes represent an attractive target for the development of diagnostics and therapeutics for bone diseases, such as osteoporosis.

Overexpression of gamma-glutamyltransferase in transgenic mice accelerates bone resorption and causes osteoporosis

We previously identified gamma-glutamyltransferase (GGT) by expression cloning as a factor inducing osteoclast formation in vitro. To examine its pathogenic role in vivo, we generated transgenic mice that overexpressed GGT in a tissue-specific manner utilizing the Cre-loxP recombination system. Systemic as well as local production of GGT accelerated osteoclast development and bone resorption in vivo by increasing the sensitivity of bone marrow macrophages to receptor activator of nuclear factor-kappaB ligand, an essential cytokine for osteoclastogenesis. Mutated GGT devoid of enzyme activity was as potent as the wild-type molecule in inducing osteoclast formation, suggesting that GGT acts not as an enzyme but as a cytokine. Recombinant GGT protein increased receptor activator of nuclear factor-kappaB ligand expression in marrow stromal cells and also stimulated osteoclastogenesis from bone marrow macrophages at lower concentrations. Thus, GGT is implicated as being involved in diseases characterized by accelerated osteoclast development and bone destruction and provides a new target for therapeutic intervention.

The vertebral fracture cascade in osteoporosis: a review of aetiopathogenesis

Once an initial vertebral fracture is sustained, the risk of subsequent vertebral fracture increases significantly. This phenomenon has been termed the "vertebral fracture cascade". Mechanisms underlying this fracture cascade are inadequately understood, creating uncertainty in the clinical environment regarding prevention of further fractures. The cascade cannot be explained by low bone mass alone, suggesting that factors independent of this parameter contribute to its aetiopathogenesis. This review explores physiologic properties that may help to explain the vertebral fracture cascade. Differences in bone properties, including bone mineral density and bone quality, between individuals with and those without osteoporotic vertebral fractures are discussed. Evidence suggests that non-bone parameters differ between individuals with and those without osteoporotic vertebral fractures. Spinal properties, including vertebral macroarchitecture, intervertebral disc integrity, spinal curvature and spinal loading are compared in these groups of individuals. Cross-sectional studies also indicate that neurophysiologic properties, particularly trunk control and balance, are affected by the presence of a vertebral fracture. This review provides a synthesis of the literature to highlight the multi-factorial aetiopathogenesis of the vertebral fracture cascade. With a more comprehensive understanding of the mechanisms underlying this clinical problem, more effective preventative strategies may be developed to offset the fracture cascade.